2004-2010 Kia Picanto 4 Door Features of your vehicle -> Audio system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Features of your vehicle -> Audio system for Your Kia Picanto 4 Door First Generation (2004-2010)

Features of your vehicle  
AUDIO SYSTEM  
Type A  
CAUTION  
• Before entering a place with a low  
height clearance, be sure that the  
antenna is fully folded down (type  
A only) or removed.  
• Be sure to remove the antenna  
before washing the car in an auto-  
matic car wash or it may be dam-  
aged.  
• When reinstalling your antenna,  
it is important that it is fully tight-  
ened and adjusted to the upright  
position to ensure proper recep-  
tion.  
OSA0470220  
Type B  
OPB049135  
Antenna  
Roof antenna  
Your vehicle uses a roof antenna to  
receive both AM and FM broadcast sig-  
nals. This antenna can be adjusted up  
and down (type A only) or removed from  
the vehicle. To remove the antenna, turn  
it counterclockwise. To install the anten-  
na, turn it clockwise.  
4 77  
Features of your vehicle  
FM reception  
AM(MW, LW) reception  
FM radio station  
¢
¢
¢
¢
¢
¢
JBM001  
JBM002  
JBM003  
D300800AUN  
AM(MW, LW) broadcasts can be  
received at greater distances than FM  
broadcasts. This is because AM(MW,  
LW) radio waves are transmitted at low  
frequencies. These long, low frequency  
radio waves can follow the curvature of  
the earth rather than travelling straight  
out into the atmosphere. In addition, they  
curve around obstructions so that they  
can provide better signal coverage.  
FM broadcasts are transmitted at high  
frequencies and do not bend to follow the  
earth's surface. Because of this, FM  
broadcasts generally begin to fade at  
short distances from the station. Also,  
FM signals are easily affected by build-  
ings, mountains, or other obstructions.  
These can result in certain listening con-  
ditions which might lead you to believe a  
problem exists with your radio. The fol-  
lowing conditions are normal and do not  
indicate radio trouble:  
How car audio works  
AM(MW, LW) and FM radio signals are  
broadcast from transmitter towers locat-  
ed around your city. They are intercept-  
ed by the radio antenna on your car. This  
signal is then received by the radio and  
sent to your car speakers.  
When a strong radio signal has reached  
your vehicle, the precise engineering of  
your audio system ensures the best pos-  
sible quality reproduction. However, in  
some cases the signal coming to your  
vehicle may not be strong and clear. This  
can be due to factors such as the dis-  
tance from the radio station, closeness of  
other strong radio stations or the pres-  
ence of buildings, bridges or other large  
obstructions in the area.  
4 78  
Features of your vehicle  
Using a cellular phone or a two-way  
radio  
When a cellular phone is used inside the  
vehicle, noise may be produced from the  
audio equipment. This does not mean  
that something is wrong with the audio  
equipment. In such a case, use the cellu-  
lar phone at a place as far as possible  
from the audio equipment.  
¢
¢
¢
CAUTION  
JBM004  
JBM005  
When using a communication sys-  
tem such a cellular phone or a radio  
set inside the vehicle, a separate  
external antenna must be fitted.  
When a cellular phone or a radio set  
is used with an internal antenna  
alone, it may interfere with the vehi-  
cle's electrical system and adverse-  
ly affect safe operation of the vehi-  
cle.  
• Fading - As your car moves away from  
the radio station, the signal will weaken  
and sound will begin to fade. When this  
occurs, we suggest that you select  
another stronger station.  
• Station Swapping - As a FM signal  
weakens, another more powerful sig-  
nal near the same frequency may  
begin to play. This is because your  
radio is designed to lock onto the clear-  
est signal. If this occurs, select anoth-  
er station with a stronger signal.  
• Flutter/Static - Weak FM signals or  
large obstructions between the trans-  
mitter and your radio can disturb the  
signal causing static or fluttering nois-  
es to occur. Reducing the treble level  
may lessen this effect until the distur-  
bance clears.  
• Multi-Path Cancellation - Radio signals  
being received from several directions  
can cause distortion or fluttering. This  
can be caused by a direct and reflect-  
ed signal from the same station, or by  
signals from two stations with close  
frequencies. If this occurs, select  
another station until the condition has  
passed.  
WARNING  
Don't use a cellular phone when  
you are driving. You should stop at  
a safe place to use a cellular phone.  
4 79  
Features of your vehicle  
Stereo radio operation (M445) (if equipped)  
1. FM/AM Selection Button  
2. Automatic Channel Selection Button  
3. Power ON/OFF  
4. Preset Button  
5. TUNE/AUDIO Control Button  
6. SCAN Button  
7. AUTO STORE Button  
SA-M445  
4 80  
Features of your vehicle  
1. FM/AM Selection Button  
4. Preset Button  
Push [1]~[6]button less than 0.8 second  
to play the channel saved in each button.  
7. AUTO STORE Button  
Turns to FM/AM mode and toggles FM1  
and FM2➟AM➟FM1··· when the button is  
pressed each time.  
When the button is pressed, it automati-  
cally selects and saves channels with  
high reception rate to PRESET but-  
tons(1~6) and plays the channel saved in  
PRESET1.  
Push preset button for 0.8 second or  
longer to save the current channel to the  
respective button with a beep.  
2. Automatic Channel Selection  
Button  
If no channel is saved after AST, it will  
play the previous channel.  
When the [SEEK  
] button is pressed, it  
5. TUNE/AUDIO Control Button  
reduces the band frequency by 100KHz  
to automatically select a channel.  
Turn this button clockwise by one notch  
to increase frequency by 100KHz from  
current frequency.  
CAUTION  
Stops at the previous frequency if no  
channel is found.  
• Do not place beverages close to  
the audio system. The audio sys-  
tem mechanism may be damaged  
if you spill them.  
Turn this button counterclockwise by one  
notch to decrease frequency by 100KHz  
from current frequency.  
When the [SEEK  
] button is pressed, it  
increases the band frequency by 100KHz  
to automatically select a channel.  
Turns to AUDIO CONTROL mode, and  
toggles in the order of BASS➟MIDDLE  
➟TREBLE➟FADER➟BALANCE➟···BAS  
S··· when the button is pressed each  
time.  
• Do not strike or allow anything to  
impact the audio system, damage  
to the system mechanisms could  
occur.  
Stops at the previous frequency if no  
channel is found.  
3. Power ON/OFF & Volume Control  
Button  
6. SCAN Button  
Plays the first 10 seconds of each chan-  
nel, when the button is pressed.  
Turns ON/OFF when the IGNITION  
SWITCH is on ACC or ON.  
If the button is turned to the right, it  
increases the volume and the button is  
turned to the left, decreases the volume.  
To cancel the mode, press the button  
once again.  
4 81  
Features of your vehicle  
Compact disc player operation (M445) (if equipped)  
1. CD Loading Slot  
2. CD Selection Button  
3. CD Eject Button  
4. AUX Selection Button  
5. REW/FF Button  
6. RANDOM Button  
7. REPEAT Button  
8. SCAN Button  
9. Automatic Track Selection Button  
SA-M445  
4 82  
Features of your vehicle  
1. CD Loading Slot  
Insert the CD with the label facing  
upward.  
5. Rewind / Fast Forward Button  
7. REPEAT Button  
Repeats the current song when the but-  
ton is pressed for less than 0.8 second.  
• Rewind Button  
Press and hold [2 REW] button while  
playing a CD then the player will play  
the disk backwards 5 times the regular  
speed for the first 5 seconds and 15  
times faster after that. The sound will  
be reduced by 12dB while you are  
holding the button.  
When the ignition switch is on ACC or  
ON and the power is OFF, the power is  
automatically turned on if the CD is  
loaded.  
Repeats the entire disc when the button  
is pressed for 0.8 second or longer.  
8. SCAN Button  
Plays the first 10 seconds of each chan-  
nel.  
This CDP supports 12cm CDs. But if  
VCD. Data CD, MP3 CD are loaded,  
"Disc-Err" message will appear and the  
CD will be ejected.  
• Fast Forward Button  
To cancel the mode, press the button  
once again.  
Press and hold [3 FF] button while  
playing a CD then the player will play  
the disk forward 5 times the regular  
speed for the first 5 seconds and 15  
times faster after that. The sound will  
be reduced by 12dB while you are  
holding the button.  
2. CD Selection Button  
9. Automatic Track Selection Button  
If there is a CD in the CDP deck, it turns  
to the CD mode when the button is  
pressed each time.  
• Push [SEEK  
] button for less than  
0.8 second to play from the beginning  
of the current song.  
• Push [SEEK  
0.8 second and press again within 1  
second to play the previous song.  
] button for less than  
3. CD Eject Button  
6. RANDOM (RDM) Button  
Push button to eject the CD during  
CD playback.  
You can listen to the tracks in random,  
rather than sequential order.  
To use random, do the following:  
• Push [SEEK  
or longer to rewind the current song.  
• Push [SEEK ] button for less than  
0.8 second to play the next song.  
• Push [SEEK ] button for less than  
] button for 0.8 second  
This button is enabled when ignition  
switch is off.  
Press the RDM button to listen to record-  
ed tracks in random sequence. Press  
RDM again to cancel.  
4. AUX Selection Button  
If the auxiliary device is connected, it  
turns to the AUX mode to play the sound  
from the auxiliary player.  
0.8 second or longer to fast-foward the  
current song.  
If there is no disc and the auxiliary device  
is not connected, it will not turn to the  
AUX mode.  
4 83  
Features of your vehicle  
✽
NOTICE  
(Continued)  
CAUTION  
• To assure proper operation of the unit,  
keep the vehicle interior temperature  
within a normal range by using the  
vehicle's air conditioning or heating  
system.  
• When replacing the fuse, replace it  
with a fuse having the correct capaci-  
ty.  
• All stored bookmarks are erased  
when the car battery is disconnected  
or power to the vehicle is lost. If this  
occurs, the bookmarks will have to be  
reset.  
• This equipment is designed to be used  
only in a 12 volt DC battery system  
with negative ground.  
• Avoid using recorded compact  
discs in your audio unit. Original  
compact discs are recommended  
for best results.  
• Do not insert warped or poor  
quality discs into the CD player  
as damage to the unit may occur.  
• Do not insert anything such as  
coins into the player slot as dam-  
age to the unit may occur.  
• Do not place beverages close to  
the audio system. It may damage  
the playback mechanism if you  
spill them.  
WARNING  
When driving your vehicle, be sure  
to keep the volume of the unit set  
low enough to allow you to hear  
sounds coming from the outside.  
• Do not strike or allow anything to  
impact the audio system, damage  
to the system mechanisms could  
occur.  
• Off-road or rough surface driving  
may cause the compact disc to  
skip. Do not use the compact  
disc when driving in such condi-  
tions as damage to the compact  
disc face could occur.  
• This unit is made of precision parts.  
Do not attempt to disassemble or  
adjust any parts.  
• Do not expose this equipment (includ-  
ing the speakers and CD) to water or  
excessive moisture.  
• Do not attempt to grab or pull the  
compact disc out while the disc is  
being pulled into the audio unit  
by self-loading mechanism.  
Damage to the audio unit and  
compact disc could occur.  
(Continued)  
4 84  
Features of your vehicle  
Stereo radio operation (PA710) (if equipped)  
1. FM Selection Button  
2. AM Selection Button  
3. CD Selection Button  
4. Power ON/OFF & Volume Control Button  
5. Automatic Channel Selection Button  
6. INFO Button  
7. AUX Selection Button  
8. AUTO STORE Button  
9. SET UP Button  
10. ENTER/TUNE Button  
11. Preset Button  
SA-PA710A  
4 85  
Features of your vehicle  
1. FM Selection Button  
5. Automatic Channel Selection  
Button  
8. AUTO STORE Button  
Turns to FM mode and toggles FM1 ➟  
FM2➟FM1··· when the button is pressed  
each time.  
When the button is pressed, it automati-  
cally selects and saves channels with  
high reception rate to PRESET buttons  
(1~6) and plays the channel saved in  
PRESET1.  
• When the [SEEK  
]button is pressed,  
it reduces the band frequency by  
100Khz to automatically select a chan-  
nel.  
2. AM Selection Button  
Turns to AM mode and toggles AM when  
the button is pressed each time.  
If no channel is saved after the AUTO  
STORE button is pressed, it will play the  
previous channel.  
Stops at the previous frequency if no  
channel is found.  
• When the [SEEK  
]button is pressed,  
it increases the band frequency by  
100khz to automatically select a chan-  
nel.  
3. CD Selection Button  
9. SET UP Button  
Press this button to turn to the SOUND,  
SCROLL adjustment mode.  
If there is a CD in the CDP deck it turns  
to the CD mode when the button is  
pressed each time.  
Stops at the previous frequency if no  
channel is found.  
If no action is taken for 5 seconds after  
pressing the button, it will return to the  
play mode.(After entering SET UP mode,  
move between items using the left, right  
and PUSH functions of the TUNE button.)  
4. Power ON/OFF & Volume Control  
Button  
6. INFO Button  
Displays the information of the channel  
currently played by RDS.  
• Turns on/off when the IGNITION  
SWITCH is on ACC or ON. If the button  
is turned to the right, it increases the  
volume and left, decreases the vol-  
ume.  
The SET UP item changes from SOUND  
(BASS, MIDDLE, TREBLE, FADER,  
BALANCE, RETURN) ➟ SCROLL (ON,  
OFF) ➟ RETURN.  
7. AUX Selection Button  
If the auxiliary device is connected, it  
turns to AUX MODE to play the sound  
from the auxiliary player.  
• In AUX mode, the volume and tone  
(BASS, MID, TRE) are adjusted in a  
separate way.  
If there is no disc and the auxiliary device  
is not connected, it displays "NO MEDIA"  
for 5 seconds and returns to the previous  
mode.  
If you pull out AUX from a jack and  
insert it again, then only volume goes  
back to 10-step.  
4 86  
Features of your vehicle  
10. TUNE/ENTER Button  
11. Preset Button  
Push [1]~[6] buttons less than 0.8 second  
to play the channel saved in each button.  
Turn this button clockwise by one notch  
to increase frequency by 100Khz from  
current frequency.  
Push the preset button for 0.8 second or  
longer to save the current channel to the  
respective button with a beep.  
Turn this button counterclockwise by one  
notch to decrease frequency by 100Khz  
from current frequency.  
Press this button while holding SET UP  
button to activate / inactivate the item.  
CAUTION  
• Do not place beverages close to  
the audio system. It may damage  
the audio system mechanism if  
you spill them.  
Select SET UP item using left and right  
function of the Tune button.  
• Do not strike or allow anything to  
impact the audio system, damage  
to the system mechanisms could  
occur.  
4 87  
Features of your vehicle  
Compact disc player operation (PA710) (if equipped)  
1. CD Loading Slot  
2. CD Eject Button  
3. CD Selection Button  
4. Automatic Track Selection Button  
5. INFO Button  
6. ENTER/TUNE Button  
7. REPEAT Button  
8. RANDOM Button  
9. AST (CD SCAN) Button  
10. FOLDER Moving Button  
UR-200SAD-CD  
4 88  
Features of your vehicle  
1. CD Loading Slot  
Insert the CD with the label facing  
upward.  
7. REPEAT Button  
Repeats current song when the button is  
pressed for less than 0.8 second.  
• Push [SEEK  
or longer to rewind the current song.  
• Push [SEEK ] button for less than  
0.8 second to play the next song.  
• Push [SEEK ] button for less than  
] button for 0.8 second  
When the ignition switch is on ACC or  
ON and the power is off, the power is  
automatically turned on if the CD is  
loaded.  
Repeats the entire disc when the button  
is pressed for 0.8 second or longer.  
0.8 second or longer to fast-foward the  
current song.  
8. RANDOM (RDM) Button  
You can listen to the tracks in random,  
rather than sequential order.  
To use random, do the following:  
This CDP supports 12 cm CDs. But if  
VCD, Data CD, MP3 CD are loaded, "Er-  
6" message will appear and the CD will  
be ejected.  
5. INFO Button  
Displays the information of the current  
CD TRACK in the order of DISC  
TITLE➟DISC ARTIST➟TRACK TITLE➟  
TRACK ARTIST➟TOTAL TRACK➟ Play  
Screen➟DISC TITLE➟···.(It is not dis-  
played if the information is not available  
on the disc.) (If MP3 is displayed FILE  
NAME➟ TITLE➟ ARTIST➟ ALBUM➟  
FOLDER➟TOTAL FILE➟FILE NAME➟···)  
Press the RDM button to listen to record-  
ed tracks in random sequence. Press  
RDM again to cancel.  
2. CD Eject Button  
Push  
button to eject the CD during  
CD playback. This button is enabled  
when ignition switch is off.  
9. AST(CD SCAN) Button  
Plays the first 10 seconds of each song  
in the disc.  
3. CD Selection Button  
To cancel the mode, press the key once  
again.  
If there is a CD in the CDP deck, it turns  
to the CD mode when the button is  
pressed each time.  
6. ENTER/TUNE Button  
Turn this button clockwise to display  
songs after the current song.  
10. FOLDER Moving Button  
• Moves [FLDR  
] button child folder of  
4. Automatic Track Selection Button  
Also, turn this button counterclockwise to  
display songs before the current song.  
the current folder and displays the first  
song in the folder. Press ENT/TUNE  
button to move to the folder displayed.  
It will play the first song in the folder.  
• Push [SEEK  
] button for less than  
To listen to the displayed song, press the  
button to skip to the song and play.  
0.8 second to play from the beginning  
of the current song.  
• Push [SEEK  
] button for less than  
• Moves [FLDR  
] button parent folder  
0.8 second and press again within 1  
seconds to play the previous song.  
and displays the first song in the folder.  
Press ENT/TUNE button to move to  
the folder displayed. It will play the first  
song in the folder.  
4 89  
Features of your vehicle  
✽
NOTICE  
(Continued)  
CAUTION  
• To assure proper operation of the unit,  
keep the vehicle interior temperature  
within a normal range by using the  
vehicle's air conditioning or heating  
system.  
• When replacing the fuse, replace it  
with a fuse having the correct capaci-  
ty.  
• The preset station frequencies are all  
erased when the car battery is discon-  
nected. Therefore, all data will have to  
be set again if this should occur.  
• Do not add any oil to the rotating  
parts. Keep magnets, screwdrivers  
and other metallic objects away from  
the tape mechanism and head.  
• This equipment is designed to be used  
only in a 12 volt DC battery system  
with negative ground.  
• Avoid using recorded compact  
discs in your audio unit. Original  
compact discs are recommended  
for best results.  
• Do not insert warped or poor  
quality discs into the CD player  
as damage to the unit may occur.  
• Do not insert anything like coins  
into the player slot as damage to  
the unit may occur.  
• Do not place beverages close to  
the audio system. It may damage  
the playback mechanism if you  
spill them.  
WARNING  
When driving your vehicle, be sure  
to keep the volume of the unit set  
low enough to allow you to hear  
sounds coming from the outside.  
• Do not strike or allow anything to  
impact the audio system, damage  
to the system mechanisms could  
occur.  
• Off-road or rough surface driving  
may cause the compact disc to  
skip. Do not use the compact  
disc when driving in such condi-  
tions as damage to the compact  
disc face could occur.  
• This unit is made of precision parts.  
Do not attempt to disassemble or  
adjust any parts.  
• Do not expose this equipment (includ-  
ing the speakers and tape) to water or  
excessive moisture.  
• Do not attempt to grab or pull the  
compact disc out while the disc is  
being pulled into the audio unit  
by self-loading mechanism.  
Damage to the audio unit and  
compact disc could occur.  
(Continued)  
4 90  
Features of your vehicle  
USB (PA710) (if equipped)  
1. AUX(USB) Selection Button  
2. Track Moving Button  
3. INFO Button  
4. Folder moving Button  
5. ENTER/TUNE Button  
6. RANDOM Button  
7. REPEAT Button  
8. SCAN Button  
SA-PA710C  
4 91  
Features of your vehicle  
In case USB is connected to the multi-  
media jack inside the consol on the right  
hand side of the driver’s seat. When USB  
is connected, the ‘USB’ icon will be dis-  
played on the top right corner of the dis-  
play screen.  
3. INFO Button  
6. RANDOM Button  
Displays the information of the file cur-  
rently played in the order of FILE NAME  
➟TITLE➟ARTIST➟ALBUM➟FOLDER➟  
TOTAL FILE➟FILE NAME➟… (Displays  
no information if the file has no song  
information.)  
Press the button for less than 0.8 second  
to start or stop the random playback of  
the songs in the current folder.  
Press the button for more than 0.8 sec-  
ond to randomly play the entire songs in  
the USB device.  
1. AUX(USB) Selection Button  
Press the button again to cancel the mode.  
If the USB is connected, it switches to the  
USB mode from the CD mode to play the  
song files stored in the USB.  
4. Folder moving Button  
• If [FLDR  
] button is pressed, it  
7. REPEAT Button  
Press the button for less than 0.8 second  
to repeat the song currently played.  
moves to the child folder of the current  
folder and displays the first song in the  
folder. Press ENTER/TUNE button to  
move to the folder displayed. It will play  
the first song in the folder.  
If there are no CD and USB(AUX), it dis-  
plays ‘NO MEDIA’.  
Press the button for more than 0.8 sec-  
ond to repeat the entire songs in the USB  
device.  
2. Track Moving Button  
• Press the [SEEK  
] button for less  
• If [FLDR  
] is button pressed, it  
than 0.8 second to play from the begin-  
ning of the song currently played.  
moves to the parent folder and displays  
the first song in the folder. Press  
ENTER/TUNE button to move to the  
folder displayed. It will play the first  
song in the folder.  
8. SCAN Button  
Plays 10 seconds of each song in the  
USB device.  
Press the button for less than 0.8 sec-  
ond and press it again within 1 second  
to play the previous track.  
Press the button once again to cancel  
scanning.  
Press the button for 0.8 second or  
longer to play the song in reverse  
direction in fast speed.  
5. ENTER/TUNE Button  
Turn this button clockwise to display the  
songs next to the currently played song.  
• Press the [SEEK  
] button for less  
Turn the button counterclockwise to dis-  
play the songs before the currently  
played song.  
than 0.8 second to move to the next  
track. Press the button for 0.8 second  
or longer to play the song in forward  
direction in fast speed.  
Press the button to skip to the selected  
song.  
4 92  
Features of your vehicle  
(Continued)  
(Continued)  
CAUTION IN USING  
USB DEVICE  
• To use the external USB device,  
make sure the device is not  
mounted when starting up the  
vehicle and mount the device  
after starting up.  
• Depending on the condition of  
the external USB device, the con-  
nected external USB device can  
be unrecognizable.  
• If you dismount the external USB  
device during playback in USB  
mode, the external USB device  
can be damaged or malfunction.  
Therefore, mount the external  
USB device when the engine is  
turned off or in another mode.  
• When the formatted byte/sector  
setting of External USB devices is  
not either 512BYTE or 2048BYTE,  
then the device will not be recog-  
nized.  
• If you start the vehicle when the  
USB device is mounted, it may  
damage the USB device. (USB is  
not ESA)  
• Depending on the type and  
capacity of the external USB  
device or the type of the files  
stored in the device, there is a dif-  
ference in the time taken for  
recognition of the device, but this  
is not an indicator of trouble and  
you only have to wait.  
• The USB device should only be  
formatted to FAT 12/16/32.  
• If the vehicle is started up or  
turned off while the external USB  
device is connected, the external  
USB device may not work.  
• USB device without USB I/F  
authentication may not be recog-  
nizable.  
• Make sure the USB connection  
terminal does not come in con-  
tact with human body or any  
object.  
• It may not play inauthentic MP3 or  
WMA files.  
• Do not use the USB device for  
other purposes than playing  
music files.  
1) It can only play MP3 files with  
the compression rate between  
8Kbps~320Kbps.  
• Use of USB accessories such as  
recharger or heater using USB I/F  
may lower the performance or  
cause trouble.  
• If you repeat mounting or dis-  
mounting USB device in a short  
period of time, it may break the  
device.  
2) It can only play WMA music  
files with the compression rate  
between 8Kbps~320Kbps.  
• If you use devices such as a USB  
hub you purchased separately,  
the vehicle’s audio system may  
not recognize the USB device.  
Connect the USB device directly  
to the multimedia terminal of the  
vehicle.  
• You might hear a strange noise  
when mounting or dismounting a  
USB device.  
• Take cautions for static electricity  
when mounting or dismounting  
the external USB device.  
(Continued)  
• An encoded MP3 PLAYER is not  
recognizable.  
(Continued)  
(Continued)  
4 93  
Features of your vehicle  
(Continued)  
(Continued)  
• If USB device is divided by logical  
drives, only the music files on the  
highest-priority drive are recog-  
nized by car audio.  
• Please avoid using USB memory  
products which can be used as  
key chains or cellular phone  
accessories as they could cause  
damage to the USB jack. Please  
make certain only to use plug  
type connector products as  
shown below.  
• Devices such as MP3 Player/  
Cellular phone/Digital camera  
those are not recognizable by  
standard USB I/F can be unrecog-  
nizable.  
• USB devices other than standard-  
ized goods (METAL COVER TYPE  
USB) can be unrecognizable.  
• USB flash memory reader (such  
as CF, SD, microSD, etc.) or exter-  
nal-HDD type devices can be  
unrecognizable.  
• Music files protected by DRM  
(DIGITAL RIGHTS MANAGEMENT)  
are not recognizalbe.  
• The data in the USB memory may  
lost while using this AUDIO, It is  
recommeded to back up impor-  
tant data on a personal.  
(Continued)  
4 94  
Features of your vehicle  
RUNNING iPod (PA710) (if equipped)  
1. AUX(iPod) Selection Button  
2. Track Moving Button  
3. INFO Button  
4. Category Selection Button  
5. ENTER/TUNE Button  
6. RANDOM Button  
7. REPEAT Button  
❈ iPod is a trademark of Apple Inc.  
SA-PA710D  
4 95  
Features of your vehicle  
In case the iPod exclusive cable is con-  
nected to the multimedia jack inside the  
consol on the right hand side of the dri-  
ver’s seat. When the iPod is connected,  
the ‘iPod’ icon will be displayed on the top  
right corner of the display screen.  
5. ENTER/TUNE Button  
Turn this button clockwise to display the  
songs next to the currently played song.  
• Press the [SEEK  
] button for less  
than 0.8 second to move to the next  
track. Press the button for 0.8 second  
or longer to play the song in forward  
direction in fast speed.  
Turn the button counterclockwise to dis-  
play the songs before the currently  
played song.  
Press the button to skip to the selected  
song.  
3. INFO Button  
1. AUX(iPod) Selection Button  
Displays the information of the file cur-  
rently played in the order of FILE NAME  
➟TITLE➟ARTIST➟ALBUM➟FOLDER➟  
TOTAL FILE➟FILE NAME➟… (Displays  
no information if the file has no song  
information.)  
If iPod is connected, it switches to the  
iPod mode from the CD mode to play the  
song files stored in the iPod.  
6. RANDOM Button  
Press the button for less than 0.8 second  
to start or stop the random playback of  
the songs in the current folder.  
If there are no CD and AUX(iPod), it dis-  
plays ‘NO MEDIA’  
Press the button for longer than 0.8 sec-  
ond to randomly play all songs in the  
entire album of the iPod.  
2. Track Moving Button  
4. Category Selection Button  
Moves to the upper category from cur-  
rently played category of the iPod.  
• Press the [SEEK  
] button for less  
than 0.8 second to play from the begin-  
ning of the song currently played.  
Press the button again to cancel the mode.  
You will be able to search through the  
lower category of the selected category.  
Press the button for less than 0.8 sec-  
ond and press it again within 1 second  
to play the previous track.  
7. REPEAT Button  
Repeats the song currently played.  
The order of iPod’s category is SONG,  
ALBUMES, ARTISTS, GENRES, and  
iPod. (Refer to the iPod user’s manual for  
more information)  
Press the button for 0.8 second or  
longer to play the song in reverse  
direction in fast speed.  
4 96  
Features of your vehicle  
✽
NOTICE FOR USING iPod  
DEVICE  
(Continued)  
CAUTION IN USING iPod  
DEVICE  
• When the iPod cable is connect-  
ed, the system can be switched to  
the AUX mode even without the  
iPod device and can cause noise.  
Disconnect the iPod cable when  
you are not using the iPod device.  
• Some iPod models might not support  
the communication protocol and the  
files will not be played. (iPod models  
supported: Mini, 4G, Photo, Nano,  
5G)  
• The order of search or playback of  
songs in the iPod can be different  
from the order searched in the audio  
system.  
• You need the power cable exclu-  
sive for an iPod in order to oper-  
ate an iPod with the buttons on  
the audio system. The PC cable  
provided by Apple may cause a  
malfunction and do not use it for  
vehicle use.  
• When the iPod is not used for the  
audio system, the iPod cable has  
to be separate from iPod devices.  
Origin display of iPod may not be  
displayed.  
• When connecting the device with  
an iPod cable, push in the jack  
fully to not to interfere with com-  
munication.  
• If the iPod crashes due to its own  
trouble, reset the iPod. (Reset: Refer  
to iPod manual)  
• When adjusting the sound effects  
of an iPod and the audio system,  
the sound effects of both devices  
will overlap and might reduce or  
distort the quality of the sound.  
• iPod may not operate normally on  
low battery.  
• Deactivate (turn off) the equalizer  
function of an iPod when adjust-  
ing the audio system's volume,  
and turn off the equalizer of the  
audio system when using the  
equalizer of an iPod.  
(Continued)  
4 97  
Features of your vehicle  
Stereo radio operation (H000) (if equipped)  
1. FM/AM Selection Button  
2. CD Selection Button  
3. TA Selection Button  
4. Power ON/OFF & Volume Control Button  
5. Automatic Channel Selection Button  
6. INFO Button  
7. AUX Selection Button  
8. AUTO STORE Button  
9. SET UP Button  
10. ENTER/TUNE Button  
11. Preset Button  
SA-H000A  
4 98  
Features of your vehicle  
1. FM/AM Selection Button  
5. Automatic Channel Selection  
Button  
8. AUTO STORE Button  
Turns to FM/AM mode and toggles in the  
order of FM1➟FM2➟FMA➟AM➟AMA➟  
FM1··· when the button is pressed each  
time.  
• When you press the [AST] button, the  
mode changes to 'Auto store Band'  
and it saves the result. (FM1 or FM2  
changes to FMA, AM changes to  
AMA.)  
• When the [SEEK  
]button is pressed,  
it reduces the band frequency by  
50khz to automatically select a chan-  
nel. Stops at the previous frequency if  
no channel is found.  
• When the button is pressed, it auto-  
matically selects and saves channels  
with high reception rate to PRESET  
buttons (1~6) and plays the channel  
saved in PRESET1.  
2. CD Selection Button  
If there is a CD in the CDP DECK it turns  
to CD mode when the button is pressed  
each time.  
• When the [SEEK  
]button is pressed,  
it increases the band frequency by  
50khz to automatically select a channel.  
Stops at the previous frequency if no  
channel is found.  
If no channel is saved after the AUTO  
STORE button is pressed, it will play  
the previous channel.  
3. TA Selection Button  
In the FM, CD and AUX mode, you may  
turn on/off the reception of the TA chan-  
nels of RDS.  
6. INFO Button  
Displays the information of the channel  
currently played by RDS.  
9. SET UP Button  
Press this button to turn to the SOUND,  
RDS option, SCROLL adjustment mode.  
4. Power ON/OFF & Volume Control  
Button  
7. AUX Selection Button  
If no action is taken for 5 seconds after  
pressing the button, it will return to the  
play mode.(After entering SET UP mode,  
• Turns on/off when the IGNITION  
SWITCH is on ACC or ON. If the button  
is turned to the right, it increases the  
volume and left, decreases the vol-  
ume.  
If the auxiliary device is connected, it  
turns to AUX MODE to play the sound  
from the auxiliary player.  
move between items using the left, right  
and PUSH functions of the TUNE but-  
ton.)  
If there is no disc and the auxiliary device  
is not connected, it displays "NO MEDIA"  
for 5 seconds and returns to the previous  
mode.  
• In AUX mode, the volume and tone  
(BASS, MID, TRE) are adjusted in a  
separate way.  
The SET UP item changes from SOUND  
(BASS, MIDDLE, TREBLE, FADER,  
BALANCE, RETURN) ➟ RDS(AF, REG,  
NEWS, PTY, VOLUME, RETURN) ➟  
SCROLL (ON, OFF) ➟ RETURN.  
If you pull out AUX from a jack and  
insert it again, then only volume goes  
back to 10-step.  
4 99  
Features of your vehicle  
10. ENTER/TUNE Button  
11. Preset Button  
Push [1]~[6] buttons less than 0.8 second  
to play the channel saved in each button.  
Turn this button clockwise by one notch  
to increase frequency by 0.05Mhz from  
current frequency.  
Push the Preset button for 0.8 second or  
longer to save the current channel to the  
respective button with a beep.  
Turn this button counterclockwise by one  
notch to decrease frequency by 0.05Mhz  
from current frequency.  
Press this button while holding the SET  
UP button to activate/inactivate the item.  
CAUTION  
• Do not place beverages close to  
the audio system. It may damage  
the playback mechanism if you  
spill them.  
Select a SET UP item using the left and  
right function of the Tune button.  
• Do not strike or allow anything to  
impact the audio system, damage  
to the system mechanisms could  
occur.  
4 100  
Features of your vehicle  
Compact disc player (H000) (if equipped)  
1. CD Loading Slot  
2. CD Eject Button  
3. CD Selection Button  
4. Automatic Track Selection Button  
5. INFO Button  
6. ENTER/TUNE Button  
7. REPEAT Play Button  
8. RANDOM Play Button  
9. AST (CD SCAN) Play Button  
10. FOLDER Moving Button  
UR-200SAE-CD  
4 101  
Features of your vehicle  
1. CD Loading Slot  
Insert the CD with the label facing  
upward.  
8. RANDOM (RDM) Button  
• Push [SEEK  
0.8 second to play the next song.  
• Push [SEEK ] button for less than  
0.8 second or longer to fast-foward the  
current song.  
] button for less than  
You can listen to the tracks in random,  
rather than sequential order.  
To use random, do the following:  
When the ignition switch is on ACC or  
ON and the power is off, the power is  
automatically turned on if the CD is  
loaded.  
Press the RDM button to listen to record-  
ed tracks in random sequence. Press  
RDM again to cancel.  
5. INFO Button  
This CDP supports 12 cm CDs. But if  
VCD, Data CD, MP3 CD are loaded, "Er-  
6" message will appear and the CD will  
be ejected.  
Displays the information of the current  
CD TRACK in the order of DISC  
TITLE➟DISC ARTIST➟TRACK TITLE➟  
TRACK ARTIST➟TOTAL TRACK➟ Play  
Screen➟DISC TITLE➟···.(It is not dis-  
played if the information is not available  
on the disc.) (If MP3 is displayed  
FILE NAME➟TITLE➟ARTIST➟ALBUM➟  
FOLDER➟TOTAL FILE➟FILE NAME➟ ···)  
9. AST(CD SCAN) Play Button  
Plays the first 10 seconds of each song  
in the disc.  
To cancel the mode, press the key once  
again.  
2. CD Eject Button  
Push  
button to eject the CD during  
CD playback. This button is enabled  
when ignition switch is off.  
10. FOLDER Moving Button  
• Moves [FLDR  
] button child folder of  
the current folder and displays the first  
song in the folder. Press ENT/TUNE  
button to move to the folder displayed.  
It will play the first song in the folder.  
6. ENTER/TUNE Button  
Turn this button clockwise to display  
songs after the current song.  
3. CD Selection Button  
If there is a CD in the CDP deck, it turns  
to the CD mode when the button is  
pressed each time.  
Also, turn this button counterclockwise to  
display songs before the current song.  
• Moves [FLDR  
] button parent folder  
and displays the first song in the folder.  
Press ENT/TUNE button to move to  
the folder displayed. It will play the first  
song in the folder.  
To listen to the displayed song, press the  
button to skip to the song and play.  
4. Automatic Track Selection Button  
• Push [SEEK  
] button for less than  
0.8 second to play from the beginning  
of the current song.  
7.REPEAT Button  
Repeats current song when the button is  
pressed for less than 0.8 second.  
• Push [SEEK  
] button for less than  
0.8 second and press again within 1  
seconds to play the previous song.  
Repeats the entire disc when the button  
is pressed for 0.8 second or longer.  
• Push [SEEK ] button for 0.8 second  
or longer to rewind the current song.  
4 102  
Features of your vehicle  
✽
NOTICE  
(Continued)  
CAUTION  
• To assure proper operation of the unit,  
keep the vehicle interior temperature  
within a normal range by using the  
vehicle's air conditioning or heating  
system.  
• When replacing the fuse, replace it  
with a fuse having the correct capaci-  
ty.  
• All stored bookmarks are erased  
when the car battery is disconnected  
or power to the vehicle is lost. If this  
occurs, the bookmarks will have to be  
reset.  
• This equipment is designed to be used  
only in a 12 volt DC battery system  
with negative ground.  
• Avoid using recorded compact  
discs in your audio unit. Original  
compact discs are recommended  
for best results.  
• Do not insert warped or poor  
quality discs into the CD player  
as damage to the unit may occur.  
• Do not insert anything like coins  
into the player slot as damage to  
the unit may occur.  
• Do not place beverages close to  
the audio system. It may damage  
the playback mechanism if you  
spill them.  
WARNING  
When driving your vehicle, be sure  
to keep the volume of the unit set  
low enough to allow you to hear  
sounds coming from the outside.  
• Do not strike or allow anything to  
impact the audio system, damage  
to the system mechanisms could  
occur.  
• Off-road or rough surface driving  
may cause the compact disc to  
skip. Do not use the compact  
disc when driving in such condi-  
tions as damage to the compact  
disc face could occur.  
• This unit is made of precision parts.  
Do not attempt to disassemble or  
adjust any parts.  
• Do not expose this equipment (includ-  
ing the speakers and CD) to water or  
excessive moisture.  
• Do not attempt to grab or pull the  
compact disc out while the disc is  
being pulled into the audio unit  
by the self-loading mechanism.  
Damage to the audio unit and  
compact disc could occur.  
(Continued)  
4 103  
Features of your vehicle  
USB (H000) (if equipped)  
1. AUX(USB) Selection Button  
2. Track Moving Button  
3. INFO Button  
4. Folder moving Button  
5. ENTER/TUNE Button  
6. RANDOM Button  
7. REPEAT Button  
8. SCAN Button  
SA-H000B  
4 104  
Features of your vehicle  
In case USB is connected to the multi-  
media jack inside the consol on the right  
hand side of the driver’s seat. When USB  
is connected, the ‘USB’ icon will be dis-  
played on the top right corner of the dis-  
play screen.  
3. INFO Button  
6. RANDOM Button  
Displays the information of the file cur-  
rently played in the order of FILE NAME  
➟TITLE➟ARTIST➟ALBUM➟FOLDER➟  
TOTAL FILE➟FILE NAME➟… (Displays  
no information if the file has no song  
information.)  
Press the button for less than 0.8 second  
to start or stop the random playback of  
the songs in the current folder.  
Press the button for more than 0.8 sec-  
ond to randomly play the entire songs in  
the USB device.  
1. AUX(USB) Selection Button  
Press the button again to cancel the mode.  
If USB is connected, it switches to the  
USB mode from the CD mode to play the  
song files stored in the USB.  
4. Folder moving Button  
• If [FLDR  
] button is pressed, it  
7. REPEAT Button  
Press the button for less than 0.8 second  
to repeat the song currently played.  
moves to the child folder of the current  
folder and displays the first song in the  
folder. Press ENTER/TUNE button to  
move to the folder displayed. It will play  
the first song in the folder.  
If there are no CD and USB(AUX), it dis-  
plays ‘NO MEDIA’.  
Press the button for more than 0.8 sec-  
ond to repeat the entire songs in the USB  
device.  
2. Track Moving Button  
• Press the [SEEK  
] button for less  
• If [FLDR  
] is button pressed, it  
than 0.8 second to play from the begin-  
ning of the song currently played.  
moves to the parent folder and displays  
the first song in the folder. Press  
ENTER/TUNE button to move to the  
folder displayed. It will play the first  
song in the folder.  
8. SCAN Button  
Plays 10 seconds of each song in the  
USB device.  
Press the button for less than 0.8 sec-  
ond and press it again within 1 second  
to play the previous track.  
Press the button once again to cancel  
scanning.  
Press the button for 0.8 second or  
longer to play the song in reverse  
direction in fast speed.  
5. ENTER/TUNE Button  
Turn this button clockwise to display the  
songs next to the currently played song.  
• Press the [SEEK  
] button for less  
Turn the button counterclockwise to dis-  
play the songs before the currently  
played song.  
than 0.8 second to move to the next  
track. Press the button for 0.8 second  
or longer to play the song in forward  
direction in fast speed.  
Press the button to skip to the selected  
song.  
4 105  
Features of your vehicle  
(Continued)  
(Continued)  
CAUTION IN USING  
USB DEVICE  
• To use the external USB device,  
make sure the device is not  
mounted when starting up the  
vehicle and mount the device  
after starting up.  
• Depending on the condition of  
the external USB device, the con-  
nected external USB device can  
be unrecognizable.  
• If you dismount the external USB  
device during playback in USB  
mode, the external USB device  
can be damaged or malfunction.  
Therefore, mount the external  
USB device when the engine is  
turned off or in another mode.  
• When the formatted byte/sector  
setting of External USB devices is  
not either 512BYTE or 2048BYTE,  
then the device will not be recog-  
nized.  
• If you start the vehicle when the  
USB device is mounted, it may  
damage the USB device. (USB is  
not ESA)  
• Depending on the type and  
capacity of the external USB  
device or the type of the files  
stored in the device, there is a dif-  
ference in the time taken for  
recognition of the device, but this  
is not an indicator of trouble and  
you only have to wait.  
• Use only a USB device formatted  
to FAT 12/16/32.  
• If the vehicle is started up or  
turned off while the external USB  
device is connected, the external  
USB device may not work.  
• USB device without USB I/F  
authentication may not be recog-  
nizable.  
• Make sure the USB connection  
terminal does not come in con-  
tact with human body or any  
object.  
• It may not play inauthentic MP3 or  
WMA files.  
• Do not use the USB device for  
other purposes than playing  
music files.  
1) It can only play MP3 files with  
the compression rate between  
8Kbps~320Kbps.  
• Use of USB accessories such as  
recharger or heater using USB I/F  
may lower the performance or  
cause trouble.  
• If you repeat mounting or dis-  
mounting USB device in a short  
period of time, it may break the  
device.  
2) It can only play WMA music  
files with the compression rate  
between 8Kbps~320Kbps.  
• If you use devices such as a USB  
hub you purchased separately,  
the vehicle’s audio system may  
not recognize the USB device.  
Connect the USB device directly  
to the multimedia terminal of the  
vehicle.  
• You might hear a strange noise  
when mounting or dismounting a  
USB device.  
• Take cautions for static electricity  
when mounting or dismounting  
the external USB device.  
(Continued)  
• An encoded MP3 PLAYER is not  
recognizable.  
(Continued)  
(Continued)  
4 106  
Features of your vehicle  
(Continued)  
(Continued)  
• If USB device is divided by logical  
drives, only the music files on the  
highest-priority drive are recog-  
nized by car audio.  
• Please avoid using USB memory  
products which can be used as  
key chains or cellular phone  
accessories as they could cause  
damage to the USB jack. Please  
make certain only to use plug  
type connector products as  
shown below.  
• Devices such as MP3 Player/  
Cellular phone/Digital camera  
those are not recognizable by  
standard USB I/F can be unrecog-  
nizable.  
• USB devices other than standard-  
ized goods (METAL COVER TYPE  
USB) can be unrecognizable.  
• USB flash memory reader (such  
as CF, SD, microSD, etc.) or exter-  
nal-HDD type devices can be  
unrecognizable.  
• Music files protected by DRM  
(DIGITAL RIGHTS MANAGEMENT)  
are not recognizalbe.  
• The data in the USB memory may  
lost while using this AUDIO, It is  
recommeded to back up impor-  
tant data on a personal.  
(Continued)  
4 107  
Features of your vehicle  
RUNNING iPod (H000) (if equipped)  
1. AUX(iPod ) Selection Button  
2. Track Moving Button  
3. INFO Button  
4. Category Selection Button  
5. ENTER/TUNE Button  
6. RANDOM Button  
7. REPEAT Button  
SA-PA710F  
4 108  
Features of your vehicle  
In case the iPod exclusive cable is con-  
nected to the multimedia jack inside the  
consol on the right hand side of the dri-  
ver’s seat. When the iPod is connected,  
the ‘iPod’ icon will be displayed on the top  
right corner of the display screen.  
5. ENTER/TUNE Button  
Turn this button clockwise to display the  
songs next to the currently played song.  
• Press the [SEEK  
] button for less  
than 0.8 second to move to the next  
track. Press the button for 0.8 second  
or longer to play the song in forward  
direction in fast speed.  
Turn the button counterclockwise to dis-  
play the songs before the currently  
played song.  
Press the button to skip to the selected  
song.  
3. INFO Button  
1. AUX(iPod) Selection Button  
Displays the information of the file cur-  
rently played in the order of FILE NAME  
➟TITLE➟ARTIST➟ALBUM➟FOLDER➟  
TOTAL FILE➟FILE NAME➟… (Displays  
no information if the file has no song  
information.)  
If iPod is connected, it switches to the  
iPod mode from the CD mode to play the  
song files stored in the iPod.  
6. RANDOM Button  
Press the button for less than 0.8 second  
to activate or deactivate the random play-  
back of the songs within the current cat-  
egory.  
If there are no CD and AUX(iPod), it dis-  
plays ‘NO MEDIA’.  
2. Track Moving Button  
Press the button for longer than 0.8 sec-  
ond to randomly play all songs in the  
entire album of the iPod.  
4. Category Selection Button  
Moves to the upper category from cur-  
rently played category of the iPod.  
• Press the [SEEK  
] button for less  
than 0.8 second to play from the begin-  
ning of the song currently played.  
Press the button once again to cancel  
the mode.  
You will be able to search through the  
lower category of the selected category.  
Press the button for less than 0.8 sec-  
ond and press it again within 1 second  
to play the previous track.  
The order of iPod’s category is SONG,  
ALBUMES, ARTISTS, GENRES, and  
iPod. (Refer to the iPod user’s manual for  
more information)  
7. REPEAT Button  
Repeats the song currently played.  
Press the button for 0.8 second or  
longer to play the song in reverse  
direction in fast speed.  
4 109  
Features of your vehicle  
✽
NOTICE FOR USING iPod  
DEVICE  
(Continued)  
CAUTION IN USING iPod  
DEVICE  
• When the iPod cable is connect-  
ed, the system can be switched to  
the AUX mode even without the  
iPod device and can cause noise.  
Disconnect the iPod cable when  
you are not using the iPod device.  
• Some iPod models might not support  
the communication protocol and the  
files will not be played. (iPod models  
supported: Mini, 4G, Photo, Nano,  
5G)  
• The order of search or playback of  
songs in the iPod can be different  
from the order searched in the audio  
system.  
• You need the power cable exclu-  
sive for an iPod in order to oper-  
ate an iPod with the buttons on  
the audio system. The PC cable  
provided by Apple may cause a  
malfunction and do not use it for  
vehicle use.  
• When the iPod is not used for the  
audio system, the iPod cable has  
to be separate from iPod devices.  
Origin display of iPod may not be  
displayed.  
• When connecting the device with  
an iPod cable, push in the jack  
fully to not to interfere with com-  
munication.  
• If the iPod crashes due to its own  
trouble, reset the iPod. (Reset: Refer  
to iPod manual)  
• When adjusting the sound effects  
of an iPod and the audio system,  
the sound effects of both devices  
will overlap and might reduce or  
distort the quality of the sound.  
• iPod may not operate normally on  
low battery.  
• Deactivate (turn off) the equalizer  
function of an iPod when adjust-  
ing the audio system's volume,  
and turn off the equalizer of the  
audio system when using the  
equalizer of an iPod.  
(Continued)  
4 110  

Related Topics

Features of your vehicle
Keys Remote keyless entry (if equipped) Theft-alarm system (if equipped) Door locks Tailgate Windows Hood Fuel filler lid Steering wheel Mirrors Instrument cluster Rear parking assist system (if equipped) Hazard warning flasher Lighting Wipers and washers Interior light Defroster Manual climate control system (if equipped) Automatic climate control system (if equipped) Windshield defrosting and defogging Storage compartment Interior features

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot