2023-2026 Honda Civic 4 Door Maintenance User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance for Your Honda Civic 4 Door Eleventh Generation (2023-2026)

Maintenance  
This chapter discusses basic maintenance.  
Before Performing Maintenance  
Engine Coolant................................ 719  
Fluid: Transmission Fluid................... 723  
Brake/Clutch* Fluid.......................... 724  
Refilling Window Washer Fluid......... 725  
Replacing Light Bulbs....................... 726  
Checking and Maintaining Wiper Blades ....731  
Checking and Maintaining Tires  
Checking Tires ................................. 734  
Tire and Loading Information Label ... 735  
Tire Labeling .................................... 735  
DOT Tire Quality Grading (U.S. Vehicles)....737  
Wear Indicators................................ 739  
Tire Service Life................................ 739  
Tire and Wheel Replacement ........... 740  
Tire Rotation.................................... 741  
Winter Tires..................................... 742  
Inspection and Maintenance ............690  
Safety When Performing Maintenance.... 691  
Parts and Fluids Used in Maintenance  
Service ...........................................692  
Maintenance MinderTM .....................693  
Maintenance Under the Hood  
Maintenance Items Under the Hood ....705  
Opening the Hood...........................708  
Recommended Engine Oil ................709  
Oil Check.........................................711  
Adding Engine Oil............................714  
Changing the Engine Oil and Oil Filter..... 715  
Battery............................................... 745  
Remote Transmitter Care  
Replacing the Remote Battery.......... 747  
Climate Control System Maintenance ....748  
Cleaning  
Interior Care .................................... 749  
Exterior Care.................................... 751  
Accessories and Modifications  
Accessories...................................... 754  
Modifications................................... 755  
* Not available on all models  
689  
Before Performing Maintenance  
Inspection and Maintenance  
For your safety, perform all listed inspections and maintenance to keep your vehicle  
in good condition. If you become aware of any abnormality (noise, smell, insufficient  
brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer.  
(Note, however, that service at a dealer is not mandatory to keep your warranties in  
effect.)  
1Inspection and Maintenance  
U.S. models  
Maintenance, replacement, or repair of  
emissions control devices and systems may be  
done by any automotive repair establishment or  
individuals using parts that are “certified” to  
EPA standards.  
Types of Inspection and Maintenance  
■
According to state and federal regulations, failure to  
perform maintenance on the maintenance main  
items marked with # will not void your emissions  
warranties. However, all maintenance services should  
be performed in accordance with the intervals  
indicated by the driver information interface.  
2 Maintenance Service Items P. 698  
■
Perform inspections before long distance trips, when washing the vehicle, or when  
Routine inspections  
refueling.  
2 Maintenance P. 36  
■
Periodic inspections  
• Check the brake/clutch* fluid level monthly.  
If you want to perform complex maintenance tasks  
that require more skills and tools, you can purchase a  
subscription to the Service Express website at  
www.techinfo.honda.com.  
2 Brake/Clutch* Fluid P. 724  
• Check the tire pressure monthly. Examine the tread for wear and foreign objects.  
2 Checking and Maintaining Tires P. 734  
• Check the operation of the exterior lights monthly.  
2 Replacing Light Bulbs P. 726  
2 Authorized Manuals P. 824  
If you want to perform maintenance yourself, make  
sure that you have the necessary tools and skills first.  
After performing maintenance, update the records in  
the separate maintenance booklet.  
• Check the condition of the wiper blades at least every six months.  
2 Checking and Maintaining Wiper Blades P. 731  
* Not available on all models  
690  
uuBefore Performing MaintenanceuSafety When Performing Maintenance  
Safety When Performing Maintenance  
Some of the most important safety precautions are given here. However, we cannot  
warn you of every conceivable hazard that can arise in performing maintenance.  
Only you can decide whether you should perform a given task.  
1Safety When Performing Maintenance  
3
WARNING  
Improperly maintaining this vehicle or  
failing to correct a problem before driving  
can cause a crash in which you can be  
seriously hurt or killed.  
Maintenance Safety  
■
• To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames  
away from the battery and all fuel related parts.  
• Never leave rags, towels, or other flammable objects under the hood.  
u Heat from the engine and exhaust can ignite them, causing a fire.  
• To clean parts, use a commercially available degreaser or parts cleaner, not  
gasoline.  
Always follow the inspection and  
maintenance recommendations according  
to the schedules in this owner's manual.  
• Wear eye protection and protective clothing when working with the battery or  
compressed air.  
3
WARNING  
• Engine exhaust contains carbon monoxide, which is poisonous and can kill you.  
u Only operate the engine if there is sufficient ventilation.  
Failure to properly follow maintenance  
instructions and precautions can cause you  
to be seriously hurt or killed.  
Vehicle Safety  
■
Always follow the procedures and  
precautions in this owner's manual.  
• The vehicle must be in a stationary condition.  
u Make sure your vehicle is parked on level ground, the parking brake is set, and  
the engine is off.  
• Be aware that hot parts can burn you.  
u Make sure to let the engine and exhaust system cool thoroughly before  
touching vehicle parts.  
• Be aware that moving parts can injure you.  
u Do not start the engine unless instructed, and keep your hands and limbs away  
from moving parts.  
u Do not open the hood while the Auto Idle Stop* function is activated.  
* Not available on all models  
691  
uuBefore Performing MaintenanceuParts and Fluids Used in Maintenance Service  
Parts and Fluids Used in Maintenance Service  
The use of Honda genuine parts and fluids is recommended when maintaining and  
servicing your vehicle. Honda genuine parts are manufactured according to the  
same high quality standards used in Honda vehicles.  
1Parts and Fluids Used in Maintenance Service  
2.0 L engine models  
NOTICE  
Do not press the engine cover forcibly. This may  
damage the engine cover and component parts.  
692  
Maintenance MinderTM  
If the engine oil life is less than 15%, you will see the Maintenance Minder messages  
appear on the driver information interface every time you set the power mode to  
ON. The messages notify you when to change the engine oil, or when to bring your  
vehicle to a dealer for indicated maintenance services.  
693  
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
To Use Maintenance MinderTM  
1Displaying the Maintenance Minder Information  
Displaying the Maintenance Minder Information  
■
Maintenance items, which should be serviced at the same time that you replace the  
Based on the engine operating conditions, the  
remaining engine oil life is calculated and displayed  
as a percentage.  
engine oil, appear on the driver information interface.  
You can view them on the engine oil life screen at any time.  
Displayed Engine Oil Calculated Engine Oil  
Models with A-type meter  
Life (%)  
100  
90  
Life (%)  
100 to 91  
90 to 81  
80 to 71  
70 to 61  
60 to 51  
50 to 41  
40 to 31  
30 to 21  
20 to 16  
15 to 11  
10 to 6  
5 to 1  
1. Set the power mode to ON.  
2. Press the (home) button.  
3. Roll the left selector wheel until  
is displayed.  
80  
4. Press the left selector wheel to go to the Maintenance Minder screen. The engine  
oil life appears on the driver information interface along with maintenance items  
due soon.  
70  
60  
50  
40  
30  
20  
15  
10  
5
Engine Oil Life  
0
0
There is a list of maintenance main and sub items you  
can view on the driver information interface.  
2 Maintenance Service Items P. 698  
Left Selector Wheel  
Main Item  
Sub Item  
(home) Button  
694  
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
Models with B-type meter  
1. Set the power mode to ON.  
2. Roll the right selector wheel until the Maintenance Minder screen is displayed.  
The engine oil life appears on the driver information interface along with  
maintenance items due soon.  
Engine Oil Life  
Sub Item  
Right Selector Wheel  
Main Item  
Continued  
695  
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
Maintenance Minder Messages on the Driver Information Interface  
■
Maintenance Message  
Oil Life Display  
Explanation  
Information  
When you select the  
Maintenance Minder screen,  
it displays codes for  
*2  
*1  
—
maintenance items due at  
the next engine oil change,  
along with the percentage of  
engine oil life remaining.  
—
Maintenance Due Soon  
15 %  
The remaining engine oil life The engine oil is approaching  
the end of its service life, and  
the maintenance items should  
be inspected and serviced  
soon.  
is 15 to 6 percent.  
*2  
*1  
Models with A-type meter  
Press the  
(home)  
button to switch to another  
display.  
Models with B-type meter  
Roll the right selector wheel  
to switch to another display.  
*1:Models with A-type meter  
*2:Models with B-type meter  
696  
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
Maintenance Message  
Oil Life Display  
Explanation  
Information  
Maintenance Due Now  
5 %  
The remaining engine oil life The engine oil has almost  
reached the end of its service  
life, and the maintenance items  
should be inspected and  
is 5 to 1 percent.  
*2  
*1  
Models with A-type meter  
Press the (home) button  
to switch to another display.  
serviced as soon as possible.  
Models with B-type meter  
Roll the right selector wheel  
to switch to another display.  
The engine oil life has passed The engine oil life has passed.  
its service life, and a negative The maintenance items must  
distance appears after driving be inspected and serviced  
over 10 miles (U.S. models) or immediately.  
10 km (Canadian models).  
Negative Distance  
Maintenance Past Due  
*2  
*1  
The negative distance on the  
display blinks.  
Models with A-type meter  
Press the (home) button  
to switch to another display.  
Models with B-type meter  
Roll the right selector wheel  
to switch to another display.  
*1:Models with A-type meter  
*2:Models with B-type meter  
The system message indicator ( ) comes on along with the Maintenance Minder  
message.  
Continued  
697  
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
Maintenance Service Items  
■
Maintenance Minder Message  
*1  
*2  
System Message  
Indicator  
Main Item  
Sub Items  
*1: Models with A-type meter  
*2: Models with B-type meter  
698  
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
U.S. models with Auto Idle Stop  
1Maintenance Service Items  
•
Adjust the valves during services A, B, 1, 2, or 3 if  
they are noisy.  
CODE  
Maintenance Main Items  
CODE  
Maintenance Sub Items  
●
●
A
B
Replace engine oil*1  
1
2
Rotate tires  
Replace engine oil*1 and oil filter  
Inspect front and rear brakes  
Inspect these items:  
Replace air cleaner element*2  
Replace dust and pollen filter*3  
Inspect drive belt  
●
●
●
●
●
●
Replace transmission fluid*4  
●
• Tie rod ends, steering gearbox, and boots  
• Suspension components  
• Driveshaft boots  
• Brake hoses and lines (including ABS/VSA®)  
• All fluid levels and condition of fluids  
• Exhaust system#  
• Fuel lines and connections#  
3
4
●
●
Replace spark plugs  
Inspect valve clearance  
Replace engine coolant  
Replace brake fluid*5  
●
●
5
7
*2: If you drive in dusty conditions, replace the air cleaner element every 15,000 miles (24,000 km).  
*3: If you drive primarily in urban areas that have high concentrations of soot in the air from industry and  
from diesel-powered vehicles, replace the dust and pollen filter every 15,000 miles (24,000 km).  
*4: Driving in mountainous areas at very low vehicle speeds results in higher transmission temperatures.  
This requires transmission fluid changes more frequently than recommended by the Maintenance  
*1: If a Maintenance Minder message does not appear more than 12 months after the display is reset,  
change the engine oil every year.  
# : See information on maintenance and emissions warranty in the first column on page 821.  
MinderTM  
.
Continuously variable transmission models  
If you regularly drive your vehicle under these conditions, have the transmission fluid changed every  
25,000 miles (40,000 km).  
Manual transmission models  
If you regularly drive your vehicle under these conditions, have the transmission fluid changed every  
37,500 miles (60,000 km).  
*5: If a Maintenance Minder message does not appear more than 36 months after the display for item 7 is  
reset, change the brake fluid every 3 years.  
Continued  
699  
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
Canadian models with Auto Idle Stop  
1Maintenance Service Items  
•
Adjust the valves during services A, 0, 9, 1, 2, or 3  
if they are noisy.  
CODE  
Maintenance Main Items  
Replace engine oil*1  
Replace engine oil*1 and oil filter  
CODE  
Maintenance Sub Items  
●
●
●
A
0
1
2
Rotate tires  
Replace air cleaner element*2  
Replace dust and pollen filter*3  
Inspect drive belt  
●
●
●
*1: If a Maintenance Minder message does not appear more than 12 months after the display is reset,  
change the engine oil every year.  
*2: If you drive in dusty conditions, replace the air cleaner element every 24,000 km (15,000 miles).  
*3: If you drive primarily in urban areas that have high concentrations of soot in the air from industry and  
from diesel-powered vehicles, replace the dust and pollen filter every 24,000 km (15,000 miles).  
*4: Driving in mountainous areas at very low vehicle speeds results in higher transmission temperatures.  
This requires transmission fluid changes more frequently than recommended by the Maintenance  
Replace transmission fluid*4  
●
3
4
●
●
Replace spark plugs  
Inspect valve clearance  
MinderTM  
.
●
●
5
7
9
Replace engine coolant  
Replace brake fluid*5  
Continuously variable transmission models  
If you regularly drive your vehicle under these conditions, have the transmission fluid changed every  
40,000 km (25,000 miles).  
Manual transmission models  
If you regularly drive your vehicle under these conditions, have the transmission fluid changed every  
60,000 km (37,500 miles).  
●
●
Service front and rear brakes  
Inspect these items:  
• Tie rod ends, steering gearbox, and boots  
• Suspension components  
• Driveshaft boots  
*5: If a Maintenance Minder message does not appear more than 36 months after the display for item 7 is  
reset, change the brake fluid every 3 years.  
# : See information on maintenance and emissions warranty in the first column on page 823.  
• Brake hoses and lines (including ABS/VSA®)  
• All fluid levels and condition of fluids  
• Exhaust system#  
• Fuel lines and connections#  
700  
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
U.S. models without Auto Idle Stop  
1Maintenance Service Items  
•
Adjust the valves during services A, B, 1, 2, or 3 if  
they are noisy.  
CODE  
Maintenance Main Items  
CODE  
Maintenance Sub Items  
●
●
A
B
Replace engine oil*1  
1
2
Rotate tires  
Replace engine oil*1 and oil filter  
Inspect front and rear brakes  
Check expiry date for tire repair kit bottle  
Inspect these items:  
• Tie rod ends, steering gearbox, and boots  
• Suspension components  
• Driveshaft boots  
• Brake hoses and lines (including ABS/VSA®)  
• All fluid levels and condition of fluids  
• Exhaust system#  
• Fuel lines and connections#  
Replace air cleaner element*2  
Replace dust and pollen filter*3  
Inspect drive belt  
●
●
●
●
●
●
●
Replace transmission fluid*4  
●
3
4
●
●
Replace spark plugs  
Inspect valve clearance  
Replace engine coolant  
Replace brake fluid*5  
●
●
5
7
*2: If you drive in dusty conditions, replace the air cleaner element every 15,000 miles (24,000 km).  
*3: If you drive primarily in urban areas that have high concentrations of soot in the air from industry and  
from diesel-powered vehicles, replace the dust and pollen filter every 15,000 miles (24,000 km).  
*4: Driving in mountainous areas at very low vehicle speeds results in higher transmission temperatures.  
This requires transmission fluid changes more frequently than recommended by the Maintenance  
*1: If a Maintenance Minder message does not appear more than 12 months after the display is reset,  
change the engine oil every year.  
# : See information on maintenance and emissions warranty in the first column on page 821.  
MinderTM  
.
If you regularly drive your vehicle under these conditions, have the transmission fluid changed every  
37,500 miles (60,000 km).  
*5: If a Maintenance Minder message does not appear more than 36 months after the display for item 7 is  
reset, change the brake fluid every 3 years.  
Continued  
701  
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
Canadian models without Auto Idle Stop  
1Maintenance Service Items  
•
Adjust the valves during services A, 0, 9, 1, 2, or 3  
if they are noisy.  
CODE  
Maintenance Main Items  
Replace engine oil*1  
Replace engine oil*1 and oil filter  
CODE  
Maintenance Sub Items  
●
●
●
A
0
1
2
Rotate tires  
Replace air cleaner element*2  
Replace dust and pollen filter*3  
Inspect drive belt  
●
●
●
*1: If a Maintenance Minder message does not appear more than 12 months after the display is reset,  
change the engine oil every year.  
*2: If you drive in dusty conditions, replace the air cleaner element every 24,000 km (15,000 miles).  
*3: If you drive primarily in urban areas that have high concentrations of soot in the air from industry and  
from diesel-powered vehicles, replace the dust and pollen filter every 24,000 km (15,000 miles).  
*4: Driving in mountainous areas at very low vehicle speeds results in higher transmission temperatures.  
This requires transmission fluid changes more frequently than recommended by the Maintenance  
●
3
4
Replace transmission fluid*4  
●
●
Replace spark plugs  
Inspect valve clearance  
MinderTM  
.
●
●
5
7
9
Replace engine coolant  
Replace brake fluid*5  
If you regularly drive your vehicle under these conditions, have the transmission fluid changed every  
60,000 km (37,500 miles).  
*5: If a Maintenance Minder message does not appear more than 36 months after the display for item 7 is  
reset, change the brake fluid every 3 years.  
# : See information on maintenance and emissions warranty in the first column on page 823.  
●
●
●
Service front and rear brakes  
Check expiry date for tire repair kit bottle  
Inspect these items:  
• Tie rod ends, steering gearbox, and boots  
• Suspension components  
• Driveshaft boots  
• Brake hoses and lines (including ABS/VSA®)  
• All fluid levels and condition of fluids  
• Exhaust system#  
• Fuel lines and connections#  
702  
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
1Resetting the Display  
Resetting the Display  
■
Reset the maintenance minder information display if you have performed the  
maintenance service.  
NOTICE  
Failure to reset the Maintenance MinderTM display  
after a maintenance service results in the system  
showing incorrect maintenance intervals, which can  
lead to serious mechanical problems.  
Models with A-type meter  
The dealer will reset the Maintenance MinderTM  
display after completing the required maintenance  
service. If someone other than a dealer performs  
maintenance service, reset the Maintenance  
MinderTM display yourself.  
Models with 7-in. Color Touchscreen  
You can also reset the Maintenance MinderTM display  
using the driver information interface.  
2 Settings P. 138  
Left Selector Wheel  
(home) Button  
Models with 9-in. Color Touchscreen  
You can also reset the Maintenance MinderTM display  
using the audio/information screen.  
2 Customized Features P. 390  
1. Set the power mode to ON.  
2. Press the (home) button.  
3. Roll the left selector wheel until  
is displayed.  
4. Press the left selector wheel to go to the Maintenance Minder screen.  
5. Press and hold the left selector wheel for about 10 seconds to enter the reset  
mode.  
6. Roll the left selector wheel to select a maintenance item to reset, or to select All  
due items (You can also select Cancel to end the process).  
7. Press the left selector wheel to reset the selected item.  
8. Repeat from step 5 for other items you wish to reset.  
Continued  
703  
uuMaintenance MinderTMuTo Use Maintenance MinderTM  
Models with B-type meter  
Right Selector Wheel  
1. Set the power mode to ON.  
2. Roll the right selector wheel until the Maintenance Minder screen is displayed.  
3. Press and hold the right selector wheel for about 10 seconds to enter the reset  
mode.  
4. Roll the right selector wheel to select a maintenance item to reset, or to select All  
due items (You can also select Cancel to end the process).  
5. Press the right selector wheel to reset the selected item.  
6. Repeat from step 3 for other items you wish to reset.  
704  
Maintenance Under the Hood  
Maintenance Items Under the Hood  
1.5 L engine models  
Brake/Clutch* Fluid  
(Black Cap)  
Engine Oil Fill Cap  
Washer Fluid  
(Blue Cap)  
Engine Coolant  
Reserve Tank  
Battery  
Engine Oil Dipstick  
(Orange)  
Radiator Cap  
* Not available on all models  
Continued  
705  
uuMaintenance Under the HooduMaintenance Items Under the Hood  
2.0 L engine models with Auto Idle Stop  
Engine Oil Dipstick  
(Orange)  
Brake/Clutch*  
Fluid (Black Cap)  
Engine Oil Fill Cap  
Washer Fluid  
(Blue Cap)  
Battery  
Engine Coolant  
Reserve Tank  
Radiator Cap  
* Not available on all models  
706  
uuMaintenance Under the HooduMaintenance Items Under the Hood  
2.0 L engine models without Auto Idle Stop  
Engine Oil Dipstick  
(Black)  
Brake/Clutch Fluid  
(Black Cap)  
Engine Oil Fill Cap  
Engine Coolant  
Reserve Tank Cap  
Washer Fluid  
(Blue Cap)  
Battery  
Engine Coolant  
Reserve Tank  
707  
uuMaintenance Under the HooduOpening the Hood  
Opening the Hood  
1. Park the vehicle on a level surface, and set  
the parking brake.  
1Opening the Hood  
Hood Release Handle  
3WARNING  
The hood support rod can become very hot  
due to heat from the engine.  
2. Pull the hood release handle under the  
driver's side lower corner of the dashboard.  
u The hood will pop up slightly.  
Pull  
To ensure against possible burns, do not  
handle the metal section of the rod: Use  
the foam grip instead.  
3. Push the hood latch lever (located under  
the front edge of the hood to the center) to  
the side and raise the hood. Once you have  
raised the hood slightly, you can release the  
lever.  
NOTICE  
Do not open the hood when the wiper arms are  
raised. The hood will strike the wipers, resulting in  
possible damage to the hood and/or the wipers.  
Lever  
2.0 L engine models  
NOTICE  
Do not press the engine cover forcibly. This may  
damage the engine cover and component parts.  
4. Remove the support rod from the clamp  
using the grip. Mount the support rod in  
the hood.  
Support Rod  
When closing the hood, check that the hood is  
securely latched.  
Grip  
If the hood latch lever moves stiffly, or if you can  
open the hood without lifting the lever, the latch  
mechanism should be cleaned and lubricated.  
When closing, remove the support rod, and  
stow it in the clamp, then gently lower the  
hood. Remove your hand at a height of  
approximately 12 inches (30 cm) and let the  
hood close.  
Do not open the hood while the Auto Idle Stop*  
function is activated.  
Clamp  
* Not available on all models  
708  
uuMaintenance Under the HooduRecommended Engine Oil  
Recommended Engine Oil  
Use a genuine engine oil or another commercial engine oil of suitable type and  
viscosity (for the ambient temperature) as shown in the image that follows.  
1Recommended Engine Oil  
Engine Oil Additives  
Your vehicle does not require oil additives. In fact,  
they may adversely affect the engine performance  
and durability.  
Oil is a major contributor to your engine's performance and longevity. If you drive  
the vehicle with insufficient or deteriorated oil, the engine may fail or be damaged.  
Models with Auto Idle Stop  
Genuine Engine Oil  
Commercial Engine Oil  
●
●
Honda Genuine Motor Oil  
Premium-grade 0W-20 detergent oil  
with an API Certification Seal on the  
container.  
Ambient Temperature  
Ambient Temperature  
*1:Formulated to improve fuel economy.  
Continued  
709  
uuMaintenance Under the HooduRecommended Engine Oil  
Models without Auto Idle Stop  
1Recommended Engine Oil  
The following seal indicates the oil is energy  
conserving and that it meets the American Petroleum  
Institute's latest requirements.  
Genuine Engine Oil  
Commercial Engine Oil  
●
●
●
Honda Genuine Motor Oil  
API service SN or higher grade  
API Certification Mark “Starburst”  
Ambient Temperature  
Ambient Temperature  
*1:Formulated to improve fuel economy.  
Synthetic oil  
■
You may also use synthetic motor oil if it is labeled with the API Certification Seal  
and is the specified viscosity grade.  
710  
uuMaintenance Under the HooduOil Check  
Oil Check  
We recommend that you check the engine oil level every time you refuel.  
Park the vehicle on level ground.  
1Oil Check  
If the oil level is near or below the lower mark, slowly  
add oil, being careful not to overfill.  
Wait approximately three minutes after turning the engine off before you check the oil.  
1. Remove the dipstick (orange or black).  
2. Wipe the dipstick with a clean cloth or  
paper towel.  
1.5 L engine models  
3. Insert the dipstick back all the way into its  
hole.  
2.0 L engine models with Auto Idle Stop  
Continued  
711  
uuMaintenance Under the HooduOil Check  
2.0 L engine models without Auto Idle  
Stop  
712  
uuMaintenance Under the HooduOil Check  
4. Remove the dipstick again, and check the  
level. It should be between the upper and  
lower marks. Add oil if necessary.  
1Oil Check  
1.5 L engine models  
NOTICE  
Under certain driving conditions, it is normal for the  
engine oil level to rise above the upper mark. If you  
have a concern, consult a dealer for details.  
Upper Mark  
Lower Mark  
2.0 L engine models  
Upper Mark  
Lower Mark  
713  
uuMaintenance Under the HooduAdding Engine Oil  
Adding Engine Oil  
1. Unscrew and remove the engine oil fill cap.  
2. Add oil slowly.  
1.5 L engine models  
1Adding Engine Oil  
NOTICE  
3. Reinstall the engine oil fill cap, and tighten  
it securely.  
Do not fill the engine oil above the upper mark.  
Overfilling the engine oil may result in leaks and  
engine damage.  
4. Wait for three minutes and recheck the  
engine oil dipstick.  
If any oil spills, wipe it away immediately. Spilled oil  
may damage the engine compartment components.  
Engine Oil  
Fill Cap  
2.0 L engine models with Auto Idle Stop  
Engine Oil  
Fill Cap  
2.0 L engine models without Auto Idle  
Stop  
Engine Oil  
Fill Cap  
714  
uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter  
Changing the Engine Oil and Oil Filter  
You must change the engine oil and oil filter regularly in order to maintain the  
engine's lubrication. The engine may be damaged if they are not changed regularly.  
1Changing the Engine Oil and Oil Filter  
NOTICE  
You may damage the environment if you do not  
dispose of the oil in a suitable way. If you are  
changing the oil by yourself, appropriately dispose of  
the used oil. Put the oil in a sealed container and take  
it to a recycling center. Do not throw the oil away  
into a garbage can or onto the ground.  
Change the oil and filter in accordance with the maintenance message on the driver  
information interface.  
1. Run the engine until it reaches normal  
operating temperature, and then turn the  
engine off.  
Models with Auto Idle Stop  
2. Open the hood and remove the engine oil  
fill cap.  
3. Remove the Phillips-head screws and  
slotted head screws by turning 90°  
counter-clockwise on the undercarriage  
and remove the under cover.  
Screw  
Under Cover  
Models without Auto Idle Stop  
Screw  
Under Cover  
Continued  
715  
uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter  
4. Remove the drain bolt and washer from  
the bottom of the engine, and drain the  
oil into a suitable container.  
1.5 L engine models  
Drain Bolt  
Washer  
2.0 L engine models with Auto Idle Stop  
Drain Bolt  
Washer  
2.0 L engine models without Auto Idle  
Stop  
Drain Bolt  
Washer  
716  
uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter  
5. Remove the oil filter and dispose of the  
remaining oil.  
6. Check that the filter gasket is not stuck to  
the engine contact surface.  
1.5 L engine models  
1Changing the Engine Oil and Oil Filter  
You will need a special wrench to replace the oil  
filter. You can buy this wrench from a dealer.  
u If it is stuck, you must detach it.  
7. Wipe away dirt and dust adhering to the  
contact surface of the engine block, and  
install a new oil filter.  
u Apply a light coat of new engine oil to  
the filter gasket.  
When installing the new oil filter, follow the  
instructions supplied with the oil filter.  
Reinstall the engine oil fill cap. Start the engine. If the  
Engine oil pressure low appears, turn off the  
engine, and check your work.  
Oil Filter  
8. Put a new washer on the drain bolt, then  
reinstall the drain bolt.  
2.0L engine models with Auto Idle Stop  
u Tightening torque:  
30 lbf∙ft (40 N∙m, 4.0 kgf∙m)  
9. Pour the recommended engine oil into the  
engine.  
u Engine oil change capacity (including  
filter):  
Oil Filter  
1.5 L engine models  
3.7 US qt (3.5 L)  
2.0 L engine models with Auto Idle Stop  
4.4 US qt (4.2 L)  
2.0 L engine models without Auto Idle Stop  
5.7 US qt (5.4 L)  
Continued  
717  
uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter  
10. Reinstall the engine oil fill cap securely and  
start the engine.  
2.0 L engine models without Auto Idle  
Stop  
11. Run the engine for a few minutes, and  
then check that there is no leak from the  
drain bolt or oil filter.  
12. Stop the engine, wait for three minutes,  
and then check the oil level on the  
dipstick.  
Oil Filter  
u If necessary, add more engine oil.  
718  
uuMaintenance Under the HooduEngine Coolant  
Models with Auto Idle Stop  
Engine Coolant  
1Engine Coolant  
Specified coolant: Honda Long Life Antifreeze/Coolant Type 2  
3
WARNING  
This coolant is premixed with 50% antifreeze and 50% water. Do not add any  
straight antifreeze or water.  
Removing the radiator cap while the  
engine is hot can cause the coolant to spray  
out, seriously scalding you.  
We recommend you check the engine coolant level every time you refuel. Check the  
reserve tank first. If it is completely empty, also check the coolant level in the  
radiator. Add the engine coolant accordingly.  
Always let the engine and radiator cool  
down before removing the radiator cap.  
Reserve Tank  
■
NOTICE  
1. Make sure the engine and radiator are  
cool.  
Reserve Tank  
Genuine Honda engine coolant is a 50/50 mixture of  
antifreeze and water that can withstand freezing at  
temperatures as low as about −31°F (−35°C). If your  
vehicle is consistently subjected to temperatures  
below this, the concentration of antifreeze in the  
coolant should be increased. Consult a dealer for  
details.  
2. Check the amount of coolant in the reserve  
tank.  
MAX  
MIN  
u If the coolant level is below the MIN  
mark, add the specified coolant until it  
reaches the MAX mark.  
3. Inspect the cooling system for leaks.  
If Honda antifreeze/coolant is not available, you may  
use another major brand of non-silicate coolant as a  
temporary replacement. Check that it is a high quality  
coolant recommended for aluminum engines.  
Continued use of any non-Honda coolant can result  
in corrosion, causing the cooling system to  
malfunction or fail. Have the cooling system flushed  
and refilled with Honda antifreeze/coolant as soon as  
possible.  
Continued  
719  
uuMaintenance Under the HooduEngine Coolant  
1Engine Coolant  
Radiator  
■
Do not add rust inhibitors or other additives to your  
vehicle's cooling system. They may not be compatible  
with the coolant or with the engine components.  
1. Make sure the engine and radiator are  
cool.  
2. Turn the radiator cap 1/8 turn counter-  
clockwise and relieve any pressure in the  
cooling system.  
1Radiator  
NOTICE  
3. Push down and turn the radiator cap  
counter-clockwise to remove it.  
4. The coolant level should be up to the base  
of the filler neck. Add coolant if it is low.  
5. Put the radiator cap back on, and tighten it  
fully.  
Pour the fluid slowly and carefully so you do not spill  
any. Clean up any spills immediately; they can  
damage components in the engine compartment.  
Radiator Cap  
720  
uuMaintenance Under the HooduEngine Coolant  
Models without Auto Idle Stop  
Engine Coolant  
1Engine Coolant  
Specified coolant: Honda Long Life Antifreeze/Coolant Type 2  
3
WARNING  
This coolant is premixed with 50% antifreeze and 50% water. Do not add any  
straight antifreeze or water.  
Removing the reserve tank cap while the  
engine is hot can cause the coolant to spray  
out, seriously scalding you.  
We recommend you check the engine coolant level every time you refuel. Check the  
reserve tank. Add the engine coolant accordingly.  
Always let the engine and radiator cool  
down before removing the reserve tank  
cap.  
Checking the Coolant  
■
1. Make sure the engine and radiator are  
cool.  
NOTICE  
2. Check the amount of coolant in the reserve  
tank.  
Genuine Honda engine coolant is a 50/50 mixture of  
antifreeze and water that can withstand freezing at  
temperatures as low as about −31°F (−35°C). If your  
vehicle is consistently subjected to temperatures  
below this, the concentration of antifreeze in the  
coolant should be increased. Consult a dealer for  
details.  
u If the coolant level is below the MIN  
mark, add the specified coolant until it  
reaches the MAX mark.  
3. Inspect the cooling system for leaks.  
Reserve Tank  
If Honda antifreeze/coolant is not available, you may  
use another major brand of non-silicate coolant as a  
temporary replacement. Check that it is a high quality  
coolant recommended for aluminum engines.  
Continued use of any non-Honda coolant can result  
in corrosion, causing the cooling system to  
malfunction or fail. Have the cooling system flushed  
and refilled with Honda antifreeze/coolant as soon as  
possible.  
Continued  
721  
uuMaintenance Under the HooduEngine Coolant  
1Engine Coolant  
Adding the Coolant  
■
Do not add rust inhibitors or other additives to your  
vehicle's cooling system. They may not be compatible  
with the coolant or with the engine components.  
1. Make sure the engine and radiator are  
cool.  
2. Turn the reserve tank cap 1/8 turn counter-  
clockwise and relieve any pressure in the  
cooling system.  
1Adding the Coolant  
NOTICE  
3. Push down and turn the reserve tank cap  
counter-clockwise to remove it.  
4. Pour coolant into the reserve tank until it  
reaches the MAX mark.  
Pour the fluid slowly and carefully so you do not spill  
any. Clean up any spills immediately; they can  
damage components in the engine compartment.  
Reserve Tank Cap  
5. Put the reserve tank cap back on, and  
tighten it fully.  
722  
uuMaintenance Under the HooduFluid: Transmission Fluid  
Fluid: Transmission Fluid  
Continuously variable transmission models  
1Continuously Variable Transmission (CVT) Fluid  
Continuously Variable Transmission (CVT) Fluid  
■
NOTICE  
Specified fluid: Honda HCF-2  
Do not mix Honda HCF-2 with other  
transmission fluids.  
Have a dealer check the fluid level and replace if necessary.  
Using a transmission fluid other than Honda HCF-2 may  
adversely affect the operation and durability of your  
vehicle's transmission, and damage the transmission.  
Any damage caused by using a transmission fluid that  
is not equivalent to Honda HCF-2 is not covered by  
Honda's new vehicle limited warranty.  
Do not attempt to check or change the continuously variable transmission fluid  
yourself.  
Manual transmission models  
1Manual Transmission Fluid  
Manual Transmission Fluid  
■
NOTICE  
Specified fluid: Honda MTF  
If Honda MTF is not available, you may use the API  
certificated SAE 0W-20 or 5W-20 viscosity motor oil as a  
temporary measure.  
Have a dealer check the fluid level and replace if necessary.  
Replace with MTF as soon as possible. Motor oil does  
not contain the proper additives for the transmission  
and continued use can cause decreased shifting  
performance and lead to transmission damage.  
Do not attempt to check or change the manual transmission fluid yourself.  
723  
uuMaintenance Under the HooduBrake/Clutch* Fluid  
Brake/Clutch* Fluid  
1Brake/Clutch* Fluid  
Specified fluid: Honda Heavy Duty Brake Fluid DOT 3  
NOTICE  
Brake fluid marked DOT 5 is not compatible with your  
vehicle's braking system and can cause extensive  
damage.  
Checking the Brake Fluid  
■
The fluid level should be between the MIN  
and MAX marks on the side of the reserve  
tank.  
Models with Auto Idle Stop  
If the specified brake fluid is not available, you should  
use only DOT 3 or DOT 4 fluid from a sealed  
container as a temporary replacement.  
MAX  
Manual transmission models  
The brake fluid reserve tank is also used for  
your vehicle's clutch fluid. As long as you keep  
the brake fluid level as instructed above, there  
is no need for checking the clutch fluid level.  
MIN  
Using any non-Honda brake fluid can cause corrosion  
and decrease the longevity of the system. Have the  
brake system flushed and refilled with Honda Heavy  
Duty Brake Fluid DOT 3 as soon as possible.  
Reserve Tank  
Models without Auto Idle Stop  
If the brake fluid level is at or below the MIN mark,  
have a dealer inspect the vehicle for leaks or worn  
brake pads as soon as possible.  
MAX  
MIN  
Reserve Tank  
* Not available on all models  
724  
uuMaintenance Under the HooduRefilling Window Washer Fluid  
Refilling Window Washer Fluid  
Check the amount of window washer fluid.  
1Refilling Window Washer Fluid  
If the level is low, fill the washer reservoir.  
NOTICE  
Do not use engine antifreeze or a vinegar/water  
solution in the windshield washer reservoir.  
Antifreeze can damage your vehicle's paint. A  
vinegar/water solution can damage the windshield  
washer pump.  
Canadian models with Auto Idle Stop  
If the washer fluid is low, a message appears  
on the driver information interface.  
Use only commercially available windshield washer  
fluid.  
Avoid prolonged use of hard water to prevent lime  
scale buildup.  
Pour the washer fluid carefully. Do not overflow the reservoir.  
725  
Replacing Light Bulbs  
Headlights  
Headlights are LED type. Have an authorized Honda dealer inspect and replace the  
light assembly.  
1Headlights  
The headlight aim is set by the factory, and does not  
need to be adjusted. However, if you regularly carry  
heavy items in the cargo area, have the aiming  
readjusted at a dealer or by a qualified technician.  
Fog Lights*  
Fog lights are LED type. Have an authorized Honda dealer inspect and replace the  
light assembly.  
Front Turn Signal Lights  
Front turn signal lights are LED type. Have an authorized Honda dealer inspect and  
replace the light assembly.  
Front Side Marker Lights  
Front side marker lights are LED type. Have an authorized Honda dealer inspect and  
replace the light assembly.  
Parking/Daytime Running Lights  
Parking/daytime running lights are LED type. Have an authorized Honda dealer  
inspect and replace the light assembly.  
Side Turn Signal/Emergency Indicator Lights*  
Door mirror side turn lights are LED type. Have an authorized Honda dealer inspect  
and replace the light assembly.  
* Not available on all models  
726  
uuReplacing Light BulbsuBrake Light, Taillight, Rear Side Marker Light, and Rear Turn Signal Light Bulbs  
Brake Light, Taillight, Rear Side Marker Light, and  
Rear Turn Signal Light Bulbs  
1Brake Light, Taillight, Rear Side Marker Light, and Rear Turn  
Signal Light Bulbs  
When replacing, use the following bulbs.  
Brake lights, taillights, and rear side marker lights are  
LED type. Have an authorized Honda dealer inspect  
and replace the light assembly.  
Brake Light: LED  
Taillight: LED  
Rear Side Marker Light: LED  
Rear Turn Signal Light: 21 W (Amber)  
1. Pry on the edge of the cover using a flat-tip  
screwdriver to remove the cover.  
u Wrap the flat-tip screwdriver with a cloth  
to prevent scratches.  
Cover  
2. Unscrew the bolts.  
Bolt  
Continued  
727  
uuReplacing Light BulbsuBrake Light, Taillight, Rear Side Marker Light, and Rear Turn Signal Light Bulbs  
3. Grasp underneath the taillight and rotate it  
upward to release the lower snap pin.  
Lower Snap Pin  
4. Rotate the taillight outward to release the  
upper snap pin.  
5. Pull the light assembly out of the rear pillar.  
Upper Snap Pin  
6. Turn the socket counter-clockwise and  
remove it.  
7. Remove the old bulb and insert a new bulb.  
8. Align the pins with the body grommets,  
then push in until they fully seat.  
Bulb  
Socket  
728  
uuReplacing Light BulbsuTaillight and Back-Up Light Bulbs  
Taillight and Back-Up Light Bulbs  
When replacing, use the following bulbs.  
1Taillight and Back-Up Light Bulbs  
Taillights are LED type. Have an authorized Honda  
dealer inspect and replace the light assembly.  
Taillight: LED  
Back-Up Light: 16 W  
1. Remove the cover by prying on the edge  
using a flat-tip screwdriver.  
u Wrap the flat-tip screwdriver with a cloth  
to prevent scratches.  
Cover  
Bulb  
2. Turn the socket counter-clockwise and  
remove it.  
3. Remove the old bulb and insert a new bulb.  
Socket  
Rear License Plate Light  
Rear license plate light is LED type. Have an authorized Honda dealer inspect and  
replace the light assembly.  
729  
uuReplacing Light BulbsuHigh-Mount Brake Light  
High-Mount Brake Light  
High-mount brake light is LED type. Have an authorized Honda dealer inspect and  
replace the light assembly.  
730  
Checking and Maintaining Wiper Blades  
Checking Wiper Blades  
If the wiper blade rubber has deteriorated, it will leave streaks, become noisy, and  
the hard surfaces of the blade may scratch the window glass.  
Changing the Front Wiper Blade  
1. Set the power mode to ON, then to  
VEHICLE OFF.  
1Changing the Front Wiper Blade  
NOTICE  
2. Within 10 seconds of setting the power  
mode to VEHICLE OFF, hold the wiper  
switch in the MIST position for more than  
two seconds.  
Avoid dropping the wiper arm onto the windshield, it  
may damage the wiper arm and/or the windshield.  
u Both wiper arms are set to the  
maintenance position as shown in the  
image.  
3. Lift both wiper arms.  
Continued  
731  
uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade  
4. Depress the lock tab, then slide the wiper  
blade off the wiper arm.  
5. Slide the new wiper blade onto the wiper  
arm until it clicks into place.  
6. Lower both wiper arms.  
7. Set the power mode to ON, then set the  
wiper switch to the MIST position once.  
u The wiper arms return to the standard  
position.  
Tab  
732  
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade  
Changing the Rear Wiper Blade  
1. Hold up the wiper arm.  
2. Insert a flat-tip screwdriver into the groove  
of the wiper arm to remove the wiper  
blade.  
u Wrap the flat-tip screwdriver with a cloth  
to prevent scratches.  
3. Insert a new wiper blade and put the wiper  
arm back.  
733  
Checking and Maintaining Tires  
Checking Tires  
To safely operate your vehicle, your tires must be of the proper type and size, in  
good condition with adequate tread, and properly inflated.  
1Checking Tires  
3
WARNING  
■
Inflation guidelines  
Using tires that are excessively worn or  
improperly inflated can cause a crash in  
which you can be seriously hurt or killed.  
Properly inflated tires provide the best combination of handling, tread life, and  
comfort. Refer to the driver's doorjamb label or specifications page for the specified  
pressure.  
Follow all instructions in this owner's  
manual regarding tire inflation and  
maintenance.  
Underinflated tires wear unevenly, adversely affect handling and fuel economy, and  
are more likely to fail from overheating.  
Overinflated tires make your vehicle ride harshly, are more prone to road hazards,  
and wear unevenly.  
Measure the air pressure when tires are cold. This  
means the vehicle has been parked for at least three  
hours, or driven less than 1 mile (1.6 km). If  
necessary, add or release air until the specified  
pressure is reached.  
Every day before you drive, look at each of the tires. If one looks lower than the  
others, check the pressure with a tire gauge.  
If checked when hot, tire pressure can be as much as  
4–6 psi (30–40 kPa, 0.3–0.4 kgf/cm2) higher than if  
checked when cold.  
At least once a month or before long trips, use a gauge to measure the pressure in  
all tires, including the spare*. Even tires in good condition can lose 1-2 psi (10-20  
kPa, 0.1-0.2 kgf/cm2) per month.  
U.S. models  
Whenever tire pressure is adjusted, you must  
calibrate the TPMS.  
2 TPMS Calibration P. 539  
■
Inspection guidelines  
Every time you check inflation, also examine the tires and valve stems. Look for:  
• Bumps or bulges on the side or in the tread. Replace the tire if you find any cuts,  
splits, or cracks in the side of the tire. Replace it if you see fabric or cord.  
• Remove any foreign objects and inspect for air leaks.  
• Uneven tread wear. Have a dealer check the wheel alignment.  
• Excessive tread wear.  
Have a dealer check the tires if you feel a consistent  
vibration while driving. New tires and any that have  
been removed and reinstalled should be properly  
balanced.  
2 Wear Indicators P. 739  
• Cracks or other damage around valve stem.  
* Not available on all models  
734  
uuChecking and Maintaining TiresuTire and Loading Information Label  
Tire and Loading Information Label  
The label attached to the driver's doorjamb provides necessary tire and loading  
information.  
1Tire and Loading Information Label  
The tire and loading information label attached to the  
driver's doorjamb contains:  
a
b
The number of people your vehicle can carry.  
The total weight your vehicle can carry. Do not  
exceed this weight.  
Label  
Example  
c
d
The original tire sizes for front, rear, and spare.  
The proper cold tire pressure for front, rear, and  
spare.  
Tire Labeling  
The tires that came on your vehicle have a  
number of markings. Those you should be  
aware of are described as shown.  
Example  
Tire Size  
Tire  
Identification  
Number (TIN)  
1Tire Sizes  
Following is an example of tire size with an  
explanation of what each component means.  
P205/55 R16 89H  
Maximum  
Tire Load  
Maximum  
Tire Pressure  
Tire Size  
P: Vehicle type (P indicates passenger vehicle).  
205: Tire width in millimeters.  
55: Aspect ratio (the tire's section height as a  
percentage of its width).  
R: Tire construction code (R indicates radial).  
16: Rim diameter in inches.  
Tire Sizes  
■
Whenever tires are replaced, they should be replaced with tires of the same size.  
89: Load index (a numerical code associated with the  
maximum load the tire can carry).  
H: Speed symbol (an alphabetical code indicating the  
maximum speed rating).  
Continued  
735  
uuChecking and Maintaining TiresuTire Labeling  
1Tire Identification Number (TIN)  
Tire Identification Number (TIN)  
■
The tire identification number (TIN) is a group of numbers and letters that look like  
the example in the side column. TIN is located on the sidewall of the tire.  
DOT B97R FW6X 2209  
DOT: This indicates that the tire meets all  
requirements of the U.S. Department of  
Transportation.  
B97R: Manufacturer's identification mark.  
FW6X: Tire type code.  
22 09: Date of manufacture.  
Glossary of Tire Terminology  
■
Cold Tire Pressure – The tire air pressure when the vehicle has been parked for at  
least three hours or driven less than 1 mile (1.6 km).  
Year  
Week  
Load Rating – Means the maximum load that a tire is rated to carry for a given  
inflation pressure.  
Maximum Inflation Pressure – The maximum tire air pressure that the tire can  
hold.  
Maximum Load Rating – Means the load rating for a tire at the maximum  
permissible inflation pressure for that tire.  
Recommended Inflation Pressure – The cold tire inflation pressure recommended  
by the manufacturer.  
Treadwear Indicators (TWI) – Means the projections within the principal grooves  
designed to give a visual indication of the degrees of wear of the tread.  
736  
uuChecking and Maintaining TiresuDOT Tire Quality Grading (U.S. Vehicles)  
DOT Tire Quality Grading (U.S. Vehicles)  
The tires on your vehicle meet all U.S. Federal Safety  
Requirements. All tires are also graded for treadwear, traction,  
and temperature performance according to Department of  
Transportation (DOT) standards. The following explains these  
gradings.  
1Uniform Tire Quality Grading  
Uniform Tire Quality Grading  
■
For example:  
Quality grades can be found where applicable on the tire sidewall  
between tread shoulder and maximum section width.  
Treadwear 200  
Traction AA  
Temperature A  
Treadwear  
■
All passenger car tires must conform  
to Federal Safety Requirements in  
addition to these grades.  
The treadwear grade is a comparative rating based on the wear  
rate of the tire when tested under controlled conditions on a  
specified government test course. For example, a tire graded 150  
would wear one and one-half (1 1/2) times as well on the  
government course as a tire graded 100. The relative performance  
of tires depends upon the actual conditions of their use, however,  
and may depart significantly from the norm due to variations in  
driving habits, service practices and differences in road  
characteristics and climate.  
Continued  
737  
uuChecking and Maintaining TiresuDOT Tire Quality Grading (U.S. Vehicles)  
1Traction  
Traction  
■
Warning: The traction grade  
assigned to this tire is based on  
straight-ahead braking traction tests,  
and does not include acceleration,  
cornering, hydroplaning, or peak  
traction characteristics.  
The traction grades, from highest to lowest, are AA, A, B, and C.  
Those grades represent the tire's ability to stop on wet pavement  
as measured under controlled conditions on specified  
government test surfaces of asphalt and concrete. A tire marked  
C may have poor traction performance.  
1Temperature  
Temperature  
■
Warning: The temperature grade for  
this tire is established for a tire that is  
properly inflated and not  
overloaded. Excessive speed,  
underinflation, or excessive loading,  
either separately or in combination,  
can cause heat buildup and possible  
tire failure.  
The temperature grades are A (the highest), B, and C,  
representing the tire's resistance to the generation of heat and its  
ability to dissipate heat when tested under controlled conditions  
on a specified indoor laboratory test wheel. Sustained high  
temperature can cause the material of the tire to degenerate and  
reduce tire life, and excessive temperature can lead to sudden tire  
failure. The grade C corresponds to a level of performance which  
all passenger car tires must meet under the Federal Motor Vehicle  
Safety Standard No. 109. Grades B and A represent higher levels  
of performance on the laboratory test wheel than the minimum  
required by law.  
738  
uuChecking and Maintaining TiresuWear Indicators  
Wear Indicators  
The groove where the wear indicator is  
located is about 1/16 inch (about 1.6 mm)  
shallower than elsewhere on the tire. If the  
tread has worn so that the indicator is  
exposed, replace the tire.  
1Checking Tires  
Example of a Wear  
Indicator mark  
Models with 265/30ZR19 tires  
High speed driving  
We recommend that you do not drive faster than the  
posted speed limits and conditions allow. If you drive  
at sustained high speeds (over 130 mph or  
210 km/h), adjust the cold tire pressures as shown  
below to avoid excessive heat buildup and sudden  
tire failure.  
Worn out tires have poor traction on wet  
roads.  
Tire Size 265/30ZR19 93Y  
Front: 41 psi (280 kPa, 2.9 kgf/cm2)  
Pressure  
Rear: 33 psi (230 kPa, 2.3 kgf/cm2)  
Tire Service Life  
The life of your tires is dependent on many factors, including driving habits, road  
conditions, vehicle loading, inflation pressure, maintenance history, speed, and  
environmental conditions (even when the tires are not in use).  
In addition to regular inspections and inflation pressure maintenance, it is  
recommended that you have annual inspections performed once the tires reach five  
years old. All tires, including the spare*, should be removed from service after 10  
years from the date of manufacture, regardless of their condition or state of wear.  
* Not available on all models  
739  
uuChecking and Maintaining TiresuTire and Wheel Replacement  
Tire and Wheel Replacement  
Replace your tires with radials of the same size, load range, speed rating, and  
maximum cold tire pressure rating (as shown on the tire's sidewall). Using tires of a  
different size or construction can cause certain vehicle systems such as the ABS and  
Vehicle Stability AssistTM (VSA®) system to work incorrectly.  
1Tire and Wheel Replacement  
3
WARNING  
Installing improper tires on your vehicle can  
affect handling and stability. This can cause  
a crash in which you can be seriously hurt or  
killed.  
It is best to replace all four tires at the same time. If that isn't possible, replace the  
front or rear tires in pairs.  
Always use the size and type of tires  
recommended in this owner's manual.  
Make sure that the wheel's specifications match those of the original wheels.  
740  
uuChecking and Maintaining TiresuTire Rotation  
Tire Rotation  
Rotating tires according to the maintenance messages on the driver information  
interface helps to distribute wear more evenly and increase tire life.  
1Tire Rotation  
Tires with directional tread patterns should only be  
rotated front to back (not from one side to the other).  
Directional tires should be mounted with the rotation  
indication mark facing forward, as shown below.  
■
Tires without rotation marks  
Rotate the tires as shown here.  
Front  
Front  
Direction Mark  
■
Tires with rotation marks  
U.S. models  
Rotate the tires as shown here.  
Whenever tires are rotated, you must calibrate the  
TPMS.  
2 TPMS Calibration P. 539  
Front  
741  
uuChecking and Maintaining TiresuWinter Tires  
Winter Tires  
If driving on snowy or frozen roads, mount all season marked M+S tires, snow tires,  
or tire chains; reduce speed; and maintain sufficient distance between vehicles when  
driving.  
1Winter Tires  
3
WARNING  
Using the wrong chains, or not properly  
installing chains, can damage the brake  
lines and cause a crash in which you can be  
seriously injured or killed.  
Be particularly careful when operating the steering wheel or brakes to prevent  
skidding.  
Use tire chains, snow tires, or all season tires when necessary or according to the  
law.  
Follow all instructions in this owner's  
manual regarding the selection and use of  
tire chains.  
When mounting, refer to the following points.  
For winter tires:  
• Select the size and load ranges that are the same as the original tires.  
• Mount the tires to all four wheels.  
NOTICE  
Traction devices that are the wrong size or improperly  
installed can damage your vehicle's brake lines,  
suspension, body, and wheels. Stop driving if they are  
hitting any part of the vehicle.  
742  
uuChecking and Maintaining TiresuWinter Tires  
For tire chains:  
• Install them on the front tires only.  
1Winter Tires  
When tire chains are mounted, follow the chain  
manufacturer's instructions regarding vehicle  
operational limits.  
• Because your vehicle has limited tire clearance, we strongly recommend using the  
chains listed below:  
Models with 215/55R16 tires  
If your vehicle is equipped with summer tires, be  
aware that these tires are not designed for winter  
driving conditions. For more information, contact a  
dealer.  
Cable-type: SCC Radial Chain SC1032  
Models with 215/50R17 tires  
Cable-type: SCC Radial Chain SC1032  
Models with 235/40R18 tires  
Cable-type: SCC Radial Chain SC1034  
• Follow the chain manufacturer's instruction when installing. Mount them as  
tightly as you can.  
• Check that the chains do not touch the brake lines or suspension.  
• Drive slowly.  
Models with 265/30ZR19 tires  
Not recommended to use any type of chain or cable  
743  
uuChecking and Maintaining TiresuCold Weather Driving  
Cold Weather Driving  
Summer Only tires and Ultra High Performance (UHP) tires are very sensitive to  
ambient temperatures and are designed to be used at temperatures above 45°F  
(7°C). If the vehicle is operated with Summer Only tires or UHP tires at temperatures  
below 45°F (7°C), the tires will provide decreasing amounts of grip and other  
performance attributes. If the vehicle is operated with Summer Only tires or UHP  
tires at temperatures below -14°F (-10°C), the tire tread may lose their elasticity and  
become brittle, resulting in permanent damage to the tread. A damaged tire may  
fail during use. Therefore, if you operate the vehicle when ambient temperatures are  
below 45°F (7°C), we recommend that you install other tires (e.g., mud+snow,  
winter) that are designed to provide appropriate performance attributes under the  
anticipated conditions.  
1Winter Tires  
3
WARNING  
Use of Summer Only tires or Ultra High  
Performance tires at temperatures below  
45°F (7°C) may lead to a loss of  
performance and control, which could  
result in a crash, serious injury or death.  
744  
Battery  
Checking the Battery  
The condition of the battery is monitored by a  
sensor located on the negative terminal of the  
battery. If there is a problem with this sensor,  
the driver information interface will display a  
warning message. If this happens, have your  
vehicle inspected by a dealer.  
Models with Auto Idle Stop  
1Battery  
3WARNING  
The battery gives off explosive hydrogen  
gas during normal operation.  
A spark or flame can cause the battery to  
explode with enough force to kill or  
seriously hurt you.  
Check the battery terminals for corrosion  
monthly.  
If your vehicle's battery is disconnected or  
goes dead:  
Models without Auto Idle Stop  
When conducting any battery  
maintenance, wear protective clothing and  
a face shield, or have a skilled technician do  
it.  
• The audio system is disabled.  
2 Reactivating the audio system P. 259  
Canadian models only  
• The immobilizer system needs to be reset.  
2 Immobilizer System Indicator P. 110  
WARNING: Battery post, terminals,  
and related accessories contain lead  
and lead compounds.  
Wash your hands after handling.  
745  
uuBatteryuCharging the Battery  
Charging the Battery  
Disconnect both battery cables to prevent damaging your vehicle's electrical system.  
Always disconnect the negative (–) cable first, and reconnect it last.  
1Battery  
When you find corrosion, clean the battery terminals  
by applying a baking powder and water solution.  
Clean the terminals with a damp towel. Cloth/towel  
dry the battery. Coat the terminals with grease to  
help prevent future corrosion.  
When replacing the battery, the replacement must be  
of the same specifications.  
Consult a dealer for more information.  
The battery installed in this vehicle is specifically  
designed for a model with Auto Idle Stop*.  
Using a battery other than this specified type may  
shorten the battery life, and prevent Auto Idle Stop*  
from activating. If you need to replace the battery,  
make sure to select the specified type and size. Ask a  
dealer for more details.  
The Vehicle Stability AssistTM (VSA®) system, Vehicle  
Stability AssistTM (VSA®) OFF*, Adaptive Cruise  
Control (ACC) with Low Speed Follow, safety support  
and low tire pressure/ TPMS* indicators may come on  
in amber along with a message in the gauge when  
you set the power mode to ON after reconnecting  
the battery.  
Drive a short distance at more than 12 mph (20 km/h).  
Each indicator should go off. If any do not, have your  
vehicle checked by a dealer.  
* Not available on all models  
746  
Remote Transmitter Care  
Replacing the Remote Battery  
If the indicator does not come on when the button is pressed, replace the battery.  
1Replacing the Remote Battery  
Battery type: CR2032  
3WARNING  
CHEMICAL BURN HAZARD  
1. Remove the built-in key.  
The battery that powers the remote  
transmitter can cause severe internal burns  
and can even lead to death if swallowed.  
Keep new and used batteries away from  
children.  
If you suspect that a child has swallowed  
the battery, seek medical attention  
immediately.  
2. Remove the upper half of the cover by  
carefully prying on the slot with key grip.  
u Wrap a key grip with a cloth to prevent  
scratching the keyless remote.  
NOTICE  
u Remove carefully to avoid losing the  
buttons.  
An improperly disposed of battery can damage the  
environment. Always confirm local regulations for  
battery disposal.  
Replacement batteries are commercially available or  
at a dealer.  
3. Remove the battery by prying on the edge  
with flat-tip screwdriver. Make sure to  
replace the battery with the correct polarity.  
u Wrap a flat-tip screwdriver with a cloth  
to prevent scratching the keyless remote.  
Battery  
747  
Climate Control System Maintenance  
Air Conditioning  
To ensure proper and safe operation, the Society of Automotive Engineers (SAE  
J2845) recommends that the refrigerant system only be serviced by trained and  
certified technicians.  
1Air Conditioning  
NOTICE  
Vented refrigerant is harmful to the environment.  
To avoid refrigerant from venting, never replace the  
evaporator with one removed from a used or  
salvaged vehicle.  
Never repair or replace the air conditioning evaporator (cooling coil) with one  
removed from a used or salvaged vehicle.  
Refrigerant in your vehicle's air conditioning system is  
flammable and can be ignited during servicing if  
proper procedures are not followed.  
New replacement mobile air conditioning evaporators must be certified (and  
labeled) as meeting SAE Standard J2842.  
The air conditioner label is found under the hood:  
2 Safety Labels P. 93  
2 Specifications P. 812  
Canadian models  
: Caution  
: Flammable Refrigerant  
: Requires Registered  
Technician to Service  
: Air Conditioning  
System  
Dust and Pollen Filter  
The climate control system is equipped with a dust and pollen filter that collects  
pollen, dust, and other debris in the air. The Maintenance MinderTM messages will let  
you know when to replace the filter.  
1Dust and Pollen Filter  
If the airflow from the climate control system  
deteriorates noticeably, and the windows fog up  
easily, the filter may need to be replaced. Please  
contact a dealer for replacement.  
We recommend that you replace the dust and pollen filter sooner when using your  
vehicle in areas with high concentrations of dust.  
748  
Cleaning  
Interior Care  
Use a damp cloth with a mixture of mild detergent and warm water to remove dirt.  
Use a clean cloth to remove detergent residue.  
1Interior Care  
Do not spill liquids inside the vehicle. Electrical  
devices and systems may malfunction if liquids are  
splashed on them.  
Cleaning Seat Belts  
■
Use a soft brush with a mixture of mild soap and warm water to clean the seat belts.  
Let the belts air dry. Wipe the openings of the seat belt anchors using a clean cloth.  
Do not use silicone based sprays on electrical devices  
such as audio devices and switches. Doing so may  
cause the items to malfunction or cause a fire inside  
the vehicle.  
Opening  
If a silicone based spray is inadvertently used on  
electrical devices, consult a dealer.  
Depending on their composition, chemicals and  
liquid aromatics may cause discoloration, wrinkles,  
and cracking to resin-based parts and textiles.  
Do not use alkali solvents or organic solvents such as  
benzene or gasoline.  
After using chemicals, make sure to gently wipe them  
away using a dry cloth.  
Do not place used cloths on top of resin based parts  
or textiles for long periods of time without washing.  
1Cleaning the Window  
Cleaning the Window  
■
Wipe using a glass cleaner.  
Wires are mounted to the inside of the rear window.  
Wipe along the same direction as the wires with a  
soft cloth so as not to damage them.  
Be careful not to spill fluids, such as water or glass  
cleaner, on or around the cover of both the front  
wide view camera and the rainfall/light sensor*.  
* Not available on all models  
Continued  
749  
uuCleaninguInterior Care  
1Floor Mats  
Floor Mats  
■
If you use any floor mats that were not originally  
provided with your vehicle, make sure they are  
designed for your specific vehicle, fit correctly, and  
are securely anchored by the floor anchors.  
Position any rear seat floor mats properly. If not  
properly positioned, the floor mats can interfere with  
the front seat functions.  
The driver's floor mat hooks over floor  
anchors, which keep the mat from sliding  
forward. To remove a mat for cleaning, turn  
the anchor knobs to the unlock position.  
When reinstalling the mat after cleaning, turn  
the knobs to the lock position.  
Unlock  
Lock  
Do not put additional floor mats on top of  
the anchored mat.  
1Maintaining Genuine Leather*  
Maintaining Genuine Leather*  
■
To properly clean leather:  
It is important to clean or wipe away dirt or dust as  
soon as possible. Spills can soak into leather resulting  
in stains. Dirt or dust can cause abrasions in the  
leather. In addition, please note that some dark  
colored clothing can rub onto the leather seats  
resulting in discoloration or stains.  
1. Use a vacuum or soft dry cloth first to remove any dirt or dust.  
2. Clean the leather with a soft cloth dampened with a solution comprised of 90%  
water and 10% neutral soap.  
3. Wipe away any soap residue with a clean damp cloth.  
4. Wipe away residual water and allow leather to air dry in the shade.  
* Not available on all models  
750  
uuCleaninguExterior Care  
Exterior Care  
Dust off the vehicle body after you drive. Regularly inspect your vehicle for scratches  
on painted surfaces. A scratch on a painted surface can result in body rust. If you  
find a scratch, promptly repair it.  
1Washing the Vehicle  
Washing the Vehicle  
■
Wash the vehicle regularly. Wash more frequently when driving in the following  
Do not spray water into the air intake and hood  
intake* vents. It can cause a malfunction.  
conditions:  
• If driving on roads with road salt.  
Models with Auto Idle Stop  
• If driving in coastal areas.  
• If tar, soot, bird droppings, insects, or tree sap are stuck to painted surfaces.  
Using an Automated Car Wash  
■
• Make sure to follow the instructions indicated on the automated car wash.  
• Fold in the door mirrors.  
• For models equipped with automatic intermittent wipers, turn the wipers off.  
Air Intake Vents  
Models without Auto Idle Stop  
Air Intake Vents  
Using High Pressure Cleaners  
■
• Keep sufficient distance between the cleaning nozzle and the vehicle body.  
• Take particular care around the windows. Standing too close may cause water to  
enter the vehicle interior.  
• Do not spray high pressure water directly into the engine compartment. Instead,  
use low pressure water and a mild detergent.  
• Do not spray water directly onto the camera or the area around it. Water may  
enter the lens and cause the camera to malfunction.  
Hood Intake Vent  
Lock the doors when washing the vehicle.  
Do not spray water onto the fuel fill door directly. A  
high-pressure spray may cause it to open.  
* Not available on all models  
Continued  
751  
uuCleaninguExterior Care  
1Washing the Vehicle  
Applying Wax  
■
Models without Auto Idle Stop  
A good coat of automotive body wax helps protect your vehicle's paint from the  
elements. Wax will wear off over time and expose your vehicle's paint to the  
elements, so reapply as necessary.  
Do not spray water onto the capless unit when the  
fuel fill door is open. It can cause damage to the fuel  
system or engine.  
If you need to lift the wiper arms away from the  
windshield, first set the wiper arms to the  
maintenance position.  
Maintaining the Bumpers and Other Resin Coated Parts  
■
If you get gasoline, oil, engine coolant, or battery fluid on resin coated parts, they  
may be stained or the coating may peel. Promptly wipe it away using a soft cloth and  
clean water.  
2 Changing the Front Wiper Blade P. 731  
1Applying Wax  
NOTICE  
Cleaning the Window  
■
Wipe using a glass cleaner.  
Chemical solvents and strong cleaners can damage  
the paint, metal, and plastic on your vehicle. Wipe  
away spills immediately.  
Maintaining Aluminum Wheels  
■
1Maintaining the Bumpers and Other Resin Coated Parts  
Aluminum is susceptible to deterioration caused by salt and other road  
contaminants. When necessary, as early as possible use a sponge and mild detergent  
to wipe away these contaminants. Do not use a stiff brush or harsh chemicals  
(including some commercial wheel cleaners). These can damage the protective finish  
on aluminum alloy wheels, resulting in corrosion. Depending on the type of finish,  
the wheels also may lose their luster or appear burnished. To avoid water stains,  
wipe the wheels dry with a cloth while they are still wet.  
Ask a dealer about the correct coating material when  
you want to repair the painted surface of the parts  
made of resin.  
752  
uuCleaninguExterior Care  
Fogged Exterior Light Lenses  
■
The inside lenses of exterior lights (headlights, brake lights, etc.) may fog temporarily  
if you have driven in the rain, or after the vehicle has been run through a car wash.  
Dew condensation also may build up inside the lenses when there is a significant  
enough difference between the ambient and inside lens temperatures (similar to  
vehicle windows fogging up in rainy conditions). These conditions are natural  
processes, not structural design problems in the exterior lights.  
Lens design characteristics may result in moisture developing on the light lens frame  
surfaces. This also is not a malfunction.  
However, if you see large amounts of water accumulation, or large water drops  
building up inside the lenses, have your vehicle inspected by a dealer.  
753  
Accessories and Modifications  
Accessories  
When installing accessories, check the following:  
• Do not install accessories on the windshield. They can obstruct your view and  
delay your reaction to driving conditions.  
1Accessories and Modifications  
3
WARNING  
• Do not install any accessories over areas marked SRS AIRBAG, on the sides or  
backs of the front seats, on the sides of the rear seats, on front or side pillars, or  
near the side windows.  
Improper accessories or modifications can  
affect your vehicle's handling, stability, and  
performance, and cause a crash in which  
you can be seriously hurt or killed.  
Accessories installed in these areas may interfere with proper operation of the  
vehicle's airbags or may be propelled into you or another occupant if the airbags  
deploy.  
Follow all instructions in this owner's  
manual regarding accessories and  
modifications.  
• Be sure electronic accessories do not overload electrical circuits or interfere with  
proper operation of your vehicle.  
2 Fuses P. 799  
• Before installing any electronic accessory, have the installer contact a dealer for  
assistance. If possible, have a dealer inspect the final installation.  
Honda Genuine accessories are recommended to  
ensure proper operation on your vehicle.  
754  
uuAccessories and ModificationsuModifications  
Modifications  
Do not modify your vehicle in a manner that may affect its handling, stability, or  
reliability, or install non-genuine Honda parts or accessories that may have a similar  
effect.  
Even minor modifications to vehicle systems can affect overall vehicle performance.  
Always make sure all equipment is properly installed and maintained, and do not  
make any modification to your vehicle or its systems that might cause your vehicle  
to no longer meet federal, state, province, territory, and local regulations.  
The on-board diagnostic port (OBD-II/SAE J1962 connector) installed on this vehicle  
is intended to be used with automobile system diagnostic devices or with other  
devices that Honda has approved. Use of any other type of device may adversely  
affect the vehicle's electronic systems or allow them to be compromised, possibly  
resulting in a system malfunction, drained battery, or other unexpected problems.  
Do not modify or attempt to repair any of the electrical components.  
755  
This page intentionally left blank.  
756  

Related Topics

Before Performing Maintenance Maintenance Minder? Maintenance Under the Hood Replacing Light Bulbs Checking and Maintaining Wiper Blades Checking and Maintaining Tires Battery Remote Transmitter Care Climate Control System Maintenance Cleaning Accessories and Modifications

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot