Get What to do in an emergency -> If you have a flat tyre Guide for Hyundai I30 4 Door Third Generation (2016-2026)

What to do in an emergency

IF YOU HAVE A FLAT TYRE

F070101AUN-EA

Jacking instructions

The jack is provided for emergency

tyre changing only.

To prevent the jack from “rattling”

while the vehicle is in motion, store it

properly.

Follow jacking instructions to reduce

the possibility of personal injury.

WARNING - Changing

tyres

• Never attempt vehicle repairs

in the traffic lanes of a public

road or highway.

• Always move the vehicle com-

pletely off the road and onto

the shoulder before trying to

change a tyre.The jack should

be used on level firm ground.

If you cannot find a firm, level

place off the road, call a tow-

ing service company for

assistance.

OFD067004

F070100AFD-EA

Jack and tools

The spare tyre, jack, jack handle, the

wheel brace are stored in the lug-

gage compartment. Remove the lug-

gage under tray out of the way to

reach this equipment.

(1) Towing hook

(2) Jack handle

(3) Screwdriver

(4) Jack

• Be sure to use the correct

front and rear jacking posi-

tions on the vehicle; never

use the bumpers or any other

part of the vehicle for jack

support.

(Continued)

(5) Wheel brace

6 7

What to do in an emergency

(Continued)

• The vehicle can easily roll off

the jack causing serious

injury or death. No person

should place any portion of

their body under a vehicle that

is supported only by a jack;

use vehicle support stands.

• Do not start or run the engine

while the vehicle is on the

jack.

OFD067005

OED066033M

• Do not allow anyone to remain

in the vehicle while it is on the

jack.

• Make sure any children pres-

ent are in a secure place away

from the road and from the

vehicle to be raised with the

jack.

F070200AFD-EA

F070300AFD-EA

Removing and storing the spare

tyre

Turn the tyre hold-down wing bolt

counterclockwise.

Store the tyre in the reverse order of

removal.

To prevent the spare tyre and tools

Changing tyres

1. Park on a level surface and apply

the hand brake firmly.

2. Shift the shift lever into

(Reverse) with manual transaxle

or (Park) with automatic

transaxle.

R

P

from “rattling” while the vehicle is in 3. Activate the hazard warning flash-

motion, store them properly.

er.

6 8

What to do in an emergency

WARNING - Changing a tyre

• To prevent vehicle movement

while changing a tyre, always

set the hand brake fully, and

always block the wheel diago-

nally opposite the wheel

being changed.

• We recommend that the

wheels of the vehicle be

chocked, and that no person

remain in a vehicle that is

being jacked.

OFD067015

OFD067006

4. Remove the wheel brace, jack,

jack handle, and spare tyre from

the vehicle.

5. Block both the front and rear of the

wheel that is diagonally opposite

the jack position.

6. Loosen the wheel nuts counter-

clockwise one turn each, but do

not remove any nut until the tyre

has been raised off the ground.

6 9

What to do in an emergency

9. Loosen the wheel nuts and

remove them with your fingers.

Slide the wheel off the studs and

lay it flat so it cannot roll away. To

put the wheel on the hub, pick up

the spare tyre, line up the holes

with the studs and slide the wheel

onto them. If this is difficult, tip the

wheel slightly and get the top hole

in the wheel lined up with the top

stud. Then jiggle the wheel back

and forth until the wheel can slide

over the other studs.

OFD067009

OUN046018

7. Place the jack at the front or rear 8. Insert the jack handle into the jack

jacking position closest to the tyre

you are changing. Place the jack

at the designated locations under

the frame. The jacking positions

are plates welded to the frame

with two tabs and a raised dot to

index with the jack.

and turn it clockwise, raising the

vehicle until the tyre just clears the

ground. This measurement is

approximately 30 mm (1.2 in).

Before removing the wheel nuts,

make sure the vehicle is stable

and that there is no chance for

movement or slippage.

WARNING - Jack location

To reduce the possibility of

injury, be sure to use only the

jack provided with the vehicle

and in the correct jack position;

never use any other part of the

vehicle for jack support.

6 10

What to do in an emergency

10. To reinstall the wheel, hold it on

the studs, put the wheel nuts on

the studs and tighten them finger

tight.The nuts should be installed

with their tapered small diameter

ends directed inward. Jiggle the

tyre to be sure it is completely

seated, then tighten the nuts as

much as possible with your fin-

gers again.

WARNING

Wheels and wheel covers may

have sharp edges. Handle them

carefully to avoid possible

severe injury. Before putting the

wheel into place, be sure that

there is nothing on the hub or

wheel (such as mud, tar, gravel,

etc.) that prevents the wheel

from fitting solidly against the

hub.

If there is, remove it. If there is

not good contact on the mount-

ing surface between the wheel

and hub, the wheel nuts could

come loose and cause the loss

of a wheel. Loss of a wheel may

result in loss of control of the

vehicle. This may cause serious

injury or death.

11. Lower the car to the ground by

turning the wheel brace counter-

clockwise.

OUN046019

Then position the wheel brace as

shown in the drawing and tighten the

wheel nuts. Be sure the socket is

seated completely over the nut. Do

not stand on the wheel brace handle

or use an extension pipe over the

wheel brace handle.

Go around the wheel tightening

every other nut until they are all tight.

Then double-check each nut for

tightness. After changing wheels,

have an authorised HYUNDAI dealer

tighten the wheel nuts to their proper

torque as soon as possible.

Wheel nut tightening torque:

Steel wheel & aluminium alloy wheel:

9~11 kg.m (65~79 lb.ft)

6 11

What to do in an emergency

If you have a tyre gauge, remove the

valve cap and check the air pressure.

If the pressure is lower than recom-

mended, drive slowly to the nearest

service station and inflate to the cor-

rect pressure. If it is too high, adjust

it until it is correct. Always reinstall

the valve cap after checking or

adjusting tyre pressure. If the cap is

not replaced, air may leak from the

tyre. If you lose a valve cap, buy

another and install it as soon as pos-

sible.

CAUTION

WARNING - Wheel studs

If the studs are damaged, they

may lose their ability to retain

the wheel.This could lead to the

loss of the wheel and a collision

resulting in serious injuries.

Your vehicle has metric threads

on the wheel studs and nuts.

Make certain during wheel

removal that the same nuts that

were removed are reinstalled -

or, if replaced, that nuts with

metric threads and the same

chamfer configuration are used.

Installation of a non-metric

thread nut on a metric stud or

vice-versa will not secure the

wheel to the hub properly and

will damage the stud so that it

must be replaced.

Note that most wheel nuts do

not have metric threads. Be sure

to use extreme care in checking

for thread style before installing

aftermarket wheel nuts or

wheels. If in doubt, consult an

authorised HYUNDAI dealer.

To prevent the jack, jack handle,

wheel brace and spare tyre from rat-

tling while the vehicle is in motion,

store them properly.

After you have changed wheels,

always secure the flat tyre in its place

and return the jack and tools to their

proper storage locations.

WARNING - Inadequate

spare tyre pressure

Check the inflation pressures as

soon as possible after installing

the spare tyre. Adjust it to the

specified pressure, if necessary.

Refer to “Tyres and wheels” in

section 9.

6 12

What to do in an emergency

F070301AUN-EA

When using a compact spare tyre,

observe the following precautions:

• Under no circumstances should

you exceed 80 km/h (50 mph); a

higher speed could damage the

tyre.

• Ensure that you drive slowly

enough for the road conditions to

avoid all hazards. Any road hazard,

such as a pothole or debris, could

seriously damage the compact

spare.

• Any continuous road use of this

tyre could result in tyre failure, loss

of vehicle control, and possible

personal injury.

• Do not exceed the vehicle’s maxi-

mum load rating or the load-carry-

ing capacity shown on the sidewall

of the compact spare tyre.

• Avoid driving over obstacles. The

compact spare tyre diameter is

smaller than the diameter of a con-

ventional tyre and reduces the

ground clearance approximately

25 mm (1 inch), which could result

in damage to the vehicle.

Important - use of compact spare

tyre (if equipped)

WARNING

The compact spare tyre is for

emergency use only. Do not

operate your vehicle on this

compact spare at speeds over

80 km/h (50 mph). The original

tyre should be repaired or

replaced as soon as is possible

to avoid failure of the spare

possibly leading to personal

injury or death.

Your vehicle is equipped with a com-

pact spare tyre. This compact spare

tyre takes up less space than a reg-

ular-size tyre. This tyre is smaller

than a conventional tyre and is

designed for temporary use only.

CAUTION

• You should drive carefully

when the compact spare is in

use. The compact spare

should be replaced by the

proper conventional tyre and

rim at the first opportunity.

• The operation of this vehicle

is not recommended with

more than one compact spare

tyre in use at the same time.

The compact spare should be inflat-

ed to 420 kPa (60 psi).

✽

NOTICE

Check the inflation pressure after

installing the spare tyre. Adjust it to

the specified pressure, as necessary.

6 13

What to do in an emergency

• Do not take this vehicle through an • The compact spare tyre should not

automatic car wash while the com-

pact spare tyre is installed.

be used on any other wheels, nor

should standard tyres, snow tyres,

wheel covers or trim rings be used

with the compact spare wheel. If

such use is attempted, damage to

these items or other car compo-

nents may occur.

• Do not use tyre chains on the com-

pact spare tyre. Because of the

smaller size, a tyre chain will not fit

properly. This could damage the

vehicle and result in loss of the

chain.

• The compact spare tyre should not

be installed on the front axle if the • Do not tow a trailer while the tem-

vehicle must be driven in snow or

on ice.

• Do not use more than one tempo-

rary spare tyre at a time.

porary spare tyre is installed.

• Do not use the compact spare tyre

on any other vehicle because this

tyre has been designed especially

for your vehicle.

• The compact spare tyre’s tread life

is shorter than a regular tyre.

Inspect your compact spare tyre

regularly and replace worn com-

pact spare tyres with the same size

and design, mounted on the same

wheel.

6 14

What to do in an emergency -> If you have a flat tyre for Your Hyundai I30 4 Door Third Generation (2016-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals