2019-2024 Ford Puma SUV Rear View Camera User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Rear View Camera for Your Ford Puma SUV 2019-2024

Rear View CameraNote: When towing, the camera only seesWHAT IS THE REAR VIEWwhat you are towing. This might not provideCAMERAadequate coverage and you might not seesome objects. In some vehicles, the guideThe rear view camera provides a videolines may disappear when you connect theimage of the area behind your vehicle whentrailer tow transmission is in reverse (R). Duringoperation, guide lines appear in the displayREAR VIEW CAMERAthat represents the path of your vehicleand proximity to objects behind system may not correctly operate inREAR VIEW CAMERAany of the following conditions:PRECAUTIONS• Nighttime or dark areas if the reverselamps are not operating.• If the camera is obstructed. Clean theWARNING: The rear view cameralens with a soft, lint-free cloth andsystem is a reverse aid supplementnon-abrasive that still requires the driver to use• The camera is misaligned due toit in conjunction with the interior anddamage to the rear of your mirrors for maximum : Objects that are closeLOCATING THE REAR VIEWto either corner of the bumper or underCAMERAthe bumper, might not be seen on thescreen due to the limited coverage of thecamera : Reverse your vehicleslowly. Failure to follow this instructioncould result in the loss of control of yourvehicle, personal injury or death.E249202The rear view camera is on the : Use caution when therear cargo door is ajar. If the rear cargoREAR VIEW CAMERA GUIDEdoor is ajar, the camera will be out ofposition and the video image could beLINESincorrect. All guide lines disappear whenthe rear cargo door is ajar. Failure tofollow this instruction could result inWARNING: Objects above thepersonal may not be visible. Check thearea behind your vehicle when : Do not switch thecamera features on or off when yourvehicle is : Active guide lines are only availablewhen the transmission is in reverse (
Rear View Camera
Note: When towing, the camera only sees
WHAT IS THE REAR VIEW
what you are towing. This might not provide
CAMERA
adequate coverage and you might not see
some objects. In some vehicles, the guide
The rear view camera provides a video
lines may disappear when you connect the
image of the area behind your vehicle when
trailer tow connector.
the transmission is in reverse (R). During
operation, guide lines appear in the display
REAR VIEW CAMERA
that represents the path of your vehicle
and proximity to objects behind it.
LIMITATIONS
The system may not correctly operate in
REAR VIEW CAMERA
any of the following conditions:
PRECAUTIONS
• Nighttime or dark areas if the reverse
lamps are not operating.
• If the camera is obstructed. Clean the
WARNING: The rear view camera
lens with a soft, lint-free cloth and
system is a reverse aid supplement
non-abrasive cleaner.
device that still requires the driver to use
• The camera is misaligned due to
it in conjunction with the interior and
damage to the rear of your vehicle.
exterior mirrors for maximum coverage.
WARNING: Objects that are close
LOCATING THE REAR VIEW
to either corner of the bumper or under
CAMERA
the bumper, might not be seen on the
screen due to the limited coverage of the
camera system.
WARNING: Reverse your vehicle
slowly. Failure to follow this instruction
could result in the loss of control of your
vehicle, personal injury or death.
E249202
The rear view camera is on the liftgate.
WARNING: Use caution when the
rear cargo door is ajar. If the rear cargo
REAR VIEW CAMERA GUIDE
door is ajar, the camera will be out of
position and the video image could be
LINES
incorrect. All guide lines disappear when
the rear cargo door is ajar. Failure to
follow this instruction could result in
WARNING: Objects above the
personal injury.
camera may not be visible. Check the
area behind your vehicle when necessary.
WARNING: Do not switch the
camera features on or off when your
vehicle is moving.
Note: Active guide lines are only available
when the transmission is in reverse (R).
244
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Rear View CameraThe fixed and active guide lines fade in andout depending on the steering wheelposition. The active guide lines do notdisplay when the steering wheel positionis caution while reversing. Objects in thered zone are closest to your vehicle andobjects in the green zone are farther get closer to your vehicle as theymove from the green zone to the yellow orred zones. Use the side view mirrors andrear view mirror to get better coverage onboth sides and rear of your the vehicle battery is disconnected, theguidelines are not fully functional directlyafter the battery is reconnected. Theguidelines become fully functional afteryou drive your vehicle forward as straightas possible for five minutes at a minimumspeed of 50 km/h (31 mph).REAR VIEW CAMERASETTINGSE306774ZOOMING THE REAR VIEWAActive guide IN AND guide line: Green : When manual zoom isDFixed guide line: Yellow , the full area behind your vehicle maynot show. Be aware of your surroundingsEFixed guide line: Red using the manual zoom settings for this feature areActive guide lines only show with fixedzoom in (+) and zoom out (-). Press theguide lines. To use active guide lines, turnsymbol on the camera screen to changethe steering wheel to point the guide linesthe view. The default setting is zoom an intended path. If the steeringwheel position changes while reversing,This allows you to get a closer view of anyour vehicle might deviate from theobject behind your vehicle. The zoomedintended keeps the bumper in the image toprovide a reference. The zoom is onlyactive while the transmission is in reverse(R).245Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Rear View Camera
The fixed and active guide lines fade in and
out depending on the steering wheel
position. The active guide lines do not
display when the steering wheel position
is straight.
Use caution while reversing. Objects in the
red zone are closest to your vehicle and
objects in the green zone are farther away.
Objects get closer to your vehicle as they
move from the green zone to the yellow or
red zones. Use the side view mirrors and
rear view mirror to get better coverage on
both sides and rear of your vehicle.
If the vehicle battery is disconnected, the
guidelines are not fully functional directly
after the battery is reconnected. The
guidelines become fully functional after
you drive your vehicle forward as straight
as possible for five minutes at a minimum
speed of 50 km/h (31 mph).
REAR VIEW CAMERA
SETTINGS
E306774
ZOOMING THE REAR VIEW
A
Active guide lines.
CAMERA IN AND OUT
B
Centerline.
C
Fixed guide line: Green zone.
WARNING: When manual zoom is
D
Fixed guide line: Yellow zone.
on, the full area behind your vehicle may
not show. Be aware of your surroundings
E
Fixed guide line: Red zone.
when using the manual zoom feature.
F
Rear bumper.
Selectable settings for this feature are
Active guide lines only show with fixed
zoom in (+) and zoom out (-). Press the
guide lines. To use active guide lines, turn
symbol on the camera screen to change
the steering wheel to point the guide lines
the view. The default setting is zoom off.
toward an intended path. If the steering
wheel position changes while reversing,
This allows you to get a closer view of an
your vehicle might deviate from the
object behind your vehicle. The zoomed
intended path.
image keeps the bumper in the image to
provide a reference. The zoom is only
active while the transmission is in reverse
(R).
245
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Rear View CameraNote: Manual zoom is only available whenIf you switch this feature on, the imagethe transmission is in reverse (R).continues to display when you shift fromreverse (R) until:Note: Only the centerline shows when you• You shift to a forward gear and theenable manual speed sufficiently increases.• You shift in to park (P).SWITCHING REAR VIEW CAMERAOBJECT DISTANCE INDICATORON AND OFFE190459You can switch this feature on or off in the system detects an object, itdisplays red, yellow and green distanceindicators on the information REAR VIEW CAMERADELAY ON AND OFFYou can switch this feature on or off usingthe touchscreen. The default setting is Settings (page 448).246Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
Rear View Camera
Note: Manual zoom is only available when
If you switch this feature on, the image
the transmission is in reverse (R).
continues to display when you shift from
reverse (R) until:
Note: Only the centerline shows when you
• You shift to a forward gear and the
enable manual zoom.
vehicle speed sufficiently increases.
• You shift in to park (P).
SWITCHING REAR VIEW CAMERA
OBJECT DISTANCE INDICATOR
ON AND OFF
E190459
You can switch this feature on or off in the
settings.
When the system detects an object, it
displays red, yellow and green distance
indicators on the information display.
SWITCHING REAR VIEW CAMERA
DELAY ON AND OFF
You can switch this feature on or off using
the touchscreen. The default setting is off.
See Settings (page 448).
246
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Related Topics

Popular Owner Manuals