Maintenance
Use the correct specification bulb. See
Exterior Bulb Specification Chart (page
374).
2
You must remove the rear lamp assembly
prior to replacing any bulb. See
1
Removing a Rear Lamp Assembly (page
375).
Note: LED lamps are not serviceable. See
an authorized dealer if they fail.
E332983
2
1.
Turn the bulb holder counterclockwise
1
and remove it.
2. Press the bulb in and turn the bulb
counterclockwise to remove it.
3. To install, reverse the removal
procedure.
CHANGING A REVERSING LAMP
E332984
BULB
1.
Turn the bulb holder counterclockwise
and remove it.
WARNING: Switch the lamps and
2. Press the bulb in and turn the bulb
the ignition off. Failure to follow this
counterclockwise to remove it.
warning could result in serious personal
3. To install, reverse the removal
injury.
procedure.
WARNING: Make sure the bulbs
have cooled down before removing
them. Failure to follow this warning could
result in serious personal injury.
INTERIOR BULBS
INTERIOR BULB SPECIFICATION CHART
Bulb
Specification
Power (Watts)
Glove compartment lamp.
T-3.
2.6
Vanity mirror lamp.
T5.
1.3
Note: LED lamps are not serviceable. See an authorized dealer if they fail.
379
Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing
English 
