2019-2026 Lexus UX SUV Adjusting the seats User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Adjusting the seats for Your Lexus UX SUV First Generation (2019-2026)

143
3-3. Adjusting the seats
3
Before driving
3-3.Adjusting the seats
Seat position adjustment switch
Seat cushion (front) angle adjust-
ment switch
Seatback angle adjustment switch
Vertical height adjustment switch
Lumbar support adjustment switch
(for driver’s side)
■ When adjusting the seat
● Make sure that any surrounding passen-
gers or objects are not contact the seat.
● Take care when adjusting the seat so that
the head restraint does not touch the ceil-
ing.
■ Power easy access system (if equipped)
The driver’s seat and steering wheel move
in accordance with power switch mode and
the driver’s seat belt condition. (P.159)
■ Jam protection function (vehicles with
driving position memory)
While the driving position is recalled or the
power easy access system is operating, if an
object is stuck behind the front seat, the
front seat will stop and then slightly move
forward.
When the jam protection function operates,
the seat stops at a position other than the
set seat position. Check the seat position.
Front seats
The seats can be adjusted (longitu-
dinally, vertically, etc.). Adjust the
seat to ensure the correct driving
posture.
Adjustment procedure
A
B
C
D
E
WARNING
■ When adjusting the seat position
● Take care when adjusting the seat
position to ensure that other passen-
gers are not injured by the moving
seat.
● Do not put your hands under the seat
or near the moving parts to avoid
injury.
Fingers or hands may become
jammed in the seat mechanism.
● Make sure to leave enough space
around the feet so they do not get
stuck.
■ Seat adjustment
To reduce the risk of sliding under the lap
belt during a collision, do not recline the
seat more than necessary.
If the seat is too reclined, the lap belt may
slide past the hips and apply restraint
forces directly to the abdomen, or your
neck may contact the shoulder belt,
increasing the risk of death or serious
injury in the event of an accident.
Adjustments should not be made while
driving as the seat may unexpectedly
move and cause the driver to lose con-
trol of the vehicle.
144
3-3. Adjusting the seats
■ Before folding down the rear seat-
backs
1
Park the vehicle in a safe place.
Apply the parking brake firmly and shift the
shift position to P. (P.192)
2 Adjust the position of the front seat
and the angle of the seatback.
(P.143)
Depending on the position of the front
seat, if the seatback is folded backward, it
may interfere with the operation of the rear
seat.
3 Lift up and push down the head
restraints of the rear outboard
seats, and lower the head restraint
of the rear center seat. (P.145)
4
Stow the armrest of the rear seat if
it is pulled out. (P.338)
This step is not necessary when operating
the left side seat only.
■ Folding down rear seatbacks
Pull the seatback lock release lever
and fold the seatback down.
■ Returning the rear seatbacks
To avoid trapping the seat belt
between the seat and the inside of the
vehicle, pass the seat belt inside the
seat belt guide and then return the
seatback securely to the locked posi-
tion.
Rear seats
The seatbacks of the rear seats can
be folded down.
Folding down the rear seatbacks
WARNING
■ When folding the rear seatbacks
down
Observe the following precautions.
Failure to do so may result in death or
serious injury.
● Do not attempt to fold the seatbacks
down while driving.
● Stop the vehicle on level ground, set
the parking brake and shift the shift
position to P.
● Do not allow anyone to sit on a folded
seatback or in the luggage compart-
ment while driving.
● Do not allow children to enter the lug-
gage compartment.
● Do not operate the rear seat if it is
occupied.
● Be careful not to get feet or hands
caught in the moving parts or joints of
the seats during operation.
● Do not allow children to operate the
seat.
A
145
3-3. Adjusting the seats
3
Before driving
■ Front seats
1
Up
Pull the head restraints up.
2 Down
Push the head restraint down while press-
ing the lock release button .
WARNING
■ After returning the rear seatback to
the upright position
Observe the following precautions.
Failure to do so may result in death or
serious injury.
● Make sure that the seatback is
securely locked in position by lightly
pushing it back and forth. If the seat-
back is not securely locked, the red
marking will be visible on the seatback
lock release lever. Make sure that the
red marking is not visible.
● Check that the seat belts are not
twisted or caught in the seatback.
Head restraints
Head restraints are provided for all
seats.
WARNING
■ Head restraint precautions
Observe the following precautions
regarding the head restraints.
Failure to do so may result in death or
serious injury.
● Use the head restraints designed for
each respective seat.
● Adjust the head restraints to the cor-
rect position at all times.
● After adjusting the head restraints,
push down on them and make sure
they are locked in position.
● Do not drive with the head restraints
removed.
Vertical adjustment
A
146
3-3. Adjusting the seats
■ Center rear seat
1 Up
Pull the head restraints up.
2 Down
Push the head restraint down while press-
ing the lock release button .
■ Outboard rear seats
1 To fold
Pull up the head restraint while pressing
the lock release button .
2 To use
Lift up and push down the head restraint to
the lowest lock position.
■ Adjusting the height of the head
restraints (front seats)
Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.
■ Adjusting the center rear seat head
restraint
Always raise the head restraint one level
from the stowed position when using.
The position of the head restraint for
the front seat can be adjusted forward
in 4 stages.
If the head restraint is pulled forward from
the foremost position, it will return to the
rearmost position.
Front and center rear seats
Pull the head restraint up while press-
ing the lock release button .
If the head restraint touches the ceiling,
making the removal difficult, change
the seat height or angle. (P.143)
A
A
Horizontal adjustment (if
equipped)
Removing the head restraints
A
147
3-3. Adjusting the seats
3
Before driving
Outboard rear seats
Pull the head restraint up while press-
ing the lock release buttons .
If the head restraint touches the ceiling,
making the removal difficult, change
the seat angle. (P.144)
Front and center rear seats
Align the head restraint with the instal-
lation holes and push it down to the
lock position.
Press and hold the lock release button
when lowering the head restraint.
Outboard rear seats
Align the head restraint with the instal-
lation holes and push it down to the
lowest lock position.
Installing the head restraints
A
A

Related Topics

Popular Owner Manuals