JD eng 6.QXP 3/12/2015 3:05 PM Page 21
What to do in an emergency
Using the TireMobilityKit
1. Filling the sealant
9) Switch off the compressor.
10) Detach the hose from the
sealant bottle connector and
from the tire valve.
Strictly follow the specified sequence,
otherwise the sealant may escape
under high pressure.
Return the TireMobilityKit to its stor-
age location in the vehicle.
1) Shake the sealant bottle.
WARNING
Carbon monoxide poisoning
and suffocation is possible if the
engine is left running in a poorly
ventilated or unventilated loca-
tion (such as inside a building).
OGDE064101
6) Ensure that the compressor is
switched off, position 0.
7) Connect between compressor
and the vehicle power outlet using
the cable and connectors.
OYN064021
✽
NOTICE
Only use the front passenger side
power outlet.
2) Connect the filling hose 2 onto the
connector of the sealant bottle (A).
3) Ensure that button 6 on the com-
pressor is not pressed.
8) With the ignition switched on:
4) Unscrew the valve cap from the
valve of the defective wheel and
screw filling hose 2 of the sealant
bottle onto the valve.
Switch on the compressor and let it
run for approximately 3 minutes to fill
the sealant. The inflation pressure of
the tire after filling is unimportant.
5) Insert the sealant bottle into the
housing of the compressor so that
the bottle is upright (B).
6 21
English 
