Keyless Entry -> Settings & Operation for Your Ford Puma SUV Second Generation (2019-2026)

Keyless Entry  
4. Switch KeyFree on and off.  
KEYLESSENTRYLIMITATIONS  
Switching Keyless Entry On and  
Off - Vehicles With: 12.3 Inch  
Instrument Cluster Display Screen  
1. Press the menu button on the steering  
wheel to enter the information display  
main menu.  
2. Select Settings.  
3. Select Vehicle.  
4. Select Locks.  
5. Select KeyFree.  
6. Press and hold the OK button until a  
confirmation message appears in the  
information display.  
E78276  
A valid passive key must be within one of  
the three external detection ranges. These  
are approximately 1.5 m (5 ft) from the  
front door handles and the liftgate.  
Reprogramming the Unlocking  
Function - Vehicles With: 4.2 Inch  
Instrument Cluster Display Screen  
You can program the unlocking function  
so that only the driver door unlocks when  
you touch the unlock sensor on the exterior  
door handle.  
If you program the unlocking function so  
that only the driver door unlocks, the  
following occurs:  
The system could not function if:  
The passive key remains stationary for  
about a minute.  
The vehicle battery has no charge.  
The passive key battery has no charge.  
The passive key frequencies are  
jammed.  
If you open the driver door first, all  
other doors remain locked. You can  
unlock all of the other doors from inside  
your vehicle using the power door lock  
control on the driver door. You can  
unlock individual doors by pulling the  
interior door handles on those doors.  
The passive key is too close to metal  
objects or electronic devices, for  
example keys or a cell phone.  
KEYLESS ENTRY SETTINGS  
If you open any other door first, all  
Switching Keyless Entry On and  
Off - Vehicles With: 4.2 Inch  
other doors and the liftgate unlock.  
Instrument Cluster Display Screen  
You can change between the unlocking  
modes in the information display.  
1. Using the information display controls  
1. Using the information display controls  
on the steering wheel, select Settings.  
on the steering wheel, select Settings.  
2. Select Vehicle settings.  
3. Select Locks.  
2. Select Vehicle settings.  
3. Select Locks.  
67  
Puma (CF7) Vehicles Built From: 21-09-2020 Vehicles Built Up To: 14-03-2021, CG3833en enGBR, Edition date: 202007, First-Printing  
Keyless Entry  
4. Select Unlocking.  
5. Select All doors or Driver's door.  
Reprogramming the Unlocking  
Function - Vehicles With: 12.3 Inch  
Instrument Cluster Display Screen  
You can program the unlocking function  
so that only the driver door unlocks when  
you touch the unlock sensor on the exterior  
door handle.  
If you program the unlocking function so  
that only the driver door unlocks, the  
following occurs:  
E248553  
Touch the unlock sensor to unlock your  
vehicle and disarm the alarm. The  
direction indicators flash. Do not touch the  
lock sensor on the top of the door handle.  
Keep the door handle clean to make sure  
the system correctly operates.  
After unlocking the doors with the unlock  
sensor, there is a brief delay before you can  
lock your vehicle. When the delay period  
is over, you can lock the doors again,  
provided the passive key is within the  
respective detection range.  
If you open the driver door first, all  
other doors remain locked. You can  
unlock all of the other doors from inside  
your vehicle using the power door lock  
control on the driver door. You can  
unlock individual doors by pulling the  
interior door handles on those doors.  
Locking the Doors  
Lock sensors are on the top of the exterior  
front door handles.  
If you open any other door first, all  
other doors and the liftgate unlock.  
You can change between the unlocking  
modes in the information display.  
1. Press the menu button on the steering  
wheel to enter the information display  
main menu.  
E248554  
2. Select Settings.  
Touch a lock sensor once to lock your  
vehicle and arm the alarm. The direction  
indicators flash.  
3. Select Vehicle.  
4. Select Locks.  
5. Select Unlocking.  
6. Select All doors or Driver's door.  
Keep the door handle clean to make sure  
the system correctly operates.  
Note: Your vehicle does not automatically  
lock. If you do not touch a lock sensor your  
vehicle remains unlocked.  
LOCKING AND UNLOCKING  
THE DOORS USING KEYLESS  
ENTRY  
Unlocking the Doors  
Unlock sensors are on the back of the  
exterior front door handles.  
68  
Puma (CF7) Vehicles Built From: 21-09-2020 Vehicles Built Up To: 14-03-2021, CG3833en enGBR, Edition date: 202007, First-Printing