2016-2020 Honda Jazz 4 Door Handling the Unexpected -> If a Tyre Goes Flat User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Handling the Unexpected -> If a Tyre Goes Flat for Your Honda Jazz 4 Door Third Generation (2016-2020)

18 FIT JAZZ-32T5A6100.book 541 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
If a Tyre Goes Flat  
Changing a Flat Tyre*  
*
If a tyre goes flat while driving, grasp the steering wheel firmly, and brake gradually  
to reduce speed. Then, stop in a safe place. Replace the flat tyre with a compact  
spare tyre. Go to a dealer as soon as possible to have the full-size tyre repaired or  
replaced.  
1Changing a Flat Tyre  
Follow compact spare precautions:  
Periodically check the tyre pressure of the compact  
spare. It should be set to the specified pressure.  
Specified Pressure: 420 kPa (4.2 kgf/cm2, 60 psi)  
1. Park the vehicle on firm, level, and non-slippery surface and apply the parking  
brake.  
When driving with the compact spare tyre, keep the  
vehicle speed under 80 km/h (50 mph). Replace with  
a full-size tyre as soon as possible.  
Continuously variable transmission models  
2. Move the shift lever to (P.  
The compact spare tyre and wheel in your vehicle are  
specifically for this model.  
Do not use them with another vehicle.  
Do not use another type of compact spare tyre or  
wheel with your vehicle.  
Manual transmission models  
2. Move the shift lever to (R.  
All models  
3. Turn on the hazard warning lights and turn the ignition switch to LOCK (0*1.  
Do not mount tyre chains on a compact spare tyre.  
If a chain-mounted front tyre goes flat, remove one of  
the full-size rear tyres and replace it with the compact  
spare tyre. Remove the flat front tyre and replace it with  
the full-size tyre that was removed from the rear. Mount  
the tyre chains on the front tyre.  
A compact spare tyre gives a harsher ride and less  
traction on some road surfaces. Use greater caution  
while driving.  
Do not use more than one compact spare tyre at the  
same time.  
The compact spare tyre is smaller than the regular  
tyre. Your vehicle’s ground clearance reduces when  
the compact spare tyre is installed. Driving over road  
debris or bumps could possibly damage the  
underside of your vehicle.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
* Not available on all models  
Continued  
541  
18 FIT JAZZ-32T5A6100.book 542 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuIf a Tyre Goes FlatuChanging a Flat Tyre  
*
1Changing a Flat Tyre  
Getting Ready to Replace the Flat Tyre  
■
WARNING: The jack can only be used for helping an  
emergency vehicle breakdown, not for changing the  
regular seasonal tyre or any other normal  
maintenance or repair operation.  
1. Open the luggage area floor lid.  
Floor Lid  
NOTICE  
Do not use the jack if it doesn’t work properly. Call  
your dealer or a professional towing service.  
2. Take the tool case out of the luggage area.  
3. Take the wheel nut wrench, jack handle bar  
and jack out of the tool case.  
Spare Tyre  
Jack  
4. Unscrew the wing bolt, and remove the  
spacer cone. Then, remove the spare tyre.  
Tool Case  
5. Place a wheel block or rock in front and rear  
of the wheel diagonal to the flat tyre.  
Wheel  
Blocks  
The tyre to be replaced.  
* Not available on all models  
542  
18 FIT JAZZ-32T5A6100.book 543 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuIf a Tyre Goes FlatuChanging a Flat Tyre  
6. Place the compact spare tyre (wheel side  
up) under the vehicle body, near the tyre  
that needs to be replaced.  
1Getting Ready to Replace the Flat Tyre  
Be careful not to hurt yourself when removing or  
storing the spare tyre.  
Models with wheel cover  
Jack Handle Bar  
7. Put the flat tip of the jack handle bar into  
the edge of the wheel cover. Carefully pry  
the edge and remove the cover.  
u Wrap a cloth around the flat tip of the  
jack handle bar to prevent scratches on  
the cover.  
Wheel  
Cover  
Wheel Nut  
All models  
8. Loosen each wheel nut about one turn  
using the wheel nut wrench.  
Continued  
543  
18 FIT JAZZ-32T5A6100.book 544 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuIf a Tyre Goes FlatuChanging a Flat Tyre  
1How to Set Up the Jack  
How to Set Up the Jack  
■
1. Place the jack under the jacking point  
closest to the tyre to be changed.  
3WARNING  
The vehicle can easily roll off the jack,  
seriously injuring anyone underneath.  
Follow the directions for changing a tyre  
exactly, and no person should place any  
portion of their body under a vehicle that is  
supported by a jack.  
WARNING: The jack shall be placed on a flat and  
stable surface on the same level as the vehicle is  
parked.  
2. Turn the end bracket clockwise as shown in  
the image until the top of the jack contacts  
the jacking point.  
u Make sure that the jacking point tab is  
resting in the jack notch.  
The jack that came with your vehicle has the  
following label.  
1. See Owner’s Manual.  
2. Never get under vehicle when supported by jack.  
3. Place jack underneath reinforced area.  
544  
18 FIT JAZZ-32T5A6100.book 545 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuIf a Tyre Goes FlatuChanging a Flat Tyre  
3. Raise the vehicle, using the jack handle bar  
and the jack handle, until the tyre is off the  
ground.  
1How to Set Up the Jack  
Do not use the jack with people or luggage in the  
vehicle.  
Use the jack provided in your vehicle.  
Other jacks may not support the weight (“load”) or  
may not fit the jacking point.  
Jack  
Handle  
Bar  
Wheel Nut  
Wrench as Jack Handle  
The following instructions must be followed to use  
the jack safely:  
• Do not use while the engine is running.  
• Use only where the ground is firm and level.  
• Use only at the jacking points.  
• Do not get in the vehicle while using the jack.  
• Do not put anything on top of or underneath the  
jack.  
Loose items can fly around the interior in a crash and  
can seriously injure the occupants.  
Store the wheel, jack, and tools securely before  
driving.  
Continued  
545  
18 FIT JAZZ-32T5A6100.book 546 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuIf a Tyre Goes FlatuChanging a Flat Tyre  
1Replacing the Flat Tyre  
Replacing the Flat Tyre  
■
Do not over tighten the wheel nuts by applying extra  
torque using your foot or a pipe.  
1. Remove the wheel nuts and flat tyre.  
Wheel  
Nut  
Models with wheel cover  
Make sure the wire support ring is hooked into the  
clips around the edge of the wheel cover.  
2. Wipe the mounting surfaces of the wheel  
with a clean cloth.  
3. Mount the compact spare tyre.  
4. Screw the wheel nuts until they touch the  
lips around the mounting holes, and stop  
rotating.  
Clips  
Clips  
Align the valve mark on the wheel cover to the tyre  
valve on the wheel, then install the wheel cover.  
Valve Mark  
Wheel cover  
5. Lower the vehicle and remove the jack.  
Tighten the wheel nuts in the order  
indicated in the image. Go around,  
tightening the nuts, two to three times in  
this order.  
Wheel nut torque:  
108 N∙m (11 kgf∙m, 80 lbf∙ft)  
546  
18 FIT JAZZ-32T5A6100.book 547 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuIf a Tyre Goes FlatuChanging a Flat Tyre  
1Storing the Flat Tyre  
Storing the Flat Tyre  
■
Models with aluminium wheels  
3
WARNING  
Centre Cap  
1. Remove the centre cap.  
Loose items can fly around the interior in a  
crash and can seriously injure the  
occupants.  
Store the wheel, jack, and tools securely  
before driving.  
Models with wheel cover  
Models with a compact spare tyre  
2. Remove the spacer cone from the wing  
bolt, flip it over, and insert it back on the  
bolt.  
Wing Bolt  
Make sure the wire support ring is on the outer side  
of the tyre valve as shown.  
For full-size  
tyre  
Spacer  
Cone  
Tyre Valve  
All models  
3. Place the flat tyre face down in the spare  
tyre well.  
4. Secure the flat tyre with the wing bolt.  
5. Securely put the jack and wheel nut wrench  
back in the tool case.  
For compact  
spare tyre  
Wire Support Ring  
6. Store the case in the luggage area.  
Continued  
547  
18 FIT JAZZ-32T5A6100.book 548 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
*
uuIf a Tyre Goes FlatuChanging a Flat Tyre  
Deflation Warning System and the Spare Tyre  
■
If you replace a flat tyre with the spare tyre,  
indicator comes on while you are  
driving. After driving for a few kilometres (miles), the indicator will start blinking for  
a short time and then stay on, but this is normal.  
Calibrate the deflation warning system when you replace the tyre with a specified  
regular tyre.  
2 Deflation Warning System Calibration P. 449  
548  
18 FIT JAZZ-32T5A6100.book 549 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
Temporarily Repairing a Flat Tyre  
If the tyre has a large cut or is otherwise severely damaged, you will need to have  
the vehicle towed. If the tyre only has a small puncture, from a nail for instance, you  
can use the temporary tyre repair kit so that you can drive to the nearest service  
station for a permanent repair.  
1Temporarily Repairing a Flat Tyre  
The kit should not be used in the following situations.  
Instead, contact a dealer or a roadside assistant to  
have the vehicle towed.  
• The tyre sealant has expired.  
• More than one tyre is punctured.  
• The puncture or cut is greater than 4 mm (3/16  
inch).  
If a tyre goes flat while driving, grasp the steering wheel firmly, and brake gradually  
to reduce speed. Then stop in a safe place.  
• The tyre side wall is damaged or the puncture is  
outside the tyre area.  
1. Park the vehicle on firm, level, and non-slippery ground and apply the parking  
brake.  
Continuously variable transmission models  
2. Move the shift lever to (P.  
Manual transmission models  
Contact Area  
2. Move the shift lever to (R.  
All models  
3. Turn on the hazard warning lights and turn the ignition switch to LOCK (0*1.  
u When towing a trailer, unhitch the trailer.  
When the puncture is:  
Smaller than 4 mm (3/16 inch)  
Larger than 4 mm (3/16 inch)  
Kit Use  
Yes  
No  
• Damage has been caused by driving with the tyres  
extremely under inflated.  
• The tyre bead is no longer seated.  
• The rim is damaged.  
Do not remove a nail or screw that punctured the  
tyre. If you remove it from the tyre, you may not be  
able to repair the puncture using the kit.  
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an ignition  
switch.  
Continued  
549  
18 FIT JAZZ-32T5A6100.book 550 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
1Getting Ready to Temporarily Repair the Flat Tyre  
Getting Ready to Temporarily Repair the Flat Tyre  
■
When making a temporary repair, carefully read the  
instruction manual provided with the kit.  
Air Compressor  
The “Tyre Sealant  
in the Tyre” Sticker  
Sealant Bottle  
Handling Manual  
Expiration  
Date  
The “Maximum Speed” Sticker  
1. Open the luggage area floor lid, then take  
the kit out of the tool box.  
Floor Lid  
2. Place the kit, face up, on flat ground near  
the flat tyre, away from traffic. Do not place  
the kit on its side.  
Tyre Repair Kit  
550  
18 FIT JAZZ-32T5A6100.book 551 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
1Injecting the Sealant and Air in the Tyre  
Injecting the Sealant and Air in the Tyre  
■
1. Take the air compressor hose and plug  
cord out of the back of the air compressor.  
3WARNING  
Tyre sealant contains substances that are  
harmful and can be fatal if swallowed.  
Plug Cord  
Air Compressor  
Hose  
If accidentally swallowed, do not induce  
vomiting. Drink plenty of water and get  
medical attention immediately.  
For skin or eye contact, flush with cool  
water and get medical attention if  
necessary.  
2. Remove the cap from the air compressor.  
Keep the sealant bottle out of the reach of children.  
In cold temperatures, the sealant may not flow easily.  
In this situation, warm it by keeping the bottle in the  
passenger compartment before using.  
The sealant can permanently stain clothing and other  
materials. Be careful during handling and wipe away  
any spills immediately.  
3. Shake the bottle well.  
Continued  
551  
18 FIT JAZZ-32T5A6100.book 552 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
4. Remove the bottle cap.  
1Injecting the Sealant and Air in the Tyre  
Bottle Cap  
u Do not remove the sealed cover.  
Do not remove the empty bottle after injecting the  
sealant.  
Not  
Removed  
See a Honda dealer for a replacement of sealant  
bottle and proper disposal of the empty bottle.  
5. Screw the sealed bottle onto the air  
compressor.  
u Screw the bottle tightly so that it does  
not become loose.  
6. Unscrew the valve cap.  
Valve Cap  
Valve  
552  
18 FIT JAZZ-32T5A6100.book 553 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
7. Screw the air compressor hose onto the  
1Injecting the Sealant and Air in the Tyre  
Air Compressor Hose  
tyre valve.  
Air  
Valve  
3
WARNING  
u Make sure the air valve is closed and the  
air compressor is turned off.  
Running the engine with the vehicle in an  
enclosed or even partly enclosed area can  
cause a rapid build-up of toxic carbon  
monoxide.  
Breathing this colourless, odourless gas can  
cause unconsciousness and even death.  
Only run the engine to power the air  
compressor with the vehicle outdoors.  
Valve  
8. Plug in the compressor to the accessory  
power socket.  
Plug  
2 Accessory Power Socket(s) P. 205  
9. Start the engine.  
2 Carbon Monoxide Gas P. 82  
Turn the air compressor off when connecting the air  
compressor hose.  
You hear a motor sound coming from the activated  
air compressor. This is normal.  
Accessory Power Socket  
If the specified air pressure is not reached within 10  
minutes, the tyre may be too severely damaged for  
the kit to provide the necessary seal and your vehicle  
will need to be towed.  
If you want to measure the air pressure using a  
gauge, turn the air compressor off first.  
Continued  
553  
18 FIT JAZZ-32T5A6100.book 554 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
10. Turn on the air compressor and inflate the  
1Injecting the Sealant and Air in the Tyre  
Air Valve  
tyre to the specified air pressure.  
u The compressor starts injecting sealant  
Inform the use of tyre sealant when you ask a Honda  
dealer or the road assistant service for replacing or  
repairing the flat tyre.  
Switch  
and air into the tyre.  
u Refer to the driver’s doorjamb label for  
This air compressor is designed for the automotive  
tyre. Check the following:  
the specified pressure.  
11. After the air pressure reaches to specified  
pressure, turn off the compressor.  
u Check the air pressure gauge on the air  
compressor.  
ON  
• The power supply of the air compressor is limited to  
your vehicle’s 12-volt DC accessory power socket.  
• Do not operate the temporary tyre repair kit  
compressor for more than 15 minutes. The  
compressor can overheat and become permanently  
damaged.  
OFF  
u If overinflated, release the air by turning  
the air valve. Be careful not to spill any  
sealant.  
Make it cool down when using the compressor  
continuously.  
12. Unplug the plug from the accessory power  
socket.  
13. Unscrew the air compressor hose from the  
tyre valve. Install the hose cap.  
u Be careful not to spill any sealant when  
the hose is disconnected. Wipe away  
any spills.  
14. Apply the wheel label to the flat surface of  
the wheel.  
Wheel Label  
u The wheel surface must be clean to  
ensure the label adheres properly.  
15. Store the tyre repair kit in the luggage  
area.  
u Do not remove the sealant bottle from  
the air compressor.  
554  
18 FIT JAZZ-32T5A6100.book 555 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
1Distributing the Sealant in the Tyre  
Distributing the Sealant in the Tyre  
■
1. Apply the speed limit label to the location  
as shown.  
3
WARNING  
Running the engine with the vehicle in an  
enclosed or even partly enclosed area can  
cause a rapid build-up of toxic carbon  
monoxide.  
2. Drive the vehicle for about 10 minutes or  
three to ten kilometres (two to six miles).  
u Do not exceed 80 km/h (50 mph).  
3. Stop the vehicle in a safe place.  
4. Recheck the air pressure using the gauge  
on the air compressor.  
Breathing this colourless, odourless gas can  
cause unconsciousness and even death.  
Only run the engine to power the air  
compressor with the vehicle outdoors.  
Speed Limit Label  
u Do not turn the air compressor on to  
check the pressure.  
Refer to the driver’s doorjamb label for the specified  
pressure.  
Continued  
555  
18 FIT JAZZ-32T5A6100.book 556 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
5. If the air pressure is  
1Distributing the Sealant in the Tyre  
Air  
Compressor  
• Less than 130 kPa (19 psi): Do not add  
air and continue driving. The leak is too  
severe. Call for help and have your  
vehicle towed.  
Make sure to store the air compressor with the empty  
bottle in the luggage area.  
2 Emergency Towing P. 584  
• Specified air pressure (See the label on  
driver’s doorjamb.) or more: Continue  
driving until you reach the nearest  
service station. Do not exceed 80 km/h  
(50 mph).  
ON  
OFF  
• Greater than 130 kPa (19 psi), but less  
than specified air pressure (See the label  
on driver’s doorjamb.): Inflate the tyre to  
the specified air pressure.  
2 Inflating an Under-inflated Tyre  
P. 557  
And repeat steps 2 to 4 until you reach the  
nearest service station. Do not exceed 80  
km/h (50 mph).  
u The distance to the nearest service  
station has to be within about 200  
kilometres (120 miles).  
6. Repackage and properly stow the kit.  
556  
18 FIT JAZZ-32T5A6100.book 557 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
1Inflating an Under-inflated Tyre  
Inflating an Under-inflated Tyre  
■
You can use the kit to inflate a non-punctured under-inflated tyre.  
1. Take the air compressor out of the  
3
WARNING  
Hose  
Running the engine with the vehicle in an  
enclosed or even partly enclosed area can  
cause a rapid build-up of toxic carbon  
monoxide.  
Air  
Valve  
luggage area.  
2. Place the kit, face up, on flat ground near  
the tyre to inflate, away from traffic. Do  
not place the kit on its side.  
3. Remove the valve cap.  
4. Attach the hose onto the tyre valve. Screw  
it until it is tight.  
Breathing this colourless, odourless gas can  
cause unconsciousness and even death.  
Only run the engine to power the air  
compressor with the vehicle outdoors.  
u Make sure the air valve is closed.  
5. Plug in the compressor to the accessory  
power socket.  
u Be careful not to pinch the cord in a  
door or window.  
You hear a motor sound coming from the activated  
air compressor. This is normal.  
Plug  
2 Accessory Power Socket(s) P. 205  
6. Start the engine.  
2 Carbon Monoxide Gas P. 82  
Accessory Power Socket  
Continued  
557  
18 FIT JAZZ-32T5A6100.book 558 ページ ２０１７年８月２３日　水曜日　午前１１時２４分  
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre  
7. Turn on the air compressor and inflate the  
tyre to the specified air pressure (See the  
label on driver’s doorjamb.)  
8. Turn off the air compressor.  
1Inflating an Under-inflated Tyre  
Air Valve  
This air compressor is designed for the automotive  
tyre. Check the following:  
Switch  
• The power supply of the air compressor is limited to  
your vehicle’s 12-volt DC accessory power socket.  
• Do not operate the temporary tyre repair kit  
compressor for more than 15 minutes. The  
compressor can overheat and become permanently  
damaged.  
u Check the air pressure gauge on the air  
compressor.  
u If overinflated, turn the air valve to  
deflate.  
ON  
OFF  
9. Turn off the engine, then unplug the air  
compressor from the accessory power  
socket.  
10. Unscrew the air compressor hose from the  
tyre valve. Reinstall the valve cap.  
11. Store the air compressor in the luggage  
area.  
Make it cool down when using the compressor  
continuously.  
If you want to measure the air pressure using a  
gauge, turn the air compressor off first.  
558  

Related Topics

Handling the Unexpected
Tools Engine Does Not Start Jump Starting Shift Lever Does Not Move Overheating Indicator, Coming On/Blinking Fuses Emergency Towing When You Cannot Open the Tailgate

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot