Get Safety features of your vehicle -> CHILD RESTRAINT SYSTEM Guide for Hyundai Ix35 SUV First Generation (2009-2015)

Safety features of your vehicle

CHILD RESTRAINT SYSTEM

Children riding in the car should sit in the

rear seat and must always be properly

restrained to minimize the risk of injury in

an accident, sudden stop or sudden

maneuver. According to accident statis-

tics, children are safer when properly

restrained in the rear seats than in the

front seat. Larger children not in a child

restraint should use one of the seat belts

provided.

(Continued)

WARNING

• When the child restraint system

is not in use, store it in the lug-

gage area or fasten it with a seat

belt so that it will not be thrown

forward in the case of a sudden

stop or an accident.

• A child restraint system must be

placed in the rear seat. Never

install a child or infant seat on the

front passenger's seat. Should an

accident occur and cause the

passenger-side air bag to deploy,

it could severely injure or kill an

infant or child seated in an infant

or child seat. Thus only use a

child restraint in the rear seat of

your vehicle.

• Children may be seriously injured

or killed by an inflating air bag.

All children, even those too large

for child restraints, must ride in

the rear seat.

You should be aware of the specific

requirements in your state. Child and/or

infant safety seats must be properly

placed and installed in the rear seat. You

must use a commercially available child

restraint system that meets the require-

ments of the Federal Motor Vehicle Safety

Standards (FMVSS).

• A seat belt or child restraint sys-

tem can become very hot if it is

left in a closed vehicle on a sunny

day, even if the outside tempera-

ture does not feel hot. Be sure to

check the seat cover and buckles

before placing a child there.

Child restraint systems are designed to be

secured in vehicle seats by lap belts or the

lap belt portion of a lap/shoulder belt, or

by a LATCH system.

(Continued)

Children could be injured or killed in a

crash if their restraints are not properly

secured. For small children and babies, a

child seat or infant seat must be used.

Before buying a particular child restraint

system, make sure it fits your car seat

and seat belts, and fits your child. Follow

all the instructions provided by the man-

ufacturer when installing the child

restraint system.

3 30

Safety features of your vehicle

(Continued)

WARNING

To reduce the chance of serious or

fatal injuries:

• Never leave children unattended

in a vehicle – not even for a short

time. The car can heat up very

quickly, resulting in serious

injuries to children inside. Even

very young children may inadver-

tently cause the vehicle to move,

entangle themselves in the win-

dows, or lock themselves or oth-

ers inside the vehicle.

• Never use an infant carrier or a

child safety seat that "hooks"

over a seatback, it may not pro-

vide adequate security in an acci-

dent.

• Children of all ages are safer

when restrained in the rear seat.

A child riding in the front passen-

ger seat can be forcefully struck

by an inflating air bag resulting in

serious or fatal injuries.

• Seat belts can become very hot,

especially when the car is parked

in direct sunlight. Always check

seat belt buckles before fasten-

ing them over a child.

• Always follow the child restraint

system manufacturer’s instruc-

tions for installation and use of

the child restraint.

• Never allow two children, or any

two persons, to use the same

seat belt.

• Always make sure the child seat

is secured properly in the car and

your child is securely restrained

in the child seat.

• Children often squirm and repo-

sition themselves improperly.

Never let a child ride with the

shoulder belt under their arm or

behind their back. Always proper-

ly position and secure children in

the rear seat.

• Never hold a child in your arms or

lap when riding in a vehicle. The

violent forces created during a

crash will tear the child from your

arms and throw the child against

the car’s interior.

• Never allow a child to stand-up or

kneel on the seat or floor of a

moving vehicle. During a colli-

sion or sudden stop, the child

can be violently thrown against

the vehicle’s interior, resulting in

serious injury.

• Never put a seat belt over your-

self and a child. During a crash,

the belt could press deep into the

child causing serious internal

injuries.

(Continued)

3 31

Safety features of your vehicle

Rearward-facing child restraint system

For safety reasons, we recommend that

the child restraint system be used in the

rear seats.

WARNING - Child seat

installation

• A child can be seriously injured

or killed in a collision if the child

restraint is not properly anchored

to the car and the child is not

properly restrained in the child

restraint. Before installing the

child restraint system, read the

instructions supplied by the child

restraint system manufacturer.

WARNING

Never place a rear-facing child

restraint in the front passenger

seat, because of the danger an

inflating passenger-side air bag

could impact the rear-facing child

restraint and kill the child.

CRS09

Forward-facing child restraint system

• If the seat belt does not operate

as described in this section, have

the system checked immediately

by your authorized HYUNDAI

dealer.

Since all passenger seat belts move

freely under normal conditions and only

lock under extreme or emergency condi-

tions (emergency locking mode), you

must manually change these seat belts

to the automatic locking mode to secure

a child restraint.

• Failure to observe this manual's

instructions regarding child

restraint systems and the

instructions provided with the

child restraint system could

increase the chance and/or

severity of injury in an accident.

OUN026150

Using a child restraint system

For small children and babies, the use of

a child seat or infant seat is required.This

child seat or infant seat should be of

appropriate size for the child and should

be installed in accordance with the man-

ufacturer's instructions.

3 32

Safety features of your vehicle

E2MS103005

OEN036101

OEN036102

Placing a passenger seat belt into

the automatic locking mode

To install a child restraint system on the

outboard or center rear seats, do the fol-

lowing:

3. Pull the shoulder portion of the seat

belt all the way out. When the shoulder

portion of the seat belt is fully extend-

ed, it will shift the retractor to the

“Automatic Locking” (child restraint)

mode.

The use of the automatic locking mode

will ensure that the normal movement of

the child in the vehicle does not cause

the seat belt to be pulled out and loosen

the firmness of its hold on the child

restraint system. To secure a child

restraint system, use the following proce-

dure.

1. Place the child restraint system on the

seat and route the lap/shoulder belt

around or through the restraint, follow-

ing the restraint manufacturer’s

instructions. Be sure the seat belt web-

bing is not twisted.

2. Fasten the lap/shoulder belt latch into

the buckle. Listen for the distinct “click”

sound.

Position the release button so that it is

easy to access in case of an emergency.

3 33

Safety features of your vehicle

WARNING - Auto lock

mode

The lap/shoulder belt automatically

returns to the “emergency lock

mode” whenever the belt is allowed

to retract fully. Therefore, the pre-

ceding seven steps must be fol-

lowed each time a child restraint is

installed.

If the retractor is not in the

Automatic Locking mode, the child

restraint can move when your vehi-

cle turns or stops suddenly. A child

can be seriously injured or killed if

the child restraint is not properly

anchored to the car, including set-

ting the retractor to the Automatic

Locking mode.

OEN036103

OEN036104

4. Slowly allow the shoulder portion of

the seat belt to retract and listen for an

audible “clicking” or “ratcheting” sound.

This indicates that the retractor is in

the “Automatic Locking” mode. If no

distinct sound is heard, repeat steps 3

and 4.

5. Remove as much slack from the belt

as possible by pushing down on the

child restraint system while feeding the

shoulder belt back into the retractor.

6. Push and pull on the child restraint

system to confirm that the seat belt is

holding it firmly in place. If it is not,

release the seat belt and repeat steps

2 through 6.

When the seat belt is allowed to

retract to its fully stowed position, the

retractor will automatically switch

from the “Automatic Locking” mode to

the emergency lock mode for normal

adult usage.

7. Double check that the retractor is in the

“Automatic Locking” mode by attempt-

ing to pull more of the seat belt out of

the retractor. If you cannot, the retractor

is in the “Automatic Locking” mode.

To remove the child restraint, press the

release button on the buckle and then

pull the lap/shoulder belt out of the

restraint and allow the seat belt to retract

fully.

3 34

Safety features of your vehicle

WARNING

A child can be seriously injured or

killed in a collision if the child

restraint is not properly anchored

to the car and the child is not prop-

erly restrained in the child restraint.

Always follow the child seat manu-

facturer’s instructions for installa-

tion and use.

OLM039033N

OLM039034

WARNING - Tether strap

Securing a child restraint seat with

tether anchor system

1. Route the child restraint seat tether

strap over the seatback.

Never mount more than one child

restraint to a single tether anchor

or to a single lower anchorage

point. The increased load caused

by multiple seats may cause the

tethers or lower anchorage points

to break, causing serious injury or

death.

Child restraint hook holders are located

on the back of the rear seatbacks.

For vehicles with adjustable head-

rests, route the tether strap under the

headrest and between the headrest

posts, otherwise route the tether strap

over the top of the seatback.

2. Connect the tether strap hook to the

appropriate child restraint hook holder

and tighten to secure the child restraint

seat.

3 35

Safety features of your vehicle

WARNING - Child restraint

check

Check that the child restraint sys-

tem is secure by pushing and

pulling it in different directions.

Incorrectly fitted child restraints

may swing, twist, tip or separate

causing death or serious injury.

Lower Anchor

Position Indicator

Lower Anchor

WARNING - Child restraint

anchorage

OLM039035

OLM039036N

Securing a child restraint seat with

child seat lower anchor system

Child restraint symbols are located on

the left and right rear seat backs to indi-

cate the position of the lower anchors for

child restraints.

• Child restraint anchorages are

designed to withstand only those

loads imposed by correctly fitted

child restraints. Under no circum-

stances are they to be used for

adult seat belts or harnesses or

for attaching other items or

equipment to the vehicle.

Some child seat manufacturers make

child restraint seats that are labeled as

LATCH or LATCH-compatible child

restraint seats. LATCH stands for "Lower

Anchors and Tethers for Children". These

seats include two rigid or webbing

mounted attachments that connect to

two LATCH anchors at specific seating

positions in your vehicle. This type of

child restraint seat eliminates the need to

use seat belts to attach the child seat in

the rear seats.

• The tether strap may not work

properly if attached somewhere

other than the correct tether

anchor.

3 36

Safety features of your vehicle

Also, test the child restraint seat before

you place the child in it. Tilt the seat from

side to side. Also try to tug the seat for-

ward. Check to see if the anchors hold

the seat in place.

WARNING

When using the vehicle's "LATCH"

system to install a child restraint

system in the rear seat, all unused

vehicle rear seat belt metal latch

plates or tabs must be latched

securely in their seat belt buckles

and the seat belt webbing must be

retracted behind the child restraint

to prevent the child from reaching

and taking hold of unretracted seat

belts. Unlatched metal latch plates

or tabs may allow the child to reach

the unretracted seat belts which

may result in strangulation and a

serious injury or death to the child

in the child restraint.

CAUTION

Do not allow the rear seat belt web-

bing to get scratched or pinched by

the child-seat latch and LATCH

anchor during the installation.

OLM039053N

LATCH anchors have been provided in

your vehicle. The LATCH anchors are

located in the left and right outboard rear

seating positions. Their locations are

shown in the illustration. There is no

LATCH anchor provided for the center

rear seating position.

WARNING

If the child restraint is not anchored

properly, the risk of a child being

seriously injured or killed in a colli-

sion greatly increases.

The LATCH anchors are located between

the seatback and the seat cushion of the

rear seat left and right outboard seating

positions.

WARNING

Install the child restraint seat fully

rearward against the seatback with

the seatback reclined two positions

from the most upright latched posi-

tion.

WARNING - LATCH lower

anchors

LATCH lower anchors are only to

be used with the left and right rear

outboard seating positions. Never

Follow the child seat manufacturer’s

instructions to properly install child

restraint seats with LATCH or LATCH-

compatible attachments.

attempt to attach

a

LATCH

equipped seat in the center seating

position. You may damage the

anchors or the anchors may fail

and break in a collision.

Once you have installed the LATCH child

restraint, assure that the seat is properly

attached to the LATCH and tether

anchors.

3 37

Safety features of your vehicle -> CHILD RESTRAINT SYSTEM for Your Hyundai Ix35 SUV First Generation (2009-2015)

Related Topics

Popular Owner Manuals

Latest Owner Manuals