Get Safety features of your vehicle -> CHILD RESTRAINT SYSTEM (CRS) Guide for Hyundai I10 4 Door Second Generation (2013-2019)

Safety system of your vehicle

CHILD RESTRAINT SYSTEM (CRS)

WARNING

Most countries have child restraint laws

which require children to travel in

approved child restraint devices. The

laws governing the age or height/weight

restrictions at which seat belts can be

used instead of child restraints differs

among countries, so you should be

aware of the specific requirements in

your country, and where you are travel-

ling.

Child Restraint System (CRS)

Infants and younger children must be

restrained in an appropriate rear-facing

or forward-facing CRS that has first been

properly secured to the rear seat of the

vehicle. Read and comply with the

instructions for installation and use pro-

vided by the manufacturer of the child

restraint.

Always properly restrain children in

the rear seats of the vehicle.

Children of all ages are safer when

restrained in the rear seat. A child

riding in the front passenger seat

can be forcefully struck by an inflat-

ing air bag resulting in SERIOUS

INJURY or DEATH.

Child restraint systems must be properly

placed and installed in the rear seat. You

must use a commercially available child

restraint system that meets the require-

ments of the Safety Standards of your

country.

WARNING

An improperly secured child

restraint can increase the risk of

SERIOUS INJURY or DEATH in an

accident. Always take the following

precautions when using a child

restraint system:

Children under age 13 must always ride

in the rear seats and must always be

properly restrained to minimize the risk of

injury in an accident, sudden stop or sud-

den maneuver. According to accident

statistics, children are safer when proper-

ly restrained in the rear seats than in the

front seat. Even with air bags, children

can be seriously injured or killed.

Children too large for a child restraint

must use the seat belts provided.

Child restraint systems are generally

designed to be secured in a vehicle seat

by lap belt or the lap belt portion of a

lap/shoulder belt in the rear seats of the

vehicle.

• NEVER install a child or infant

restraint in the front passenger’s

seat.

• Always properly secure the child

restraint to a rear seat of the vehi-

cle.

• Always follow the child restraint

system manufacturer’s instruc-

tions for installation and use.

(Continued)

3 21

Safety system of your vehicle

Child restraint system types

Selecting a Child Restraint

System (CRS)

When selecting a CRS for your child,

always:

• Make sure the CRS has a label certify-

ing that it meets applicable Safety

Standards of your country.

• Select a child restraint system based

on your child’s height and weight. The

required label or the instructions for

use typically provide this information.

• Select a child restraint system that fits

the vehicle seating position where it

will be used.

• Read and comply with the warnings

and instructions for installation and use

provided with the child restraint system.

(Continued)

• Always properly restrain your

child in the child restraint.

There are three main types of child

restraint systems: rear-facing seats, for-

ward-facing seats, and booster seats.

They are classified according to the

child’s age, height and weight.

• Do not use an infant carrier or a

child safety seat that "hooks“ over

a seatback, it may not provide ade-

quate protection in an accident.

• After an accident, we recommend

a HYUNDAI dealer check the child

restraint system, seat belts,

ISOFIX lower anchorages and top-

tether anchorages.

Rear-facing child seats

WARNING

NEVER install a child or infant

restraint in the front passenger’s

seat.

Placing a rear-facing child restraint

in the front seat can result in SERI-

OUS INJURY or DEATH if the child

restraint is struck by an inflating air

bag.

3 22

Safety system of your vehicle

Continue to use a rear-facing child seat

for as long as your child will fit within the

height and weight limits allowed by the

child seat manufacturer. It’s the best way

to keep them safe. Once your child has

outgrown the rear-facing child restraint,

your child is ready for a forward-facing

child restraint with a harness.

CRS09

OUN026150

A rear-facing child seat provides restraint

with the seating surface against the back

of the child. The harness system holds

the child in place, and in an accident,

acts to keep the child positioned in the

seat and reduce the stress to the neck

and spinal cord.

Forward-facing child seats

A forward-facing child seat provides

restraint for the child’s body with a har-

ness. Keep children in a forward-facing

child seat with a harness until they reach

the top height or weight limit allowed by

your child restraint’s manufacturer.

All children under age one must always

ride in a rear-facing infant child restraint.

Convertible and 3-in-1 child seats typi-

cally have higher height and weight limits

for the rear-facing position, allowing you

to keep your child rear-facing for a longer

period of time.

Once your child outgrows the forward-

facing child restraint, your child is ready

for a booster seat.

3 23

Safety system of your vehicle

Booster seats

After selecting a proper child seat for

your child, check to make sure it fits prop-

erly in your vehicle. Follow the instruc-

tions provided by the manufacturer when

installing the child seat. Note these gen-

eral steps when installing the seat to your

vehicle:

• Properly secure the child restraint

system to the vehicle. All child seats

must be secured to the vehicle with the

lap belt or lap part of a lap/shoulder belt.

• Make sure the child restraint system

is firmly secured. After installing a

child seat to the vehicle, push and pull

the seat forward and from side-to-side

to verify that it is securely attached to

the seat. A child seat secured with a

seat belt should be installed as firmly

as possible. However, some side-to-

side movement can be expected.

Installing a Child Restraint

System (CRS)

A booster seat is a restraint designed to

improve the fit of the vehicle’s seat belt

system. A booster seat positions the seat

belt so that it fits properly over the lap of

your child. Keep your child in a booster

seat until they are big enough to sit in the

seat without a booster and still have the

seat belt fit properly.

WARNING

Before installing your child

restraint system always:

• Read and follow the instructions

provided by the manufacturer of

the child restraint.

• Read and follow the instructions

regarding child restraint systems

in this manual.

Failure to follow all warnings and

instructions could increase the

risk of the SERIOUS INJURY or

DEATH if an accident occurs.

For a seat belt to fit properly, the lap belt

must lie snugly across the upper thighs,

not the stomach. The shoulder belt

should lie snug across the shoulder and

chest and not across the neck or face.

Children under age 13 must always ride

in the rear seats and must always be

properly restrained to minimize the risk of

injury.

WARNING

A child restraint system in a closed

vehicle can become very hot. To

prevent burns, check the seating

surface and buckles before placing

your child in the child restraint.

3 24

Safety system of your vehicle

Securing a child restraint system

with a lap belt or lap/shoulder belt

All child restraint system must be secured

to a vehicle rear seat with the lap belt or

the lap part of a lap/shoulder belt.

4.Push and pull on the child restraint

system to confirm that the seat belt is

holding it firmly in place.

To remove the child restraint system,

press the release button on the buckle

and then pull the lap belt out of the

restraint.

WARNING

ALWAYS place a rear-facing child

restraint system in the rear seat of

the vehicle.

Placing a rear-facing child restraint

system in the front seat can result in

serious injury or death if the child

restraint system is struck by an

inflating air bag.

1GHA2260

Installing a child restraint system with a

lap belt

To install a child restraint system on the

center rear seats, do the following:

1.Place the child restraint system on the

center rear seat and route the lap belt

through the restraint, following the

restraint manufacturer’s instructions.

Be sure the seat belt webbing is not

twisted.

2. Fasten the lap belt latch into the buck-

le. Listen for the distinct “click” sound.

3. Adjust the lap belt for a snug hold on

the child restraint system by pulling the

loose end of the belt.

3 25

Safety system of your vehicle

E2MS103005

OEN036101

OEN036104

Installing a child restraint system with a

lap/shoulder belt

To install a child restraint system on the

rear seats, do the following:

3.Remove as much slack from the belt

as possible by pushing down on the

child restraint system while feeding the

shoulder belt back into the retractor.

2. Fasten the lap/shoulder belt latch into

the buckle. Listen for the distinct “click”

sound.

4.Push and pull on the child restraint

system to confirm that the seat belt is

holding it firmly in place.

To remove the child restraint system,

press the release button on the buckle

and then pull the lap/shoulder belt out of

the restraint and allow the seat belt to

retract fully.

1.Place the child restraint system on a

rear seat and route the lap/shoulder

belt around or through the restraint, fol-

lowing the restraint manufacturer’s

instructions.

Be sure the seat belt webbing is not

twisted.

✽

NOTICE

Position the release button so that it is

easy to access in case of an emergency.

3 26

Safety features of your vehicle -> CHILD RESTRAINT SYSTEM (CRS) for Your Hyundai I10 4 Door Second Generation (2013-2019)

Related Topics

Safety features of your vehicle

Popular Owner Manuals

Latest Owner Manuals