2016-2020 Honda Jazz 4 Door Handling the Unexpected User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Handling the Unexpected for Your Honda Jazz 4 Door Third Generation (2016-2020)

18 FIT JAZZ-32T5A6100.book 539 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Handling the Unexpected  
This chapter explains how to handle unexpected troubles.  
Tools  
Types of Tools..................................540  
If a Tyre Goes Flat  
Changing a Flat Tyre* ......................541  
Temporarily Repairing a Flat Tyre......549  
Engine Does Not Start  
Overheating  
How to Handle Overheating............. 566  
Indicator, Coming On/Blinking  
If the Electric Power Steering (EPS) System  
Indicator Comes On............................570  
If the Low Tyre Pressure/Deflation Warning  
System Indicator Comes On or Blinks... 571  
If the Low Oil Level Symbol Appears .....572  
If the Low Oil Pressure Indicator Comes  
On ............................................. 568  
If the Charging System Indicator Comes  
On ................................................. 568  
If the Malfunction Indicator Lamp Comes  
On or Blinks ................................... 569  
If the Brake System Indicator (Red)  
Comes On.................................. 569  
Fuses  
Checking the Engine........................559  
If the Keyless Remote Battery is Weak ....560  
Emergency Engine Stop ...................561  
Jump Starting....................................562  
Shift Lever Does Not Move..............565  
Fuse Locations ................................. 573  
Inspecting and Changing Fuses........ 583  
Emergency Towing........................... 584  
When You Cannot Open the Tailgate .....587  
* Not available on all models  
539  
18 FIT JAZZ-32T5A6100.book 540 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Tools  
Types of Tools  
Models with a compact spare tyre  
1Types of Tools  
The tools are stored in the luggage area.  
Tool Case  
Jack  
Jack  
Wheel Nut Wrench/  
Jack Handle  
Detachable  
Towing Hook  
Jack Handle Bar  
Models with temporary tyre repair kit  
Temporary  
Tyre Repair Kit  
Detachable  
Towing Hook  
Jack Handle Bar  
Tool  
Case  
540  
18 FIT JAZZ-32T5A6100.book 541 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
If a Tyre Goes Flat  
Changing a Flat Tyre*  
*
If a tyre goes flat while driving, grasp the steering wheel firmly, and brake gradually  
to reduce speed. Then, stop in a safe place. Replace the flat tyre with a compact  
spare tyre. Go to a dealer as soon as possible to have the full-size tyre repaired or  
replaced.  
1Changing a Flat Tyre  
Follow compact spare precautions:  
Periodically check the tyre pressure of the compact  
spare. It should be set to the specified pressure.  
Specified Pressure: 420 kPa (4.2 kgf/cm2, 60 psi)  
1. Park the vehicle on firm, level, and non-slippery surface and apply the parking  
brake.  
When driving with the compact spare tyre, keep the  
vehicle speed under 80 km/h (50 mph). Replace with  
a full-size tyre as soon as possible.  
Continuously variable transmission models  
2. Move the shift lever to (P.  
The compact spare tyre and wheel in your vehicle are  
specifically for this model.  
Do not use them with another vehicle.  
Do not use another type of compact spare tyre or  
wheel with your vehicle.  
Manual transmission models  
2. Move the shift lever to (R.  
All models  
3. Turn on the hazard warning lights and turn the ignition switch to LOCK (0*1.  
Do not mount tyre chains on a compact spare tyre.  
If a chain-mounted front tyre goes flat, remove one of  
the full-size rear tyres and replace it with the compact  
spare tyre. Remove the flat front tyre and replace it with  
the full-size tyre that was removed from the rear. Mount  
the tyre chains on the front tyre.  
A compact spare tyre gives a harsher ride and less  
traction on some road surfaces. Use greater caution  
while driving.  
Do not use more than one compact spare tyre at the  
same time.  
The compact spare tyre is smaller than the regular  
tyre. Your vehicle’s ground clearance reduces when  
the compact spare tyre is installed. Driving over road  
debris or bumps could possibly damage the  
underside of your vehicle.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
* Not available on all models  
Continued  
541  
18 FIT JAZZ-32T5A6100.book 542 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuIf a Tyre Goes FlatuChanging a Flat Tyre  
*
1Changing a Flat Tyre  
Getting Ready to Replace the Flat Tyre  
■
WARNING: The jack can only be used for helping an  
emergency vehicle breakdown, not for changing the  
regular seasonal tyre or any other normal  
maintenance or repair operation.  
1. Open the luggage area floor lid.  
Floor Lid  
NOTICE  
Do not use the jack if it doesn’t work properly. Call  
your dealer or a professional towing service.  
2. Take the tool case out of the luggage area.  
3. Take the wheel nut wrench, jack handle bar  
and jack out of the tool case.  
Spare Tyre  
Jack  
4. Unscrew the wing bolt, and remove the  
spacer cone. Then, remove the spare tyre.  
Tool Case  
5. Place a wheel block or rock in front and rear  
of the wheel diagonal to the flat tyre.  
Wheel  
Blocks  
The tyre to be replaced.  
* Not available on all models  
542  
18 FIT JAZZ-32T5A6100.book 543 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuIf a Tyre Goes FlatuChanging a Flat Tyre  
6. Place the compact spare tyre (wheel side  
up) under the vehicle body, near the tyre  
that needs to be replaced.  
1Getting Ready to Replace the Flat Tyre  
Be careful not to hurt yourself when removing or  
storing the spare tyre.  
Models with wheel cover  
Jack Handle Bar  
7. Put the flat tip of the jack handle bar into  
the edge of the wheel cover. Carefully pry  
the edge and remove the cover.  
u Wrap a cloth around the flat tip of the  
jack handle bar to prevent scratches on  
the cover.  
Wheel  
Cover  
Wheel Nut  
All models  
8. Loosen each wheel nut about one turn  
using the wheel nut wrench.  
Continued  
543  
18 FIT JAZZ-32T5A6100.book 544 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuIf a Tyre Goes FlatuChanging a Flat Tyre  
1How to Set Up the Jack  
How to Set Up the Jack  
■
1. Place the jack under the jacking point  
closest to the tyre to be changed.  
3WARNING  
The vehicle can easily roll off the jack,  
seriously injuring anyone underneath.  
Follow the directions for changing a tyre  
exactly, and no person should place any  
portion of their body under a vehicle that is  
supported by a jack.  
WARNING: The jack shall be placed on a flat and  
stable surface on the same level as the vehicle is  
parked.  
2. Turn the end bracket clockwise as shown in  
the image until the top of the jack contacts  
the jacking point.  
u Make sure that the jacking point tab is  
resting in the jack notch.  
The jack that came with your vehicle has the  
following label.  
1. See Owner’s Manual.  
2. Never get under vehicle when supported by jack.  
3. Place jack underneath reinforced area.  
544  
18 FIT JAZZ-32T5A6100.book 545 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuIf a Tyre Goes FlatuChanging a Flat Tyre  
3. Raise the vehicle, using the jack handle bar  
and the jack handle, until the tyre is off the  
ground.  
1How to Set Up the Jack  
Do not use the jack with people or luggage in the  
vehicle.  
Use the jack provided in your vehicle.  
Other jacks may not support the weight (“load”) or  
may not fit the jacking point.  
Jack  
Handle  
Bar  
Wheel Nut  
Wrench as Jack Handle  
The following instructions must be followed to use  
the jack safely:  
• Do not use while the engine is running.  
• Use only where the ground is firm and level.  
• Use only at the jacking points.  
• Do not get in the vehicle while using the jack.  
• Do not put anything on top of or underneath the  
jack.  
Loose items can fly around the interior in a crash and  
can seriously injure the occupants.  
Store the wheel, jack, and tools securely before  
driving.  
Continued  
545  
18 FIT JAZZ-32T5A6100.book 546 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuIf a Tyre Goes FlatuChanging a Flat Tyre  
1Replacing the Flat Tyre  
Replacing the Flat Tyre  
■
Do not over tighten the wheel nuts by applying extra  
torque using your foot or a pipe.  
1. Remove the wheel nuts and flat tyre.  
Wheel  
Nut  
Models with wheel cover  
Make sure the wire support ring is hooked into the  
clips around the edge of the wheel cover.  
2. Wipe the mounting surfaces of the wheel  
with a clean cloth.  
3. Mount the compact spare tyre.  
4. Screw the wheel nuts until they touch the  
lips around the mounting holes, and stop  
rotating.  
Clips  
Clips  
Align the valve mark on the wheel cover to the tyre  
valve on the wheel, then install the wheel cover.  
Valve Mark  
Wheel cover  
5. Lower the vehicle and remove the jack.  
Tighten the wheel nuts in the order  
indicated in the image. Go around,  
tightening the nuts, two to three times in  
this order.  
Wheel nut torque:  
108 N∙m (11 kgf∙m, 80 lbf∙ft)  
546  
18 FIT JAZZ-32T5A6100.book 547 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuIf a Tyre Goes FlatuChanging a Flat Tyre  
1Storing the Flat Tyre  
Storing the Flat Tyre  
■
Models with aluminium wheels  
3
WARNING  
Centre Cap  
1. Remove the centre cap.  
Loose items can fly around the interior in a  
crash and can seriously injure the  
occupants.  
Store the wheel, jack, and tools securely  
before driving.  
Models with wheel cover  
Models with a compact spare tyre  
2. Remove the spacer cone from the wing  
bolt, flip it over, and insert it back on the  
bolt.  
Wing Bolt  
Make sure the wire support ring is on the outer side  
of the tyre valve as shown.  
For full-size  
tyre  
Spacer  
Cone  
Tyre Valve  
All models  
3. Place the flat tyre face down in the spare  
tyre well.  
4. Secure the flat tyre with the wing bolt.  
5. Securely put the jack and wheel nut wrench  
back in the tool case.  
For compact  
spare tyre  
Wire Support Ring  
6. Store the case in the luggage area.  
Continued  
547  
18 FIT JAZZ-32T5A6100.book 548 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuIf a Tyre Goes FlatuChanging a Flat Tyre  
Deflation Warning System and the Spare Tyre  
■
If you replace a flat tyre with the spare tyre,  
indicator comes on while you are  
driving. After driving for a few kilometres (miles), the indicator will start blinking for  
a short time and then stay on, but this is normal.  
Calibrate the deflation warning system when you replace the tyre with a specified  
regular tyre.  
2 Deflation Warning System Calibration P. 449  
548  
18 FIT JAZZ-32T5A6100.book 549 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
Temporarily Repairing a Flat Tyre  
If the tyre has a large cut or is otherwise severely damaged, you will need to have  
the vehicle towed. If the tyre only has a small puncture, from a nail for instance, you  
can use the temporary tyre repair kit so that you can drive to the nearest service  
station for a permanent repair.  
1Temporarily Repairing a Flat Tyre  
The kit should not be used in the following situations.  
Instead, contact a dealer or a roadside assistant to  
have the vehicle towed.  
• The tyre sealant has expired.  
• More than one tyre is punctured.  
• The puncture or cut is greater than 4 mm (3/16  
inch).  
If a tyre goes flat while driving, grasp the steering wheel firmly, and brake gradually  
to reduce speed. Then stop in a safe place.  
• The tyre side wall is damaged or the puncture is  
outside the tyre area.  
1. Park the vehicle on firm, level, and non-slippery ground and apply the parking  
brake.  
Continuously variable transmission models  
2. Move the shift lever to (P.  
Manual transmission models  
Contact Area  
2. Move the shift lever to (R.  
All models  
3. Turn on the hazard warning lights and turn the ignition switch to LOCK (0*1.  
u When towing a trailer, unhitch the trailer.  
When the puncture is:  
Smaller than 4 mm (3/16 inch)  
Larger than 4 mm (3/16 inch)  
Kit Use  
Yes  
No  
• Damage has been caused by driving with the tyres  
extremely under inflated.  
• The tyre bead is no longer seated.  
• The rim is damaged.  
Do not remove a nail or screw that punctured the  
tyre. If you remove it from the tyre, you may not be  
able to repair the puncture using the kit.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
Continued  
549  
18 FIT JAZZ-32T5A6100.book 550 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
1Getting Ready to Temporarily Repair the Flat Tyre  
Getting Ready to Temporarily Repair the Flat Tyre  
■
When making a temporary repair, carefully read the  
instruction manual provided with the kit.  
Air Compressor  
The “Tyre Sealant  
in the Tyre” Sticker  
Sealant Bottle  
Handling Manual  
Expiration  
Date  
The “Maximum Speed” Sticker  
1. Open the luggage area floor lid, then take  
the kit out of the tool box.  
Floor Lid  
2. Place the kit, face up, on flat ground near  
the flat tyre, away from traffic. Do not place  
the kit on its side.  
Tyre Repair Kit  
550  
18 FIT JAZZ-32T5A6100.book 551 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
1Injecting the Sealant and Air in the Tyre  
Injecting the Sealant and Air in the Tyre  
■
1. Take the air compressor hose and plug  
cord out of the back of the air compressor.  
3WARNING  
Tyre sealant contains substances that are  
harmful and can be fatal if swallowed.  
Plug Cord  
Air Compressor  
Hose  
If accidentally swallowed, do not induce  
vomiting. Drink plenty of water and get  
medical attention immediately.  
For skin or eye contact, flush with cool  
water and get medical attention if  
necessary.  
2. Remove the cap from the air compressor.  
Keep the sealant bottle out of the reach of children.  
In cold temperatures, the sealant may not flow easily.  
In this situation, warm it by keeping the bottle in the  
passenger compartment before using.  
The sealant can permanently stain clothing and other  
materials. Be careful during handling and wipe away  
any spills immediately.  
3. Shake the bottle well.  
Continued  
551  
18 FIT JAZZ-32T5A6100.book 552 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
4. Remove the bottle cap.  
1Injecting the Sealant and Air in the Tyre  
Bottle Cap  
u Do not remove the sealed cover.  
Do not remove the empty bottle after injecting the  
sealant.  
Not  
Removed  
See a Honda dealer for a replacement of sealant  
bottle and proper disposal of the empty bottle.  
5. Screw the sealed bottle onto the air  
compressor.  
u Screw the bottle tightly so that it does  
not become loose.  
6. Unscrew the valve cap.  
Valve Cap  
Valve  
552  
18 FIT JAZZ-32T5A6100.book 553 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
7. Screw the air compressor hose onto the  
1Injecting the Sealant and Air in the Tyre  
Air Compressor Hose  
tyre valve.  
Air  
Valve  
3
WARNING  
u Make sure the air valve is closed and the  
air compressor is turned off.  
Running the engine with the vehicle in an  
enclosed or even partly enclosed area can  
cause a rapid build-up of toxic carbon  
monoxide.  
Breathing this colourless, odourless gas can  
cause unconsciousness and even death.  
Only run the engine to power the air  
compressor with the vehicle outdoors.  
Valve  
8. Plug in the compressor to the accessory  
power socket.  
Plug  
2 Accessory Power Socket(s) P. 205  
9. Start the engine.  
2 Carbon Monoxide Gas P. 82  
Turn the air compressor off when connecting the air  
compressor hose.  
You hear a motor sound coming from the activated  
air compressor. This is normal.  
Accessory Power Socket  
If the specified air pressure is not reached within 10  
minutes, the tyre may be too severely damaged for  
the kit to provide the necessary seal and your vehicle  
will need to be towed.  
If you want to measure the air pressure using a  
gauge, turn the air compressor off first.  
Continued  
553  
18 FIT JAZZ-32T5A6100.book 554 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
10. Turn on the air compressor and inflate the  
1Injecting the Sealant and Air in the Tyre  
Air Valve  
tyre to the specified air pressure.  
u The compressor starts injecting sealant  
Inform the use of tyre sealant when you ask a Honda  
dealer or the road assistant service for replacing or  
repairing the flat tyre.  
Switch  
and air into the tyre.  
u Refer to the driver’s doorjamb label for  
This air compressor is designed for the automotive  
tyre. Check the following:  
the specified pressure.  
11. After the air pressure reaches to specified  
pressure, turn off the compressor.  
u Check the air pressure gauge on the air  
compressor.  
ON  
• The power supply of the air compressor is limited to  
your vehicle’s 12-volt DC accessory power socket.  
• Do not operate the temporary tyre repair kit  
compressor for more than 15 minutes. The  
compressor can overheat and become permanently  
damaged.  
OFF  
u If overinflated, release the air by turning  
the air valve. Be careful not to spill any  
sealant.  
Make it cool down when using the compressor  
continuously.  
12. Unplug the plug from the accessory power  
socket.  
13. Unscrew the air compressor hose from the  
tyre valve. Install the hose cap.  
u Be careful not to spill any sealant when  
the hose is disconnected. Wipe away  
any spills.  
14. Apply the wheel label to the flat surface of  
the wheel.  
Wheel Label  
u The wheel surface must be clean to  
ensure the label adheres properly.  
15. Store the tyre repair kit in the luggage  
area.  
u Do not remove the sealant bottle from  
the air compressor.  
554  
18 FIT JAZZ-32T5A6100.book 555 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
1Distributing the Sealant in the Tyre  
Distributing the Sealant in the Tyre  
■
1. Apply the speed limit label to the location  
as shown.  
3
WARNING  
Running the engine with the vehicle in an  
enclosed or even partly enclosed area can  
cause a rapid build-up of toxic carbon  
monoxide.  
2. Drive the vehicle for about 10 minutes or  
three to ten kilometres (two to six miles).  
u Do not exceed 80 km/h (50 mph).  
3. Stop the vehicle in a safe place.  
4. Recheck the air pressure using the gauge  
on the air compressor.  
Breathing this colourless, odourless gas can  
cause unconsciousness and even death.  
Only run the engine to power the air  
compressor with the vehicle outdoors.  
Speed Limit Label  
u Do not turn the air compressor on to  
check the pressure.  
Refer to the driver’s doorjamb label for the specified  
pressure.  
Continued  
555  
18 FIT JAZZ-32T5A6100.book 556 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
5. If the air pressure is  
1Distributing the Sealant in the Tyre  
Air  
Compressor  
• Less than 130 kPa (19 psi): Do not add  
air and continue driving. The leak is too  
severe. Call for help and have your  
vehicle towed.  
Make sure to store the air compressor with the empty  
bottle in the luggage area.  
2 Emergency Towing P. 584  
• Specified air pressure (See the label on  
driver’s doorjamb.) or more: Continue  
driving until you reach the nearest  
service station. Do not exceed 80 km/h  
(50 mph).  
ON  
OFF  
• Greater than 130 kPa (19 psi), but less  
than specified air pressure (See the label  
on driver’s doorjamb.): Inflate the tyre to  
the specified air pressure.  
2 Inflating an Under-inflated Tyre  
P. 557  
And repeat steps 2 to 4 until you reach the  
nearest service station. Do not exceed 80  
km/h (50 mph).  
u The distance to the nearest service  
station has to be within about 200  
kilometres (120 miles).  
6. Repackage and properly stow the kit.  
556  
18 FIT JAZZ-32T5A6100.book 557 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
1Inflating an Under-inflated Tyre  
Inflating an Under-inflated Tyre  
■
You can use the kit to inflate a non-punctured under-inflated tyre.  
1. Take the air compressor out of the  
3
WARNING  
Hose  
Running the engine with the vehicle in an  
enclosed or even partly enclosed area can  
cause a rapid build-up of toxic carbon  
monoxide.  
Air  
Valve  
luggage area.  
2. Place the kit, face up, on flat ground near  
the tyre to inflate, away from traffic. Do  
not place the kit on its side.  
3. Remove the valve cap.  
4. Attach the hose onto the tyre valve. Screw  
it until it is tight.  
Breathing this colourless, odourless gas can  
cause unconsciousness and even death.  
Only run the engine to power the air  
compressor with the vehicle outdoors.  
u Make sure the air valve is closed.  
5. Plug in the compressor to the accessory  
power socket.  
u Be careful not to pinch the cord in a  
door or window.  
You hear a motor sound coming from the activated  
air compressor. This is normal.  
Plug  
2 Accessory Power Socket(s) P. 205  
6. Start the engine.  
2 Carbon Monoxide Gas P. 82  
Accessory Power Socket  
Continued  
557  
18 FIT JAZZ-32T5A6100.book 558 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
7. Turn on the air compressor and inflate the  
tyre to the specified air pressure (See the  
label on driver’s doorjamb.)  
8. Turn off the air compressor.  
1Inflating an Under-inflated Tyre  
Air Valve  
This air compressor is designed for the automotive  
tyre. Check the following:  
Switch  
• The power supply of the air compressor is limited to  
your vehicle’s 12-volt DC accessory power socket.  
• Do not operate the temporary tyre repair kit  
compressor for more than 15 minutes. The  
compressor can overheat and become permanently  
damaged.  
u Check the air pressure gauge on the air  
compressor.  
u If overinflated, turn the air valve to  
deflate.  
ON  
OFF  
9. Turn off the engine, then unplug the air  
compressor from the accessory power  
socket.  
10. Unscrew the air compressor hose from the  
tyre valve. Reinstall the valve cap.  
11. Store the air compressor in the luggage  
area.  
Make it cool down when using the compressor  
continuously.  
If you want to measure the air pressure using a  
gauge, turn the air compressor off first.  
558  
18 FIT JAZZ-32T5A6100.book 559 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Engine Does Not Start  
Checking the Engine  
1Checking the Engine  
If the engine does not start, check the starter.  
If you must start the vehicle immediately, use an  
assisting vehicle or booster battery to jump start it.  
2 Jump Starting P. 562  
Models with keyless access system  
Do not hold the ENGINE START/STOP button for  
more than 15 seconds.  
Starter condition  
Checklist  
Models with keyless access system  
Starter doesn’t turn or turns  
over slowly.  
Check for an indication on the multi-information display.  
●
If  
appears.  
The battery may be dead. Check  
each of the items on the right and  
respond accordingly.  
2 If the Keyless Remote Battery is Weak P. 560  
uMake sure the keyless remote is in its operating range.  
2 ENGINE START/STOP Button Operating Range P. 165  
Check the brightness of the interior lights.  
Turn on the interior lights and check the brightness.  
●
If the interior lights are dim or do not come on at all 2 Battery P. 522  
If the interior lights come on normally 2 Fuses P. 573  
●
The starter turns over normally Review the engine start procedure.  
but the engine doesn’t start.  
Follow its instructions, and try to start the engine again.  
2 Starting the Engine P. 392, 395  
There may be a problem with the  
fuse. Check each of the items on  
the right and respond accordingly.  
Check the immobilizer system indicator.  
When the immobilizer system indicator is blinking, the engine cannot be started.  
2 Immobilizer System P. 159  
Check the fuel level.  
There should be enough fuel in the tank.  
2 Fuel Gauge P. 128  
Check the fuses.  
Check all fuses, or have your vehicle checked by a dealer.  
2 Inspecting and Changing Fuses P. 583  
If the problem continues:  
2 Emergency Towing P. 584  
559  
18 FIT JAZZ-32T5A6100.book 560 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuEngine Does Not StartuIf the Keyless Remote Battery is Weak  
Models with keyless access system  
If the Keyless Remote Battery is Weak  
If the beeper sounds,  
appears on the multi-information display, and the  
ENGINE START/STOP button flashes, and the engine does not start.  
Start the engine as follows.  
1. Touch the centre of the ENGINE START/  
STOP button with the H logo on the keyless  
remote while the ENGINE START/STOP  
button is flashing. The buttons on the  
keyless remote should be facing you.  
u The ENGINE START/STOP button  
flashes for about 30 seconds.  
2. Depress the brake pedal and the clutch  
pedal (manual transmission) and press the  
ENGINE START/STOP button within 10  
seconds after the beeper sounds and the  
ENGINE START/STOP button changes  
from flashing to on.  
u If you do not depress the pedal, the  
mode will change to ACCESSORY.  
560  
18 FIT JAZZ-32T5A6100.book 561 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuEngine Does Not StartuEmergency Engine Stop  
Models with keyless access system  
Emergency Engine Stop  
1Emergency Engine Stop  
The ENGINE START/STOP button may be used to stop the engine due to an  
emergency situation even while driving. If you must stop the engine, do either of the  
following operations:  
Do not press the button while driving unless it is  
absolutely necessary for the engine to be turned off.  
• Press and hold the ENGINE START/STOP button for about two seconds.  
• Firmly press the ENGINE START/STOP button three times.  
The steering wheel will not lock.  
Continuously variable transmission models  
The power mode is in ACCESSORY when the engine is stopped.  
To change the mode to VEHICLE OFF, move the shift lever to (P after the vehicle  
comes to a complete stop. Then press the ENGINE START/STOP button twice  
without depressing the brake pedal.  
Manual transmission models  
The power mode changes to VEHICLE OFF.  
561  
18 FIT JAZZ-32T5A6100.book 562 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Jump Starting  
1Jump Starting  
Jump Starting Procedure  
■
Turn off the power to electric devices, such as audio and lights. Turn off the engine,  
then open the bonnet.  
3
WARNING  
A battery can explode if you do not follow  
the correct procedure, seriously injuring  
anyone nearby.  
1. Connect the first jumper cable to the  
position shown in a Illustration.  
u Remove the cover from the under-  
bonnet fuse box.  
2 Engine Compartment Fuse Box  
Keep all sparks, open flames, and smoking  
materials away from the battery.  
P. 573  
2. Connect the other end of the first jumper  
cable to the booster battery + terminal.  
u Use a 12-volt booster battery only.  
u Connect when using the automotive  
battery charger to boost your 12-volt  
battery, select a lower charging voltage  
than 15-volt. Check the charger manual  
for the proper setting.  
NOTICE  
If a battery sits in extreme cold, the electrolyte inside  
can freeze. Attempting to jump start with a frozen  
battery can cause it to rupture.  
Booster Battery  
Securely attach the jumper cables clips so that they  
do not come off when the engine vibrates. Also be  
careful not to tangle the jumper cables or allow the  
cable ends to touch each other while attaching or  
detaching the jumper cables.  
3. Connect the second jumper cable to the  
booster battery - terminal.  
562  
18 FIT JAZZ-32T5A6100.book 563 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuJump Startingu  
4. Connect the other end of the second  
jumper cable to the stud bolt as shown. Do  
not connect this jumper cable to any other  
part.  
1Jump Starting  
Battery performance degrades in cold conditions and  
may prevent the engine from starting.  
5. If your vehicle is connected to another  
vehicle, start the assisting vehicle's engine  
and increase its rpm slightly.  
6. Attempt to start your vehicle's engine. If it  
turns over slowly, check that the jumper  
cables have good metal-to-metal contact.  
Continued  
563  
18 FIT JAZZ-32T5A6100.book 564 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuJump Startingu  
What to Do After the Engine Starts  
■
Once your vehicle's engine has started, remove the jumper cables in the following  
order.  
1. Disconnect the jumper cable from your vehicle's stud bolt.  
2. Disconnect the other end of the jumper cable from the booster battery -  
terminal.  
3. Disconnect the jumper cable from your vehicle's battery + terminal.  
4. Disconnect the other end of the jumper cable from the booster battery +  
terminal.  
Have your vehicle inspected by a nearby service station or a dealer.  
564  
18 FIT JAZZ-32T5A6100.book 565 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Shift Lever Does Not Move  
Continuously variable transmission models  
Follow the procedure below if you cannot move the shift lever out of the (P  
position.  
Releasing the Lock  
■
1. Set the parking brake.  
Slot  
Models without keyless access system  
2. Remove the key from the ignition switch.  
Models with keyless access system  
2. Remove the built-in key from the keyless  
remote.  
Cover  
All models  
3. Wrap a cloth around the tip of a small flat-  
tip screwdriver. Put it into the shift lock  
release slot as shown in the image, and  
remove the cover.  
4. Insert the key into the shift lock release slot.  
5. While pushing the key down, press the shift  
lever release button, and place the shift  
lever into (N.  
Shift Lock  
Release Slot  
u The lock is now released. Have the shift  
lever checked by a dealer as soon as  
possible.  
Release Button  
565  
18 FIT JAZZ-32T5A6100.book 566 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Overheating  
How to Handle Overheating  
Overheating symptoms are as follows:  
1How to Handle Overheating  
• The high temperature indicator comes on or the engine suddenly loses power.  
• The message appears on the multi-information display.  
• Steam or spray comes out of the engine compartment.  
3WARNING  
Steam and spray from an overheated  
engine can seriously scald you.  
■ First thing to do  
1. Immediately park the vehicle in a safe place.  
2. Turn off all accessories and turn on the hazard warning lights.  
u No steam or spray present: Keep the engine running and open the bonnet.  
u Steam or spray is present: Turn off the engine and wait until it subsides.  
Then open the bonnet.  
Do not open the bonnet if steam is coming  
out.  
NOTICE  
Continuing to drive with the high temperature  
indicator on may damage the engine.  
566  
18 FIT JAZZ-32T5A6100.book 567 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuOverheatinguHow to Handle Overheating  
■ Next thing to do  
1How to Handle Overheating  
1. Check that the cooling fan is operating and  
stop the engine once the high temperature  
indicator goes off.  
3
WARNING  
Removing the radiator cap while the  
engine is hot can cause the coolant to spray  
out, seriously scalding you.  
u If the cooling fan is not operating,  
MAX  
immediately stop the engine.  
2. Once the engine has cooled down, inspect  
the coolant level and check the cooling  
system components for leaks.  
u If the coolant level in the reserve tank is  
low, add coolant until it reaches the  
MAX mark.  
MIN  
Always let the engine and radiator cool  
down before removing the radiator cap.  
Reserve Tank  
If the coolant is leaking, contact a dealer for repairs.  
Use water as an emergency/temporary measure only.  
Have a dealer flush the system with proper antifreeze  
as soon as possible.  
u If there is no coolant in the reserve tank,  
check that the radiator is cool. Cover the  
radiator cap with a heavy cloth and open  
the cap. If necessary, add coolant up to  
the base of the filler neck, and put the  
cap back on.  
■ Last thing to do  
Once the engine has cooled sufficiently, restart it and check the high temperature  
indicator.  
If the high temperature indicator is off, resume driving. If it stays on, contact a dealer  
for repairs.  
567  
18 FIT JAZZ-32T5A6100.book 568 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Indicator, Coming On/Blinking  
If the Low Oil Pressure Indicator Comes On  
■ Reasons for the indicator to come on  
Comes on when the engine oil pressure is low.  
■ What to do as soon as the indicator comes on  
1. Immediately park the vehicle on level ground in a safe place.  
2. If necessary, turn the hazard warning lights on.  
■ What to do after parking the vehicle  
1. Stop the engine and let it sit for about three minutes.  
2. Open the bonnet and check the oil level.  
2 Oil Check P. 492  
1If the Low Oil Pressure Indicator Comes On  
NOTICE  
Running the engine with low oil pressure can cause  
serious mechanical damage almost immediately.  
3. Start the engine and check the low oil pressure indicator.  
u The indicator goes off: Start driving again.  
u The indicator does not go off within 10 seconds: Stop the engine  
and contact a dealer for repairs immediately.  
1If the Charging System Indicator Comes On  
If the Charging System Indicator Comes On  
If you need to stop temporarily, do not turn off the  
engine. Restarting the engine may rapidly discharge  
the battery.  
■ Reasons for the indicator to come on  
Comes on when the battery is not being charged.  
■ What to do when the indicator comes on  
Turn off the heating and cooling system*/climate control system*, rear  
demister, and other electrical systems, and immediately contact a dealer  
for repairs.  
* Not available on all models  
568  
18 FIT JAZZ-32T5A6100.book 569 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicator, Coming On/BlinkinguIf the Malfunction Indicator Lamp Comes On or Blinks  
If the Malfunction Indicator Lamp Comes On or Blinks  
■ Reasons for the indicator lamp to come on or blink  
• Comes on when there is a problem with the engine emissions control  
system.  
1If the Malfunction Indicator Lamp Comes On or Blinks  
NOTICE  
If you drive with the malfunction indicator lamp on,  
the emissions control system and the engine could be  
damaged.  
• Blinks when engine misfiring is detected.  
■ What to do when the indicator lamp comes on  
Avoid high speeds and immediately get your vehicle inspected at a  
dealer.  
■ What to do when the indicator lamp blinks  
Park the vehicle in a safe place with no flammable items and wait at least  
10 minutes or more with the engine stopped until it cools.  
If the malfunction indicator lamp blinks again when  
restarting the engine, drive to the nearest dealer at  
50 km/h (30 mph) or less. Have your vehicle  
inspected.  
If the Brake System Indicator (Red) Comes On  
1If the Brake System Indicator (Red) Comes On  
Have your vehicle repaired immediately.  
It is dangerous to drive with low brake fluid. If there  
is no resistance from the brake pedal, stop  
immediately in a safe place. If necessary, downshift  
the gears.  
■ Reasons for the indicator to come on  
• The brake fluid is low.  
• There is a malfunction in the brake system.  
■ What to do when the indicator comes on while driving  
Depress the brake pedal lightly to check pedal pressure.  
• If normal, check the brake fluid level the next time you stop.  
• If abnormal, take immediate action. If necessary, downshift the  
transmission to slow the vehicle using engine braking.  
If the brake system indicator and ABS indicator come  
on simultaneously, the electronic brake distribution  
system is not working. This can result in vehicle  
instability under sudden braking.  
Have your vehicle inspected by a dealer immediately.  
569  
18 FIT JAZZ-32T5A6100.book 570 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicator, Coming On/BlinkinguIf the Electric Power Steering (EPS) System Indicator Comes On  
If the Electric Power Steering (EPS) System Indicator  
Comes On  
■ Reasons for the indicator to come on  
• Comes on when there is a problem with the EPS system.  
• If you depress the accelerator pedal repeatedly to increase the engine  
speed while the engine is idling, the indicator comes on, and  
sometimes the steering wheel becomes harder to operate.  
■ What to do when the indicator comes on  
Stop the vehicle in a safe place and restart the engine.  
If the indicator comes on and stays on, immediately have your vehicle  
inspected by a dealer.  
570  
18 FIT JAZZ-32T5A6100.book 571 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicator, Coming On/BlinkinguIf the Low Tyre Pressure/Deflation Warning System Indicator Comes On or Blinks  
If the Low Tyre Pressure/Deflation Warning System  
Indicator Comes On or Blinks  
■ Reasons for the indicator to come on or blink  
A tyre pressure is significantly low, or the deflation warning system has  
not been calibrated. If there is a problem with the deflation warning  
system, the indicator blinks for about one minute, and then stays on.  
If the compact spare tyre* is installed, the indicator will either come on  
or it will first blink for about one minute, then stay on.  
■ What to do when the indicator comes on  
Drive carefully and avoid abrupt cornering and hard braking.  
Stop your vehicle in a safe place. Check the tyre pressure and adjust the  
pressure to the specified level. The specified tyre pressure is on a label on  
the driver side doorjamb.  
1If the Low Tyre Pressure/Deflation Warning System Indicator  
Comes On or Blinks  
NOTICE  
Driving on an extremely underinflated tyre can cause  
it to overheat. An overheated tyre can fail. Always  
inflate your tyres to the prescribed level.  
u Calibrate the deflation warning system after the tyre pressure is  
adjusted.  
2 Deflation Warning System Calibration P. 449  
If the compact spare tyre* causes the indicator to come on, change the  
tyre to a full-size tyre. The indicator goes off after driving for a few  
kilometers (miles).  
u Calibrate the deflation warning system after a full-size tyre is  
reinstalled.  
2 Deflation Warning System Calibration P. 449  
■ What to do when the indicator blinks, then remains on  
Have the tyre inspected by a dealer as soon as possible. If the compact  
spare tyre* causes the indicator to first blink, and then stay on, change  
the tyre to a full-size tyre.  
The indicator goes off after driving for a few kilometres (miles).  
u Calibrate the deflation warning system after a full-size tyre is  
reinstalled.  
2 Deflation Warning System Calibration P. 449  
* Not available on all models  
571  
18 FIT JAZZ-32T5A6100.book 572 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIndicator, Coming On/BlinkinguIf the Low Oil Level Symbol Appears  
If the Low Oil Level Symbol Appears  
■ Reasons for the symbol to appear  
1If the Low Oil Level Symbol Appears  
Appears when the engine oil level is low.  
■ What to do as soon as the symbol appears  
1. Immediately park the vehicle on level ground in a safe place.  
2. If necessary, turn the hazard warning lights on.  
■ What to do after parking the vehicle  
1. Stop the engine and let it sit for about three minutes.  
2. Open the bonnet and check the oil level.  
2 Oil Check P. 492  
NOTICE  
Running the engine with low oil level can cause  
serious mechanical damage almost immediately.  
This system activates after the engine warms up. If  
the outside temperature is extremely low, you may  
have to drive for a long time until the system senses  
the engine oil level.  
If the symbol appears again, stop the engine and  
contact a dealer for repairs immediately.  
572  
18 FIT JAZZ-32T5A6100.book 573 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Fuses  
Fuse Locations  
If any electrical devices are not working,  
turn the ignition switch to LOCK (0*1 and  
check to see if any applicable fuse is blown.  
Engine Compartment Fuse Box  
■
■ Fuse Box A  
Located near the brake fluid reserve tank.  
Push the tabs to open the box.  
Locate the fuse in question by the following  
image and table.  
33  
32  
31  
30  
25  
26  
27  
28  
29  
23  
13 14 15 16 17 18 19 20 21 22  
24  
12  
11  
1
2
3
4
5
6
7
8
9
10  
Tab  
Front  
Continued  
573  
18 FIT JAZZ-32T5A6100.book 574 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuFusesuFuse Locations  
■ Circuit protected and fuse rating  
Circuit Protected  
Amps  
Circuit Protected  
Back Up1  
Back Up1  
Interior Light  
Sub Fan*  
DC/DC 1*  
Starter*  
Amps  
10 A  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
Headlight Low Beam Main 20 A  
21*2  
21*3  
22  
23  
24  
25  
26  
27  
28  
Contactor*  
Hazard  
DBW  
Wiper*  
Stop  
IGP  
IG Coil  
ECP*  
INJ  
(30 A)  
10 A  
15 A  
(30 A)  
10 A  
15 A  
15 A  
(10 A)  
(20 A)  
(30 A)  
30 A  
(30 A)  
7.5 A  
7.5 A  
–
15 A  
7.5 A  
(30 A)  
30 A  
(7.5 A)  
(7.5 A)  
–
CAM SNSR  
–
ST MG*  
Back Up2  
Back Up2  
IGP LAF  
(7.5 A)  
30 A  
10 A  
29*2  
29*3  
30  
DC/DC2*  
Main Fan  
Starter SW*  
MG Clutch  
Battery Sensor  
–
DRL  
Horn  
Front Fog Lights*  
10 A  
31  
IGPS  
7.5 A  
10 A  
32 Right Headlight Low Beam  
33 Left Headlight Low Beam  
10 A  
*1: Models with the keyless access system have an  
ENGINE START/STOP button instead of an ignition  
switch.  
*2: Except SE and TREND models with continuously  
variable transmission.  
7.5 A  
10 A  
(15 A)  
7.5 A  
*3: SE and TREND models with continuously variable  
transmission.  
UB ECU  
* Not available on all models  
574  
18 FIT JAZZ-32T5A6100.book 575 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuFusesuFuse Locations  
■ Fuse Box B  
■ Circuit protected and fuse rating  
Pull up the cover on the + terminal, then  
remove it while pulling out the tab as  
shown.  
Circuit Protected  
Battery Main  
RB Main 1  
Amps  
100 A  
70 A  
80 A  
80 A  
a
b
c
RB Main 2  
CAP Main  
Replacement of engine compartment fuses  
should be done by a dealer.  
d
Tab  
Continued  
575  
18 FIT JAZZ-32T5A6100.book 576 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuFusesuFuse Locations  
Driver Side Interior Fuse Box  
■
■ Type A  
Located behind the instrument panel.  
UP  
Locate the fuse in question by the following  
image and table.  
1
2
3
4
5
6
7
8
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
9
10  
11  
12  
13  
14  
576  
18 FIT JAZZ-32T5A6100.book 577 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuFusesuFuse Locations  
■ Circuit protected and fuse rating  
Circuit Protected  
Amps  
20 A  
–
(10 A)  
15 A  
15 A  
–
Circuit Protected  
–
Washer  
Rear Wiper Main*  
Amps  
–
Circuit Protected  
Amps  
1
2
3
4
5
6
7
8
9
Door Lock  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
–
–
–
–
–
15 A  
(10 A)  
7.5 A  
7.5 A  
(7.5 A)  
7.5 A  
10 A  
10 A  
10 A  
10 A  
15 A  
7.5 A  
7.5 A  
(7.5 A)  
20 A  
7.5 A  
(7.5 A)  
10 A  
10 A  
Keyless Access System*  
Left Side Door Unlock  
Right Side Door Unlock  
–
A/C  
Daytime Running Lights  
Starter*  
ABS/VSA  
SRS1  
Left Headlight High Beam  
ACG  
–
–
Driver’s Power Window  
Passenger’s Power Window 20 A  
Rear Left Power Window 20 A  
20 A  
10  
11 Rear Right Power Window 20 A  
Power Window  
Fuel Pump  
SRS2  
12  
13  
14  
Left Side Door Lock  
Right Side Door Lock  
Rear Fog Light  
15 A  
15 A  
10 A  
Meter  
15 Right Headlight High Beam 10 A  
Mission SOL*  
Front ACC Socket  
ACC  
ACC Key Lock  
Option  
16  
17  
18  
19  
20  
STS*  
–
(7.5 A)  
–
–
–
(20 A)  
–
Heated Seat*  
–
Rear Wiper  
* Not available on all models  
Continued  
577  
18 FIT JAZZ-32T5A6100.book 578 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuFusesuFuse Locations  
■ Type B  
UP  
Cover  
3
4
12  
13  
14  
15  
5
6
7
2
1
8
9
10  
Remove the cover by putting the flat-tip  
screwdriver into the side slot as shown.  
Locate the fuse in question by the following  
image and table.  
11  
578  
18 FIT JAZZ-32T5A6100.book 579 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuFusesuFuse Locations  
■ Circuit protected and fuse rating  
Circuit Protected  
Amps  
Circuit Protected  
Heater  
IG Main  
ABS/VSA FSR  
ISA*  
Amps  
30 A  
(30 A)  
30 A  
(15 A)  
–
EPS  
70 A  
50 A*  
30 A*  
3
4*2  
5
6
7
1
IG Main  
2
1
2
Fuse Box Main 2  
ABS/VSA Motor  
50 A  
40 A  
–
Fuse Box Main 1  
Fuse Box Main 3  
30 A  
40 A  
8
9
Super Lock*  
Small Light  
Centre Accessory Socket* (20 A)  
Rear Demister  
Key ACC Lock  
Heated Door Mirror*  
A/C Blower SW  
Front Wiper  
(20 A)  
10 A  
–
–
–
–
–
–
–
–
–
–
–
–
10  
11  
12*1  
13  
14  
15*1  
30 A  
(7.5 A)  
(10 A)  
(7.5 A)  
(30 A)  
*1: Models without the keyless access system  
*2: Models with the keyless access system  
* Not available on all models  
Continued  
579  
18 FIT JAZZ-32T5A6100.book 580 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuFusesuFuse Locations  
Left-hand drive type  
Fuse locations are shown on the label.  
■ Circuit protected and fuse rating  
■ Type C  
Located near the steering column.  
Locate the fuse in question by the fuse  
number and label number.  
Circuit Protected  
Amps  
1
2
3
4
5
6
7
–
–
–
IG1-2  
Power Oil Pump  
–
–
7.5 A  
(10 A)  
–
7.5 A  
7.5 A  
15 A  
Fuse Label  
Accessory  
IG1-1  
Back Up  
580  
18 FIT JAZZ-32T5A6100.book 581 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuFusesuFuse Locations  
Right-hand drive type  
Passenger Side Interior Fuse Box  
■
Located behind the glove box.  
1. Open the glove box.  
Handle  
Pull  
2. Disengage the two tabs by pushing on each  
side panel.  
3. Pivot the glove box out of the way.  
Tabs  
Continued  
581  
18 FIT JAZZ-32T5A6100.book 582 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuFusesuFuse Locations  
Fuse locations are shown on the label.  
■ Circuit protected and fuse rating  
Locate the fuse in question by the fuse  
number and label number.  
Circuit Protected  
Amps  
1
2
3
4
5
6
7
–
–
–
IG1-2  
Power Oil Pump  
–
–
7.5 A  
(10 A)  
–
7.5 A  
7.5 A  
15 A  
Fuse Label  
Accessory  
IG1-1  
Back Up  
582  
18 FIT JAZZ-32T5A6100.book 583 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuFusesuInspecting and Changing Fuses  
Inspecting and Changing Fuses  
1. Turn the ignition switch to LOCK (0*1. Turn  
headlights and all accessories off.  
2. Remove the fuse box cover.  
3. Check the large fuses on the battery in the  
engine compartment.  
1Inspecting and Changing Fuses  
NOTICE  
Replacing a fuse with one that has a higher rating  
greatly increases the chances of damaging the  
electrical system.  
u If the fuse is blown, have it replaced by a  
Replace fuse with a spare fuse of the same specified  
amperage.  
dealer.  
Blown  
Use the charts to locate the fuse in question and  
confirm the specified amperage.  
2 Fuse Locations P. 573  
Fuse Box on the Battery  
4. Inspect the small fuses in the engine  
compartment and the vehicle interior.  
u If there is a blown fuse, remove it and  
replace it with a new one.  
5. Check the large fuse in the vehicle interior.  
Combined Fuse  
u If the fuse is blown, use a phillips-head  
screwdriver to remove the screw and  
replace it with a new one.  
Blown Fuse  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
583  
18 FIT JAZZ-32T5A6100.book 584 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
Emergency Towing  
Call a professional towing service if you need to tow your vehicle.  
1Emergency Towing  
NOTICE  
■ Flat bed equipment  
The operator loads your vehicle on the back of a truck.  
This is the best way to transport your vehicle.  
Trying to lift or tow your vehicle by the bumpers will  
cause serious damage. The bumpers are not designed  
to support the vehicle's weight.  
Improper towing such as towing behind a  
motorhome or other motor vehicle can damage the  
transmission.  
■ Wheel lift equipment  
The tow truck uses two pivoting arms that go under the front tyres and lift them off  
the ground. The rear tyres remain on the ground. This is an acceptable way to  
tow your vehicle.  
Never tow your vehicle with just a rope or chain.  
It is very dangerous, since ropes or chains may shift  
from side to side or break.  
584  
18 FIT JAZZ-32T5A6100.book 585 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuEmergency Towingu  
■ If your vehicle must be towed with the front wheels on the ground:  
1. Check the ground underneath the vehicle  
1
If your vehicle must be towed with the front wheels on the ground:  
Type A  
Towing a vehicle is prohibited by law in some  
countries.  
Cover  
around where the transmission housing is  
Check and follow the legal requirements of the  
country in which you are driving before towing your  
vehicle.  
for a fluid leak.  
u If you find a leak, call a professional  
towing service and have your vehicle  
inspected by a dealer.  
2. Put cloth on the edge of the cover.  
Carefully pry with a small flat-tip  
screwdriver or a metal fingernail file to  
If you cannot follow the exact procedure, do not tow  
your vehicle with the front wheels on the ground.  
If you cannot turn on the engine, you may experience  
the following while your vehicle is being towed.  
• Braking may become difficult since the brake  
system’s power assist is disabled.  
• Steering wheel becomes heavy as the power  
steering system is disabled.  
Type B  
remove the cover.  
u The detachable towing hook mounts on  
Cover  
the anchor in the front bumper.  
Manual transmission models  
• Turning the ignition switch to LOCK (0*1 locks the  
steering wheel.  
With the front wheels on the ground, it is best to tow  
the vehicle no farther than 80 km (50 miles), and  
keep the speed below 55 km/h (34 mph).  
Going down a long slope heats up the brakes. This  
may prevent the brakes from working properly. If  
your vehicle needs to be towed on an incline, call a  
professional towing service.  
Make sure to use the properly-designed and attached  
towing equipment.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
Continued  
585  
18 FIT JAZZ-32T5A6100.book 586 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuEmergency Towingu  
Models with a compact spare tyre  
Models with a compact spare tyre  
1
If your vehicle must be towed with the front wheels on the ground:  
3. Take the towing hook and the wheel nut  
wrench out of the luggage area.  
Wheel Nut  
Wrench  
NOTICE  
Continuously variable transmission models  
If you cannot shift the transmission or turn on the  
engine, will damage the transmission. Your vehicle  
must be transported with the front wheels off the  
ground.  
Models with temporary tyre repair kit  
3. Take the towing hook and the jack handle  
bar out of the luggage area.  
All models  
4. Screw the towing hook into the hole, and  
tighten it with the wheel nut wrench* or  
the jack handle bar* securely.  
5. Hook the towing device to the towing  
hook.  
Towing Hook  
Models with temporary tyre repair kit  
Jack Handle  
Bar  
6. Start the engine.  
u If it is difficult to turn on the engine, put  
the ignition switch in ACCESSORY (q or  
ON (w*1.  
Manual transmission models  
7. Shift to (N.  
Towing Hook  
Continuously variable transmission models  
7. Depress the brake pedal.  
8. Shift to (D and hold for five seconds, then  
to (N.  
All models  
9. Release the parking brake.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
* Not available on all models  
586  
18 FIT JAZZ-32T5A6100.book 587 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
When You Cannot Open the Tailgate  
1What to Do When Unable to Open the Tailgate  
What to Do When Unable to Open the Tailgate  
■
Following up:  
After taking these steps, contact a dealer to have  
your vehicle checked.  
If you cannot open the tailgate, use the following procedure.  
1. Wrap a cloth around the flat-tip  
screwdriver. Put it into the lid as shown in  
the image, and open the lid.  
When you open the tailgate from inside, make sure  
there is enough space around the tailgate, and it  
does not hit anyone or any object.  
Lid  
Models with keyless access system  
2. To open the tailgate, push the tailgate  
while sliding the lever to the right.  
Lever  
Continued  
587  
18 FIT JAZZ-32T5A6100.book 588 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuWhen You Cannot Open the Tailgateu  
Models without keyless access system  
2. Slide the lever to unlock the tailgate.  
3. Open the tailgate.  
Lever  
588  

Related Topics

Tools If a Tyre Goes Flat Engine Does Not Start Jump Starting Shift Lever Does Not Move Overheating Indicator, Coming On/Blinking Fuses Emergency Towing When You Cannot Open the Tailgate

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot