Get Features of your vehicle -> Mirrors Guide for Kia Sportage SUV Third Generation (2011-2016)

Features of your vehicle

MIRRORS

D140100AHM

D140102AHM-EE-C1

Electrochromic Mirror (ECM)

(if equipped)

Inside rearview mirror

Adjust the rearview mirror so that the

center view through the rear window is

seen. Make this adjustment before you

start driving.

The electric rearview mirror automatical-

ly controls the glare from the headlights

of the vehicles behind you in nighttime or

low light driving conditions. The sensor

mounted in the mirror senses the light

level around the vehicle, and automati-

cally controls the headlight glare from the

vehicles behind you.

Night

WARNING - Rear visibility

Do not place objects in the rear

seat or cargo area which would

interfere with your vision through

the rear window.

Day

When the engine is running, the glare is

automatically controlled by the sensor

mounted in the rearview mirror.

OAM049023

D140101AHM

Whenever the shift lever is shifted into

reverse (R), the mirror will automatically

go to the brightest setting in order to

improve the drivers view behind the vehi-

cle.

Day/night rearview mirror

(if equipped)

Make this adjustment before you start

driving and while the day/night lever is in

the day position.

Pull the day/night lever toward you to

reduce the glare from the headlights of

the vehicles behind you during night driv-

ing.

Remember that you lose some rearview

clarity in the night position.

WARNING

Do not adjust the rearview mirror

while the vehicle is moving. This

could result in loss of control, and

an accident which could cause

death, serious injury or property

damage.

CAUTION

When cleaning the mirror, use a

paper towel or similar material

dampened with glass cleaner. Do

not spray glass cleaner directly on

the mirror. It may cause the liquid

cleaner to enter the mirror housing.

WARNING

Do not modify the inside mirror and

don’t install a wide mirror. It could

result in injury, during an accident

or deployment of the air bag.

4 37

Downloaded from manuals search engine

Features of your vehicle

• Press the ON/OFF button (1) to turn

the automatic dimming function off.

The mirror indicator light will turn off.

■ Type A

Press the ON/OFF button (1) to turn

the automatic dimming function on.

The mirror indicator light will illuminate.

CAUTION

Indicator

Sensor

If your vehicle has window tint or

other types of metallic coating on

the rear window the electric

rearview mirror may not work prop-

erly.

OXM049035

■ Type B

OHD046025N

Electric chromic mirror with homelink

system (if equipped)

Rearview display

To operate the electric rearview mirror

Press the I button (1) to turn the auto-

matic- dimming function on. The mirror

indicator light will illuminate.

Press the O button (2) to turn the auto-

matic- dimming function off. The mirror

indicator light will turn off.

Indicator

Sensor

OSL040240L

1

To operate the electric rearview mirror:

• The mirror defaults to the ON position

whenever the ignition switch is turned

on.

4 38

Downloaded from manuals search engine

Features of your vehicle

Retain the original transmitter for future

programming procedures (i.e., new vehi-

cle purchase). It is also suggested that

upon the sale of the vehicle, the pro-

grammed HomeLink buttons be erased

for security purposes (follow step 1 in the

“Programming” portion of this text).

Glare detection sensor

Indicator light

WARNING

• When

programming

the

HomeLink® Wireless Control

System, you may be operating a

garage door or gate operator.

Make sure that people and objects

are out of the way of the moving

door or gate to prevent potential

harm or damage.

• Do not use HomeLink with any

garage door opener that lacks the

safety stop and reverse feature

as required by federal safety

standards. (This includes any

garage door opener model manu-

factured before April 1, 1982.) A

garage door opener which cannot

detect an object, signaling the

door to stop and reverse, does

not meet current federal safety

standards. Using a garage door

opener without these features

increases risk of serious injury or

death. For more information, call

1-800-355-3515 or on the internet

at .

Programming

Your vehicle may require the ignition

switch to be turned to the ACC position

for programming and/or operation of

HomeLink. It is also recommended that a

new battery be replaced in the hand-held

transmitter of the device being pro-

grammed to HomeLink for quicker train-

ing and accurate transmission of the

radio-frequency.

Homelink buttons

OHD046305N

HomeLink® Wireless Control System

Your new mirror comes with an integrat-

ed HomeLink Universal Transceiver,

which allows you to program the mirror to

activate your garage door(s), estate gate,

home lighting, etc. The mirror actually

learns the codes from your various exist-

ing transmitters.

Follow these steps to train your

HomeLink mirror:

4 39

Downloaded from manuals search engine

Features of your vehicle

Flashing

✽

NOTICE

Flashing

For non rolling code garage door open-

ers, follow steps 2 - 3.

For rolling code garage door openers,

follow steps 2 - 6.

For Canadian Programming, please fol-

low the Canadian Programming section.

For help with determining whether your

garage is non-rolling code or rolling

code, please refer to the garage door

openers owner’s manual or contact

HomeLink customer service at 1-800-

355-3515.

Transmitter

OHD046306N

OHD046307N

1. When programming the buttons for the

first time, press and hold the left and

2. Press and hold the button on the

HomeLink system you wish to train

and the button on the transmitter while

the transmitter is approximately 2-8 cm

(1 to 3 inches) away from the mirror.

Do not release the buttons until step 3

has been completed.

3. The HomeLink indicator light will flash,

first slowly and then rapidly. When the

indicator light flashes rapidly, both but-

tons may be released. (The rapid flash-

ing light indicates successful program-

ming of the new frequency signal.)

center buttons (

,

)

simultane-

ously until the indicator light begins to

flash after approximately 20 seconds.

(This procedure erases the factory-set

default codes. Do not perform this step

to program additional hand-held trans-

mitters.)

✽

NOTICE

Some gate operators and garage door

openers may require you to replace step

#3 with the “cycling” procedure noted in

the “Canadian Programming” section

of this document.

4 40

Downloaded from manuals search engine

Features of your vehicle

Rolling code programming

Operating HomeLink

Flashing

To train a garage door opener (or other

rolling code equipped devices) with the

rolling code feature, follow these instruc-

tions after completing the “Programming”

portion of this text. (A second person

may make the following training proce-

dures quicker & easier.)

4. Locate the “learn” or “smart” button on

the device’s motor head unit. Exact

location and color of the button may

vary by product brand. If there is diffi-

culty locating the “learn” or “smart” but-

ton, reference the device’s owner’s

manual or contact HomeLink at 1-800-

355-3515 or on the internet at

.

To operate, simply press the pro-

grammed HomeLink button. Activation

will now occur for the trained product

(garage door, security system, entry door

lock, estate gate, or home or office light-

ing). For convenience, the hand-held

transmitter of the device may also be

used at any time. The HomeLink

Wireless Controls System (once pro-

grammed) or the original hand-held

transmitter may be used to activate the

device (e.g. garage door, entry door lock,

etc.). In the event that there are still pro-

gramming difficulties, contact HomeLink

at 1-800-355-3515 or on the internet at

.

OHD046306N

Erasing programmed HomeLink but-

tons

To erase the three programmed buttons

(individual buttons cannot be erased):

5. Press and release the “learn” or

“smart” button on the device’s motor

head unit. You have 30 seconds to

complete step number 6.

• Press and hold the left and center

buttons simultaneously, until the indi-

cator light begins to flash (approxi-

mately 20 seconds). Release both but-

tons. Do not hold for longer than 30

seconds.

6. Return to the vehicle and firmly press

and

release

the

programmed

HomeLink button up to three times.

The rolling code equipped device

should now recognize the HomeLink

signal and activate when the

HomeLink button is pressed. The

remaining two buttons may now be

programmed if this has not previously

HomeLink is now in the train (or learning)

mode and can be programmed at any

time.

been

done.

Refer

to

the

“Programming” portion of this text.

4 41

Downloaded from manuals search engine

Features of your vehicle

Reprogramming a single HomeLink

button

To program a device to HomeLink using

a HomeLink button previously trained,

follow these steps:

1. Press and hold the desired HomeLink

button. Do NOT release until step 4

has been completed.

2. When the indicator light begins to flash

slowly (after 20 seconds), position the

hand-held transmitter 2-8 cm (1 to 3

inches) away from the HomeLink sur-

face.

Gate operator programming & canadi-

an programming

Accessories

If you would like additional information on

the HomeLink Wireless Control System,

HomeLink compatible products, or to

purchase other accessories such as the

HomeLink® Lighting Package, please

contact HomeLink at 1-800-355-3515 or

on the internet at .

During programming, your hand-held

transmitter may automatically stop trans-

mitting. Continue to press and hold the

HomeLink button (note steps 2 through 4

in the “Programming” portion of this text)

while you press and re-press (“cycle”)

your handheld transmitter every two sec-

onds until the frequency signal has been

learned. The indicator light will flash

slowly and then rapidly after several sec-

onds upon successful training.

This device complies with Industry

Canada Standard RSS-210.

Operation is subject to the following two

conditions:

3. Press and hold the hand-held trans-

mitter button (or press and “cycle” - as

described in “Canadian Programming”

above).

4. The HomeLink indicator light will flash,

first slowly and then rapidly. When the

indicator light begins to flash rapidly,

release both buttons.

1. This device may not cause harmful

interference, and

2. This device must accept any interfer-

ence received, including interference

that may cause undesired operation.

CAUTION

If programming a garage door

opener or gate, it is advised to

unplug the device during the

“cycling” process to prevent possi-

ble motor burn-up.

WARNING

The HomeLink transmitter has

been tested and complies with FCC

and industry Canada rules.

Changes or modifications not

expressly approved by the party

responsible for compliance could

void the user’s authority to operate

the equipment.

The previous device has now been

erased and the new device can be acti-

vated by pushing the HomeLink button

that has just been programmed.This pro-

cedure will not affect any other pro-

grammed HomeLink buttons.

IC: 4112104541A Gentex

MODEL/FCC ID: NZLSTDHL3

4 42

Downloaded from manuals search engine

Features of your vehicle

D140200AHM-EU

CAUTION

Outside rearview mirror

Do not scrape ice off the mirror

face; this may damage the surface

of the glass. If ice should restrict

the movement of the mirror, do not

force the mirror for adjustment. To

remove ice, use a deicer spray, or a

sponge or soft cloth with very warm

water.

Be sure to adjust the mirror angles

before driving.

Your vehicle is equipped with both left-

hand and right-hand outside rearview

mirrors. The mirrors can be adjusted

remotely with the remote switch. The mir-

ror heads can be folded back to prevent

damage during an automatic car wash or

when passing through a narrow street.

OSL040027

CAUTION

D140201AHM-EE

WARNING - Rearview mir-

rors

• The right outside rearview mirror

is convex. Objects seen in the

mirror are closer than they

appear.

• Use your interior rearview mirror

or direct observation to deter-

mine the actual distance of fol-

lowing vehicles when changing

lanes.

If the mirror is jammed with ice, do

not adjust the mirror by force. Use

an approved spray de-icer (not radi-

ator antifreeze) to release the

frozen mechanism or move the

vehicle to a warm place and allow

the ice to melt.

Remote control

Electric type

The electric remote control mirror switch

allows you to adjust the position of the

left and right outside rearview mirrors. To

adjust the position of either mirror the

ignition switch should be in the ACC posi-

tion. Move the switch (1) to R or L to

select the right side mirror or the left side

mirror, then press a corresponding point

on the mirror adjustment control to posi-

tion the selected mirror up, down, left or

right.

WARNING

Do not adjust or fold the outside

rearview mirrors while the vehicle

is moving. This could result in loss

of control, and an accident which

could cause death, serious injury

or property damage.

After the adjustment, put the switch into

the neutral (center) position to prevent

inadvertent adjustment.

4 43

Downloaded from manuals search engine

Features of your vehicle

CAUTION

• The mirrors stop moving when

they reach the maximum adjust-

ing angles, but the motor contin-

ues to operate while the switch is

pressed. Do not press the switch

longer than necessary, the motor

may be damaged.

• Do not attempt to adjust the out-

side rearview mirror by hand.

Doing so may damage the parts.

OSL040028

D140202AHM-EU

Folding the outside rearview mirror

To fold the outside rearview mirror, grasp

the housing of the mirror and then fold it

toward the rear of the vehicle.

4 44

Downloaded from manuals search engine

Features of your vehicle -> Mirrors for Your Kia Sportage SUV Third Generation (2011-2016)

Related Topics

Popular Owner Manuals

Latest Owner Manuals