Get Safety system of your vehicle -> Seat Guide for Hyundai I30 4 Door Third Generation (2016-2026)

Safety system of your vehicle

SEAT

Front seat

(1) Forward and backward (driver seat)

(2) Seatback angle (driver seat)

(3) Seat cushion height (driver seat)*

(4) Lumbar support (driver seat)*

(5) Headrest (driver seat)

(6) Forward and backward (passenger

seat)

(7) Seatback angle (passenger seat)

(8) Headrest (passenger seat)

Rear seats

(9) Centre armrest*

(10) Headrest (outboard and/or centre*)

(11) Seatback folding lever

* : if equipped

OFD037001EA

C010000AFD-EA

3 2

Safety system of your vehicle

WARNING - Loose objects

WARNING - Driver respon-

sibility for front seat pas-

senger

WARNING - Driver’s seat

• Never attempt to adjust seat

while the vehicle is moving. This

could result in loss of control,

and an accident causing death,

serious injury, or property dam-

age.

• Do not allow anything to interfere

with the normal position of the

seatback. Storing items against a

seatback or in any other way

interfering with proper locking of

a seatback could result in serious

or fatal injury in a sudden stop or

collision.

Loose objects in the driver’s foot

area could interfere with the opera-

tion of the foot pedals, possibly

causing an accident. Do not place

anything under the front seats.

Riding in a vehicle with a front seat-

back reclined could lead to serious

or fatal injury in an accident. If a

front seat is reclined during an

accident, the occupant’s hips may

slide under the lap portion of the

seat belt applying great force to the

unprotected abdomen. Serious or

fatal internal injuries could result.

The driver must advise the front

passenger to keep the seatback in

an upright position whenever the

vehicle is in motion.

WARNING - Uprighting

seat

When you return the seatback to its

upright position, hold the seatback

and return it slowly and be sure

there are no other occupants

around the seat. If the seatback is

returned without being held and

controlled, the back of the seat

could spring forward resulting in

accidental injury to a person struck

by the seatback.

• Always drive and ride with your

seatback upright and the lap por-

tion of the seat belt snug and low

across the hips. This is the best

position to protect you in case of

an accident.

• In order to avoid unnecessary

and perhaps severe air bag

injuries, always sit as far back as

possible from the steering wheel

while maintaining comfortable

control of the vehicle. It is recom-

mended that your chest is at least

250 mm (10 inches) away from

the steering wheel.

3 3

Safety system of your vehicle

WARNING

After adjusting the seat, always

check that it is securely locked into

place by attempting to move the

seat forward or reverse without

using the lock release lever.

Sudden or unexpected movement

of the driver's seat could cause you

to lose control of the vehicle result-

ing in an accident.

OFD037003M

OFD037002M

C010102AUN

Front seat adjustment

Seatback angle

To recline the seatback:

C010101AUN

Forward and backward

1. Lean forward slightly and lift up on the

seatback recline lever located on the

outside of the seat at the rear.

2. Carefully lean back on the seat and

adjust the seatback of the seat to the

position you desire.

3. Release the lever and make sure the

seatback is locked in place. (The lever

MUST return to its original position for

the seatback to lock.)

To move the seat forward or backward:

1. Pull the seat slide adjustment lever

under the front edge of the seat cush-

ion up and hold it.

2. Slide the seat to the position you

desire.

3. Release the lever and make sure the

seat is locked in place.

Adjust the seat before driving, and make

sure the seat is locked securely by trying

to move forward and backward without

using the lever. If the seat moves, it is not

locked properly.

3 4

Safety system of your vehicle

C010104AFD

Headrest

The driver's and front passenger's seats

are equipped with a headrest for the

occupant's safety and comfort.

The headrest not only provides comfort

for the driver and front passenger, but

also helps to protect the head and neck

in the event of a collision.

WARNING

• For maximum effectiveness in case

of an accident, the headrest should

be adjusted so the middle of the

headrest is at the same height of

the center of gravity of an occu-

pant's head. Generally, the center of

gravity of most people's head is

similar with the height of the top of

their eyes. Also, adjust the headrest

as close to your head as possible.

For this reason, the use of a cush-

ion that holds the body away from

the seatback is not recommended.

• Do not operate the vehicle with the

headrests removed as severe

injury to the occupants may occur

in the event of an accident.

Headrests may provide protection

against neck injuries when proper-

ly adjusted.

OFD037004M

B083D01NF-E

C010103AUN

Active headrest (if equipped)

Seat cushion height (for driver’s seat)

(if equipped)

To change the height of the seat cushion,

push the lever that is located on the out-

side of the seat cushion upwards or

downwards.

• To lower the seat cushion, push down

the lever several times.

• To raise the seat cushion, pull up the

lever several times.

The active headrest is designed to move

forward and upward during a rear impact.

This helps to prevent the driver's and

front passenger’s head from moving

backward and thus helps prevent neck

injuries.

WARNING

A gap between the seat and the

headrest release button may

appear when seating on the seat or

when you push or pull the seat. Be

careful not to get your finger, etc.

caught in the gap.

• Do not adjust the headrest position

of the driver's seat while the vehicle

is in motion.

3 5

Safety system of your vehicle

OFD037039

OFD037037

OFD039038

Forward and backward adjustment

(if equipped)

Adjusting the height up and down

Removal

To raise the headrest, pull it up to the

desired position (1). To lower the head-

rest, push and hold the release button (2)

on the headrest support and lower the

headrest to the desired position (3).

To remove the headrest, raise it as far as

it can go then press the release button (1)

while pulling upward (2).

The headrest may be adjusted forward to

3 different positions by pulling the head-

rest forward to the desired detent. To

adjust the headrest to it’s furthest back-

wards position, pull it fully forward to the

farthest position and release it. Adjust the

headrest so that it properly supports the

head and neck.

To reinstall the headrest, put the head-

rest poles (3) into the holes while press-

ing the release button (1). Then adjust it

to the appropriate height.

WARNING

Make sure the headrest locks in

position after adjusting it to proper-

ly protect the occupants.

3 6

Safety system of your vehicle

Rear seat adjustment

C010303AFD

Headrest

The rear seat is equipped with headrests

in all the seating positions for the occu-

pant's safety and comfort.

The headrest not only provides comfort for

passengers, but also helps to protect the

head and neck in the event of a collision.

WARNING

OFD037005R

OFD037040

• For maximum effectiveness in

case of an accident, the headrest

should be adjusted so the middle

of the headrest is at the same

height of the center of gravity of

an occupant's head. Generally, the

center of gravity of most people's

head is similar with the height of

the top of their eyes. Also, adjust

the headrest as close to your head

as possible. The use of a cushion

that holds the body away from the

seatback is not recommended.

• Do not operate the vehicle with

the headrests removed as severe

injury to an occupant may occur

in the event of an accident.

Headrests may provide protection

against severe neck injuries when

properly adjusted.

C010105AFD

C010108AUN

Lumbar support

(for driver’s seat, if equipped)

The lumbar support can be adjusted by

moving the lever on the outside of the dri-

ver’s seatback. Pivoting the lever increas-

es or decreases lumbar support.

Seatback pocket (if equipped)

The seatback pocket is provided on the

back of the front passenger’s and driver’s

seatbacks.

WARNING - Seatback

pockets

Do not put heavy or sharp objects

in the seatback pockets. In an acci-

dent they could come loose from

the pocket and injure vehicle occu-

pants.

3 7

Safety system of your vehicle

OHD036011

OHD039012

OFD037007

C010304AFD-EA

Adjusting the height up and down

Removal

Armrest (if equipped)

To use the armrest, pull it forward from

the seatback.

To raise the headrest, pull it up to the

desired position (1). To lower the head-

rest, push and hold the release button (2)

on the headrest support and lower the

headrest to the desired position (3).

To remove the headrest, raise it as far as

it can go then press the release button

(1) while pulling upward (2).

To reinstall the headrest, put the head-

rest poles (3) into the holes while press-

ing the release button (1). Then adjust it

to the appropriate height.

WARNING

Make sure the headrest locks in

position after adjusting it to proper-

ly protect the occupants.

3 8

Safety system of your vehicle

C010307BFD-EA

CAUTION

Folding the rear seat

• Make sure the engine is off, the

transaxle is in P and the hand

brake is applied whenever load-

ing or unloading cargo. Vehicle

may move if shift lever is inadver-

tently moved to another position.

The rear seatbacks (or cushions) may be

folded to facilitate carrying long items or

to increase the luggage capacity of the

vehicle.

WARNING

• Be careful when loading cargo

through the rear passenger seats

to prevent damage to the vehicle

interior.

• When cargo is loaded through the

rear passenger seats, ensure the

cargo is properly secured to pre-

vent it from moving while driving.

Unsecured cargo in the passen-

ger compartment can cause dam-

age to the vehicle or injury to it’s

occupants.

The purpose of the fold-down rear

seatbacks (or cushions) is to allow

you to carry longer objects than

could otherwise be accommodated.

OFD037008

To fold the rear seat cushion and back

- 5 Door

1. Set the front seatback to the upright

position and if necessary, slide the

front seat forward.

Never allow passengers to sit on

top of the folded down seatback

while the car is moving as this is

not a proper seating position and

no seat belts are available for use.

This could result in serious injury

or death in case of an accident or a

sudden stop. Objects carried on the

folded down seatback should not

extend higher than the top of the

front seats. This could allow cargo

to slide forward and cause injury or

damage during sudden stops.

2. Pull the cushion folding strap (1) and

lift the front portion of the seat cushion.

3 9

Safety system of your vehicle

OFD037009

OFD037010

OFD037012

OFD037034

OFD037011

OFD037035

3. Lift the rear portion of the seat cush-

ion. Stand the rear seat cushion verti-

cally.

4. Remove the headrest from the rear

seatback.

5. Stow the headrest by inserting the

headrest poles into the holder on the

bottom of the seat cushion.

6. Pull the lock release lever (red visible)

and fold the rear seatback forward and

down firmly.

7. To use the rear seat, lift and push the

seatback backward firmly until it clicks

into place. Make sure the seatback is

locked in place (red invisible).

8. Reposition the headrest on the seat-

back and adjust it to the desired posi-

tion.

3 10

Safety system of your vehicle

OFD037013

9. Return the seat cushion to the original

position by pushing down the rear side

of the seat cushion first. Make sure the

seat cushion is locked in place.

10. Return the rear seat belt to the prop-

er position.

OFD037051

OFD037052

- Wagon

2. To use the rear seat, lift and push the

seatback backward firmly until it clicks

into place. Make sure the seatback is

locked in place (red invisible).

3. Return the rear seat belt to the proper

position.

1. Pull the lock release lever (red visible)

and fold the rear seatback forward and

down firmly.

3 11

Safety system of your vehicle

WARNING

When you return the rear seatback

to its upright position after being

folded down:

WARNING - Cargo

Cargo should always be secured to

prevent it from being thrown about

the vehicle in a collision and caus-

ing injury to the vehicle occupants.

Special care should be taken of

objects placed in the rear seats,

since those may hit the front seat

occupants in a frontal collision.

Be careful not to damage the seat

belt webbing or buckle. Do not

allow the seat belt webbing or

buckle to get caught or pinched in

the rear seat. Ensure that the seat-

back is completely locked into its

upright position by pushing on the

top of the seatback. Otherwise, in

an accident or sudden stop, the

seat could fold down and allow

cargo to enter the passenger com-

partment, which could result in

serious injury or death.

WARNING - Cargo loading

Make sure the engine is off, the

transaxle is in P and the hand brake

is applied whenever loading or

unloading cargo. Failure to take

these steps may allow the vehicle

to move if shift lever is inadvertent-

ly moved to another position.

CAUTION - Rear seat belts

When returning the rear seatbacks

to the upright position, remember

to return the rear shoulder belts to

their proper position.

3 12

Safety system of your vehicle -> Seat for Your Hyundai I30 4 Door Third Generation (2016-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals