2019-2026 Lexus UX SUV Before driving User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Before driving for Your Lexus UX SUV First Generation (2019-2026)

113
3
3
Before driving
Before driving
3-1. Key information
Keys ..................................................
114
Digital Key......................................118
3-2. Opening, closing and locking the
doors
Side doors .....................................
120
Back door...................................... 124
Smart access system with push-
button start.................................
138
3-3. Adjusting the seats
Front seats.....................................
143
Rear seats...................................... 144
Head restraints............................ 145
3-4. Adjusting the steering wheel and
mirrors
Steering wheel.............................148
Inside rear view mirror............. 149
Outside rear view mirrors......150
3-5. Opening, closing the windows
and moon roof
Power windows...........................
154
Moon roof .....................................156
3-6. Favorite settings
Driving position memory ........
159
My Settings...................................163
114
3-1. Key information
3-1.Key information
The following keys are provided with
the vehicle.
Electronic keys
• Operating the smart access system with
push-button start (P.138)
• Operating the wireless remote control
function (P.116)
Mechanical keys
Key number plate
Card key (electronic key)
(if equipped)
Operating the smart access system with
push-button start (P.138)
■ Card key (if equipped)
● The card key is not waterproof.
● The mechanical key that is stored inside
the card key should be used only if a
problem arises, such as when the card
key does not operate properly.
● If it is difficult to take out the mechanical
key, push down the lock release button
using a pen tip etc. If it is still difficult to
pull it out, use a coin etc.
● To store the mechanical key in the card
key, insert it while pressing the lock
release button.
● If the battery cover is not installed and the
battery falls out or if the battery was
removed because the key got wet, rein-
stall the battery with the positive terminal
facing the Lexus emblem.
■ When riding in an aircraft
When bringing an electronic key onto an
aircraft, make sure you do not press any
buttons on the electronic key while inside
the aircraft cabin. If you are carrying an
electronic key in your bag etc., ensure that
the buttons are not likely to be pressed
accidentally. Pressing a button may cause
the electronic key to emit radio waves that
could interfere with the operation of the air-
craft.
■ Electronic key battery depletion
● The standard battery life is 1 to 2 years.
(The card key battery life is from one year
to one year and a half.)
● If the battery becomes low, an alarm will
sound in the cabin and a message will be
displayed on the multi-information dis-
play when the hybrid system stops.
Keys
Key types
A
B
C
D
115
3-1. Key information
3
Before driving
● To reduce key battery depletion when
the electronic key is to not be used for
long periods of time, set the electronic
key to the battery-saving mode.
(P.140)
● As the electronic key always receives
radio waves, the battery will become
depleted even if the electronic key is not
used. The following symptoms indicate
that the electronic key battery may be
depleted. Replace the battery when nec-
essary.
• The smart access system with push-but-
ton start or the wireless remote control
does not operate.
• The detection area becomes smaller.
• The LED indicator on the key surface
does not turn on.
● You can replace the battery by yourself
(P.392). However, as there is a dan-
ger that the electronic key may be dam-
aged, it is recommended that
replacement is carried out by your Lexus
dealer.
● To avoid serious deterioration, do not
leave the electronic key within 3 ft. (1 m)
of the following electrical appliances that
produce a magnetic field:
• TVs
• Personal computers
• Cellular phones, cordless phones and
battery chargers
• Recharging cellular phones or cordless
phones
• Table lamps
• Induction cookers
● If the electronic key is near the vehicle for
longer than necessary, even if the smart
access system with push-button start is
not operated, the key battery may
become depleted faster than normal.
When not operating the smart access
system with push-button start, it is recom-
mended to not stay with the electronic
key near the vehicle longer than neces-
sary.
■ If a message regarding the state of the
electronic key or power switch mode,
etc. is shown
To prevent trapping the electronic key
inside the vehicle, leaving the vehicle carry-
ing the electronic key on your person with-
out turning the power switch to OFF or
other passengers from unintentionally tak-
ing the key out of the vehicle, etc., a mes-
sage that prompts the user to confirm the
state of the electronic key or power switch
mode may be shown on the multi-informa-
tion display. In those cases, follow the
instructions on the display immediately.
■ If “Key Battery Low Replace Key Bat-
tery” is displayed on the multi-informa-
tion display
The electronic key has a low battery.
Replace the electronic key battery.
(P.392)
■ Replacing the battery
P.392
■ Confirmation of the registered key
number
The number of keys already registered to
the vehicle can be confirmed. Ask your
Lexus dealer for details.
■ If “A New Key has been Registered
Contact Your Dealer for Details” is dis-
played on the multi-information display
This message will be displayed each time
the driver’s door is opened when the doors
are unlocked from the outside for approxi-
mately 10 days after a new electronic key
has been registered. If this message is dis-
played but you have not had a new elec-
tronic key registered, ask your Lexus dealer
to check if an unknown electronic key
(other than those in your possession) has
been registered.
NOTICE
■ To prevent key damage
● Do not drop the keys, subject them to
strong shocks or bend them.
● Do not expose the keys to high tem-
peratures for long periods of time.
● Do not get the keys wet or wash them
in an ultrasonic washer, etc.
116
3-1. Key information
The electronic keys are equipped with
the following wireless remote control:
NOTICE
● Do not attach metallic or magnetic
materials to the keys or place the keys
close to such materials.
● Do not disassemble the keys.
● Do not attach a sticker or anything else
to the surface of the electronic key.
● Do not place the keys near objects that
produce magnetic fields, such as TVs,
audio systems and induction cookers.
● Do not place the keys near medical
electrical equipment such as low-fre-
quency therapy equipment or micro-
wave therapy equipment, and do not
receive medical attention with the keys
on your person.
■ Carrying the electronic key on your
person
Carry the electronic key 3.9 in. (10 cm)
or more away from electric appliances
that are turned on. Radio waves emitted
from electric appliances within 3.9 in. (10
cm) of the electronic key may interfere
with the key, causing the key to not func-
tion properly.
■ In case of a smart access system with
push-button start malfunction or
other key-related problems
P.430
■ When an electronic key is lost
P.428
■ Handling the card key (if equipped)
● Do not apply excess force when
inserting the mechanical key into the
card key. Doing so may damage the
card key.
● If the battery or card key terminals get
wet, the battery may corrode and the
card key may stop working.
If the key is dropped into water, or if
drinking water, etc., is spilled on the
key, immediately remove the battery
cover and wipe the battery and termi-
nals. (To remove the battery cover,
lightly grasp and pull it.) If the battery is
corroded, have your Lexus dealer
replace the battery.
● Do not crush the battery cover or use
a screwdriver to remove the battery
cover. Forcibly removing the battery
cover may bend or damage the key.
● If the battery cover is frequently
removed, the battery cover may
become loose.
● When installing the battery, make sure
to check the direction of the battery.
Installing the battery in the wrong
direction may cause the battery to
deplete rapidly.
● The surface of the card key may be
damaged, or its coating may peel off in
the following situations:
• The card key is carried together with
hard objects, such as coins and keys.
• The card key is scraped with a sharp
object, such as the tip of a mechanical
pencil.
• The surface of the card key is wiped
with thinner or benzene.
Wireless remote control
117
3-1. Key information
3
Before driving
Locks all the doors (P.120)
Unlocks all the doors (P.120)
Opens the windows and moon
roof
*1, 2
(P.120)
Opens and closes the power back
door
*1
(P.127)
Sounds the alarm (P.117)
*1
: If equipped
*2
: These settings must be customized at
your Lexus dealer.
■ Theft deterrent panic mode
When is pressed for longer than
about 1 second, an alarm will sound inter-
mittently and the vehicle lights will flash to
deter any person from trying to break into
or damage your vehicle.
To stop the alarm, press any button on the
electronic key.
To take out the mechanical key, push
the release button and take the key out.
The mechanical key can only be inserted in
one direction, as the key only has grooves
on one side. If the key cannot be inserted in
a lock cylinder, turn it over and re-attempt
to insert it.
After using the mechanical key, store it in
the electronic key. Carry the mechanical
key together with the electronic key. If the
electronic key battery is depleted or the
entry function does not operate properly,
you will need the mechanical key.
(P.430)
■ When required to leave the vehicle’s
key with a parking attendant
Lock the glove box as circumstances
demand. (P.321)
Remove the mechanical key for your own
use and provide the attendant with the elec-
tronic key only.
■ If you lose your mechanical keys
P.428
■ If a wrong key is used
The key cylinder rotates freely to isolate
inside mechanism.
Using the mechanical key
A
B
C
D
E
118
3-1. Key information
*
: If equipped
■ Free/open source software information
This product contains Free/open source
software (FOSS). License information
and/or the source code of this FOSS can
be obtained at the following URL:
https://www.denso.com/global/en/
opensource/dkey/toyota/
In order to use the Digital Key, you
need to install the Lexus App, Register
the Vehicle to the customer’s Lexus
App profile, and subscribe to Remote
Services, and enroll in Digital Key.
A Digital Key can be used when the
smartphone and server can com-
municate. The Digital Key may
become unusable if the smartphone
is not connected to the Internet. Be
sure to carry the electronic key of
the vehicle if traveling to a location
with unreliable communications.
If the smartphone battery is
depleted, the smartphone cannot be
used as Digital Key. If the battery
level is low, be sure to charge the
smartphone prior to going out.
The Digital Key system is related to
the smart access system with push-
button start. If the smart access sys-
tem with push-button start has been
deactivated in the vehicle customi-
zation setting, the Digital Key will
also be disabled.
Depending on the radio wave envi-
ronment, the Digital Key may not be
able to be used. (P.140)
When transferring vehicle owner-
ship, make sure to delete the Digital
Keys.
If the vehicle is not operated for 14
days or more, the Digital Key will
not connect automatically. There-
fore, it may take some time before
the system operates after a door
handle is touched.
A part of the services may be
stopped for a certain period of time
due to server maintenance. How-
ever, registered Digital Keys can be
used during the maintenance.
A smartphone with the Digital Key
App enabled will be able to lock and
unlock the doors, start the hybrid
system and perform any other oper-
ations as same as the electronic key
of the vehicle. Be especially careful
not to lose the smartphone or allow
it to be stolen.
If the smartphone is lost or stolen,
contact your Lexus dealer immedi-
ately.
When taking your vehicle to a Lexus
Digital Key
*
A smartphone can be used instead
of the electronic key of the vehicle
by installing the dedicated Digital
Key App on a smartphone.
Also, Digital Key can be shared
with your family or friends using the
Digital Key App.
Digital key usage conditions
Digital key precautions
119
3-1. Key information
3
Before driving
dealer for an inspection or repairs,
make sure to bring an electronic
key.
With the digital key alone, no vehi-
cle lights will illuminate when
approached to the vehicle. Also,
with the digital key alone, some
functions, such as the power back
door’s close & lock (walk-away)
function, etc., cannot be used.
120
3-2. Opening, closing and locking the doors
3-2.Opening, closing and locking t he doors
■ Smart access system with push-
button start
Carry the electronic key to enable this
function.
1 Grip the driver’s door handle to
unlock the door. Holding the
driver’s door handle for approxi-
mately 2 seconds unlocks all the
doors. Grip the front passenger
door handle to unlock all the
doors.
*
Make sure to touch the sensor on the back
of the handle.
The doors cannot be unlocked for 3 sec-
onds after the doors are locked.
*
: The door unlock settings can be
changed.
2 Touch the lock sensor (the indenta-
tion on the upper part of the front
door handle) to lock all the doors.
Check that the door is securely locked.
■ Wireless remote control
1 Locks all the doors
Check that the door is securely locked.
2 Unlocks all the doors
Pressing the button unlocks the driver’s
door. Pressing the button again within 3
seconds unlocks the other doors.
Press and hold to open the windows and
moon roof
*1, 2
*1
: If equipped
*2
: This setting must be customized at your
Lexus dealer.
■ Switching the door unlock function
It is possible to set which doors the entry
function unlocks using the wireless remote
control.
1 Turn the power switch off.
2 Cancel the intrusion sensor and tilt sen-
sor of the alarm system to prevent unin-
tended triggering of the alarm while
changing the settings. (P.74)
3 When the indicator light on the key sur-
face is not on, press and hold ,
or for approximately 5
seconds while pressing and holding
.
The setting changes each time an operation
is performed, as shown below. (When
changing the setting continuously, release
the buttons, wait for at least 5 seconds, and
repeat step
2.)
Side doors
Unlocking and locking the doors
from the outside
121
3-2. Opening, closing and locking the doors
3
Before driving
To prevent unintended triggering of the
alarm, unlock the doors using the wireless
remote control and open and close a door
once after the settings have been changed.
(If a door is not opened within 60 seconds
after is pressed, the doors will be
locked again and the alarm will automati-
cally be set.)
In a case that the alarm is triggered, imme-
diately stop the alarm. (P.72)
■ Locking the front doors from the outside
without a key
1 Push down the inside lock button.
(P.123)
2 Close the door.
The door cannot be locked if the power
switch is in ACC or ON, or the electronic
key is left inside the vehicle.
The key may not be detected correctly and
the door may be locked.
■ Impact detection door lock release sys-
tem
In the event that the vehicle is subject to a
strong impact, all the doors are unlocked.
Depending on the force of the impact or the
type of accident, however, the system may
not operate.
■ Operation signals
A buzzer sounds and the emergency flash-
ers flash to indicate that the doors have
been locked/unlocked. (Locked: Once;
Unlocked: Twice)
A buzzer sounds to indicate that all win-
dows are opening.
■ Security feature
If a door is not opened within approximately
60 seconds after the vehicle is unlocked,
the security feature automatically locks the
vehicle again.
■ When the door cannot be locked by the
lock sensor on the upper part of the
door handle
When the door cannot be locked even if the
lock sensor on the upper part of the door
handle is touched by a finger, touch the lock
sensor with the palm.
When gloves are being worn, remove the
gloves.
■ Open door warning buzzer
If an attempt to lock the doors is made when
a door is not fully closed, a buzzer sounds
continuously for 5 seconds. Fully close the
door to stop the buzzer, and lock the vehi-
cle once more.
■ Setting the alarm
Locking the doors will set the alarm system.
(P.72)
■ Conditions affecting the operation of
the smart access system with push-but-
ton start or wireless remote control
P.140
■ If the smart access system with push-
button start or the wireless remote con-
trol does not operate properly
● Use the mechanical key to lock and
unlock the doors. (P.430)
Multi-information
display/Beep
Unlocking function
Exterior: Beeps 3
times
Holding the driver’s
door handle unlocks
only the driver’s door.
Holding the front pas-
senger door handle
unlocks all the doors.
Exterior: Beeps
twice
Holding a front door
handle unlocks all the
doors.
122
3-2. Opening, closing and locking the doors
● Replace the key battery with a new one if
it is depleted. (P.392)
■ If the 12-volt battery is discharged
The doors cannot be locked and unlocked
using the smart access system with push-
button start or wireless remote control.
Lock or unlock the doors using the
mechanical key. (P.430)
■ Rear seat reminder function
● In order to remind you not to forget lug-
gage, etc. on the rear seat, when the
power switch is turned off after any of the
following conditions is met, a buzzer will
sound and a message will be displayed on
the multi-information display for approxi-
mately 6 seconds.
• The hybrid system is started within 10
minutes after opening and closing a rear
door.
• A rear door has been opened and closed
after the hybrid system was started.
However, if a rear door is opened and then
closed within approximately 2 seconds, the
rear seat reminder function may not oper-
ate.
● The rear seat reminder function deter-
mines that luggage, etc. has been placed
on a rear seat based on opening and
closing of a rear door. Therefore,
depending on the situation, the rear seat
reminder function may not operate and
you may still forget luggage, etc. on the
rear seat, or it may operate unnecessar-
ily.
● The rear seat reminder function can be
enabled/disabled. (P.469)
■ Customization
Settings (e.g. unlocking function using a
key) can be changed. (Customizable fea-
tures: P.462)
■ Door lock switches (to
lock/unlock)
1
Locks all the doors
WARNING
■ To prevent an accident
Observe the following precautions while
driving the vehicle.
Failure to do so may result in a door
opening and an occupant falling out,
resulting in death or serious injury.
● Ensure that all doors are properly
closed and locked.
● Do not pull the inside handle of the
doors while driving.
Be especially careful for the front
doors, as the doors may be opened
even if the inside lock buttons are in
locked position.
● Set the rear door child-protector locks
when children are seated in the rear
seats.
■ When opening or closing a door
Check the surroundings of the vehicle
such as whether the vehicle is on an
incline, whether there is enough space
for a door to open and whether a strong
wind is blowing. When opening or clos-
ing the door, hold the door handle tightly
to prepare for any unpredictable move-
ment.
Unlocking and locking the doors
from the inside
123
3-2. Opening, closing and locking the doors
3
Before driving
2 Unlocks all the doors
■ Inside lock buttons (to lock)
Push down the inside lock button to
lock the door.
■ Inside door handles (to unlock)
For the front doors
Pull the handle to unlock and open the
door.
When the door is unlocked, the inside lock
button will pop up.
For the rear doors
Pull the handle to unlock the door. Pull
the handle a second time to open the
door.
When the door is unlocked, the inside lock
button will pop up.
■ If a symbol indicating one or more doors
are open is shown on the multi-informa-
tion display
The hood or one or more of the doors are
not fully closed. The system also indicates
which doors are not fully closed. If the vehi-
cle reaches a speed of 3 mph (5 km/h), a
buzzer sounds to indicate that the door(s)
are not yet fully closed.
Make sure that the hood and all the doors
are closed.
The door cannot be opened from
inside the vehicle when the lock is set.
1 Unlock
2 Lock
These locks can be set to prevent children
from opening the rear doors. Push down
on each rear door switch to lock both rear
doors.
The following functions can be set or
canceled:
For instructions on customizing, refer to
P.460.
Rear door child-protector lock
Automatic door locking and
unlocking systems
124
3-2. Opening, closing and locking the doors
Function Operation
Speed linked door
locking function
All doors are auto-
matically locked
when vehicle speed
is approximately 12
mph (20 km/h) or
higher.
Shift position linked
door locking func-
tion
All doors are auto-
matically locked
when shifting the
shift position out of
P.
Shift position linked
door unlocking
function
All doors are auto-
matically unlocked
when shifting the
shift position to P.
Driver’s door linked
door unlocking
function
All doors are auto-
matically unlocked
when driver’s door is
opened within
approximately 45
seconds after turn-
ing the power switch
off.
Back door
The back door can be
locked/unlocked and
opened/closed by the following
procedures.
WARNING
Observe the following precautions.
Failure to do so may cause parts of the
body to be caught, resulting in death or
serious injury.
■ Before driving the vehicle
Make sure that the back door is fully
closed. If the back door is not fully closed,
it may open unexpectedly while driving
and hit nearby objects or luggage in the
luggage compartment may be thrown
out, causing an accident.
■ Caution while driving
● Keep the back door closed while driv-
ing.
If the back door is left open, it may hit
nearby objects while driving or lug-
gage may be unexpectedly thrown
out, causing an accident.
In addition, exhaust gases may enter
the vehicle, causing death or a serious
health hazard. Make sure to close the
back door before driving.
● Never let anyone sit in the luggage
compartment. In the event of sudden
braking, sudden swerving or a colli-
sion, they are susceptible to death or
serious injury.
■ When children are in the vehicle
Observe the following precautions.
Failure to do so may result in death or
serious injury.
● Do not allow children to play in the
luggage compartment.
If a child is accidentally locked in the
luggage compartment, they could
have heat exhaustion or other injuries.
125
3-2. Opening, closing and locking the doors
3
Before driving
WARNING
● Do not allow a child to open or close
the back door.
Doing so may cause the back door to
move unexpectedly, or cause the
child’s hands, arms, head, or neck to
be caught by the closing back door.
■ Operating the back door
Observe the following precautions.
Failure to do so may cause parts of the
body to be caught, resulting in death or
serious injury.
● Remove any heavy loads, such as
snow and ice, from the back door
before opening it. Failure to do so may
cause the back door to suddenly shut
again after it is opened.
● When opening or closing the back
door, thoroughly check to make sure
the surrounding area is safe.
● If anyone is in the vicinity, make sure
they are safe and let them know that
the back door is about to open or
close.
● Use caution when opening or closing
the back door in windy weather as it
may move abruptly in strong wind.
● Vehicles without power back door:
The back door may suddenly shut if it is
not opened fully. It is more difficult to
open or close the back door on an
incline than on a level surface, so
beware of the back door unexpectedly
opening or closing by itself. Make sure
that the back door is fully open and
secure before using the luggage com-
partment.
● Vehicles with power back door: The
back door may suddenly shut if it is not
opened fully, while on a steep incline.
Make sure that the back door is
secured before using the luggage
compartment.
● When closing the back door, take
extra care to prevent your fingers, etc.,
from being caught.
● When closing the back door, make
sure to press it lightly on its outer sur-
face. If the back door handle is used to
fully close the back door, it may result
in hands or arms being caught.
● Do not pull on the back door damper
stay (vehicles without power back
door) (P.127) or back door spindle
(vehicles with power back door)
(P.136) to close the back door, and
do not hang on the back door damper
stay (vehicles without power back
door) or back door spindle (vehicles
with power back door).
Doing so may cause hands to be
caught or the back door damper stay
(vehicles without power back door) or
back door spindle (vehicles with
power back door) to break, causing an
accident.
● If a bicycle carrier or similar heavy
object is attached to the back door, it
may suddenly shut again after being
opened, causing someone’s hands,
arms, head or neck to be caught and
injured. When installing an accessory
part to the back door, using a genuine
Lexus part is recommended.
126
3-2. Opening, closing and locking the doors
■ Smart access system with push-
button start
Carry the electronic key to enable this
function.
1 Locks all the doors
Check that the door is securely locked.
2 Unlocks all the doors
The doors cannot be unlocked for 3 sec-
onds after the doors are locked.
■ Wireless remote control
P.120
■ Door lock switch
P.122
■ Open
Raise the back door while pressing up
the back door opener switch.
■ Close
Lower the back door using the back
door handle, and make sure to push
the back door down from the outside
to close it.
■ Luggage compartment light
● The luggage compartment light turns on
when the back door is opened.
● If the luggage compartment light is left on
when the power switch is turned off, the
light will go off automatically after 20
minutes.
■ If the back door opener is inoperative
The back door can be unlocked from the
inside.
1 Remove the cover.
To protect the cover, place a rag between
the flathead screwdriver and the cover as
shown in the illustration.
Unlocking and locking the back
door from the outside
Unlocking and locking the back
door from the inside
Opening/closing the back door
(vehicles without power back
door)
127
3-2. Opening, closing and locking the doors
3
Before driving
2 Move the lever.
■ Opening/closing the back door
using the wireless remote control
Press the switch for 1 second.
If the back door is locked, unlock it
before operating the power back door.
■ Opening/closing the back door
from the inside
Press the switch for 1 second.
A buzzer sounds and the back door auto-
matically opens and closes.
Pressing the switch while the back door is
opening/closing stops the operation.
When the switch is pressed again for 1 sec-
ond during the halted operation, the back
door will perform the reverse operation.
■ Opening/closing the back door
from the outside
Open
NOTICE
■ Back door damper stays
The back door is equipped with damper
stays that hold the back door in
place.
Observe the following precautions.
Failure to do so may cause damage to
the back door damper stay resulting
in malfunction.
● Do not attach any foreign objects,
such as stickers, plastic sheets, or
adhesives to the damper stay rod.
● Do not touch the damper stay rod with
gloves or other fabric items.
● Do not attach any accessories other
than genuine Lexus parts to the back
door.
● Do not place your hand on the damper
stay or apply lateral forces to it.
A
A
Opening/closing the back door
(vehicles with power back door)
128
3-2. Opening, closing and locking the doors
When the back door is unlocked: Press the
back door opener switch.
When the back door is locked: While car-
rying the electronic key on your person,
press the back door opener switch.
A buzzer sounds and the back door auto-
matically opens.
Pressing the switch while the back door is
opening stops the operation.
Close
Press the switch on the lower part
of the back door.
A buzzer sounds and the back door auto-
matically closes.
Pressing the switch while the back
door is closing stops the operation.
Pressing the switch again will open
the back door automatically.
Close the back door and lock all
doors after moving away from the
back door (close & lock [Walk-
Away] function)
1 Close all of the doors except the
back door, carrying an electronic
key and press the switch on
the lower part of the back door.
A different buzzer than the normal one will
sound and the close & lock (Walk-Away)
function will go into standby.
2 While the buzzer is sounding, move
away from the back door.
When the sensor detects that you are
away from the back door, the buzzer will
sound and the emergency flashers (if
equipped) will flash. Depending on the
direction of moving away from the back
door, the location and how to hold the
electronic key or circumstances, it may not
be detected properly.
All the doors other than the back door will
be locked, and after the back door is
closed, the back door will also be locked.
When all the doors have been closed and
locked, the buzzer (if equipped) will sound
and the emergency flashers will flash.
(P.121)
The standby state is canceled if you do not
move away from the back door for 30 sec-
onds. To operate the function again, per-
form the procedure again from the
beginning.
If you approach the back door carrying the
electronic key, the back door operation
will stop, all the doors will be unlocked, and
the buzzer (if equipped) will sound and the
emergency flashers will flash. (P.121)
If the switch is pressed after the
back door operation has stopped, the
close & lock (Walk-Away) function will go
129
3-2. Opening, closing and locking the doors
3
Before driving
into standby again.
Close the back door and lock all
doors (close & lock function)
*
*
: These settings must be customized at
your Lexus dealer.
Close all of the doors except the
back door, carrying an electronic
key and press the switch on
the lower part of the back door.
A different buzzer than the normal one will
sound and the power back door will begin
closing automatically. When the power
back door is closed, all of the doors will
lock simultaneously and operation signals
will indicate that all of the doors have been
locked.
If the switch is pressed while the
power back door is closing, the operation
will stop.
Pressing the switch again will close
the power back door automatically.
■ Closing the back door using the
back door handle
Lower the back door using the back
door handle, then a buzzer sounds and
the back door automatically closes.
■ Hands Free Power Back Door
1 While carrying an electronic key,
stand within the smart access sys-
tem with push-button start opera-
tion range, approximately 19.7 to
27.6 in. (50 to 70 cm) from the
rear bumper.
Kick sensor
Hands Free Power Back Door
operation detection area
Smart access system with push-
button start operation detection
area (P.139)
2 Perform a kick operation by mov-
ing your foot to within approxi-
mately 3.9 in. (10 cm) of the rear
bumper, and then pulling your foot
back after the buzzer sounds.
• Perform the entire kick operation
within 1 second.
• The Hands Free Power Back Door
A
B
C
130
3-2. Opening, closing and locking the doors
will not start operating while a foot is
detected under the rear bumper.
• Operate the Hands Free Power
Back Door without contacting the
rear bumper with your foot.
• If another electronic key is in the
cabin or luggage compartment, it
may take slightly longer than normal
for the operation to occur.
• If the buzzer sounds twice, perform
a kick operation again.
Kick sensor
Hands Free Power Back Door
operation detection area
3 When the kick sensor detects that
your foot is pulled back, a buzzer
will sound and the back door will
automatically fully open/close.
If a foot is moved under the rear bumper
while the back door is operating, the back
door will stop moving.
■ Closing and locking the back door
after moving away from the back
door using the kick sensor (Hands
Free close & lock [Walk-Away]
function)
*
*
: These settings must be customized at
your Lexus dealer.
The Hands Free Power Back Door
enables automatic closing and locking
of the power back door by putting your
foot near the right lower part of the
rear bumper, moving it away from the
rear bumper, and moving away from
the back door. When operating the
Hands Free Power Back Door, make
sure that the power switch is in OFF,
the kick sensor operation is enabled
(P.137) and you are carrying an
electronic key.
1 While carrying an electronic key,
stand within the smart access sys-
tem with push-button start opera-
tion range, approximately 11.8 to
19.7 in. (30 to 50 cm) from the rear
bumper.
Kick sensor
Hands Free Power Back Door
operation detection area
Smart access system with push-
button start operation detection
area (P.139)
2 Perform a kick operation by mov-
ing your foot to within approxi-
mately 3.9 in. (10 cm) of the rear
bumper and then pulling it back.
Perform the entire kick operation within 1
second.
The back door will not start operating
while a foot is detected under the rear
A
B
A
B
C
131
3-2. Opening, closing and locking the doors
3
Before driving
bumper.
Operate the Hands Free Power Back
Door without contacting the rear bumper
with your foot.
If another electronic key is in the cabin or
luggage compartment, it may take slightly
longer than normal for the operation to
occur.
Kick sensor
Hands Free Power Back Door
operation detection area
3 When the kick sensor detects that
your foot is pulled back, a different
buzzer than the normal one will
sound and the Hands Free close &
lock (Walk-Away) function will go
into standby.
4 While the buzzer is sounding, move
away from the back door.
When the sensor detects that you are
away from the back door, the buzzer will
sound and the emergency flashers (if
equipped) will flash. Depending on the
direction of moving away from the back
door, the location and how to hold the
electronic key or circumstances, it may not
be detected properly.
All the doors other than the back door will
be locked, and after the back door is
closed, the back door will also be locked.
When all the doors have been closed and
locked, the buzzer (if equipped) will sound
and the emergency flashers will flash.
(P.121)
The standby state is canceled if you do not
move away from the back door in 30 sec-
onds. To operate the function again, per-
form the procedure again from the
beginning.
If you approach the back door carrying the
electronic key, the back door operation
will stop, all the doors will be unlocked, and
the buzzer (if equipped) will sound and the
emergency flashers will flash. (P.121)
If the power back door is operated after
the back door operation has stopped, the
Hands Free close & lock (Walk-Away)
function will go into standby again.
■ Luggage compartment light
● The luggage compartment light turns on
when the back door is opened.
● If the luggage compartment light is left on
when the power switch is turned off, the
light will go off automatically after 20
minutes.
■ Power back door operating conditions
With the power back door operations set to
ON, it can automatically open and close for
the following conditions:
● The power back door is unlocked. How-
ever, the power back door will operate if
it is locked, in the following situations:
• When the electronic key is being carried
and the power back door opener switch
is pressed
• When the wireless remote control is
used
*
● When the power switch is in ON, in addi-
tion to the above for the opening opera-
tions, the back door operates for any of
the following conditions:
• Parking brake is engaged
• The brake pedal is depressed
• The shift position is in P
*
: When configured with the customization
function so that it can be operated after
being unlocked, operate the back door
after it has been unlocked.
■ Hands Free Power Back Door operat-
ing conditions
● When the Hands Free Power Back Door
operation setting is turned on
A
B
132
3-2. Opening, closing and locking the doors
● When an electronic key is carried within
the operation range
■ Back door closer
In the event that the back door is left slightly
open, the back door closer will automati-
cally close it to the fully closed position.
Whatever the state of the power switch, the
back door closer operates.
■ Operation of the power back door
● A buzzer sounds and the emergency
flashers flash twice to indicate that the
back door is opening/closing.
● When the power back door operations
are OFF, the power back door does not
operate but it can be opened and closed
by hand.
● When the power back door automati-
cally opens, if an abnormality due to peo-
ple or objects is detected, operation will
stop.
■ Back door reserve lock function
This function reserves locking of all doors
beforehand, when the power back door is
open.
When the following procedure is per-
formed, all the doors except the power
back door are locked and then power back
door will also be locked at the same time it
is closed.
1 Close all doors, except the back door.
2 During the power back door closing
operation, lock the doors using the
smart access system with push-button
start (P.120) or the wireless remote
control. (P.116)
A buzzer sounds and the emergency flash-
ers flash to indicate that all the doors have
been closed and locked.
Before leaving the vehicle, make sure that
all the doors are closed and locked. The
doors may not be locked due to the jam
protection function or door lock prevention
function.
■ Close & lock (Walk-Away) function
operating conditions
This function can be operated when all of
the following conditions are met:
● Close & lock (Walk-Away) function is
enabled.
● An electronic key is not detected within
the vehicle.
● All of the doors other than the back door
are closed.
● The power switch is in OFF.
● The electronic key is within the effective
range (detection areas).
■ Situations in which the close & lock
(Walk-Away) function may not operate
properly
In the following situations, the function may
not operate properly:
● When the smart access system with
push-button start does not operate prop-
erly.
● When the close & lock function does not
operate properly.
● When moving away from the back door
while the close & lock (Walk-Away)
function is in the standby state.
■ Close & lock function
*
operating condi-
tions
This function can be operated when all of
the following conditions are met:
● An electronic key is not detected within
the vehicle.
● All of the doors other than the power
back door are closed.
● The power switch is in OFF.
*
: These settings must be customized at
your Lexus dealer.
■ Situations in which the close & lock
function
*
may not operate properly
In the following situations, the close & lock
function may not operate properly:
● If the switch on the lower part of
the power back door (P.127) is
pressed by a hand which is holding an
electronic key
● If the switch on the lower part of
the power back door (P.127) is
pressed when the electronic key is in a
133
3-2. Opening, closing and locking the doors
3
Before driving
bag, etc. that is placed on the ground
● If the switch on the lower part of
the power back door (P.127) is
pressed with the electronic key not near
the vehicle
*
: These settings must be customized at
your Lexus dealer.
● A foot is put near the right lower part of
the rear bumper and moved away from
the rear bumper.
The power back door may also be oper-
ated by putting a hand, an elbow, a knee,
etc. near the right lower part of the rear
bumper and moving it away from the rear
bumper. Make sure to put it close
enough to the right lower part of the rear
bumper.
■ Situations in which the Hands Free
Power Back Door may not operate
properly
In the following situations, the Hands Free
Power Back Door may not operate prop-
erly:
● When a foot remains under the rear
bumper
● If the rear bumper is strongly hit with a
foot or is touched for a while
If the rear bumper has been touched for a
while, wait for a short time before
attempting to operate the Hands Free
Power Back Door again.
● When operated while a person is too
close to the rear bumper
● When an external radio wave source
interferes with the communication
between the electronic key and the vehi-
cle (P.140)
● When the vehicle is parked near an elec-
trical noise source or a metallic object
which affects the sensitivity of the Hands
Free Power Back Door, such as a pay
parking spot, gas station, electrically
heated road, fluorescent light or iron
plate
● When the vehicle is near a TV tower,
electric power plant, radio station, large
display, airport or other facility that gen-
erates strong radio waves or electrical
noise
● When a large amount of water is applied
to the rear bumper, such as when the
vehicle is being washed or in heavy rain
● When mud, snow, ice, etc. is attached to
the rear bumper
● When the vehicle has been parked for a
while near objects that may move and
contact the rear bumper, such as plants
● When an accessory is installed to the rear
bumper
If an accessory has been installed, turn
the Hands Free Power Back Door opera-
tion setting off.
■ Preventing unintentional operation of
the Hands Free Power Back Door
When an electronic key is in the operation
range, the Hands Free Power Back Door
may operate unintentionally, so be careful
in the following situations.
● When a large amount of water is applied
to the rear bumper, such as when the
vehicle is being washed or in heavy rain
● When dirt is wiped off the rear bumper
● When a small animal or small object, such
as a ball, moves under the rear bumper
● When an object is moved from under the
rear bumper
● If someone is swinging their legs while sit-
ting on the rear bumper
● If the legs or another part of someone’s
body contacts the rear bumper while
passing by the vehicle
● When the vehicle is parked near an elec-
trical noise source which affects the sen-
sitivity of the Hands Free Power Back
Door, such as a pay parking spot, gas sta-
tion, electrically heated road, or fluores-
cent light
● When the vehicle is near a TV tower,
electric power plant, radio station, large
display, airport or other facility that gen-
erates strong radio waves or electrical
noise
● When the vehicle is parked in a place
where objects such as plants are near the
rear bumper
134
3-2. Opening, closing and locking the doors
● If luggage, etc. is set near the rear
bumper
● If accessories or a vehicle cover is
installed/removed near the rear bumper
● When the vehicle is being towed
To prevent unintentional operation, turn the
Hands Free Power Back Door operation
setting off.
■ Hands Free close & lock (Walk-Away)
function operating conditions
This function can be operated when all of
the following conditions are met:
● Hands Free close & lock (Walk-Away)
function is enabled
*
.
● Hands Free Power Back Door is
enabled.
● An electronic key is not detected within
the vehicle.
● All of the doors other than the back door
are closed.
● The power switch is in OFF.
● The electronic key is within the effective
range (detection areas).
*
: These settings must be customized at
your Lexus dealer.
■ Situations in which the Hands Free close
& lock (Walk-Away) function
*
may not
operate properly
In the following situations, the function may
not operate properly:
● When the smart access system with
push-button start does not operate prop-
erly.
● When the close & lock function does not
operate properly.
● When moving away from the back door
while the Hands Free close & lock (Walk-
Away) function is in the standby state.
● When the Hands Free Power Back Door
does not operate properly.
*
: These settings must be customized at
your Lexus dealer.
■ When reconnecting the 12-volt battery
To enable the power back door to operate
properly, close the back door manually.
■ Jam protection function
Sensors are installed in the right and left
sides of the power back door. When the
door is automatically closing and the sen-
sors are pushed due to an object being
clamped, etc., the jam protection function
operates.
From that position the door automatically
moves a little in the opposite direction and
then the function stops.
■ If the back door opener is inoperative
The back door can be unlocked from the
inside.
1 Remove the cover.
To protect the cover, place a rag between
the flathead screwdriver and the cover as
shown in the illustration.
2 Move the lever.
135
3-2. Opening, closing and locking the doors
3
Before driving
■ Customization
Some functions can be customized. (Cus-
tomizable features: P.462)
WARNING
■ Back door closer
● In the event that the back door is left
slightly open, the back door closer will
automatically close it to the fully closed
position. It takes several seconds
before the back door closer begins to
operate. Be careful not to catch fingers
or anything else in the back door, as
this may cause bone fractures or other
serious injuries.
● Be careful not to catch fingers or any-
thing else when using the back door
closer as it still operates when the
power back door system is canceled.
■ Power back door
Observe the following precautions when
operating the power back door.
Failure to do so may cause death or seri-
ous injury.
● Check the safety of the surrounding
area to make sure there are no obsta-
cles or anything that could cause any
of your belongings to get caught.
● If anyone is in the vicinity, make sure
they are safe and let them know that
the back door is about to open or
close.
● If the power back door system is dis-
abled, while the back door is operating
automatically, the automatic opera-
tion is stopped. The back door then
has to be operated manually. Take
extra care in this situation, as the back
door may open or close suddenly.
● If the operating conditions of the
power back door (P.131) are no lon-
ger met, a buzzer may sound and the
back door may stop opening or clos-
ing. The back door then has to be
operated manually. Take extra care
when on an incline, as the back door
may open or close abruptly.
● On an incline, the back door may sud-
denly shut after it opens. Make sure
the back door is fully open and secure.
● In the following situations, the power
back door may detect an abnormality
and automatic operation may be
stopped. In this case, the back door
has to be operated manually. Take
extra care in this situation, as the back
door may open or close suddenly.
• When the back door contacts an
obstacle
• When the 12-volt battery voltage sud-
denly drops, such as when the power
switch is turned to ON or the hybrid
system is started during automatic
operation
● If a bicycle carrier or similar heavy
object is attached to the back door, the
power back door may not operate,
causing itself to malfunction, or the
back door may suddenly shut again
after being opened, causing some-
one’s hands, arms, head or neck to be
caught and injured. When installing an
accessory part to the back door, using
a genuine Lexus part is recommended.
136
3-2. Opening, closing and locking the doors
WARNING
■ Jam protection function
Observe the following precautions.
Failure to do so may cause death or seri-
ous injury.
● Never use any part of your body to
intentionally activate the jam protec-
tion function.
● The jam protection function may not
work if something gets caught just
before the back door fully closes. Be
careful not to get fingers caught or
anything else.
● The jam protection function may not
work depending on the shape of the
object that is caught. Be careful not to
catch fingers or anything else.
■ Hands Free Power Back Door
Observe the following precautions.
Failure to do so may cause death or seri-
ous injury.
● Check the safety of the surrounding
area to make sure there are no obsta-
cles or anything that could cause any
of your belongings to get caught.
● Exhaust gases cause the exhaust pipes
to become quite hot. When operating
the Hands Free Power Back Door, be
careful not to touch the exhaust pipe.
● Do not operate the Hands Free Power
Back Door if there is little space under
the rear bumper.
■ Close & lock (Walk-Away) function
and Hands Free close & lock (Walk-
Away) function
*
*
: These settings must be customized at
your Lexus dealer.
The back door starts to close automati-
cally when leaving the back door. Check
the safety of the surrounding area to
make sure there are no obstacles or any-
thing that could cause any of your
belongings to get caught.
NOTICE
■ Back door spindles
The back door is equipped with spindles
that hold the back door in place.
Observe the following precautions.
Failure to do so may cause damage to
the back door spindle , resulting in
malfunction.
● Do not attach any foreign objects,
such as stickers, plastic sheets, or
adhesives to the spindle rod.
● Do not touch the spindle rod with
gloves or other fabric items.
● Do not attach any accessories other
than genuine Lexus parts to the power
back door.
● Do not place your hand on the spindle
or apply lateral forces to it.
■ To prevent back door closer malfunc-
tion
Do not apply excessive force to the back
door while the back door closer is oper-
ating. Applying excessive force may
cause the back door closer to malfunc-
tion.
■ To prevent damage to the power
back door
● Make sure that there is no ice between
the back door and frame that would
prevent movement of the back door.
Operating the power back door when
excessive load is present on the back
door may cause a malfunction.
A
A
137
3-2. Opening, closing and locking the doors
3
Before driving
The settings of the power back door
system can be changed on the center
display.
If the power back door is disabled, it will
remain disabled unless it is enabled on the
multi-information display. (It will not be
enabled even when the power switch is
turned off and then back to ON.)
The open position of the power back
door can be adjusted.
1
Stop the back door in the desirable
position. (P.127)
NOTICE
● Do not apply excessive force to the
back door while the power back door
is operating.
● Take care not to damage the sensors
(installed on the right and left edges of
the power back door) (P.134) with a
knife or other sharp object. If the sen-
sor is disconnected, the power back
door will not close automatically.
■ Close & lock function
*
When closing the power back door
using the close & lock function, a differ-
ent buzzer than the normal one will
sound before the operation begins.
To check that the operation has started
correctly, check that a different buzzer
than the normal one has sounded.
Additionally, when the power back door
is fully closed and locked, operation sig-
nals will indicate that all of the doors have
been locked.
Before leaving the vehicle, make sure
that the operation signals have operated
and that all of the doors are locked.
*
: These settings must be customized at
your Lexus dealer.
■ Hands Free Power Back Door pre-
cautions
Observe the following to ensure that the
power back door function operates
properly:
● Do not apply coatings that have a rain
clearing (hydrophilic) effect, or other
coatings, to the lower center part of
the rear bumper.
● Do not subject the rear bumper to a
strong impact.
If the rear bumper has been subjected
to a strong impact, the Hands Free
Power Back Door may not operate
properly. If the Hands Free Power
Back Door does not operate in the fol-
lowing situations, have the vehicle
inspected by your Lexus dealer.
• The kick sensor or its surrounding area
has been subjected to a strong impact.
• The lower center part of the rear
bumper is scratched or damaged.
● Do not disassemble the rear bumper.
● Do not attach stickers to the rear
bumper.
● Do not paint the rear bumper.
Changing settings of the power
back door system (vehicles with
power back door)
Adjusting the open position of
the back door (vehicles with
power back door)
138
3-2. Opening, closing and locking the doors
2 Press and hold the power back
door switch on the back door for 2
seconds.
• When the settings are completed,
the buzzer sounds 4 times.
• When opening the back door the
next time, the back door will stop at
that position.
■ Returning the back door automatic stop
position to the initial settings
Press and hold the power back door switch
on the back door for 7 seconds.
After the buzzer sounds 4 times, it sounds
twice more. When the power back door
does the opening operation the next time,
the door will open to the initial settings posi-
tion.
■ Antenna location
Antennas outside the cabin
Antennas inside the cabin
Operating the smart access system with
push-button start (P.138)
Smart access system with
push-button start
The following operations can be
performed simply by carrying the
electronic key (including the card
key) on your person, for example in
your pocket. The driver should
always carry the electronic key.
Locks and unlocks the doors
(P.120)
Locks and unlocks the back door
(P.124)
Starts the hybrid system
(P.177)
A
B
139
3-2. Opening, closing and locking the doors
3
Before driving
■ Effective range (areas within which the
electronic key is detected)
When locking or unlocking the doors
The system can be operated when the elec-
tronic key is within about 2.3 ft. (0.7 m) of
either of the outside front door handles and
back door opener switch. (Only the doors
detecting the key can be operated.)
When starting the hybrid system or
changing power switch modes
The system can be operated when the elec-
tronic key is inside the vehicle.
■ If an alarm sounds or a warning message
is displayed
An alarm sounds and warning message dis-
plays shown on the multi-information dis-
play are used to protect against
unexpected accidents or theft of the vehicle
resulting from erroneous operation. When
a warning message is displayed, take
appropriate measures based on the dis-
played message.
When only an alarm sounds, circumstances
and correction procedures are as follows.
● When an exterior alarm sounds once for
5 seconds
● When an interior alarm pings continu-
ously
■ If “Key Detected in Vehicle” is shown on
the multi-information display
An attempt was made to lock the doors
using the smart access system with push-
button start while the electronic key was still
inside the vehicle. Retrieve the electronic
key from the vehicle and lock the doors
again.
■ Battery-saving function
The battery-saving function will be acti-
vated in order to prevent the electronic key
battery and the 12-volt battery from being
discharged while the vehicle is not in opera-
tion for a long time.
● In the following situations, the smart
access system with push-button start may
take some time to unlock the doors. Also
the illuminated entry system may not
operate properly.
• The electronic key has been left in an
area of approximately 11.5 ft. (3.5 m) of
the outside of the vehicle for 40 seconds
or longer.
• The smart access system with push-but-
ton start has not been used for 5 days or
longer.
● If the smart access system with push-but-
ton start has not been used for 14 days or
longer, the doors cannot be unlocked at
any doors except the driver’s door. In this
case, take hold of the driver’s door han-
dle, or use the wireless remote control or
the mechanical key, to unlock the doors.
Situation
Correction proce-
dure
An attempt was
made to lock the
vehicle while a door
was open.
Close all of the
doors and lock the
doors again.
A
B
Situation
Correction proce-
dure
The power switch
was turned to ACC
while the driver’s
door was open (or
the driver’s door was
opened while the
power switch was in
ACC).
Turn the power
switch to OFF and
close the driver’s
door.
140
3-2. Opening, closing and locking the doors
■ Turning an electronic key to battery-
saving mode
● When battery-saving mode is set, battery
depletion is minimized by stopping the
electronic key from receiving radio
waves.
Press twice while pressing and
holding .
Confirm that the electronic key indicator
flashes 4 times.
While the battery-saving mode is set, the
smart access system with push-button start
cannot be used. To cancel the function,
press any of the electronic key buttons.
● Electronic keys that will not be used for
long periods of time can be set to the bat-
tery-saving mode in advance.
■ When electronic key function stops
If the position of the electronic key has not
changed for a certain amount of time such
as when the electronic key is left some-
where, the function of the electronic key
stops to reduce depletion of the battery.
In this case, function can automatically be
restored by moving the position of the key
such as by lifting it up.
■ Conditions affecting operation
The smart access system with push-button
start uses weak radio waves. In the follow-
ing situations, the communication between
the electronic key and the vehicle may be
affected, preventing the smart access sys-
tem with push-button start, wireless remote
control and immobilizer system from oper-
ating properly.
● When the electronic key battery is
depleted
● Near a TV tower, electric power plant,
gas station, radio station, large display,
airport or other facility that generates
strong radio waves or electrical noise
● When the electronic key is in contact
with, or is covered by the following metal-
lic objects
• Cards to which aluminum foil is attached
• Cigarette boxes that have aluminum foil
inside
• Metallic wallets or bags
• Coins
• Hand warmers made of metal
• Media such as CDs and DVDs
● When other wireless key (that emits
radio waves) is being used nearby
● When carrying the electronic key
together with the following devices that
emit radio waves
• Portable radio, cellular phone, cordless
phone or other wireless communication
devices
• Another electronic key or a wireless key
that emits radio waves
• Personal computers or personal digital
assistants (PDAs)
• Digital audio players
• Portable game systems
● If window tint with a metallic content or
metallic objects are attached to the rear
window
● When the electronic key is placed near a
battery charger or electronic devices
● When the vehicle is parked in a pay park-
ing spot where radio waves are emitted.
If the doors cannot be locked/unlocked
using the smart access system with push-
button start, lock/unlock the doors by per-
forming any of the following:
● Bring the electronic key close to either
front door handle and operate the entry
function.
● Operate the wireless remote control.
If the doors cannot be locked/unlocked
using the above methods, use the mechani-
cal key. (P.430)
If the hybrid system cannot be started using
the smart access system with push-button
start, refer to P.431.
141
3-2. Opening, closing and locking the doors
3
Before driving
■ Note for the entry function
● Even when the electronic key is within the
effective range (detection areas), the sys-
tem may not operate properly in the fol-
lowing cases:
• The electronic key is too close to the win-
dow or outside door handle, near the
ground, or in a high place when the doors
are locked or unlocked.
• The electronic key is on the instrument
panel, luggage compartment or floor, or
in the door pockets or glove box when
the hybrid system is started or power
switch modes are changed.
• A person is between the vehicle and
electronic key, blocking radio waves
when the door is unlocked
● Do not leave the electronic key on top of
the instrument panel or near the door
pockets when exiting the vehicle.
Depending on the radio wave reception
conditions, it may be detected by the
antenna outside the cabin and the doors
will become lockable from the outside,
possibly trapping the electronic key
inside the vehicle.
● As long as the electronic key is within the
effective range, the doors may be locked
or unlocked by anyone. However, only
the doors detecting the electronic key
can be used to unlock the vehicle.
● Even if the electronic key is not inside the
vehicle, it may be possible to start the
hybrid system if the electronic key is near
the window.
● The doors may unlock if a large amount
of water splashes on the door handle,
such as in the rain or in a car wash when
the electronic key is within the effective
range. (The doors will automatically be
locked after approximately 60 seconds if
the doors are not opened and closed.)
● If the wireless remote control is used to
lock the doors when the electronic key is
near the vehicle, there is a possibility that
the door may not be unlocked by the
entry function. (Use the wireless remote
control to unlock the doors.)
● Touching the door lock sensor while
wearing gloves may delay or prevent
lock operation. Remove the gloves and
touch the lock sensor again.
● Some models: When the lock operation
is performed using the lock sensor, rec-
ognition signals will be shown up to two
consecutive times. After this, no recogni-
tion signals will be given.
● If the door handle becomes wet while the
electronic key is within the effective
range, the door may lock and unlock
repeatedly. In that case, follow the follow-
ing correction procedures to wash the
vehicle.
• Place the electronic key in a location 6 ft.
(2 m) or more away from the vehicle.
(Take care to ensure that the key is not
stolen.)
• Set the electronic key to battery-saving
mode to disable the smart access system
with push-button start. (P.140)
● If the electronic key is inside the vehicle
and a door handle becomes wet during a
car wash, a message may be shown on
the multi-information display and a
buzzer will sound outside the vehicle. To
turn off the alarm, lock all the doors.
● The lock sensor may not work properly if
it comes into contact with ice, snow, mud,
etc. Clean the lock sensor and attempt to
operate it again.
● A sudden approach to the effective
range or door handle may prevent the
doors from being unlocked. In this case,
return the door handle to the original
position and check that the doors unlock
before pulling the door handle again.
● If there is another electronic key in the
detection area, it may take slightly longer
to unlock the doors after the door handle
is gripped.
■ When the vehicle is not driven for
extended periods
● To prevent theft of the vehicle, do not
leave the electronic key within 6 ft. (2 m)
of the vehicle.
● The smart access system with push-but-
ton start can be deactivated in advance.
(P.460)
● Battery-saving mode can reduce the
power consumption of electronic keys.
(P.140)
142
3-2. Opening, closing and locking the doors
■ To operate the system properly
Make sure to carry the electronic key when
operating the system. Do not get the elec-
tronic key too close to the vehicle when
operating the system from the outside of
the vehicle.
Depending on the position and holding
condition of the electronic key, the key may
not be detected correctly and the system
may not operate properly. (The alarm may
go off accidentally, or the door lock preven-
tion may not operate.)
■ If the smart access system with push-
button start does not operate properly
● Locking and unlocking the doors: Use
the mechanical key. (P.430)
● Starting the hybrid system: P.431
■ Customization
Settings (e.g. smart access system with
push-button start) can be changed.
(Customizable features: P.460)
If the smart access system with push-button
start has been deactivated in a customized
setting, refer to the explanations for the fol-
lowing operations.
● Locking and unlocking the doors: Use
the wireless remote control or mechani-
cal key. (P.120, 430)
● Starting the hybrid system and changing
power switch modes: P.431
● Stopping the hybrid system: P.178
WARNING
■ Caution regarding interference with
electronic devices
● People with implantable cardiac pace-
makers, cardiac resynchronization
therapy-pacemakers or implantable
cardioverter defibrillators should
maintain a reasonable distance
between themselves and the smart
access system with push-button start
antennas. (P.138)
The radio waves may affect the opera-
tion of such devices. If necessary, the
entry function can be disabled. Ask
your Lexus dealer for details, such as
the frequency of radio waves and tim-
ing of the emitted radio waves. Then,
consult your doctor to see if you
should disable the entry function.
● User of any electrical medical device
other than implantable cardiac pace-
makers, cardiac resynchronization
therapy-pacemakers or implantable
cardioverter defibrillators should con-
sult the manufacturer of the device for
information about its operation under
the influence of radio waves.
Radio waves could have unexpected
effects on the operation of such medi-
cal devices.
Ask your Lexus dealer for details for dis-
abling the entry function.
143
3-3. Adjusting the seats
3
Before driving
3-3.Adjusting the seats
Seat position adjustment switch
Seat cushion (front) angle adjust-
ment switch
Seatback angle adjustment switch
Vertical height adjustment switch
Lumbar support adjustment switch
(for driver’s side)
■ When adjusting the seat
● Make sure that any surrounding passen-
gers or objects are not contact the seat.
● Take care when adjusting the seat so that
the head restraint does not touch the ceil-
ing.
■ Power easy access system (if equipped)
The driver’s seat and steering wheel move
in accordance with power switch mode and
the driver’s seat belt condition. (P.159)
■ Jam protection function (vehicles with
driving position memory)
While the driving position is recalled or the
power easy access system is operating, if an
object is stuck behind the front seat, the
front seat will stop and then slightly move
forward.
When the jam protection function operates,
the seat stops at a position other than the
set seat position. Check the seat position.
Front seats
The seats can be adjusted (longitu-
dinally, vertically, etc.). Adjust the
seat to ensure the correct driving
posture.
Adjustment procedure
A
B
C
D
E
WARNING
■ When adjusting the seat position
● Take care when adjusting the seat
position to ensure that other passen-
gers are not injured by the moving
seat.
● Do not put your hands under the seat
or near the moving parts to avoid
injury.
Fingers or hands may become
jammed in the seat mechanism.
● Make sure to leave enough space
around the feet so they do not get
stuck.
■ Seat adjustment
To reduce the risk of sliding under the lap
belt during a collision, do not recline the
seat more than necessary.
If the seat is too reclined, the lap belt may
slide past the hips and apply restraint
forces directly to the abdomen, or your
neck may contact the shoulder belt,
increasing the risk of death or serious
injury in the event of an accident.
Adjustments should not be made while
driving as the seat may unexpectedly
move and cause the driver to lose con-
trol of the vehicle.
144
3-3. Adjusting the seats
■ Before folding down the rear seat-
backs
1
Park the vehicle in a safe place.
Apply the parking brake firmly and shift the
shift position to P. (P.192)
2 Adjust the position of the front seat
and the angle of the seatback.
(P.143)
Depending on the position of the front
seat, if the seatback is folded backward, it
may interfere with the operation of the rear
seat.
3 Lift up and push down the head
restraints of the rear outboard
seats, and lower the head restraint
of the rear center seat. (P.145)
4
Stow the armrest of the rear seat if
it is pulled out. (P.338)
This step is not necessary when operating
the left side seat only.
■ Folding down rear seatbacks
Pull the seatback lock release lever
and fold the seatback down.
■ Returning the rear seatbacks
To avoid trapping the seat belt
between the seat and the inside of the
vehicle, pass the seat belt inside the
seat belt guide and then return the
seatback securely to the locked posi-
tion.
Rear seats
The seatbacks of the rear seats can
be folded down.
Folding down the rear seatbacks
WARNING
■ When folding the rear seatbacks
down
Observe the following precautions.
Failure to do so may result in death or
serious injury.
● Do not attempt to fold the seatbacks
down while driving.
● Stop the vehicle on level ground, set
the parking brake and shift the shift
position to P.
● Do not allow anyone to sit on a folded
seatback or in the luggage compart-
ment while driving.
● Do not allow children to enter the lug-
gage compartment.
● Do not operate the rear seat if it is
occupied.
● Be careful not to get feet or hands
caught in the moving parts or joints of
the seats during operation.
● Do not allow children to operate the
seat.
A
145
3-3. Adjusting the seats
3
Before driving
■ Front seats
1
Up
Pull the head restraints up.
2 Down
Push the head restraint down while press-
ing the lock release button .
WARNING
■ After returning the rear seatback to
the upright position
Observe the following precautions.
Failure to do so may result in death or
serious injury.
● Make sure that the seatback is
securely locked in position by lightly
pushing it back and forth. If the seat-
back is not securely locked, the red
marking will be visible on the seatback
lock release lever. Make sure that the
red marking is not visible.
● Check that the seat belts are not
twisted or caught in the seatback.
Head restraints
Head restraints are provided for all
seats.
WARNING
■ Head restraint precautions
Observe the following precautions
regarding the head restraints.
Failure to do so may result in death or
serious injury.
● Use the head restraints designed for
each respective seat.
● Adjust the head restraints to the cor-
rect position at all times.
● After adjusting the head restraints,
push down on them and make sure
they are locked in position.
● Do not drive with the head restraints
removed.
Vertical adjustment
A
146
3-3. Adjusting the seats
■ Center rear seat
1 Up
Pull the head restraints up.
2 Down
Push the head restraint down while press-
ing the lock release button .
■ Outboard rear seats
1 To fold
Pull up the head restraint while pressing
the lock release button .
2 To use
Lift up and push down the head restraint to
the lowest lock position.
■ Adjusting the height of the head
restraints (front seats)
Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.
■ Adjusting the center rear seat head
restraint
Always raise the head restraint one level
from the stowed position when using.
The position of the head restraint for
the front seat can be adjusted forward
in 4 stages.
If the head restraint is pulled forward from
the foremost position, it will return to the
rearmost position.
Front and center rear seats
Pull the head restraint up while press-
ing the lock release button .
If the head restraint touches the ceiling,
making the removal difficult, change
the seat height or angle. (P.143)
A
A
Horizontal adjustment (if
equipped)
Removing the head restraints
147
3-3. Adjusting the seats
3
Before driving
Outboard rear seats
Pull the head restraint up while press-
ing the lock release buttons .
If the head restraint touches the ceiling,
making the removal difficult, change
the seat angle. (P.144)
Front and center rear seats
Align the head restraint with the instal-
lation holes and push it down to the
lock position.
Press and hold the lock release button
when lowering the head restraint.
Outboard rear seats
Align the head restraint with the instal-
lation holes and push it down to the
lowest lock position.
Installing the head restraints
A
A
148
3-4. Adjusting the steering wheel and mirrors
3-4.Adjusting the steering wheel an d mirrors
Manual type
1 Hold the steering wheel and push
the lever down.
2 Adjust to the ideal position by mov-
ing the steering wheel horizontally
and vertically.
After adjustment, pull the lever up to
secure the steering wheel.
Power type
Operating the switch moves the steer-
ing wheel in the following directions:
1 Up
2 Down
3 Toward the driver
4 Away from the driver
■ The steering wheel can be adjusted
when (power type)
The power switch is in ACC or ON
*
.
*
: If the driver’s seat belt is fastened, the
steering wheel can be adjusted regard-
less of power switch mode.
■ Automatic adjustment of the steering
position (if equipped)
A desired steering position can be entered
to memory and recalled automatically by
the driving position memory system.
(P.160)
■ Power easy access system (if equipped)
The steering wheel and driver’s seat move
in accordance with power switch mode and
the driver’s seat belt condition. (P.159)
■ After adjusting the steering wheel
(manual type)
Make sure that the steering wheel is
securely locked.
The horn may not sound if the steering
wheel is not securely locked.
■ Customization
The steering wheel movement can be
changed. (Customizable features:
P.464)
Steering wheel
Adjustment procedure
149
3-4. Adjusting the steering wheel and mirrors
3
Before driving
Press on or close to the mark.
The height of the rear view mirror can
be adjusted to suit your driving pos-
ture.
Adjust the height of the rear view mir-
ror by moving it up and down.
Manual anti-glare inside rear view
mirror
Reflected light from the headlights of
vehicles behind can be reduced by
operating the lever.
WARNING
■ Caution while driving
Do not adjust the steering wheel while
driving.
Doing so may cause the driver to mis-
handle the vehicle and cause an acci-
dent, resulting in death or serious injury.
■ After adjusting the steering wheel
(manual type)
Make sure that the steering wheel is
securely locked.
Otherwise, the steering wheel may move
suddenly, possibly causing an accident,
and resulting in death or serious injury.
Sounding the horn
Inside rear view mirror
The rear view mirror’s position can
be adjusted to enable sufficient
confirmation of the rear view.
Adjusting the height of rear view
mirror
WARNING
■ Caution while driving
Do not adjust the position of the mirror
while driving.
Doing so may lead to mishandling of the
vehicle and cause an accident, resulting
in death or serious injury.
Anti-glare function
150
3-4. Adjusting the steering wheel and mirrors
Normal position
Anti-glare position
Auto anti-glare inside rear view mir-
ror
Responding to the level of brightness
of the headlights of vehicles behind, the
reflected light is automatically
reduced.
■ To prevent sensor error (vehicles with
auto anti-glare inside rear view mirror)
To ensure that the sensors operate prop-
erly, do not touch or cover them.
■ When using the outside rear view mir-
rors in a cold weather
When it is cold and the outside rear view
mirrors are frozen, it may not be possible to
fold/extend them or adjust the mirror sur-
face. Remove the ice, snow, etc. covering
the outside rear view mirrors.
1 To select a mirror to adjust, press
the switch.
Manual retract
A
B
Outside rear view mirrors
The rear view mirror’s position can
be adjusted to enable sufficient
confirmation of the rear view.
WARNING
■ Important points while driving
Observe the following precautions while
driving.
Failing to do so may result in loss of con-
trol of the vehicle and cause an accident,
resulting in death or serious injury.
● Do not adjust the mirrors while driving.
● Do not drive with the mirrors folded.
● Both the driver and passenger side
mirrors must be extended and prop-
erly adjusted before driving.
Adjustment procedure
151
3-4. Adjusting the steering wheel and mirrors
3
Before driving
Left
Right
Automatic retract
The indicator comes on.
Left
Right
Pressing the same switch again will put the
switch in neutral.
2 To adjust the mirror, press the
switch.
Manual retract
Up
Left
Down
Right
Automatic retract
Up
Left
Down
Right
■ Mirror angle can be adjusted when
The power switch is in ACC or ON.
■ Defogging the mirrors
The outside rear view mirrors can be
cleared using the mirror defoggers. Turn on
the rear window defogger to turn on the
outside rear view mirror defoggers.
(P.308)
■ Auto anti-glare function (if equipped)
When the anti-glare inside rear view mirror
is set to automatic mode, the driver’s side
outside rear view mirror will activate in con-
junction with the anti-glare inside rear view
mirror to reduce reflected light. (P.149)
■ Automatic adjustment of the mirror
angle (vehicles with driving position
memory)
A desired mirror face angle can be entered
to memory and recalled automatically by
the driving position memory. (P.159)
A
B
A
B
A
B
C
D
WARNING
■ When the mirror defoggers are oper-
ating
Do not touch the rear view mirror sur-
faces, as they can become very hot and
burn you.
A
B
C
D
152
3-4. Adjusting the steering wheel and mirrors
■ Using the switch
Manual retract
Push the mirror back in the direction of the
vehicle’s rear.
Automatic retract
Press the switch to fold the mirrors.
Press it again to extend them to the
original position.
■ Setting automatic mode
Automatic mode allows the folding or
extending of the mirrors to be linked to
locking/unlocking of the doors.
Press the “AUTO” switch to set auto-
matic mode.
The indicator will come on.
Pressing the switch again will return to
manual mode.
■ When disconnecting and reconnecting
12-volt battery terminals
The automatic folding/extending mirror
function will return to off as default. To turn
the function on, press the switch again to
select on.
■ Customization
The automatic mirror folding and extending
operation can be changed. (Customizable
features: P.464)
When the mirror select switch is in the
“L” or “R” position, the outside rear
view mirrors will automatically angle
downwards when the vehicle is revers-
ing in order to give a better view of the
ground.
To disable this function, move the mir-
ror select switch to the neutral position
(between “L” and “R”)
Folding and extending the mir-
rors
A
WARNING
■ When a mirror is moving
To avoid personal injury and mirror mal-
function, be careful not to get your hand
caught by the moving mirror.
Linked mirror function when
reversing (vehicles with driving
position memory)
153
3-4. Adjusting the steering wheel and mirrors
3
Before driving
■ Adjusting the mirror angle when
the vehicle is reversing
With the shift lever in R, adjust the mir-
ror angle at a desired position.
The adjusted angle will be memorized
and the mirror will automatically tilt to
the memorized angle whenever the
shift lever is shifted to R from next time.
The memorized downward tilt position of
the mirror is linked to the normal position
(angle adjusted with the shift lever in other
than R). Therefore, if the normal position is
changed after adjustment, the tilt position
will also change.
When the normal position is changed,
readjust the angle in reversing.
154
3-5. Opening, closing the windows and moon roof
3-5.Opening, closing the wind ows and moon roof
The power windows can be opened
and closed using the switches.
1 Closing
2 One-touch closing
*
3 Opening
4 One-touch opening
*
*
: To stop the window partway, operate
the switch in the opposite direction.
■ The power windows can be operated
when
The power switch is in ON.
■ Operating the power windows after
turning the hybrid system off
The power windows can be operated for
approximately 45 seconds even after the
power switch is turned to ACC or OFF.
They cannot, however, be operated once
either front door is opened.
■ Jam protection function
If an object becomes jammed between the
window and the window frame while the
window is closing, window movement is
stopped and the window is opened slightly.
■ Catch protection function
If an object becomes caught between the
door and window while the window is open-
ing, window movement is stopped.
■ When the window cannot be opened or
closed
When the jam protection function or catch
protection function operates unusually and
the side window cannot be opened or
closed, perform the following operations
with the power window switch of that door.
● Stop the vehicle. With the power switch
in ON, within 4 seconds of the jam pro-
tection function or catch protection func-
tion activating, continuously operate the
power window switch in the one-touch
closing direction or one-touch opening
direction so that the side window can be
opened and closed.
● If the side window cannot be opened and
closed even when performing the above
operations, perform the following proce-
dure for function initialization.
1 Turn the power switch to ON.
2 Pull and hold the power window switch
in the one-touch closing direction and
completely close the side window.
3 Release the power window switch for a
moment, resume pulling the switch in
the one-touch closing direction, and
hold it there for approximately 6 sec-
onds or more.
4 Press and hold the power window
switch in the one-touch opening direc-
tion. After the side window is com-
pletely opened, continue holding the
switch for an additional 1 second or
more.
5 Release the power window switch for a
moment, resume pushing the switch in
the one-touch opening direction, and
hold it there for approximately 4 sec-
onds or more.
6 Pull and hold the power window switch
in the one-touch closing direction
again. After the side window is com-
pletely closed, continue holding the
switch for a further 1 second or more.
If you release the switch while the window is
moving, start again from the beginning.
If the window reverses and cannot be fully
closed or opened, have the vehicle
inspected by your Lexus dealer.
Power windows
Opening and closing the power
windows
155
3-5. Opening, closing the windows and moon roof
3
Before driving
■ Door lock linked window operation
● The power windows can be opened and
closed using the mechanical key.
*
(P.430)
● The power windows can be opened using
the wireless remote control.
*
(P.120)
*
: These settings must be customized at
your Lexus dealer.
■ Power windows open warning buzzer
The buzzer sounds and “Window Open” is
shown on the multi-information display in
the instrument cluster when the power
switch is turned off and the driver’s door is
opened with the power windows open.
■ Customization
Setting (e.g. linked door lock operation)
can be changed.
(Customizable features: P.465)
This function is designed to prevent
children from accidentally opening or
closing a passenger window.
Press the switch.
WARNING
Observe the following precautions.
Failing to do so may result in death or
serious injury.
■ Closing the windows
● The driver is responsible for all the
power window operations, including
the operation for the passengers. In
order to prevent accidental operation,
especially by a child, do not let a child
operate the power windows. It is possi-
ble for children and other passengers
to have body parts caught in the power
window. Also, when riding with a child,
it is recommended to use the window
lock switch. (P.155)
● Check to make sure that all passen-
gers do not have any part of their body
in a position where it could be caught
when a window is being operated.
● When using the wireless remote con-
trol or mechanical key and operating
the power windows, operate the
power window after checking to make
sure that there is no possibility of any
passenger having any of their body
parts caught in the window. Also do
not let a child operate window by the
wireless remote control or mechanical
key. It is possible for children and other
passengers to get caught in the power
window.
● When exiting the vehicle, turn the
power switch off, carry the key and exit
the vehicle along with the child. There
may be accidental operation, due to
mischief, etc., that may possibly lead to
an accident.
■ Jam protection function
● Never use any part of your body to
intentionally activate the jam protec-
tion function.
● The jam protection function may not
work if something gets jammed just
before the window is fully closed. Be
careful not to get any part of your body
jammed in the window.
■ Catch protection function
● Never use any part of your body or
clothing to intentionally activate the
catch protection function.
● The catch protection function may not
work if something gets caught just
before the window is fully opened. Be
careful not to get any part of your body
or clothing caught in the window.
Preventing accidental opera-
tion (window lock switch)
156
3-5. Opening, closing the windows and moon roof
The indicator will come on and the
passenger window will be locked.
■ The power windows can be operated
when
The power switch is in ON.
■ When the 12-volt battery is discon-
nected
The window lock switch is disabled. If nec-
essary, press the window lock switch after
reconnecting the 12-volt battery.
*
: If equipped
■ Opening and closing
1 Opens the moon roof
*
The moon roof tilts up and then fully opens.
2 Closes the moon roof
*
*
: Lightly press either side of the moon roof
switch to stop the moon roof partway.
■ Tilting up and down
1 Tilts the moon roof up
*
2 Tilts the moon roof down
*
*
: Lightly press either side of the moon roof
switch to stop the moon roof partway.
A
Moon roof
*
Use the overhead switches to open
and close the moon roof and tilt it
up and down.
Operating the moon roof
157
3-5. Opening, closing the windows and moon roof
3
Before driving
■ The moon roof can be operated when
The power switch is in ON.
■ Operating the moon roof after turning
the hybrid system off
The moon roof can be operated for approx-
imately 45 seconds after the power switch
is turned to ACC or OFF. It cannot, how-
ever, be operated once either front door is
opened.
■ Jam protection function
If an object is detected between the moon
roof and the frame while the moon roof is
closing or tilting down, travel is stopped and
the moon roof opens slightly.
■ Sunshade
The sunshade can be opened and closed
manually. However, the sunshade will open
automatically when the moon roof is
opened.
■ Door lock linked moon roof operation
● The moon roof can be opened and
closed using the mechanical key.
*
(P.430)
● The moon roof can be opened using the
wireless remote control.
*
(P.120)
*
: These settings must be customized at
your Lexus dealer.
■ When the moon roof does not close nor-
mally
Perform the following procedure:
1
Stop the vehicle.
2
Press and hold the “CLOSE” switch.
*
The moon roof will close, reopen and pause
for approximately 10 seconds. Then it will
close again and stop at the completely
closed position.
3
Check to make sure that the moon roof
is completely closed and then release
the switch.
*
: If the switch is released at the incorrect
time, the procedure will have to be per-
formed again from the beginning.
If the moon roof does not fully close even
after performing the above procedure cor-
rectly, have the vehicle inspected by your
Lexus dealer.
■ If the moon roof does not move normally
If the moon roof does not open or close
normally or the automatic opening function
does not operate, perform the following ini-
tialization procedure.
1
Stop the vehicle.
2
Press and hold the “DOWN” switch.
*
The moon roof will stop at the tilt-up posi-
tion. After that, it will open, close, tilt up, tilt
down, and stop at the fully closed position.
3
Confirm that the moon roof has com-
pletely stopped and release the switch.
*
: If you release the switch while the moon
roof is moving, perform the procedure
again from the beginning.
If, after performing the above procedures
correctly, the moon roof still does not open
or close normally or the automatic opening
function does not operate, have the vehicle
inspected by your Lexus dealer.
■ Moon roof open warning buzzer
The buzzer sounds and “Moon Roof Open”
is shown on the multi-information display in
the instrument cluster when the power
switch is turned off and the driver’s door is
opened with the moon roof open.
■ Customization
Some functions can be customized.
(P.465)
WARNING
Observe the following precautions.
Failure to do so may cause death or seri-
ous injury.
■ Opening the moon roof
● Do not allow any passengers to put
their hands or heads outside the vehi-
cle while it is moving.
● Do not sit on top of the moon roof.
158
3-5. Opening, closing the windows and moon roof
WARNING
■ Opening and closing the moon roof
● The driver is responsible for moon roof
opening and closing operations.
In order to prevent accidental opera-
tion, especially by a child, do not let a
child operate the moon roof. It is possi-
ble for children and other passengers
to have body parts caught in the moon
roof.
● Check to make sure that all passen-
gers do not have any part of their body
in a position where it could be caught
when the moon roof is being operated.
● When using the wireless remote con-
trol or mechanical key and operating
the moon roof, operate the moon roof
after checking to make sure that there
is no possibility of any passenger hav-
ing any of their body parts caught in
the moon roof. Also, do not let a child
operate moon roof by the wireless
remote control or mechanical key. It is
possible for children and other pas-
sengers to get caught in the moon
roof.
● When exiting the vehicle, turn the
power switch off, carry the key and exit
the vehicle along with the child. There
may be accidental operation, due to
mischief, etc., that may possibly lead to
an accident.
■ Jam protection function
● Never use any part of your body to
intentionally activate the jam protec-
tion function.
● The jam protection function may not
work if something gets caught just
before the moon roof is fully closed.
Also, the jam protection function is not
designed to operate while the moon
roof switch is being pressed. Take care
so that your fingers, etc. do not get
caught.
159
3-6. Favorite settings
3
Before driving
3-6.Favorite settings
*
: If equipped
When all of the following have been
performed, the driver’s seat and steer-
ing wheel are automatically adjusted to
a position that allows the driver to
enter and exit the vehicle easily.
The shift lever has been shifted to P.
The power switch has been turned
off.
The driver’s seat belt has been
unfastened.
When any of the following has been
performed, the driver’s seat and steer-
ing wheel automatically return to their
original positions.
The power switch has been turned
to ACC or ON.
The driver’s seat belt has been fas-
tened.
■ Operation of the power easy access
system
When exiting the vehicle, the power easy
access system may not operate if the seat is
already close to the rearmost position, etc.
■ Jam protection function
While the power easy access system is
operating, if an object is stuck behind the
front seat, the front seat will stop and then
slightly move forward. When the jam pro-
tection function operates, the seat stops at a
position other than the set seat position.
Check the seat position.
■ Customization
Some functions can be customized. (Cus-
tomizable features: P.464)
Driving position memory
*
This feature automatically adjusts
the positions of the driver’s seat,
steering wheel, outside rear view
mirrors and head-up display (if
equipped) to make entering and
exiting the vehicle easier or to suit
your preferences.
When My Settings is turned on:
Up to 3 different driving positions
can be recorded for each the driver
and guest that have been regis-
tered for My Settings.
When electronic key assignment is
registered for My Settings, the
driving position for each driver can
be recalled (memory recall func-
tion).
When My Settings is turned off:
Up to 3 different driving positions
can be recorded.
Each electronic key can be regis-
tered to recall your preferred driv-
ing position (memory recall
function).
For details about My Settings, refer
to P.163.
Enabling easier driver entry and
exit (power easy access system)
160
3-6. Favorite settings
1 Check that the shift position is in P.
2
Turn the power switch to ON.
3
Adjust the driver’s seat, steering
wheel, outside rear view mirrors
and head-up display (if equipped)
to the desired positions.
4
While pressing the “SET” button, or
within 3 seconds after the “SET”
button is pressed, press button “1”,
“2” or “3” until the buzzer sounds.
If the selected button has already been
preset, the previously recorded position
will be overwritten.
■ Seat positions that can be memorized
(P.143)
The adjusted positions other than the posi-
tion adjusted by lumbar support switch can
be recorded.
■ In order to correctly use the driving
position memory function
If a seat position is already in the furthest
possible position and the seat is operated in
the same direction, the recorded position
may be slightly different when it is recalled.
1 Check that the shift position is in P.
2
Turn the power switch to ON.
3
Press one of the buttons for the
driving position you want to recall
until the buzzer sounds.
■ To stop the position recall operation
part-way through
Perform any of the following:
● Press the “SET” button.
● Press button “1”, “2” or “3”.
● Operate any of the seat adjustment
switches (only cancels seat position
recall).
● Operate the tilt and telescopic steering
control switch (only cancels steering
wheel position recall).
■ Jam protection function
While the driving position is recalled or the
power easy access system is operating, if an
object is stuck behind the front seat, the
WARNING
■ While the power easy access system
is operating and the steering wheel
and seat is moving
Be careful not to get body parts or lug-
gage caught. Failure to do so may cause
an injury or damage to the luggage.
Recording a driving position into
memory
WARNING
■ Seat adjustment caution
Take care during seat adjustment so that
the seat does not strike the rear passen-
ger or squeeze your body against the
steering wheel.
Recalling a driving position
161
3-6. Favorite settings
3
Before driving
front seat will stop and then slightly move
forward. When the jam protection function
operates, the seat stops at a position other
than the set seat position. Check the seat
position.
■ Operating the driving position memory
after turning the power switch off
Recorded seat positions can be activated
up to 180 seconds after the driver’s door is
opened and another 60 seconds after it is
closed again.
■ When the recorded seat position can-
not be recalled
The seat position may not be recalled in
some situations when the seat position is
recorded in a certain range. For details,
contact your Lexus dealer.
■ When the recorded seat position can-
not be recalled
The seat position may not be recalled in
some situations when the seat position is
recorded in a certain range. For details,
contact your Lexus dealer.
■ When My Settings is turned on (an
individual is identified with an elec-
tronic key):
The driving positions can be automati-
cally recalled for each registered
driver by registering electronic key
assignments in My Settings.
Driving position registration proce-
dure
When the shift position is shifted to P after
driving the vehicle, the current driving
position will be recorded.
Driving position recall procedure
1 Carry only the key that has been
assigned and registered in My Set-
tings, and then unlock and open the
driver’s door using the smart
access system with push-button
start or wireless remote control.
The driving position other than the steering
wheel and head-up display (if equipped)
will move to the recorded position. How-
ever, the seat will move to a position
slightly behind the recorded position in
order to make entering the vehicle easier.
If the driving position is in a position that
has already been recorded, the driving
position will not move.
2 Turn the power switch to ACC or
ON.
The seat, steering wheel and head-up dis-
play (if equipped) (only when the power
switch is in ON) will move to the recorded
position.
Memory recall function cancelation
procedure
Initialize the driver registered settings in
My Settings.
For information on initializing driver regis-
tered settings, refer to the “MULTIMEDIA
OWNER’S MANUAL”.
■ When My Settings is turned off:
Each electronic key can be registered
to automatically recall your preferred
driving position.
Driving position registration proce-
dure
Record your driving position to button “1”,
“2” or “3” before performing the following:
Carry only the key you want to register,
and then close the driver’s door.
If 2 or more keys are in the vehicle, the
driving position cannot be recorded prop-
erly.
1 Check that the shift position is in P.
2 Turn the power switch to ON.
Recalling a driving position auto-
matically when getting in the
vehicle (memory recall function)
162
3-6. Favorite settings
3 Recall the driving position that you
want to record.
4 While pressing the recalled button,
press and hold the door lock switch
(either lock or unlock) until the
buzzer sounds.
If the button could not be registered, the
buzzer sounds continuously for approxi-
mately 3 seconds.
Driving position recall procedure
1 Carry the electronic key that has
been registered to the driving posi-
tion, and then unlock and open the
driver’s door using the smart
access system with push-button
start or wireless remote control.
The driving position other than the steering
wheel and head-up display (if equipped)
will move to the recorded position. How-
ever, the seat will move to a position
slightly behind the recorded position in
order to make entering the vehicle easier.
If the driving position is in a position that
has already been recorded, the driving
position will not move.
2 Turn the power switch to ACC or
ON, or fasten a seat belt.
The seat, steering wheel and head-up dis-
play (if equipped) (only when the power
switch is in ON) will move to the recorded
position.
Memory recall function cancelation
procedure
Carry only the key you want to cancel and
then close the driver’s door.
If 2 or more keys are in the vehicle, the
driving position cannot be canceled prop-
erly.
1 Turn the power switch to ON.
2 While pressing the “SET” button,
press and hold the door lock switch
(either lock or unlock) until the
buzzer sounds twice.
If the button could not be canceled, the
buzzer sounds continuously for approxi-
mately 3 seconds.
■ Recalling the driving position using the
memory recall function
● Different driving positions can be regis-
tered for each electronic key. Therefore,
the driving position that is recalled may
be different depending on the key being
carried.
● If a door other than the driver’s door is
unlocked with the smart access system
with push-button start, the driving posi-
tion cannot be recalled. In this case, press
the driving position button which has
been set.
■ Jam protection function
While the driving position is recalled or the
power easy access system is operating, if an
object is stuck behind the front seat, the
front seat will stop and then slightly move
forward. When the jam protection function
operates, the seat stops at a position other
than the set seat position. Check the seat
position.
■ Customization
Some functions can be customized.:
P.464
163
3-6. Favorite settings
3
Before driving
An individual can be identified using
the following authentication devices.
Electronic key
An individual is identified when the smart
access system with push-button start
detects their electronic key. (P.114)
Bluetooth
®
devices
An individual can be identified if the same
Bluetooth
®
device that was used as a
hands-free phone the last time the vehicle
was entered is connected to the multime-
dia system.
If an individual is identified by detecting an
electronic key, identification by
Bluetooth
®
device will not be performed.
Bluetooth
®
is a registered trademark
of Bluetooth SIG, Inc.
When an individual is identified from
an authentication device, settings for
the following functions are recalled.
Driving position (memory recall
function)
After an individual is identified, the driving
position that was set when driving was last
completed is recalled when either of the
following operations is performed.
The door is unlocked and opened using the
access system with push-button start or
wireless remote control.
Meter displays, head-up display
*1
and multimedia information
*2
When an individual is identified, the display
settings used when the power switch was
last turned off are recalled.
Vehicle settings that can be set
using the Center display
*2
When an individual is identified, the vehicle
settings used when the power switch was
last turned off are recalled.
Safe driving support function
*2
When an individual is identified, the vehicle
settings used when the power switch was
last turned off are recalled.
*1
: If equipped
*2
: Some settings are excluded
My Settings
Drivers are identified using devices
such as electronic keys to store the
driving position and vehicle settings
for each. Then the information can
be recalled the next time the vehi-
cle is driven.
Authentication devices can be
assigned in advance to drivers so
that they can drive using their pre-
ferred settings.
Settings for 3 drivers can be stored
in My Settings.
For details on how to assign/delete
electronic keys, set driver names,
perform initialization, change driv-
ers manually, or delete a driver,
refer to the “MULTIMEDIA
OWNER’SMANUAL”.
Types of assigned authentica-
tion devices
Recalled functions
164
3-6. Favorite settings

Related Topics

Popular Owner Manuals