2011-2017 Kia Picanto 4 Door Safety features of your vehicle -> Child restraint system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety features of your vehicle -> Child restraint system for Your Kia Picanto 4 Door Second Generation (2011-2017)

Safety features of your vehicle  
CHILD RESTRAINT SYSTEM  
Children riding in the car should sit in the  
rear seat and must always be properly  
restrained to minimize the risk of injury in  
an accident, sudden stop or sudden  
maneuver. According to accident statis-  
tics, children are safer when properly  
restrained in the rear seats than in the  
front seat. Larger children not in a child  
restraint should use one of the seat belts  
provided.  
WARNING  
WARNING  
To reduce the chance or serious or  
fatal injuries:  
• A child restraint system must be  
placed in the rear seat. Never  
install a child or infant seat on the  
front passenger's seat. Should an  
accident occur and cause the  
passenger side air bag to deploy,  
it could severely injure or kill an  
infant or child seated in an infant  
or child seat. Thus only use a  
child restraint in the rear seat of  
your vehicle.  
• Children of all ages are safer  
when restrained in the rear seat.  
A child riding in the front passen-  
ger seat can be forcefully struck  
by an inflating air bag resulting in  
serious or fatal injuries.  
You should be aware of the specific  
requirements in your country. Child  
and/or infant safety seats must be prop-  
erly placed and installed in the rear seat.  
You must use a commercially available  
child restraint system that meets the  
requirements of the Safety Standards of  
your country. Child restraint systems are  
designed to be secured in vehicle seats  
by lap belts or the lap belt portion of a  
lap/shoulder belt, or by a tether anchor  
and/or ISOFIX anchors (if equipped).  
• Always follow the child restraint  
system manufacturer’s instruc-  
tions for installation and use of  
the child restraint.  
• A seat belt or child restraint sys-  
tem can become very hot if it is  
left in a closed vehicle on a sunny  
day, even if the outside tempera-  
ture does not feel hot. Be sure to  
check the seat cover and buckles  
before placing a child there.  
• Always make sure the child seat  
is secured properly in the car and  
your child is securely restrained  
in the child seat.  
• Never hold a child in your arms or  
lap when riding in a vehicle. The  
violent forces created during a  
crash will tear the child from your  
arms and throw the child against  
the car’s interior.  
• When the child restraint system  
is not in use, store it in the lug-  
gage area or fasten it with a seat  
belt so that it will not be thrown  
forward in the case of a sudden  
stop or an accident.  
Children could be injured or killed in a  
crash if their restraints are not properly  
secured. For small children and babies, a  
child seat or infant seat must be used.  
Before buying a particular child restraint  
system, make sure it fits your car seat  
and seat belts, and fits your child. Follow  
all the instructions provided by the man-  
ufacturer when installing the child  
restraint system.  
• Never put a seat belt over your-  
self and a child. During a crash,  
the belt could press deep into the  
child causing serious internal  
injuries.  
• Children may be seriously injured  
or killed by an inflating air bag.  
All children, even those too large  
for child restraints, must ride in  
the rear seat.  
(Continued)  
3 28  
Safety features of your vehicle  
Rearward-facing child restraint system  
(Continued)  
(Continued)  
• Never leave children unattended  
in a vehicle – not even for a short  
time. The car can heat up very  
quickly, resulting in serious  
injuries to children inside. Even  
very young children may inadver-  
tently cause the vehicle to move,  
entangle themselves in the win-  
dows, or lock themselves or oth-  
ers inside the vehicle.  
• Never use an infant carrier or a  
child safety seat that "hooks" over  
a seatback, it may not provide ade-  
quate security in an accident.  
• Seat belts can become very hot,  
especially when the car is parked  
in direct sunlight. Always check  
seat belt buckles before fasten-  
ing them over a child.  
CRS09  
Forward-facing child restraint system  
• After an accident, we recommend  
that the system be checked by an  
authorized Kia dealer.  
• Never allow two children, or any  
two persons, to use the same  
seat belt.  
• If there is not enough space to  
place the child restraint system  
because of the driver's seat,  
install the child restraint system  
in the rear right seat.  
• Children often squirm and repo-  
sition themselves improperly.  
Never let a child ride with the  
shoulder belt under their arm or  
behind their back. Always prop-  
erly position and secure children  
in rear seat.  
• Always store or secure a child  
seat, even when it is not in use.  
During a collision or sudden  
stop, the child seat could be  
thrown inside the vehicle.  
OTA030015  
• Never allow a child to stand-up or  
kneel on the seat or floorboard of  
a moving vehicle. During a colli-  
sion or sudden stop, the child  
can be violently thrown against  
the vehicles interior, resulting in  
serious injury.  
Using a child restraint system  
For small children and babies, the use of  
a child seat or infant seat is required.This  
child seat or infant seat should be of  
appropriate size for the child and should  
be installed in accordance with the man-  
ufacturer's instructions.  
(Continued)  
3 29  
Safety features of your vehicle  
For safety reasons, we recommend that  
the child restraint system be used in the  
rear seats.  
WARNING - Child seat  
installation  
• A child can be seriously injured  
or killed in a collision if the child  
restraint is not properly anchored  
to the car and the child is not  
properly restrained in the child  
restraint. Before installing the  
child restraint system, read the  
instructions supplied by the child  
restraint system manufacturer.  
WARNING  
Never place a rear-facing child  
restraint in the front passenger  
seat, because of the danger that an  
inflating passenger-side air bag  
could impact the rear-facing child  
restraint and kill the child.  
E2MS103005  
• If the seat belt does not operate  
as described in this section, we  
recommend that the system be  
checked by an authorized Kia  
dealer.  
Installing a child restraint system by  
lap/shoulder belt  
To install a child restraint system on the  
outboard or center rear seats, do the fol-  
lowing:  
• Failure to observe this manual's  
instructions regarding child  
restraint systems and the  
instructions provided with the  
child restraint system could  
increase the chance and/or  
severity of injury in an accident.  
1. Place the child restraint system in the  
seat and route the lap/shoulder belt  
around or through the restraint, follow-  
ing the restraint manufacturer’s  
instructions. Be sure the seat belt web-  
bing is not twisted.  
• If the vehicle headrest prevents  
proper installation of a child seat  
(as described in the child seat sys-  
tem manual), the headrest of the  
respective seating position shall  
be readjusted or entirely removed.  
3 30  
Safety features of your vehicle  
E2BLD310  
MMSA3030  
E2BLD347  
2. Fasten the lap/shoulder belt latch into  
the buckle. Listen for the distinct “click”  
sound.  
3. Buckle the seat belt and allow the seat  
belt to take up any slack. After installa-  
tion of the child restraint system, try to  
move it in all directions to be sure the  
child restraint system is securely  
installed.  
Installing a child restraint system by  
lap belt (on the center rear seat)  
(if equipped) - Except Europe  
Position the release button so that it is  
easy to access in case of an emergency.  
To install a child restraint system on the  
center rear seats, do the following:  
1. Place the child restraint system on the  
center rear seat.  
If you need to tighten the belt, pull more  
webbing toward the retractor. When you  
unbuckle the seat belt and allow it to  
retract, the retractor will automatically  
revert back to its normal seated passen-  
ger emergency locking usage condition.  
WARNING  
2. Extend the latch plate tongue of the  
lap belt.  
A child can be seriously injured or  
killed in a collision if the child  
restraint is not properly anchored  
to the car and the child is not prop-  
erly restrained in the child restraint.  
Always follow the child seat manu-  
facturer’s instructions for installa-  
tion and use.  
3. Route the lap belt through the restraint  
according to the seat manufacturer’s  
instructions.  
4. Buckle the seat belt and adjust the lap  
belt for a snug hold on the child  
restraint by pulling on the loose end of  
the belt. After installation of the child  
restraint system, try to move it in all  
directions to be sure the child restraint  
system is securely installed.  
3 31  
Safety features of your vehicle  
WARNING - Tether strap  
• A child can be seriously injured  
or killed in a collision if the child  
restraint is not properly anchored  
to the car and the child is not  
properly restrained in the child  
restraint. Always follow the child  
seat manufacturer’s instructions  
for installation and use.  
• Never mount more than one child  
restraint to a single tether or to a  
single lower anchorage point.The  
increased load caused by multi-  
ple seats may cause the tethers  
or anchorage points to break,  
causing serious injury or death.  
OTA030028  
OTA030016  
Securing a child restraint seat with  
“Tether Anchor” system  
(if equipped)  
1. Route the child restraint seat strap  
over the seatback.  
For vehicles with adjustable headrest,  
route the tether strap under the head-  
rest and between the headrest posts,  
otherwise route the tether strap over  
the top of the seatback.  
Child restraint hook holders are located  
on the floor behind the rear seats.  
WARNING - Child restraint  
check  
2. Connect the tether strap hook to the  
appropriate child restraint hook holder  
and tighten to secure the child restraint  
seat.  
Check that the child restraint sys-  
tem is secure by pushing and  
pulling it in different directions.  
Incorrectly fitted child restraints  
may swing, twist, tip or separate  
causing death or serious injury.  
3 32  
Safety features of your vehicle  
WARNING  
- Child restraint anchorage  
• Child restraint anchorages are  
designed to withstand only those  
loads imposed by correctly fitted  
child restraints. Under no circum-  
stances are they to be used for  
adult seat belts or harnesses or  
for attaching other items or  
equipment to the vehicle.  
• The tether strap may not work  
properly if attached somewhere  
other than the correct tether  
anchor.  
1SAE3090A  
OTA030014  
Securing a child restraint system  
with “ISOFIX” system and “Tether  
Anchorage” system (if equipped)  
There is a child restraint symbol located  
on the lower portion of each side of the  
rear seatbacks. These symbols indicate  
the position of the lower anchors for child  
restraints so equipped.  
ISOFIX is a standardised method of fit-  
ting child seats that eliminates the need  
to use the standard adult seat belt to  
secure the seat in the vehicle. This  
enables a much more secure and posi-  
tive location with the added benefit of  
easier and quicker installation.  
An ISOFIX-seat can only be installed if it  
has vehicle-specific approval in accor-  
dance with the requirements of ECE-  
R44.  
3 33  
Safety features of your vehicle  
To secure the child restraint seat  
Both rear outboard seats are equipped  
with a pair of ISOFIX anchorages as well  
as a corresponding top tether anchorage  
on the back side of the back rest. The  
ISOFIX anchorages are located between  
seat cushion and back rest, marked with  
the ISOFIX icon.  
WARNING  
1. To engage the child restraint seat to  
the ISOFIX anchor, insert the child  
restraint seat latch into the ISOFIX  
anchor. Listen for the audible “click”  
sound.  
Install the child restraint seat fully  
rearward against the seatback with  
the seatback in a vertical position,  
not reclined.  
For installation, CRS ISOFIX connecters  
have to engage with the vehicles ISOFIX  
anchorages (listen for a CLICK, check  
potential visual indicators on the CRS  
and cross-check by pulling).  
CAUTION  
Do not allow the rear seat belt web-  
bing to get scratched or pinched by  
the ISOFIX-seat latch and ISOFIX  
anchor during the installation.  
WARNING  
• When using the vehicle's  
"ISOFIX" system to install a child  
restraint system in the rear seat,  
all unused vehicle rear seat belt  
metal latch plates or tabs must be  
latched securely in their seat belt  
buckles and the seat belt web-  
bing must be retracted behind  
the child restraint to prevent the  
child from reaching and taking  
hold of unretracted seat belts.  
Unlatched metal latch plates or  
tabs may allow the child to reach  
the unretracted seat belts which  
may result in strangulation and a  
serious injury or death to the  
child in the child restraint.  
CRS with universal approval to ECE-R  
44 need to be fixed additionally with a top  
tether strap connected to the correspon-  
ding top tether anchorage point in the  
back rest.  
2. Connect the tether strap hook to the  
child restraint hook holder and tighten  
to secure the seat. (Refer to the previ-  
ous page.)  
The installing and the use of a child-seat  
has to be done according to the  
installing-manual, which is added to the  
ISOFIX-seat.  
• Do not place anything around the  
lower anchors. Also make sure  
that the seat belt is not caught in  
the lower anchors.  
3 34  
Safety features of your vehicle  
(Continued)  
WARNING  
• Attach the ISOFIX or ISOFIX-com-  
patible child restraint seat only to  
the appropriate locations shown  
in the illustration.  
• Do not install a child restraint  
seat at the center of the rear seat  
using the vehicle's ISOFIX  
anchors. The ISOFIX anchors are  
only provided for the left and  
right outboard rear seating posi-  
tions. Do not misuse the ISOFIX  
anchors by attempting to attach a  
child restraint seat in the middle  
of the rear seat to the ISOFIX  
anchors.  
• Always follow the installation and  
use instructions provided by the  
manufacturer of the child restraint.  
In a crash, the child restraint seat  
ISOFIX attachments may not be  
strong enough to secure the child  
restraint seat properly in the cen-  
ter of the rear seat and may  
break, causing serious injury or  
death.  
• Do not mount more than one  
child restraint to a child restraint  
lower anchorage point. The  
improper increased load may  
cause the anchorage points or  
tether anchor to break, causing  
serious injury or death.  
(Continued)  
3 35  
Safety features of your vehicle  
Child Seat Restraint Suitability For Seat Position using the Seat Belt  
- For Europe  
WARNING  
We recommend that  
a
child  
Use child safety seats that have been officially approved and are appropriate for your  
children. When using the child safety seats, refer to the following table.  
restraint seat be installed in the  
rear seat, even if the front passen-  
ger's air bag ON/OFF switch is set  
to the OFF position. To ensure the  
safety of your child, the front pas-  
senger’s air bag must be deactivat-  
ed when it should be necessary to  
install a child restraint seat on the  
front passenger seat in exceptional  
circumstances.  
Seating Position  
Age Group  
Front passenger  
Rear outboard  
Rear center  
U
0
: Up to 10 kg  
(0 - 9 months)  
U
U
0+ : Up to 13 kg  
(0 - 2 years)  
U
U
U
U
U
U
U
U
U
I : 9 kg to 18 kg  
(9 months - 4 years)  
II & III : 15 kg to 36 kg  
(4 - 12 years)  
U : Suitable for "universal" category restraints approved for use in this mass group  
3 36  
Safety features of your vehicle  
Child seat restraint suitability for vehicle ISOFIX positions - For Europe  
vehicle ISOFIX positions  
Mass Group  
Size Class  
Fixture  
Rear Outboard  
(Driver side)  
Rear Outboard  
(Passenger side)  
Front Passenger  
Rear Center  
F
G
E
ISO/L1  
ISO/L2  
ISO/R1  
ISO/R1  
ISO/R2  
ISO/R3  
ISO/R2  
ISO/R3  
ISO/F2  
ISO/F2X  
ISO/F3  
-
-
-
-
-
-
-
-
-
-
-
X
X
X
X
-
-
-
-
-
-
-
-
-
-
-
Carrycot  
0 : UP to 10kg  
X
X
E
X
X
0+ : UP to 13kg  
D
C
D
C
B
X
X
X
X
X
X
X
X
I : 9 to 18kg  
IUF  
IUF  
IUF  
IUF  
IUF  
IUF  
B1  
A
IUF = Suitable for ISOFIX forward child restraints systems of universal  
category approved for use in the mass group.  
A - ISO/F3: Full-Height Forward-Facing toddler CRS (height 720mm)  
B - ISO/F2: Reduced-Height Forward-Facing toddler CRS (height  
650mm)  
IL = Suitable for particular ISOFIX child restraints systems (CRS) given  
in the attached list. These ISOFIX CRS are those of the "specific  
vehicle", "restricted" or "semi-universal" categories.  
B1 - ISO/F2X: Reduced-Height Second Version Back Surface Shape  
Forward-Facing toddler CRS (height 650mm)  
X = ISOFIX position not suitable for ISOFIX child restraint system in  
this mass group and/or this size class.  
C - ISO/R3: Full-Size Rearward-Facing toddler CRS  
D - ISO/R2: Reduced-Size Rearward-Facing toddler CRS  
E - ISO/R1: Infant-Size Rearward-Facing CRS  
* Both ISO/R2 and ISO/R3 are able to be set up only at the foremost  
position of the passenger seat.  
F - ISO/L1: Left Lateral Facing position CRS (carry-cot)  
G - ISO/L2: Right Lateral Facing position CRS (carry-cot)  
* ISOFIX child restraint system size classes and fixtures  
3 37  
Safety features of your vehicle  
Recommended child restraint systems – For Europe  
ECE-R44  
Approval No.  
Mass Group  
Name  
Manufacturer  
FAIR  
Type of Fixation  
E4 03443416 (Seat)  
Rearward facing with vehicle  
specific ISOFIX platform type “A”  
Bimbo G0/1 S  
Baby-Safe Plus II  
Duo Plus  
E4 0443718 (Platform)  
Group 0-1  
(0-18kg)  
Britax Römer  
Britax Römer  
Rearward facing with ISOFIX adapter  
E1 04301146  
E1 04301133  
Group 1  
(9-18kg)  
Forward facing with vehicle ISOFIX  
lower anchorage + Top tether  
CRS Manufacturer information  
FAIR  
Britax Römer  
3 38  

Related Topics

Popular Owner Manuals