Get Maintenance -> Checking and Maintaining Wiper Blades Guide for Honda Civic 4 Door Eleventh Generation (2023-2026)

Checking and Maintaining Wiper Blades

Checking Wiper Blades

If the wiper blade rubber has deteriorated, it will leave streaks, become noisy, and

the hard surfaces of the blade may scratch the window glass.

Changing the Front Wiper Blade

1. Set the power mode to ON, then to

VEHICLE OFF.

1Changing the Front Wiper Blade

NOTICE

2. Within 10 seconds of setting the power

mode to VEHICLE OFF, hold the wiper

switch in the MIST position for more than

two seconds.

Avoid dropping the wiper arm onto the windshield, it

may damage the wiper arm and/or the windshield.

u Both wiper arms are set to the

maintenance position as shown in the

image.

3. Lift both wiper arms.

Continued

731

uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade

4. Depress the lock tab, then slide the wiper

blade off the wiper arm.

5. Slide the new wiper blade onto the wiper

arm until it clicks into place.

6. Lower both wiper arms.

7. Set the power mode to ON, then set the

wiper switch to the MIST position once.

u The wiper arms return to the standard

position.

Tab

732

uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade

Changing the Rear Wiper Blade

1. Hold up the wiper arm.

2. Insert a flat-tip screwdriver into the groove

of the wiper arm to remove the wiper

blade.

u Wrap the flat-tip screwdriver with a cloth

to prevent scratches.

3. Insert a new wiper blade and put the wiper

arm back.

733

Maintenance -> Checking and Maintaining Wiper Blades for Your Honda Civic 4 Door Eleventh Generation (2023-2026)