Get Driving tips -> Homelink? wireless control system Guide for Kia Sportage SUV Second Generation (2004-2010)

Driving tips

HOMELINK® WIRELESS CONTROL SYSTEM (IF EQUIPPED)

Glare detection sensor

(Continued)

CAUTION

Indicator light

• Retain the original transmitter

• When

programming

the

for future programming proce-

HomeLink® Wireless Control

dures (i.e., new vehicle pur-

System, you may be operating

chase). It is also suggested

a garage door or gate opera-

that upon the sale of the vehi-

tor. Make sure that people and

cle,

the

programmed

objects are out of the way of

HomeLink buttons be erased

the moving door or gate to

for security purposes (follow

prevent potential harm or

step 1 in the “Programming”

damage.

Homelink buttons

MMSA5007

portion of this text).

• Do not use HomeLink with any

Your new mirror comes with an inte-

garage door opener that lacks

grated

HomeLink

Universal

the safety stop and reverse

Transceiver, which allows you to pro-

feature as required by federal

gram the mirror to activate your

safety

standards.

(This

garage door(s), estate gate, home

includes any garage door

lighting, etc. The mirror actually

opener model manufactured

learns the codes from your various

before April 1, 1982.) A garage

existing transmitters.

door opener which cannot

detect an object, signaling the

door to stop and reverse, does

not meet current federal safe-

ty standards. Using a garage

door opener without these

features increases risk of seri-

ous injury or death. For more

information, call 1-800-355-

3515 or on the internet at

(Continued)

5 45

Driving tips

Programming

✽ NOTICE

Flashing

For non rolling code garage door

Your vehicle may require the ignition

openers, follow steps 2 - 3.

switch to be turned to the ACC posi-

For rolling code garage door open-

tion for programming and/or opera-

ers, follow steps 2 - 6.

tion of HomeLink. It is also recom-

For Canadian Programming, please

mended that a new battery be

follow the Canadian Programming

replaced in the hand-held transmitter

section.

of the device being programmed to

For help with determining whether

HomeLink for quicker training and

your garage is non-rolling code or

accurate transmission of the radio-

MMSA5005

rolling code, please refer to the

frequency.

1. When programming the buttons

garage door openers owner’s manu-

Follow these steps to train your

for the first time, press and hold

al or contact HomeLink customer

HomeLink mirror:

the left and center buttons (

service at 1-800-355-3515.

) simultaniously until the

indicator light begins to flash after

approximately 20 seconds. (This

procedure erases the factory-set

default codes. Do Not perform this

step to program additional hand-

held transmitters.)

5 46

Driving tips

3. The HomeLink indicator light will

Rolling code programming

Flashing

flash, first slowly and then rapidly.

To train a garage door opener (or

When the indicator light flashes

other rolling code equipped devices)

rapidly, both buttons may be

with the rolling code feature, follow

released. (The rapid flashing light

these instructions after completing

indicates successful programming

the “Programming” portion of this

of the new frequency signal.)

text. (A second person may make the

3in

following training procedures quicker

✽ NOTICE

& easier.)

4. Locate the “learn” or “smart” but-

Some gate operators and garage

Transmitter

MMSA5006

ton on the device’s motor head

door openers may require you to

2. Press and hold the button on the

unit. Exact location and color of

replace step #3 with the “cycling”

HomeLink system you wish to

the button may vary by product

procedure noted in the “Canadian

train and the button on the trans-

brand. If there is difficulty locating

Programming” section of this docu-

mitter while the transmitter is

the “learn” or “smart” button, refer-

ment.

approximately 1 to 3 inches away

ence the device’s owner’s manual

from the mirror. Do not release the

or contact HomeLink at 1-800-

buttons until step 3 has been com-

355-3515 or on the internet at

pleted.

5. Press and release the “learn” or

“smart” button on the device’s

motor head unit. You have 30 sec-

onds to complete step number 6.

5 47

Driving tips

6. Return to the vehicle and firmly

Operating HomeLink

Flashing

press and release the pro-

To operate, simply press the pro-

grammed HomeLink button up to

grammed

HomeLink

button.

three times. The rolling code

Activation will now occur for the

equipped device should now rec-

trained product (garage door, securi-

ognize the HomeLink signal and

ty system, entry door lock, estate

activate when the HomeLink but-

gate, or home or office lighting). For

ton is pressed. The remaining two

convenience, the hand-held trans-

buttons may now be programmed

mitter of the device may also be used

if this has not previously been

at any time. The HomeLink Wireless

done. Refer to the “Programming”

MMSA5005

Controls System (once programmed)

portion of this text.

Erasing programmed

or the original hand-held transmitter

HomeLink buttons

may be used to activate the device

(e.g. garage door, entry door lock,

To erase the three programmed but-

etc.). In the event that there are still

tons (individual buttons cannot be

programming difficulties, contact

erased):

HomeLink at 1-800-355-3515 or on

• Press and hold the left and center

the internet at

buttons simultaniously, until the

indicator light begins to flash

(approximately 20 seconds).

Release both buttons. Do not hold

for longer than 30 seconds.

HomeLink is now in the train (or

learning) mode and can be pro-

grammed at any time.

5 48

Driving tips

Reprogramming a single

Gate operator programming &

Accessories

HomeLink button

canadian programming

If you would like additional informa-

To program a device to HomeLink

tion on the HomeLink Wireless

During programming, your hand-held

using a HomeLink button previously

Control System, HomeLink compati-

transmitter may automatically stop

trained, follow these steps:

ble products, or to purchase other

transmitting. Continue to press and

accessories such as the HomeLink®

hold the HomeLink button (note

1. Press and hold the desired

Lighting Package, please contact

steps 2 through 4 in the

HomeLink button. Do NOT release

HomeLink at 1-800-355-3515 or on

“Programming” portion of this text)

until step 4 has been completed.

the internet at

while you press and re-press

2. When the indicator light begins to

(“cycle”) your handheld transmitter

flash slowly (after 20 seconds),

every two seconds until the frequen-

position the hand-held transmitter

cy signal has been learned. The indi-

1 to 3 inches away from the

cator light will flash slowly and then

HomeLink surface.

rapidly after several seconds upon

3. Press and hold the hand-held

successful training.

transmitter button (or press and

“cycle” - as described in

✽ NOTICE

“Canadian Programming” above).

If programming a garage door open-

4. The HomeLink indicator light will

er or gate, it is advised to unplug the

flash, first slowly and then rapidly.

device during the “cycling” process

When the indicator light begins to

to prevent possible motor burn-up.

flash rapidly, release both buttons.

The previous device has now been

erased and the new device can be

activated by pushing the HomeLink

button that has just been pro-

grammed. This procedure will not

affect any other programmed

HomeLink buttons.

5 49

Driving tips

This device complies with

Industry Canada Standard RSS-

210. Operation is subject to the fol-

lowing two conditions:

1. This device may not cause inter-

ference, and

2. This device must accept any inter-

ference, including interference that

may cause undesired operation of

the device.

WARNING

Changes or modifications not

expressly approved by the party

responsible for compliance

could void the user’s authority

to operate the equipment.

IC: 4112104541A Gentex

MODEL/FCC ID: NZLSTDHL3

5 50

Driving tips -> Homelink? wireless control system for Your Kia Sportage SUV Second Generation (2004-2010)

Related Topics

Popular Owner Manuals

Latest Owner Manuals