2011-2016 Kia Sportage SUV Features of your vehicle -> Keys User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Features of your vehicle -> Keys for Your Kia Sportage SUV Third Generation (2011-2016)

Features of your vehicle  
KEYS  
D010100AUN  
Type A  
Key operations  
• Used to start the engine.  
Record your key number  
The key code number is  
• Used to lock and unlock the doors.  
stamped on the tag  
attached to the key set.  
Should you lose your  
Type B  
To unfold the key, press the release but-  
ton then the key will unfold automatically.  
To fold the key, fold the key manually  
while pressing the release button.  
keys, this number will  
enable an authorized Kia dealer to dupli-  
cate the keys easily. Remove the tag and  
store it in a safe place. Also, record the  
code number and keep it in a safe place  
(not in the vehicle).  
OUN026060  
OAM041096L  
OSL040002N  
Type B  
CAUTION  
Do not fold the key without press-  
ing the release button. This may  
damage the key.  
Type C  
To remove the mechanical key, press and  
hold the release button (1) and remove  
the mechanical key (2).  
To reinstall the mechanical key, put the  
key into the hole and push it until a click  
sound is heard.  
Type C  
D010200AAM  
4 2  
Downloaded from manuals search engine  
Features of your vehicle  
D010300AAM  
To activate the immobilizer system:  
Immobilizer system (if equipped)  
WARNING - Ignition key  
Turn the ignition key to the OFF position.  
The immobilizer system activates auto-  
matically. Without a valid ignition key for  
your vehicle, the engine will not start.  
Leaving children unattended in a  
vehicle with the ignition key is dan-  
gerous even if the key is not in the  
ignition switch. Children copy  
adults and they could place the key  
in the ignition switch. The ignition  
key would enable children to oper-  
ate power windows or other con-  
trols, or even make the vehicle  
move, which could result in serious  
bodily injury or even death. Never  
leave the keys in your vehicle with  
unsupervised children.  
Your vehicle may be equipped with an  
electronic engine immobilizer system to  
reduce the risk of unauthorized vehicle  
use.  
Your immobilizer system is comprised of  
a small transponder in the ignition key  
and electronic devices inside the vehicle.  
With the immobilizer system, whenever  
you insert your ignition key into the igni-  
tion switch and turn it to ON, it checks  
and determines and verifies that the igni-  
tion key is valid.  
If the key is determined to be valid, the  
engine will start.  
To deactivate the immobilizer sys-  
tem:  
Insert the ignition key into the key cylin-  
der and turn it to the ON position.  
WARNING  
In order to prevent theft of your  
vehicle, do not leave spare keys or  
your key number anywhere in the  
vehicle. The ignition key and key  
number are unique to your vehicle,  
and therefore, should be kept confi-  
dential.  
If the key is determined to be invalid, the  
engine will not start.  
WARNING  
Use only Kia original parts for the  
ignition key in your vehicle. If an  
aftermarket key is used, the ignition  
switch may not return to ON after  
START. If this happens, the starter  
will continue to operate causing  
damage to the starter motor and  
possible fire due to excessive cur-  
rent in the wiring.  
4 3  
Downloaded from manuals search engine  
Features of your vehicle  
This device complies with Industry  
Canada Standard RSS-210.  
Operation is subject to the following two  
conditions:  
1. This device may not cause harmful  
interference, and  
2. This device must accept any interfer-  
ence received, including interference  
that may cause undesired operation.  
NOTICE  
NOTICE  
When starting the engine, do not use the If you need additional keys or lose your  
key with other immobilizer keys around. keys, consult an authorized Kia dealer.  
Otherwise the engine may not start or  
may stop soon after it starts. Keep each  
CAUTION  
key separately in order to avoid a start-  
The transponder in your ignition  
key is an important part of the  
immobilizer system. It is designed  
to give years of trouble-free service,  
however you should avoid expo-  
sure to moisture, static electricity  
and rough handling. Immobilizer  
system malfunction could occur.  
ing malfunction.  
CAUTION  
Do not put metal accessories near  
the ignition switch.  
Metal accessories may interrupt the  
transponder signal and may pre-  
vent the engine from being started.  
WARNING  
Changes or modifications not  
expressly approved by the party  
responsible for compliance could  
void the user's authority to operate  
the equipment.  
CAUTION  
Do not change, alter or adjust the  
immobilizer system because it  
could cause the immobilizer sys-  
tem to malfunction and should only  
be serviced by an authorized Kia  
dealer.  
Malfunctions caused by improper  
alterations, adjustments or modifi-  
cations to the immobilizer system  
are not covered by your vehicle  
manufacturer warranty.  
4 4  
Downloaded from manuals search engine  
Features of your vehicle  
D010301AUN-EC  
4. If all of the digits have been input suc-  
cessfully, you have to start the engine  
within 30 seconds. If you attempt to  
start the engine after 30 seconds, the  
engine will not start and you will have  
to input your password again.  
After performing the limp home proce-  
dure, you have to see an authorized Kia  
dealer immediately to inspect and repair  
your ignition key or immobilizer system.  
Limp home (override) procedure  
When you turn the ignition switch to the  
ON position, if the immobilizer indicator  
(
) goes off after blinking 5 times,  
your transponder equipped in the ignition  
key is out of order. You cannot start the  
engine without the limp home procedure.  
To start the engine, you have to input  
your password by using the ignition  
switch. Your password is only available  
from an authorized Kia dealership.  
Contact an authorized dealer for more  
information.  
The following procedure is how to input  
your password of “2345” as an example.  
1. Turn the ignition switch to the ON posi-  
tion. The immobilizer indicator (  
)
will blink 5 times and go off indicating  
the beginning of the limp home proce-  
dure.  
2. Turn the ignition switch to the ACC  
position.  
3. To enter the first digit (in this example  
“2”), turn the ignition switch to the ON  
and ACC position twice. Perform the  
same procedure for the next digits  
between 3 seconds and 10 seconds  
(for example, for “3”, turn the ignition  
ON and ACC 3 times).  
4 5  
Downloaded from manuals search engine  

Related Topics

Popular Owner Manuals