Get Safety system of your vehicle -> Child Restraint System (CRS) Guide for Hyundai Ix35 SUV Second Generation (2016-2023)

Safety system of your vehicle

CHILD RESTRAINT SYSTEM (CRS)

Most countries have child restraint

Child Restraint System (CRS)

always in the rear

Children always in the rear

laws which require children to travel

in approved child restraint devices.

The laws governing the age or

height/weight restrictions at which

seat belts can be used instead of

child restraints differs among coun-

tries, so you should be aware of the

specific requirements in your coun-

try, and where you are travelling.

Infants and younger children must be

restrained in an appropriate rear-fac-

ing or forward-facing CRS that has

first been properly secured to the

rear seat of the vehicle. Read and

comply with the instructions for

installation and use provided by the

manufacturer of the child restraint.

WARNING

Always properly restrain chil-

dren in the rear seats of the

vehicle.

Children of all ages are safer

when restrained in the rear seat.

A child riding in the front pas-

senger seat can be forcefully

struck by an inflating air bag

resulting in SERIOUS INJURY

or DEATH.

Child restraint systems must be

properly placed and installed in the

rear seat. You must use a commer-

cially available child restraint system

that meets the requirements of the

Safety Standards of your country.

WARNING

An improperly secured child

restraint can increase the risk

of SERIOUS INJURY or DEATH

in an accident. Always take the

following precautions when

using a child restraint system:

Children under age 13 must always

ride in the rear seats and must

always be properly restrained to min-

imize the risk of injury in an accident,

sudden stop or sudden maneuver.

According to accident statistics, chil-

dren are safer when properly

restrained in the rear seats than in

the front seat. Even with air bags,

children can be seriously injured

or killed. Children too large for a

child restraint must use the seat belts

provided.

Child restraint systems are generally

designed to be secured in a vehicle

seat by lap belt or the lap belt portion

of a lap/shoulder belt, or by a top-

tether anchorage and/or ISOFIX

lower anchorage in the rear seats of

the vehicle.

• NEVER install a child or infant

restraint in the front passen-

ger’s seat.

• Always properly secure the

child restraint to a rear seat of

the vehicle.

(Continue)

2-38

Child restraint system types

Selecting a Child Restraint

System (CRS)

(Continued)

There are three main types of child

restraint systems: rear-facing seats,

forward-facing seats, and booster

seats. They are classified according

to the child’s age, height and weight.

• Always follow the child

restraint system manufactur-

er’s instructions for installa-

tion and use.

When selecting a CRS for your child,

always:

2

• Make sure the CRS has a label

certifying that it meets applicable

Safety Standards of your country.

• Always properly restrain your

child in the child restraint.

Rear-facing child restraints

• Select a child restraint based on

your child’s height and weight. The

required label or the instructions

for use typically provide this infor-

mation.

• Do not use an infant carrier or

a

child safety seat that

WARNING

“hooks” over a seatback, it

may not provide adequate

protection in an accident.

NEVER install a child or infant

restraint in the front passen-

ger’s seat.

• Select a child restraint that fits the

vehicle seating position where it

will be used.

• After an accident, we recom-

mend

a

HYUNDAI dealer

Placing

a

rear-facing child

check the child restraint sys-

tem, seat belts, ISOFIX lower

anchorages and top-tether

anchorages.

restraint in the front seat can

result in SERIOUS INJURY or

DEATH if the child restraint is

struck by an inflating air bag.

• Read and comply with the warn-

ings and instructions for installation

and use provided with the child

restraint system.

2-39

Safety system of your vehicle

Keep using restraints in the rear-fac-

ing position as long as children fit

within the height and weight limits

allowed by the child restraint’s manu-

facturer. It’s the best way to keep them

safe. Once your child has outgrown

the rear-facing child restraint, your

child is ready for a forward-facing

child restraint with a harness.

OLMB033041

OLMB033042

A rear-facing child restraint provides

restraint with the seating surface

against the back of the child. The har-

ness system holds the child in place,

and in an accident, acts to keep the

child positioned in the restraint and

reduce the stress to the fragile neck

and spinal cord.

Forward-facing child restraints

A forward-facing child restraint pro-

vides restraint for the child’s body with

a harness. Keep children in a forward-

facing child restraint with a harness

until they reach the top height or

weight limit allowed by your child

restraint’s manufacturer.

All children under age one must

always ride in a rear-facing child

restraint. There are different types of

rear-facing child restraints: infant-only

seats can only be used rear-facing.

Convertible and 3-in-1 child restraints

typically have higher height and

weight limits for the rear-facing posi-

tion, allowing you to keep your child

rear-facing for a longer period of time.

Once your child outgrows the forward-

facing child restraint, your child is

ready for a booster seat.

2-40

Booster seats

After selecting

a

proper child

Installing a Child Restraint

System (CRS)

restraint and checking that the child

restraint fits properly in the rear of

this vehicle, you are ready to install

the child restraint according to the

manufacturer’s instruction. There are

three general steps in installing the

seat properly:

A booster seat is a restraint designed

to improve the fit of the vehicle’s seat

belt system. A booster seat positions

the seat belt so that it fits properly

over the stronger parts of your child’s

body. Keep your children in booster

seats until they are big enough to fit in

a seat belt properly.

WARNING

2

Before installing your child

restraint always:

• Read and follow the instruc-

tions provided by the manu-

facturer of the child restraint.

• Properly secure the child restraint

to the vehicle. All child restraints

must be secured to the vehicle with

the lap belt or lap part of a lap/shoul-

der belt or with the ISOFIX top-teth-

er anchorage and/or ISOFIX lower

anchorage (if equipped).

For a seat belt to fit properly, the lap

belt must lie snugly across the upper

thighs, not the stomach. The shoulder

belt should lie snug across the shoul-

der and chest and not across the neck

or face. Children under age 13 must

always ride in the rear seats and must

always be properly restrained to mini-

mize the risk of injury in an accident,

sudden stop or sudden maneuver.

• Read and follow the instruc-

tions regarding child restraint

systems in this manual.

Failure to follow all warnings

and instructions could increase

the risk of the SERIOUS INJURY

or DEATH if an accident occurs.

• Make sure the child restraint is

firmly secured. After installing a

child restraint to the vehicle, push

and pull the seat forward and from

side-to-side to verify that it is

securely attached to the seat. A

child restraint secured with a seat

belt should be installed as firmly as

possible. However, some side-to-

side movement can be expected.

WARNING

If the vehicle headrest prevents

proper installation of a child

seat (as described in the child

seat system manual), the head-

rest of the respective seating

position shall be readjusted or

entirely removed.

2-41

Safety system of your vehicle

• Secure the child in the child

restraint. Make sure the child is

properly strapped in the child

restraint according to the child

restraint manufacturer’s instructions.

The child restraint manufacturer will

provide you with instructions on how

to use the child restraint with its

attachments for the ISOFIX lower

anchorages.

ISOFIX lower anchorage and

top-tether anchorage (ISOFIX

anchorages system) for children

(if equipped)

The ISOFIX system holds a child

restraint during driving and in an acci-

dent. This system is designed to

make installation of the child restraint

easier and reduce the possibility of

improperly installing your child

restraint. The ISOFIX system uses

anchors in the vehicle and attach-

ments on the child restraint. The

ISOFIX system eliminates the need

to use seat belts to secure the child

restraint to the rear seats.

WARNING

A child restraint in a closed

vehicle can become very hot.To

prevent burns, check the seat-

ing surface and buckles before

placing your child in the child

restraint.

Lower anchors are metal bars built

into the vehicle. There are two lower

anchors for each ISOFIX seating

position that will accommodate a

child restraint with lower attachments.

To use the ISOFIX system in your

vehicle, you must have a child

restraint with ISOFIX attachments.

(An ISOFIX-seat may only be installed

if it has vehicle-specific or universal

approval in accordance with the

requirements of ECE-R 44.)

2-42

WARNING

Do not attempt to install a child

restraint system using ISOFIX

lower anchorages in the rear cen-

ter seating position.There are no

ISOFIX lower anchorages provid-

ed for this seat. Using the out-

board seat anchorages can dam-

age the anchorages which may

break or fail in a collision result-

ing in serious injury or death.

ISOFIX Lower

Anchorage Position

Indicator

2

ISOFIX Lower Anchorage

OLM039035

OLMB033050

ISOFIX lower anchorages have been

provided in the left and right outboard

rear seating positions. Their locations

are shown in the illustration. There

are no ISOFIX lower anchorages pro-

vided for the center rear seating posi-

tion.

The ISOFIX lower anchorages posi-

tion indicator symbols are located on

the left and right rear seat backs to

identify the position of the ISOFIX

lower anchorages in your vehicle (see

arrows in illustration).

2-43

Safety system of your vehicle

Securing a child restraint with

the “ISOFIX Anchorages System”

WARNING

To install a ISOFIX-compatible child

restraint in either of the rear outboard

seating positions:

Take the following precautions

when using the ISOFIX system:

• Read and follow all installation

instructions provided with

your child restraint system.

1. Move the seat belt buckle away

from the ISOFIX lower anchorages.

2. Move any other objects away from

the anchors that could prevent a

secure connection between the

child restraint and the ISOFIX lower

anchorages.

• To prevent the child from

reaching and taking hold of

unretracted seat belts, buckle

all unused rear seat belts and

retract the seat belt webbing

behind the child. Children can

be strangled if a shoulder belt

becomes wrapped around

their neck and the seat belt

tightens.

OLMB033051

Both rear outboard seats are

equipped with a pair of ISOFIX lower

anchorages as well as a correspon-

ding top-tether anchorage on the

back side of the rear seats.

3. Place the child restraint on the vehi-

cle seat, then attach the seat to the

ISOFIX lower anchorages accord-

ing to the instructions provided by

the child restraint manufacturer.

(CRS with universal approval to ECE-

R44 need to be fixed additionally with

a top-tether strap connected to the

corresponding top-tether anchorage

point on the back side of the rear

seats.)

4. Follow the child restraint instruc-

tions for properly adjusting and

tightening the lower attachments on

the child restraint to the ISOFIX

lower anchorages.

• NEVER attach more than one

child restraint to a single

anchorage. This could cause

the anchor or attachment to

come loose or break.

• Always have the ISOFIX sys-

tem inspected by your dealer

after an accident. An accident

can damage the ISOFIX sys-

tem and may not properly

secure the child restraint.

ISOFIX lower anchorages are locat-

ed between the seatback and the

seat cushion of the rear seat left and

right outboard seating positions.

2-44

(Continued)

WARNING

• Child restraint anchorages are

designed to withstand only

those loads imposed by cor-

rectly fitted child restraints.

Take the following precautions

when installing the top-tether

strap:

2

• Read and follow all installa-

tion instructions provided

with your child restraint sys-

tem.

Under no circumstances are

they to be used for adult seat

belts or harnesses or for

attaching other items or

equipment to the vehicle.

• NEVER attach more than one

child restraint to a single

ISOFIX top-tether anchorage.

This could cause the anchor-

age or attachment to come

loose or break.

OLMB033047

Installing the top-tether strap

First, secure the child restraint with

the ISOFIX lower anchorages or the

seat belt. If the child restraint manu-

facturer recommends that the top-

tether strap be attached, attach and

tighten the top-tether strap to the

ISOFIX top-tether anchorage.

• Do not attach the top-tether

strap to anything other than

the correct ISOFIX top-tether

anchorage. It may not work

properly if attached to some-

thing else.

ISOFIX top-tether anchorages are

located on the back of the rear seats.

(Continued)

2-45

Safety system of your vehicle

3. Check that the child restraint is

securely attached to the seat by

pushing and pulling the seat for-

ward and from side-to-side.

OLMB033048

To install the top-tether strap:

1. Route the child restraint top-tether

strap over the child restraint seat-

back. Route the top-tether strap

under the headrest and between

the headrest posts, or route the

tether strap over the top of the

vehicle seatback. Make sure the

strap is not twisted.

2. Connect the top-tether strap hook

to the ISOFIX top-tether anchorage,

then tighten the top-tether strap

according to your child restraint

instructions to firmly secure the

child restraint to the seat.

2-46

Child Seat Restraint for Vehicle ISOFIX Positions – For Europe

Vehicle ISOFIX Positions

Rear Outboard Rear Outboard

Mass Group

Size Class

Fixture

2

Front Passenger

Rear Center

(Driver side)

(Passenger side)

F

G

E

ISO/L1

ISO/L2

ISO/R1

ISO/R2

ISO/R3

ISO/R2

ISO/R3

ISO/F2

ISO/F2X

ISO/F3

-

X

-

Carrycot

X

0 : UP to 10kg

IUF

E

0+ : UP to 13kg

D

C

D

C

B

I : 9 to 18kg

B1

A

IUF = Suitable for ISOFIX forward child restraints systems of universal

category approved for use in the mass group.

A - ISO/F3: Full-Height Forward-Facing toddler CRS (height 720mm)

B - ISO/F2: Reduced-Height Forward-Facing toddler CRS (height

650mm)

IL = Suitable for particular ISOFIX child restraints systems (CRS) given

in the attached list. These ISOFIX CRS are those of the "specific

vehicle", "restricted" or "semi-universal" categories.

B1 - ISO/F2X: Reduced-Height Second Version Back Surface Shape

Forward-Facing toddler CRS (height 650mm)

X = ISOFIX position not suitable for ISOFIX child restraint system in

this mass group and/or this size class.

C - ISO/R3: Full-Size Rearward-Facing toddler CRS

D - ISO/R2: Reduced-Size Rearward-Facing toddler CRS

E - ISO/R1: Infant-Size Rearward-Facing CRS

* Both ISO/R2 and ISO/R3 are able to be set up only at the foremost

position of the passenger seat.

F - ISO/L1: Left Lateral Facing position CRS (carry-cot)

G - ISO/L2: Right Lateral Facing position CRS (carry-cot)

* ISOFIX child restraint system size classes and fixtures

2-47

Safety system of your vehicle

Recommended Child Seat Restraint Systems – For Europe

ECE-R44

Approval No.

Mass Group

Name

Manufacturer

FAIR S.r.l

Type of Fixation

Rearward facing with vehicle

specific ISOFIX platform type "D"

FAIR G0/1 S

Baby Safe Plus

FAIR G0/1 S

E4 04443718

E1 04301146

E4 04443718

E1 04301133

Group 0-1

(0-18kg)

Britax Römer

FAIR S.r.l

With vehicle 3-point safety seatbelt

Forward facing with vehicle

specific ISOFIX platform type "A"

Group 1

(9-18kg)

Vehicle ISOFIX lower anchorage

+ Top-Tether

Britax Römer

Duo Plus

With vehicle 3-point safety seatbelt

CRS manufacturer information

FAIR S.r.l

http://www.fairbimbofix.com

Britax Römer http://www.britax.com

2-48

2. Fasten the lap belt latch into the

buckle. Listen for the distinct “click”

sound.

Securing a child restraint with

a lap belt or lap/shoulder belt

When not using the ISOFIX anchor-

ages system, all child restraints must

be secured to a vehicle rear seat with

the lap belt or the lap part of a

lap/shoulder belt.

3. Adjust the lap belt for a snug hold

on the child restraint by pulling the

loose end of the belt.

2

4. Push and pull on the child restraint

system to confirm that the seat

belt is holding it firmly in place.

WARNING

ALWAYS place a rear-facing

child restraint in the rear seat of

the vehicle.

If your CRS manufacturer instructs or

recommends you use a ISOFIX top-

tether anchorage with the lap belt,

see page 2-45.

OLMB033043

Installing a child restraint with a

lap belt

Placing

a

rear-facing child

To install a child restraint system on

the center rear seats, do the follow-

ing:

restraint in the front seat can

result in serious injury or death

if the child restraint is struck by

an inflating air bag.

To remove the child restraint, press

the release button on the buckle and

then pull the lap belt out of the

restraint.

1.Place the child restraint system on

the center rear seat and route the

lap belt through the restraint, fol-

lowing the restraint manufacturer’s

instructions.

Be sure the seat belt webbing is

not twisted.

2-49

Safety system of your vehicle

OLMB033044

OLMB033045

OLMB033046

2. Fasten the lap/shoulder belt latch

into the buckle. Listen for the dis-

tinct “click” sound.

3. Remove as much slack from the

belt as possible by pushing down

on the child restraint system while

feeding the shoulder belt back into

the retractor.

Installing a child restraint with a

lap/shoulder belt

To install a child restraint system on

the rear seats, do the following:

1. Place the child restraint system on

a rear seat and route the lap/shoul-

der belt around or through the

restraint, following the restraint

manufacturer’s instructions.

✽

NOTICE

4. Push and pull on the child restraint

system to confirm that the seat belt

is holding it firmly in place.

Position the release button so that it

is easy to access in case of an emer-

gency.

If your CRS manufacturer instructs or

recommends you use a ISOFIX top-

tether anchorage with the lap/shoul-

der belt, see page 2-45.

Be sure the seat belt webbing is not

twisted.

✽

NOTICE

To remove the child restraint, press

the release button on the buckle and

then pull the lap/shoulder belt out of

the restraint and allow the seat belt

to retract fully.

When using the rear center seat belt,

you should also refer to “3-point Rear

Center Seat Belt” in this chapter.

2-50

.

Child Seat Restraint Suitability for Seat Position using the Seat Belt - For Europe

Use child safety seats that have been officially approved and are appropriate for your children.

When using the child safety seats, refer to the following table.

2

Seating Position

WARNING

Age Group

: Up to 10 kg

(0 - 9 months)

Front passenger Rear outboard

Rear center

U

0

We recommend that a child

restraint seat be installed in the

rear seat, even if the front pas-

senger's air bag ON/OFF switch

is set to the OFF position. To

ensure the safety of your child,

the front passenger’s air bag

must be deactivated when it

should be necessary to install a

child restraint seat on the front

passenger seat in exceptional

circumstances.

U*

U

0+ : Up to 13 kg

(0 - 2 years)

U

I : 9 kg to 18 kg

(9 months - 4 years)

II & III : 15 kg to 36 kg

(4 - 12 years)

U : Suitable for "universal" category restraints approved for use in this mass group

U* : Suitable for "universal" category restraints approved for use in this mass group (Seat posi-

tion : foremost, Seat back : upright)

2-51

Safety system of your vehicle -> Child Restraint System (CRS) for Your Hyundai Ix35 SUV Second Generation (2016-2023)

Related Topics

Popular Owner Manuals

Latest Owner Manuals