Get Windows -> Global Opening and Closing Guide for Ford Puma SUV 2019-2024

Windows

One-Touch Open

OPENING AND CLOSING THE

WINDOWS

Fully press the window control switch and

release it. Press again or lift it to stop the

window.

WARNING: Do not leave children

One-Touch Close

or pets unattended in your vehicle and

do not let children play with the power

Fully lift the window control switch and

windows. Failure to follow this

release it. Press again or lift it to stop the

instruction could result in personal injury

window.

or death.

Resetting One-Touch Close

WARNING: When closing the

Carry out all steps within 30 seconds of

power windows, verify that they are free

starting the sequence.

of obstructions and make sure children

and pets are not in the proximity of the

1. Close the window.

window openings. Failure to follow this

2. Press and hold the window control

instruction could result in personal injury

switch until the window is fully open.

or death.

Keep the window control switch

pressed for a few seconds.

WARNING: If an obstruction is

3. Lift and hold the window control switch

detected, release the switch and reverse

until the window is fully closed. Keep

the window immediately. Failure to

the window control switch held for a

follow this instruction could result in

few seconds.

personal injury or death.

4. Press and hold the window control

WARNING: Do not leave a key or

switch until the window is fully open.

remote control unattended in the vehicle.

Keep the window control switch

Children or pets could operate the power

pressed for a few seconds.

windows and could become trapped in

5. Lift and hold the window control switch

a closing window. Failure to follow this

until the window is fully closed. Keep

instruction could result in personal injury

the window control switch held for a

or death.

few seconds.

Note: Repeat the procedure if the window

Press the window control switch

does not close when you use one-touch.

to open the window. Lift the

window control switch to close

the window.

GLOBAL OPENING AND

Note: The power windows operate with the

CLOSING

ignition on, and for several minutes after you

switch the ignition off or until you open a

WHAT IS GLOBAL OPENING AND

front door.

CLOSING

To reduce wind noise or pulsing noise when

one window is open, slightly open the

You can use the remote control to operate

opposite window.

the windows with the ignition off.

107

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Windows

USING GLOBAL OPENING

SWITCHING GLOBAL OPENING ON

AND OFF - VEHICLES WITH: SYNC

Press and release the unlock button on

the remote control.

Press Settings on the touchscreen.

2. Press and hold the unlock button on

the remote control.

2. Press Vehicle.

3. Release the button when the windows

3. Press Windows.

and moonroof start to open.

4. Switch Global open on or off.

Note: The moonroof stops in the vent

position.

USING GLOBAL CLOSING

Press the lock or the unlock button on the

remote control to stop global opening.

WARNING: When closing the

Note: You can use global opening for a

power windows, verify they are free of

short period of time when you unlock your

obstruction and make sure that children

vehicle using the remote control.

and pets are not in the proximity of the

window openings.

SWITCHING GLOBAL OPENING ON

AND OFF - VEHICLES WITH: 4.2

Press and hold the lock button on the

INCH INSTRUMENT CLUSTER

remote control.

DISPLAY SCREEN/SYNC 2.5

2. Release the button when the windows

and moonroof start to close.

Using the information display controls

on the steering wheel, select Settings.

Press the lock or the unlock button on the

2. Select Vehicle settings.

remote control to stop global closing.

3. Select Windows.

Note: Bounce-back is on during global

closing. See What Is Window

4. Switch Global open on or off.

Bounce-Back (page 109).

SWITCHING GLOBAL OPENING ON

SWITCHING GLOBAL CLOSING ON

AND OFF - VEHICLES WITH: 12.3

AND OFF - VEHICLES WITH: 4.2

INCH INSTRUMENT CLUSTER

DISPLAY SCREEN/SYNC 2.5

Press the menu button on the steering

Using the information display controls

wheel to enter the information display

on the steering wheel, select Settings.

main menu.

2. Select Vehicle settings.

Select Settings.

3. Select Windows.

Select Vehicle.

4. Switch Global close on or off.

Select Windows.

Switch Global open on or off.

108

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Windows

SWITCHING GLOBAL CLOSING ON

2. Lift the window control switch within

AND OFF - VEHICLES WITH: 12.3

five seconds to override bounce-back

INCH INSTRUMENT CLUSTER

and close the window. Bounce-back

DISPLAY SCREEN/SYNC 2.5

is now disabled and you can close the

window manually.

Press the menu button on the steering

Note: The window goes past the point of

wheel to enter the information display

resistance and you can fully close it.

main menu.

Note: If the window does not close, have

Select Settings.

your vehicle checked as soon as possible.

Select Vehicle.

Select Windows.

RESETTING WINDOW BOUNCE-

BACK

Switch Global close on or off.

SWITCHING GLOBAL CLOSING ON

WARNING: Bounce-back is off until

AND OFF - VEHICLES WITH: SYNC

you reset the memory. Take care when

closing the windows to avoid personal

injury or damage to your vehicle.

Press Settings on the touchscreen.

Press Vehicle.

If you have disconnected the battery, you

Press Windows.

must reset the bounce-back memory

separately for each window.

Switch Global close on or off.

Carry out all steps within 30 seconds of

starting the sequence.

WINDOW BOUNCE-BACK

1. Close the window.

WHAT IS WINDOW BOUNCE-BACK

2. Press and hold the window control

switch until the window is fully open.

The window stops and reverses if it detects

Keep the switch pressed for a few

an obstruction when closing.

seconds.

3. Lift and hold the switch until the

OVERRIDING WINDOW BOUNCE-

window is fully closed. Keep the switch

BACK

held for a few seconds.

4. Press and hold the switch until the

window is fully open. Keep the switch

WARNING: If you override

pressed for a few seconds.

bounce-back, the window does not

5. Lift and hold the switch until the

reverse if it detects an obstacle. Take

window is fully closed. Keep the switch

care when closing the windows to avoid

held for a few seconds.

personal injury or damage to your

Note: Repeat the procedure if the window

vehicle.

does not close when you use one-touch.

Close the window until it reaches the

point of resistance and let it reverse.

109

Puma (CF7) Vehicles Built From: 27-03-2023, CG3833en enGBR, Edition date: 202301, First-Printing

Windows -> Global Opening and Closing for Your Ford Puma SUV 2019-2024

Related Topics

Popular Owner Manuals

Latest Owner Manuals