2016-2020 Honda Jazz 4 Door Controls User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Controls for Your Honda Jazz 4 Door Third Generation (2016-2020)

18 FIT JAZZ-32T5A6100.book 139 ページ 2017年8月23日 水曜日 午前11時24分  
Controls  
This chapter explains how to operate the various controls necessary for driving.  
Clock....................................................... 140  
Locking and Unlocking the Doors  
Operating the Switches Around the  
Steering Wheel  
Models without keyless access system  
Ignition Switch.......................................... 164  
Models with keyless access system  
ENGINE START/STOP Button ..................... 165  
Ignition Switch and Power Mode Comparison....168  
Turn Signals......................................... 169  
Light Switches ..................................... 170  
Fog Lights............................................ 172  
Headlight Adjuster* ............................. 174  
AutoHigh-Beam(HighBeamSupportSystem)*...175  
Daytime Running Lights....................... 178  
Wipers and Washers............................ 179  
Brightness Control................................182  
Rear Demister/Heated Door Mirror*......183  
Adjusting the Steering Wheel ...............184  
Adjusting the Mirrors  
Interior Rearview Mirror........................185  
Power Door Mirrors..............................186  
Adjusting the Seats  
Key Types and Functions ...................... 142  
Low Keyless Remote Signal Strength* ....... 145  
Locking/Unlocking the Doors from the  
Outside.............................................. 146  
Locking/Unlocking the Doors from the  
Inside............................................. 153  
Childproof Door Locks ......................... 155  
Opening and Closing the Tailgate....... 156  
Security System  
Immobilizer System .............................. 159  
Security System Alarm* ........................ 159  
Super Locking* .................................... 161  
Opening and Closing the Windows..... 162  
Front Seats ...........................................187  
Rear Seats ............................................190  
Interior Lights/Interior Convenience Items.... 199  
*
Heating and Cooling System  
Using Vents, Heating and A/C ...................209  
Climate Control System  
*
Using Automatic Climate Control ..............213  
Automatic Climate Control Sensors ...........218  
* Not available on all models  
139  
18 FIT JAZZ-32T5A6100.book 140 ページ 2017年8月23日 水曜日 午前11時24分  
Clock  
Adjusting the Clock  
You can adjust the time in the clock display with the ignition switch in ON (w*1.  
1Adjusting the Clock  
Models with display audio system  
The clock in the multi-information display is  
automatically adjusted along with the audio system’s  
clock display.  
Adjusting the Time  
Models with display audio system  
Using the settings menu on the audio/information screen  
1. Select the  
(HOME) icon, then select  
You can customize the clock display to show the 12  
hour clock or 24 hour clock.  
2 Customized Features P. 313  
Settings.  
2. Select Info, Clock, then Clock  
Adjustment.  
3. Adjust the hours and minutes by selecting  
+20(  
92/  
You can turn the clock display on and off.  
2 Customized Features P. 313  
0(18  
%$&.  
3
4
/
.
4. Select OK to set the time.  
The clock is automatically updated when your  
smartphone is connected to the audio system.  
Models with navigation system  
The clock is automatically updated through the  
navigation system, so the time does not need to be  
adjusted.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
140  
18 FIT JAZZ-32T5A6100.book 141 ページ 2017年8月23日 水曜日 午前11時24分  
uuClockuAdjusting the Clock  
Models with colour audio system  
1Adjusting the Time  
Using the MENU/CLOCK button  
1. Press and hold the MENU/CLOCK button.  
u Adjust clock is selected.  
Models with colour audio system  
These indications are used to show how to operate  
the LIST/SELECT (Selector) knob.  
Rotate  
Press  
to select.  
to enter.  
2. Rotate  
3. Rotate  
.
to change hour, then press  
to change minute, then press  
.
You can customize the clock display to show the 12  
hour clock or 24 hour clock.  
2 Customized Features P. 313  
4. To enter the selection, rotate  
Set, then press  
and select  
.
You can turn the clock display on and off.  
2 Customized Features P. 313  
You can also select Adjust clock by pressing the  
MENU/CLOCK button.  
Rotate  
to select Adjust clock, then press  
.
The clock in the multi-information display is  
automatically adjusted along with the audio system’s  
clock display.  
Setting the Time Zone  
Models with display audio system  
Using the settings menu on the audio/information screen  
1. Select the  
Settings.  
(HOME) icon, then select  
2. Select Info, Clock, then Time Zone.  
3. Select your time zone.  
+20(  
92/  
0(18  
%$&.  
141  
18 FIT JAZZ-32T5A6100.book 142 ページ 2017年8月23日 水曜日 午前11時24分  
Locking and Unlocking the Doors  
Key Types and Functions  
This vehicle comes with the following keys:  
Use the key to start and stop the engine, and  
1Key Types and Functions  
All the keys have an immobilizer system. The  
immobilizer system helps to protect against vehicle  
theft.  
Keyless Remote*  
to lock and unlock* all the doors and tailgate.  
You can also use the remote transmitter or  
keyless access system* to lock and unlock all  
the doors and tailgate.  
2 Immobilizer System P. 159  
Follow the advice below to prevent damage to the  
keys:  
Do not leave the keys in direct sunlight, or in  
locations with high temperature or high humidity.  
Do not drop the keys or set heavy objects on them.  
Keep the keys away from liquids, dust and sand.  
Do not take the keys apart except for replacing the  
battery.  
Retractable Key*  
If the circuits in the keys are damaged, the engine  
may not start, and the remote transmitter/keyless  
access system* may not work.  
If the keys do not work properly, have them  
inspected by a dealer.  
* Not available on all models  
142  
18 FIT JAZZ-32T5A6100.book 143 ページ 2017年8月23日 水曜日 午前11時24分  
uuLocking and Unlocking the DoorsuKey Types and Functions  
Built-in Key*  
The built-in key can be used to lock/unlock the  
doors when the keyless remote battery  
becomes weak and the power door lock/  
unlock operation is disabled.  
Release Knob  
To remove the built-in key, slide the release  
knob and then pull out the key. To reinstall  
the built-in key, push the built-in key into the  
keyless remote until it clicks.  
Built-in Key  
*
1Retractable keys  
Retractable keys*  
If the key is not fully extended, the immobilizer  
system may not work properly, and the engine may  
not start.  
Avoid contact with the key whenever it extends or  
retracts.  
The key folds up inside the remote  
transmitter.  
1. Press the release button to release the key  
out from the transmitter.  
Release Button  
Push  
u Make sure to fully extend the key.  
2. To close the key, press the release button  
then push the key inside the transmitter  
until you hear a click.  
* Not available on all models  
Continued  
143  
18 FIT JAZZ-32T5A6100.book 144 ページ 2017年8月23日 水曜日 午前11時24分  
uuLocking and Unlocking the DoorsuKey Types and Functions  
1Key Number Tag  
Key Number Tag  
Keep the key number tag separate from the key in a  
safe place outside of your vehicle.  
If you wish to purchase an additional key, contact a  
dealer.  
Contains a number that you will need if you  
purchase a replacement key.  
If you lose your key and you cannot start the engine,  
contact a dealer.  
144  
18 FIT JAZZ-32T5A6100.book 145 ページ 2017年8月23日 水曜日 午前11時24分  
*
uuLocking and Unlocking the DoorsuLow Keyless Remote Signal Strength  
Low Keyless Remote Signal Strength*  
*
The vehicle transmits radio waves to locate the keyless remote when locking/  
unlocking the doors and tailgate, or to start the engine.  
1Low Keyless Remote Signal Strength  
Communication between the keyless remote and the  
vehicle consumes the keyless remote’s battery.  
Battery life is about two years, but this varies  
depending on regularity of use.  
The battery is consumed whenever the keyless  
remote is receiving strong radio waves. Avoid placing  
it near electrical appliances such as televisions and  
personal computers.  
In the following cases, locking/unlocking the doors and tailgate, or starting the  
engine may be inhibited or operation may be unstable:  
Strong radio waves are being transmitted by nearby equipment.  
You are carrying the keyless remote together with telecommunications  
equipment, laptop computers, mobile phones, or wireless devices.  
A metallic object is touching or covering the keyless remote.  
* Not available on all models  
145  
18 FIT JAZZ-32T5A6100.book 146 ページ 2017年8月23日 水曜日 午前11時24分  
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside  
Locking/Unlocking the Doors from the Outside  
1Locking/Unlocking the Doors from the Outside  
Using the Keyless Access System*  
If the interior light switch is in the door activated  
position, the interior lights come on when you press  
the unlock button.  
No doors opened: The lights fade out after 30  
seconds.  
Doors relocked with the remote transmitter: The  
lights go off immediately.  
2 Interior Lights P. 199  
When you carry the keyless remote, you can  
lock/unlock the doors and tailgate.  
You can lock/unlock the doors and the  
tailgate within a radius of about 80 cm (32  
inches) of the outside door handle. You can  
open the tailgate within about 80 cm (32  
inches) radius from the tailgate release  
button.  
*
1Using the Keyless Access System  
If you do not open a door or the tailgate within 30  
seconds of unlocking the vehicle with the keyless  
access system, the doors and tailgate will  
automatically relock.  
You can lock or unlock doors using the keyless access  
system only when the power mode is in VEHICLE OFF.  
Do not leave the keyless remote in the vehicle  
when you get out. Carry it with you.  
Even if you are not carrying the keyless remote, you  
can lock/unlock the doors and the tailgate while  
someone else with the remote is within range.  
The door may be unlocked if the door handle is  
covered with water in heavy rain or in a car wash if  
the keyless remote is within range.  
If you grip a front door handle wearing gloves, the  
door sensor may be slow to respond or may not  
respond by unlocking the doors.  
* Not available on all models  
146  
18 FIT JAZZ-32T5A6100.book 147 ページ 2017年8月23日 水曜日 午前11時24分  
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside  
*
Locking the doors and tailgate  
Press the door lock button on the front door  
or the tailgate.  
1Using the Keyless Access System  
Door Lock Button  
You cannot unlock the door by gripping the handle  
after two seconds of locking it.  
The door may not open if you pull it immediately  
after gripping the door handle. Grip the handle  
again and confirm that the door is unlocked before  
pulling the handle.  
u Some exterior lights flash three times; all  
the doors and tailgate lock; and the  
security system sets.  
Even within the 80 cm (32 inches) radius, you may  
not be able to lock/unlock the doors and the  
tailgate with the keyless remote if it is above or  
below the outside handle.  
The keyless remote may not operate if it is too close  
to the door and door glass.  
Lock Button  
* Not available on all models  
Continued  
147  
18 FIT JAZZ-32T5A6100.book 148 ページ 2017年8月23日 水曜日 午前11時24分  
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside  
Unlocking the doors and the tailgate  
Grab the front door handle:  
u All the doors and tailgate unlock.  
u Some exterior lights flash once.  
Press the tailgate release button:  
u All the doors and tailgate unlock.  
u Some exterior lights flash once.  
2 Using the Tailgate Outer Handle/Release  
Button P. 157  
Tailgate Release  
Button  
148  
18 FIT JAZZ-32T5A6100.book 149 ページ 2017年8月23日 水曜日 午前11時24分  
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside  
1Using the Remote Transmitter  
Using the Remote Transmitter  
If you do not open a door or the tailgate within 30  
seconds of unlocking the vehicle with the remote  
transmitter, the doors and tailgate will automatically  
relock.  
Locking the doors and tailgate  
Press the lock button.  
u Some exterior lights flash three times, all  
the doors and tailgate lock, and the  
security system* sets.  
LED  
Lock  
Button  
Unlock  
Button  
LED  
Right-hand drive models  
Lock  
Button  
You cannot lock any doors from the outside when  
the keyless remote is inside the vehicle, and the  
beeper sounds. If you want to lock a door while the  
remote is still in the vehicle, do any of the following  
four times:  
Unlock  
Button  
Press the lock button on the keyless remote.  
Turn the key in the cylinder to lock.  
Press the door lock button on the door handle or  
the tailgate.  
* Not available on all models  
Continued  
149  
18 FIT JAZZ-32T5A6100.book 150 ページ 2017年8月23日 水曜日 午前11時24分  
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside  
Unlocking the doors  
Press the unlock button.  
u Some exterior lights flash once, and all doors and the tailgate unlock.  
1Using the Remote Transmitter  
The remote transmitter uses low-power signals, so  
the operating range may vary depending on the  
surroundings.  
Models without keyless access system  
The remote transmitter will not work when the key is  
in the ignition switch.  
Models with keyless access system  
You can lock or unlock doors using the remote  
transmitter or keyless access system only when the  
power mode is in VEHICLE OFF.  
All models  
The remote transmitter will not lock the vehicle when  
a door or the tailgate is open.  
If the distance at which the remote transmitter works  
varies, the battery is probably low. Replace the  
button battery as soon as possible.  
If the LED does not come on when you press a  
button, the battery is dead.  
2 Replacing the Button Battery P. 527  
150  
18 FIT JAZZ-32T5A6100.book 151 ページ 2017年8月23日 水曜日 午前11時24分  
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside  
1Locking/Unlocking the Doors Using a Key  
Locking/Unlocking the Doors Using a Key  
When you lock/unlock the driver's door with the key,  
all the other doors and the tailgate lock/unlock at the  
same time.  
If the lock or unlock button of the keyless remote does not work, use the key  
instead.  
Fully insert the key and turn it.  
Models with keyless access system  
Unlocking the doors with the key will cause the  
security system* to alarm. Always unlock the doors  
with the remote transmitter or keyless access  
system*.  
Lock  
Models with retractable key  
If you are using the retractable key, make sure it is  
fully extended.  
Unlock  
Models without keyless access system  
Lock  
Unlock  
* Not available on all models  
Continued  
151  
18 FIT JAZZ-32T5A6100.book 152 ページ 2017年8月23日 水曜日 午前11時24分  
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside  
Locking a Door Without Using a Key  
1Locking a Door Without Using a Key  
If you do not have the key on you, or if for some reason you cannot lock a door using  
the key, you can lock the door without it.  
Locking the driver's door  
When you lock the driver's door, all the other doors  
and tailgate lock at the same time.  
Before locking a door, make sure that the key is not  
inside the vehicle.  
Push the lock tab forward a or push the  
master door lock switch in the lock direction  
b, then pull and hold the outside door handle  
c. Close the door, then release the handle.  
Locking the passengers’ doors  
Push the lock tab forward and close the door.  
Lockout prevention system  
Models without keyless access system  
The doors and the tailgate cannot be locked when the key is in the ignition switch.  
Models with keyless access system  
The doors and the tailgate cannot be locked when the keyless remote is inside the  
vehicle.  
152  
18 FIT JAZZ-32T5A6100.book 153 ページ 2017年8月23日 水曜日 午前11時24分  
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Inside  
Locking/Unlocking the Doors from the Inside  
1Using the Lock Tab  
Using the Lock Tab  
When you lock/unlock the door using the lock tab on  
the driver's door, all the other doors and the tailgate  
lock/unlock at the same time.  
Locking a door  
Push the lock tab forward.  
To Lock  
Lock Tab  
Unlocking a door  
Pull the lock tab rearward.  
To Unlock  
Continued  
153  
18 FIT JAZZ-32T5A6100.book 154 ページ 2017年8月23日 水曜日 午前11時24分  
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Inside  
1Unlocking Using the Front Door Inner Handle  
Unlocking Using the Front Door Inner Handle  
The front door inner handles are designed to allow  
the front seat occupants to open the door in one  
motion.  
However, this feature requires that front seat  
occupants never pull a front door inner handle while  
the vehicle is in motion.  
Pull the front door inner handle.  
u The door unlocks and opens in one  
motion.  
Unlocking and opening the driver’s door from  
the inner handle unlocks all the other doors.  
Children should always ride in a rear seat where  
childproof door locks are provided.  
2 Childproof Door Locks P. 155  
Inner Handle  
1Using the Master Door Lock Switch  
Using the Master Door Lock Switch  
When you lock/unlock the driver's door using the  
master lock switch, all the other doors and the  
tailgate lock/unlock at the same time.  
Press the master door lock switch in as shown  
to lock or unlock all the doors and the tailgate.  
To Lock  
To Unlock  
Master Door  
Lock Switch  
154  
18 FIT JAZZ-32T5A6100.book 155 ページ 2017年8月23日 水曜日 午前11時24分  
uuLocking and Unlocking the DoorsuChildproof Door Locks  
Childproof Door Locks  
The childproof door locks prevent the rear doors from being opened from the inside  
regardless of the position of the lock tab.  
1Childproof Door Locks  
To open the door from the inside when the  
childproof door lock is on, put the lock tab in the  
unlock position, lower the rear window, put your  
hand out of the window, and pull the outside door  
handle.  
Setting the Childproof Door Locks  
Slide the lever in the rear door to the lock  
position, and close the door.  
Unlock  
When opening the door  
Open the door using the outside door handle.  
Lock  
155  
18 FIT JAZZ-32T5A6100.book 156 ページ 2017年8月23日 水曜日 午前11時24分  
Opening and Closing the Tailgate  
Precautions for Opening/Closing the Tailgate  
Always make sure individuals and objects are clear of the tailgate before opening or  
closing it.  
Open the tailgate all the way.  
1Precautions for Opening/Closing the Tailgate  
3
WARNING  
u If it is not fully opened, the tailgate may begin to close under its own weight.  
Be careful when it is windy. The wind may cause the tailgate to close.  
Anyone caught in the path of a tailgate  
that is being opened or closed can be  
seriously injured.  
Keep the tailgate closed while driving to:  
u Avoid possible damage.  
u Prevent exhaust gas from leaking into the vehicle.  
2 Carbon Monoxide Gas P. 82  
Make sure that all people are clear of the  
tailgate before opening or closing it.  
Be careful not to hit your head on the tailgate or to  
put your hands between the tailgate and the luggage  
area when closing the tailgate.  
When you are storing or picking up luggage from the  
luggage area while the engine is idling, do not stand  
in front of the exhaust pipe. You may get burned.  
Do not allow any passenger in the luggage space.  
They may get hurt during hard braking, a sudden  
acceleration, or a crash.  
156  
18 FIT JAZZ-32T5A6100.book 157 ページ 2017年8月23日 水曜日 午前11時24分  
uuOpening and Closing the TailgateuUsing the Tailgate Outer Handle/Release Button  
Using the Tailgate Outer Handle/Release Button  
Models with keyless access system  
1Using the Tailgate Outer Handle/Release Button  
When all the doors are unlocked, the tailgate  
is unlocked. Press the tailgate release button  
and lift open the tailgate.  
Models with keyless access system  
Do not leave the keyless remote in the vehicle  
when you get out. Carry it with you.  
Even if you are not carrying the remote, you can  
unlock the tailgate while someone else with the  
remote is within range.  
Tailgate  
Release  
Button  
If you are carrying the keyless remote, you do not  
have to unlock the tailgate before opening it.  
Models without keyless access system  
When all the doors are unlocked, the tailgate  
is unlocked.  
Pull up the tailgate outer handle and lift open  
the tailgate.  
Tailgate  
Outer  
Handle  
Continued  
157  
18 FIT JAZZ-32T5A6100.book 158 ページ 2017年8月23日 水曜日 午前11時24分  
uuOpening and Closing the TailgateuUsing the Tailgate Outer Handle/Release Button  
All models  
To close the tailgate, grab the inner handle,  
pull the tailgate down, and push it closed  
from outside.  
Inner  
Handle  
158  
18 FIT JAZZ-32T5A6100.book 159 ページ 2017年8月23日 水曜日 午前11時24分  
Security System  
Immobilizer System  
The immobilizer system prevents a key that has not been pre-registered from  
starting the engine. Each key contains electronic transmitters that use electronic  
signals to verify the key.  
1Immobilizer System  
NOTICE  
Leaving the key in the vehicle can result in theft or  
accidental movement of the vehicle.  
Always take the ignition key with you whenever you  
leave the vehicle unattended.  
Pay attention to the following when inserting the key into the ignition switch or  
pressing the ENGINE START/STOP button:  
Do not allow objects that emit strong radio waves near the ignition switch or the  
ENGINE START/STOP button.  
Make sure the key is not covered by or touching a metal object.  
Do not bring a key from another vehicle's immobilizer system near the ignition  
switch or the ENGINE START/STOP button.  
Do not alter the system or add other devices to it.  
Doing so may damage the system and make your  
vehicle inoperable.  
If the system repeatedly does not recognize the  
coding of your key, contact your dealer. If you have  
lost your key and cannot start your engine, contact  
your dealer.  
Do not put the key near magnetic items. Electronic device, such as televisions and  
audio systems emit strong magnetic fields. Note that even a key chain can become  
magnetic.  
Security System Alarm*  
The security system alarm activates when the doors, tailgate, or bonnet are opened  
without the remote transmitter or keyless access system*.  
*
1Security System Alarm  
Do not alter the system or add other devices to it.  
Doing so may damage the system and make your  
vehicle inoperable.  
When the security system alarm activates  
The horn sounds intermittently and some exterior lights flash.  
The security alarm continues for 30 seconds, then the  
system resets. If the cause of the alarm continues,  
alarming will repeat several times at about 5 second  
intervals.  
To deactivate the security system alarm  
Unlock the vehicle using the remote transmitter or keyless access system, or turn the  
ignition switch to ON (w*1. The system, along with the horn and flashing lights, is  
deactivated.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
* Not available on all models  
Continued  
159  
18 FIT JAZZ-32T5A6100.book 160 ページ 2017年8月23日 水曜日 午前11時24分  
*
uuSecurity SystemuSecurity System Alarm  
*
Setting the security system alarm  
The security system alarm automatically sets when the following conditions have  
been met:  
1Security System Alarm  
Do not set the security system alarm when someone  
is in the vehicle or a window is open. The system can  
accidentally activate when:  
The ignition switch is in LOCK (0*1.  
Unlocking the door with the lock tab.  
The bonnet is closed.  
Opening the bonnet with the bonnet release.  
All doors and the tailgate are locked from outside with the key, the remote  
transmitter, or keyless access system*.  
If the battery goes dead after you have set the  
security system alarm, the security alarm may go off  
once the battery is recharged or replaced.  
If this occurs, deactivate the security system alarm by  
unlocking a door using the remote transmitter or  
keyless access system*.  
Models without keyless access system  
The key has been removed from the ignition switch.  
When the security system alarm sets  
The security system alarm indicator in the instrument panel blinks. When the  
blinking interval changes after about 15 seconds, the security system alarm is set.  
Do not unlock the door using the key. The security  
system alarm goes off.  
To cancel the security system alarm  
The security system alarm is cancelled when the vehicle is unlocked using the remote  
transmitter, keyless access system* or the ignition switch is turned to ON (w*1. The  
security system alarm indicator goes off at the same time.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
* Not available on all models  
160  
18 FIT JAZZ-32T5A6100.book 161 ページ 2017年8月23日 水曜日 午前11時24分  
*
uuSecurity SystemuSuper Locking  
Super Locking*  
*
The super locking function disables the lock tabs on all doors.  
1Super Locking  
3
WARNING  
To activate the super locking function  
Turn the key in the driver’s door towards the vehicle front twice within five  
seconds.  
No one must be inside the vehicle with the  
super locking set. Persons locked in can get  
seriously sick or die from the heat built  
inside the vehicle if left in the sun.  
Press the lock button on the remote transmitter twice within five seconds.  
Models with keyless access system  
Press the door lock button on the door handle or the tailgate twice within five  
seconds.  
Make sure there is no one inside the vehicle  
before setting the super locking.  
To cancel the super locking function  
Unlock the driver’s door with the remote transmitter or keyless access system*.  
Do not unlock the door using the key. The security  
system alarm goes off.  
Even if you have unlocked, opened, and then closed  
the tailgate, the super locking function continues to  
be in effect.  
* Not available on all models  
161  
18 FIT JAZZ-32T5A6100.book 162 ページ 2017年8月23日 水曜日 午前11時24分  
Opening and Closing the Windows  
Opening/Closing the Power Windows  
The power windows can be opened and closed when the ignition switch is in ON  
(w*1, using the switches on the doors.  
1Opening/Closing the Power Windows  
3WARNING  
Closing a power window on someone's  
hands or fingers can cause serious injury.  
The driver's side switches can be used to open and close all of the windows.  
The power window lock button on the driver's side must be switched off (not  
pushed in, indicator off) to open and close the windows from anywhere other than  
the driver's seat.  
Make sure your passengers are away from  
the windows before closing them.  
When the power window lock button is pushed in, the indicator comes on and you  
can only operate the driver's window. Turn the power window lock button on if a  
child is in the vehicle.  
WARNING: Always take the ignition key with you  
whenever you leave the vehicle alone or with other  
occupants.  
Opening/Closing Windows with Auto-Open/Close Function  
The power windows can be operated for up to 10  
minutes after you turn the ignition switch to LOCK  
(0*1.  
Manual operation  
Driver’s  
Window  
Switch  
Power Window  
Lock Button  
To open: Push the switch down lightly, and  
hold it until the desired position is reached.  
To close: Pull the switch up lightly, and hold it  
until the desired position is reached.  
Opening either front door cancels this function.  
Auto Reverse  
If a power window senses resistance when closing  
automatically, it will stop closing and reverse direction.  
Indicator  
On  
Automatic operation  
To open: Push the switch down firmly.  
To close: Pull the switch up firmly.  
The driver’s window auto reverse function is disabled  
when you continuously pull up the switch.  
Off  
Front Passenger’s  
Window Switch  
(Auto Function*)  
The auto reverse function stops sensing when the  
window is almost closed to ensure that it fully closes.  
The window opens or closes completely. To  
stop the window at any time, push or pull the  
switch briefly.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
* Not available on all models  
162  
18 FIT JAZZ-32T5A6100.book 163 ページ 2017年8月23日 水曜日 午前11時24分  
uuOpening and Closing the WindowsuOpening/Closing the Power Windows  
Opening/Closing Windows without Auto-Open/Close  
Function  
To open: Push the switch down.  
To close: Pull the switch up.  
Close  
Release the switch when the window reaches  
the desired position.  
Open  
163  
18 FIT JAZZ-32T5A6100.book 164 ページ 2017年8月23日 水曜日 午前11時24分  
Operating the Switches Around the Steering Wheel  
Models without keyless access system  
Ignition Switch  
1Ignition Switch  
Manual transmission models  
3
WARNING  
(0 LOCK: Insert and remove the key in this  
position.  
Removing the key from the ignition switch  
while driving locks the steering. This can  
cause you to lose control of the vehicle.  
(q ACCESSORY: Operate the audio system and  
other accessories in this position.  
(w ON: This is the position when driving.  
Remove the key from the ignition switch  
only when parked.  
(e START: This position is for starting the engine.  
The switch returns to ON (w when you let go of  
the key.  
Continuously variable transmission models  
You cannot take the key out unless the shift lever is  
in (P.  
All models  
If you open the driver's door when the key is in LOCK  
(0 or ACCESSORY (q, the following symbol appears  
on the multi-information display:  
In LOCK (0: symbol  
In ACCESSORY (q: symbol  
If the key won’t turn from LOCK (0 to ACCESSORY  
(q, turn the key while moving the steering wheel left  
and right. The steering wheel will unlock, allowing  
the key to turn.  
164  
18 FIT JAZZ-32T5A6100.book 165 ページ 2017年8月23日 水曜日 午前11時24分  
uuOperating the Switches Around the Steering WheeluENGINE START/STOP Button  
Models with keyless access system  
ENGINE START/STOP Button  
1ENGINE START/STOP Button  
ENGINE START/STOP Button Operating Range  
You can start the engine when the keyless remote is  
inside the vehicle.  
Changing the Power Mode  
Continuously Variable Transmission  
VEHICLE OFF (LOCK)  
Manual Transmission  
Operating Range  
The button is off.  
The steering wheel is locked.  
The power to all electrical  
components is turned off.  
ACCESSORY  
The button blinks (in red).  
Operate the audio system and  
other accessories in this  
position.  
The engine may also run if the keyless remote is close  
to the door or window, even if it is outside the  
vehicle.  
ON mode:  
ON  
The button is on (in red), if the engine is running.  
The button blinks (in red).  
All electrical components can  
be used.  
If the battery of the keyless remote is getting low, the  
engine may not start when you push the ENGINE  
START/STOP button. If the engine does not start,  
refer to the following link.  
Without depressing  
the brake pedal  
Without depressing  
the clutch pedal  
2 If the Keyless Remote Battery is Weak  
P. 560  
Press the button.  
Press the button without the shift lever in (P.  
Shift to (P then press the button.  
Continued  
165  
18 FIT JAZZ-32T5A6100.book 166 ページ 2017年8月23日 水曜日 午前11時24分  
uuOperating the Switches Around the Steering WheeluENGINE START/STOP Button  
1ENGINE START/STOP Button  
Automatic Power Off  
If the power mode does not change from VEHICLE  
OFF to ACCESSORY, press the ENGINE START/STOP  
button while moving the steering wheel left and  
right. The steering wheel will unlock, allowing the  
mode to change.  
If you leave the vehicle for 30 to 60 minutes with the shift lever in (P*1 and the  
power mode in ACCESSORY, the vehicle automatically goes into the mode similar to  
VEHICLE OFF (LOCK) to avoid draining the battery.  
When in this mode:  
The steering wheel does not lock.  
You cannot lock or unlock doors with the remote transmitter or the keyless access  
system.  
Do not leave the power mode in ACCESSORY or ON  
when you get out.  
Press the ENGINE START/STOP button twice to switch the mode to VEHICLE OFF  
(LOCK).  
2 Changing the Power Mode P. 165  
*1: Continuously variable transmission models  
166  
18 FIT JAZZ-32T5A6100.book 167 ページ 2017年8月23日 水曜日 午前11時24分  
uuOperating the Switches Around the Steering WheeluENGINE START/STOP Button  
Power Mode Reminder  
If you open the driver’s door when the power mode is set to ACCESSORY, a warning  
beep sounds.  
1Keyless Remote Reminder  
Keyless Remote Reminder  
When the keyless remote is within the system’s  
operational range, and the driver’s door is closed, the  
warning function cancels.  
Warning buzzers may sound from inside and/  
or outside the vehicle to remind you that the  
keyless remote is out of the vehicle. If the  
buzzer continues even after the remote is put  
back inside, place it to be within its  
operational range.  
If the keyless remote is taken out of the vehicle after  
the engine has been started, you can no longer  
change the ENGINE START/STOP button mode or  
restart the engine. Always make sure if the remote is  
in your vehicle when you operate the ENGINE  
START/STOP button.  
When the power mode is in ON  
If the keyless remote is taken out of the  
vehicle, and the driver’s door is closed, a  
warning buzzer sound from both inside and  
outside the vehicle. A warning symbol on the  
multi-information display notifies the driver  
inside that the remote is outside of the  
vehicle.  
Removing the keyless remote from the vehicle  
through a window does not activate the warning  
buzzer.  
Do not put the keyless remote on the dashboard or in  
the glove box. It may cause the warning buzzer to go  
off. Under some other conditions that can prevent  
the vehicle from locating the remote, the warning  
buzzer may also go off even if the remote is within  
the system’s operational range.  
When the power mode is in  
ACCESSORY  
If the keyless remote is taken out of the  
vehicle, and all the doors are closed, a  
warning buzzer sounds from outside the  
vehicle.  
167  
18 FIT JAZZ-32T5A6100.book 168 ページ 2017年8月23日 水曜日 午前11時24分  
uuOperating the Switches Around the Steering WheeluIgnition Switch and Power Mode Comparison  
Ignition Switch and Power Mode Comparison  
Ignition Switch  
Position  
LOCK (0  
(with/without  
the key)  
ACCESSORY (q  
ON (w  
START (e  
Without Keyless  
Access System  
Engine is turned off and  
power is shut down.  
The steering wheel is  
locked.  
No electrical  
components can be  
used.  
Engine is turned off.  
Some electrical  
components such as the  
audio system and the  
accessory power socket  
can be operated.  
Normal key position  
while driving.  
All electrical components  
can be used.  
Use this position to start  
the engine.  
The ignition switch  
returns to ON (w  
position when you  
release the key.  
Power Mode  
VEHICLE OFF  
(LOCK)  
ACCESSORY  
ON  
START  
Button is: Blinking On  
With Keyless Access Button-Off  
Button-Blinking in red  
Button-Blinking in red  
(engine is turned off)  
On in red (engine is  
Button-On in red  
The mode automatically  
returns to ON after the  
engine starts.  
System and ENGINE  
START/STOP  
Button  
Engine is turned off and  
Engine is turned off.  
Some electrical  
power is shut down.  
The steering wheel is  
locked.  
components such as the running)  
audio system and the  
accessory power socket  
can be operated.  
All electrical components  
can be used.  
No electrical  
components can be  
used.  
168  
18 FIT JAZZ-32T5A6100.book 169 ページ 2017年8月23日 水曜日 午前11時24分  
uuOperating the Switches Around the Steering WheeluTurn Signals  
Turn Signals  
The turn signals can be used when the ignition  
switch is in ON (w*1.  
Right Turn  
One touch turn signal  
When you lightly push up or down and release  
the turn signal lever, the exterior turn signals  
and turn signal indicator blink three times.  
Left Turn  
This feature can be used when signalling for a  
lane change.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
169  
18 FIT JAZZ-32T5A6100.book 170 ページ 2017年8月23日 水曜日 午前11時24分  
uuOperating the Switches Around the Steering WheeluLight Switches  
Light Switches  
1Light Switches  
Manual Operation  
Models without keyless access system  
If you remove the key from the ignition switch while  
the lights are on, a chime sounds when the driver’s  
door is opened.  
Rotating the light switch turns the lights on  
and off, regardless of the position of the  
ignition switch*1.  
High Beams  
Models with keyless access system  
High beams  
Push the lever forward until you hear a click.  
Low beams  
If you leave the power mode in VEHICLE OFF (LOCK)  
while the lights are on, a chime sounds when the  
driver’s door is opened.  
When in high beams, pull the lever back to  
return to low beams.  
Flashing the high beams  
Pull the lever back, and release it.  
Lights off  
Flashing the high beams  
Low Beams  
When the lights are on, the lights on indicator in the  
instrument panel will be on.  
2 Lights On Indicator P. 98  
Turns on position, tail, and rear  
licence plate lights  
Turns on headlights, position,  
tail, and rear licence plate lights  
Do not leave the lights on when the engine is off  
because it will cause the battery to discharge.  
Turn the lever to OFF either when:  
The shift lever is in (P*2.  
The parking brake is applied.  
To turn the lights on again, turn the lever to  
OFF to cancel the lights off mode. Even if you  
do not cancel the lights off mode, the lights  
come on automatically when:  
The shift lever is moved out of (P*2.  
The parking brake is released.  
The vehicle starts to move.  
If you sense that the level of the headlights is  
abnormal, have your vehicle inspected by a dealer.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
*2: Continuously variable transmission models  
170  
18 FIT JAZZ-32T5A6100.book 171 ページ 2017年8月23日 水曜日 午前11時24分  
uuOperating the Switches Around the Steering WheeluLight Switches  
1Automatic Operation (automatic lighting control)  
Automatic Operation (automatic lighting control)  
We recommend that you turn on the lights manually  
when driving at night, in a dense fog, or in dark areas  
such as long tunnels or parking facilities.  
Automatic lighting control can be used when  
the ignition switch is in ON (w*1.  
When the light switch is in AUTO, the  
headlights and other exterior lights will switch  
on and off automatically depending on the  
ambient brightness.  
The light sensor is in the location shown below.  
Do not cover this light sensor with anything;  
otherwise, the automatic lighting system may not  
work properly.  
Models with front sensor camera  
Light Sensor  
The headlights comes on when you unlock a door in dark areas with the headlight  
switch in AUTO.  
u Once you lock the door, the headlights will go off.  
Automatic Lighting Off Feature  
The headlights, all other exterior lights, and the instrument panel lights turn off 15  
seconds after you remove the key or set the power mode to VEHICLE OFF (LOCK),  
take the remote with you, and close the driver’s door.  
Models without front sensor camera  
Light Sensor  
However, when the switch is in  
, the position lights remain on.  
If you turn the ignition switch to LOCK (0*1 with the headlight switch on, but do  
not open the door, the lights turn off after 10 minutes (3 minutes, if the switch is in  
the AUTO position).  
The lights turn on again when you unlock or open the driver’s door. If you unlock  
the door, but do not open it within 15 seconds, the lights go off. If you open the  
driver’s door, you will hear a lights on reminder chime.  
1Automatic Lighting Off Feature  
You can change the headlight auto off timer setting.  
2 Customized Features P. 131  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.  
171  
18 FIT JAZZ-32T5A6100.book 172 ページ 2017年8月23日 水曜日 午前11時24分  
uuOperating the Switches Around the Steering WheeluFog Lights  
Fog Lights  
Front fog lights*  
Can be used when the position lights or the headlights are on.  
Rear fog light  
Can be used when the headlights or the front fog lights are on.  
Front and Rear Fog Lights Switch*  
To turn the front fog lights on  
Rotate the switch up from the OFF position to  
the  
position. The  
indicator comes on.  
To turn the front and rear fog lights on  
Rotate the switch one position up from the  
position. The  
and  
indicator comes on.  
Front and Rear  
Fog Lights Switch  
To turn the rear fog light on  
Rotate the switch down from the OFF  
position. The  
indicator comes on.  
* Not available on all models  
172  
18 FIT JAZZ-32T5A6100.book 173 ページ 2017年8月23日 水曜日 午前11時24分  
uuOperating the Switches Around the Steering WheeluFog Lights  
Rear Fog Lights*  
To turn the rear fog light on  
Rotate the switch to . The  
comes on.  
indicator  
Rear Fog Light Switch  
* Not available on all models  
173  
18 FIT JAZZ-32T5A6100.book 174 ページ 2017年8月23日 水曜日 午前11時24分  
*
uuOperating the Switches Around the Steering WheeluHeadlight Adjuster  
Headlight Adjuster*  
*
You can adjust the vertical angle of the low  
beam headlights when the ignition switch is in  
ON (w*1.  
1Headlight Adjuster  
Models with LED low beam headlights  
Your vehicle is equipped with the automatic  
headlight adjusting system that automatically adjusts  
the vertical angle of the low beam headlights. If you  
find a significant change in the vertical angle of the  
headlights, there may be a problem with the system.  
Have your vehicle checked by a dealer.  
Turn the adjusting dial to select an  
appropriate angle of the headlights.  
The larger dial number indicates the lower  
angle.  
You may need to alter the headlight beam  
distribution.  
2 Adjusting Headlight Distribution P. 451  
To select the adjusting dial position  
Refer to the below table for the appropriate dial position for your vehicle's riding  
and loading conditions.  
Condition  
Dial position  
A driver  
A driver and a front passenger  
0
1
Five persons in the front and rear seats  
Five persons in the front and rear seats and luggage in  
the luggage area, within the limit of maximum  
permissible axle weight and maximum permissible  
vehicle weight  
A driver and luggage in the luggage area, within the  
limits of maximum permissible axle weight and  
maximum permissible vehicle weight  
2
3
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
* Not available on all models  
174  
18 FIT JAZZ-32T5A6100.book 175 ページ 2017年8月23日 水曜日 午前11時24分  
*
uuOperating the Switches Around the Steering WheeluAuto High-Beam (High Beam Support System)  
Auto High-Beam (High Beam Support System)*  
*
Using a camera mounted to the inside of the windshield, this system detects light  
sources ahead of the vehicle. Depending on the light source, the system  
automatically switches the headlights to high beam for optimal visibility at night.  
1Auto High-Beam (High Beam Support System)  
The auto high-beam determines when to change the  
headlight beams by responding to the brightness of  
the lights ahead of your vehicle. In the following  
cases, the system may not respond to the lights  
properly:  
The system operates when:  
The headlight switch is in AUTO.  
The brightness of the lights from the preceding or  
oncoming vehicle is intense or poor.  
Visibility is poor due to the weather (rain, snow,  
fog, windscreen frost, etc.).  
The lever is in the low beam position.  
The low beams are on and the system  
recognizes that you are driving at night.  
The vehicle speed is above 40 km/h (25 mph).  
Other light sources, such as streetlights and electric  
billboards are illuminating the road ahead.  
The brightness level of the road ahead constantly  
changes.  
The road is bumpy or with many curves.  
A vehicle cuts in front of you, or a vehicle in front  
of you is not in the preceding or oncoming  
direction.  
How it works  
When the camera detects lights coming from a preceding or oncoming vehicle, the  
headlights remain in low beam.  
Your vehicle is tilted with a heavy load in the rear.  
When the camera detects no lights coming from a preceding or oncoming vehicle,  
the headlights change to high beam.  
If you find the timing of beam changes inconvenient  
for driving, change the headlight beams manually.  
The view angle or distance that the camera can detect lights ahead differs  
depending on conditions, such as the brightness of the lights and the weather.  
If you do not want the system to be activated at any  
time when the headlight switch is in AUTO, consult a  
dealer.  
* Not available on all models  
Continued  
175  
18 FIT JAZZ-32T5A6100.book 176 ページ 2017年8月23日 水曜日 午前11時24分  
*
uuOperating the Switches Around the Steering WheeluAuto High-Beam (High Beam Support System)  
1Operating the System  
Operating the System  
For the auto high-beam to work properly:  
Do not place an object that reflects light on the  
dashboard.  
Keep the windscreen around the camera clean.  
When cleaning the windscreen, be careful not to  
apply the windscreen cleanser to the camera lens.  
Do not attach an object, sticker or film to the area  
around the camera.  
To activate the system, turn the headlight  
switch to AUTO and then set the headlights  
to low beam. The auto high-beam indicator  
will come on.  
2 Light Switches P. 170  
Do not touch the camera lens.  
If the camera receives a strong impact, or repairing of  
the area near the camera is required, consult a dealer.  
Headlight Switch  
To help reduce the likelihood that high interior  
temperatures will cause the camera system to shut  
off, when parking, find a shady area or face the front  
of the vehicle away from the sun.  
If you use a reflective sun shade, do not allow it to  
cover the camera housing. Covering the camera can  
concentrate heat on the camera.  
The high beams remain on unless:  
You have been driving below 24km/h (15mph) for an extended amount of time.  
The speed of the vehicle drops below 10km/h (6mph).  
The windshield wipers have been running at a high speed for more than a few  
seconds.  
You enter a well lit location.  
If the  
message appears:  
The high beams come back on once the condition that caused them to turn off no  
longer exists.  
Use the heating and cooling system*/climate  
control system* to cool down the interior and, if  
necessary, also use defroster mode with the air  
flow directed towards the camera.  
Start driving the vehicle to lower the windscreen  
temperature, which cools down the area around  
the camera.  
* Not available on all models  
176  
18 FIT JAZZ-32T5A6100.book 177 ページ 2017年8月23日 水曜日 午前11時24分  
*
uuOperating the Switches Around the Steering WheeluAuto High-Beam (High Beam Support System)  
If needed, you can temporarily turn the high beams off manually. Turn on the high  
beams by pushing the lever forward until you hear a click, or flash the high beams  
once by pulling the lever toward you. To turn the high beams back on, repeat one  
of the procedures.  
If you want the auto high-beam operation to resume at once, pull and hold the lever  
towards you for a few seconds.  
1Operating the System  
If the  
message appears:  
Park your vehicle in a safe place, and clean the  
windscreen. If the message does not disappear  
after you have cleaned the windscreen and driven  
for a while, have your vehicle checked by a dealer.  
177  
18 FIT JAZZ-32T5A6100.book 178 ページ 2017年8月23日 水曜日 午前11時24分  
uuOperating the Switches Around the Steering WheeluDaytime Running Lights  
Daytime Running Lights  
The position*/daytime running lights come on when the following conditions have  
been met:  
The ignition switch is in ON (w*1.  
The headlight switch is in AUTO.  
Turning off the ignition switch or setting the power mode to VEHICLE OFF will turn  
off the daytime running lights.  
The daytime running lights are off once the headlight switch is turned on, or when  
the head light switch is in AUTO and it is getting darker outside.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
* Not available on all models  
178  
18 FIT JAZZ-32T5A6100.book 179 ページ 2017年8月23日 水曜日 午前11時24分  
uuOperating the Switches Around the Steering WheeluWipers and Washers  
Wipers and Washers  
The windscreen wipers and washers can be  
1Wipers and Washers  
used when the ignition switch is in ON (w*1.  
NOTICE  
Do not use the wipers when the windscreen is dry.  
The windscreen will get scratched, or the rubber  
blades will get damaged.  
MIST  
The wipers run at high speed until you release  
the lever.  
Pull to use  
washer.  
Turn the washers off if no washer fluid comes out.  
The pump may get damaged.  
Wiper switch (OFF, AUTO, LO, HI)  
Change the wiper switch setting according to  
the amount of rain.  
The wiper motor may stop motor operation  
temporarily to prevent an overload. Wiper operation  
will return to normal within a few minutes, once the  
circuit has returned to normal.  
MIST  
OFF  
2 Automatic Intermittent Wipers P. 180  
Washer  
AUTO: Automatic  
intermittent operation  
LO: Low speed wipe  
Sprays while you pull the lever toward you.  
When you release the lever for more than one  
second, the spray stops, the wipers sweep two  
or three more times to clear the windscreen,  
then stop.  
NOTICE  
In cold weather, the blades may freeze to the  
windscreen, becoming stuck.  
Operating the wipers in this condition may damage  
the wipers. Use the demister to warm the  
windscreen, then turn the wipers on.  
HI: High speed wipe  
If the wipers stop operating due to any obstacle such  
as the build-up of snow, park the vehicle in a safe  
place.  
Rotate the wiper switch to OFF, and turn the ignition  
switch to ACCESSORY (q or LOCK (0*1, then  
remove the obstacle.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
Continued  
179  
18 FIT JAZZ-32T5A6100.book 180 ページ 2017年8月23日 水曜日 午前11時24分  
uuOperating the Switches Around the Steering WheeluWipers and Washers  
1Automatic Intermittent Wipers  
Automatic Intermittent Wipers  
The rainfall sensor is in the location shown below.  
When you push the lever down to AUTO, the  
windscreen wipers sweep once, and go into  
the automatic mode.  
Rainfall Sensor  
The wipers operate intermittently, at low  
speed, or at high speed and stops in  
accordance with the amount of rainfall the  
rainfall sensor detects.  
Adjustment Ring  
AUTO sensitivity adjustment  
When the wiper function is set to AUTO, you  
can adjust the sensitivity of the rain fall sensor  
(using the adjustment ring) so that wipers will  
operate in accordance with your preference.  
AUTO should always be turned OFF before the  
following situation in order to prevent severe damage  
to the wiper system:  
Cleaning the windshield  
Driving through a car wash  
No rain present  
Sensor sensitivity  
Low sensitivity  
High sensitivity  
180  
18 FIT JAZZ-32T5A6100.book 181 ページ 2017年8月23日 水曜日 午前11時24分  
uuOperating the Switches Around the Steering WheeluWipers and Washers  
Rear Wiper/Washer  
The rear wiper and washer can be used when  
the ignition switch is in ON (w*1.  
Wiper switch (OFF, INT, ON)  
Change the wiper switch setting according to  
the amount of rain.  
Washer (  
)
Sprays while you rotate the switch to this  
position.  
Hold it to activate the wiper and to spray the  
washer. Once released, it stops operating  
after a few more sweeps.  
INT: Intermittent  
ON  
OFF  
Washer  
Operating in reverse  
When you shift the transmission to (R with the windscreen wipers activated, the  
rear wiper operates automatically as follows even if its switch is off.  
Front Wiper Position  
Rear Wiper Operation  
AUTO (Intermittent)  
Intermittent  
LO (Low speed wipe)  
HI (High speed wipe)  
Continuous  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
181  
18 FIT JAZZ-32T5A6100.book 182 ページ 2017年8月23日 水曜日 午前11時24分  
uuOperating the Switches Around the Steering WheeluBrightness Control  
Brightness Control  
When the ignition switch is in ON (w*1, you  
1Brightness Control  
can use the  
instrument panel brightness.  
Brighten: Turn the knob to the right.  
Dim: Turn the knob to the left.  
(Select/Reset) knob to adjust  
Instrument panel brightness varies, depending on  
whether the exterior lights are on or off. The  
instrument panel dims to reduce glare when they are  
on.  
To cancels the reduced instrument panel brightness  
when the exterior lights are on, turn the knob to the  
right until the brightness display is up to max, the  
beeper sounds.  
You will hear a beeper when the brightness  
reaches minimum or maximum. Several  
seconds after you have adjusted the  
brightness, you will be returned to the  
previous screen.  
(Select/Reset) Knob  
The brightness can be set differently for when the  
exterior lights are on, and when they are off.  
Brightness level indicator  
The brightness level is shown on the multi-  
information display while you are adjusting it.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
182  
18 FIT JAZZ-32T5A6100.book 183 ページ 2017年8月23日 水曜日 午前11時24分  
*
uuOperating the Switches Around the Steering WheeluRear Demister/Heated Door Mirror  
Rear Demister/Heated Door Mirror*  
*
Press the rear demister and heated door mirror button or touch the icon to defog  
the rear window and mirrors when the ignition switch is in ON (w*1.  
1Rear Demister/Heated Door Mirror  
NOTICE  
When cleaning the inside of the rear window, be  
careful not to damage the heating wires.  
It is critical to wipe the window from side to side  
along the demister heating wires.  
Models with heating and cooling system  
This system consumes a lot of power, so turn it off  
when the window has been demisted or deiced.  
Also, do not use the system for a long period when  
the engine is idling. This may weaken the battery,  
making it difficult to start the engine.  
Models with climate control system  
Models with climate control system  
The rear demister and heated door mirrors  
automatically switch off after 10-30 minutes  
depending on the outside temperature.  
However, if the outside temperature is 0°C or  
below, they do not automatically switch off.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
* Not available on all models  
183  
18 FIT JAZZ-32T5A6100.book 184 ページ 2017年8月23日 水曜日 午前11時24分  
uuOperating the Switches Around the Steering WheeluAdjusting the Steering Wheel  
Adjusting the Steering Wheel  
The steering wheel height and distance from your body can be adjusted so that you  
can comfortably grip the steering wheel in an appropriate driving posture.  
1. Pull the steering wheel adjustment lever up.  
1Adjusting the Steering Wheel  
3
WARNING  
u The steering wheel adjustment lever is  
Adjusting the steering wheel position while  
driving may cause you to lose control of the  
vehicle and be seriously injured in a crash.  
To adjust  
under the steering column.  
2. Move the steering wheel up or down, and  
in or out.  
Adjust the steering wheel only when the  
vehicle is stopped.  
To lock  
u Make sure you can see the instrument  
panel gauges and indicators.  
Lever  
Height and Distance  
3. Push the steering wheel adjustment lever  
down to lock the steering wheel in position.  
u After adjusting the position, make sure  
you have securely locked the steering  
wheel in place by trying to move it up,  
down, in, and out.  
184  
18 FIT JAZZ-32T5A6100.book 185 ページ 2017年8月23日 水曜日 午前11時24分  
Adjusting the Mirrors  
Interior Rearview Mirror  
Adjust the angle of the rearview mirror when you are sitting in the correct driving  
position.  
1Adjusting the Mirrors  
Keep the inside and outside mirrors clean and  
adjusted for best visibility.  
Rearview Mirror with Day and Night Positions  
Adjust the mirrors before you start driving.  
2 Front Seats P. 187  
Flip the tab to switch the position.  
Tab  
The night position will help to reduce the glare  
from headlights behind you when driving  
after dark.  
Daytime  
Position  
Night  
Position  
185  
18 FIT JAZZ-32T5A6100.book 186 ページ 2017年8月23日 水曜日 午前11時24分  
uuAdjusting the MirrorsuPower Door Mirrors  
Power Door Mirrors  
You can adjust the door mirrors when the  
ignition switch is in ON (w*1.  
Mirror position adjustment  
L/R selector switch: Select the left or right  
mirror. After adjusting the mirror, return the  
switch to the centre position.  
Mirror position adjustment switch: Press  
the switch left, right, up, or down to move the  
mirror.  
Selector Switch  
Adjustment Switch  
Folding Button*  
Folding door mirrors*  
Press the folding button to fold in and out the  
door mirrors.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
* Not available on all models  
186  
18 FIT JAZZ-32T5A6100.book 187 ページ 2017年8月23日 水曜日 午前11時24分  
Adjusting the Seats  
Front Seats  
Adjust the driver's seat as far back as possible  
while allowing you to maintain full control of  
the vehicle. You should be able to sit upright,  
well back in the seat and be able to  
adequately press the pedals without leaning  
forward, and grip the steering wheel  
comfortably. The passenger's seat should be  
adjusted in a similar manner, so that it is as far  
back from the front airbag in the dashboard  
1Adjusting the Seats  
Allow sufficient  
space.  
3
WARNING  
Sitting too close to a front airbag can result  
in serious injury or death if the front  
airbags inflate.  
Always sit as far back from the front  
airbags as possible while maintaining  
control of the vehicle.  
Move back.  
as possible.  
Adjusting the Seat Position  
In addition to the seat adjustment, you can adjust the  
steering wheel up and down, in and out. Allow at  
least 25 cm (10 inches) between the centre of the  
steering wheel and the chest.  
Horizontal Position Adjustment  
Pull up on the bar to move the seat,  
then release the bar.  
Always make seat adjustments before driving.  
Once a seat is adjusted correctly, rock it back and  
forth to make sure it is locked in position.  
Height Adjustment*  
Pull up or push down  
the lever to raise or  
lower the seat.  
Seat-back Angle  
Adjustment  
Pull up the lever to  
change the angle.  
Driver’s seat is shown.  
* Not available on all models  
Continued  
187  
18 FIT JAZZ-32T5A6100.book 188 ページ 2017年8月23日 水曜日 午前11時24分  
uuAdjusting the SeatsuFront Seats  
1Adjusting the Seat-Backs  
Adjusting the Seat-Backs  
Adjust the driver's seat-back to a comfortable,  
upright position, leaving ample space  
between your chest and the airbag cover in  
the centre of the steering wheel.  
3WARNING  
Reclining the seat-back too far can result in  
serious injury or death in a crash.  
Adjust the seat-back to an upright position,  
and sit well back in the seat.  
The front seat passenger should also adjust  
their seat-back to a comfortable, upright  
position.  
Do not put a cushion, or other object, between the  
seat-back and your back.  
Reclining a seat-back so that the shoulder part of the belt no longer rests against the  
occupant's chest reduces the protective capability of the belt. It also increases the  
chance of sliding under the belt in a crash and being seriously injured. The farther a  
seat-back is reclined, the greater the risk of injury.  
Doing so may interfere with proper seat belt or airbag  
operation.  
If you cannot get far enough away from the steering  
wheel and still reach the controls, we recommend  
that you investigate whether some type of adaptive  
equipment may help.  
188  
18 FIT JAZZ-32T5A6100.book 189 ページ 2017年8月23日 水曜日 午前11時24分  
uuAdjusting the SeatsuFront Seats  
1Reclining the Front Seats  
Reclining the Front Seats  
Both front seats must be returned to their normal  
upright position, and the head restraints reinstalled  
and properly adjusted before driving.  
2 Removing and Reinstalling the Head  
Restraints P. 196  
Reclining the seat-backs on the front seats until they are level with the rear seat  
cushions provides a large cushioned area that can (and should only) be used when  
the vehicle is safely parked.  
1. Remove the front head restraints while  
pushing the release button.  
u Store the head restraints in the luggage  
area.  
2. Adjust the front seats forward as far as  
possible.  
3. While pulling the seat-back angle  
adjustment lever, pivot the seat-back  
backward until it is level with the rear seat  
cushion.  
4. Move the front seat backward until it  
touches the rear seat.  
5. Unlatch the detachable anchor from the  
anchor buckle, and store the rear centre  
seat belt.  
2 Seat Belt with Detachable Anchor P. 45  
6. Adjust the rear seat-back to the desired  
position.  
To return the front seats and rear centre seat  
belt to their original positions, reverse this  
procedure.  
When you return a seat-back to its upright  
position, hold the seat-back to keep it from  
going up too quickly.  
189  
18 FIT JAZZ-32T5A6100.book 190 ページ 2017年8月23日 水曜日 午前11時24分  
uuAdjusting the SeatsuRear Seats  
Rear Seats  
Adjusting the Rear Seat-Backs  
Pull the lever on the right to change the angle  
of the right half of the seat-back, and left for  
the left half.  
190  
18 FIT JAZZ-32T5A6100.book 191 ページ 2017年8月23日 水曜日 午前11時24分  
uuAdjusting the SeatsuRear Seats  
1Folding Down the Rear Seats  
Folding Down the Rear Seats  
Make sure all items in the luggage area or items  
extending to the rear seats are properly  
secured. Loose items can fly forward if you have  
to brake hard.  
The rear seats can be folded down separately to allow for additional storage space.  
To fold down the seat  
1. Store the centre seat belt first. Insert the  
latch plate into the slot on the side of the  
anchor buckle.  
2. Retract the seat belt into the holder on the  
ceiling.  
Remove any items from the rear seat cushion and  
floor before you fold down the rear seat.  
To lock the seat-back upright, push it backwards until  
it locks.  
2 Seat Belt with Detachable Anchor P. 45  
Anchor  
Buckle  
3. Lower the head restraint to its lowest  
position.  
Latch Plate  
Make sure the seat-back, head restraints and seat  
cushion are securely latched back into place before  
driving. Also, make sure all rear shoulder belts are  
positioned in front of the seat-back, and the centre  
shoulder belt is re-positioned in the holding slot.  
4. Pull the release lever and fold down the  
seat-back.  
To return the seat to the original position, pull  
up the seat-back in the upright position.  
Release Lever  
Continued  
191  
18 FIT JAZZ-32T5A6100.book 192 ページ 2017年8月23日 水曜日 午前11時24分  
uuAdjusting the SeatsuRear Seats  
1Folding the Rear Seat Up  
Folding the Rear Seat Up  
After you fold the seat up, or put it back in the  
original position, make sure the seat is firmly secured  
by rocking it forward and back.  
Separately lift up the left and right rear seat  
cushions to make room for luggage area.  
Loop  
Check if there are any items on the seat before you  
pull the seat cushion up. Check if there are any  
obstacles around the floor guide before you put the  
seat back in the original position.  
Lifting up the seat cushion  
1. Make sure the seat belt buckles are in their  
loops on the seat.  
2. Pull up the rear seat cushion.  
3. Fold the seat leg down while pushing the  
seat cushion firmly against the seat-back to  
lock it.  
Seat Leg  
Putting the seat in the original position  
1. Hold the seat cushion in the upright  
position, and pull up the seat leg fully.  
u The seat cushion can abruptly fall down  
once you pull up the seat leg.  
Seat Leg  
Latch  
2. Slowly put down the seat cushion and set  
the seat leg in the floor guide.  
u A latch comes out when the leg is set  
properly.  
Floor Guide  
192  
18 FIT JAZZ-32T5A6100.book 193 ページ 2017年8月23日 水曜日 午前11時24分  
uuAdjusting the SeatsuHead Restraints  
Head Restraints  
Your vehicle is equipped with head restraints in all seating positions.  
1Adjusting the front head restraint positions  
3
WARNING  
Adjusting the front head restraint positions  
Improperly positioning head restraints  
reduces their effectiveness and increases  
the likelihood of serious injury in a crash.  
Head restraints are most effective for  
protection against whiplash and other rear-  
impact crash injuries when the centre of the  
back of the occupant’s head rests against the  
centre of the restraint. The tops of the  
occupant’s ears should be level with the  
centre height of the restraint.  
Make sure head restraints are in place and  
positioned properly before driving.  
In order for the head restraint system to work  
properly:  
Position head in the centre  
of the head restraint.  
The front head restraints can also be tilted to  
adjust its position properly.  
Do not hang any items on the head restraints, or  
from the restraint legs.  
Do not place any object between an occupant and  
the seat-back.  
Install each restraint in its proper location.  
Continued  
193  
18 FIT JAZZ-32T5A6100.book 194 ページ 2017年8月23日 水曜日 午前11時24分  
uuAdjusting the SeatsuHead Restraints  
To raise the head restraint:  
Pull it upward.  
To lower the head restraint:  
Push it down while pressing the release  
button.  
To tilt the head restraint: Pivot it while  
pressing the release button.  
Release  
Button  
194  
18 FIT JAZZ-32T5A6100.book 195 ページ 2017年8月23日 水曜日 午前11時24分  
uuAdjusting the SeatsuHead Restraints  
1Changing the Rear Seat Head Restraint Positions  
Changing the Rear Seat Head Restraint Positions  
When you use the head restraint in a rear seating  
position, pull up the head restraint to its highest  
position. Do not use it in any lower position.  
A passenger sitting in a back seating position  
should adjust the height of their head restraint  
to an appropriate position before the vehicle  
begins moving.  
To raise the head restraint:  
Pull it upward.  
Release  
Button  
To lower the head restraint:  
Push it down while pressing the release  
button.  
Outer  
Release  
Button  
Centre  
Continued  
195  
18 FIT JAZZ-32T5A6100.book 196 ページ 2017年8月23日 水曜日 午前11時24分  
uuAdjusting the SeatsuHead Restraints  
1Removing and Reinstalling the Head Restraints  
Removing and Reinstalling the Head Restraints  
Head restraints can be removed for cleaning or repair.  
3
WARNING  
Failure to reinstall, or correctly reinstall, the  
head restraints can result in severe injury  
during a crash.  
To remove a head restraint:  
Pull the restraint up as far as it will go. Then push the release button, and pull the  
restraint up and out.  
Always replace the head restraints before  
driving.  
To reinstall a head restraint:  
Insert the legs back in place, then adjust the head restraint to an appropriate height  
while pressing the release button. Pull up on the restraint to make sure it is locked  
in position.  
196  
18 FIT JAZZ-32T5A6100.book 197 ページ 2017年8月23日 水曜日 午前11時24分  
uuAdjusting the SeatsuMaintain a Proper Sitting Position  
Maintain a Proper Sitting Position  
1Maintain a Proper Sitting Position  
After all occupants have adjusted their seats and head restraints, and put on their  
seat belts, it is very important that they continue to sit upright, well back in their  
seats, with their feet on the floor, until the vehicle is safely parked and the engine is  
off.  
3WARNING  
Sitting improperly or out of position can  
result in serious injury or death in a crash.  
Sitting improperly can increase the chance of injury during a crash. For example, if  
an occupant slouches, lies down, turns sideways, sits forward, leans forward or  
sideways, or puts one or both feet up, the chance of injury during a crash is greatly  
increased.  
Always sit upright, well back in the seat,  
with your feet on the floor.  
In addition, an occupant who is out of position in the front seat can be seriously or  
fatally injured in a crash by striking interior parts of the vehicle or being struck by an  
inflating front airbag.  
197  
18 FIT JAZZ-32T5A6100.book 198 ページ 2017年8月23日 水曜日 午前11時24分  
*
uuAdjusting the SeatsuArmrest  
Armrest*  
Using the Front Seat Armrest  
The console lid can be used as an armrest.  
* Not available on all models  
198  
18 FIT JAZZ-32T5A6100.book 199 ページ 2017年8月23日 水曜日 午前11時24分  
Interior Lights/Interior Convenience Items  
Interior Lights  
1Interior Light Switch  
Interior Light Switch  
In the door activated position, the interior light fades  
out and goes off about 30 seconds after the doors  
are closed.  
The light goes off after 30 seconds in the following  
situations:  
ON  
Door Activated Position  
On  
The interior light comes on regardless of  
whether the doors are open or closed.  
Door activated  
Off  
When you unlock the driver's door but do not open it.  
The interior light comes on in the following  
situations:  
When any doors are opened.  
You unlock the driver's door.  
Models without keyless access system  
When you remove the key from the ignition switch  
but do not open a door.  
Models with keyless access system  
Models without keyless access system  
You remove the key from the ignition  
switch.  
When you set the power mode to VEHICLE OFF  
(LOCK) but do not open a door.  
The interior light goes off immediately in the  
following situations:  
When you lock the driver's door.  
When you turn the ignition switch to ON (w*1.  
Models with keyless access system  
When the power mode is set to VEHICLE  
OFF (LOCK).  
Models without keyless access system  
When you close the driver's door with the key in  
the ignition switch.  
OFF  
The interior light remains off regardless of  
whether the doors are open or closed.  
Models with keyless access system  
When you close the driver's door in ACCESSORY  
mode.  
If you leave any of the doors open in VEHICLE OFF  
(LOCK) mode, or without the key in the ignition  
switch, the interior light goes off after about 15  
minutes.  
*1: Models with the keyless access system have an ENGINE  
START/STOP button instead of an ignition switch.  
Continued  
199  
18 FIT JAZZ-32T5A6100.book 200 ページ 2017年8月23日 水曜日 午前11時24分  
uuInterior Lights/Interior Convenience ItemsuInterior Lights  
Map Lights  
The map lights can be turned on and off by  
pressing the lenses.  
Models with display audio system  
Models with colour audio system  
200  
18 FIT JAZZ-32T5A6100.book 201 ページ 2017年8月23日 水曜日 午前11時24分  
uuInterior Lights/Interior Convenience ItemsuInterior Lights  
Luggage Area Light  
The light comes on when you open the  
tailgate, and goes off when closed.  
201  
18 FIT JAZZ-32T5A6100.book 202 ページ 2017年8月23日 水曜日 午前11時24分  
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items  
Interior Convenience Items  
1Glove Box  
Glove Box  
Pull the handle to open the glove box.  
3
WARNING  
An open glove box can cause serious injury  
to your passenger in a crash, even if the  
passenger is wearing the seat belt.  
Always keep the glove box closed while  
driving.  
Console Compartment*  
Pull the handle to open the console  
compartment.  
* Not available on all models  
202  
18 FIT JAZZ-32T5A6100.book 203 ページ 2017年8月23日 水曜日 午前11時24分  
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items  
1Beverage Holders  
Beverage Holders  
NOTICE  
Front seat beverage holders  
Pull the lid backward to use the front panel  
beverage holder.  
Spilled liquids damage the upholstery, carpeting, and  
electrical components in the interior.  
Be careful when you are using the beverage holders.  
Hot liquid can scald you.  
The beverage holder is at the front of each  
door.  
Front Door  
Continued  
203  
18 FIT JAZZ-32T5A6100.book 204 ページ 2017年8月23日 水曜日 午前11時24分  
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items  
Rear seat beverage holders  
Models without centre console box  
The beverage holder is at the front of each  
door.  
Rear Door  
Luggage Floor Box  
Pull up the luggage area floor lid.  
Floor  
Lid  
Luggage Floor Box  
204  
18 FIT JAZZ-32T5A6100.book 205 ページ 2017年8月23日 水曜日 午前11時24分  
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items  
1Accessory Power Socket(s)  
Accessory Power Socket(s)  
NOTICE  
The accessory power socket can be used when the ignition switch must be in  
ACCESSORY (q or ON (w*1.  
Do not insert an automotive type cigarette lighter  
element.  
This can overheat the power socket.  
Accessory power socket (console panel)  
Open the cover to use it.  
The accessory power socket is designed to supply  
power for 12-volt DC accessories that are rated 180  
watts (15 amps) or less.  
To prevent battery drain, only use the power socket  
with the engine running.  
Accessory power socket (console  
compartment)*  
Cover  
Open the console lid and the cover to use it.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
* Not available on all models  
Continued  
205  
18 FIT JAZZ-32T5A6100.book 206 ページ 2017年8月23日 水曜日 午前11時24分  
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items  
1Coat Hook  
Coat Hook  
The coat hook is not designed for large or heavy  
items.  
There is a coat hook on the rear driver’s side  
grab handle. Pull it down to use it.  
Tie-down Anchors  
The tie-down anchors on the luggage area  
floor can be used to install a net for securing  
items.  
Front  
Anchors  
Rear Anchors  
206  
18 FIT JAZZ-32T5A6100.book 207 ページ 2017年8月23日 水曜日 午前11時24分  
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items  
1Luggage Area Cover  
Luggage Area Cover  
Do not place items on the luggage area cover, or  
stack objects higher than the top of the back seat.  
They could block your view and be thrown around  
the vehicle during a crush or sudden stop.  
The luggage area cover may be removed to give you more luggage room.  
To remove the luggage area cover  
1. Open the tailgate.  
Do not apply excessive pressure to the cover, such as  
leaning on it to retrieve an item.  
2. Remove the strap on each side of the  
tailgate.  
3. Disengage the support rods, then remove  
the luggage area cover.  
Reverse this procedure to install the luggage  
area cover.  
After reinstalling the luggage area cover,  
make sure it is latched securely.  
Continued  
207  
18 FIT JAZZ-32T5A6100.book 208 ページ 2017年8月23日 水曜日 午前11時24分  
uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items  
*
1Seat Heaters  
Seat Heaters*  
The ignition switch must be in ON (w*1 to use  
the seat heaters. The HI setting heats the seats  
faster than the LO setting.  
3WARNING  
Heat induced burns are possible when  
using seat heaters.  
Persons with a diminished ability to sense  
temperature (e.g., persons with diabetes,  
lower-limb nerve damage, or paralysis) or  
with sensitive skin should not use seat  
heaters.  
While in HI, the heater cycles on and off.  
u The appropriate indicator will be on  
while the seat heater is on. Briefly press  
the switch on the opposite side to turn  
the heater off. The indicator will be off.  
When a comfortable temperature is  
reached, select LO to keep the seat  
warm.  
Do not use the seat heaters even in LO when the  
engine is off. Under such conditions, the battery may  
be weakened, making the engine difficult to start.  
In the LO setting, the heater runs continuously and  
does not automatically turn off.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
* Not available on all models  
208  
18 FIT JAZZ-32T5A6100.book 209 ページ 2017年8月23日 水曜日 午前11時24分  
Heating and Cooling System*  
Using Vents, Heating and A/C  
Dashboard  
vents  
Floor and  
dashboard  
vents  
Floor vents  
Floor and  
windscreen  
demister  
vents  
Windscreen  
demister  
vents  
Fan Control Dial  
Adjusts the fan speed. Rotate the dial all  
Mode Control Dial  
Changes airflow.  
the way to OFF to turn everything off.  
Temperature Control Dial  
Adjusts the interior temperature.  
A/C Button  
Press to cool the interior or dehumidify  
while heating.  
Fresh Air/Recirculation Lever  
This lever controls the source of the air going into the system.  
(Recirculation) Mode:  
Recirculates air from the vehicle’s interior through the system.  
(Fresh Air) Mode:  
Maintains outside ventilation. Keep the system in fresh air mode  
in normal situations.  
* Not available on all models  
Continued  
209  
18 FIT JAZZ-32T5A6100.book 210 ページ 2017年8月23日 水曜日 午前11時24分  
uuHeating and Cooling System*uUsing Vents, Heating and A/C  
Heating  
The heater uses heat from the engine coolant  
to warm the air.  
1. Adjust the fan speed using the fan control  
dial.  
2. Select  
and  
.
3. Adjust the temperature using the  
temperature control dial.  
To rapidly warm up the interior  
1. Set the fan to the maximum speed.  
1To rapidly warm up the interior  
Change to fresh air mode as soon as the interior gets  
warm enough. The windows may fog up if kept in  
recirculation mode.  
2. Select  
3. Set the temperature to maximum warm.  
4. Select  
.
.
To dehumidify the interior  
When used in combination with the heater, the air conditioning system makes the  
interior warm and dry and can prevent the windows from fogging up.  
1. Turn the fan on.  
2. Press the A/C button to turn on the air conditioning.  
3. Select  
and  
. Adjust the temperature to your preference.  
210  
18 FIT JAZZ-32T5A6100.book 211 ページ 2017年8月23日 水曜日 午前11時24分  
uuHeating and Cooling System*uUsing Vents, Heating and A/C  
1To rapidly cool down the interior  
Cooling  
If the interior is very warm, you can cool it down  
more rapidly by partially opening the windows.  
1. Adjust the fan speed using the fan control  
dial.  
2. Select  
and  
.
During the Auto Idle Stop, the air conditioning  
system will be turned off. To keep the air  
conditioning on, press the Auto Idle Stop OFF button  
to turn off the Auto Idle Stop system.  
3. Adjust the temperature using the  
temperature control dial.  
4. Press the A/C button (indicator on).  
2 Auto Idle Stop System ON/OFF P. 411, 416  
To rapidly cool down the interior  
1. Set the fan to the maximum speed.  
2. Select  
.
3. Set the temperature to maximum cool.  
4. Press the A/C button (indicator on).  
5. Select  
.
Continued  
211  
18 FIT JAZZ-32T5A6100.book 212 ページ 2017年8月23日 水曜日 午前11時24分  
uuHeating and Cooling System*uUsing Vents, Heating and A/C  
1Defrosting the Windscreen and Windows  
Defrosting the Windscreen and Windows  
For your safety, make sure you have a clear view  
through all the windows before driving.  
Do not set the temperature near the upper or lower  
limit.  
1. Set the fan to the high speed.  
2. Select  
3. Select  
.
.
When cold air hits the windscreen, the outside of the  
windscreen may fog up.  
4. Press the A/C button (indicator on).  
If the side windows fog up, adjust the vents so that  
the air hits the side windows.  
To rapidly defrost the windows  
1. Set the fan to the maximum speed.  
2. Select  
3. Press the A/C button (indicator on).  
4. Select  
5. Set the temperature to maximum warm.  
.
Continuously variable transmission models  
Selecting  
with the fan on restarts the engine  
during the Auto Idle Stop activated.  
.
Manual transmission models  
To defrost the windscreen during the Auto Idle Stop  
activated, restart the engine as follows:  
1. Make sure the shift lever is in the (N position.  
2. Depress the clutch pedal fully.  
3. Select  
.
1To rapidly defrost the windows  
After defrosting the windows, switch over to fresh air  
mode.  
If you keep the system in recirculation mode, the  
windows may fog up from humidity. This impedes  
visibility.  
212  
18 FIT JAZZ-32T5A6100.book 213 ページ 2017年8月23日 水曜日 午前11時24分  
Climate Control System*  
Using Automatic Climate Control  
The automatic climate control system maintains the interior temperature you select.  
The system also selects the proper mix of heated or cooled air that raises or lowers  
the interior temperature to your preference as quickly as possible.  
1Using Automatic Climate Control  
If any icons are selected while using the climate  
control system in auto, the function of the icon that  
was selected will take priority.  
The AUTO indicator will go off, but functions  
unrelated to the icon that was selected will be  
controlled automatically.  
Dashboard  
vents  
Floor and  
dashboard  
vents  
Floor vents  
Floor and  
windscreen  
demister  
vents  
To prevent cold air from blowing in from outside, the  
fan may not start immediately when the AUTO icon  
is selected.  
Temperature Control  
Icons  
Mode Control Icon  
If the interior is very warm, you can cool it down  
more rapidly by partially opening the windows,  
turning the system on auto, and setting the  
temperature to low. Change the fresh mode to  
recirculation mode until the temperature cools down.  
Fan Control Icons  
When you set the temperature to the lower or upper  
limit, Lo or Hi is displayed.  
You can raise or lower the temperature or fan speed  
setting flicking either control icon.  
AUTO Icon  
(On/Off) Icon  
(Fresh Air) Icon  
A/C (Air Conditioning) Icon  
(Recirculation) Icon  
Left -hand drive models shown.  
Use the system when the engine is running.  
1. Select the AUTO icon.  
2. Adjust the interior temperature using the temperature control icons.  
3. Select the icon to cancel.  
* Not available on all models  
Continued  
213  
18 FIT JAZZ-32T5A6100.book 214 ページ 2017年8月23日 水曜日 午前11時24分  
uuClimate Control System*uUsing Automatic Climate Control  
Switching between the recirculation and fresh air modes  
Select the  
1Using Automatic Climate Control  
or  
icon to switch the mode depending on environmental  
Selecting the  
icon switches the climate control  
conditions.  
system between on and off. When turned on, the  
system returns to your last selection.  
Recirculation mode (indicator on): Recirculates air from the vehicle’s interior  
through the system.  
Fresh air mode (indicator on): Maintains outside ventilation. Keep the system  
in fresh air mode in normal situations.  
During the Auto Idle Stop, the air conditioning  
system will be turned off.  
The air conditioning system may also be turned off  
when driving uphill.  
214  
18 FIT JAZZ-32T5A6100.book 215 ページ 2017年8月23日 水曜日 午前11時24分  
uuClimate Control System*uUsing Automatic Climate Control  
1Defrosting the Windscreen and Windows  
Defrosting the Windscreen and Windows  
For your safety, make sure you have a clear view  
through all the windows before driving.  
Select the  
icon to turn the air conditioning  
system on and automatically switch the  
system to fresh air mode.  
Do not set the temperature near the upper or lower  
limit.  
When cold air hits the windscreen, the outside of the  
windscreen may fog up.  
Select the  
icon again to turn off, the  
system returns to the previous settings.  
If the side windows fog up, adjust the vents so that  
the air hits the side windows.  
Continuously variable transmission models  
To rapidly defrost the windows  
Selecting  
restarts the engine automatically  
during the Auto Idle Stop.  
1. Select the  
2. Select the  
icon.  
icon.  
Manual transmission models  
To defrost the windscreen during the Auto Idle Stop  
activated, restart the engine as follows:  
1. Make sure the shift lever is in the (N position.  
2. Depress the clutch pedal fully.  
3. Select the  
icon.  
1To rapidly defrost the windows  
After defrosting the windows, switch over to fresh air  
mode. If you keep the system in recirculation mode,  
the windows may fog up from humidity. This  
impedes visibility.  
Continued  
215  
18 FIT JAZZ-32T5A6100.book 216 ページ 2017年8月23日 水曜日 午前11時24分  
uuClimate Control System*uUsing Automatic Climate Control  
1Turning On and Off the Touch Screen Beep  
Turning On and Off the Touch Screen Beep  
If you touch any other icons during this procedure,  
the setting may fail. In this case, once you set the  
power mode to VEHICLE OFF (LOCK), then follow this  
procedure again.  
You hear the beep when operating the climate control system on the touch screen.  
This can be turned on and off.  
To turn off the beep:  
1. Set the power mode to ON.  
2. Touch the  
icon five times while pressing and holding  
the  
3. Release the  
of the temperature control  
.
, after -- blinks five times  
and OF is displayed.  
To turn on the beep:  
1. Set the power mode to ON.  
2. Touch the  
of the temperature control  
icon five times while pressing and holding  
the  
3. Release the  
and -- is displayed.  
.
, after OF blinks five times  
216  
18 FIT JAZZ-32T5A6100.book 217 ページ 2017年8月23日 水曜日 午前11時24分  
uuClimate Control System*uUsing Automatic Climate Control  
1Touch Panel Sensitivity Setting  
Touch Panel Sensitivity Setting  
If you touch any other icons during this procedure,  
You can set the level of sensitivity of the touch control panel to high, normal, or low.  
the setting may fail. In this case, once you set the  
power mode to VEHICLE OFF (LOCK), then follow this  
procedure again.  
1. Set the power mode to ON.  
2. Press and hold the AUTO icon, then press  
any of the following icons five times to set  
the level.  
Temperature display  
: High (Hi)*1.  
u Previous setting blinks five times and Hi  
will be displayed in the temperature  
display area.  
: Normal (--)  
u Previous setting blinks five times and --  
will be displayed in the temperature  
display area.  
: Low (Lo)  
u Previous setting blinks five times and Lo  
will be displayed in the temperature  
display area.  
3. Release the AUTO icon.  
*1: Default setting  
217  
18 FIT JAZZ-32T5A6100.book 218 ページ 2017年8月23日 水曜日 午前11時24分  
uuClimate Control System*uAutomatic Climate Control Sensors  
Automatic Climate Control Sensors  
The automatic climate control system is  
equipped with sensors. Do not cover or spill  
Sensor  
any liquid on them.  
Sensor  
218  

Related Topics

Popular Owner Manuals