2023-2026 Honda Civic 4 Door Features -> Audio System Basic Operation User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Features -> Audio System Basic Operation for Your Honda Civic 4 Door Eleventh Generation (2023-2026)

Audio System Basic Operation  
Models with 7-in. Color Touchscreen  
1Audio System Basic Operation  
To use the audio system, the power mode must be in ACCESSORY or ON.  
Use the selector knob or MENU button to  
access some audio functions.  
These indications are used to show how to operate  
the selector knob.  
Selector Knob  
Rotate  
Press  
to select.  
to enter.  
Press to switch between the normal and  
extended display for some functions.  
Menu Items  
2 Adjust Clock P. 174  
2 Adjusting the Sound P. 265  
2 Display Setup P. 266  
2 Customized Features P. 382  
(Back)  
Button  
MENU Button  
Selector knob: Rotate left or right to scroll  
Press the buttons on the steering wheel to change  
any audio setting.  
Menu Display  
through the available choices. Press  
your selection.  
to set  
2 Audio Remote Controls P. 260  
MENU button: Press to display the menu  
screen.  
Touchscreen operation  
•
Use simple gestures - including touching, swiping  
and scrolling - to operate certain audio functions.  
Some items may be grayed out during driving to  
reduce the potential for distraction.  
(Back) button: Press to go back to the  
previous display.  
•
•
•
You can select them when the vehicle is stopped.  
Wearing gloves may limit or prevent touchscreen  
response.  
You can change the touchscreen sensitivity setting.  
2 Customized Features P. 382  
264  
uuAudio System Basic OperationuAdjusting the Sound  
Adjusting the Sound  
1. Select an audio source.  
2. Press the MENU button.  
3. Select Sound Settings.  
1Adjusting the Sound  
The Speed Volume Compensation (SVC) adjusts the  
volume level based on the vehicle speed. As you go  
faster, audio volume increases. As you slow down,  
audio volume decreases.  
Select an item from the following choices:  
• Bass / Treble: Bass, Midrange, Treble  
• Balance / Fader: Balance, Fader  
• Speed Volume Compensation: Sets the  
amount of volume increase.  
265  
uuAudio System Basic OperationuDisplay Setup  
Display Setup  
You can set the screen brightness separately for Day and Night modes.  
1Changing the Screen Brightness  
Changing the Screen Brightness  
■
You can change the Contrast and Black Level  
settings in the same manner.  
1. Press the MENU button.  
2. Select Display Adjustment.  
3. Select Day or Night.  
You can adjust the settings by sliding or tapping on  
the bar.  
4. Select the setting you want.  
266  
uuAudio System Basic OperationuPlaying AM/FM Radio  
Playing AM/FM Radio  
Audio/Information Screen  
VOL/  
AUDIO (Volume/Power) Knob  
Selector Knob  
Press to turn the audio system on and  
off.  
Turn to tune the radio frequency.  
Press, and then turn to select an item.  
After that, press again to make your  
selection.  
Turn to adjust the volume.  
Seek Buttons  
MENU Button  
Press  
or  
to search the  
selected band up or down for a station  
with a strong signal.  
Press to display the menu items.  
RADIO Button  
(Back) Button  
Press to select a band.  
Press to go back to the previous display.  
Preset Icons  
Tune the radio frequency for preset memory. Select and  
hold the preset icon to store that station.  
Select  
>
to display beyond preset 5.  
Continued  
267  
uuAudio System Basic OperationuPlaying AM/FM Radio  
1Playing AM/FM Radio  
Radio Data System (RDS)  
■
Provides text data information related to your selected RDS capable FM station.  
Stereo reproduction in AM is not available.  
You can store 12 AM stations and 12 FM stations into  
the preset memory.  
■
To find an RDS station from Station List  
1. Press while listening to an FM station.  
2. Select the station.  
Switching the Audio Mode  
Press the audio source selecting button on the  
steering wheel.  
■
Update List  
Updates your available station list at any time.  
1. Press while listening to an FM station.  
2. Select Refresh.  
2 Audio Remote Controls P. 260  
1Radio Data System (RDS)  
■
Radio text  
Displays the radio text information of the selected RDS station.  
1. Select Text.  
When you select an RDS-capable FM station, the RDS  
automatically turns on, and the station name is  
displayed under the frequency. However, when the  
signals of that station become weak, the station  
name disappears.  
■
Scan  
Samples each of the strongest stations on the selected band for 10 seconds.  
1. Select Scan.  
To turn off scan, select Stop or press the  
button.  
268  
uuAudio System Basic OperationuPlaying an iPod  
Playing an iPod  
Using your USB connector, connect the iPod to the USB port, then select the USB  
mode.  
2 USB Port(s) P. 257  
Audio/Information Screen  
Album Art  
USB Indicator  
Appears when an iPod is connected.  
VOL/ AUDIO (Volume/Power) Knob  
Selector Knob  
Press to turn the audio system on and  
off.  
Turn to change songs.  
Press and turn to select an item, then  
press to set your selection.  
Turn to adjust the volume.  
Track Buttons  
MENU Button  
Press  
or  
to change songs.  
Press to display the menu items.  
Press and hold to move rapidly within  
a song.  
Play/Pause Icon  
(Back) Button  
Select to play/pause a song.  
Press to go back to the previous display.  
Repeat Icon  
Shuffle Icon  
Select to repeat the current file.  
Select to play all files in the current  
category in random order.  
MEDIA Button  
Press to select iPod (if connected).  
Continued  
269  
uuAudio System Basic OperationuPlaying an iPod  
1Playing an iPod  
How to Select a Song from the iPod Music List  
■
Available operating functions vary on models or  
versions. Some functions may not be available on the  
vehicle's audio system.  
1. Press  
to display the iPod music list.  
If there is a problem, you may see an error message  
on the audio/information screen.  
2 iPod/USB Flash Drive P. 359  
Category  
Selection  
2. Select a category.  
Item  
Selection  
3. Select an item.  
u Select an item repeatedly until a desired  
item you want to listen is displayed.  
270  
uuAudio System Basic OperationuPlaying an iPod  
1How to Select a Play Mode  
How to Select a Play Mode  
■
You can select repeat and shuffle modes when playing a song.  
Play Mode Menu Items  
Shuffle  
■
Shuffle/Repeat  
Shuffle off: Shuffle mode to off.  
Shuffle All Songs: Plays all available songs in  
a selected list in random order.  
Select shuffle or repeat icon repeatedly until a  
desired mode.  
Repeat  
Repeat off: Repeat mode to off.  
Repeat all: Repeats the all songs.  
Repeat Song: Repeats the current song.  
Repeat Icon  
Shuffle Icon  
■
To turn off a play mode  
Select the mode you want to turn off.  
271  
uuAudio System Basic OperationuPlaying a USB Flash Drive  
Playing a USB Flash Drive  
Your audio system reads and plays sound files on a USB flash drive in either MP3,  
WMA, AAC*1, FLAC, or WAV format.  
Connect your USB flash drive to the USB port, then press the MEDIA button.  
2 USB Port(s) P. 257  
Audio/Information Screen  
USB Indicator  
Appears when a USB  
flash drive is connected.  
VOL/ AUDIO (Volume/Power) Knob  
Selector Knob  
Press to turn the audio system on and  
off.  
Turn to change files.  
Press and turn to select an item,  
then press to set your selection.  
Turn to adjust the volume.  
Track Buttons  
MENU Button  
Press  
or  
to change files.  
Press to display the menu items.  
Press and hold to move rapidly  
within a track.  
Play Icon  
(Back) Button  
Select to play a file.  
Press to go back to the previous display.  
Pause Icon  
Random Icons  
Select to pause a file.  
Select to play all files in the current category in  
random order.  
Repeat Icons  
Select to repeat the current file.  
MEDIA Button  
Press to select USB flash drive (if connected).  
*1:Only AAC format files recorded with iTunes are playable on this unit.  
272  
uuAudio System Basic OperationuPlaying a USB Flash Drive  
1Playing a USB Flash Drive  
How to Select a File from a Folder  
■
Use the recommended USB flash drives.  
2 General Information on the Audio System  
P. 361  
1. Press  
to display a folder list.  
Files in WMA format protected by digital rights  
management (DRM) cannot be played.  
The audio system displays Unplayable File, and then  
skips to the next file.  
If there is a problem, you may see an error message  
on the audio/information screen.  
Folder  
Selection  
2 iPod/USB Flash Drive P. 359  
2. Select a folder.  
Track  
Selection  
3. Select a file.  
Continued  
273  
uuAudio System Basic OperationuPlaying a USB Flash Drive  
1How to Select a Play Mode  
How to Select a Play Mode  
■
You can select repeat and random modes when playing a file.  
Play Mode Menu Items  
Random  
■
Random/Repeat  
Select random or repeat icon.  
Random All Tracks: Plays all files in random  
order.  
Random in Folder: Plays all files in the current  
folder in random order.  
Repeat  
Repeat track: Repeats the current file.  
Repeat folder: Repeats all files in the current  
folder.  
Repeat Icons  
Random Icons  
■
To turn off a play mode  
Select the mode you want to turn off.  
274  
uuAudio System Basic OperationuPlaying Bluetooth® Audio  
Playing Bluetooth® Audio  
Your audio system allows you to listen to music from your Bluetooth-compatible  
phone.  
1Playing Bluetooth® Audio  
Not all Bluetooth-enabled phones with streaming  
audio capabilities are compatible with the system.  
For a list of compatible phones:  
This function is available when the phone is paired and connected to the vehicle's  
Bluetooth® HandsFreeLink® (HFL) system.  
•
U.S.: Visit automobiles.honda.com/handsfreelink/,  
or call 1-888-528-7876.  
2 Phone Setup P. 448  
•
Canada: For more information on smartphone  
compatibility, call 1-855-490-7351.  
Bluetooth Indicator  
Audio/Information Screen  
Appears when your phone  
is connected to HFL.  
In some states, it may be illegal to perform some data  
device functions while driving.  
VOL/ AUDIO  
(Volume/Power) Knob  
Selector Knob  
Turn to change files.  
Press and turn to  
select an item, then  
press to set your  
selection.  
Press to turn the audio  
system on and off.  
Only one phone can be used with HFL at a time.  
When there are more than two paired phones in the  
vehicle, the system automatically connects to the  
prioritized phone. You can assign priority to a phone  
in the Bluetooth Settings menu.  
Turn to adjust the  
volume.  
MENU Button  
2 HFL Menus P. 446  
Track Buttons  
Press to display the  
menu items.  
To change the searched phone manually, select Go  
to Device List.  
Press or  
change files.  
to  
(Back) Button  
Play/Pause Icon  
Press to go back to  
the previous display.  
In some cases, the name of the artist, album, or track  
may not appear correctly.  
Select to play/pause a file.  
Shuffle Icon  
Repeat Icon  
Select to play all files in the current  
category in random order.  
Select to repeat the current file.  
Some functions may not be available on some devices.  
MEDIA Button  
Press to select Bluetooth® Audio.  
If a phone is currently connected via Apple CarPlay or  
Android Auto, Bluetooth® Audio from that phone is  
unavailable. However, a second previously paired  
phone can stream Bluetooth® Audio by selecting  
Audio from the Bluetooth® device list.  
2 Phone Setup P. 448  
Continued  
275  
uuAudio System Basic OperationuPlaying Bluetooth® Audio  
1To Play Bluetooth® Audio Files  
To Play Bluetooth® Audio Files  
■
To play the audio files, you may need to operate your  
phone. If so, follow the phone maker's operating  
instructions.  
1. Make sure that your phone is paired and  
connected to HFL.  
2. Press the MEDIA button until the  
Bluetooth® Audio Source is selected.  
The pause function may not be available on some  
phones.  
If the phone is not recognized, another HFL-  
compatible phone, which is not compatible  
for Bluetooth® Audio, may already be  
connected.  
If any audio device is connected to the USB port, you  
may need to press the MEDIA button repeatedly to  
select the Bluetooth® Audio system.  
Play/Pause Icon  
MEDIA Button  
Switching to another mode pauses the music playing  
from your phone.  
■
To pause or resume a file  
Select the play/pause icon.  
Check the volume setting of your phone if the audio  
volume is too loud or soft.  
276  
uuAudio System Basic OperationuPlaying Bluetooth® Audio  
1How to Select a Song from the Music Search List  
How to Select a Song from the Music Search List  
■
Depending on the Bluetooth® device you connect,  
some or all of the categories may not be displayed.  
1. Press  
to display the music search list.  
Category  
Selection  
2. Select a category.  
Item  
Selection  
3. Select an item.  
u Select an item repeatedly until a desired  
item you want to listen to is displayed.  
Continued  
277  
uuAudio System Basic OperationuPlaying Bluetooth® Audio  
1How to Select a Play Mode  
How to Select a Play Mode  
■
You can select repeat and shuffle modes when playing a song.  
Play Mode Menu Items  
Shuffle  
■
Shuffle/Repeat  
Shuffle off: Shuffle mode to off.  
Shuffle Albums: Plays all available albums in  
a selected list in random order.  
Select shuffle or repeat icon repeatedly until a  
desired mode.  
Shuffle All Songs: Plays all available songs in  
a selected list in random order.  
Repeat  
Repeat off: Repeat mode to off.  
Repeat all: Repeats the all songs.  
Repeat Song: Repeats the current song.  
Repeat Icon  
Shuffle Icon  
Depending on the Bluetooth® device you connect,  
some or all of the functions may not be displayed.  
■
To turn off a play mode  
Select the mode you want to turn off.  
278  
uuAudio System Basic OperationuSiri Eyes Free  
Siri Eyes Free  
You can talk to Siri using the  
(Talk) button on the steering wheel when your  
1Siri Eyes Free  
iPhone is paired to the Bluetooth® HandsFreeLink® (HFL) system.  
2 Phone Setup P. 448  
Check Apple Inc. website for features available for  
Siri.  
We recommend against using Siri other than in Siri  
Eyes Free mode while operating a vehicle.  
1Using Siri Eyes Free  
Using Siri Eyes Free  
■
Some commands work only on specific phone  
features or apps.  
Appears  
when Siri is  
activated in  
Siri Eyes Free  
While in Siri Eyes Free:  
The display remains the same.  
No feedback or commands  
appear.  
(Talk) Button  
Press until the display changes as shown.  
Press and hold to deactivate Siri Eyes Free.  
279  
uuAudio System Basic OperationuSmartphone Voice Recognition  
Smartphone Voice Recognition  
You can use Smartphone Voice Recognition using the  
steering wheel when your Android phone is paired to the Bluetooth®  
HandsFreeLink® (HFL) system.  
(Talk) button on the  
2 Phone Setup P. 448  
1Using Smartphone Voice Recognition  
Using Smartphone Voice Recognition  
■
Depending on your Android phone, you may need to  
operate your phone.  
Appears  
when  
Smartphone  
Voice  
Some commands work only on specific phone  
features or apps.  
Recognition  
is activated  
While in Smartphone Voice  
Recognition:  
The display remains the same.  
No feedback or commands  
appear.  
(Talk) Button  
Press to activate Smartphone Voice Recognition.  
Press and hold to deactivate Smartphone Voice  
Recognition.  
280  
uuAudio System Basic OperationuApple CarPlay  
Apple CarPlay  
If you connect an Apple CarPlay-compatible iPhone to the system via the front USB,  
you can use the audio/information screen, instead of the iPhone display, to make a  
phone call, listen to music, view maps (navigation), and access messages.  
2 USB Port(s) P. 257  
1Apple CarPlay  
Only iPhone 5 or newer versions with iOS 8.4 or later  
are compatible with Apple CarPlay.  
We recommend using the latest OS.  
Apple CarPlay Menu  
■
Park in a safe place before connecting your iPhone to  
Apple CarPlay and when launching any compatible  
apps.  
Apple CarPlay menu screen  
To directly access the Apple CarPlay phone function,  
press the PHONE button. While connected to Apple  
CarPlay, calls are only made through Apple CarPlay. If  
you want to make a call with HandsFreeLink, turn  
Apple CarPlay OFF or detach the USB cable from your  
iPhone.  
Go back to the  
audio screen  
2 Setting Up Apple CarPlay P. 283  
When your iPhone is connected to Apple CarPlay, it is  
not possible to use the Bluetooth® Audio or  
Bluetooth® HandsFreeLink®. However, other  
previously paired phones can stream audio via  
Bluetooth® while Apple CarPlay is connected.  
2 Phone Setup P. 448  
: Go back to the  
Apple CarPlay  
Dashboard screen  
CONNECT Button  
Press to display Apple CarPlay screen  
Apple CarPlay and Android Auto cannot run at the  
same time.  
: Go back to the  
Apple CarPlay menu  
screen  
For details on countries and regions where Apple  
CarPlay is available, as well as information pertaining  
to function, refer to the Apple homepage.  
Continued  
281  
uuAudio System Basic OperationuApple CarPlay  
■
Phone  
Access the contact list, make phone calls, or listen to voice mail.  
1Apple CarPlay  
Apple CarPlay Operating Requirements &  
Limitations  
Apple CarPlay requires a compatible iPhone with an  
active cellular connection and data plan. Your  
carrier's rate plans will apply.  
■
Messages  
Check and reply to text messages, or have messages read to you.  
■
Music  
Play music stored on your iPhone.  
Changes in operating systems, hardware, software,  
and other technology integral to providing Apple  
CarPlay functionality, as well as new or revised  
governmental regulations, may result in a decrease or  
cessation of Apple CarPlay functionality and services.  
Honda cannot and does not provide any warranty or  
guarantee of future Apple CarPlay performance or  
functionality.  
■
Maps  
Display Apple Maps and use the navigation function just as you would on your  
iPhone.  
It is possible to use 3rd party apps if they are  
compatible with Apple CarPlay. Refer to the Apple  
homepage for information on compatible apps.  
To adjust the ringtone volume, the guidance volume  
of the navigation or Siri, or the audio volume, turn  
the VOL/ AUDIO (Volume/Power) knob while the  
sound you want to adjust is playing.  
282  
uuAudio System Basic OperationuApple CarPlay  
1Setting Up Apple CarPlay  
Setting Up Apple CarPlay  
■
Only initialize Apple CarPlay when you are safely  
parked.  
After you have connected your iPhone to the system via the front USB, use the  
following procedure to set up Apple CarPlay. Use of Apple CarPlay will result in the  
transmission of certain user and vehicle information (such as vehicle location, speed,  
and status) to your iPhone to enhance the Apple CarPlay experience. You will need  
to consent to the sharing of this information on the audio/information screen.  
When Apple CarPlay first detects your iPhone, you  
will need to set up your iPhone. Refer to the  
instruction manual that came with your iPhone.  
You can use the following procedure to disconnect or  
delete the devices connecting Apple CarPlay:  
Press the MENU button  
Select Smartphone SettingsApple CarPlay  
Select device  
Use of user and vehicle information  
The use and handling of user and vehicle information  
transmitted to/from your iPhone by Apple CarPlay is  
governed by the Apple iOS terms and conditions and  
Apple's Privacy Policy.  
Connecting Apple CarPlay Using the USB Cable to the USB Port  
■
1. Connect the iPhone to the USB port using the USB cable.  
2 USB Port(s) P. 257  
u The confirmation screen will be displayed.  
2. Select Yes.  
u If you do not want to connect Apple CarPlay, select No.  
You may change the consent settings under the Smartphone Settings menu.  
Continued  
283  
uuAudio System Basic OperationuApple CarPlay  
1Operating Apple CarPlay with Siri  
Operating Apple CarPlay with Siri  
■
Press the talk button to activate Siri.  
Below are examples of questions and commands for  
Siri.  
•
•
•
•
•
•
What movies are playing today?  
Call dad at work.  
What song is this?  
How's the weather tomorrow?  
Read my latest email.  
Find a table for four tonight in Chicago.  
For more information, please visit  
www.apple.com/ios/siri.  
(Talk) Button:  
To adjust the guidance volume of Siri, turn the VOL/  
AUDIO (Volume/Power) knob while Siri is  
activated.  
Press to activate Siri.  
Press again to  
deactivate Siri.  
284  
uuAudio System Basic OperationuAndroid AutoTM  
Android AutoTM  
1Android AutoTM  
When you connect an Android phone to the audio system via the USB port, Android  
Auto is automatically initiated. When connected via Android Auto, you can use the  
audio/information screen to access the Phone, Google Maps (Navigation), and  
Google Now functions. When you first use Android Auto, a tutorial will appear on  
the screen.  
We recommend that you update Android OS to the  
latest version when using Android Auto.  
Bluetooth A2DP cannot be used while your phone is  
connected to Android Auto.  
We recommend that you complete this tutorial while safely parked before using  
Android Auto.  
To use Android Auto on a smartphone with Android  
9.0 (Pie) or earlier, you need to download the  
Android Auto app from Google Play to your  
smartphone.  
2 USB Port(s) P. 257  
2 Auto Pairing Connection P. 287  
Park in a safe place before connecting your Android  
phone to Android Auto and when launching any  
compatible apps.  
When your Android phone is connected to Android  
Auto, it is not possible to use the Bluetooth® Audio.  
However, other previously paired phones can stream  
audio via Bluetooth® while Android Auto is  
connected.  
2 Phone Setup P. 448  
Apple CarPlay and Android Auto cannot run at the  
same time.  
Android Auto is a trademark of Google LLC.  
Continued  
285  
uuAudio System Basic OperationuAndroid AutoTM  
1Android AutoTM  
Android Auto Menu  
■
For details on countries and regions where Android  
Auto is available, as well as information pertaining to  
function, refer to the Android Auto homepage.  
Android Auto menu screen  
Screens may differ depending on the version of the  
Android Auto app you are using.  
Go back to the  
audio screen  
Android Auto Operating Requirements &  
Limitations  
Android Auto requires a compatible Android phone  
with an active mobile connection and data plan. Your  
carrier's rate plans will apply.  
Changes in operating systems, hardware, software,  
and other technology integral to providing Android  
Auto functionality, as well as new or revised  
governmental regulations, may result in a decrease or  
cessation of Android Auto functionality and services.  
Honda cannot and does not provide any warranty or  
guarantee of future Android Auto performance or  
functionality.  
Go back to the Android  
Auto menu screen  
CONNECT Button  
Press to display Android Auto screen  
• Maps  
Display Google Maps and use the navigation function just as you would with your  
Android phone. When the vehicle is in motion, it is not possible to make keyboard  
entries. Stop the vehicle in a safe location to undertake a search or provide other  
inputs.  
It is possible to use 3rd party apps if they are  
compatible with Android Auto. Refer to the Android  
Auto homepage for information on compatible apps.  
• Phone  
Make and receive phone calls as well as listen to voicemail.  
• Exit  
To adjust the ringtone volume, the guidance volume  
of the navigation or voice recognition, or the audio  
volume, turn the VOL/ AUDIO (Volume/Power)  
knob while the sound you want to adjust is playing.  
•
Operate Android Auto with your voice.  
286  
uuAudio System Basic OperationuAndroid AutoTM  
•
•
You can check Android notifications.  
(Android Auto Home)  
Display useful information organized by Android Auto into simple cards that  
appear just when they're needed.  
Auto Pairing Connection  
■
When you connect an Android phone to the unit via the USB port, Android Auto is  
automatically initiated.  
1Connecting Android Auto Using the USB Cable to the USB Port  
Connecting Android Auto Using the USB Cable to the USB Port  
■
To enable Android Auto after connecting an Android phone to the system, select  
Yes on the screen.  
Only initialize Android Auto when you are safely  
parked. When Android Auto first detects your phone,  
you will need to set up your phone so that auto  
pairing is possible. Refer to the instruction manual  
that came with your phone.  
You may change the consent settings under the Smartphone Settings menu.  
You can use the following procedure to disconnect or  
delete the devices connecting Android Auto after you  
have completed the initial setup:  
Press the MENU button   
Select Smartphone Settings Android Auto   
Select device  
Use of user and vehicle information  
The use and handling of user and vehicle information  
transmitted to/from your phone by Android Auto is  
governed by the Google's Privacy Policy.  
Continued  
287  
uuAudio System Basic OperationuAndroid AutoTM  
1Operating Android Auto with Voice Recognition  
Operating Android Auto with Voice Recognition  
■
Press the  
Below are examples of commands you can give with  
voice recognition:  
(talk) button to operate Android Auto with your voice.  
•
•
•
•
•
•
Reply to text.  
Call my wife.  
Navigate to Honda.  
Play my music.  
Send a text message to my wife.  
Call flower shop.  
For more information, please refer to the Android  
Auto homepage.  
(Talk) Button:  
You can also activate the voice recognition function  
Press to operate  
Android Auto with your  
voice.  
by selecting the  
the screen.  
icon in the lower-right corner of  
Press again to deactivate  
voice recognition.  
To adjust the guidance volume of voice recognition,  
turn the VOL/ AUDIO (Volume/Power) knob while  
the guidance is playing.  
288  
Audio System Basic Operation  
Models with 9-in. Color Touchscreen  
To use the audio system function, the power mode must be in ACCESSORY or ON.  
(Home) button: Press to go to the home  
screen.  
(Back) Button  
(Home) Button  
2 Using the audio/information screen  
P. 291  
(Back) button: Press to go back to the  
previous screen.  
/ (Seek/Track) buttons: Press to  
change songs.  
/
(Seek/Track) Buttons  
289  
uuAudio System Basic OperationuStart Up  
Start Up  
The 9-in. Color Touchscreen starts automatically when you set the power mode to  
ACCESSORY or ON. At start-up, the following screen about the data upload will be  
displayed.  
1Start Up  
Data Sharing Setting  
ON: Available the data communication.  
OFF: Not available the data communication.  
Select OK.  
u If you want to change the settings for  
data upload, select Data Sharing, then  
select the ON/OFF settings on the Data  
Sharing Setting screen.  
u If you do not select OK, the system will  
automatically be switched the home  
screen after a certain period of time.  
u If there is no registered device, select OK  
and the Bluetooth® pairing screen will be  
displayed.  
■
To pair a cell phone (when there is no  
phone paired to the system)  
1. Make sure your phone is in search or  
discoverable mode.  
2. Select Honda CIVIC from your phone.  
u If you want to pair a phone from this  
9-in. Color Touchscreen, select Search  
for Devices, and then select your phone  
when it appears on the list.  
u If you check the box with Do not show  
this again, this screen will not be  
displayed.  
290  
uuAudio System Basic OperationuAudio/Information Screen  
Audio/Information Screen  
Displays the audio status and wallpaper. From this display, you can go to various  
setup options.  
Switching the Display  
■
■
Using the audio/information screen  
1Using the audio/information screen  
Touchscreen operation  
Home Screen  
Button  
•
•
•
•
Use simple gestures - including touching, swiping  
and scrolling - to operate certain audio functions.  
Some items may be grayed out during driving to  
reduce the potential for distraction.  
You can select them when the vehicle is stopped or  
use voice commands.  
Wearing gloves may limit or prevent touchscreen  
response.  
You can change the touchscreen sensitivity setting.  
2 Customized Features P. 390  
All Apps  
Press the button to go to the home screen.  
Select the following icons on the home screen or after selecting  
All Apps.  
■
Phone  
Displays the HFL information.  
2 Bluetooth® HandsFreeLink® P. 463  
■
FM/AM/SiriusXM/USB/Bluetooth Audio  
Displays information for each audio format.  
Continued  
291  
uuAudio System Basic OperationuAudio/Information Screen  
■
General Settings  
Enters the customizing menu screen.  
2 Customized Features P. 390  
■
Navigation  
Displays the navigation screen.  
2 Refer to the Navigation System Manual  
■
HondaLink®  
Displays the HondaLink screen.  
2 HondaLink® P. 337  
■
Apple CarPlay/Android Auto  
Displays the Apple CarPlay or Android Auto.  
2 Apple CarPlay P. 346  
2 Android AutoTM P. 353  
■
Vehicle Settings  
Displays the vehicle settings screen.  
2 Customized Features P. 390  
292  
uuAudio System Basic OperationuAudio/Information Screen  
■
Trip Computer  
Displays the trip computer information.  
• Current Drive tab: Displays the current trip information.  
• Trip A/Trip B tab: Displays information for the current and three previous drives.  
The information is stored every time you reset Trip A/B.  
To reset the Trip A/B, select Settings, then select Delete Trip History.  
To change the setting of how to reset Trip A/B, select Settings, then select “Trip A”  
Reset Timing or “Trip B” Reset Timing.  
■
System Updates  
Updates the software version of the audio system.  
2 System Updates P. 302  
■
Clock  
Displays the clock.  
■
Smart Shortcuts  
Displays the Smart Shortcuts screen.  
2 Smart Shortcuts P. 341  
■
Display Mode  
Displays the brightness bar.  
Continued  
293  
uuAudio System Basic OperationuAudio/Information Screen  
1Wallpaper Setup  
Wallpaper Setup  
■
You can change, store, and delete the wallpaper on the audio/information screen.  
The wallpaper you set up on Clock Faces cannot be  
displayed on the driver information interface.  
•
When importing wallpaper files, the image must be  
in the USB flash drive's root directory.  
■
Import wallpaper  
You can import up to 11 images, one at a time, for wallpaper from a USB flash drive.  
Images in a folder cannot be imported.  
The file name must be less than 64 bytes.  
The file format of the image that can be imported  
is BMP (bmp) or JPEG (jpg).  
•
•
1. Connect the USB flash drive to the USB  
port.  
2 USB Port(s) P. 257  
•
•
The individual file size limit is 10 MB.  
2. Press the  
3. Select Clock.  
button.  
The maximum image size is 4,096 × 2,304 pixels. If  
the image size is less than 1,280 × 720 pixels, the  
image is displayed in the middle of the screen with  
the extra area appearing in black.  
4. Select Settings.  
5. Select Clock Faces.  
•
If the USB flash drive does not have any pictures,  
the No files detected message appears.  
6. Select Add More.  
u The image of the pictures stored in the  
USB flash drive are displayed on the list.  
7. Select a desired picture to import.  
u Multiple pictures can be selected at the  
same time.  
8. Select OK.  
u The selected pictures are displayed.  
9. Select Transfer.  
u It will return to the clock wallpaper  
setting screen.  
294  
uuAudio System Basic OperationuAudio/Information Screen  
■
Select wallpaper  
1. Press the  
1Wallpaper Setup  
button.  
You cannot delete the initial imported wallpapers.  
2. Select Clock.  
3. Select Settings.  
4. Select Clock Faces.  
5. Select a desired picture to set.  
u The preview is displayed on the screen.  
6. Select Save.  
u The clock screen which the wallpaper has been set is displayed.  
■
To view wallpaper once it is set  
1. Press the button.  
2. Select Clock.  
■
Delete wallpaper  
1. Press the button.  
2. Select Clock.  
3. Select Settings.  
4. Select Clock Faces.  
5. Select Delete Photos.  
6. Select a desired picture to delete.  
u Multiple pictures can be selected at the same time.  
7. Select OK.  
u The selected pictures are displayed.  
8. Select Delete.  
u It will return to the clock wallpaper setting screen.  
Continued  
295  
uuAudio System Basic OperationuAudio/Information Screen  
1Home Screen  
Home Screen  
■
■
The home screen has 3 pages. You can add up to 6  
pages.  
To move to the next screen  
Press the button to go directly back to the first  
page of the home screen from any page.  
Swipe  
>
Icon  
<
Icon  
Current page position  
<
>
Selecting  
or  
, or swiping the screen left or right changes to the next screen.  
296  
uuAudio System Basic OperationuAudio/Information Screen  
■
To add app icons on the home screen  
App icons can be added on the home screen.  
1. Press the  
2. Select All Apps.  
1To add app icons on the home screen  
Pre-installed apps may not start up normally. If this  
occurs, you need to reset the system.  
button.  
2 Defaulting All the Settings P. 413  
3. Select the box checked on the desired apps.  
If you perform Factory Data Reset, it may reset all  
the settings to their factory default.  
2 Defaulting All the Settings P. 413  
In case those apps still do not start up normally even  
after Factory Data Reset, contact your dealer.  
Continued  
297  
uuAudio System Basic OperationuAudio/Information Screen  
■
To move icons on the home screen  
You can change location on the home screen.  
1. Press the  
1To move icons on the home screen  
Select Tips to show tips. To hide them, select it again.  
button.  
2. Select and hold an icon.  
u The screen switches to the customization  
screen.  
Select and hold.  
3. Drag and drop the icon to where you want  
it to be.  
4. Select Done.  
u The screen will return to the home  
screen.  
Drag and drop.  
298  
uuAudio System Basic OperationuAudio/Information Screen  
■
To remove icons on the home screen  
You can delete the icons on the home screen.  
1. Press the  
2. Select and hold an icon.  
1To remove icons on the home screen  
You cannot delete the All Apps icon.  
button.  
Apps will not be deleted by deleting the icon on the  
home screen.  
u The screen switches to the customization  
screen.  
Select Tips to show tips. To hide them, select it again.  
Select and  
hold.  
3. Drag and drop the icon you want to remove  
to the header area.  
u The icon is removed from the home  
screen.  
4. Select Done.  
Drag and drop to  
the header area.  
u The screen will return to the home  
screen.  
Continued  
299  
uuAudio System Basic OperationuAudio/Information Screen  
■
To shortcut icons on the home screen  
You can store up to six icons on the bottom of the home screen.  
1. Press the button.  
1To shortcut icons on the home screen  
Select Tips to show tips. To hide them, select it again.  
2. Select and hold an icon.  
u The screen switches to the customization  
screen.  
Select and hold.  
Shortcut  
Icons  
3. Drag and drop the icon you want to store to  
the bottom of the home screen.  
u The icon is shortcut.  
Drag and drop  
to shortcut  
icon.  
4. Select Done.  
u The screen will return to the home  
screen.  
300  
uuAudio System Basic OperationuAudio/Information Screen  
Status Area  
■
1. Select the system status icon.  
u The status area appears.  
2. Select an item to see the details.  
3. Press the button or select the system  
status icon to close the area.  
System Status  
Icon  
Status Area  
301  
uuAudio System Basic OperationuSystem Updates  
System Updates  
The audio system's firmware can be updated with a Wi-Fi connection, or with a USB  
device.  
1How to Update  
How to Update  
■
When the audio system update is available, the notification is shown on the status  
area. Use the following procedure to update the system.  
You can update the system via Wi-Fi, but cannot use  
the captive portal that require login or agreement the  
terms of use on the browser.  
1. Press the button.  
2. Select System Updates.  
Notification  
Your download will be canceled if:  
•
•
Your Wi-Fi connection is severed.  
You stop the engine when the battery is low on  
power.  
u If System Updates is not displayed on  
the home screen, select  
All Apps.  
u The system will check for updates.  
u If the update icon is appeared on the  
home screen, select the status icon.  
2 Status Area P. 301  
Your download will recommence the next time a Wi-  
Fi connection is established.  
For the battery protection, Install While Vehicle Off  
cannot be selected when the battery is low on power.  
If you want to install the updated data, recharge the  
battery or select Install Now.  
3. Select Download.  
u A notification appears on the screen if  
need to user acceptance for download.  
4. Select Install Now or Install While  
Vehicle Off.  
u A notification appears on the screen if  
the update is successful.  
302  
uuAudio System Basic OperationuSystem Updates  
System Updates Settings  
■
The following settings can be set.  
• Automatic Download  
• Version Status  
• Connection Setup  
• Automatic Update*  
• Update History  
■
Automatic download settings  
Use the following procedure to change to the automatic download setting.  
1. Press the button.  
2. Select System Updates.  
u If System Updates is not displayed on the home screen, select  
3. Select Settings.  
4. Select Automatic Download.  
All Apps.  
5. Select the access point, then select Enable.  
u If you do not want to system update automatically, select Disable.  
■
View a version and update status  
Use the following procedure to confirm the version and update status.  
1. Press the button.  
2. Select System Updates.  
u If System Updates is not displayed on the home screen, select  
3. Select Settings.  
4. Select Version Status.  
All Apps.  
* Not available on all models  
Continued  
303  
uuAudio System Basic OperationuSystem Updates  
■
Connection setup  
Use the following procedure to connect to the Internet via a Wi-Fi network.  
1. Press the button.  
2. Select System Updates.  
u If System Updates is not displayed on the home screen, select  
3. Select Settings.  
All Apps.  
4. Select Connection Setup.  
5. Select OK.  
6. Select Change Mode.  
7. Select Network.  
u If the vehicle's Wi-Fi is turned off, select OFF.  
■
Automatic update settings*  
Use the following procedure to change to the automatic update setting.  
1. Press the button.  
2. Select System Updates.  
u If System Updates is not displayed on the home screen, select  
3. Select Settings.  
4. Select Automatic Update.  
All Apps.  
5. Select Accept.  
u If you do not want to system update automatically, select Decline.  
■
View the update history  
Use the following procedure to confirm the update history.  
1. Press the button.  
2. Select System Updates.  
u If System Updates is not displayed on the home screen, select  
3. Select Settings.  
4. Select Update History.  
All Apps.  
* Not available on all models  
304  
uuAudio System Basic OperationuSystem Updates  
How to Update Wirelessly  
■
■
Wireless connection mode setup  
1. Press the  
button.  
2. Select System Updates.  
u If System Updates is not displayed on the home screen, select  
3. Select Settings.  
4. Select Connection Setup.  
All Apps.  
5. Select OK.  
6. Select Change Mode.  
7. Select Network.  
u It will return to the network list.  
8. Select an access point from the network list.  
u If the audio system requires a password, enter a password.  
9. Select Connect.  
■
How to update  
1. Press the button.  
2. Select System Updates.  
u If System Updates is not displayed on the home screen, select  
3. Select via Wireless.  
4. Select Download.  
All Apps.  
u A notification appears on the screen if need to user acceptance for download.  
5. Select Install Now or Install While Vehicle Off.  
u A notification appears on the screen if the update is successful.  
Continued  
305  
uuAudio System Basic OperationuSystem Updates  
1How to Update with a USB Device  
How to Update with a USB Device  
■
A FAT32-formatted USB device between 8GB and  
32GB in size with at least 8GB of free space is  
recommended.  
■
Download the update files from the server  
1. Press the button.  
2. Select System Updates.  
Be sure to delete any previous inventory or update  
files from the USB before starting the USB update  
process.  
u If System Updates is not displayed on the home screen, select  
3. Select Other Methods.  
4. Select Via USB.  
All Apps.  
u A notification appears on the screen.  
5. Connect a USB device into the USB port.  
u The inventory data is copied into the USB device.  
2 USB Port(s) P. 257  
6. Remove the USB device from the USB port.  
7. Connect the USB device into your computer, and then download the update files.  
u Follow the link to download the required software update files. Refer to  
https://usb.honda.com for instructions.  
■
Update the audio system  
1. Press the button.  
2. Select System Updates.  
3. Select Other Methods.  
4. Select Via USB.  
u A notification appears on the screen.  
5. Connect the USB device with the update files into the USB port.  
u A notification appears on the screen.  
2 USB Port(s) P. 257  
6. Select Install Now.  
u A notification appears on the screen if the update is successful.  
306  
uuAudio System Basic OperationuAdjusting the Sound  
Adjusting the Sound  
1. Press the  
button.  
1Adjusting the Sound  
2. Select an audio source icon.  
3. Select Sound.  
The Bose Dynamic Speed Compensation adjusts  
the volume level based on the vehicle speed. As you  
go faster, audio volume increases. As you slow down,  
audio volume decreases.  
Select an item from the following choices:  
• Bass / Treble: Treble, Midrange, Bass  
• Audio Zones & Balance / Fader: Driver  
Only, Front Only, Rear Only, Full Vehicle,  
Balance, Fader  
You can also adjust the sound by the following  
procedure.  
1. Press the  
button.  
2. Select General Settings.  
3. Select Sound.  
• Bose Centerpoint: Turns the Bose  
Centerpoint ON and OFF.  
Audio Zones & Balance / Fader  
You can change where the sound comes from by  
selecting one of the speaker options below:  
• Bose Dynamic Speed Compensation:  
Sets the amount of volume increase.  
•
•
Full Vehicle: All the speakers emit sound.  
Driver Only: Only the speaker by the driver's seat  
emits sound.  
•
•
Front Only: Only the front speakers emit sound.  
Rear Only: Only the rear speakers emit sound.  
To reset each setting for Bass / Treble, Audio Zones  
& Balance / Fader, and Bose Dynamic Speed  
Compensation, select Default on each setting  
screen.  
307  
uuAudio System Basic OperationuDisplay Setup  
Display Setup  
You can set the screen brightness.  
1Display Setup  
You can adjust the screen brightness by sliding or  
tapping on the brightness bar.  
Switching Display Mode Manually  
■
Select Display Mode.  
u The brightness bar is displayed for a few  
seconds.  
You can also change the screen brightness on the  
following procedures.  
1. Press the  
button.  
2. Select General Settings.  
3. Select Display.  
4. Select the setting you want.  
u Select  
or  
to adjust the brightness.  
u Select Display OFF to turn off the  
screen. To turn on the screen, press the  
or  
button.  
To reset the settings, select Default.  
308  
uuAudio System Basic OperationuDisplay Setup  
Selecting an Audio Source  
■
Select Audio Source  
Source Select Screen  
Source List Icons  
Select Audio Source on the header area, then select an icon on the source list to  
switch the audio source.  
Limitations for Manual Operation  
■
Certain manual functions are disabled or inoperable while the vehicle is in motion.  
You cannot select a grayed-out option until the vehicle is stopped.  
309  
uuAudio System Basic OperationuVoice Control Operation  
Voice Control Operation  
Your vehicle has a voice control system that allows hands-free operation.  
1Voice Control Operation  
The voice control system uses the (Talk) button on the steering wheel and a  
microphone near the map lights on the ceiling.  
When you press the  
button, a helpful prompt asks  
what you would like to do. Press and release the  
button again to bypass this prompt and give a  
command.  
1Voice Recognition  
Voice Recognition  
■
The voice control system can only be used from the  
driver's seat because the microphone unit removes  
noises from the front passenger's side.  
To achieve optimum voice recognition when using the voice control system:  
• Make sure the correct screen is displayed for the voice command that you are  
using.  
The system recognizes only certain commands.  
Available voice commands:  
2 Voice Portal Screen P. 311  
• Close the windows and moonroof.  
• Adjust the dashboard and side vents so air does not blow onto the microphone  
on the ceiling.  
• Speak clearly in a natural speaking voice without pausing between words.  
• Reduce any background noise if possible. The system may misinterpret your  
command if more than one person is speaking at the same time.  
310  
uuAudio System Basic OperationuVoice Control Operation  
You can change the mode on the General  
Settings screen.  
■
Phone Commands  
• Call <name>  
• Call <number>  
Voice Portal Screen  
■
2 Voice Control P. 401  
The system recognizes an only contact  
name in the stored phonebook of your  
phone. If full name is registered in first  
name field, the system will recognize the  
first name and last name as one contact  
name.  
The system only recognizes the commands  
on the following pages, at certain screens.  
Free form voice commands are not  
recognized.  
General Commands  
■
When the voice portal screen is displayed, it  
Phone commands are not available if using  
Apple CarPlay.  
When the  
(talk) button is pressed,  
will change to the top screen of each  
function by using the global commands.  
available voice commands appear on the  
screen.  
Audio Commands  
■
• Music Search  
• AM  
• FM  
For a complete list of commands, say “Help”  
after the beep.  
When the system recognizes the Audio  
command, the screen will change the  
dedicated screen for the voice recognition  
of the audio.  
• Sirius XM  
• Navigation  
• Phone  
Depending on the selected mode, the  
displayed commands are different on the  
voice portal screen. The commands  
recognized are the same regardless of  
which screen is selected.  
■
FM Commands  
• Tune to <FM frequency>  
Phone Commands  
■
Normal Mode: A list of example commands  
is displayed to quickly complete your  
desired function.  
This can only be used when the phone is  
connected. When the system recognizes the  
Phone command, the screen will change  
the dedicated screen for the voice  
recognition of the phone.  
■
AM Commands  
• Tune to <AM frequency>  
Assist Mode: A list of basic commands is  
displayed to guide you step by step through  
the voice menu.  
■
Sirius XM Commands  
• Tune to SXM <channel number>  
• Tune to SXM <station name>  
Continued  
311  
uuAudio System Basic OperationuVoice Control Operation  
■
iPod Commands  
Navigation Commands  
■
The screen changes to the navigation  
screen.  
• List Album <name>  
• List Artist <name>  
• List Genre <name>  
• List Playlist <name>  
• Play <artist> <album>  
• Play  
2 Refer to the Navigation System Manual  
Standard Commands  
■
• Voice Help  
• Play Album <name>  
• Play Artist <name>  
• Play Genre <name>  
• Play Music <text:media_combo>  
• Play Playlist <name>  
• Play Song <name>  
• Cancel  
• Back  
Voice Help are readout voice guidance for  
Help on current screen.  
List Commands  
■
■
USB Commands  
• Previous  
• Next  
• Yes  
• List Album <name>  
• List Artist <name>  
• List Playlist <name>  
• Play <artist> <album>  
• Play  
• No  
• Play Album <name>  
• Play Artist <name>  
• Play Music <text:media_combo>  
• Play Playlist <name>  
• Play Song <name>  
312  
uuAudio System Basic OperationuPlaying AM/FM Radio  
Playing AM/FM Radio  
Audio/Information Screen  
Settings Icon  
Select whether to tune to HD  
RadioTM automatically.  
(Back) Button  
Press to go back to the previous  
display.  
Preset Icons  
Tune the radio frequency for preset  
memory.  
VOL/  
AUDIO (Volume/Power) Knob  
Select and hold the preset icon to  
to  
Press to turn the audio system on and  
off.  
store that station. Select  
display beyond preset 5.  
>
Turn to adjust the volume.  
Scan Icon  
Select to scan each station with a strong signal.  
Seek Buttons  
Press  
or down for a station with a strong signal.  
or  
to search the selected band up  
Tune Icon  
Select to use the on-screen keyboard for entering  
the radio frequency directly.  
Continued  
313  
uuAudio System Basic OperationuPlaying AM/FM Radio  
1Preset Memory  
Preset Memory  
■
To store a station:  
The ST indicator appears on the display indicating  
stereo FM broadcasts.  
Stereo reproduction in AM is not available.  
1. Tune to the selected station.  
2. Select and hold the preset icon to store that station.  
u Selecting Press & Hold can be set a new preset station.  
Switching the Audio Mode  
Roll the left selector wheel or select Audio Source  
on the screen.  
Station List  
■
2 Audio Remote Controls P. 260  
Lists the strongest stations on the selected band.  
1. Select Station List to display a list.  
2. Select the station.  
You can store 12 AM/FM stations into preset  
memory.  
HD Radio Technology manufactured under license  
from iBiquity Digital Corporation. U.S. and Foreign  
Patents. For patents see http://dts.com/patents. HD  
Radio, Artist Experience, and the HD, HD Radio, and  
“ARC” logos are registered trademarks or  
■
Manual update  
Updates your available station list at any time.  
1. Select Station List to display a list.  
2. Select Refresh.  
trademarks of iBiquity Digital Corporation in the  
United States and/or other countries.  
314  
uuAudio System Basic OperationuPlaying AM/FM Radio  
Scan  
■
Samples each of the strongest stations on the selected band for 10 seconds. To turn  
off scan, select Stop or press the  
button.  
HD Subchannel  
■
Displays the subchannel list when an HD RadioTM station is selected while listening to  
an FM station.  
1. Select HD Radio Channels.  
2. Select the channel number.  
1Radio Data System (RDS)  
Radio Data System (RDS)  
■
Provides text data information related to your selected RDS-capable FM station.  
When you select an RDS-capable FM station, the RDS  
automatically turns on, and the frequency display  
changes to the station name. However, when the  
signals of that station become weak, the display  
changes from the station name to the frequency.  
■
To find an RDS station from Station List  
1. Select Station List to display a list while listening to an FM station.  
2. Select the station.  
■
Manual update  
Updates your available station list at any time.  
1. Select Station List to display a list while listening to an FM station.  
2. Select Refresh.  
Continued  
315  
uuAudio System Basic OperationuPlaying AM/FM Radio  
AM/FM Settings  
■
Change the AM/FM settings.  
1. Select Settings.  
2. Select an option.  
• HD Radio: Automatically choose a digital or an analog channel, or listen to  
analog only.  
• Artwork: Turns the artwork display on and off.  
316  
uuAudio System Basic OperationuPlaying SiriusXM® Radio  
Playing SiriusXM® Radio  
Album Art  
Audio/Information Screen  
Settings Icon  
Select settings to display and  
customize SiriusXM® settings.  
(Back) Button  
Press to go back to the previous  
display.  
Preset Icons  
Tune the radio frequency for preset  
memory.  
VOL/  
AUDIO (Volume/Power) Knob  
Select and hold the preset icon to store  
Press to turn the audio system on and  
off.  
that station. Select  
preset 5.  
>
to display beyond  
Turn to adjust the volume.  
Seek Buttons  
Category Icons  
Press  
or  
up or down for a station with a strong signal.  
to search the selected band  
Select  
or  
to display and select a SiriusXM® Radio category.  
Channel Icons  
Select  
or  
to the previous or next channel.  
Select and hold to rapidly skip 10 channels at a time.  
Continued  
317  
uuAudio System Basic OperationuPlaying SiriusXM® Radio  
1Playing SiriusXM® Radio  
To Change the Tune Mode  
■
1. Select Settings.  
In the channel mode, all available channels are  
selectable. In the category mode, you can select a  
channel within a category (Jazz, Rock, Classical, etc.).  
2. Select Tune Mode.  
3. Select Channel or Category.  
There may be instances when SiriusXM® Radio does  
not broadcast all the data fields (artist name, title).  
This does not indicate a problem with your audio  
system.  
SiriusXM® Radio stations load in ascending order,  
which can take about a minute. Once they have  
loaded you will be able to scroll up or down to make  
your selections.  
Switching the Audio Mode  
Roll the left selector wheel or select Audio Source  
on the screen.  
2 Audio Remote Controls P. 260  
Tune Start:  
When you change to a preset channel, a song being  
played on that channel restarts from the beginning  
with this function. This can be turned on or off by the  
following procedure.  
1. Select Settings.  
2. Select Tune Start.  
3. Select ON or OFF.  
To change a category, select Category icons, or  
select More and then select Category List.  
318  
uuAudio System Basic OperationuPlaying SiriusXM® Radio  
1Playing SiriusXM® Radio  
Preset Memory  
■
To store a channel:  
You can store 12 SiriusXM® channels into the preset  
memory.  
1. Tune to the selected channel.  
2. Select and hold the preset icon to store that channel.  
u Selecting Press & Hold can be set a new preset channel.  
1Multi-channel preset (for music channels only)  
■
Multi-channel preset (for music channels only)  
You can store up to 10 of your preferred music channels per preset.  
TuneMix:  
The multi-channel preset function can be turned on  
or off by the following procedure.  
1. Select Settings.  
1. Tune a station.  
2. Select and hold the preset number you  
want to add a music channel.  
3. Select Add to TuneMix or Create  
TuneMix.  
2. Select TuneMix.  
3. Select ON or OFF.  
u A message appears if there are no  
available presets.  
When you want to replace the channel, select  
Replace Preset.  
If you want to delete a channel, select Edit TuneMix,  
and then select the channel you want to delete.  
Continued  
319  
uuAudio System Basic OperationuPlaying SiriusXM® Radio  
1Listening to Featured Channels  
Listening to Featured Channels  
■
Up to 10 featured channels by SiriusXM® can be  
displayed.  
Suggested channel listing received from SiriusXM® can be displayed and selected.  
1. Select More.  
2. Select Category List.  
3. Select Featured Favorites.  
To switch the sorting method, select Number or  
Name on the upper right of the screen.  
4. Select the featured favorite list title you want to listen to.  
u The selected channel list of the title is displayed.  
5. Select the channel.  
Select Keypad to use the on-screen keyboard for  
entering the channel number directly.  
320  
uuAudio System Basic OperationuPlaying SiriusXM® Radio  
1Replay Function  
Replay Function  
■
The system starts storing broadcast in memory when  
the power mode is turned ON. You can go back to  
the program from that point.  
The system can record up to the last 60 minutes of your currently tuned channel's  
broadcast, as well as the last 30 minutes of your preset channel's broadcast, starting  
from the moment you turn the vehicle on. If you tuned to a preset channel, the  
system records up to 60 minutes of a broadcast instead of up to 30 minutes. You  
can rewind and replay the last 30 or 60 minutes of a broadcast.  
You can no longer replay any program once the  
power mode is turned off as it erases memory.  
You can check how long the program has been  
stored in memory from the audio/information screen.  
Move the position you want to replay by selecting  
or  
.
After 30 or 60 minutes of recording the system will  
automatically start deleting the oldest data.  
To play or pause on playback mode, select the play/pause icon.  
Audio/Information Screen  
(A)  
■
Returning to real-time broadcast  
Select and hold .  
(B)  
(C) (D)  
(A): Shows how much time the replayed segment is  
behind the real-time broadcast  
(B): Replayed segment  
(C): Length stored in memory  
(D): Play/Pause icon  
When you listen a multi-channel preset while at the  
playback mode, the replayed segment is not  
displayed.  
Continued  
321  
uuAudio System Basic OperationuPlaying SiriusXM® Radio  
1Live Sports Alert  
Live Sports Alert  
■
While listening to other channels, you can receive sports alerts such as scores from  
the games of your favorite teams.  
The Pop-up appears and notifies you of a sports alert  
function.  
■
To set up a favorite team  
1. Select Settings.  
2. Select Sports Notifications Setup.  
3. Select Favorite Teams.  
4. Select + Add Favorite Team.  
5. Select a team.  
■
To set up an alert message  
1. Select Settings.  
2. Select Sports Notifications Setup.  
3. Select Notifications.  
4. Select Game Notifications or SportsFlash Game Play Notifications.  
5. Select Notifications.  
6. Select ON.  
7. Select a favorite team.  
■
Receiving a sports alert  
1. A pop-up appears and notifies you of a sports alert.  
2. Select Listen.  
u You can use the same items as the playback mode pop-up screen.  
2 Replay Function P. 321  
To go back to the previous screen, select  
.
322  
uuAudio System Basic OperationuPlaying SiriusXM® Radio  
1Traffic and Weather Information  
Traffic and Weather Information  
■
You can receive traffic and weather information.  
When traffic and weather information is received, a  
notification is displayed in the header area.  
2 Status Area P. 301  
■
To set up a traffic & weather information  
1. Select Settings.  
Traffic & Weather Now are registered trademarks of  
SiriusXM® Radio, Inc.  
2. Select Traffic & Weather Now Setup.  
3. Select Selected City.  
4. Select the region.  
u When you do not want to receive the information, select No Market  
Selected.  
■
Listening a traffic and weather information  
1. Select the status icon.  
2. Select the traffic and weather information.  
u Play mode can also use the any items same as playback mode.  
2 Replay Function P. 321  
To go back to the previous screen, select  
.
Continued  
323  
uuAudio System Basic OperationuPlaying SiriusXM® Radio  
1Channel Schedule  
Channel Schedule  
■
You can view a channel schedule or receive an alert when your favorite program is  
about to start.  
Select Keypad to use the on-screen keyboard for  
entering the channel number directly.  
■
To view a channel schedule  
1. Select More.  
2. Select Channel Schedule.  
1To set up an alert message  
■
To set up an alert message  
1. Select More.  
The Pop-up appears and notifies you of an alert  
function.  
2. Select Channel Schedule.  
3. Select a program.  
Selecting Just Once disables the alert feature next  
time you turn the power mode to ON.  
4. Select Set Program Alert.  
5. Select Just Once or Every Time.  
If you want to delete the alert, select Remove Alert.  
To enable an alert message, change settings for the  
alert function.  
2 To enable the alert function P. 325  
324  
uuAudio System Basic OperationuPlaying SiriusXM® Radio  
Manage Program Alert  
■
You can change settings for the alert function.  
■
To enable the alert function  
1. Select Settings.  
2. Select Manage Program Alerts.  
3. Select Notifications.  
4. Select ON or OFF.  
■
To remove an alert  
1. Select Settings.  
2. Select Manage Program Alerts.  
3. Select Alerts Set.  
4. Select  
on the alert you want to delete.  
Continued  
325  
uuAudio System Basic OperationuPlaying SiriusXM® Radio  
1Scan  
The “Scan Songs in Presets” function is based on  
TuneScanTM technology of SiriusXM®.  
Scan  
■
Sample each channel on the selected mode for 10 seconds.  
1. Select More.  
2. Select Scan.  
The “Featured Channels” function is based on  
Featured FavoritesTM technology of SiriusXM®.  
You can change a scan mode by the following procedure.  
1. Select Settings.  
2. Select Scan Mode.  
TuneScanTM and Featured FavoritesTM are registered  
trademarks of SiriusXM® Radio, Inc.  
3. Select Channel or Preset.  
To turn off scan, select Stop.  
326  
uuAudio System Basic OperationuPlaying SiriusXM® Radio  
SiriusXM® Settings  
■
Change the SiriusXM® settings.  
1. Select Settings.  
2. Select an option.  
• TuneMix: Turns multiple channel mix preset on and off.  
• Tune Mode: Choose whether to group by category or channel number when  
changing channels.  
2 To Change the Tune Mode P. 318  
• Scan Mode: Select the scan mode from all channels or presets.  
2 Scan P. 326  
• Tune Start: Start the currently playing song at the beginning when you switch to  
a music channel preset.  
2 Tune Start: P. 318  
• Sports Notifications Setup: Set to receive sports alerts such as scores from your  
favorite teams.  
2 Live Sports Alert P. 322  
• Traffic & Weather Now Setup: Set to receive traffic and weather information.  
2 Traffic and Weather Information P. 323  
• Manage Program Alerts: Change settings for the alert function.  
2 Manage Program Alert P. 325  
327  
uuAudio System Basic OperationuPlaying an iPod  
Playing an iPod  
Using your USB connector, connect the iPod to the USB port, then select the USB  
mode.  
2 USB Port(s) P. 257  
Cover Art  
Audio/Information Screen  
(Back) Button  
Press to go back to the previous display.  
Shuffle Icon  
Select to play all files in the current  
category in random order.  
VOL/  
AUDIO (Volume/Power) Knob  
Press to turn the audio system on and off.  
Turn to adjust the volume.  
Repeat Icon  
Select to repeat the current file.  
Track Buttons  
Press  
or  
to change songs.  
Play/Pause Icon  
Press and hold to move rapidly within a song.  
Track Icons  
Select  
Select and hold to move rapidly within a song.  
Browse Icon  
or  
to change songs.  
Select to display the menu items.  
328  
uuAudio System Basic OperationuPlaying an iPod  
1Playing an iPod  
How to Select a Song from the Music Search List  
■
Available operating functions vary on models or  
versions. Some functions may not be available on the  
vehicle's audio system.  
1. Select Browse.  
2. Select a search category (e.g., Artists,  
Albums, etc.).  
If there is a problem, you may see an error message  
on the audio/information screen.  
3. Continue making selections until you find  
the song of your choice.  
2 iPod/USB Flash Drive P. 359  
If you operate the music app on your iPhone/iPod  
while the phone is connected to the audio system,  
you may no longer be able to operate the same app  
on the audio/information screen.  
Reconnect the device if necessary.  
If an iPhone or a smartphone is connected via Apple  
CarPlay or Android Auto, the iPod/USB source will be  
unavailable and audio files on the phone will be  
playable only within Apple CarPlay or Android Auto.  
Continued  
329  
uuAudio System Basic OperationuPlaying an iPod  
1How to Select a Play Mode  
How to Select a Play Mode  
■
You can select shuffle and repeat modes when playing a file.  
Play Mode Menu Items  
Shuffle  
■
Shuffle/Repeat  
Shuffle off: Shuffle mode to off.  
Shuffle All Songs: Plays all available songs in  
a selected list (playlists, artists, albums, songs, genres,  
or composers) in random order.  
Select shuffle or repeat icon repeatedly until a  
desired mode.  
Repeat  
Repeat off: Repeat mode to off.  
Repeat Song: Repeats the current song.  
Repeat all: Repeats the all songs.  
Repeat Icon  
Shuffle Icon  
■
To turn off a play mode  
Select the mode you want to turn off.  
330  
uuAudio System Basic OperationuPlaying a USB Flash Drive  
Playing a USB Flash Drive  
Your audio system reads and plays sound files on a USB flash drive in either MP3,  
WMA, AAC*1, FLAC, or WAV format.  
Connect your USB flash drive to the USB port, then select the USB mode.  
2 USB Port(s) P. 257  
Audio/Information Screen  
(Back) Button  
Press to go back to the previous display.  
Random Icon  
VOL/  
AUDIO (Volume/Power) Knob  
Select to play all files in the current  
category in random order.  
Press to turn the audio system on and off.  
Turn to adjust the volume.  
Repeat Icon  
Track Buttons  
Select to repeat the current file.  
Press  
or  
to change files.  
Press and hold to move rapidly within a track.  
Play/Pause Icon  
Browse Icon  
Track Icons  
Select  
Select and hold to move rapidly within a track.  
Select to display the menu items.  
or  
to change files.  
*1:Only AAC format files recorded with iTunes are playable on this unit.  
Continued  
331  
uuAudio System Basic OperationuPlaying a USB Flash Drive  
1Playing a USB Flash Drive  
How to Select a File from the Music Search List  
■
Use the recommended USB flash drives.  
2 General Information on the Audio System  
P. 361  
1. Select Browse.  
2. Select a search category (e.g., Artists,  
Albums, etc.).  
3. Continue making selections until you find  
the song of your choice.  
WMA files protected by digital rights management  
(DRM) cannot be played.  
The audio system displays Unplayable File, then  
skips to the next file.  
If there is a problem, you may see an error message  
on the audio/information screen.  
2 iPod/USB Flash Drive P. 359  
332  
uuAudio System Basic OperationuPlaying a USB Flash Drive  
1How to Select a Play Mode  
How to Select a Play Mode  
■
You can select repeat, and random modes when playing a file.  
Play Mode Menu Items  
Random  
■
Random/Repeat  
Random off: Random mode to off.  
Random All Tracks: Plays all files in random  
order.  
Select random or repeat icon repeatedly until  
a desired mode.  
Random in Folder: Plays all files in the current  
folder in random order.  
Repeat  
Repeat off: Repeat mode to off.  
Repeat track: Repeats the current file.  
Repeat folder: Repeats all files in the current  
folder.  
Repeat Icon  
Random Icon  
■
To turn off a play mode  
Select the mode you want to turn off.  
333  
uuAudio System Basic OperationuPlaying Bluetooth® Audio  
Playing Bluetooth® Audio  
Your audio system allows you to listen to music from your Bluetooth-compatible  
phone.  
1Playing Bluetooth® Audio  
Not all Bluetooth-enabled phones with streaming  
audio capabilities are compatible with the system.  
For a list of compatible phones:  
This function is available when the phone is paired and connected to the vehicle's  
Bluetooth® HandsFreeLink® (HFL) system.  
•
U.S.: Visit automobiles.honda.com/handsfreelink/,  
or call 1-888-528-7876.  
2 Phone Setup P. 468  
•
Canada: For more information on smartphone  
compatibility, call 1-855-490-7351.  
Audio/Information Screen  
(Back) Button  
It may be illegal to perform some data device  
functions while driving.  
Bluetooth Indicator  
Press to go back  
to the previous  
display.  
Appears when your phone  
is connected to HFL.  
Only one phone can be used with HFL at a time.  
When there are more than two paired phones in the  
vehicle, the system automatically connects to the  
prioritized phone. You can assign priority to a phone  
in the Bluetooth® device list.  
Shuffle Icon  
Select to play all files  
in the current  
2 Phone Setup P. 468  
category in random  
order.  
The connected phone for Bluetooth® Audio can be  
different.  
If more than one phone is paired to the HFL system,  
there may be a delay before the system begins to play.  
Repeat Icon  
VOL/ AUDIO  
(Volume/Power) Knob  
Select to repeat the  
current track.  
In some cases, the name of the artist, album, or track  
may not appear correctly.  
Press to turn the audio  
system on and off.  
Play/Pause Icon  
Turn to adjust the  
volume.  
Some functions may not be available on some devices.  
Track Icons  
Select  
or  
to change tracks.  
If a phone is currently connected via Apple CarPlay or  
Android Auto, Bluetooth® Audio from that phone is  
unavailable. However, a second previously paired  
phone can stream Bluetooth® Audio by selecting  
from the Bluetooth® device list.  
Browse Icon  
Select and hold to move rapidly  
within a track.  
Select to display the menu items.  
2 Phone Setup P. 468  
334  
uuAudio System Basic OperationuPlaying Bluetooth® Audio  
1To Play Bluetooth® Audio Files  
To Play Bluetooth® Audio Files  
■
To play the audio files, you may need to operate your  
phone. If so, follow the phone maker's operating  
instructions.  
1. Make sure that your phone is paired and  
connected to the system.  
2 Phone Setup P. 468  
Switching to another mode pauses the music playing  
from your phone.  
2. Select the Bluetooth® Audio mode.  
If the phone is not recognized, another HFL-  
compatible phone, which is not compatible  
for Bluetooth® Audio, may already be  
connected.  
You can change the connected phone by selecting  
Change Device.  
2 Phone Setup P. 468  
■
To play or pause a file  
Select the play/pause icon.  
1Searching for Music  
Searching for Music  
■
Depending on the Bluetooth® device you connect,  
some or all of the lists may not be displayed.  
1. Select Browse.  
2. Select a search category (e.g., Albums).  
3. Select an item.  
u The selection begins playing.  
Continued  
335  
uuAudio System Basic OperationuPlaying Bluetooth® Audio  
1How to Select a Play Mode  
How to Select a Play Mode  
■
You can select shuffle and repeat modes when playing a file.  
Play Mode Menu Items  
Shuffle  
■
Shuffle/Repeat  
Shuffle off: Shuffle mode to off.  
Shuffle All Songs: Plays all available songs in  
a selected list in random order.  
Select shuffle or repeat icon repeatedly until a  
desired mode.  
Repeat  
Repeat off: Repeat mode to off.  
Repeat Song: Repeats the current song.  
Repeat Group: Repeats the current group.  
Repeat all: Repeats the all songs.  
Repeat Icon  
Shuffle Icon  
Depending on the Bluetooth® device you connect,  
some or all of the functions may not be displayed.  
■
To turn off a play mode  
Select the mode you want to turn off.  
336  
uuAudio System Basic OperationuHondaLink®  
HondaLink®  
HondaLink® connects you to the latest information from Honda. You can connect  
your phone wirelessly through Wi-Fi or Bluetooth®.  
2 Wi-Fi Connection P. 344  
1HondaLink®  
The HondaLink® connect app is compatible with most  
iPhone and Android phones.  
2 Phone Setup P. 468  
Some cell phone carriers charge for tethering and  
smartphone data use. Check your phone's data  
subscription package.  
HondaLink® Menu  
■
If there is an active connection to Apple CarPlay or  
Android Auto, HondaLink® can only be connected  
through Wi-Fi.  
■
Connect  
Displays the connection status of the vehicle.  
■
Help & Support  
Displays tips for vehicle usage, and get support via road side or customer service  
center.  
■
Message  
Displays helpful and important information from Honda.  
Continued  
337  
uuAudio System Basic OperationuHondaLink®  
To Set Up to Connect HondaLink® Service  
■
Use the following procedure to connect to HondaLink® service.  
■
To enable the HondaLink® service  
1. Press the  
button.  
2. Select General Settings.  
3. Select System.  
4. Select Data Sharing Setting.  
5. Select ON.  
■
To link with HondaLink®  
You can see the connection guide screen after  
launching HondaLink® when there is no  
connection to a network. If you do not need  
this guide, select check-box and select OK.  
338  
uuAudio System Basic OperationuHondaLink®  
Vehicle Information and Message from Honda Tips  
■
You can check the messages that are received quickly in the shortcut operation.  
1. A notification appears and notifies you of a  
new message on the header area.  
Notification  
2. A notification icon is continuously displayed  
in the header area until the new message is  
read.  
Continued  
339  
uuAudio System Basic OperationuHondaLink®  
3. Select the system status icon to see the  
messages.  
4. Select a new message to open.  
340  
uuAudio System Basic OperationuSmart Shortcuts  
Smart Shortcuts  
By observing and learning driver behaviors, patterns, and preferences, the system  
anticipates driver actions and presents on-screen suggestions to help perform  
desired actions quicker and with fewer steps.  
1Smart Shortcuts  
The app also supports different profiles for each user,  
with customized learning for each profile. The app  
will also learn to associate a profile to a user over time  
based on key fob and connected phone data.  
• The app will suggest actions based on what it learns you do often, and  
occasionally make recommendations based on your learned preferences.  
• The system will take some time to learn. The more you interact with the system,  
the more suggestion you will see, and the more accurate they will become.  
• Suggestions will automatically refresh periodically to provide updated content for  
each profile.  
• You can also provide feedback on whether a suggestion is helpful by pressing and  
holding on it. This can help the app grow smarter over time.  
Smart Shortcuts Screen  
Shortcut Suggestion  
• To change the notifications behavior for Smart Shortcuts:  
1. Select Options on the Smart Shortcuts screen.  
2. Select Suggestion Settings.  
3. Select an option.  
• All data used for Smart Shortcuts can be erased by a Factory Data Reset.  
2 Defaulting All the Settings P. 413  
Continued  
341  
uuAudio System Basic OperationuSmart Shortcuts  
1How to Use  
How to Use  
■
You can change the profile by selecting  
top of the Smart Shortcuts screen.  
on the  
1. Press the  
button.  
2. Select Smart Shortcuts.  
3. Select a shortcut to take the action  
suggested.  
You can customize the following items by selecting  
Options on the top of the Smart Shortcuts screen.  
•
•
Profiles: Create, change, and manage profiles.  
View App Walkthrough: View the Smart  
Shortcuts walkthrough.  
•
Suggestion Settings: Change where suggestions  
can appear.  
To create a profile:  
• Call Suggestions: When selected, a call to the contact or number suggested will  
be placed and shown. Based on your calling patterns, contacts will be suggested  
for you to call.  
1. Select Options on the Smart Shortcuts screen.  
2. Select Profiles.  
3. Select Manage Profiles.  
4. Select + Add New Profile.  
5. Enter name for your profile.  
6. Select Done.  
u Connect your smartphone through Bluetooth® to get contact suggestions.  
u Call suggestions will not be displayed when you are connected to Apple  
Carplay.  
uA new profile has been created and the Smart App  
will automatically switch to that profile.  
• Navigation Suggestions: When selected, a route will be started to the  
suggested destination and the embedded navigation app will open.  
u When a long route is set in your navigation system, you can receive  
recommendations for gas stations and places to stop at along the way.  
u The places you frequently navigate to while using the embedded navigation  
system will be suggested as shortcuts.  
To change a profile:  
1. Select Options on the Smart Shortcuts screen.  
2. Select Profiles.  
3. Select Change Current Profile.  
4. Select a profile from the list.  
u Save your home location in the embedded navigation app to have a shortcut  
suggestion for it when you're away from home.  
uThe change to the selected profile has been made.  
342  
uuAudio System Basic OperationuSmart Shortcuts  
• Radio Suggestions: When selected, the corresponding radio app (FM, AM, or  
SiriusXM®) will open and it will start playing the station.  
u From radio apps you can receive:  
- FM, AM, SiriusXM®: Most frequently listened stations you may like to play  
next.  
- FM, SiriusXM®: Genre-based suggestions.  
u Considerations:  
- FM suggestions will appear only when they are within range, according to  
your vehicle's tuner signal.  
- SiriusXM® suggestions will be available as long as there is an active account in  
the vehicle.  
343  
uuAudio System Basic OperationuWi-Fi Connection  
Wi-Fi Connection  
This vehicle is equipped with Wi-Fi connectivity. You can connect to an external  
Wi-Fi hotspot or communication device.  
1Wi-Fi Connection  
Wi-Fi and Wi-Fi Direct are registered trademarks of  
Wi-Fi Alliance®.  
1Connect the vehicle to a Wi-Fi hotspot  
Connect the vehicle to a Wi-Fi hotspot  
■
You cannot go through the setting procedure while  
the vehicle is moving. Park in a safe place to set the  
audio system in Wi-Fi mode.  
1. Press the  
button.  
2. Select General Settings.  
3. Select Connections.  
4. Select Wi-Fi.  
Some cell phone carriers charge for tethering and  
smartphone data use. Check your phone's data  
subscription package.  
5. Select OK.  
6. Select Change Mode.  
7. Select Network.  
Check your phone manual to find out if the phone  
has Wi-Fi connectivity.  
u If the data sharing settings is to OFF, the  
message will be displayed on the screen.  
You need to change to ON.  
2 Customized Features P. 390  
You can confirm whether Wi-Fi connection is on or  
off with the  
icon on the system status area.  
Transmission speed and others will not be displayed  
on this screen.  
u If you want to turn off the Wi-Fi mode,  
select OFF.  
344  
uuAudio System Basic OperationuWi-Fi Connection  
8. Select the access point you want to connect  
to the system.  
u To add a new network or select the  
saved networks, select Options.  
u If Options is selected, Add Network  
and Saved Networks can be registered.  
345  
uuAudio System Basic OperationuApple CarPlay  
Apple CarPlay  
If you connect an Apple CarPlay-compatible iPhone to the system via the USB port  
or wirelessly, you can use the audio/information screen, instead of the iPhone  
display, to make a phone call, listen to music, view maps (navigation), and access  
messages.  
1Apple CarPlay  
We recommend that you update iOS to the latest  
version when using Apple CarPlay.  
We recommend using the latest OS.  
2 USB Port(s) P. 257  
Park in a safe place before connecting your iPhone to  
Apple CarPlay and when launching any compatible  
apps.  
Apple CarPlay Menu  
■
Home screen  
Apple CarPlay menu screen  
To directly access the Apple CarPlay phone function,  
select Phone on the home screen. While connected  
to Apple CarPlay, calls are only made through Apple  
CarPlay. If you want to make a call with  
HandsFreeLink, turn Apple CarPlay OFF.  
2 Setting Up Apple CarPlay P. 348  
When your iPhone is connected to Apple CarPlay, it is  
not possible to use the Bluetooth® Audio or  
Bluetooth® HandsFreeLink®. However, other  
previously paired phones can stream audio via  
Bluetooth® while Apple CarPlay is connected.  
2 Phone Setup P. 468  
Apple CarPlay icon  
Go back to the home screen  
: Go back to the Apple  
CarPlay Dashboard screen  
: Go back to the Apple  
CarPlay menu screen  
Apple CarPlay and Android Auto cannot run at the  
same time.  
For details on countries and regions where Apple  
CarPlay is available, as well as information pertaining  
to function, refer to the Apple homepage.  
346  
uuAudio System Basic OperationuApple CarPlay  
■
Phone  
Access the contact list, make phone calls, or listen to voice mail.  
1Apple CarPlay  
Apple CarPlay Operating Requirements &  
Limitations  
Apple CarPlay requires a compatible iPhone with an  
active cellular connection and data plan. Your  
carrier's rate plans will apply.  
■
Messages  
Check and reply to text messages, or have messages read to you.  
■
Music  
Play music stored on your iPhone.  
Changes in operating systems, hardware, software,  
and other technology integral to providing Apple  
CarPlay functionality, as well as new or revised  
governmental regulations, may result in a decrease or  
cessation of Apple CarPlay functionality and services.  
Honda cannot and does not provide any warranty or  
guarantee of future Apple CarPlay performance or  
functionality.  
■
Maps  
Display Apple Maps and use the navigation function just as you would on your  
iPhone.  
Only one navigation system (pre-installed navigation or Apple CarPlay) can give  
directions at a time. When you are using one system, directions to any prior  
destination set on the other system will be canceled, and the system you are  
currently using will direct you to your destination.  
It is possible to use 3rd party apps if they are  
compatible with Apple CarPlay. Refer to the Apple  
homepage for information on compatible apps.  
Continued  
347  
uuAudio System Basic OperationuApple CarPlay  
1Setting Up Apple CarPlay  
Setting Up Apple CarPlay  
■
Only initialize Apple CarPlay when you are safely  
parked.  
After you have connected your iPhone to the system via the USB port or wirelessly,  
use the following procedure to set up Apple CarPlay. Use of Apple CarPlay will result  
in the transmission of certain user and vehicle information (such as vehicle location,  
speed, and status) to your iPhone to enhance the Apple CarPlay experience. You will  
need to consent to the sharing of this information on the audio/information screen.  
When Apple CarPlay first detects your iPhone, you  
will need to set up your iPhone. Refer to the  
instruction manual that came with your iPhone.  
You can use the following procedure to disconnect or  
delete the devices connecting Apple CarPlay:  
Connecting Apple CarPlay Using the USB Cable to the USB Port  
■
1. Connect the iPhone to the USB port using the USB cable.  
Press the  
buttonSelect General Settings  
Smartphone ConnectionApple CarPlay  
Select device  
2 USB Port(s) P. 257  
u The confirmation screen will be displayed.  
2. Select Yes.  
Use of user and vehicle information  
The use and handling of user and vehicle information  
transmitted to/from your iPhone by Apple CarPlay is  
governed by the Apple iOS terms and conditions and  
Apple's Privacy Policy.  
u If you do not want to connect Apple CarPlay, select No.  
You may change the consent settings under the Smartphone Connection settings  
menu.  
348  
uuAudio System Basic OperationuApple CarPlay  
Connect Apple CarPlay Wirelessly  
■
■
Connect Apple CarPlay wirelessly on the home screen  
1. Press the  
button.  
2. Select Smartphone Connection.  
3. Select + Connect New Device.  
4. Pair the iPhone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.  
2 Phone Setup P. 468  
5. Select Yes.  
u If your iPhone asks to accept for connecting Apple CarPlay, accept for  
connection. A confirmation message for HondaLink Assist appears.  
6. Select Yes or No.  
■
Connect Apple CarPlay wirelessly on the Apple CarPlay device list  
1. Press the button.  
2. Select General Settings.  
3. Select Smartphone Connection.  
4. Select Apple CarPlay.  
5. Select + Connect New Device.  
6. Pair the iPhone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.  
2 Phone Setup P. 468  
7. Select Yes.  
u If your iPhone asks to accept for connecting Apple CarPlay, accept for  
connection. A confirmation message for HondaLink Assist appears.  
8. Select Yes or No.  
Continued  
349  
uuAudio System Basic OperationuApple CarPlay  
■
Connect Apple CarPlay wirelessly on the Bluetooth® device list  
1. Press the button.  
2. Select General Settings.  
3. Select Connections.  
4. Select Bluetooth.  
5. Select + Connect New Device.  
6. Pair the iPhone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.  
2 Phone Setup P. 468  
7. Check the box on Apple CarPlay.  
u If you select Apple CarPlay, you cannot select Audio and Phone.  
8. Select Connect.  
9. Select Yes.  
u If your iPhone asks to accept for connecting Apple CarPlay, accept for  
connection. A confirmation message for HondaLink Assist appears.  
10. Select Yes or No.  
■
Connect Apple CarPlay wirelessly with the steering wheel  
1. Press and hold the (talk) button on the steering wheel.  
2. Pair the iPhone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.  
2 Phone Setup P. 468  
3. Check the box on Apple CarPlay.  
u If you select Apple CarPlay, you cannot select Audio and Phone.  
4. Select Connect.  
5. Select Yes.  
u If your iPhone asks to accept for connecting Apple CarPlay, accept for  
connection. A confirmation message for HondaLink Assist appears.  
6. Select Yes or No.  
350  
uuAudio System Basic OperationuApple CarPlay  
■
Connect Apple CarPlay wirelessly at start-up (when there is no phone  
paired to the system)  
1. Set the power mode to ACCESSORY or ON.  
2. Select OK.  
u If there is no registered device, the Bluetooth® pairing screen will be displayed.  
u If you check the box with Do not show this again, this screen will not be  
displayed.  
3. Pair the iPhone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.  
2 Phone Setup P. 468  
4. Check the box on Apple CarPlay.  
u If you select Apple CarPlay, you cannot select Audio and Phone.  
5. Select Connect.  
6. Select Yes.  
u If your iPhone asks to accept for connecting Apple CarPlay, accept for  
connection. A confirmation message for HondaLink Assist appears.  
7. Select Yes or No.  
Continued  
351  
uuAudio System Basic OperationuApple CarPlay  
1Operating Apple CarPlay with Siri  
Operating Apple CarPlay with Siri  
■
Press and hold the talk button to activate Siri.  
Below are examples of questions and commands for  
Siri.  
•
•
•
•
•
•
What movies are playing today?  
Call dad at work.  
What song is this?  
How's the weather tomorrow?  
Read my latest email.  
Find a table for four tonight in Chicago.  
For more information, please visit  
www.apple.com/ios/siri.  
(Talk) Button:  
Press and hold to activate Siri.  
Press again to deactivate Siri.  
Press and release to activate  
standard voice recognition  
system.  
352  
uuAudio System Basic OperationuAndroid AutoTM  
Android AutoTM  
1Android AutoTM  
When you connect an Android phone to the audio system via the USB port or  
wirelessly, Android Auto is automatically initiated. When connected via Android  
Auto, you can use the audio/information screen to access the Phone, Google Maps  
(Navigation), and Google Now functions. When you first use Android Auto, a  
tutorial will appear on the screen.  
We recommend that you update Android OS to the  
latest version when using Android Auto.  
Bluetooth A2DP cannot be used while your phone is  
connected to Android Auto.  
We recommend that you complete this tutorial while safely parked before using  
Android Auto.  
To use Android Auto on a smartphone with Android  
9.0 (Pie) or earlier, you need to download the  
Android Auto app from Google Play to your  
smartphone.  
2 USB Port(s) P. 257  
2 Auto Pairing Connection P. 354  
Park in a safe place before connecting your Android  
phone to Android Auto and when launching any  
compatible apps.  
Android Auto Menu  
■
Home screen  
Android Auto menu screen  
When your Android phone is connected to Android  
Auto, it is not possible to use the Bluetooth® Audio.  
However, other previously paired phones can stream  
audio via Bluetooth® while Android Auto is  
connected.  
2 Phone Setup P. 468  
Apple CarPlay and Android Auto cannot run at the  
same time.  
Android Auto icon  
Go back to the home screen  
Go back to the Android  
Auto menu screen  
Android Auto is a trademark of Google LLC.  
Continued  
353  
uuAudio System Basic OperationuAndroid AutoTM  
1Android AutoTM  
• Maps  
Display Google Maps and use the navigation function just as you would with your  
Android phone. When the vehicle is in motion, it is not possible to make keyboard  
For details on countries and regions where Android  
Auto is available, as well as information pertaining to  
function, refer to the Android Auto homepage.  
entries. Stop the vehicle in a safe location to undertake a search or provide other  
inputs.  
Screens may differ depending on the version of the  
Android Auto app you are using.  
• Phone  
Make and receive phone calls as well as listen to voicemail.  
• Honda  
•
Android Auto Operating Requirements &  
Limitations  
Operate Android Auto with your voice.  
Android Auto requires a compatible Android phone  
with an active mobile connection and data plan. Your  
carrier's rate plans will apply.  
•
You can check Android notifications.  
(Android Auto Home)  
•
Changes in operating systems, hardware, software,  
and other technology integral to providing Android  
Auto functionality, as well as new or revised  
governmental regulations, may result in a decrease or  
cessation of Android Auto functionality and services.  
Honda cannot and does not provide any warranty or  
guarantee of future Android Auto performance or  
functionality.  
Display useful information organized by Android Auto into simple cards that  
appear just when they're needed.  
Auto Pairing Connection  
■
When you connect an Android phone to the unit via the USB port or wirelessly,  
Android Auto is automatically initiated.  
It is possible to use 3rd party apps if they are  
compatible with Android Auto. Refer to the Android  
Auto homepage for information on compatible apps.  
354  
uuAudio System Basic OperationuAndroid AutoTM  
1Connecting Android Auto Using the USB Cable to the USB Port  
Connecting Android Auto Using the USB Cable to the USB Port  
■
1. Connect the Android phone to the USB port using the USB cable.  
Only initialize Android Auto when you are safely  
parked. When Android Auto first detects your phone,  
you will need to set up your phone so that auto  
pairing is possible. Refer to the instruction manual  
that came with your phone.  
2 USB Port(s) P. 257  
u The confirmation screen will be displayed.  
2. Select Yes.  
u If you do not want to connect Android Auto, select No.  
You can use the following procedure to disconnect or  
delete the devices connecting Android Auto after you  
have completed the initial setup:  
You may change the consent settings under the Smartphone Connection settings  
menu.  
Select General Settings   
Smartphone Connection Android Auto   
Select device  
Use of user and vehicle information  
The use and handling of user and vehicle information  
transmitted to/from your phone by Android Auto is  
governed by the Google's Privacy Policy.  
Connect Android Auto Wirelessly  
■
■
Connect Android Auto wirelessly on the home screen  
1. Press the button.  
2. Select Smartphone Connection.  
3. Select + Connect New Device.  
4. Pair the Android phone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.  
2 Phone Setup P. 468  
5. Select Yes.  
u If your Android phone asks to accept for connecting Android Auto, accept for  
connection. A confirmation message for HondaLink Assist appears.  
6. Select Yes or No.  
Continued  
355  
uuAudio System Basic OperationuAndroid AutoTM  
■
Connect Android Auto wirelessly on the Android Auto device list  
1. Press the button.  
2. Select General Settings.  
3. Select Smartphone Connection.  
4. Select Android Auto.  
5. Select + Connect New Device.  
6. Pair the Android phone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.  
2 Phone Setup P. 468  
7. Select Yes.  
u If your Android phone asks to accept for connecting Android Auto, accept for  
connection. A confirmation message for HondaLink Assist appears.  
8. Select Yes or No.  
■
Connect Android Auto wirelessly on the Bluetooth® device list  
1. Press the button.  
2. Select General Settings.  
3. Select Connections.  
4. Select Bluetooth.  
5. Select + Connect New Device.  
6. Pair the Android phone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.  
2 Phone Setup P. 468  
7. Check the box on Android Auto.  
u If you select Android Auto, you cannot select Audio and Phone.  
8. Select Connect.  
9. Select Yes.  
u If your Android phone asks to accept for connecting Android Auto, accept for  
connection. A confirmation message for HondaLink Assist appears.  
10. Select Yes or No.  
356  
uuAudio System Basic OperationuAndroid AutoTM  
■
Connect Android Auto wirelessly with the steering wheel  
1. Press and hold the (talk) button on the steering wheel.  
2. Pair the Android phone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.  
2 Phone Setup P. 468  
3. Check the box on Android Auto.  
u If you select Android Auto, you cannot select Audio and Phone.  
4. Select Connect.  
5. Select Yes.  
u If your Android phone asks to accept for connecting Android Auto, accept for  
connection. A confirmation message for HondaLink Assist appears.  
6. Select Yes or No.  
■
Connect Android Auto wirelessly at start-up (when there is no phone  
paired to the system)  
1. Set the power mode to ACCESSORY or ON.  
2. Select OK.  
u If there is no registered device, the Bluetooth® pairing screen will be displayed.  
u If you check the box with Do not show this again, this screen will not be  
displayed.  
3. Pair the Android phone to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.  
2 Phone Setup P. 468  
4. Check the box on Android Auto.  
u If you select Android Auto, you cannot select Audio and Phone.  
5. Select Connect.  
6. Select Yes.  
u If your Android phone asks to accept for connecting Android Auto, accept for  
connection. A confirmation message for HondaLink Assist appears.  
7. Select Yes or No.  
Continued  
357  
uuAudio System Basic OperationuAndroid AutoTM  
1Operating Android Auto with Voice Recognition  
Operating Android Auto with Voice Recognition  
■
Press and hold the  
Below are examples of commands you can give with  
voice recognition:  
(talk) button to operate Android Auto with your voice.  
•
•
•
•
•
•
Reply to text.  
Call my wife.  
Navigate to Honda.  
Play my music.  
Send a text message to my wife.  
Call flower shop.  
For more information, please refer to the Android  
Auto homepage.  
You can also activate the voice recognition function  
(Talk) Button:  
by selecting the  
the screen.  
icon in the lower-right corner of  
Press and hold to operate  
Android Auto with your voice.  
Press and release to activate  
standard voice recognition  
system.  
358  

Related Topics

Features
Audio System Audio Error Messages General Information on the Audio System Customized Features Honda LogR* HomeLink? Universal Transceiver* Bluetooth? HandsFreeLink? Refuel Recommend

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot