2011-2017 Kia Picanto 4 Door Safety features of your vehicle -> Seats User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety features of your vehicle -> Seats for Your Kia Picanto 4 Door Second Generation (2011-2017)

Safety features of your vehicle  
SEATS  
Driver’s seat  
(1) Forward and rearward  
(2) Seatback angle  
(3) Seat cushion height*  
(4) Seat warmer*  
(5) Headrest  
Front passenger’s seat  
(6) Forward and rearward  
(7) Seatback angle  
(8) Seat warmer*  
(9) Walk-in seat (for 3 door vehicle only)  
(10) Headrest  
Rear seat  
(11) Headrest*  
(12) Seatback folding*  
* : if equipped  
WARNING - Loose objects  
Loose objects in the driver’s foot  
area could interfere with the opera-  
tion of the foot pedals, possibly  
causing an accident. Do not place  
anything under the front seats.  
OTA032001L  
3 2  
Safety features of your vehicle  
(Continued)  
WARNING - Uprighting  
seat  
WARNING  
• Always drive and ride with your  
seatback upright and the lap por-  
tion of the seat belt snug and low  
across the hips. This is the best  
position to protect you in case of  
an accident.  
Do not use a sitting cushion that  
reduces friction between the seat  
and passenger. The passenger's  
hips may slide under the lap por-  
tion of the seat belt during an acci-  
dent or a sudden stop. Serious or  
fatal internal injuries could result  
because the seat belt can't operate  
normally.  
When you return the seatback to its  
upright position, hold the seatback  
and return it slowly and be sure  
there are no other occupants  
around the seat. If the seatback is  
returned without being held and  
controlled, the back of the seat  
could spring forward resulting in  
accidental injury to a person struck  
by the seatback.  
• In order to avoid unnecessary  
and perhaps severe air bag  
injuries, always sit as far back as  
possible from the steering wheel  
while maintaining comfortable  
control of the vehicle. We recom-  
mend that your chest be at least  
250 mm (10 inches) away from  
the steering wheel.  
WARNING - Driver’s seat  
• Never attempt to adjust the seat  
while the vehicle is moving. This  
could result in loss of control, and  
an accident causing death, seri-  
ous injury, or property damage.  
WARNING - Driver respon-  
sibility for passengers  
Riding in a vehicle with the seat-  
back reclined could lead to serious  
or fatal injury in an accident. If a  
seat is reclined during an accident,  
the occupant’s hips may slide  
under the lap portion of the seat  
belt, applying great force to the  
unprotected abdomen. Serious or  
fatal internal injuries could result.  
The driver must advise the passen-  
ger to keep the seatback in an  
upright position whenever the vehi-  
cle is in motion.  
WARNING - Rear seatbacks  
• Do not allow anything to interfere  
with the normal position of the  
seatback. Storing items against a  
seatback or in any other way  
interfering with proper locking of  
a seatback could result in serious  
or fatal injury in a sudden stop or  
collision.  
• The rear seatback must be  
securely latched. If not, passen-  
gers and objects could be thrown  
forward resulting in serious  
injury or death in the event of a  
sudden stop or collision.  
(Continued)  
(Continued)  
3 3  
Safety features of your vehicle  
(Continued)  
WARNING  
• Luggage and other cargo should  
be laid flat in the cargo area. If  
objects are large, heavy, or must  
be piled, they must be secured.  
Under no circumstances should  
cargo be piled higher than the  
seatbacks. Failure to follow these  
warnings could result in serious  
injury or death in the event of a  
sudden stop, collision or rollover.  
After adjusting the seat, always  
check that it is securely locked into  
place by attempting to move the  
seat forward or backward without  
using the lock release lever.  
Sudden or unexpected movement  
of the driver's seat could cause you  
to lose control of the vehicle result-  
ing in an accident.  
• No passenger should ride in the  
cargo area or sit or lie on folded  
seatbacks while the vehicle is  
moving. All passengers must be  
properly seated in seats and  
restrained properly while riding.  
OTA030002L  
Front seat adjustment - manual  
WARNING  
• Use extreme caution so that  
hands or other objects are not  
caught in the seat mechanisms  
while the seat is moving.  
Forward and rearward  
To move the seat forward or rearward:  
1. Pull the seat slide adjustment lever up  
and hold it.  
• When resetting the seatback to  
the upright position, make sure it  
is securely latched by pushing it  
forward and backwards.  
• Do not put a cigarette lighter on  
the floor or seat. When you oper-  
ate the seat, gas may gush out of  
the lighter and cause fire.  
2. Slide the seat to the position you  
desire.  
3. Release the lever and make sure the  
seat is locked in place.  
• To avoid the possibility of burns,  
do not remove the carpet in the  
cargo area. Emission control  
devices beneath this floor gener-  
ate high temperatures.  
• If there are occupants in the rear  
seats, be careful while adjusting  
the font seat position.  
Adjust the seat before driving, and make  
sure the seat is locked securely by trying  
to move forward and rearward without  
using the lever. If the seat moves, it is not  
locked properly.  
• Use extreme caution when picking  
small objects trapped under the  
seats or between the seat and the  
center console. Your hands might  
be cut or injured by the sharp  
edges of the seat mechanism.  
3 4  
Safety features of your vehicle  
OTA030003L  
OTA030004L  
OPA039052  
Seatback angle  
To recline the seatback:  
Seat cushion height (for driver’s seat)  
(if equipped)  
Headrest  
The driver's and front passenger's seats  
are equipped with a headrest for the  
occupant's safety and comfort.  
To change the height of the seat cushion,  
push the lever that is located on the out-  
side of the seat cushion upwards or  
downwards.  
1. Lean forward slightly and lift up on the  
seatback recline lever.  
2. Carefully lean back on the seat and  
adjust the seatback of the seat to the  
position you desire.  
The headrest not only provides comfort  
for the driver and front passenger, but  
also helps to protect the head and neck  
in the event of a collision.  
To lower the seat cushion, push the  
lever down several times.  
3. Release the lever and make sure the  
seatback is locked in place. (The lever  
MUST return to its original position for  
the seatback to lock.)  
To raise the seat cushion, pull the lever  
up several times.  
3 5  
Safety features of your vehicle  
WARNING  
• For maximum effectiveness in  
case of an accident, the headrest  
should be adjusted so the middle  
of the headrest is at the same  
height as the center of gravity of  
an occupant's head. Generally,  
the center of gravity of most peo-  
ple's head is similar with the  
height of the top of their eyes.  
Also, adjust the headrest as close  
to your head as possible. For this  
reason, the use of a cushion that  
holds the body away from the  
seatback is not recommended.  
OTA030005L  
OYFH034205  
Adjusting the height up and down  
To raise the headrest, pull it up to the  
desired position (1). To lower the head-  
rest, push and hold the release button (2)  
on the headrest support and lower the  
headrest to the desired position (3).  
CAUTION  
If you recline the seatback towards  
the front with the headrest and seat  
cushion raised, the headrest may  
come in contact with the sunvisor  
or other parts of the vehicle.  
• Do not operate the vehicle with  
the headrests removed as severe  
injury to the occupants may  
occur in the event of an accident.  
Headrests may provide protec-  
tion against neck injuries when  
properly adjusted.  
• Do not adjust the headrest posi-  
tion of the driver's seat while the  
vehicle is in motion.  
• When there is no occupant in the  
rear seats, adjust the height of the  
headrest to the lowest position.  
The rear seat headrest can reduce  
the visibility of the rear area.  
3 6  
Safety features of your vehicle  
OTA034053  
OTA034054  
HNF2041-1  
Removal and installation  
To reinstall the headrest :  
1. Put the headrest poles (2) into the holes  
while pressing the release button (1).  
Active headrest (if equipped)  
To remove the headrest:  
The active headrest is designed to move  
forward and upward during a rear impact.  
This helps to prevent the driver's and front  
passenger’s heads from moving backward  
and thus helps prevent neck injuries.  
1. Recline the seatback (2) with the  
recline lever (1).  
2. Raise headrest as far as it can go.  
2. Recline the seatback (4) with the  
recline lever (3).  
3. Adjust the headrest to the appropriate  
height.  
3. Press the headrest release button (3)  
while pulling the headrest up (4).  
WARNING  
WARNING  
A gap between the seat and the  
headrest release button may  
appear when seating on the seat or  
when you push or pull the seat. Be  
careful not to get your finger, etc.  
caught in the gap.  
WARNING  
NEVER allow anyone to ride in a  
seat with the headrest removed.  
Always make sure the headrest  
locks into position after reinstalling  
and adjusting it properly.  
3 7  
Safety features of your vehicle  
NOTICE  
WARNING - Seat warmer  
burns  
With the seat warmer switch in the ON  
position, the heating system in the seat  
turns off or on automatically depending  
on the seat temperature.  
Passengers should use extreme  
caution when using seat warmers  
due to the possibility of excess heat-  
ing or burns.The occupants must be  
able to feel if the seat is becoming  
too warm and to turn the seat  
warmer off. The seat warmer may  
cause burns even at low tempera-  
tures, especially if used for long peri-  
ods of time. In particular, the driver  
must exercise extreme care for the  
following types of passengers:  
CAUTION  
• When cleaning the seats, do not  
use an organic solvent such as  
paint thinner, benzene, alcohol  
and gasoline. Doing so may dam-  
age the surface of the heater or  
seats.  
OTA030008  
Seat warmer (if equipped)  
• To prevent overheating the seat  
warmer, do not place anything on  
the seats that insulates against  
heat, such as blankets, cushions  
or seat covers while the seat  
warmer is in operation.  
The seat warmer is provided to warm the  
front seats during cold weather. With the  
ignition switch in the ON position, push  
either of the switches to warm the driver's  
seat or the front passenger's seat.  
1. Infants, children, elderly or hand-  
icapped persons, or hospital out-  
patients  
2. Persons with sensitive skin or  
those that burn easily  
3. Fatigued individuals  
During mild weather or under conditions  
where the operation of the seat warmer  
is not needed, keep the switches in the  
"OFF" position.  
• Do not place heavy or sharp  
objects on seats equipped with  
seat warmers. Damage to the seat  
warming components could occur.  
4. Intoxicated individuals  
5. Individuals taking medication  
that can cause drowsiness or  
sleepiness (sleeping pills, cold  
tablets, etc.)  
• Each time you press the button, the  
temperature setting of the seat will  
change as follows :  
• Do not change the seat cover. It  
may damage the seat warmer or  
airventilation system.  
OFF  
HIGH(  
)
LOW(  
)
• The seat warmer defaults to the OFF  
position whenever the ignition switch is  
turned on.  
3 8  
Safety features of your vehicle  
OTA032052L  
OTA030009  
OTA030010  
Seatback pocket (if equipped)  
Passenger seat under tray  
(if equipped)  
Rear seat entry  
(for 3door vehicle only)  
The seatback pocket is provided on the  
back of the front passenger’s and driver’s  
seatbacks.  
To open the tray, pull up the lever and pull  
out the tray forward.  
The front passenger's seatback should  
be tilted to enter the rear seat.  
By pulling up the walk-in seat lever (2) on  
the upper part of the front passenger’s  
seatback, the seatback will tilt forward.  
Then push the seat forward to allow the  
occupants to enter.  
WARNING - Seatback  
pockets  
Do not put heavy or sharp objects  
in the seatback pockets. In an acci-  
dent they could come loose from  
the pocket and injure vehicle occu-  
pants.  
WARNING - Flammable  
materials  
Do not store cigarette lighters,  
propane cylinders, or other flamma-  
ble/explosive materials in the tray.  
These items may catch fire and/or  
explode if the vehicle is exposed to  
hot temperatures for extended peri-  
ods.  
By pulling up the seatback, the seatback  
will recline and return to the original position.  
WARNING  
Never attempt to adjust the seat  
while the vehicle is moving or when  
the passenger's seat is occupied as  
the seat may suddenly move and  
injure the passenger.  
3 9  
Safety features of your vehicle  
WARNING  
WARNING  
• Since stored items may move  
while driving, be sure to position  
them in the tray so that they do  
not make noise or cause a poten-  
tial safety hazard when the vehi-  
cle is moving.  
• For maximum effectiveness in  
case of an accident, the headrest  
should be adjusted so the middle  
of the headrest is at the same  
height as the center of gravity of  
an occupant's head. Generally,  
the center of gravity of most peo-  
ple's head is similar with the  
height of the top of their eyes.  
Also adjust the headrest as close  
to your head as possible. For this  
reason, the use of a cushion that  
holds the body away from the  
seatback is not recommended.  
• Always keep the tray closed while  
driving. Do not place many items  
in the tray that the tray can not  
close securely.  
OPA039053  
Rear seat adjustment  
Headrest (if equipped)  
CAUTION  
To avoid possible theft, do not leave  
valuables in the tray.  
The rear seat is equipped with headrests  
for the occupant's safety and comfort.  
• Do not operate the vehicle with  
the headrests removed. Severe  
injury to an occupant may occur  
in the event of an accident.  
Headrests may provide protec-  
tion against severe neck injuries  
when properly adjusted.  
The headrest not only provides comfort  
for passengers, but also helps to protect  
the head and neck in the event of a colli-  
sion.  
The tray can be used to store small  
items required by the driver or pas-  
sengers.  
3 10  
Safety features of your vehicle  
Folding the rear seat (if equipped)  
The rear seatbacks (or cushions) may be  
folded to facilitate carrying long items or  
to increase the luggage capacity of the  
vehicle.  
WARNING  
The purpose of the fold-down rear  
seatbacks (or cushions) is to allow  
you carry longer objects that could  
not be accommodated in the cargo  
area.  
OTA030011  
OTA030012  
Never allow passengers sit on top  
of the folded down seatback while  
the car is moving as this is not a  
proper seating position and no seat  
belts are available for use. This  
could result in serious injury or  
death in case of an accident or sud-  
den stop. Objects carried on the  
folded down seatback should not  
extend higher than the top of the  
front seatbacks. Doing this could  
allow cargo to slide forward and  
cause injury or damage during sud-  
den stops.  
Adjusting the height up and down  
(if equipped)  
Removal and installation (if equipped)  
To remove the headrest, raise it as far as  
it can go then press the release button  
(1) while pulling upward (2).  
To raise the headrest, pull it up to the  
desired position (1). To lower the head-  
rest, push and hold the release button (2)  
on the headrest support and lower the  
headrest to the desired position (3).  
To reinstall the headrest, put the head-  
rest poles (3) into the holes while press-  
ing the release button (1). Then adjust it  
to the appropriate height.  
WARNING  
Make sure the headrest locks in  
position after adjusting it to proper-  
ly protect the occupants.  
3 11  
Safety features of your vehicle  
To fold the rear seat cushion and seat back:  
CAUTION  
The rear seatbacks may be folded for-  
ward to provide additional cargo space  
and to provide access to the cargo area.  
• When folding or unfolding the rear  
seat, make sure to move the front  
seat fully forward. If there are not  
enough space to fold the rear  
seat, never fold it by force. It will  
cause damage to the headrest or  
the related parts of the seat.  
To raise the seatback, lift and push it  
firmly until it clicks into place.  
• When you return the seatback to its  
upright position, reposition the rear  
safety belts so that they can be used  
by rear seat passengers.  
• Before using the seat belt, be  
sure to remove it from the holder.  
If you pull out the seat belt while  
it's in the holder, it may damage  
the seat belt or holder.  
OTA030013  
WARNING  
Do not fold the rear seat, if the dri-  
ver's position is not properly set  
according to the driver's physical  
figure after folding the rear seat. A  
sudden stop or collision may cause  
injury.  
1. Set the front seatback to the upright  
position and slide the front seat for-  
ward.  
• Use the holder only when there is  
no passengers in the rear seat or  
when you need to fold the rear seat.  
2. Insert the rear seat belt metal tab into  
the holder to prevent the seat belt form  
being damaged.  
3 12  
Safety features of your vehicle  
Type A  
Type A  
Type A  
OSA037009  
OSA037010  
OSA037011  
Type B  
Type B  
Type B  
OSA037036  
OSA037037  
OSA037038  
3. Lift up the front part of the seat cush-  
ion (1).  
4. Lift up the rear part of the seat cushion  
(2).  
5. Move the seat cushion firmly (3).  
3 13  
Safety features of your vehicle  
Type A  
Type A  
To unfold the rear seat:  
1. Lift and push the seatback backward  
firmly until it clicks into place.  
2. Move and push the seat cushion  
downward firmly to the proper position.  
3. Replace the rear seat belt to the prop-  
er position.  
WARNING  
When you return the rear seatback  
to its upright position after being  
folded down:  
OSA037012  
OSA037014  
Type B  
Be careful not to damage the seat  
belt webbing or buckle. Do not allow  
the seat belt webbing or buckle to  
get caught or pinched in the rear  
seat. Ensure that the seatback is  
completely locked into its upright  
position by pushing on the top of the  
seatback. Otherwise, in an accident  
or sudden stop, the seat could fold  
down and allow cargo enter the pas-  
senger compartment, which could  
result in serious injury or death.  
OSA037019  
OSA037039  
6. Lower the headrest as low as possible  
(4).  
7. Pull up the lock release lever (4).  
8. Fold the seatback forward and down  
firmly (5), (6).  
WARNING  
CAUTION - Damaging rear  
seat belt buckles  
When you fold the rear seatback,  
insert the buckle between the rear  
seatback and cushion. Doing so  
can prevent the buckle from being  
damaged by the rear seatback.  
After folding the rear seat, unless  
the driver’s position is properly set  
according to the driver’s physical  
figure, do not fold the rear seat. It  
may increase body injuries in a  
sudden stop or collision.  
3 14  

Related Topics

Popular Owner Manuals