Get Instrument cluster -> Instrument cluster Guide for Hyundai Ioniq SUV First Generation (2021-2026)

Instrument cluster

INSTRUMENT CLUSTER

The actual cluster in the vehicle may differ from the illustration.

For more information, refer to “Gauges and metres” section in this chapter.

ONE1041021

1. Speedometer

2. Power/Charge gauge

3. Distance to empty

4. Warning indicator light

5. LCD display

6. Battery SOC (State of Charge) gauge

Information

śꢀ SNOW/NORMAL/ECO/SPORT mode by pressing the drive mode button will change

the main theme of the cluster

4-4

04

Instrument cluster control

Instrument panel illumination

Gauges and metres

Speedometer

ONE1041013

ONE1041044L

The speedometer indicates the speed of

the vehicle and is calibrated in kilometres

per hour (km/h).

The brightness of the instrument

panel can also be adjusted from the

infotainment system screen. When Start/

Stop button is in the ON position, select

œ6HWWLQJVꢀƟꢀ'LVSOD\ꢀƟꢀ,OOXPLQDWLRQŔꢁꢀ

śꢀ :KHQꢀœ$XWRꢂDGMXVWꢀ%ULJKWQHVVŔꢀLVꢀ

selected from the Settings menu, the

brightness is automatically adjusted.

śꢀ When the brightness of the instrument

panel illumination is adjusted, the

interior switch illumination intensity is

also adjusted.

WARNING

Never adjust the instrument cluster

whilst driving. This could result in loss

of control and lead to an accident that

may cause death, serious injury, or

vehicle damage.

4-5

Instrument cluster

Power/charge gauge

State of charge (SOC) gauge for

high voltage battery

ONE1Q011050

ONE1Q011003

The Power/Charge Gauge shows the

energy consumption rate of the vehicle

and the charge/discharge status of the

regenerative brakes.

śꢀ The SOC gauge shows the charging

status of the high voltage battery.

śꢀ The low percentage number on the

indicator indicates that there is not

enough energy in the high voltage

battery. 100% indicates that the

driving battery is fully charged.

śꢀ When driving on highways or

motorways, make sure to check

in advance if the driving battery is

charged enough.

śꢀ POWER :

It shows the energy consumption rate

of the vehicle when driving uphill or

accelerating. The more electric energy

is used, the higher the gauge level.

śꢀ CHARGE :

It shows the charging status of the

battery when it is being charged by

the regenerative brakes (decelerating

or driving on a downhill road). The

more electric energy is charged, the

lower the gauge level.

4-6

04

Outside temperature gauge

ONE1Q011011

When the remaining battery is lower than

10 % on the SOC gauge, the warning light

ONE1041014

This gauge indicates the current outside

air temperatures by 1°C (1°F).

Note that the temperature indicated

on the LCD display may not change

as quickly as the outside temperature

(there may be a slight delay before the

temperature changes.)

You can change the temperature

unit from the Settings menu in the

infotainment system screen. Select:

(

) turns ON to alert you of the battery

level.

When the warning light ( ) turns ON,

the vehicle can drive an additional 30 ~

40 km depending on the driving speed,

heater/air conditioner, weather, driving

style, and other factors. Charging is

required.

NOTICE

-

*HQHUDOꢀ6HWWLQJVꢀƟꢀ8QLWꢀƟꢀ7HPSHUDWXUHꢀ

8QLWꢀƟꢀr&ꢃr)

When the remaining battery is lower

than 10 % for the high voltage battery,

the vehicle speed is limited and then

eventually the vehicle will turn OFF.

Charge the vehicle immediately.

For detailed information, refer to the

separately supplied infotainment

system manual.

Both the temperature unit on the cluster

LCD display and climate control screen

will change.

4-7

Instrument cluster

Odometer

Information

śꢀ If the vehicle is not on level ground or

the battery power has been interrupted,

the distance to empty function may not

operate correctly.

śꢀ The distance to empty may differ

from the actual driving distance as it

is an estimate of the available driving

distance.

śꢀ The distance to empty may vary

significantly based on driving

conditions, driving habits, and

condition of the vehicle.

ONE1041016

The odometer indicates the total

distance that the vehicle has been

driven and should be used to determine

when periodic maintenance should be

performed.

Distance to empty

ONE1Q011049

śꢀ The distance to empty is the

estimated distance the vehicle can

be driven with the remaining electric

energy.

śꢀ The distance to empty varies depend

on which drive mode is selected

among ECO/NORMAL/SPORT mode.

For more detail information, refer to

‘Distance to empty’ in chapter 1.

4-8

04

Reduction gear shift indicator

Warning and indicator lights

Information

Make sure that all warning lights are OFF

after starting the vehicle. If any light is

still ON, this indicates a situation that

needs attention.

Ready indicator

ONE1041015

This indicator illuminates:

The indicator displays which gear is

selected.

When the vehicle is ready to be driven.

-

ON : Normal driving is possible.

OFF : Normal driving is not possible,

or a problem has occurred.

Regenerative braking level indicator

-

Blinking : Emergency driving.

When the ready indicator goes OFF

or blinks, there is a problem with the

system. In this case, we recommend that

you have your vehicle inspected by an

authorised HYUNDAI dealer.

Service warning light

ONE1061036

The regenerative brake indicates the

level of the regenerative braking that

you set. And it also indicates Smart

UHJHQHUDWLYHꢀV\VWHPŔVꢀRSHUDWLRQꢀVWDWXVꢁ

This warning light illuminates:

śꢀ When the START/STOP button is in the

ON position.

- It illuminates for approximately 3

seconds and then goes off.

For more details, refer to "Regenerative

Braking System" in chapter 6.

śꢀ When there is a problem with related

parts of the electric vehicle control

system, such as sensors, etc.

When the warning light illuminates

whilst driving, or does not go OFF after

starting the vehicle, we recommend that

you have your vehicle inspected by an

authorised HYUNDAI dealer.

4-9

Instrument cluster

Power down indicator light

Charging connector

indicator light

This indicator light illuminates:

This warning light indicates the

connection status of the charging

connector. When the charging connector

is connected to the vehicle, the green

light illuminates for approximately 1

minute.

śꢀ When the START/STOP button is in the

ON position.

- It illuminates for approximately 3

seconds and then goes off.

śꢀ When the power is limited for the

safety of the high-powered parts of an

electric vehicle. The power is limited

for the following reasons.(Unless both

Service Warning Light and Power

Down Indicator Light illuminate at the

same time, it is not a failure.)

High voltage battery level

warning light

This warning light illuminates:

śꢀ When the high voltage battery level

- The high voltage battery level is too

low or voltage is decreasing

- The temperature of the high voltage

battery is too high or too low

is low.

śꢀ When the warning light turns ON,

charge the battery immediately.

- The temperature of the motor is

high

Seat belt warning light

NOTICE

This warning light informs the driver that

the seat belt is not fastened.

For more details, refer to “Seat Belts”

section in chapter 3.

śꢀ Do not accelerate or start the vehicle

suddenly when the power down

indicator light is ON.

śꢀ When the power is limited for the

safety of the high-powered parts of

an electric vehicle, the power down

indicator light illuminates. Your

vehicle may not be driven, or may roll

back on a slope with the indicator

light ON due to the limitation of

vehicle power.

4-10

04

Air bag warning light

Parking brake & brake fluid

warning light

(red)

This warning light illuminates:

śꢀ When you set the Start/Stop button to

śꢀ When you set the START/STOP button

the ON position.

in the ON position.

- The air bag warning light illuminates

for about 6 seconds and then turns

off when all checks have been

performed.

- It illuminates for approximately 3

seconds.

- It remains on if the parking brake is

applied.

śꢀ The air bag warning light will remain

illuminated if there is a malfunction

with the Safety Restraint System (SRS)

air bag operation.

śꢀ When the parking brake is applied.

śꢀ When the brake fluid level in the

reservoir is low.

- If the warning light illuminates

with the parking brake released, it

indicates the brake fluid level in the

reservoir is low.

If this occurs, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

śꢀ When the regenerative brake does not

Regenerative brake warning

operate.

light

(yellow)

If the brake fluid level in the reservoir is

low:

This warning light illuminates:

When the regenerative brake does not

operate and the brake does not perform

well. This causes the Brake Warning

light (red) and Regenerative Brake

Warning Light (yellow) to illuminate

simultaneously.

1. Drive carefully to the nearest safe

location and stop your vehicle.

2. With the motor stopped, check the

brake fluid level immediately and add

fluid as required (For more details,

refer to “Brake Fluid” section in

In this case, drive safely and we

recommend that you have your vehicle

inspected by an authorised HYUNDAI

dealer.

The operation of the brake pedal may

be more difficult than normal and the

braking distance can increase.

chapter 9). After adding brake fluid,

check all brake components for fluid

leaks. If a brake fluid leak is found, or

if the warning light remains on, or if

the brakes do not operate properly, do

not drive the vehicle. We recommend

that you have the vehicle inspected by

an authorised HYUNDAI dealer.

4-11

Instrument cluster

Dual-diagonal braking system

Anti-lock Brake System (ABS)

warning light

Your vehicle is equipped with dual-

diagonal braking system. This means you

still have braking on two wheels even if

one of the dual systems should fail.

With only one of the dual systems

working, more than normal pedal travel

and greater pedal pressure is required to

stop the vehicle.

Also, the vehicle will not stop in as short

a distance with only a portion of the

brake system working.

If the brakes fail whilst you are driving,

shift to a lower gear for additional vehicle

braking and stop the vehicle as soon as it

is safe to do so.

This warning light illuminates:

śꢀ When you set the Start/Stop button to

the ON position.

- The ABS warning light illuminates

for about 3 seconds and then goes

off.

śꢀ Whenever there is a malfunction with

the ABS.

Note that the hydraulic braking

system will still be operational even if

there is a malfunction with the ABS.

If this occurs, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

WARNING

Parking Brake & Brake Fluid warning

light

Electronic Brake Force

Distribution (EBD) system

warning light

Driving the vehicle with a warning light

ON is dangerous. If the Parking Brake

& Brake Fluid warning light illuminates

with the parking brake released, it

indicates that the brake fluid level is

low.

If this occurs, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

When the ABS warning and

Parking Brake warning lights are on

simultaneously, it may indicate a

problem with the Electronic Brake Force

Distribution system.

If this occurs, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

4-12

04

Electric Power Steering (EPS)

warning light

WARNING

Electronic Brake Force Distribution

(EBD) system warning light

This warning light illuminates:

When both ABS and Parking Brake &

Brake Fluid warning lights are on, the

brake system will not work normally

and you may experience an unexpected

and dangerous situation during sudden

braking.

śꢀ When you set the Start/Stop button to

the ON position.

- The electric powering steering

warning light illuminates for about 3

seconds and then goes off.

śꢀ Whenever there is a malfunction with

If this occurs, avoid high speed driving

and abrupt braking.

the electric power steering.

If this occurs, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

We recommend that you have the

vehicle inspected by an authorised

HYUNDAI dealer as soon as possible.

Master warning light

NOTICE

Electronic Brake Force Distribution

(EBD) system warning light

This warning light illuminates:

When the ABS warning light is on

or both ABS and Parking Brake &

Brake Fluid warning lights are on, the

speedometer, odometer, or tripmeter

may not work. Also, the EPS warning

light may illuminate and the steering

effort may increase or decrease.

If this occurs, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer as soon as

possible.

When there is a malfunction in operation

in any of the following systems:

-

Forward Collision-Avoidance Assist

malfunction (if equipped)

Forward Collision-Avoidance Assist

radar blocked (if equipped)

Blind-Spot Collision Warning

malfunction (if equipped)

Blind-Spot Collision Warning radar

blocked (if equipped)

LED headlamp malfunction

(if equipped)

High Beam Assist malfunction

(if equipped)

Smart Cruise Control malfunction (if

equipped)

Smart Cruise Control radar blocked (if

equipped)

Tyre Pressure Monitoring System

(TPMS) malfunction

To identify the details of the warning,

look at the LCD display.

4-13

Instrument cluster

Electronic Parking Brake

(EPB) warning light

Low tyre pressure warning

light

This warning light illuminates:

śꢀ When you set the Start/Stop button to

the ON position.

- The EPB warning light illuminates

for about 3 seconds and then goes

off.

- The low tyre pressure warning light

illuminates for approximately 3

seconds and then goes off.

śꢀ Whenever there is a malfunction with

śꢀ When one or more of your tyres are

significantly underinflated. (The

location of the underinflated tyres are

displayed on the LCD display.)

For more details, refer to “Tyre Pressure

Monitoring System (TPMS)” section in

chapter 8.

EPB.

If this occurs, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

Information

The Electronic Parking Brake (EPB)

warning light may illuminate when

the Electronic Stability Control (ESC)

indicator light comes on to indicate that

ESC is not working properly. This does

not indicate malfunction of EPB.

This warning light remains ON after

blinking for approximately 60 seconds, or

repeatedly blinks ON and OFF in 3 second

intervals:

When there is a malfunction with the

TPMS.

If this occurs, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer as soon as

possible.

For more details, refer to “Tyre Pressure

Monitoring System (TPMS)” section in

chapter 8.

4-14

04

Lane safety indicator light

(if equipped)

WARNING

Safe Stopping

śꢀ The TPMS cannot alert you to severe

and sudden tyre damage caused by

external factors.

śꢀ If you notice any vehicle instability,

immediately take your foot off the

accelerator pedal, apply the brakes

gradually with light force, and slowly

move to a safe position off the road.

This indicator light illuminates:

śꢀ [Green] When the function operating

conditions are satisfied.

śꢀ [White] When the function operating

conditions are not satisfied.

śꢀ [Yellow] Whenever there is a

malfunction with Lane Keeping Assist.

If this occurs, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

Forward safety warning light

(if equipped)

For more details, refer to “Lane Keeping

Assist (LKA)” section in chapter 7.

This warning light illuminates:

śꢀ When you set the Start/Stop button to

4 Wheel Drive (4WD) warning

light (if equipped)

the ON position.

- The Forward Safety warning light

illuminates for approximately 3

seconds and then goes off.

This warning light illuminates:

Whenever there is a malfunction with the

4WD system.

śꢀ Whenever there is a malfunction with

Forward Collision-Avoidance Assist.

If this occurs frequently, we recommend

that you have the vehicle inspected by an

authorised HYUNDAI dealer.

If this occurs, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

For more details, refer to "Four Wheel

Drive (4WD)" section in chapter 6.

For more details, refer to “Forward

Collision-Avoidance Assist (FCA)”

section in chapter 7.

4-15

Instrument cluster

LED headlight warning light

(if equipped)

Icy road warning light

(if equipped)

This warning light illuminates:

This warning light is to warn the driver

the road may be icy.

śꢀ When you set the Start/Stop button to

the ON position.

When the temperature on the outside

temperature gauge is approximately

below 4°C (40°F), the Icy Road warning

light and Outside Temperature Gauge

blinks and then illuminates. Also, the

warning chime sounds 1 time.

You can activate or deactivate Icy Road

Warning function from the Settings

menu in the infotainment system screen.

Select:

- The LED headlight warning light

illuminates for approximately 3

seconds and then goes off.

śꢀ Whenever there is a malfunction with

the LED headlight.

If this occurs, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

-

6HWXSꢀƟꢀ9HKLFOHꢀ6HWWLQJVꢀƟꢀ&OXVWHUꢀƟꢀ

&RQWHQWꢀ6HOHFWLRQꢀƟꢀ,F\ꢀ5RDGꢀ:DUQLQJ

This warning light blinks:

Whenever there is a malfunction with a

LED headlight related part.

If this occurs, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

For detailed information, refer to the

separately supplied infotainment

system manual.

Information

NOTICE

If the Icy Road warning light appears

whilst driving, you should drive more

attentively and safely refraining from

over-speeding, rapid acceleration, sudden

braking or sharp turning, etc.

Continuous driving with the LED

Headlight warning light on or blinking

can reduce LED headlight life.

4-16

04

Electronic Stability Control

(ESC) indicator light

Immobiliser indicator light

This indicator light illuminates:

This indicator light illuminates for up to

30 seconds:

śꢀ When you set the Start/Stop button to

the ON position.

When the vehicle detects the smart key

in the vehicle with the Start/Stop button

in the ACC or ON position.

- The Electronic Stability Control

indicator light illuminates for about

3 seconds and then goes off.

-

Once the smart key is detected, you

can start the vehicle.

śꢀ Whenever there is a malfunction with

ESC system.

-

The indicator light goes off after

starting the vehicle.

If this occurs, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

This indicator light blinks for a few

seconds:

This indicator light blinks:

When the smart key is not in the vehicle.

Whilst ESC is operating.

-

If the smart key is not detected, you

cannot start the vehicle.

For more details, refer to “Electronic

Stability Control (ESC)” section in

chapter 6.

This indicator light illuminates for 2

seconds and goes off:

If the smart key is in the vehicle and the

Start/Stop button is ON, but the vehicle

cannot detect the smart key.

Electronic Stability Control

(ESC) OFF indicator light

If this occurs, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

This indicator light illuminates:

śꢀ When you set the Start/Stop button to

the ON position.

- The ESC OFF indicator light

illuminates for approximately 3

seconds and then goes off.

This indicator light blinks:

Whenever there is a malfunction with the

immobiliser system.

If this occurs, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

śꢀ When you deactivate ESC system by

pressing the ESC OFF button.

For more details, refer to “Electronic

Stability Control (ESC)” section in

chapter 6.

4-17

Instrument cluster

Turn signal indicator light

High beam indicator light

This indicator light blinks:

This indicator light illuminates:

When you operate the turn signal

indicator stalk.

śꢀ When the headlamps are on and in

the high beam position

śꢀ When the turn signal lever is pulled

If any of the following occur, there may

be a malfunction with the turn signal

system.

into the Flash-to-Pass position.

Low beam indicator light

-

The turn signal indicator light

illuminates but does not blink

The turn signal indicator light blinks

rapidly

The turn signal indicator light does not

illuminate at all

This indicator light illuminates:

When the headlamps are on.

Light ON indicator light

If any of these conditions occur, we

recommend that you have the vehicle

inspected by an authorised HYUNDAI

dealer.

This indicator light illuminates:

When the parking lamps or headlamps

are on.

Rear fog indicator light

(if equipped)

This indicator light illuminates:

When the rear fog lamps are on.

4-18

04

High Beam Assist indicator

light (if equipped)

LCD display messages

Shift to P

This message is displayed if you try to

turn off the vehicle without the gear in

the P (Park) position.

If this occurs, the Start/Stop button turns

to the ACC position.

This indicator light illuminates:

When the high-beam is on with the light

switch in the AUTO position.

śꢀ White : When High Beam Assist is

ready to operate.

Low key battery

śꢀ Green : When High Beam Assist is

operating.

This message is displayed if the battery

of the smart key is discharged whilst

changing the Start/Stop button to the

OFF position.

If your vehicle detects oncoming or

preceding vehicles, High Beam Assist

will switch the high beam to low beam

automatically.

For more details, refer to “High Beam

Assist (HBA)” section in chapter 5.

Press START button whilst turning

wheel (if equipped)

This message is displayed if the steering

wheel does not unlock normally when

the Start/Stop button is pressed.

AUTO HOLD indicator light

You should press the Start/Stop button

whilst turning the steering wheel right

and left.

This indicator light illuminates:

śꢀ [White] When you activate Auto Hold

by pressing the AUTO HOLD switch.

Press brake pedal to start vehicle

śꢀ [Green] When you stop the vehicle

completely by depressing the brake

pedal with Auto Hold activated.

śꢀ [Yellow] Whenever there is a

malfunction with the Auto Hold

function.

This message is displayed if the Start/

Stop button changes to the ACC position

twice by pressing the button repeatedly

without depressing the brake pedal.

You can start the vehicle by depressing

the brake pedal and then pressing the

Start/Stop button.

If this occurs, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

For more details, refer to “Electronic

Parking Brake (EPB)” section in chapter

6.

4-19

Instrument cluster

Key not in vehicle

Check BRAKE SWITCH fuse

This message is displayed if the smart

key is not in the vehicle when you leave

the vehicle with the Start/Stop button in

the ON or Start position.

Always turn off the vehicle before leaving

your vehicle.

This message is displayed if the brake

switch fuse is disconnected.

You need to replace the fuse with a new

one before starting the vehicle.

If that is not possible, you can start the

vehicle by pressing the Start/Stop button

for 10 seconds in the ACC position.

Key not detected

Shift to P to start vehicle

This message is displayed if you try to

start the vehicle in any other position

except P (Park) or N (Neutral).

This message is displayed if the smart

key is not detected when you press the

Start/Stop button.

Press START button again

Check smart key system

This message is displayed if you were

unable to start the vehicle when the

Start/Stop button was pressed.

If this occurs, attempt to start the vehicle

by pressing the Start/ Stop button again.

If the warning message appears each

time you press the Start/Stop button, we

recommend that you have the vehicle

inspected by an authorised HYUNDAI

dealer.

This message is displayed when there is

a problem with the smart key system. We

recommend that you have the vehicle

inspected by an authorised HYUNDAI

dealer.

Press START button with key

This message is displayed if you press

the Start/Stop button whilst the warning

message “Key not detected” is displayed.

At this time, the immobiliser indicator

light blinks.

4-20

04

Door, Bonnet, Tailgate open

indicator

Lights

ꢀType A

ꢀType B

ONE1041032L

ONE1041033L

ONE1041012

This indicator displays which exterior

light is selected using the lighting

control.

You can activate or deactivate Wiper/

Lights display function from the Settings

menu in the infotainment system screen.

Select:

This warning is displayed if any door

or bonnet or tailgate is left open. The

warning will indicate which door is open

in the display.

CAUTION

-

6HWXSꢀƟꢀ9HKLFOHꢀ6HWWLQJVꢀƟꢀ&OXVWHUꢀ

Ɵꢀ&RQWHQWꢀ6HOHFWLRQꢀƟꢀ:LSHUꢃ/LJKWVꢀ

Display

Before driving the vehicle, you should

confirm that the door/bonnet/tailgate

are fully closed.

For detailed information, refer to the

separately supplied infotainment

system manual.

Low tyre pressure

ONE1081021L

This warning message is displayed if the

tyre pressure is low. The corresponding

tyre on the vehicle will be illuminated.

For more details, refer to “Tyre Pressure

Monitoring System (TPMS)” section in

chapter 8.

4-21

Instrument cluster

Wiper

Low washer fluid (if equipped)

This message is displayed if the washer

fluid level in the reservoir is nearly empty.

ꢀType A

ꢀType B

Have the washer fluid reservoir refilled.

Check haptic steering wheel system

This message is displayed if there is a

problem with the haptic steering wheel

system. We recommend that you have

the vehicle inspected by an authorised

HYUNDAI dealer.

ONE1041004L

ONE1041034L

Check headlight (if equipped)

This message is displayed if the

headlights are not operating properly. A

lamp may need to be replaced.

Make sure to replace the burned out

bulb with a new one of the same wattage

rating.

This indicator displays which wiper speed

is selected using the wiper control.

You can activate or deactivate Wiper/

Lights display function from the Settings

menu in the infotainment system screen.

Select:

-

6HWXSꢀƟꢀ9HKLFOHꢀ6HWWLQJVꢀƟꢀ&OXVWHUꢀ

Ɵꢀ&RQWHQWꢀ6HOHFWLRQꢀƟꢀ:LSHUꢃ/LJKWVꢀ

Display

Check turn signal (if equipped)

This message is displayed if the turn

signal lamps are not operating properly.

A lamp may need to be replaced.

Make sure to replace the burned out

bulb with a new one of the same wattage

rating.

For detailed information, refer to the

separately supplied infotainment

system manual.

Check headlamp LED (if equipped)

This message is displayed if there is a

problem with the LED headlamp. We

recommend that you have the vehicle

inspected by an authorised HYUNDAI

dealer.

4-22

04

Shift to P to charge/Shift to P to

start charging

Unplug vehicle to start

OOSEV040498L

OOSEV040497L

This message is displayed when you

start the vehicle without unplugging the

charging cable. Unplug the charging

cable, and then turn on the vehicle.

This message is displayed if you connect

the charging cable without the gear in

the P (Park) position.

Shift to P (Park) before connecting the

charging cable.

Charging door open

Remaining time

ꢀAC charge

ꢀDC charge

OOSEV040499L

This message is displayed when the

vehicle is driven with the charging door

opened. Close the charging door and

then start driving.

ONE1Q011058E

ONE1Q011059E

This message is displayed to notify the

remaining time to charge the battery to

the selected target battery charge level.

4-23

Instrument cluster

Charging stopped. Check the AC/DC

charger

Charging stopped. Check the cable

connection

ꢀAC charge

ꢀDC charge

OOSEV040500L

OOSEV040501L

OOSEV040502L

śꢀ This warning message is displayed

when charging is stopped for the

reasons below:

This warning message is displayed

when charging is stopped because the

charging connector is not correctly

connected to the charging inlet

In this case, separate the charging

connector and re-connect it and check

whether there is any problem (external

damage, foreign substances, etc.) with

the charging connector and charging

inlet.

If the same problem occurs when

charging the vehicle with a replaced

charging cable or genuine HYUNDAI

portable charger, we recommend that

you have your vehicle inspected by an

authorised HYUNDAI dealer.

- There is a problem with the external

AC charger or DC charger charger

- The external AC charger stopped

charging

- The charging cable is damaged

In this case, check whether there is any

problem with the external AC or DC

charger and charging cable.

If the same problem occurs when

charging the vehicle with a normally

operating AC charger or genuine

HYUNDAI portable charger, we

recommend that you have your vehicle

inspected by an authorised HYUNDAI

dealer.

4-24

04

Check regenerative brakes

Charge immediately. Power limited

OOSEV040503E

OOSEV040506L

These warning messages are displayed

when the regenerative brake system

does not work properly.

When the high voltage battery level

reaches below approximately 0 %, this

warning message is displayed.

In this case, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

The warning light on the instrument

cluster ( ) will turn on simultaneously.

7KHꢀYHKLFOHŔVꢀSRZHUꢀZLOOꢀEHꢀUHGXFHGꢀWRꢀ

minimise the energy consumption of the

high voltage battery. Charge the battery

immediately.

Low EV battery

OOSEV040505L

When the high voltage battery level

reaches below approximately 10 %, this

warning message is displayed.

The warning light on the instrument

cluster ( ) will turn ON simultaneously.

Charge the high voltage battery

immediately.

4-25

Instrument cluster

12V battery discharging due to

additional electrical devices

Power limited due to low EV battery

temperature. Charge battery

ONE1041054L

OOSEV040507L

This warning message is displayed when

a battery discharge due to excessive

current is detected by mounting an

unauthorised electrical device such as a

black box.

Be careful as it may cause battery

discharge problems.

Both warning messages are displayed

to protect electric vehicle system when

outside temperature is low. If the high

voltage battery charging level is low

and parked outside in low temperature

for a long time, vehicle power could be

limited.

Charging the battery before driving helps

increase power.

If the warning message is not

disappeared after the external electrical

device is removed, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

NOTICE

If these warning messages are still

displayed even after the ambient

temperature has increased, we

recommend that you have the vehicle

inspected by an authorised HYUNDAI

dealer.

4-26

04

EV battery overheated! Stop vehicle

Power limited

OOSEV040509L

ONE1Q011008L

This warning message is displayed to

protect battery and electric vehicle

system when the high voltage battery

temperature is too high.

Turn off the START/STOP button and

stop the vehicle so that the battery

temperature decreases.

This warning message is displayed:

śꢀ When the START/STOP button is in

the ON position.

- It illuminates for approximately 3

seconds and then goes off.

śꢀ When the power is limited for the

safety of the high-powered parts of an

electric vehicle. The power is limited

for the following reasons. (Unless

both Service Warning Light and Power

Down Indicator Light illuminate at the

same time, it is not a failure.)

- The high voltage battery level is too

low or voltage is decreasing

- The temperature of the high voltage

battery is too high or too low

- The temperature of the motor is

high

NOTICE

śꢀ When this warning message is

displayed, do not accelerate or start

the vehicle suddenly.

śꢀ When the power is limited for the

safety of the high-powered parts

of an electric vehicle, the warning

message is displayed. Your vehicle

may not be driven, or may roll back

on a slope with the warning message

displayed due to the limitation of

vehicle power.

4-27

Instrument cluster

Stop vehicle and check power

supply

Check virtual engine sound system

OOSEV040512L

OOSEV040511L

This message is displayed when there is

a problem with the Virtual Engine Sound

System (VESS).

In this case, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

This warning message is displayed when

a failure occurs in the power supply

system.

In this case, park the vehicle in a safe

location and we recommend that

you tow your vehicle to the nearest

authorised HYUNDAI dealer and have the

vehicle inspected.

Check electric vehicle system

Check active air flap system

OOSEV040513L

This warning message is displayed when

there is a problem with the electric

vehicle control system.

Refrain from driving when the warning

message is displayed.

In this case, we recommend that

you have the vehicle inspected by an

authorised HYUNDAI dealer.

OOSEV040510L

This warning message is displayed in the

following situations:

-

There is a malfunction with the

actuator flap

There is a malfunction with the

actuator air flap controller

The air flap does not open

When all of the above conditions are

fixed, the warning will disappear.

4-28

Instrument cluster -> Instrument cluster for Your Hyundai Ioniq SUV First Generation (2021-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals