2019-2026 Lexus UX SUV Driving User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving for Your Lexus UX SUV First Generation (2019-2026)

165Driving44-1. Before drivingPCS (Pre-Collision System) ..221Driving the vehicle..................... 166LTA (Lane Tracing Assist) ..... 231Cargo and luggage................... 172LDA (Lane Departure Alert)235Vehicle load limits...................... 174PDA (Proactive driving assist).........................................................241Trailer towing............................... 175RSA (Road Sign Assist).......... 246Dinghy towing ............................. 175Dynamic radar cruise control4-2. Driving procedures....................................................... 249Power (ignition) switch ............ 177Cruise control ............................ 259EV drive mode ............................182Emergency Driving Stop System4Hybrid transmission ..................184....................................................... 262Turn signal lever........................... 191BSM (Blind Spot Monitor).... 264DrivingParking brake .............................. 192Safe Exit Assist........................... 269Brake Hold.................................... 194Intuitive parking assist..............272ASC (Active Sound Control)196RCTA (Rear Cross Traffic Alert)4-3. Operating the lights and wipersfunction....................................... 278Headlight switch.........................198PKSB (Parking Support Brake)....................................................... 282AHB (Automatic High Beam).........................................................201Parking Support Brake function(static objects front and rear ofFog light switch ..........................204the vehicle) ............................... 286Windshield wipers and washerParking Support Brake function........................................................205(moving vehicles rear of theRear window wiper and washervehicle)....................................... 289........................................................209Driving mode select switch .. 2904-4. RefuelingDriving assist systems......
165
Driving
4
4-1. Before driving
PCS (Pre-Collision System) ..221
Driving the vehicle..................... 166
LTA (Lane Tracing Assist) ..... 231
Cargo and luggage................... 172
LDA (Lane Departure Alert)235
Vehicle load limits...................... 174
PDA (Proactive driving assist)
.........................................................241
Trailer towing............................... 175
RSA (Road Sign Assist).......... 246
Dinghy towing ............................. 175
Dynamic radar cruise control
4-2. Driving procedures
....................................................... 249
Power (ignition) switch ............ 177
Cruise control ............................ 259
EV drive mode ............................182
Emergency Driving Stop System
4
Hybrid transmission ..................184
....................................................... 262
Turn signal lever........................... 191
BSM (Blind Spot Monitor).... 264
Driving
Parking brake .............................. 192
Safe Exit Assist........................... 269
Brake Hold.................................... 194
Intuitive parking assist..............272
ASC (Active Sound Control)196
RCTA (Rear Cross Traffic Alert)
4-3. Operating the lights and wipers
function....................................... 278
Headlight switch.........................198
PKSB (Parking Support Brake)
....................................................... 282
AHB (Automatic High Beam)
.........................................................201
Parking Support Brake function
(static objects front and rear of
Fog light switch ..........................204
the vehicle) ............................... 286
Windshield wipers and washer
Parking Support Brake function
........................................................205
(moving vehicles rear of the
Rear window wiper and washer
vehicle)....................................... 289
........................................................209
Driving mode select switch .. 290
4-4. Refueling
Driving assist systems.............. 292
Opening the fuel tank cap....... 211
4-6. Driving tips
4-5. Using the driving support sys-
Hybrid Electric Vehicle driving
tems
tips ................................................ 298
Lexus Safety System +3 software
Winter driving tips....................300
update.......................................... 213
Utility vehicle precautions..... 302
Lexus Safety System +3 .......... 215
1664-1. Before driving5 Slowly release the brake pedal.4-1.Before drivingDriving the vehicle6 Lock the door, making sure thatyou have the electronic key on yourThe specified procedures should to ensure safe driving:If parking on a hill, block the wheels procedure■ Starting off on a steep uphill1 Firmly depress the brake pedal and■ Starting the hybrid systemshift the shift position to D.P.177The hill-start assist control will be activated.■ Driving2 Set the parking brake. (P.192)1 With the brake pedal depressed,3 Release the brake pedal and gentlyshift the shift position to the accelerator pedal toCheck that the shift position indicatoraccelerate the D.2 If the parking brake is set, release4 Release the parking parking brake. (P.192)(P.192)3 Gradually release the brake pedal■ When starting off on a uphilland gently depress the acceleratorThe hill-start assist control will be to accelerate the vehicle.(P.293)■ Stopping■ For fuel-efficient driving1 Depress the brake in mind that Hybrid Electric Vehicles2 If necessary, set the parking similar to conventional vehicles, and it isnecessary to refrain from activities such asIf the vehicle is to be stopped for ansudden acceleration. (P.298)extended period of time, shift the shift posi-■ Driving in the raintion to P. (P.185)● Drive carefully when it is raining, because■ Parking the vehiclevisibility will be reduced, the windows1 Depress the brake pedal to stopmay become fogged-up, and the roadwill be vehicle completely.● Drive carefully when it starts to rain,2 If the parking brake is released, setbecause the road surface will be espe-the parking brake (P.192).cially slippery.● Refrain from high speeds when driving on3 Shift the shift position to expressway in the rain, because there(P.185)may be a layer of water between the tiresand the road surface, preventing theCheck that the shift position
166
4-1. Before driving
5 Slowly release the brake pedal.
4-1.Before driving
Driving the vehicle
6 Lock the door, making sure that
you have the electronic key on your
The specified procedures should be
person.
observed to ensure safe driving:
If parking on a hill, block the wheels as
needed.
Driving procedure
■ Starting off on a steep uphill
1 Firmly depress the brake pedal and
■ Starting the hybrid system
shift the shift position to D.
P.177
The hill-start assist control will be activated.
■ Driving
2 Set the parking brake. (P.192)
1 With the brake pedal depressed,
3 Release the brake pedal and gently
shift the shift position to D.
depress the accelerator pedal to
Check that the shift position indicator
accelerate the vehicle.
shows D.
2 If the parking brake is set, release
4 Release the parking brake.
the parking brake. (P.192)
(P.192)
3 Gradually release the brake pedal
■ When starting off on a uphill
and gently depress the accelerator
The hill-start assist control will be activated.
pedal to accelerate the vehicle.
(P.293)
■ Stopping
■ For fuel-efficient driving
1 Depress the brake pedal.
Keep in mind that Hybrid Electric Vehicles
2 If necessary, set the parking brake.
are similar to conventional vehicles, and it is
necessary to refrain from activities such as
If the vehicle is to be stopped for an
sudden acceleration. (P.298)
extended period of time, shift the shift posi-
■ Driving in the rain
tion to P. (P.185)
● Drive carefully when it is raining, because
■ Parking the vehicle
visibility will be reduced, the windows
1 Depress the brake pedal to stop
may become fogged-up, and the road
will be slippery.
the vehicle completely.
● Drive carefully when it starts to rain,
2 If the parking brake is released, set
because the road surface will be espe-
the parking brake (P.192).
cially slippery.
● Refrain from high speeds when driving on
3 Shift the shift position to P.
an expressway in the rain, because there
(P.185)
may be a layer of water between the tires
and the road surface, preventing the
Check that the shift position indicator
steering and brakes from operating
shows P and the parking brake indicator is
properly.
illuminated.
■ Restraining the hybrid system output
4 Press the power switch to stop the
(Brake Override System)
hybrid system.
● When the accelerator and brake pedals
1674-1. Before drivingare depressed at the same time, the■ When driving the vehiclehybrid system output may be restrained.● Do not drive if you are unfamiliar with● A warning message is displayed on thethe location of the brake and accelera-multi-information display while the sys-tor pedals to avoid depressing thetem is pedal.■ Breaking in your new Lexus• Accidentally depressing the accelera-tor pedal instead of the brake pedalTo extend the life of the vehicle, observingwill result in sudden acceleration thatthe following precautions is recommended:may lead to an accident.● For the first 200 miles (300 km):• When backing up, you may twist yourAvoid sudden around, leading to difficulty in● For the first 1000 miles (1600 km):operating the pedals. Make sure to• Do not drive at extremely high the pedals properly.• Avoid sudden acceleration.• Make sure to keep a correct driving• Do not drive continuously in low even when moving the vehicle• Do not drive at a constant speed foronly slightly. This allows you to depressextended brake and accelerator pedals■ Operating your vehicle in a • Depress the brake pedal using your4Comply with the relevant vehicle registra-right foot. Depressing the brake pedaltion laws and confirm the availability of theusing your left foot may delaycorrect fuel. (P.443)Drivingresponse in an emergency, resulting inan ● The driver should pay extra attentionObserve the following pedestrians when the vehicle isFailure to do so may result in death orpowered only by the electric motorserious injury.(traction motor). As there is no enginenoise, the pedestrians may misjudge■ When starting the vehiclethe vehicle’s movement. Even thoughthe vehicle is equipped with theAlways keep your foot on the brakeAcoustic Vehicle Alerting System,pedal while stopped with the “READY”drive with care as pedestrians in theindicator is illuminated. This pre
167
4-1. Before driving
are depressed at the same time, the
■ When driving the vehicle
hybrid system output may be restrained.
● Do not drive if you are unfamiliar with
● A warning message is displayed on the
the location of the brake and accelera-
multi-information display while the sys-
tor pedals to avoid depressing the
tem is operating.
wrong pedal.
■ Breaking in your new Lexus
• Accidentally depressing the accelera-
tor pedal instead of the brake pedal
To extend the life of the vehicle, observing
will result in sudden acceleration that
the following precautions is recommended:
may lead to an accident.
● For the first 200 miles (300 km):
• When backing up, you may twist your
Avoid sudden stops.
body around, leading to difficulty in
● For the first 1000 miles (1600 km):
operating the pedals. Make sure to
• Do not drive at extremely high speeds.
operate the pedals properly.
• Avoid sudden acceleration.
• Make sure to keep a correct driving
• Do not drive continuously in low gears.
posture even when moving the vehicle
• Do not drive at a constant speed for
only slightly. This allows you to depress
extended periods.
the brake and accelerator pedals
■ Operating your vehicle in a foreign
properly.
country
• Depress the brake pedal using your
4
Comply with the relevant vehicle registra-
right foot. Depressing the brake pedal
tion laws and confirm the availability of the
using your left foot may delay
correct fuel. (P.443)
Driving
response in an emergency, resulting in
an accident.
WARNING
● The driver should pay extra attention
Observe the following precautions.
to pedestrians when the vehicle is
Failure to do so may result in death or
powered only by the electric motor
serious injury.
(traction motor). As there is no engine
noise, the pedestrians may misjudge
■ When starting the vehicle
the vehicle’s movement. Even though
the vehicle is equipped with the
Always keep your foot on the brake
Acoustic Vehicle Alerting System,
pedal while stopped with the “READY”
drive with care as pedestrians in the
indicator is illuminated. This prevents the
vicinity may still not notice the vehicle if
vehicle from creeping.
the surrounding area is noisy.
● Do not drive the vehicle over or stop
the vehicle near flammable materials.
The exhaust system and exhaust gases
can be extremely hot. These hot parts
may cause a fire if there is any flamma-
ble material nearby.
1684-1. Before driving● Do not drive in excess of the speedWARNINGlimit. Even if the legal speed limit per-● During normal driving, do not turn offmits it, do not drive over 85 mph (140the hybrid system. Turning the hybridkm/h) unless your vehicle has high-system off while driving will not causespeed capability of steering or braking over 85 mph (140 km/h) mayHowever, power assist for the steeringresult in tire failure, loss of control andwheel may be lost making it difficult topossible injury. Be sure to consult a tiresteer smoothly before stopping thedealer to determine whether the tiresvehicle depending on the remainingon your vehicle are high-speed capa-charge in the 12-volt battery or usagebility tires or not before driving at suchconditions. In this situation, you over and stop the vehicle as soonas it is safe to do so.■ When driving on slippery road sur-In the event of an emergency, such asfacesif it becomes impossible to stop the● Sudden braking, acceleration andvehicle in the normal way: P.402steering may cause tire slippage andreduce your ability to control the vehi-● Use engine braking (downshift) a safe speed when drivingdown a steep hill.● Sudden acceleration, engine brakingUsing the brakes continuously maydue to shifting, or changes in enginecause the brakes to overheat and losespeed could cause the vehicle to skid,effectiveness. (P.184)resulting in an accident.● Do not adjust the positions of the● After driving through a puddle, lightlysteering wheel, the seat, or the insidedepress the brake pedal to make sureor outside rear view mirrors while driv-that the brakes are functioning . Wet brake pads may prevent theDoing so may result in a loss of vehiclebrakes from functioning properly. brakes on only one side are wetand not functioning properly, steering● Always check that all passengers’control may be , heads or other parts of theirbody are not outside
168
4-1. Before driving
● Do not drive in excess of the speed
WARNING
limit. Even if the legal speed limit per-
● During normal driving, do not turn off
mits it, do not drive over 85 mph (140
the hybrid system. Turning the hybrid
km/h) unless your vehicle has high-
system off while driving will not cause
speed capability tires.
loss of steering or braking control.
Driving over 85 mph (140 km/h) may
However, power assist for the steering
result in tire failure, loss of control and
wheel may be lost making it difficult to
possible injury. Be sure to consult a tire
steer smoothly before stopping the
dealer to determine whether the tires
vehicle depending on the remaining
on your vehicle are high-speed capa-
charge in the 12-volt battery or usage
bility tires or not before driving at such
conditions. In this situation, you should
speeds.
pull over and stop the vehicle as soon
as it is safe to do so.
■ When driving on slippery road sur-
In the event of an emergency, such as
faces
if it becomes impossible to stop the
● Sudden braking, acceleration and
vehicle in the normal way: P.402
steering may cause tire slippage and
reduce your ability to control the vehi-
● Use engine braking (downshift) to
cle.
maintain a safe speed when driving
down a steep hill.
● Sudden acceleration, engine braking
Using the brakes continuously may
due to shifting, or changes in engine
cause the brakes to overheat and lose
speed could cause the vehicle to skid,
effectiveness. (P.184)
resulting in an accident.
● Do not adjust the positions of the
● After driving through a puddle, lightly
steering wheel, the seat, or the inside
depress the brake pedal to make sure
or outside rear view mirrors while driv-
that the brakes are functioning prop-
ing.
erly. Wet brake pads may prevent the
Doing so may result in a loss of vehicle
brakes from functioning properly. If
control.
the brakes on only one side are wet
and not functioning properly, steering
● Always check that all passengers’
control may be affected.
arms, heads or other parts of their
body are not outside the vehicle.
■ When shifting the shift position
● AWD models: Do not drive the vehicle
● Do not let the vehicle roll backward
off-road.
while a forward driving position is
This is not an AWD vehicle designed
selected, or roll forward while the shift
for off-road driving. Proceed with all
position is in R.
due caution if it becomes unavoidable
Doing so may result in an accident or
to drive off-road.
damage to the vehicle.
● Do not drive across a river or through
● Do not shift the shift position to P while
other bodies of water.
the vehicle is moving.
This may cause electric/electronic
Doing so can damage the hybrid
components to short circuit, damage
transmission and may result in a loss of
the hybrid system or cause other seri-
vehicle control.
ous damage to the vehicle.
● Do not shift the shift position to R while
the vehicle is moving forward.
Doing so can damage the hybrid
transmission and may result in a loss of
vehicle control.
1694-1. Before driving● If the vehicle is stopped on an incline,WARNINGin order to prevent accidents caused● Do not shift the shift position to a driv-by the vehicle rolling forward or back-ing position while the vehicle is movingward, always depress the brake securely apply the parking brakeDoing so can damage the hybridas and may result in a loss ofvehicle control.● Avoid revving or racing the the engine at high speed● Changing the shift position to N whilewhile the vehicle is stopped may causethe vehicle is moving will disengagethe exhaust system to overheat, whichthe hybrid system. Regenerative brak-could result in a fire if combustibleing is not available with the hybrid sys-material is disengaged.■ When the vehicle is parked● Be careful not to change the shift posi-● Do not leave glasses, cigarette light-tion with the accelerator pedalers, spray cans, or soft drink cans in when it is in the the shift position to anyDoing so may result in the following:position other than P or N may lead tounexpected rapid acceleration of the• Gas may leak from a cigarette lighter4vehicle that may cause an accidentor spray can, and may lead to a result in death or serious injury.• The temperature inside the vehicleAfter changing the shift position, makemay cause the plastic lenses and plas-Drivingsure to confirm the current shift posi-tic material of glasses to deform ortion displayed on the shift position inside the meter.• Soft drink cans may fracture, causing■ If you hear a squealing or scrapingthe contents to spray over the interiornoise (brake pad wear limit indica-of the vehicle, and may also cause ators)short circuit in the vehicle’s the brake pads checked andreplaced by your Lexus dealer as soon as● Do not leave cigarette lighters in thepossible. Rotor damage may result if thevehicle. If a cigarette lighter is in apads are
169
4-1. Before driving
● If the vehicle is stopped on an incline,
WARNING
in order to prevent accidents caused
● Do not shift the shift position to a driv-
by the vehicle rolling forward or back-
ing position while the vehicle is moving
ward, always depress the brake pedal
backward.
and securely apply the parking brake
Doing so can damage the hybrid
as needed.
transmission and may result in a loss of
vehicle control.
● Avoid revving or racing the engine.
Running the engine at high speed
● Changing the shift position to N while
while the vehicle is stopped may cause
the vehicle is moving will disengage
the exhaust system to overheat, which
the hybrid system. Regenerative brak-
could result in a fire if combustible
ing is not available with the hybrid sys-
material is nearby.
tem disengaged.
■ When the vehicle is parked
● Be careful not to change the shift posi-
● Do not leave glasses, cigarette light-
tion with the accelerator pedal
ers, spray cans, or soft drink cans in the
depressed.
vehicle when it is in the sun.
Changing the shift position to any
Doing so may result in the following:
position other than P or N may lead to
unexpected rapid acceleration of the
• Gas may leak from a cigarette lighter
4
vehicle that may cause an accident
or spray can, and may lead to a fire.
and result in death or serious injury.
• The temperature inside the vehicle
After changing the shift position, make
may cause the plastic lenses and plas-
Driving
sure to confirm the current shift posi-
tic material of glasses to deform or
tion displayed on the shift position indi-
crack.
cator inside the meter.
• Soft drink cans may fracture, causing
■ If you hear a squealing or scraping
the contents to spray over the interior
noise (brake pad wear limit indica-
of the vehicle, and may also cause a
tors)
short circuit in the vehicle’s electrical
components.
Have the brake pads checked and
replaced by your Lexus dealer as soon as
● Do not leave cigarette lighters in the
possible. Rotor damage may result if the
vehicle. If a cigarette lighter is in a
pads are not replaced when needed.
place such as the glove box or on the
It is dangerous to drive the vehicle when
floor, it may be lit accidentally when
the wear limits of the brake pads and/or
luggage is loaded or the seat is
those of the brake discs are exceeded.
adjusted, causing a fire.
■ When the vehicle is stopped
● Do not attach adhesive discs to the
● Do not depress the accelerator pedal
windshield or windows. Do not place
unnecessarily.
containers such as air fresheners on
If the shift position is in any position
the instrument panel or dashboard.
other than P or N, the vehicle may
Adhesive discs or containers may act
accelerate suddenly and unexpect-
as lenses, causing a fire in the vehicle.
edly, causing an accident.
● Do not leave a door or window open if
● In order to prevent accidents due to
the curved glass is coated with a met-
the vehicle rolling away, always keep
allized film such as a silver-colored
depressing the brake pedal while
one. Reflected sunlight may cause the
stopped with the “READY” indicator is
glass to act as a lens, causing a fire.
illuminated, and apply the parking
brake as necessary.
1704-1. Before driving● The brake system consists of 2 orWARNINGmore individual hydraulic systems; if● Always apply the parking brake, shiftone of the systems fails, the other(s)the shift position to P, stop the hybridwill still operate. In this case, the brakesystem and lock the should be depressed moreDo not leave the vehicle unattendedfirmly than usual and the braking dis-while the “READY” indicator is illumi-tance will increase. Have your the vehicle is parked with the shiftposition in P but the parking brake is■ If the vehicle becomes stuck (AWDnot set, the vehicle may start to move,models)possibly leading to an not spin the wheels excessively whenany of the tires is up in the air, or the vehi-● Do not touch the exhaust pipes whilecle is stuck in sand, mud, etc. This maythe “READY” indicator is illuminateddamage the driveline components oror immediately after turning the hybridpropel the vehicle forward or backward,system an so may cause burns.■ When taking a nap in the vehicleNOTICEAlways turn the hybrid system off. Oth-erwise, if you accidentally move the shift■ When driving the vehiclelever or depress the accelerator pedal,● Do not depress the accelerator andthis could cause an accident or fire duebrake pedals at the same time duringto hybrid system overheating. Addition-driving, as this may restrain the hybridally, if the vehicle is parked in a poorlysystem area, exhaust gases may col-lect and enter the vehicle, leading to● Do not use the accelerator pedal ordeath or a serious health the accelerator and brakepedals at the same time to hold the■ When brakingvehicle on a hill.● When the brakes are wet, drive morecautiously.■ Avoiding damage to vehicle partsBraking distance increases when the● Do not turn the steering wheel fully inbrakes are wet, and this may causeeither direction and hold it there for anone side of the vehicle to brake diffe
170
4-1. Before driving
● The brake system consists of 2 or
WARNING
more individual hydraulic systems; if
● Always apply the parking brake, shift
one of the systems fails, the other(s)
the shift position to P, stop the hybrid
will still operate. In this case, the brake
system and lock the vehicle.
pedal should be depressed more
Do not leave the vehicle unattended
firmly than usual and the braking dis-
while the “READY” indicator is illumi-
tance will increase. Have your brakes
nated.
fixed immediately.
If the vehicle is parked with the shift
position in P but the parking brake is
■ If the vehicle becomes stuck (AWD
not set, the vehicle may start to move,
models)
possibly leading to an accident.
Do not spin the wheels excessively when
any of the tires is up in the air, or the vehi-
● Do not touch the exhaust pipes while
cle is stuck in sand, mud, etc. This may
the “READY” indicator is illuminated
damage the driveline components or
or immediately after turning the hybrid
propel the vehicle forward or backward,
system off.
causing an accident.
Doing so may cause burns.
■ When taking a nap in the vehicle
NOTICE
Always turn the hybrid system off. Oth-
erwise, if you accidentally move the shift
■ When driving the vehicle
lever or depress the accelerator pedal,
● Do not depress the accelerator and
this could cause an accident or fire due
brake pedals at the same time during
to hybrid system overheating. Addition-
driving, as this may restrain the hybrid
ally, if the vehicle is parked in a poorly
system output.
ventilated area, exhaust gases may col-
lect and enter the vehicle, leading to
● Do not use the accelerator pedal or
death or a serious health hazard.
depress the accelerator and brake
pedals at the same time to hold the
■ When braking
vehicle on a hill.
● When the brakes are wet, drive more
cautiously.
■ Avoiding damage to vehicle parts
Braking distance increases when the
● Do not turn the steering wheel fully in
brakes are wet, and this may cause
either direction and hold it there for an
one side of the vehicle to brake differ-
extended period of time.
ently than the other side. Also, the
Doing so may damage the power
parking brake may not securely hold
steering motor.
the vehicle.
● When driving over bumps in the road,
● If the electronically controlled brake
drive as slowly as possible to avoid
system does not operate, do not follow
damaging the wheels, underside of the
other vehicles closely and avoid hills or
vehicle, etc.
sharp turns that require braking.
In this case, braking is still possible, but
■ If you get a flat tire while driving
the brake pedal should be depressed
A flat or damaged tire may cause the fol-
more firmly than usual. Also, the brak-
lowing situations. Hold the steering
ing distance will increase. Have your
wheel firmly and gradually depress the
brakes fixed immediately.
brake pedal to slow down the vehicle.
● It may be difficult to control your vehi-
cle.
1714-1. Before drivingSudden start restraint controlNOTICE(Drive-Start Control [DSC])● The vehicle will make abnormalsounds or the following unusual operation● The vehicle will lean performed with the acceleratorInformation on what to do in case of a flatpedal depressed, the hybrid systemtire (P.426)output may be restrained.■ When encountering flooded roads When the shift position is shifted toDo not drive on a road that has floodedR * .after heavy rain, etc. Doing so may causethe following serious damage to the vehi- When the shift position is shiftedcle:from P or R to forward drive shift● Engine stallingposition such as D * .● Short in electrical componentsWhen the system operates, a message● Engine damage caused by waterappears on the multi-information 4Read the message and follow the instruc-In the event that you drive on a and the vehicle is flooded, be sure*Driving: Depending on the situation, the shiftto have your Lexus dealer check the fol-lowing:position may not be changed.● Brake function■ Drive-Start Control (DSC)● Changes in quantity and quality of oil● When the TRAC is turned off (P.294),and fluid used for the engine, hybridsudden start restraint control also doestransmission, operate. If your vehicle has trouble● Lubricant condition for the bearingsescaping from the mud or fresh snow dueand suspension joints (where possi-to sudden start restraint control opera-ble), and the function of all joints, bear-tion, deactivate TRAC (P.294) so thatings, vehicle may become able to escapefrom the mud or fresh the shift control system is damaged byflooding, it may not be possible to shiftthe shift position to P, or from P to otherpositions. In this case, contact your Lexusdealer.■ When parking the vehicleAlways set the parking brake, and shiftthe shift position to P. Failure to do somay cause the vehicle to move or thevehicle may accelerate suddenly if theaccelerator pedal
171
4-1. Before driving
Sudden start restraint control
NOTICE
(Drive-Start Control [DSC])
● The vehicle will make abnormal
sounds or vibrations.
When the following unusual operation
● The vehicle will lean abnormally.
is performed with the accelerator
Information on what to do in case of a flat
pedal depressed, the hybrid system
tire (P.426)
output may be restrained.
■ When encountering flooded roads
 When the shift position is shifted to
Do not drive on a road that has flooded
R * .
after heavy rain, etc. Doing so may cause
the following serious damage to the vehi-
 When the shift position is shifted
cle:
from P or R to forward drive shift
● Engine stalling
position such as D * .
● Short in electrical components
When the system operates, a message
● Engine damage caused by water
appears on the multi-information display.
immersion
4
Read the message and follow the instruc-
In the event that you drive on a flooded
tion.
road and the vehicle is flooded, be sure
*
Driving
: Depending on the situation, the shift
to have your Lexus dealer check the fol-
lowing:
position may not be changed.
● Brake function
■ Drive-Start Control (DSC)
● Changes in quantity and quality of oil
● When the TRAC is turned off (P.294),
and fluid used for the engine, hybrid
sudden start restraint control also does
transmission, etc.
not operate. If your vehicle has trouble
● Lubricant condition for the bearings
escaping from the mud or fresh snow due
and suspension joints (where possi-
to sudden start restraint control opera-
ble), and the function of all joints, bear-
tion, deactivate TRAC (P.294) so that
ings, etc.
the vehicle may become able to escape
from the mud or fresh snow.
If the shift control system is damaged by
flooding, it may not be possible to shift
the shift position to P, or from P to other
positions. In this case, contact your Lexus
dealer.
■ When parking the vehicle
Always set the parking brake, and shift
the shift position to P. Failure to do so
may cause the vehicle to move or the
vehicle may accelerate suddenly if the
accelerator pedal is accidentally
depressed.
1724-1. Before drivingCargo and luggage● Do not place cargo or luggage in or onthe following locations.• At the feet of the driverTake notice of the following infor-• On the front passenger or rear seatsmation about storage precautions,(when stacking items)cargo capacity and load:• On the luggage cover• On the instrument panelWARNING• On the dashboard■ Things that must not be carried in the• In front of the Center Displayluggage compartment● Secure all items in the occupant com-The following things may cause a fire in the luggage compartment:● Receptacles containing gasoline■ When using a roof luggage carrierObserve the following precautions:● Aerosol cans● Place the cargo so that its weight is■ Storage precautionsdistributed evenly between the frontObserve the following rear to do so may prevent the pedals● If loading long or wide cargo, neverfrom being depressed properly, mayexceed the vehicle overall length orblock the driver’s vision, or may result inwidth. (P.442)items hitting the driver or passengers,possibly causing an accident.● Before driving, make sure the cargo is● Stow cargo and luggage in the lug-securely fastened on the roof luggagegage compartment whenever .● Loading cargo on the roof luggage● Do not stack cargo and luggage in thecarrier will make the center of gravityluggage compartment higher than theof the vehicle higher. Avoid , sudden starts, sharp turns,sudden braking or abrupt maneuvers,● When you fold down the rear seats,otherwise it may result in loss of con-long items should not be placedtrol or vehicle rollover due to failure todirectly behind the front this vehicle correctly andresult in death or serious injury.● Never allow anyone to ride in the lug-gage compartment. It is not designed● If driving for a long distance, on roughfor passengers. They should ride inroads, or at high speeds, stop the vehi-their seats with their seat belts prop-cl
172
4-1. Before driving
Cargo and luggage
● Do not place cargo or luggage in or on
the following locations.
• At the feet of the driver
Take notice of the following infor-
• On the front passenger or rear seats
mation about storage precautions,
(when stacking items)
cargo capacity and load:
• On the luggage cover
• On the instrument panel
WARNING
• On the dashboard
■ Things that must not be carried in the
• In front of the Center Display
luggage compartment
● Secure all items in the occupant com-
The following things may cause a fire if
partment.
loaded in the luggage compartment:
● Receptacles containing gasoline
■ When using a roof luggage carrier
Observe the following precautions:
● Aerosol cans
● Place the cargo so that its weight is
■ Storage precautions
distributed evenly between the front
Observe the following precautions.
and rear axles.
Failure to do so may prevent the pedals
● If loading long or wide cargo, never
from being depressed properly, may
exceed the vehicle overall length or
block the driver’s vision, or may result in
width. (P.442)
items hitting the driver or passengers,
possibly causing an accident.
● Before driving, make sure the cargo is
● Stow cargo and luggage in the lug-
securely fastened on the roof luggage
gage compartment whenever possi-
carrier.
ble.
● Loading cargo on the roof luggage
● Do not stack cargo and luggage in the
carrier will make the center of gravity
luggage compartment higher than the
of the vehicle higher. Avoid high
seatbacks.
speeds, sudden starts, sharp turns,
sudden braking or abrupt maneuvers,
● When you fold down the rear seats,
otherwise it may result in loss of con-
long items should not be placed
trol or vehicle rollover due to failure to
directly behind the front seats.
operate this vehicle correctly and
result in death or serious injury.
● Never allow anyone to ride in the lug-
gage compartment. It is not designed
● If driving for a long distance, on rough
for passengers. They should ride in
roads, or at high speeds, stop the vehi-
their seats with their seat belts prop-
cle now and then during the trip to
erly fastened.
make sure the cargo remains in its
place.
● Do not exceed 176.3 lb. (80 kg) cargo
weight on the roof luggage carrier.
1734-1. Before (6) If your vehicle will be towing a■ When loading cargo (vehicles withtrailer, load from your trailer will bemoon roof)transferred to your vehicle. ConsultBe careful not to scratch the surface ofthe moon manual to determine how thisreduces the available cargo and lug-Capacity and distributiongage load capacity of your vehicle.(P.174)Cargo capacity depends on the totalLexus does not recommend towing aweight of the with your vehicle. Your vehicle is(Cargo capacity) = (Total load capac-not designed for trailer )  (Total weight of occupants)Steps for Determining Correct LoadWARNINGLimit ■ Capacity and distribution(1) Locate the statement “The com-● Do not exceed the maximum axle4weight rating or the total vehiclebined weight of occupants and cargoweight never exceed XXX kg or XXXDriving● Even if the total load of occupant’slbs.” on your vehicle’s and the cargo load is less than(2) Determine the combined weight ofthe total load capacity, do not applythe load unevenly. Improper loadingthe driver and passengers that will bemay cause deterioration of steering orriding in your control which may causedeath or serious injury.(3) Subtract the combined weight ofthe driver and passengers from XXXCalculation formula for yourkg or XXX (4) The resulting figure equals theavailable amount of cargo and luggageload example, if the “XXX” amountequals 1400 lbs. and there will be five150 lb passengers in your vehicle, theamount of available cargo and luggageload capacity is 650 lbs. (1400 − 750(5  150) = 650 lbs.)(5) Determine the combined weight ofA Cargo capacityluggage and cargo being loaded onthe vehicle. That weight may not safelyB Total load capacity (vehicle capac-exceed the available cargo and lug-ity weight) (P.442)gage load capacity calculated in StepWhen 2 people with the combined
173
4-1. Before driving
4.
NOTICE
(6) If your vehicle will be towing a
■ When loading cargo (vehicles with
trailer, load from your trailer will be
moon roof)
transferred to your vehicle. Consult
Be careful not to scratch the surface of
the moon roof.
this manual to determine how this
reduces the available cargo and lug-
Capacity and distribution
gage load capacity of your vehicle.
(P.174)
Cargo capacity depends on the total
Lexus does not recommend towing a
weight of the occupants.
trailer with your vehicle. Your vehicle is
(Cargo capacity) = (Total load capac-
not designed for trailer towing.
ity)  (Total weight of occupants)
Steps for Determining Correct Load
WARNING
Limit 
■ Capacity and distribution
(1) Locate the statement “The com-
● Do not exceed the maximum axle
4
weight rating or the total vehicle
bined weight of occupants and cargo
weight rating.
should never exceed XXX kg or XXX
Driving
● Even if the total load of occupant’s
lbs.” on your vehicle’s placard.
weight and the cargo load is less than
(2) Determine the combined weight of
the total load capacity, do not apply
the load unevenly. Improper loading
the driver and passengers that will be
may cause deterioration of steering or
riding in your vehicle.
braking control which may cause
death or serious injury.
(3) Subtract the combined weight of
the driver and passengers from XXX
Calculation formula for your
kg or XXX lbs.
vehicle
(4) The resulting figure equals the
available amount of cargo and luggage
load capacity.
For example, if the “XXX” amount
equals 1400 lbs. and there will be five
150 lb passengers in your vehicle, the
amount of available cargo and luggage
load capacity is 650 lbs. (1400 − 750
(5  150) = 650 lbs.)
(5) Determine the combined weight of
A Cargo capacity
luggage and cargo being loaded on
the vehicle. That weight may not safely
B Total load capacity (vehicle capac-
exceed the available cargo and lug-
ity weight) (P.442)
gage load capacity calculated in Step
When 2 people with the combined
1744-1. Before drivingweight of A lb. (kg) are riding in yourVehicle load limitsvehicle, which has a total load capacity(vehicle capacity weight) of B lb. (kg),Vehicle load limits include totalthe available amount of cargo and lug-load capacity, seating capacity,gage load capacity will be C lb. (kg) astowing capacity and cargo capac-follows:ity.B *2 lb. (kg) − A *1 lb. (kg) = C *3 lb. (kg) Total load capacity (vehicle*1capacity weight): P.442: A = Weight of people*2: B = Total load capacityTotal load capacity means the com-*3: C = Available cargo and luggage loadbined weight of occupants, cargoand this condition, if 3 more passengers withthe combined weight of D lb. (kg) get on, Seating capacity: P.442the available cargo and luggage load willSeating capacity means the maxi-be reduced E lb. (kg) as follows:mum number of occupants whoseC lb. (kg) − D *4 lb. (kg) = E *5 lb. (kg)estimated average weight is 150 lb.*4 : D = Additional weight of people(68 kg) per person.*5: E = Available cargo and luggage load Towing capacityAs shown in the example above, if theLexus does not recommend towingnumber of occupants increases, thea trailer with your and luggage load will be Cargo capacityreduced by an amount that equals theincreased weight due to the additionalCargo capacity may increase oroccupants. In other words, if andecrease depending on the weightincrease in the number of occupantsand the number of an excess of the total loadcapacity (combined weight of occu-■ Total load capacity and seating capacitypants plus cargo and luggage load),These details are also described on the tireyou must reduce the cargo and lug-and loading information label. (P.385)gage on your ■ Overloading the vehicleDo not overload the may not only cause damage to the tires,but also degrade steering and brakingability, resulting in an accident.
174
4-1. Before driving
weight of A lb. (kg) are riding in your
Vehicle load limits
vehicle, which has a total load capacity
(vehicle capacity weight) of B lb. (kg),
Vehicle load limits include total
the available amount of cargo and lug-
load capacity, seating capacity,
gage load capacity will be C lb. (kg) as
towing capacity and cargo capac-
follows:
ity.
B *2 lb. (kg) − A *1 lb. (kg) = C *3 lb. (kg)
 Total load capacity (vehicle
*1
capacity weight): P.442
: A = Weight of people
*2
: B = Total load capacity
Total load capacity means the com-
*3
: C = Available cargo and luggage load
bined weight of occupants, cargo
and luggage.
In this condition, if 3 more passengers with
the combined weight of D lb. (kg) get on,
 Seating capacity: P.442
the available cargo and luggage load will
Seating capacity means the maxi-
be reduced E lb. (kg) as follows:
mum number of occupants whose
C lb. (kg) − D *4 lb. (kg) = E *5 lb. (kg)
estimated average weight is 150 lb.
*4 : D = Additional weight of people
(68 kg) per person.
*5
: E = Available cargo and luggage load
 Towing capacity
As shown in the example above, if the
Lexus does not recommend towing
number of occupants increases, the
a trailer with your vehicle.
cargo and luggage load will be
 Cargo capacity
reduced by an amount that equals the
increased weight due to the additional
Cargo capacity may increase or
occupants. In other words, if an
decrease depending on the weight
increase in the number of occupants
and the number of occupants.
causes an excess of the total load
capacity (combined weight of occu-
■ Total load capacity and seating capacity
pants plus cargo and luggage load),
These details are also described on the tire
you must reduce the cargo and lug-
and loading information label. (P.385)
gage on your vehicle.
WARNING
■ Overloading the vehicle
Do not overload the vehicle.
It may not only cause damage to the tires,
but also degrade steering and braking
ability, resulting in an accident.
1754-1. Before drivingTrailer towingDinghy towingLexus does not recommend towingYour vehicle is not designed to bea trailer with your vehicle. Lexusdinghy towed (with 4 wheels on thealso does not recommend theground) behind a motor of a tow hitch or the useof a tow hitch carrier for a wheel-chair, scooter, bicycle, etc. Yourvehicle is not designed for trailertowing or for the use of tow hitchmounted 4■ To avoid serious damage to your vehi-cleDrivingDo not tow your vehicle with the fourwheels on the ground.■ To prevent causing serious damageto the hybrid transmission and AWDsystem (AWD models)2WD models: Never tow this vehiclefrom the rear with the front wheels on may cause serious damage to thetransmission.
175
4-1. Before driving
Trailer towing
Dinghy towing
Lexus does not recommend towing
Your vehicle is not designed to be
a trailer with your vehicle. Lexus
dinghy towed (with 4 wheels on the
also does not recommend the
ground) behind a motor home.
installation of a tow hitch or the use
of a tow hitch carrier for a wheel-
chair, scooter, bicycle, etc. Your
vehicle is not designed for trailer
towing or for the use of tow hitch
mounted carriers.
NOTICE
4
■ To avoid serious damage to your vehi-
cle
Driving
Do not tow your vehicle with the four
wheels on the ground.
■ To prevent causing serious damage
to the hybrid transmission and AWD
system (AWD models)
2WD models: Never tow this vehicle
from the rear with the front wheels on the
ground.
This may cause serious damage to the
transmission.
1764-1. Before drivingNOTICEAWD models: Never tow this vehiclewith any of the wheels on the may cause serious damage to thehybrid transmission and AWD system.
176
4-1. Before driving
NOTICE
AWD models: Never tow this vehicle
with any of the wheels on the ground.
This may cause serious damage to the
hybrid transmission and AWD system.
1774-2. Driving procedurespower switch mode.4-2.Driving proceduresPower (ignition) switchPerforming the following opera-tions when carrying the electronickey on your person starts the hybridsystem or changes power the hybrid system4 Check that the “READY” indicatoris illuminated.1 Press the parking brake switch tocheck that the parking brake is vehicle cannot be driven if the(P.192)“READY” indicator is brake indicator will come on.■ Power switch illumination2 Firmly depress the brake pedal.4According to the situation, the powerswitch illumination operates as a message will be displayed on● When a front door is opened, or theDrivingthe multi-information switch mode is changed fromACC or ON to OFF, the power switchIf it is not displayed, the hybrid system can-illumination illuminates be started.● When depressing the brake pedal withWhen the shift position is N, the hybrid sys-carrying the electronic key on your per-tem cannot start. Shift the shift position to Pson, the power switch illumination illumi-when starting the hybrid system. (P.185)nates brightly.3 Press the power switch shortly and● When the power switch is in ACC , the power switch illumination operating the power switch, oneshort, firm press is enough. It is not neces-■ If the hybrid system does not startsary to press and hold the switch.● The immobilizer system may not haveIf the “READY” indicator turns on, thebeen deactivated. (P.71)hybrid system will operate your Lexus depressing the brake pedal until● If a message related to start-up is shownthe “READY” indicator is the multi-information display, read themessage and follow the hybrid system can be started from any● If the door is unlocked with the mechani-cal key, the hybrid system cannot bestarted using the smart access systemwith push-button start. Refer to P.431 tostart the hyb
177
4-2. Driving procedures
power switch mode.
4-2.Driving procedures
Power (ignition) switch
Performing the following opera-
tions when carrying the electronic
key on your person starts the hybrid
system or changes power switch
modes.
Starting the hybrid system
4 Check that the “READY” indicator
is illuminated.
1 Press the parking brake switch to
check that the parking brake is set.
The vehicle cannot be driven if the
(P.192)
“READY” indicator is off.
Parking brake indicator will come on.
■ Power switch illumination
2 Firmly depress the brake pedal.
4
According to the situation, the power
switch illumination operates as follows.
and a message will be displayed on
● When a front door is opened, or the
Driving
the multi-information display.
power switch mode is changed from
ACC or ON to OFF, the power switch
If it is not displayed, the hybrid system can-
illumination illuminates dimly.
not be started.
● When depressing the brake pedal with
When the shift position is N, the hybrid sys-
carrying the electronic key on your per-
tem cannot start. Shift the shift position to P
son, the power switch illumination illumi-
when starting the hybrid system. (P.185)
nates brightly.
3 Press the power switch shortly and
● When the power switch is in ACC or
firmly.
ON, the power switch illumination illumi-
nates.
When operating the power switch, one
short, firm press is enough. It is not neces-
■ If the hybrid system does not start
sary to press and hold the switch.
● The immobilizer system may not have
If the “READY” indicator turns on, the
been deactivated. (P.71)
hybrid system will operate normally.
Contact your Lexus dealer.
Continue depressing the brake pedal until
● If a message related to start-up is shown
the “READY” indicator is illuminated.
on the multi-information display, read the
message and follow the instructions.
The hybrid system can be started from any
● If the door is unlocked with the mechani-
cal key, the hybrid system cannot be
started using the smart access system
with push-button start. Refer to P.431 to
start the hybrid system. However, if the
electronic key is carried inside the vehi-
cle and the doors are locked (P.122),
the hybrid system can be started.
1784-2. Driving procedures■ When the ambient temperature is low,■ Electronic key batterysuch as during winter driving conditionsP.392● When starting the hybrid system, the■ Operation of the power switchflashing time of the “READY” indicator● If the switch is not pressed shortly andmay be long. Leave the vehicle as it isfirmly, the power switch mode may notuntil the “READY” indicator is steady on,change or the hybrid system may notas steady means the vehicle is able .● If attempting to restart the hybrid system● When the hybrid battery (traction bat-immediately after turning the powertery) is extremely cold (below approxi-switch off, the hybrid system may not startmately -22°F [-30°C]) under thein some cases. After turning the powerinfluence of the outside temperature, itswitch off, please wait a few secondsmay not be possible to start the hybridbefore restarting the hybrid . In this case, try to start the hybridsystem again after the temperature of the■ Customizationhybrid battery increases due to the out-If the smart access system with push-buttonside temperature increase has been deactivated in a customized■ Sounds and vibrations specific to asetting, refer to P.430.Hybrid Electric VehicleP.64WARNING■ If the 12-volt battery is discharged■ When starting the hybrid systemThe hybrid system cannot be started usingAlways start the hybrid system while sit-the smart access system with push-buttonting in the driver’s seat. Do not depressstart. Refer to P.432 to restart the hybridthe accelerator pedal while starting system under any circumstances.■ Electronic key battery depletionDoing so may cause an accident result-P.114ing in death or serious injury.■ Conditions affecting operationP.140NOTICE■ Note for the entry function■ When starting the hybrid systemP.141If the hybrid system becomes difficult tostart, have your vehicle checked by your■ When “Access System with dealer See ow
178
4-2. Driving procedures
■ When the ambient temperature is low,
■ Electronic key battery
such as during winter driving conditions
P.392
● When starting the hybrid system, the
■ Operation of the power switch
flashing time of the “READY” indicator
● If the switch is not pressed shortly and
may be long. Leave the vehicle as it is
firmly, the power switch mode may not
until the “READY” indicator is steady on,
change or the hybrid system may not
as steady means the vehicle is able to
start.
move.
● If attempting to restart the hybrid system
● When the hybrid battery (traction bat-
immediately after turning the power
tery) is extremely cold (below approxi-
switch off, the hybrid system may not start
mately -22°F [-30°C]) under the
in some cases. After turning the power
influence of the outside temperature, it
switch off, please wait a few seconds
may not be possible to start the hybrid
before restarting the hybrid system.
system. In this case, try to start the hybrid
system again after the temperature of the
■ Customization
hybrid battery increases due to the out-
If the smart access system with push-button
side temperature increase etc.
start has been deactivated in a customized
■ Sounds and vibrations specific to a
setting, refer to P.430.
Hybrid Electric Vehicle
P.64
WARNING
■ If the 12-volt battery is discharged
■ When starting the hybrid system
The hybrid system cannot be started using
Always start the hybrid system while sit-
the smart access system with push-button
ting in the driver’s seat. Do not depress
start. Refer to P.432 to restart the hybrid
the accelerator pedal while starting the
system.
hybrid system under any circumstances.
■ Electronic key battery depletion
Doing so may cause an accident result-
P.114
ing in death or serious injury.
■ Conditions affecting operation
P.140
NOTICE
■ Note for the entry function
■ When starting the hybrid system
P.141
If the hybrid system becomes difficult to
start, have your vehicle checked by your
■ When “Access System with
Lexus dealer immediately.
malfunction See owner’s manual” is dis-
played on the multi-information display
■ Symptoms indicating a malfunction
with the power switch
The system may be malfunctioning. Have
the vehicle inspected by your Lexus dealer
If the power switch seems to be operat-
immediately.
ing somewhat differently than usual, such
as the switch sticking slightly, there may
■ If the “READY” indicator does not
be a malfunction. Contact your Lexus
come on
dealer immediately.
In the event that the “READY” indicator
does not come on even after performing
the proper procedures for starting the vehi-
Stopping the hybrid system
cle, contact your Lexus dealer immediately.
■ If the hybrid system is malfunctioning
1 Stop the vehicle completely.
P.69
2 Set the parking brake. (P.192)
1794-2. Driving procedures3 Press the P position the driver’s door is opened.(P.185)■ Locking the door from outside with thehybrid system operatingCheck that the shift position indicator1With the driver’s door open, pull theshows P and the parking brake indicator isdriver’s door handle and insert key.4 Press the power hybrid system will stop, and the meterdisplay will be extinguished (the shift posi-tion indicator will be extinguished a fewseconds after the meter display).5 Release the brake pedal and checkthat “ACCESSORY” or “POWERON” is not shown on the meter.2 Turn the mechanical key counterclock-wise.■ When the shift control system malfunc-tions4When attempting to turn the power switchoff while there is a malfunction in the shiftcontrol system, the power switch mode mayDrivingchange to ACC. In this case, ACC may beturned off by applying the parking brakeand pressing the power switch there is a malfunction in the system, havethe vehicle inspected by your Lexus dealer3 Pull out the mechanical key and door.■ Automatic hybrid system shut off fea-ture● The vehicle is equipped with a featurethat automatically shuts off the hybrid sys-tem when the shift lever is in P with thehybrid system operating for an extendedperiod.● The hybrid system will automatically shutoff after approximately 1 hour if it hasbeen left running while the shift lever is inP.● The timer for the automatic hybrid systemshut off feature will reset if the brakepedal is depressed or if the shift lever is ina position other than P.● After the vehicle is parked, if the door islocked with the door lock switch(P.122) from the inside or the mechan-ical key from the outside, the automatichybrid system shut off feature will be dis-abled. The timer for the automatic hybridsystem shut off feature will be re-enabled
179
4-2. Driving procedures
3 Press the P position switch.
if the driver’s door is opened.
(P.185)
■ Locking the door from outside with the
hybrid system operating
Check that the shift position indicator
1
With the driver’s door open, pull the
shows P and the parking brake indicator is
driver’s door handle and insert the
illuminated.
mechanical key.
4 Press the power switch.
The hybrid system will stop, and the meter
display will be extinguished (the shift posi-
tion indicator will be extinguished a few
seconds after the meter display).
5 Release the brake pedal and check
that “ACCESSORY” or “POWER
ON” is not shown on the meter.
2 Turn the mechanical key counterclock-
wise.
■ When the shift control system malfunc-
tions
4
When attempting to turn the power switch
off while there is a malfunction in the shift
control system, the power switch mode may
Driving
change to ACC. In this case, ACC may be
turned off by applying the parking brake
and pressing the power switch again.
If there is a malfunction in the system, have
the vehicle inspected by your Lexus dealer
3 Pull out the mechanical key and close
immediately.
the door.
■ Automatic hybrid system shut off fea-
ture
● The vehicle is equipped with a feature
that automatically shuts off the hybrid sys-
tem when the shift lever is in P with the
hybrid system operating for an extended
period.
● The hybrid system will automatically shut
off after approximately 1 hour if it has
been left running while the shift lever is in
P.
● The timer for the automatic hybrid system
shut off feature will reset if the brake
pedal is depressed or if the shift lever is in
a position other than P.
● After the vehicle is parked, if the door is
locked with the door lock switch
(P.122) from the inside or the mechan-
ical key from the outside, the automatic
hybrid system shut off feature will be dis-
abled. The timer for the automatic hybrid
system shut off feature will be re-enabled
1804-2. Driving procedures● Do not leave the vehicle with theWARNINGhybrid system operating for a long■ Stopping the hybrid system in antime. If such a situation cannot beemergencyavoided, park the vehicle in an openspace and ensure that exhaust fumes● If you want to stop the hybrid system indo not enter the vehicle emergency while driving the vehi-cle, press and hold the power switch● Do not leave the hybrid system oper-for more than 2 seconds, or press itating in an area with snow build-up, orbriefly 3 times or more in it is snowing. If snowbanks build(P.402)up around the vehicle while the hybridHowever, do not touch the powersystem is operating, exhaust gasesswitch while driving except in an emer-may collect and enter the . Turning the hybrid system offwhile driving will not cause loss ofsteering or braking power switch modesHowever, power assist for the steeringwheel may be lost making it difficult toModes can be changed by pressingsteer smoothly before stopping thevehicle depending on the remainingthe power switch with the brake pedalcharge in the 12-volt battery or usagereleased. (The mode changes eachconditions. In this situation, you shouldtime the switch is pressed.)pull over and stop the vehicle as soonas it is safe to do so.● If the power switch is operated whilethe vehicle is running, a warning mes-sage will be shown on the multi-infor-mation display and a buzzer sounds.● When restarting the hybrid systemafter an emergency shutdown, shift theshift lever to N and press the powerswitch shortly and firmly.■ When parkingExhaust gases include harmful carbonmonoxide (CO), which is colorless andodorless. Observe the following to do so may cause exhaust gasesto enter the vehicle and may lead to anaccident caused by light-headedness, ormay lead to death or a serious healthhazard.● If the vehicle is in a poorly ventilatedA ACCESSORYarea or a closed area, such as agarage, stop the hybr
180
4-2. Driving procedures
● Do not leave the vehicle with the
WARNING
hybrid system operating for a long
■ Stopping the hybrid system in an
time. If such a situation cannot be
emergency
avoided, park the vehicle in an open
space and ensure that exhaust fumes
● If you want to stop the hybrid system in
do not enter the vehicle interior.
an emergency while driving the vehi-
cle, press and hold the power switch
● Do not leave the hybrid system oper-
for more than 2 seconds, or press it
ating in an area with snow build-up, or
briefly 3 times or more in succession.
where it is snowing. If snowbanks build
(P.402)
up around the vehicle while the hybrid
However, do not touch the power
system is operating, exhaust gases
switch while driving except in an emer-
may collect and enter the vehicle.
gency. Turning the hybrid system off
while driving will not cause loss of
steering or braking control.
Changing power switch modes
However, power assist for the steering
wheel may be lost making it difficult to
Modes can be changed by pressing
steer smoothly before stopping the
vehicle depending on the remaining
the power switch with the brake pedal
charge in the 12-volt battery or usage
released. (The mode changes each
conditions. In this situation, you should
time the switch is pressed.)
pull over and stop the vehicle as soon
as it is safe to do so.
● If the power switch is operated while
the vehicle is running, a warning mes-
sage will be shown on the multi-infor-
mation display and a buzzer sounds.
● When restarting the hybrid system
after an emergency shutdown, shift the
shift lever to N and press the power
switch shortly and firmly.
■ When parking
Exhaust gases include harmful carbon
monoxide (CO), which is colorless and
odorless. Observe the following precau-
tions.
Failure to do so may cause exhaust gases
to enter the vehicle and may lead to an
accident caused by light-headedness, or
may lead to death or a serious health
hazard.
● If the vehicle is in a poorly ventilated
A ACCESSORY
area or a closed area, such as a
garage, stop the hybrid system.
B POWER ON
1 OFF
The emergency flashers can be used.
2 ACC *
1814-2. Driving proceduresSome electrical components such as the● If “ACCESSORY” or “POWER ON”audio system can be displayed on the multi-information“ACCESSORY” will be displayed on thedisplay while the hybrid system is notoperating, the power switch is . Exit the vehicle after turning the3 ONpower switch electrical components can be used.“POWER ON” will be displayed on themeter.* : ACC mode can be enabled/disabled onthe customize menu.(P.469)■ When ACC customization is in offWith the power switch is turned off, themultimedia system can still be used for acertain time until the battery saving functionstarts operating.■ Auto power off function4● If the vehicle is left in ACC or ON (thehybrid system is not operating) for moreDrivingthan 20 minutes with the shift position inP, the power switch will automaticallyturn to OFF.● If the 12-volt battery is low with the shiftposition is in P and the power switch is inACC or ON (the hybrid system is notoperating), a buzzer sounds and a mes-sage will be displayed on the multi-infor-mation display. If this continues, thepower switch is automatically turn , this function cannot entirely pre-vent the 12-volt battery discharge. Do notleave the vehicle with the power switch inACC or ON for long periods of time whenthe hybrid system is not ■ To prevent 12-volt battery discharge● Do not leave the power switch in ACCor ON for long periods of time withoutthe hybrid system on.
181
4-2. Driving procedures
Some electrical components such as the
● If “ACCESSORY” or “POWER ON”
audio system can be used.
is displayed on the multi-information
“ACCESSORY” will be displayed on the
display while the hybrid system is not
operating, the power switch is not
meter.
OFF. Exit the vehicle after turning the
3 ON
power switch off.
All electrical components can be used.
“POWER ON” will be displayed on the
meter.
* : ACC mode can be enabled/disabled on
the customize menu.(P.469)
■ When ACC customization is in off
With the power switch is turned off, the
multimedia system can still be used for a
certain time until the battery saving function
starts operating.
■ Auto power off function
4
● If the vehicle is left in ACC or ON (the
hybrid system is not operating) for more
Driving
than 20 minutes with the shift position in
P, the power switch will automatically
turn to OFF.
● If the 12-volt battery is low with the shift
position is in P and the power switch is in
ACC or ON (the hybrid system is not
operating), a buzzer sounds and a mes-
sage will be displayed on the multi-infor-
mation display. If this continues, the
power switch is automatically turn to
OFF.
However, this function cannot entirely pre-
vent the 12-volt battery discharge. Do not
leave the vehicle with the power switch in
ACC or ON for long periods of time when
the hybrid system is not operating.
NOTICE
■ To prevent 12-volt battery discharge
● Do not leave the power switch in ACC
or ON for long periods of time without
the hybrid system on.
1824-2. Driving proceduresmation drive mode● The temperature of the hybrid system EV drive mode, electric power isThe vehicle has been left in the sun,driven on a hill, driven at high speeds, by the hybrid battery● The temperature of the hybrid system is(traction battery), and only motor (traction motor) isThe vehicle has been left for a longused to drive the of time, mode allows you to drive in res-● The gasoline engine is warming areas early in the morning● The hybrid battery (traction battery) late at night, or in indoor park-The remaining battery level indicated ining lots, etc., without concern forthe energy monitor display is and gas emissions.(P.107)● Vehicle speed is , when the Acoustic Vehi-● The accelerator pedal is depressed firmlycle Alerting System is active, theor the vehicle is on a hill, may produce sound.● The windshield defogger is in use.■ Switching to EV drive mode when theOperating instructionsgasoline engine is coldAfter the hybrid system has started and theTurns EV drive mode on/off“READY” indicator has illuminated, pressthe EV drive mode switch before the gaso-When EV drive mode is turned on, the EVline engine starts to switch to EV drivedrive mode indicator will come the switch when in EV drive modeHowever, depending on vehicle conditions,will return the vehicle to normal drivingEV drive mode may be canceled and nor-(using the gasoline engine and electricmal driving (using the gasoline engine andelectric motor [traction motor]) may bemotor [traction motor]).resumed.■ Automatic cancelation of EV drivemodeWhen driving in EV drive mode, the gaso-line engine may automatically restart in thefollowing situations. When EV drive modeis canceled, a buzzer will sound, the EVdrive mode indicator will go off after flash-ing, and a message is displayed on themulti-information display.● The hybrid battery (tr
182
4-2. Driving procedures
mation display.
EV drive mode
● The temperature of the hybrid system is
high.
In EV drive mode, electric power is
The vehicle has been left in the sun,
driven on a hill, driven at high speeds, etc.
supplied by the hybrid battery
● The temperature of the hybrid system is
(traction battery), and only the
low.
electric motor (traction motor) is
The vehicle has been left for a long
used to drive the vehicle.
period of time, etc.
This mode allows you to drive in res-
● The gasoline engine is warming up.
idential areas early in the morning
● The hybrid battery (traction battery) is
low.
and late at night, or in indoor park-
The remaining battery level indicated in
ing lots, etc., without concern for
the energy monitor display is low.
noises and gas emissions.
(P.107)
● Vehicle speed is high.
However, when the Acoustic Vehi-
● The accelerator pedal is depressed firmly
cle Alerting System is active, the
or the vehicle is on a hill, etc.
vehicle may produce sound.
● The windshield defogger is in use.
■ Switching to EV drive mode when the
Operating instructions
gasoline engine is cold
After the hybrid system has started and the
Turns EV drive mode on/off
“READY” indicator has illuminated, press
the EV drive mode switch before the gaso-
When EV drive mode is turned on, the EV
line engine starts to switch to EV drive
drive mode indicator will come on.
mode.
Pressing the switch when in EV drive mode
However, depending on vehicle conditions,
will return the vehicle to normal driving
EV drive mode may be canceled and nor-
(using the gasoline engine and electric
mal driving (using the gasoline engine and
electric motor [traction motor]) may be
motor [traction motor]).
resumed.
■ Automatic cancelation of EV drive
mode
When driving in EV drive mode, the gaso-
line engine may automatically restart in the
following situations. When EV drive mode
is canceled, a buzzer will sound, the EV
drive mode indicator will go off after flash-
ing, and a message is displayed on the
multi-information display.
● The hybrid battery (traction battery)
becomes low.
■ Situations in which EV drive mode can-
The remaining battery level indicated in
not be turned on
the energy monitor display is low.
(P.107)
It may not be possible to turn EV drive
mode on in the following situations. If it can-
● Vehicle speed is high.
not be turned on, a buzzer will sound and a
● The accelerator pedal is depressed firmly
message will be shown on the multi-infor-
or the vehicle is on a hill, etc.
1834-2. Driving procedures■ Possible driving distance when drivingWARNINGin EV drive mode■ Caution while drivingEV drive mode’s possible driving distanceranges from a few hundred meters toWhen driving in EV drive mode, pay spe-approximately 0.6 mile (1 km). However,cial attention to the area around the vehi-depending on vehicle conditions, there arecle. Because there is no engine noise,situations when EV drive mode cannot bepedestrians, people riding bicycles orused. (The distance that is possible dependsother people and vehicles in the areaon the hybrid battery [traction battery] levelmay not be aware of the vehicle startingand driving conditions.)off or approaching them, so take extracare while driving. Therefore, take extra■ Fuel economycare while driving even if the AcousticThe hybrid system is designed to achieveVehicle Alerting System is best possible fuel economy during nor-mal driving (using the gasoline engine andelectric motor [traction motor]). Driving inEV drive mode more than necessary maylower fuel economy.■ If “EV Mode Unavailable” is shown onthe multi-information display4The EV drive mode is not available. Thereason the EV drive mode is not available(the vehicle is idling, battery charge is low,Drivingvehicle speed is higher than the EV drivemode operating speed range or accelera-tor pedal is depressed too much) may bedisplayed. Use the EV drive mode when itbecomes available.■ If “EV Mode Deactivated” is shown onthe multi-information displayThe EV drive mode has been automaticallycanceled. The reason the EV drive mode isnot available (the battery charge is low,vehicle speed is higher than the EV drivemode operating speed range or accelera-tor pedal is depressed too much) may bedisplayed. Drive the vehicle for a whilebefore attempting to turn on the EV drivemode again.
183
4-2. Driving procedures
■ Possible driving distance when driving
WARNING
in EV drive mode
■ Caution while driving
EV drive mode’s possible driving distance
ranges from a few hundred meters to
When driving in EV drive mode, pay spe-
approximately 0.6 mile (1 km). However,
cial attention to the area around the vehi-
depending on vehicle conditions, there are
cle. Because there is no engine noise,
situations when EV drive mode cannot be
pedestrians, people riding bicycles or
used. (The distance that is possible depends
other people and vehicles in the area
on the hybrid battery [traction battery] level
may not be aware of the vehicle starting
and driving conditions.)
off or approaching them, so take extra
care while driving. Therefore, take extra
■ Fuel economy
care while driving even if the Acoustic
The hybrid system is designed to achieve
Vehicle Alerting System is active.
the best possible fuel economy during nor-
mal driving (using the gasoline engine and
electric motor [traction motor]). Driving in
EV drive mode more than necessary may
lower fuel economy.
■ If “EV Mode Unavailable” is shown on
the multi-information display
4
The EV drive mode is not available. The
reason the EV drive mode is not available
(the vehicle is idling, battery charge is low,
Driving
vehicle speed is higher than the EV drive
mode operating speed range or accelera-
tor pedal is depressed too much) may be
displayed. Use the EV drive mode when it
becomes available.
■ If “EV Mode Deactivated” is shown on
the multi-information display
The EV drive mode has been automatically
canceled. The reason the EV drive mode is
not available (the battery charge is low,
vehicle speed is higher than the EV drive
mode operating speed range or accelera-
tor pedal is depressed too much) may be
displayed. Drive the vehicle for a while
before attempting to turn on the EV drive
mode again.
1844-2. Driving proceduresHybrid transmissionShift posi-Objective or functiontionSelect the shift position dependingNormal driving *1Don your purpose and situation.S mode driving *2 (P.190)S*1: To improve fuel efficiency and reduceShift position purpose and func-noise, set the shift position in D for nor-tionsmal driving. You can choose gear rangesuitable for your driving situation by Vehicles without paddle shiftoperating the paddle shift *2: By selecting shift ranges using S mode,Shift posi-you can control accelerating force andObjective or functiontionengine braking the vehicle/startingP■ When driving with dynamic radar cruisethe hybrid systemcontrol activatedRReversingEven when performing the followingactions with the intent of enabling engineNeutralbraking, engine braking will not activateN(Condition in which thebecause dynamic radar cruise control willpower is not transmitted)not be canceled.● Vehicles with paddle shift switches:Normal driving *DWhile driving in S mode, downshifting to5 or 4. (P.189, 190)Applying engine braking or● When switching the driving mode tostrong braking when theSport mode while driving in D pedal has been(P.290)released on steep downward■ Restraining sudden start (Drive-Startslopes )*P.171: To improve fuel efficiency and reducenoise, set the shift position in D for nor-■ If a message about a shift operation ismal prevent the shift position from being Vehicles with paddle shift switchesselected incorrectly or the vehicle frommoving unexpectedly, the shift position mayShift posi-Objective or functionbe changed automatically or operating thetionshift lever may be required. In this case,change the shift position following the mes-Parking the vehicle/startingPsages on the multi-information hybrid system■ After recharging/reconnecting the 12-RReversingvolt batteryP.434NeutralN(Condition in which thepower is not transmitted)
184
4-2. Driving procedures
Hybrid transmission
Shift posi-
Objective or function
tion
Select the shift position depending
Normal driving *1
D
on your purpose and situation.
S mode driving *2 (P.190)
S
*1
: To improve fuel efficiency and reduce
Shift position purpose and func-
noise, set the shift position in D for nor-
tions
mal driving. You can choose gear range
suitable for your driving situation by
 Vehicles without paddle shift
operating the paddle shift switches.
switches
*2
: By selecting shift ranges using S mode,
Shift posi-
you can control accelerating force and
Objective or function
tion
engine braking force.
Parking the vehicle/starting
P
■ When driving with dynamic radar cruise
the hybrid system
control activated
R
Reversing
Even when performing the following
actions with the intent of enabling engine
Neutral
braking, engine braking will not activate
N
(Condition in which the
because dynamic radar cruise control will
power is not transmitted)
not be canceled.
● Vehicles with paddle shift switches:
Normal driving *
D
While driving in S mode, downshifting to
5 or 4. (P.189, 190)
Applying engine braking or
● When switching the driving mode to
strong braking when the
Sport mode while driving in D position.
B
accelerator pedal has been
(P.290)
released on steep downward
■ Restraining sudden start (Drive-Start
slopes etc.
Control)
*
P.171
: To improve fuel efficiency and reduce
noise, set the shift position in D for nor-
■ If a message about a shift operation is
mal driving.
shown
To prevent the shift position from being
 Vehicles with paddle shift switches
selected incorrectly or the vehicle from
moving unexpectedly, the shift position may
Shift posi-
Objective or function
be changed automatically or operating the
tion
shift lever may be required. In this case,
change the shift position following the mes-
Parking the vehicle/starting
P
sages on the multi-information display.
the hybrid system
■ After recharging/reconnecting the 12-
R
Reversing
volt battery
P.434
Neutral
N
(Condition in which the
power is not transmitted)
1854-2. Driving proceduresShift position display and how toWARNINGchange the shift position■ When driving on slippery road sur-faces Vehicles without paddle shiftDo not accelerate or shift the shift posi-switchestion changes in engine braking maycause the vehicle to spin or skid, resultingin an ■ Hybrid battery (traction battery)chargeIf the shift position is in N, the hybrid bat-tery (traction battery) will not becharged. To help prevent the batteryfrom discharging, avoid leaving the Nposition selected for a certain amount of4time.■ Situations where shift control systemDrivingmalfunctions are possibleA Shift leverIf any of the following situations occur,Operate the shift lever gently and securelyshift control system malfunctions arein the direction of the arrow on the shiftpossible. Immediately stop the vehicle ina safe place on level ground, apply theposition brake, and then contact yourTo shift to N, slide the shift lever in theLexus of the arrow and hold it.● When the warning message indicatingRelease the shift lever after each shiftingthe shift control system malfunctionoperation to allow it to return to its regularappears on the multi-information dis-play. (P.420)position ().● The display indicates that no shift posi-Shifting to B is only possible when the shifttion is selected for more than a fewposition is in shifting from P to N, D or R, from N,D, B or R to P, from D or B to R, or from Rto D, ensure that the brake pedal is beingdepressed and the vehicle is stationary.B Shift position indicatorMeter display:The current shift position is lever display:The current shift position is selecting the shift position, makesure that the shift position has been
185
4-2. Driving procedures
Shift position display and how to
WARNING
change the shift position
■ When driving on slippery road sur-
faces
 Vehicles without paddle shift
Do not accelerate or shift the shift posi-
switches
tion suddenly.
Sudden changes in engine braking may
cause the vehicle to spin or skid, resulting
in an accident.
NOTICE
■ Hybrid battery (traction battery)
charge
If the shift position is in N, the hybrid bat-
tery (traction battery) will not be
charged. To help prevent the battery
from discharging, avoid leaving the N
position selected for a certain amount of
4
time.
■ Situations where shift control system
Driving
malfunctions are possible
A Shift lever
If any of the following situations occur,
Operate the shift lever gently and securely
shift control system malfunctions are
in the direction of the arrow on the shift
possible. Immediately stop the vehicle in
a safe place on level ground, apply the
position indicator.
parking brake, and then contact your
To shift to N, slide the shift lever in the
Lexus dealer.
direction of the arrow and hold it.
● When the warning message indicating
Release the shift lever after each shifting
the shift control system malfunction
operation to allow it to return to its regular
appears on the multi-information dis-
play. (P.420)
position (
).
● The display indicates that no shift posi-
Shifting to B is only possible when the shift
tion is selected for more than a few
position is in D.
seconds.
When shifting from P to N, D or R, from N,
D, B or R to P, from D or B to R, or from R
to D, ensure that the brake pedal is being
depressed and the vehicle is stationary.
B Shift position indicator
Meter display:
The current shift position is illuminated.
Shift lever display:
The current shift position is illuminated.
When selecting the shift position, make
sure that the shift position has been
1864-2. Driving procedureschanged to the desired position by check-Meter display:ing the shift position indicator provided onThe current shift position is instrument lever display:C P position switchThe current shift position is selecting the shift position, makeFully stop the vehicle and set the parkingsure that the shift position has beenbrake, and then press the P position to the desired position by check-When the shift position is changed to P, theing the shift position indicator provided onswitch instrument that the shift position indicatorshows P.C P position switch Vehicles with paddle shift switchesFully stop the vehicle and set the parkingbrake, and then press the P position the shift position is changed to P, theswitch that the shift position indicatorshows P.■ Changing the shift position in eachpower switch mode● The shift position cannot be changedwhen the power switch is in ACC or off.● When the power switch is in ON, if the“READY” indicator is not illuminated, theshift position can only be changed to N.● When the “READY” indicator is illumi-nated, the shift position can be changedA Shift leverfrom P to D, N, or the shift lever gently and securely● When the “READY” indicator is flashing,the shift position cannot be changed fromin the direction of the arrow on the shiftP to any other position, even if the shiftposition is operated. Operate the shift leverTo shift to N, slide the shift lever in theagain after the “READY” indicatordirection of the arrow and hold from flashing to the shift lever after each shifting■ Shifting the shift position from P to otheroperation to allow it to return to its regularpositions● While depressing the brake pedal firmly,position ().operate the shift lever. If the shift lever isShifting to S is only possible when the shiftoperated without depressin
186
4-2. Driving procedures
changed to the desired position by check-
Meter display:
ing the shift position indicator provided on
The current shift position is illuminated.
the instrument cluster.
Shift lever display:
C P position switch
The current shift position is illuminated.
When selecting the shift position, make
Fully stop the vehicle and set the parking
sure that the shift position has been
brake, and then press the P position switch.
changed to the desired position by check-
When the shift position is changed to P, the
ing the shift position indicator provided on
switch illuminates.
the instrument cluster.
Check that the shift position indicator
shows P.
C P position switch
 Vehicles with paddle shift switches
Fully stop the vehicle and set the parking
brake, and then press the P position switch.
When the shift position is changed to P, the
switch illuminates.
Check that the shift position indicator
shows P.
■ Changing the shift position in each
power switch mode
● The shift position cannot be changed
when the power switch is in ACC or off.
● When the power switch is in ON, if the
“READY” indicator is not illuminated, the
shift position can only be changed to N.
● When the “READY” indicator is illumi-
nated, the shift position can be changed
A Shift lever
from P to D, N, or R.
Operate the shift lever gently and securely
● When the “READY” indicator is flashing,
the shift position cannot be changed from
in the direction of the arrow on the shift
P to any other position, even if the shift
position indicator.
lever is operated. Operate the shift lever
To shift to N, slide the shift lever in the
again after the “READY” indicator
direction of the arrow and hold it.
changes from flashing to illuminated.
Release the shift lever after each shifting
■ Shifting the shift position from P to other
operation to allow it to return to its regular
positions
● While depressing the brake pedal firmly,
position (
).
operate the shift lever. If the shift lever is
Shifting to S is only possible when the shift
operated without depressing the brake
pedal, the buzzer will sound and the shift-
position is in D.
ing operation will be disabled.
When shifting from P to N, D or R, from N,
● When selecting the shift position, make
D, S or R to P, from D or S to R, or from R
sure that the shift position has been
to D, ensure that the brake pedal is being
changed to the desired position by
depressed and the vehicle is stationary.
checking the shift position indicator pro-
vided on the instrument cluster.
B Shift position indicator
1874-2. Driving procedures● The shift position cannot be changed● When attempting to change the shift*1*2position to D while the vehicle is movingfrom P to B or S *1 : Vehicles without paddle shift switchesWhen driving at a low speed, the shift posi-*2: Vehicles with paddle shift switchestion may change to D.■ The shift position cannot be changed● When attempting to change the shiftwhenposition from R to B *1 or S *2In the following situations, a buzzer will*1: Vehicles without paddle shift switchessound to inform you that the shift position*2 : Vehicles with paddle shift switchescannot be changed. Use the appropriateoperation to attempt to change the shift■ If the N shift position is selected whileposition ● When attempting to change the shiftIf the shift lever is moved to N while drivingposition from P with the brake pedal notabove a certain speed, the shift position willdepressedchange to N without holding the shift lever● When attempting to change the shiftin the N position. In this situation, a buzzerposition from P with the acceleratorwill sound and a message will be displayedpedal depressedon the multi-information display to inform4● When attempting to change the shiftyou that the shift position has been changedposition from N while stopped or drivingto an extremely low speed with the brake■ Automatic P position selection functionDrivingpedal not depressedIn the following situations, the shift position● When attempting to change the shiftis automatically changed to from N while stopped or driving● When pressing the power switch with theat an extremely low speed with the accel-vehicle stopped while the power switch iserator pedal depressedin ON and the shift position is in a posi-● When attempting to change the shifttion other than P (after the shift positionposition from P or N to B *1 or S *2has been changed to P, the power switchwill turn off) *● When the P position switch is pressedwhile driving● If the driver’
187
4-2. Driving procedures
● The shift position cannot be changed
● When attempting to change the shift
*1
*2
position to D while the vehicle is moving
from P to B or S directly.
backward
*1 : Vehicles without paddle shift switches
When driving at a low speed, the shift posi-
*2
: Vehicles with paddle shift switches
tion may change to D.
■ The shift position cannot be changed
● When attempting to change the shift
when
position from R to B *1 or S *2
In the following situations, a buzzer will
*1
: Vehicles without paddle shift switches
sound to inform you that the shift position
*2 : Vehicles with paddle shift switches
cannot be changed. Use the appropriate
operation to attempt to change the shift
■ If the N shift position is selected while
position again.
driving
● When attempting to change the shift
If the shift lever is moved to N while driving
position from P with the brake pedal not
above a certain speed, the shift position will
depressed
change to N without holding the shift lever
● When attempting to change the shift
in the N position. In this situation, a buzzer
position from P with the accelerator
will sound and a message will be displayed
pedal depressed
on the multi-information display to inform
4
● When attempting to change the shift
you that the shift position has been changed
position from N while stopped or driving
to N.
at an extremely low speed with the brake
■ Automatic P position selection function
Driving
pedal not depressed
In the following situations, the shift position
● When attempting to change the shift
is automatically changed to P.
position from N while stopped or driving
● When pressing the power switch with the
at an extremely low speed with the accel-
vehicle stopped while the power switch is
erator pedal depressed
in ON and the shift position is in a posi-
● When attempting to change the shift
tion other than P (after the shift position
position from P or N to B *1 or S *2
has been changed to P, the power switch
will turn off) *
● When the P position switch is pressed
while driving
● If the driver’s door is opened and all of the
When driving at an extremely low speed,
following conditions are met, while the
shift position is in a position other than P:
the shift position may change to P.
• The power switch is in ON.
*1
: Vehicles without paddle shift switches
• The driver is not wearing the seat belt.
• The brake pedal is not depressed.
*2 : Vehicles with paddle shift switches
To start off the vehicle after the shift position
■ The shift position automatically changes
is changed to P, operate the shift lever
to N when
again.
In the following situations, a buzzer will
sound to inform you that the shift position
● When the vehicle is stopped after the
has been changed to N. Use the appropri-
hybrid system has been stopped in an
ate operation to attempt to change the shift
emergency while driving
position again.
● When voltage of the 12-volt battery
● When attempting to change the shift
drops while the shift position is in a posi-
position to R while the vehicle is moving
tion other than P
forward
*
: When the power switch is pressed while
When driving at a low speed, the shift posi-
driving at extremely slow speeds, such as
tion may change to R.
immediately before stopping the vehicle,
1884-2. Driving proceduresthe shift position may automaticallyNOTICEchange to P. Make sure that the vehicle is■ When exiting the vehicle (driver’scompletely stopped before pressing theseat only)power that the shift position indicator■ If the shift position cannot be shiftedshows P and that the parking brake indi-from Pcator is illuminated before opening thedoor and exiting the is a possibility that the 12-volt batteryis discharged. Check the 12-volt battery inthis situation. (P.432)Keeping the shift position in N■ Customizationwithout activating the automaticSome functions can be customized.P position selection function(P.460) By performing the following opera-WARNINGtions, the shift position can be held in■ For the shift leverN until the shift position switches to● Do not remove the shift lever knob orP without activating the automatic Puse anything but a genuine Lexus shiftposition selection knob. Also, do not hang anythingon the shift lever.1 Operate the shift lever and changeDoing so could prevent the shift leverthe shift position to N when thefrom returning to position, causingunexpected accidents to occur whenhybrid system is vehicle is in motion.2 Return the shift lever to its regular● In order to prevent the shift positionposition ().from accidentally being changed, donot touch the shift lever when not using3 Operate the shift lever to N it there until the buzzer■ P position switchsounds.● Do not press the P position switch4 Press the power switch within 5while the vehicle is the P position switch is pressed whenseconds after the buzzer at very low speeds (for exam-ple, directly before stopping the vehi-The hybrid system stops with the shift posi-cle), the vehicle may stop suddenlytion in N. *when the shift position switches to P,Make sure to check that the buzzer soundswhich could lead to an “Holding N Push P Switch WhenDone” is displayed on the multi
188
4-2. Driving procedures
the shift position may automatically
NOTICE
change to P. Make sure that the vehicle is
■ When exiting the vehicle (driver’s
completely stopped before pressing the
seat only)
power switch.
Check that the shift position indicator
■ If the shift position cannot be shifted
shows P and that the parking brake indi-
from P
cator is illuminated before opening the
door and exiting the vehicle.
There is a possibility that the 12-volt battery
is discharged. Check the 12-volt battery in
this situation. (P.432)
Keeping the shift position in N
■ Customization
without activating the automatic
Some functions can be customized.
P position selection function
(P.460)
 By performing the following opera-
WARNING
tions, the shift position can be held in
■ For the shift lever
N until the shift position switches to
● Do not remove the shift lever knob or
P without activating the automatic P
use anything but a genuine Lexus shift
position selection function.
lever knob. Also, do not hang anything
on the shift lever.
1 Operate the shift lever and change
Doing so could prevent the shift lever
the shift position to N when the
from returning to position, causing
unexpected accidents to occur when
hybrid system is operating.
the vehicle is in motion.
2 Return the shift lever to its regular
● In order to prevent the shift position
position (
).
from accidentally being changed, do
not touch the shift lever when not using
3 Operate the shift lever to N and
it.
hold it there until the buzzer
■ P position switch
sounds.
● Do not press the P position switch
4 Press the power switch within 5
while the vehicle is moving.
If the P position switch is pressed when
seconds after the buzzer sounds.
driving at very low speeds (for exam-
ple, directly before stopping the vehi-
The hybrid system stops with the shift posi-
cle), the vehicle may stop suddenly
tion in N. *
when the shift position switches to P,
Make sure to check that the buzzer sounds
which could lead to an accident.
and “Holding N Push P Switch When
Done” is displayed on the multi-informa-
● In order to prevent the shift position
tion display.
from accidentally being changed, do
not touch the P position switch when
 In order to shift to a position other
not using it.
than N, first press the P position
switch to change the shift position to
P.
 Make sure to operate the shift lever
with the hybrid system is operating.
1894-2. Driving proceduresIf the hybrid system is not operating,it may not be possible to hold theshift position in N.*: To keep this state, do not operate thepower switch. If the power switch isoperated repeatedly, the power switchwill turn off after the shift position hasautomatically changed to P.1 UpshiftingSelecting the driving mode2 DownshiftingP.290The selected shift range, from D1 to D6,will be displayed in the return to normal D position driving, theSelecting shift ranges in the D“+” paddle shift switch must be held downposition (vehicles with paddlefor a period of switches)4Meter dis-FunctionTo drive using temporary shift rangeplayDrivingselection, operate the “-” or “+” paddleA gear in the range betweenshift switch when driving with the shiftD1 and the selected shiftposition in D.D2 - D6range is automatically cho-sen depending on vehicleWhen the “-” paddle shift switch isspeed and driving conditionsoperated, the shift range switches to arange that enables engine brakingD1Setting the shift range at D1force that is suitable to driving condi-A lower shift range will provide greatertions. When the “+” paddle shift switchengine braking forces than a higher shiftis operated, the shift range switches torange.a range that is one range higher thanthe current range.■ When the “-” paddle shift switch is oper-ated with the shift position in DChanging the shift range allowsA shift range will be automatically of the highest gear, prevent-The highest gear of the first shift range willing unnecessary upshifting andbe one gear lower than the gear in useenabling the level of engine brakingduring normal D position to be selected.■ Automatic deactivation of shift rangeselection in the D positionShift range selection in the D position willbe deactivated in the following situations:● When the vehicle comes to a stop● If the accelerator pedal is depressed formore than a certain period of time in onegear step
189
4-2. Driving procedures
If the hybrid system is not operating,
it may not be possible to hold the
shift position in N.
*
: To keep this state, do not operate the
power switch. If the power switch is
operated repeatedly, the power switch
will turn off after the shift position has
automatically changed to P.
1 Upshifting
Selecting the driving mode
2 Downshifting
P.290
The selected shift range, from D1 to D6,
will be displayed in the meter.
To return to normal D position driving, the
Selecting shift ranges in the D
“+” paddle shift switch must be held down
position (vehicles with paddle
for a period of time.
shift switches)
4
Meter dis-
Function
To drive using temporary shift range
play
Driving
selection, operate the “-” or “+” paddle
A gear in the range between
shift switch when driving with the shift
D1 and the selected shift
position in D.
D2 - D6
range is automatically cho-
sen depending on vehicle
When the “-” paddle shift switch is
speed and driving conditions
operated, the shift range switches to a
range that enables engine braking
D1
Setting the shift range at D1
force that is suitable to driving condi-
A lower shift range will provide greater
tions. When the “+” paddle shift switch
engine braking forces than a higher shift
is operated, the shift range switches to
range.
a range that is one range higher than
the current range.
■ When the “-” paddle shift switch is oper-
ated with the shift position in D
Changing the shift range allows
A shift range will be automatically selected.
restriction of the highest gear, prevent-
The highest gear of the first shift range will
ing unnecessary upshifting and
be one gear lower than the gear in use
enabling the level of engine braking
during normal D position driving.
force to be selected.
■ Automatic deactivation of shift range
selection in the D position
Shift range selection in the D position will
be deactivated in the following situations:
● When the vehicle comes to a stop
● If the accelerator pedal is depressed for
more than a certain period of time in one
gear step
1904-2. Driving procedures● When the shift position is shifted to aengine braking force than a higherposition other than Dshift range, and the engine revolu-● When the “+” paddle shift switch istions will also and held■ Downshifting restriction warning■ S modebuzzer● When the shift range is 4 or lower, hold-To help ensure safety and driving perfor-ing the shift lever toward “+” sets the shiftmance, downshifting operation may some-range to 6.times be restricted. In some circumstances,● Automatically selects a higher shift rangedownshifting may not be possible evenbefore the engine speed becomes toowhen the shift lever or paddle shift switch . (A buzzer will sound twice.)■ Downshifting restriction warningbuzzerSelecting shift ranges in the STo help ensure safety and driving perfor-mode (vehicles with paddle shiftmance, downshifting operation may some-switches)times be restricted. In some circumstances,downshifting may not be possible evenTo enter S mode, shift the shift positionwhen the shift lever or paddle shift switch isoperated. (A buzzer will sound twice.)to S. Shift ranges can be selected byoperating the shift lever or paddle shiftswitches.1 Upshifting2 DownshiftingThe selected shift range, from S1 to S6, willbe displayed in the initial shift range in S mode is 4 or 5.■ Shift ranges and their functions You can choose from 6 levels ofaccelerating force and engine brak-ing force. A lower shift range will providegreater accelerating force and
190
4-2. Driving procedures
● When the shift position is shifted to a
engine braking force than a higher
position other than D
shift range, and the engine revolu-
● When the “+” paddle shift switch is
tions will also increase.
pressed and held
■ Downshifting restriction warning
■ S mode
buzzer
● When the shift range is 4 or lower, hold-
To help ensure safety and driving perfor-
ing the shift lever toward “+” sets the shift
mance, downshifting operation may some-
range to 6.
times be restricted. In some circumstances,
● Automatically selects a higher shift range
downshifting may not be possible even
before the engine speed becomes too
when the shift lever or paddle shift switch is
high.
operated. (A buzzer will sound twice.)
■ Downshifting restriction warning
buzzer
Selecting shift ranges in the S
To help ensure safety and driving perfor-
mode (vehicles with paddle shift
mance, downshifting operation may some-
switches)
times be restricted. In some circumstances,
downshifting may not be possible even
To enter S mode, shift the shift position
when the shift lever or paddle shift switch is
operated. (A buzzer will sound twice.)
to S. Shift ranges can be selected by
operating the shift lever or paddle shift
switches.
1 Upshifting
2 Downshifting
The selected shift range, from S1 to S6, will
be displayed in the meter.
The initial shift range in S mode is 4 or 5.
■ Shift ranges and their functions
 You can choose from 6 levels of
accelerating force and engine brak-
ing force.
 A lower shift range will provide
greater accelerating force and
1914-2. Driving procedures■ If the turn signals stop flashing before aTurn signal leverlane change has been performedOperate the lever instructionsThe turn signal lever can be used toshow the following intentions of thedriver.4Driving1 Right turn2 Lane change to the right (move thelever partway and release it)The right hand signals will flash 3 times.3 Lane change to the left (move thelever partway and release it)The left hand signals will flash 3 times.4 Left turn■ Turn signals can be operated whenThe power switch is in ON.■ If the indicator flashes faster than usualCheck that a light bulb in the front or rearturn signal lights has not burned out.
191
4-2. Driving procedures
■ If the turn signals stop flashing before a
Turn signal lever
lane change has been performed
Operate the lever again.
Operating instructions
The turn signal lever can be used to
show the following intentions of the
driver.
4
Driving
1 Right turn
2 Lane change to the right (move the
lever partway and release it)
The right hand signals will flash 3 times.
3 Lane change to the left (move the
lever partway and release it)
The left hand signals will flash 3 times.
4 Left turn
■ Turn signals can be operated when
The power switch is in ON.
■ If the indicator flashes faster than usual
Check that a light bulb in the front or rear
turn signal lights has not burned out.
1924-2. Driving proceduresing brakeParking brake• Operate the parking brake switch whiledepressing the brake parking brake can be set or• Using the parking brake automaticreleased automatically or function, the parking brake canIn automatic mode, the parkingbe released by depressing the accelera-tor pedal. When using this function,brake can be set or released auto-slowly depress the accelerator according to shift positionMake sure that the parking brake indicatoroperation. Also, even in automaticlight turn , the parking brake can be set■ Turning the automatic mode onor released the vehicle is stopped, press andhold the parking brake switch until aOperating instructionsmessage is shown on the multi-infor-■ Using the manual modemation displayThe parking brake can be set andreleased the automatic mode is turnedon, the parking brake operates as fol-lows. When the shift position is shiftedfrom P, the parking brake will bereleased, and the parking brakeindicator light will turn off.A U.S.A. When the shift position is shifted toB CanadaP, the parking brake will be set, and1 Push the switch to set the parkingthe parking brake indicator light willbraketurn parking brake indicator light will turnOperate the shift position and P switch with the vehicle stoppedPress and hold the parking brake switch ifan emergency occurs and it is necessary toand the brake pedal the parking brake while driving.2 Pull the switch to release the park-
192
4-2. Driving procedures
ing brake
Parking brake
• Operate the parking brake switch while
depressing the brake pedal.
The parking brake can be set or
• Using the parking brake automatic
released automatically or manually.
release function, the parking brake can
In automatic mode, the parking
be released by depressing the accelera-
tor pedal. When using this function,
brake can be set or released auto-
slowly depress the accelerator pedal.
matically according to shift position
Make sure that the parking brake indicator
operation. Also, even in automatic
light turn off.
mode, the parking brake can be set
■ Turning the automatic mode on
or released manually.
While the vehicle is stopped, press and
hold the parking brake switch until a
Operating instructions
message is shown on the multi-infor-
■ Using the manual mode
mation display
The parking brake can be set and
released manually.
When the automatic mode is turned
on, the parking brake operates as fol-
lows.
 When the shift position is shifted
from P, the parking brake will be
released, and the parking brake
indicator light will turn off.
A U.S.A.
 When the shift position is shifted to
B Canada
P, the parking brake will be set, and
1 Push the switch to set the parking
the parking brake indicator light will
brake
turn on.
The parking brake indicator light will turn
Operate the shift position and P posi-
on.
tion switch with the vehicle stopped
Press and hold the parking brake switch if
an emergency occurs and it is necessary to
and the brake pedal depressed.
operate the parking brake while driving.
2 Pull the switch to release the park-
1934-2. Driving procedures■ Turning the automatic mode off■ If “Parking Brake Unavailable” or “EPBActivation Stopped Incompletely” is dis-While the vehicle is stopped, pull andplayed on the multi-information displayhold the parking brake switch until aOperate the parking brake switch. If themessage is shown on the multi-infor-message does not disappear after operat-ing the switch several times, the system maymation displaybe malfunctioning. Have the vehicleinspected by your Lexus dealer.■ Parking brake operation soundWhen the parking brake operates, a motorsound (whirring sound) may be heard. Thisdoes not indicate a malfunction.■ Parking brake indicator light● Depending on the power switch mode,the parking brake indicator light will turnon and stay on as described below:ON: Comes on until the parking brake isreleased.■ Parking brake operationNot in ON: Stays on for approximately 154seconds.● When the power switch is not in ON, theparking brake cannot be released using● When the power switch is turned off withDrivingthe parking brake parking brake set, the parking brakeindicator light will stay on for about 15● When the power switch is not in ON,seconds. This does not indicate a mal-automatic mode (automatic brake releasing) is not available.■ When the parking brake switch mal-■ Parking brake automatic release func-functionstionAutomatic mode (automatic brake setting● When the shift position is shifted from P,and releasing) will be turned on automati-the parking brake will be released mode.● When all of the following conditions are■ Parking the vehiclemet in manual mode, the parking brakeP.166can be released by depressing the accel-■ Parking brake engaged warning buzzererator pedal.• The driver’s door is closedA buzzer will sound if the vehicle is driven• The driver is wearing the seat beltwith the parking brake engaged. “Parking• The shift position is in D, S or RBrake ON” is displayed on the multi-infor-mation displ
193
4-2. Driving procedures
■ Turning the automatic mode off
■ If “Parking Brake Unavailable” or “EPB
Activation Stopped Incompletely” is dis-
While the vehicle is stopped, pull and
played on the multi-information display
hold the parking brake switch until a
Operate the parking brake switch. If the
message is shown on the multi-infor-
message does not disappear after operat-
ing the switch several times, the system may
mation display
be malfunctioning. Have the vehicle
inspected by your Lexus dealer.
■ Parking brake operation sound
When the parking brake operates, a motor
sound (whirring sound) may be heard. This
does not indicate a malfunction.
■ Parking brake indicator light
● Depending on the power switch mode,
the parking brake indicator light will turn
on and stay on as described below:
ON: Comes on until the parking brake is
released.
■ Parking brake operation
Not in ON: Stays on for approximately 15
4
seconds.
● When the power switch is not in ON, the
parking brake cannot be released using
● When the power switch is turned off with
Driving
the parking brake switch.
the parking brake set, the parking brake
indicator light will stay on for about 15
● When the power switch is not in ON,
seconds. This does not indicate a mal-
automatic mode (automatic brake setting
function.
and releasing) is not available.
■ When the parking brake switch mal-
■ Parking brake automatic release func-
functions
tion
Automatic mode (automatic brake setting
● When the shift position is shifted from P,
and releasing) will be turned on automati-
the parking brake will be released in
cally.
automatic mode.
● When all of the following conditions are
■ Parking the vehicle
met in manual mode, the parking brake
P.166
can be released by depressing the accel-
■ Parking brake engaged warning buzzer
erator pedal.
• The driver’s door is closed
A buzzer will sound if the vehicle is driven
• The driver is wearing the seat belt
with the parking brake engaged. “Parking
• The shift position is in D, S or R
Brake ON” is displayed on the multi-infor-
mation display (with the vehicle reached a
■ If “Parking Brake Temporarily Unavail-
speed of 3 mph [5 km/h]).
able” is displayed on the multi-informa-
tion display
■ If the brake system warning light comes
on
If the parking brake is operated repeatedly
over a short period of time, the system may
P.412
restrict operation to prevent overheating. If
■ Usage in winter time
this happens, refrain from operating the
parking brake. Normal operation will return
P.301
after about 1 minute.
1944-2. Driving proceduresBrake HoldWARNING■ When parking the vehicleThe brake hold system keeps theDo not leave a child in the vehicle parking brake may be released unin-brake applied when the shift posi-tentionally and there is the danger of thetion is in D, B *1 , S *2 , N or P with thevehicle moving that may lead to an acci-dent resulting in death or serious on and the brake pedal hasbeen depressed to stop the system releases the brakeNOTICEwhen the accelerator pedal is■ When parking the vehicledepressed with the shift position inBefore you leave the vehicle, shift theD, B *1 or S *2 to allow smooth startshift position to P, set the parking brakeand make sure that the vehicle does .*1: Vehicles without paddle shift■ When the system malfunctionsswitchesStop the vehicle in a safe place and*2: Vehicles with paddle shift switchescheck the warning messages.■ When the parking brake cannot bereleased due to a malfunctionEnabling the systemDriving the vehicle with the parkingTurn the brake hold system onbrake set will lead to brake componentsoverheating, which may affect brakingThe brake hold standby indicator (green)performance and increase brake wear.A comes on. While the system is holdingHave the vehicle inspected by yourLexus dealer immediately if this brake, the brake hold operated indica-tor (yellow) B comes on.■ Brake hold system operating conditionsThe brake hold system cannot be turned onin the following conditions:● The driver’s door is not closed.● The driver is not wearing the seat belt.● “Parking Brake Unavailable” or “Parking
194
4-2. Driving procedures
Brake Hold
WARNING
■ When parking the vehicle
The brake hold system keeps the
Do not leave a child in the vehicle alone.
The parking brake may be released unin-
brake applied when the shift posi-
tentionally and there is the danger of the
tion is in D, B *1 , S *2 , N or P with the
vehicle moving that may lead to an acci-
dent resulting in death or serious injury.
system on and the brake pedal has
been depressed to stop the vehicle.
The system releases the brake
NOTICE
when the accelerator pedal is
■ When parking the vehicle
depressed with the shift position in
Before you leave the vehicle, shift the
D, B *1 or S *2 to allow smooth start
shift position to P, set the parking brake
and make sure that the vehicle does not
off.
move.
*1
: Vehicles without paddle shift
■ When the system malfunctions
switches
Stop the vehicle in a safe place and
*2
: Vehicles with paddle shift switches
check the warning messages.
■ When the parking brake cannot be
released due to a malfunction
Enabling the system
Driving the vehicle with the parking
Turn the brake hold system on
brake set will lead to brake components
overheating, which may affect braking
The brake hold standby indicator (green)
performance and increase brake wear.
A comes on. While the system is holding
Have the vehicle inspected by your
Lexus dealer immediately if this occurs.
the brake, the brake hold operated indica-
tor (yellow) B comes on.
■ Brake hold system operating conditions
The brake hold system cannot be turned on
in the following conditions:
● The driver’s door is not closed.
● The driver is not wearing the seat belt.
● “Parking Brake Unavailable” or “Parking
1954-2. Driving proceduresBrake Malfunction Visit Your Dealer” isMake sure that the parking brake indicatordisplayed on the multi-information dis-light goes off. (P.192)play.■ When an inspection at your LexusIf any of the conditions above are detecteddealer is necessarywhen the brake hold system is enabled, theWhen the brake hold standby indicatorsystem will turn off and the brake hold(green) does not illuminate even when thestandby indicator light will go off. In addi-brake hold switch is pressed with the braketion, if any of the conditions are detectedhold system operating conditions met, thewhile the system is holding the brake, asystem may be malfunctioning. Have thewarning buzzer will sound and a messagevehicle inspected at your Lexus be shown on the multi-information dis-play. The parking brake will then be set■ If “Brake Hold Malfunction Press Deactivate Visit Your Dealer” or“Brake Hold Malfunction Visit Your■ Brake hold functionDealer” is displayed on the multi-infor-● If the brake pedal is left released for amation displayperiod of about 3 minutes after the sys-The system may be malfunctioning. Havetem has started holding the brake, thethe vehicle inspected by your Lexus brake will be set automatically. Inthis case, a warning buzzer sounds and a■ Warning messages and buzzersmessage is shown on the multi-informa-4Warning messages and buzzers are used totion a system malfunction or to inform● To turn the system off while the system isthe driver of the need for caution. If a warn-Drivingholding the brake, firmly depress theing message is shown on the multi-informa-brake pedal and press the button display, read the message and follow● The brake hold function may not hold thethe when the vehicle is on a steep■ If the brake hold operated indicatorincline. In this situation, it may be neces-flashessary for the driver to apply the brakes. AP.413warning buzzer will so
195
4-2. Driving procedures
Brake Malfunction Visit Your Dealer” is
Make sure that the parking brake indicator
displayed on the multi-information dis-
light goes off. (P.192)
play.
■ When an inspection at your Lexus
If any of the conditions above are detected
dealer is necessary
when the brake hold system is enabled, the
When the brake hold standby indicator
system will turn off and the brake hold
(green) does not illuminate even when the
standby indicator light will go off. In addi-
brake hold switch is pressed with the brake
tion, if any of the conditions are detected
hold system operating conditions met, the
while the system is holding the brake, a
system may be malfunctioning. Have the
warning buzzer will sound and a message
vehicle inspected at your Lexus dealer.
will be shown on the multi-information dis-
play. The parking brake will then be set
■ If “Brake Hold Malfunction Press Brake
automatically.
to Deactivate Visit Your Dealer” or
“Brake Hold Malfunction Visit Your
■ Brake hold function
Dealer” is displayed on the multi-infor-
● If the brake pedal is left released for a
mation display
period of about 3 minutes after the sys-
The system may be malfunctioning. Have
tem has started holding the brake, the
the vehicle inspected by your Lexus dealer.
parking brake will be set automatically. In
this case, a warning buzzer sounds and a
■ Warning messages and buzzers
message is shown on the multi-informa-
4
Warning messages and buzzers are used to
tion display.
indicate a system malfunction or to inform
● To turn the system off while the system is
the driver of the need for caution. If a warn-
Driving
holding the brake, firmly depress the
ing message is shown on the multi-informa-
brake pedal and press the button again.
tion display, read the message and follow
● The brake hold function may not hold the
the instructions.
vehicle when the vehicle is on a steep
■ If the brake hold operated indicator
incline. In this situation, it may be neces-
flashes
sary for the driver to apply the brakes. A
P.413
warning buzzer will sound and the multi-
information display will inform the driver
of this situation. If a warning message is
WARNING
shown on the multi-information display,
read the message and follow the instruc-
■ When the vehicle is on a steep incline
tions.
Take care when using the brake hold sys-
● When do not wish for the parking brake
tem on a steep incline, exercise caution.
to operate automatically, press and hold
The brake hold function may not hold
the brake hold switch until the standby
brakes in such situations.
indicator (green) turns off, and then turn
Also, the system may not activate
the power switch off.
depending on the angle of the slope.
■ When the parking brake is set automati-
■ When stopped on a slippery road
cally while the system is holding the
The system cannot stop the vehicle when
brakes
the gripping ability of the tires has been
Perform any of the following operations to
exceeded. Do not use the system when
release the parking brake.
stopped on a slippery road.
● Depress the accelerator pedal. (The
parking brake will not be released auto-
matically if the seat belt is not fastened.)
● Operate the parking brake switch with
the brake pedal depressed.
1964-2. Driving proceduresASC (Active Sound Con-NOTICEtrol) *■ When parking the vehicleThe brake hold system is not designed* : If equippedfor use when parking the vehicle for along period of time. Turning the powerThe ASC system directs certainswitch off while the system is holding thesounds from the front of the cabinbrake may release the brake, whichwould cause the vehicle to move. Whento the vehicle interior, and harmo-operating the power switch, depress thenizes these sounds with the actualbrake pedal, shift the shift position to Psound of the engine and exhaust inand set the parking to allow the driver to feelacceleration and the state of theengine more ASC system onPress the ASC indicator on the switch will turn the ASC switch again to turn theASC system if the indicator is illuminated, whenthe driving mode (P.290) is set to Ecodrive mode or Custom mode (power/traincontrol is set to “ECO”), or EV drive mode(P.182) is turned on, ASC system doesnot operate.■ Operating conditionsThe ASC system operates when all of thefollowing conditions are met.● EV drive mode (P.182) is turned off● The driving mode (P.290) is set toother than Eco drive mode or Custom
196
4-2. Driving procedures
ASC (Active Sound Con-
NOTICE
trol) *
■ When parking the vehicle
The brake hold system is not designed
* : If equipped
for use when parking the vehicle for a
long period of time. Turning the power
The ASC system directs certain
switch off while the system is holding the
sounds from the front of the cabin
brake may release the brake, which
would cause the vehicle to move. When
to the vehicle interior, and harmo-
operating the power switch, depress the
nizes these sounds with the actual
brake pedal, shift the shift position to P
sound of the engine and exhaust in
and set the parking brake.
order to allow the driver to feel
acceleration and the state of the
engine more strongly.
Turning ASC system on
Press the ASC switch.
The indicator on the switch will turn on.
Press the ASC switch again to turn the
ASC system off.
Even if the indicator is illuminated, when
the driving mode (P.290) is set to Eco
drive mode or Custom mode (power/train
control is set to “ECO”), or EV drive mode
(P.182) is turned on, ASC system does
not operate.
■ Operating conditions
The ASC system operates when all of the
following conditions are met.
● EV drive mode (P.182) is turned off
● The driving mode (P.290) is set to
other than Eco drive mode or Custom
1974-2. Driving proceduresmode (power/train control is set to“ECO”)4Driving
197
4-2. Driving procedures
mode (power/train control is set to
“ECO”)
4
Driving
1984-3. Operating the lights and wiperslights listed above turn on and the lights and wipersHeadlight headlights can be operated4(U.S.A.) Offmanually or automatically.■ AUTO mode can be used whenThe power switch is in on the headlights■ Daytime running light system● The daytime running lights illuminate theOperating theswitch turns onparking lights and illuminate brighter thanthe lights as follows:the parking lights.● To make your vehicle more visible toother drivers during daytime driving, thedaytime running lights turn on automati-cally when all of the following conditionsare met. (The daytime running lights arenot designed for use at night.)• The hybrid system is started• The parking brake is released• The headlight switch is in theor(when the surroundings are bright) posi-tionThe daytime running lights remain on afterthey illuminate due to the conditions above,even if the parking brake is set again.● For the U.S.A.: Daytime running lightscan be turned off by operating the head-light switch toposition.● Compared to turning on the headlights,the daytime running light system offersA durability and consumes lesselectricity, so it can help improve fuelB Canadaeconomy.1The side marker, parking, tail,■ Headlight control sensorlicense plate, instrument panelThe sensor may not function properly if anobject is placed on the sensor, or anythinglights, and daytime running lightsthat blocks the sensor is affixed to the wind-(P.198) turn so interferes with the sensor detect-2The headlights and all theing the level of ambient light and may causelights listed above (except daytimethe automatic headlight system to lights) turn on.3The headlights, daytime run-ning lights (P.198) and all the
198
4-3. Operating the lights and wipers
lights listed above turn on and off
4-3.Operating the lights and wipers
Headlight switch
automatically.
The headlights can be operated
4
(U.S.A.) Off
manually or automatically.
■ AUTO mode can be used when
The power switch is in ON.
Turning on the headlights
■ Daytime running light system
● The daytime running lights illuminate the
Operating the
switch turns on
parking lights and illuminate brighter than
the lights as follows:
the parking lights.
● To make your vehicle more visible to
other drivers during daytime driving, the
daytime running lights turn on automati-
cally when all of the following conditions
are met. (The daytime running lights are
not designed for use at night.)
• The hybrid system is started
• The parking brake is released
• The headlight switch is in the
or
(when the surroundings are bright) posi-
tion
The daytime running lights remain on after
they illuminate due to the conditions above,
even if the parking brake is set again.
● For the U.S.A.: Daytime running lights
can be turned off by operating the head-
light switch to
position.
● Compared to turning on the headlights,
the daytime running light system offers
A U.S.A.
greater durability and consumes less
electricity, so it can help improve fuel
B Canada
economy.
1
The side marker, parking, tail,
■ Headlight control sensor
license plate, instrument panel
The sensor may not function properly if an
object is placed on the sensor, or anything
lights, and daytime running lights
that blocks the sensor is affixed to the wind-
(P.198) turn on.
shield.
Doing so interferes with the sensor detect-
2
The headlights and all the
ing the level of ambient light and may cause
lights listed above (except daytime
the automatic headlight system to malfunc-
tion.
running lights) turn on.
3
The headlights, daytime run-
ning lights (P.198) and all the
1994-3. Operating the lights and wipersseconds to help enhance the visibility ofyour vehicle.■ 12-volt battery-saving functionIn order to prevent the 12-volt battery of thevehicle from discharging, if the headlightsand/or tail lights are on when the powerswitch is turned off the 12-volt battery sav-ing function will operate and automatically■ Automatic light off systemturn off all the lights after approximately 20minutes. When the power switch is turned● When the headlights come on: The head-to ON, the 12-volt battery-saving functionlights and tail lights turn off 30 secondswill be the driver’s door is opened andWhen any of the following are performed,closed if the power switch is turned tothe 12-volt battery-saving function is can-OFF. (The lights turn off immediately ifceled once and then reactivated. All thelights will turn off automatically 20 minuteson the key is pressed after all theafter the 12-volt battery-saving function hasdoors are locked.)been reactivated:● When only the tail lights come on: The tail● When the headlight switch is operated4lights turn off automatically if the power● When a door is opened or closedswitch is turned to OFF. and the driver’s■ Welcome light illumination controldoor is parking and tail lights automaticallyExcept for Canada: To turn the lights onturn on at night when the doors areagain, turn the power switch to ON, or turnunlocked using the entry function or wire-the light switch off once and then back toless remote control if the light switch is Canada: To turn the lights on again, turnthe power switch to ON, or turn the light■ If “Headlight System Malfunction VisitYour Dealer” is displayed on the multi-switch toonce and then back toinformation displayThe system may be malfunctioning. vehicle inspected by your Lexus dealer.■ Automatic headlight leveling system (if■ Customizationequipped)Settings (e.g. light sensor sensitivity) can beThe level of the headlights is
199
4-3. Operating the lights and wipers
seconds to help enhance the visibility of
your vehicle.
■ 12-volt battery-saving function
In order to prevent the 12-volt battery of the
vehicle from discharging, if the headlights
and/or tail lights are on when the power
switch is turned off the 12-volt battery sav-
ing function will operate and automatically
■ Automatic light off system
turn off all the lights after approximately 20
minutes. When the power switch is turned
● When the headlights come on: The head-
to ON, the 12-volt battery-saving function
lights and tail lights turn off 30 seconds
will be disabled.
after the driver’s door is opened and
When any of the following are performed,
closed if the power switch is turned to
the 12-volt battery-saving function is can-
OFF. (The lights turn off immediately if
celed once and then reactivated. All the
lights will turn off automatically 20 minutes
on the key is pressed after all the
after the 12-volt battery-saving function has
doors are locked.)
been reactivated:
● When only the tail lights come on: The tail
● When the headlight switch is operated
4
lights turn off automatically if the power
● When a door is opened or closed
switch is turned to OFF. and the driver’s
■ Welcome light illumination control
door is opened.
Driving
The parking and tail lights automatically
Except for Canada: To turn the lights on
turn on at night when the doors are
again, turn the power switch to ON, or turn
unlocked using the entry function or wire-
the light switch off once and then back to
less remote control if the light switch is in
or
.
the
position.
For Canada: To turn the lights on again, turn
the power switch to ON, or turn the light
■ If “Headlight System Malfunction Visit
Your Dealer” is displayed on the multi-
switch to
once and then back to
information display
The system may be malfunctioning. Have
or
.
the vehicle inspected by your Lexus dealer.
■ Automatic headlight leveling system (if
■ Customization
equipped)
Settings (e.g. light sensor sensitivity) can be
The level of the headlights is automatically
changed. (Customizable features:
adjusted according to the number of pas-
P.460)
sengers and the loading condition of the
vehicle to ensure that the headlights do not
NOTICE
interfere with other road users.
■ Windshield wiper linked headlight illu-
■ To prevent 12-volt battery discharge
mination
Do not leave the lights on longer than
When driving during daytime with the
necessary when the hybrid system is not
operating.
headlight switch turned to
position, if
the windshield wipers are used, the head-
lights will turn on automatically after several
2004-3. Operating the lights and wipersspeed is approximately 19 mph (30Turning on the high beam head-km/h) or less. However, the lights turn offlightswhen the vehicle speed increases toapproximately 22 mph (35 km/h) ormore.● After the lights remain illuminated for 30minutes, they automatically turn off.1 With the headlights on, push thelever away from you to turn on thehigh the lever toward you to the centerposition to turn the high beams off.2 Pull the lever toward you andrelease it to flash the high can flash the high beams with theheadlights on or lights (if equipped)When any of the following conditions ismet, while the headlights (low beam)are on, the cornering lights will addi-tionally turn on and light up the direc-tion of movement for the vehicle. This isto ensure excellent visibility wheneither driving at intersections or park-ing at night. The steering wheel is operated The turn signal lever is operated The shift position is in R (both leftand right side cornering lights)■ Cornering light control● The lights illuminate when the vehicle
200
4-3. Operating the lights and wipers
speed is approximately 19 mph (30
Turning on the high beam head-
km/h) or less. However, the lights turn off
lights
when the vehicle speed increases to
approximately 22 mph (35 km/h) or
more.
● After the lights remain illuminated for 30
minutes, they automatically turn off.
1 With the headlights on, push the
lever away from you to turn on the
high beams.
Pull the lever toward you to the center
position to turn the high beams off.
2 Pull the lever toward you and
release it to flash the high beams
once.
You can flash the high beams with the
headlights on or off.
Cornering lights (if equipped)
When any of the following conditions is
met, while the headlights (low beam)
are on, the cornering lights will addi-
tionally turn on and light up the direc-
tion of movement for the vehicle. This is
to ensure excellent visibility when
either driving at intersections or park-
ing at night.
 The steering wheel is operated
 The turn signal lever is operated
 The shift position is in R (both left
and right side cornering lights)
■ Cornering light control
● The lights illuminate when the vehicle
2014-3. Operating the lights and wipersWhen the headlight switch lever is in theAHB (Automatic Highlow beam position, the AHB system will beBeam)enabled and the AHB indicator will Automatic High Beam uses afront camera located on the upperportion of the windshield to detectthe brightness of the lights of vehi-cles ahead, streetlights, etc., andautomatically changes the headlights between the high beams andlow beams.■ Automatic operating conditions of theWARNINGhigh beams■ For safe use● When all of the following conditions areDo not overly rely on the Automaticmet, the high beams will illuminate auto-4High Beam. Always drive safely, takingmatically:care to observe your surroundings and• The vehicle speed is approximately 21turning the high beams on or off manu-mph (34 km/h) or if necessary.• The area ahead of the vehicle is dark.• There are no vehicles ahead with lights■ To prevent unintentional operation Automatic High Beam system• There are few streetlights or other lightsWhen it is necessary to disable the sys-on the road P.215● If any of the following conditions are met,the headlights will change to the lowbeams:Using the Automatic High Beam• Vehicle speed drops below approxi-systemmately 17 mph (27 km/h).• The area ahead of the vehicle is not dark.• There is a vehicle ahead with lights on.1 Press the Automatic High Beam• There are many streetlights or on the road ahead.■ Front camera detection● In the following situations, the high beamsmay not be automatically changed to thelow beams:• When a vehicle cuts in front of your vehi-cle• When another vehicle crosses in front ofthe vehicle• When vehicles ahead are repeatedlydetected and then hidden due torepeated curves, road dividers or road-2 Turn the headlight switch to theside trees• When a vehicle ahead approaches fromorposition.a far lane• When a vehicle ahead is far away
201
4-3. Operating the lights and wipers
When the headlight switch lever is in the
AHB (Automatic High
low beam position, the AHB system will be
Beam)
enabled and the AHB indicator will illumi-
nate.
The Automatic High Beam uses a
front camera located on the upper
portion of the windshield to detect
the brightness of the lights of vehi-
cles ahead, streetlights, etc., and
automatically changes the head
lights between the high beams and
low beams.
■ Automatic operating conditions of the
WARNING
high beams
■ For safe use
● When all of the following conditions are
Do not overly rely on the Automatic
met, the high beams will illuminate auto-
4
High Beam. Always drive safely, taking
matically:
care to observe your surroundings and
• The vehicle speed is approximately 21
turning the high beams on or off manu-
mph (34 km/h) or more.
Driving
ally if necessary.
• The area ahead of the vehicle is dark.
• There are no vehicles ahead with lights
■ To prevent unintentional operation of
on.
the Automatic High Beam system
• There are few streetlights or other lights
When it is necessary to disable the sys-
on the road ahead.
tem P.215
● If any of the following conditions are met,
the headlights will change to the low
beams:
Using the Automatic High Beam
• Vehicle speed drops below approxi-
system
mately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• There is a vehicle ahead with lights on.
1 Press the Automatic High Beam
• There are many streetlights or other
switch.
lights on the road ahead.
■ Front camera detection
● In the following situations, the high beams
may not be automatically changed to the
low beams:
• When a vehicle cuts in front of your vehi-
cle
• When another vehicle crosses in front of
the vehicle
• When vehicles ahead are repeatedly
detected and then hidden due to
repeated curves, road dividers or road-
2 Turn the headlight switch to the
side trees
• When a vehicle ahead approaches from
or
position.
a far lane
• When a vehicle ahead is far away
2024-3. Operating the lights and wipers• When a vehicle ahead has no lightslow beams.• When the lights of a vehicle ahead are• When use of the high beams is inappro-dimpriate or when the high beams may be• When a vehicle ahead is reflecting strongflashing or dazzling pedestrians or otherlight, such as own headlightsdrivers.• Situations in which the sensors may not• When the vehicle is used in an area inoperate properly P.218which vehicles travel on the opposite sideof the road of the country for which the● The headlights may change to the lowvehicle was designed, for example usingbeams if a vehicle ahead that is using foga vehicle designed for right-hand traffic inlights without its headlights turned on isa left-hand traffic area, or vice versadetected.• When it is necessary to disable the sys-● House lights, street lights, traffic signals,tem P.215and illuminated billboards or signs may• Situations in which the sensors may notcause the high beams to change to theoperate properly P.218low beams, or the low beams to remain■ Temporarily reducing front camera ● The following may change the timing atThe sensitivity of the front camera can bewhich the headlights change to the lowtemporarily Turn the power switch off with the fol-• The brightness of lights of vehicles aheadlowing conditions met.• The movement and direction of vehiclesahead● The headlight switch is inor• The distance between the vehicle and avehicle aheadposition.• When a vehicle ahead only has lights illu-● The headlight switch lever is in the lowminated on one sidebeam position.• When a vehicle ahead is a two-wheeledvehicle● The Automatic High Beam switch is on.• The condition of the road (gradient,2 Turn the power switch to , condition of the road surface, etc.)3 Within 60 seconds after performing• The number of passengers and amount ofstep 2, push the headlight switch leverluggageto the high beam position then pull it to● The headlights may change between theth
202
4-3. Operating the lights and wipers
• When a vehicle ahead has no lights
low beams.
• When the lights of a vehicle ahead are
• When use of the high beams is inappro-
dim
priate or when the high beams may be
• When a vehicle ahead is reflecting strong
flashing or dazzling pedestrians or other
light, such as own headlights
drivers.
• Situations in which the sensors may not
• When the vehicle is used in an area in
operate properly P.218
which vehicles travel on the opposite side
of the road of the country for which the
● The headlights may change to the low
vehicle was designed, for example using
beams if a vehicle ahead that is using fog
a vehicle designed for right-hand traffic in
lights without its headlights turned on is
a left-hand traffic area, or vice versa
detected.
• When it is necessary to disable the sys-
● House lights, street lights, traffic signals,
tem P.215
and illuminated billboards or signs may
• Situations in which the sensors may not
cause the high beams to change to the
operate properly P.218
low beams, or the low beams to remain
■ Temporarily reducing front camera sen-
on.
sitivity
● The following may change the timing at
The sensitivity of the front camera can be
which the headlights change to the low
temporarily reduced.
beams:
1 Turn the power switch off with the fol-
• The brightness of lights of vehicles ahead
lowing conditions met.
• The movement and direction of vehicles
ahead
● The headlight switch is in
or
• The distance between the vehicle and a
vehicle ahead
position.
• When a vehicle ahead only has lights illu-
● The headlight switch lever is in the low
minated on one side
beam position.
• When a vehicle ahead is a two-wheeled
vehicle
● The Automatic High Beam switch is on.
• The condition of the road (gradient,
2 Turn the power switch to ON.
curve, condition of the road surface, etc.)
3 Within 60 seconds after performing
• The number of passengers and amount of
step 2, push the headlight switch lever
luggage
to the high beam position then pull it to
● The headlights may change between the
the original position quickly 10 times,
high beams and low beams unexpect-
then leave the lever in the original posi-
edly.
tion.
● Bicycles and other small vehicles may not
4 If the sensitivity is changed, the Auto-
be detected.
matic High Beam indicator will blink 3
times.
● In the following situations, the system may
not be able to correctly detect the bright-
ness of the surroundings. This may cause
Turning the high beams on/off
the low beams to remain on or the high
manually
beams to flash or dazzle pedestrians or
vehicles ahead. In such a case, it is neces-
sary to manually change between the
■ Changing to the high beams
high beams and low beams.
Push the lever forward.
• When there are lights similar to head-
lights or tail lights in the surrounding area
The AHB indicator will turn off and the
• When headlights or tail lights of vehicles
high beam indicator will turn on.
ahead are turned off, dirty, changing
color, or not aimed properly
Pull the lever to its original position to
• When the headlights are repeatedly
enable the Automatic High Beam system
changing between the high beams and
2034-3. Operating the lights and system will operate.■ Changing to the low beamsPress the Automatic High AHB indicator will turn the switch to enable the Automatic4High Beam system changing to the lowbeamsIt is recommended to switch to the lowbeams when use of the high beams isinappropriate or when the high beamsmay cause problems or distress toother drivers or pedestrians the lever rearward and then return it toits original high beams will illuminate while thelever is pulled, however, after the lever isreturned to its original position, the lowbeams will remain on for a certain amountof time. After this, the Automatic High
203
4-3. Operating the lights and wipers
again.
Beam system will operate.
■ Changing to the low beams
Press the Automatic High Beam
switch.
The AHB indicator will turn off.
Press the switch to enable the Automatic
4
High Beam system again.
Driving
Temporarily changing to the low
beams
It is recommended to switch to the low
beams when use of the high beams is
inappropriate or when the high beams
may cause problems or distress to
other drivers or pedestrians nearby.
Pull the lever rearward and then return it to
its original position.
The high beams will illuminate while the
lever is pulled, however, after the lever is
returned to its original position, the low
beams will remain on for a certain amount
of time. After this, the Automatic High
2044-3. Operating the lights and wipersFog light switch *NOTICE■ To prevent 12-volt battery discharge*: If equippedDo not leave the lights on longer thanWhen in difficult driving conditions,necessary when the hybrid system is as in rain and fog, turn on thefog lights to secure front on the fog light*1*21orTurns the foglights off2Turns the fog lights on*1: For the U.S.A.*2: For Canada■ Fog lights can be used whenThe headlights are on in low beam.
204
4-3. Operating the lights and wipers
Fog light switch *
NOTICE
■ To prevent 12-volt battery discharge
*
: If equipped
Do not leave the lights on longer than
When in difficult driving conditions,
necessary when the hybrid system is off.
such as in rain and fog, turn on the
fog lights to secure front visibility.
Turning on the fog light
*1
*2
1
or
Turns the fog
lights off
2
Turns the fog lights on
*1
: For the U.S.A.
*2
: For Canada
■ Fog lights can be used when
The headlights are on in low beam.
2054-3. Operating the lights and wipers*1*23orLow speed oper-Windshield wipers andationwasher*1*24orHigh speed oper-Operating the lever can changeationwiper operation to automatic/man-*1*25orTemporary oper-ual or squirt washer *1 : For the *2: For Canada■ When the windshield is dryDo not use the wipers, as they may dam-Wiper intervals can be adjusted whenage the operation is the wiper leverOperating thelever operates4the wipers or washer as follows: Intermittent windshield wipers withDrivinginterval adjuster6 Increases the intermittent wind-shield wiper frequency7 Decreases the intermittent wind-shield wiper frequency8Washer/wiper dual opera-tion*1*21orOffPulling the lever operates the wipers andwasher.*1*22orIntermittentThe wipers will automatically operate aoperationcouple of times after the washer squirts.
205
4-3. Operating the lights and wipers
*1
*2
3
or
Low speed oper-
Windshield wipers and
ation
washer
*1
*2
4
or
High speed oper-
Operating the lever can change
ation
wiper operation to automatic/man-
*1
*2
5
or
Temporary oper-
ual or squirt washer fluid.
ation
*1 : For the U.S.A.
NOTICE
*2
: For Canada
■ When the windshield is dry
Do not use the wipers, as they may dam-
Wiper intervals can be adjusted when
age the windshield.
intermittent operation is selected.
Operating the wiper lever
Operating the
lever operates
4
the wipers or washer as follows:
 Intermittent windshield wipers with
Driving
interval adjuster
6 Increases the intermittent wind-
shield wiper frequency
7 Decreases the intermittent wind-
shield wiper frequency
8
Washer/wiper dual opera-
tion
*1
*2
1
or
Off
Pulling the lever operates the wipers and
washer.
*1
*2
2
or
Intermittent
The wipers will automatically operate a
operation
couple of times after the washer squirts.
2064-3. Operating the lights and wipers*1Vehicles with headlight cleaners:: For the the power switch is in ON and the*2: For Canadaheadlights are on, if the lever is pulled, theWhen AUTO is selected, the sensorheadlight cleaners will operate once. Aftersensitivity can be adjusted by turningthis, the headlight cleaners will operatethe switch 5th time the lever is pulled. Rain-sensing windshield wipersWhen AUTO is selected, the wiperswill operate automatically when thesensor detects falling rain. The systemautomatically adjusts wiper timing inaccordance with rain volume and vehi-cle speed.6 Increases the sensitivity7 Decreases the sensitivity8Washer/wiper dual opera-tionPulling the lever operates the wipers wipers will automatically operate a*1 or*2 Off1couple of times after the washer squirts.(After operating several times, the wipers2Rain-sensing operationoperate once more time after a short delay*1*23orLow speed oper-to prevent dripping. However, the drippingationprevention does not operate while thevehicle is moving.)*1*24orHigh speed oper-Vehicles with headlight cleaners: Whenationthe power switch is in ON and the head-*1*25orTemporary oper-lights are on, if the lever is pulled, the head-light cleaners will operate once. After this,ationthe headlight cleaners will operate every
206
4-3. Operating the lights and wipers
*1
Vehicles with headlight cleaners:
: For the U.S.A.
When the power switch is in ON and the
*2
: For Canada
headlights are on, if the lever is pulled, the
When AUTO is selected, the sensor
headlight cleaners will operate once. After
sensitivity can be adjusted by turning
this, the headlight cleaners will operate
the switch ring.
every 5th time the lever is pulled.
 Rain-sensing windshield wipers
When AUTO is selected, the wipers
will operate automatically when the
sensor detects falling rain. The system
automatically adjusts wiper timing in
accordance with rain volume and vehi-
cle speed.
6 Increases the sensitivity
7 Decreases the sensitivity
8
Washer/wiper dual opera-
tion
Pulling the lever operates the wipers and
washer.
The wipers will automatically operate a
*1 or
*2 Off
1
couple of times after the washer squirts.
(After operating several times, the wipers
2
Rain-sensing operation
operate once more time after a short delay
*1
*2
3
or
Low speed oper-
to prevent dripping. However, the dripping
ation
prevention does not operate while the
vehicle is moving.)
*1
*2
4
or
High speed oper-
Vehicles with headlight cleaners: When
ation
the power switch is in ON and the head-
*1
*2
5
or
Temporary oper-
lights are on, if the lever is pulled, the head-
light cleaners will operate once. After this,
ation
the headlight cleaners will operate every
2074-3. Operating the lights and wipers5th time the lever is any mode other than AUTO mode.■ If no windshield washer fluid sprays■ The windshield wipers and washer canCheck that the washer nozzles are notbe operated whenblocked, if there is washer fluid in theThe power switch is in fluid tank.■ Using the voice control system (if■ Front door opening linked windshieldwiper stop functionequipped)The following operations can be performedWhen AUTO is selected and the wind-shield wipers are operating, if a front door isusing the voice control system:opened, the operation of the windshield● Operating the windshield wipers onlywipers will be stopped to prevent anyoneoncenear the vehicle from being sprayed by● Operating the windshield cleaningwater from the wipers, provided the vehiclewasher (it can be performed only whenis stopped with the parking brake applied orthe vehicle is stopped)the shift position in P. When the front dooris closed, wiper operation will details regarding the voice control sys-tem, refer to “MULTIMEDIA OWNER’SMANUAL”.WARNING4■ Effects of vehicle speed on wiper opera-■ Caution regarding the use of wind-tion (vehicles with rain-sensing wind-shield wipers in AUTO mode (vehi-shield wipers)cles with rain-sensing windshieldDrivingVehicle speed affects the Intermittent wiperwipers) windshield wipers may operate■ Raindrop sensor (vehicles with rain-unexpectedly if the sensor is touched orsensing windshield wipers)the windshield is subject to vibration inAUTO mode. Take care that your fin-● The raindrop sensor judges the amountgers, etc. do not become caught in theof optical sensor is adopted. It may notoperate properly when sunlight from the■ Caution regarding the use of washerrising or setting of the sun intermittentlyfluidstrikes the windshield, or if bugs, etc. areWhen it is cold, do not use the washerpresent on the until the windshield becomes fluid may fre
207
4-3. Operating the lights and wipers
5th time the lever is pulled.
in any mode other than AUTO mode.
■ If no windshield washer fluid sprays
■ The windshield wipers and washer can
Check that the washer nozzles are not
be operated when
blocked, if there is washer fluid in the
The power switch is in ON.
washer fluid tank.
■ Using the voice control system (if
■ Front door opening linked windshield
wiper stop function
equipped)
The following operations can be performed
When AUTO is selected and the wind-
shield wipers are operating, if a front door is
using the voice control system:
opened, the operation of the windshield
● Operating the windshield wipers only
wipers will be stopped to prevent anyone
once
near the vehicle from being sprayed by
● Operating the windshield cleaning
water from the wipers, provided the vehicle
washer (it can be performed only when
is stopped with the parking brake applied or
the vehicle is stopped)
the shift position in P. When the front door
is closed, wiper operation will resume.
For details regarding the voice control sys-
tem, refer to “MULTIMEDIA OWNER’S
MANUAL”.
WARNING
4
■ Effects of vehicle speed on wiper opera-
■ Caution regarding the use of wind-
tion (vehicles with rain-sensing wind-
shield wipers in AUTO mode (vehi-
shield wipers)
cles with rain-sensing windshield
Driving
Vehicle speed affects the Intermittent wiper
wipers)
interval.
The windshield wipers may operate
■ Raindrop sensor (vehicles with rain-
unexpectedly if the sensor is touched or
sensing windshield wipers)
the windshield is subject to vibration in
AUTO mode. Take care that your fin-
● The raindrop sensor judges the amount
gers, etc. do not become caught in the
of raindrops.
windshield wipers.
An optical sensor is adopted. It may not
operate properly when sunlight from the
■ Caution regarding the use of washer
rising or setting of the sun intermittently
fluid
strikes the windshield, or if bugs, etc. are
When it is cold, do not use the washer
present on the windshield.
fluid until the windshield becomes warm.
The fluid may freeze on the windshield
and cause low visibility. This may lead to
an accident, resulting in death or serious
injury.
NOTICE
■ When the washer fluid tank is empty
● If the wiper switch is turned to the AUTO
Do not operate the switch continually as
position while the power switch is in ON,
the washer fluid pump may overheat.
the wipers will operate once to show that
AUTO mode is activated.
■ When a nozzle becomes blocked
● If the temperature of the raindrop sensor
In this case, contact your Lexus dealer.
is 194°F (90°C) or higher, or 5°F (-
Do not try to clear it with a pin or other
15°C) or lower, automatic operation may
object. The nozzle will be damaged.
not occur. In this case, operate the wipers
2084-3. Operating the lights and wipersNOTICE■ To prevent 12-volt battery dischargeDo not leave the wipers on longer thannecessary when the hybrid system is the windshield wiperrest position/Lifting the wind-shield wipersWhen the windshield wipers are notbeing used, they retract to below thehood. To enable the windshield wipersto be lifted when parking in cold condi-tions or when replacing a windshieldwiper insert, change the rest position ofthe windshield wipers to the serviceposition using the wiper lever.■ Lifting the windshield wipers■ Raising the wipers to the serviceWhile holding the hook portion A ofpositionthe wiper arm, lift the windshield wiperfrom the approximately 45 seconds ofturning the power switch off, move thewiper lever to the(U.S.A.) or(Canada) position and hold it forapproximately 2 seconds or wipers will move to the service posi-tion.■ Lowering the windshield wipers to theretracted positionWith the windshield wipers placed on thewindshield, turn the power switch to ONand then move the wiper lever to an operat-ing position. When the wiper switch isturned off, the windshield wipers will stop atthe retracted position. Even if the wipersdeviate while the power switch is OFF, thewipers will return to the normal position.
208
4-3. Operating the lights and wipers
NOTICE
■ To prevent 12-volt battery discharge
Do not leave the wipers on longer than
necessary when the hybrid system is off.
Changing the windshield wiper
rest position/Lifting the wind-
shield wipers
When the windshield wipers are not
being used, they retract to below the
hood. To enable the windshield wipers
to be lifted when parking in cold condi-
tions or when replacing a windshield
wiper insert, change the rest position of
the windshield wipers to the service
position using the wiper lever.
■ Lifting the windshield wipers
■ Raising the wipers to the service
While holding the hook portion A of
position
the wiper arm, lift the windshield wiper
from the windshield.
Within approximately 45 seconds of
turning the power switch off, move the
wiper lever to the
(U.S.A.) or
(Canada) position and hold it for
approximately 2 seconds or more.
The wipers will move to the service posi-
tion.
■ Lowering the windshield wipers to the
retracted position
With the windshield wipers placed on the
windshield, turn the power switch to ON
and then move the wiper lever to an operat-
ing position. When the wiper switch is
turned off, the windshield wipers will stop at
the retracted position. Even if the wipers
deviate while the power switch is OFF, the
wipers will return to the normal position.
2094-3. Operating the lights and wipers■ Using the voice control system (ifRear window wiper andequipped)washerThe windshield wipers can be moved to theservice position using the voice control rear window wiper and washer(Operation is possible only when the vehi-can be used by operating the is stopped with the wiper switch in*1*2or)NOTICEFor details regarding the voice control sys-■ When the rear window is drytem, refer to the “MULTIMEDIADo not use the wiper, as it may damageOWNER’S MANUAL”.the rear window.*1: For the U.S.A.*2 : For CanadaOperating the wiper leverNOTICEOperating theswitch operatesthe rear wiper as follows:■ When lifting the windshield wipers4● Do not lift the windshield wipers whenthey are in the retracted positionbelow the hood. Otherwise, they mayDrivingcontact the hood, possibly resulting indamage to a windshield wiper and/orthe hood.● Do not lift a windshield wiper by thewiper blade. Otherwise, the wiperblade may be deformed.● Do not operate the wiper lever whenthe windshield wipers are lifted. Oth-erwise, the windshield wipers may*1 or*2 Offcontact the hood, possibly resulting in1damage to the windshield wipers*1*22orIntermittentand/or *1*23orNormal operation*1: For the U.S.A.*2: For Canada
209
4-3. Operating the lights and wipers
■ Using the voice control system (if
Rear window wiper and
equipped)
washer
The windshield wipers can be moved to the
service position using the voice control sys-
tem.
The rear window wiper and washer
(Operation is possible only when the vehi-
can be used by operating the lever.
cle is stopped with the wiper switch in
*1
*2
or
)
NOTICE
For details regarding the voice control sys-
■ When the rear window is dry
tem, refer to the “MULTIMEDIA
Do not use the wiper, as it may damage
OWNER’S MANUAL”.
the rear window.
*1
: For the U.S.A.
*2 : For Canada
Operating the wiper lever
NOTICE
Operating the
switch operates
the rear wiper as follows:
■ When lifting the windshield wipers
4
● Do not lift the windshield wipers when
they are in the retracted position
below the hood. Otherwise, they may
Driving
contact the hood, possibly resulting in
damage to a windshield wiper and/or
the hood.
● Do not lift a windshield wiper by the
wiper blade. Otherwise, the wiper
blade may be deformed.
● Do not operate the wiper lever when
the windshield wipers are lifted. Oth-
erwise, the windshield wipers may
*1 or
*2 Off
contact the hood, possibly resulting in
1
damage to the windshield wipers
*1
*2
2
or
Intermittent
and/or hood.
operation
*1
*2
3
or
Normal operation
*1
: For the U.S.A.
*2
: For Canada
2104-3. Operating the lights and wipersstopped, operation of the rear windowwiper will be stopped to prevent anyonenear the vehicle from being sprayed bywater from the wiper. When the back dooris closed, wiper operation will resume. ** : The setting must be customized at yourLexus dealer.■ CustomizationSetting of the reverse-linked function canbe changed. (Customizable fea-4Washer/wiper dual opera-tures:P.460tionNOTICEPushing the lever operates the wiper andwasher.■ When the washer fluid tank is emptyThe wiper will automatically operate a cou-Do not operate the switch continually asple of times after the washer washer fluid pump may overheat.■ When a nozzle becomes blocked■ The rear window wiper and washer canIn this case, contact your Lexus operated whenDo not try to clear it with a pin or otherThe power switch is in . The nozzle will be damaged.■ Using the voice control system (if■ To prevent 12-volt battery dischargeequipped)Do not leave the wiper on longer thanThe following operations can be performednecessary when the hybrid system is the voice control system:● Operating the rear window wiper onlyonce● Operating the rear window cleaningwasher (it can be performed only whenthe vehicle is stopped)For details regarding the voice control sys-tem, refer to “MULTIMEDIA OWNER’SMANUAL”.■ If no windshield washer fluid spraysCheck that the washer nozzles are notblocked, if there is washer fluid in thewasher fluid tank.■ Reverse-linked rear window wiperfunctionWhen the shift position is shifted to R whilethe front wipers are operating, the rear win-dow wiper will operate once.■ Back door opening linked rear windowwiper stop functionWhen the rear window wiper is operating, ifthe back door is opened while the vehicle is
210
4-3. Operating the lights and wipers
stopped, operation of the rear window
wiper will be stopped to prevent anyone
near the vehicle from being sprayed by
water from the wiper. When the back door
is closed, wiper operation will resume. *
* : The setting must be customized at your
Lexus dealer.
■ Customization
Setting of the reverse-linked function can
be changed. (Customizable fea-
4
Washer/wiper dual opera-
tures:P.460
tion
NOTICE
Pushing the lever operates the wiper and
washer.
■ When the washer fluid tank is empty
The wiper will automatically operate a cou-
Do not operate the switch continually as
ple of times after the washer squirts.
the washer fluid pump may overheat.
■ When a nozzle becomes blocked
■ The rear window wiper and washer can
In this case, contact your Lexus dealer.
be operated when
Do not try to clear it with a pin or other
The power switch is in ON.
object. The nozzle will be damaged.
■ Using the voice control system (if
■ To prevent 12-volt battery discharge
equipped)
Do not leave the wiper on longer than
The following operations can be performed
necessary when the hybrid system is off.
using the voice control system:
● Operating the rear window wiper only
once
● Operating the rear window cleaning
washer (it can be performed only when
the vehicle is stopped)
For details regarding the voice control sys-
tem, refer to “MULTIMEDIA OWNER’S
MANUAL”.
■ If no windshield washer fluid sprays
Check that the washer nozzles are not
blocked, if there is washer fluid in the
washer fluid tank.
■ Reverse-linked rear window wiper
function
When the shift position is shifted to R while
the front wipers are operating, the rear win-
dow wiper will operate once.
■ Back door opening linked rear window
wiper stop function
When the rear window wiper is operating, if
the back door is opened while the vehicle is
2114-4. the fuel tank cap● Always hold the grips on the fuel tankcap and turn it slowly to remove it.A whooshing sound may be heardThe fuel tank of your vehicle has awhen the fuel tank cap is until the sound cannot be heardspecial structure, which requires abefore fully removing the cap. In hotreduction in fuel tank pressureweather, pressurized fuel may sprayout of the filler neck and cause refueling. After the openerswitch has been pressed, it will take● Do not allow anyone that has not dis-several seconds until the vehicle ischarged static electricity from theirbody to come close to an open fuelready for .● Do not inhale vaporized refueling the vehicleFuel contains substances that areharmful if inhaled. Turn the power switch off and● Do not smoke while refueling the vehi-ensure that all the doors and are so may cause the fuel to ignite4and cause a fire. Confirm the type of fuel.● Do not return to the vehicle or touchDrivingany person or object that is statically■ Fuel typescharged. This may cause static elec-P.449tricity to build up, resulting in a possi-ble ignition hazard.■ Fuel tank opening for unleaded gasolineTo help prevent incorrect fueling, your vehi-■ When refuelingcle has a fuel tank opening that only accom-Observe the following precautions tomodates the special nozzle on unleadedprevent fuel overflowing from the fuelfuel :● Securely insert the fuel nozzle into theWARNINGfuel filler neck.■ When refueling the vehicle● Stop filling the tank after the fuel noz-zle automatically clicks the following precautions whilerefueling the vehicle. Failure to do so● Do not top off the fuel result in death or serious injury.● After exiting the vehicle and beforeopening the fuel door, touch anNOTICEunpainted metal surface to dischargeany static electricity. It is important to■ Refuelingdischarge static electricity before refu-●
211
4-4. Refueling
4-4.Refueling
Opening the fuel tank cap
● Always hold the grips on the fuel tank
cap and turn it slowly to remove it.
A whooshing sound may be heard
The fuel tank of your vehicle has a
when the fuel tank cap is loosened.
Wait until the sound cannot be heard
special structure, which requires a
before fully removing the cap. In hot
reduction in fuel tank pressure
weather, pressurized fuel may spray
out of the filler neck and cause injury.
before refueling. After the opener
switch has been pressed, it will take
● Do not allow anyone that has not dis-
several seconds until the vehicle is
charged static electricity from their
body to come close to an open fuel
ready for refueling.
tank.
● Do not inhale vaporized fuel.
Before refueling the vehicle
Fuel contains substances that are
harmful if inhaled.
 Turn the power switch off and
● Do not smoke while refueling the vehi-
ensure that all the doors and win-
cle.
dows are closed.
Doing so may cause the fuel to ignite
4
and cause a fire.
 Confirm the type of fuel.
● Do not return to the vehicle or touch
Driving
any person or object that is statically
■ Fuel types
charged. This may cause static elec-
P.449
tricity to build up, resulting in a possi-
ble ignition hazard.
■ Fuel tank opening for unleaded gasoline
To help prevent incorrect fueling, your vehi-
■ When refueling
cle has a fuel tank opening that only accom-
Observe the following precautions to
modates the special nozzle on unleaded
prevent fuel overflowing from the fuel
fuel pumps.
tank:
● Securely insert the fuel nozzle into the
WARNING
fuel filler neck.
■ When refueling the vehicle
● Stop filling the tank after the fuel noz-
zle automatically clicks off.
Observe the following precautions while
refueling the vehicle. Failure to do so
● Do not top off the fuel tank.
may result in death or serious injury.
● After exiting the vehicle and before
opening the fuel door, touch an
NOTICE
unpainted metal surface to discharge
any static electricity. It is important to
■ Refueling
discharge static electricity before refu-
● Finish refueling within 30 minutes. If
eling because sparks resulting from
more than 30 minutes passes, the
static electricity can cause fuel vapors
internal valve closes. In this condition,
to ignite while refueling.
fuel may overflow during the refueling
process. Press the fuel filler door
opener switch again.
2124-4. Refueling2 Turn the fuel tank cap slowly andNOTICEremove it, then put it into the holder● Make sure that the fuel filler door lockon the fuel filler not pushed by the fuel nozzle boot,etc. If the lock is held, the internal valvecloses and fuel may overflow. To pre-vent it, press the fuel filler door openerswitch again.■ When the fuel filler door cannot beopened● Do not spill fuel during refueling.P.429Doing so may damage the vehicle,such as causing the emission controlsystem to operate abnormally, damag-Closing the fuel tank caping fuel system components or thevehicle’s painted refueling, turn the fuel tank capuntil you hear a click. Once the cap isOpening the fuel tank capreleased, it will turn slightly in theopposite direction.1 Press the opener fuel filler door will open within about10 seconds of the switch being refueling is possible, a message willbe shown on the multi-information displayin the instrument cluster to indicate theprogress of the fuel filler door ■ When replacing the fuel tank capDo not use anything but a genuine Lexusfuel tank cap designed for your so may cause a fire or other inci-dent which may result in death or seriousinjury.
212
4-4. Refueling
2 Turn the fuel tank cap slowly and
NOTICE
remove it, then put it into the holder
● Make sure that the fuel filler door lock
on the fuel filler door.
is not pushed by the fuel nozzle boot,
etc. If the lock is held, the internal valve
closes and fuel may overflow. To pre-
vent it, press the fuel filler door opener
switch again.
■ When the fuel filler door cannot be
opened
● Do not spill fuel during refueling.
P.429
Doing so may damage the vehicle,
such as causing the emission control
system to operate abnormally, damag-
Closing the fuel tank cap
ing fuel system components or the
vehicle’s painted surface.
After refueling, turn the fuel tank cap
until you hear a click. Once the cap is
Opening the fuel tank cap
released, it will turn slightly in the
opposite direction.
1 Press the opener switch.
The fuel filler door will open within about
10 seconds of the switch being pressed.
Before refueling is possible, a message will
be shown on the multi-information display
in the instrument cluster to indicate the
progress of the fuel filler door opener.
WARNING
■ When replacing the fuel tank cap
Do not use anything but a genuine Lexus
fuel tank cap designed for your vehicle.
Doing so may cause a fire or other inci-
dent which may result in death or serious
injury.
2134-5. Using the driving support the driving support systemsLexus Safety System +3 soft-■ Precautions for useware update *● Be aware that some functions may tem-porarily be disabled if a legal or safety* : If equippedrelated issue occurs.● If a connected services contract has notIt is necessary to enter a connectedbeen entered or has expired, softwareservices contract, provided byupdates will not be able to be , to use these functions. Fordetails, contact your Lexus your vehicle’s LexusWARNINGSafety System +3 version■ For safe useIf the software of this system has beenWhen the Lexus Safety System +3 soft-updated after initial purchase of theware is updated, the operating methodsof functions may change. Using this sys-vehicle, to access the appropriatetem without knowing the correct operat-Owner’s Manual, it is necessary toing methods may lead to an accidentcheck the software version of the sys-4resulting in death or serious and then visit the Owner’s Manual● Make sure to read the Digital Owner’ which corresponds to the soft-ware version of the system, available at■ Checking the version using Lexusthe Owner’s Manual website, beforeAppusing this software version of the system canContent of the Lexus Safety Sys-be checked using Lexus +3 Owner’s Manual■ Selecting your vehicle’s LexusSafety System +3 versionThis Owner’s Manual contains infor-1 Access the following URL using amation for Ver.2. For the latest infor-computer or smartphone:mation about the controls, use,warnings/precautions, etc. of each For U.S.A ownersfunction of Lexus Safety System +3, to the Digital Owner’s Manual atowners-manuals/the Owner’s Manual the software of this system has beenupdated after initial purchase of thevehicle, before using this system, besure to read the Owner’s Manualw
213
4-5. Using the driving support systems
4-5.Using the driving support systems
Lexus Safety System +3 soft-
■ Precautions for use
ware update *
● Be aware that some functions may tem-
porarily be disabled if a legal or safety
* : If equipped
related issue occurs.
● If a connected services contract has not
It is necessary to enter a connected
been entered or has expired, software
services contract, provided by
updates will not be able to be performed
wirelessly.
Lexus, to use these functions. For
details, contact your Lexus dealer.
Checking your vehicle’s Lexus
WARNING
Safety System +3 version
■ For safe use
If the software of this system has been
When the Lexus Safety System +3 soft-
updated after initial purchase of the
ware is updated, the operating methods
of functions may change. Using this sys-
vehicle, to access the appropriate
tem without knowing the correct operat-
Owner’s Manual, it is necessary to
ing methods may lead to an accident
check the software version of the sys-
4
resulting in death or serious injury.
tem and then visit the Owner’s Manual
● Make sure to read the Digital Owner’s
website.
Driving
Manual which corresponds to the soft-
ware version of the system, available at
■ Checking the version using Lexus
the Owner’s Manual website, before
App
using this system.
The software version of the system can
Content of the Lexus Safety Sys-
be checked using Lexus App.
tem +3 Owner’s Manual
■ Selecting your vehicle’s Lexus
Safety System +3 version
This Owner’s Manual contains infor-
1 Access the following URL using a
mation for Ver.2. For the latest infor-
computer or smartphone:
mation about the controls, use,
warnings/precautions, etc. of each
 For U.S.A owners
function of Lexus Safety System +3,
refer to the Digital Owner’s Manual at
owners-manuals/
the Owner’s Manual website.
manual?om=300h.2025.2401.
If the software of this system has been
updated after initial purchase of the
vehicle, before using this system, be
sure to read the Owner’s Manual
which corresponds to the software
version of the system.
2144-5. Using the driving support systems For Canadian owners● Software update Select the file which includes thepreviously checked system the softwareIf a software update is available, a noti-fication will be displayed by Lexus the instructions displayed onthe screen.■ Software update precautions● After a software update has been per-formed, it will not be possible to revert toa previous version.● Depending on the communication envi-ronment and the content of an update, asoftware update may take several an update will be suspendedwhen the power switch is turned off, it willresume when the power switch ischanged back to ON.● Lexus Safety System +3 can still be usedwhile a software update is being per-formed.■ What can be checked using the LexusAppThe following items can be checked or per-formed.● Software version, update details, precau-tions, use methods, etc.
214
4-5. Using the driving support systems
 For Canadian owners
● Software update
lexus/manual?om=300h.
2025.2401.
2 Select the file which includes the
previously checked system version.
Updating the software
If a software update is available, a noti-
fication will be displayed by Lexus App.
Follow the instructions displayed on
the screen.
■ Software update precautions
● After a software update has been per-
formed, it will not be possible to revert to
a previous version.
● Depending on the communication envi-
ronment and the content of an update, a
software update may take several hours.
Although an update will be suspended
when the power switch is turned off, it will
resume when the power switch is
changed back to ON.
● Lexus Safety System +3 can still be used
while a software update is being per-
formed.
■ What can be checked using the Lexus
App
The following items can be checked or per-
formed.
● Software version, update details, precau-
tions, use methods, etc.
2154-5. Using the driving support systemsLexus Safety System +3● Depending on external noise, the vol-ume of the audio system, etc. it may bedifficult to hear the warning Lexus Safety System +3 con-Also, depending on the road condi-tions, it may be difficult to recognizesists of the driving assist systemsthe operation of the contributes to a safe and com-■ When it is necessary to disable thefortable driving experience:systemIn the following situations, make sure toWARNINGdisable the system.■ Lexus Safety System +3Failure to do so may lead to the systemnot operating properly, possibly leadingThe Lexus Safety System +3 operatesto an accident resulting in death or seri-under the assumption that the driver willous safely, and is designed to helpreduce the impact to the occupants in a● When the vehicle is tilted due to beingcollision and assist the driver under nor-overloaded or having a flat tiremal driving there is a limit to the degree of recog-● When driving at extremely high4nition accuracy and control performancespeedsthat this system can provide, do not● When towing another vehicleoverly rely on this system. The driver isDrivingsolely responsible for paying attention to● When the vehicle is being transportedthe vehicle’s surroundings and drivingby a truck, ship, train, .● When the vehicle is raised on a lift and■ For safe usethe tires are allowed to rotate freely● Do not overly rely on this system. Thedriver is solely responsible for paying● When inspecting the vehicle using aattention to the vehicle’s surroundingsdrum tester such as a chassis dyna-and driving safely. This system may notmometer or speedometer tester, oroperate in all situations and providedwhen using an on vehicle wheel bal-assistance is limited. Over-reliance onancerthis system to drive the vehicle safely● When the vehicle is driven in a sportymay lead to an accident resulting inmanner or off-roaddeath or serious injury.● When using an au
215
4-5. Using the driving support systems
Lexus Safety System +3
● Depending on external noise, the vol-
ume of the audio system, etc. it may be
difficult to hear the warning buzzer.
The Lexus Safety System +3 con-
Also, depending on the road condi-
tions, it may be difficult to recognize
sists of the driving assist systems
the operation of the system.
and contributes to a safe and com-
■ When it is necessary to disable the
fortable driving experience:
system
In the following situations, make sure to
WARNING
disable the system.
■ Lexus Safety System +3
Failure to do so may lead to the system
not operating properly, possibly leading
The Lexus Safety System +3 operates
to an accident resulting in death or seri-
under the assumption that the driver will
ous injury.
drive safely, and is designed to help
reduce the impact to the occupants in a
● When the vehicle is tilted due to being
collision and assist the driver under nor-
overloaded or having a flat tire
mal driving conditions.
As there is a limit to the degree of recog-
● When driving at extremely high
4
nition accuracy and control performance
speeds
that this system can provide, do not
● When towing another vehicle
overly rely on this system. The driver is
Driving
solely responsible for paying attention to
● When the vehicle is being transported
the vehicle’s surroundings and driving
by a truck, ship, train, etc.
safely.
● When the vehicle is raised on a lift and
■ For safe use
the tires are allowed to rotate freely
● Do not overly rely on this system. The
driver is solely responsible for paying
● When inspecting the vehicle using a
attention to the vehicle’s surroundings
drum tester such as a chassis dyna-
and driving safely. This system may not
mometer or speedometer tester, or
operate in all situations and provided
when using an on vehicle wheel bal-
assistance is limited. Over-reliance on
ancer
this system to drive the vehicle safely
● When the vehicle is driven in a sporty
may lead to an accident resulting in
manner or off-road
death or serious injury.
● When using an automatic car wash
● Do not attempt to test the operation of
the system, as it may not operate prop-
● When a sensor is misaligned or
erly, possibly leading to an accident.
deformed due to a strong impact
being applied to the sensor or the area
● If attention is necessary while perform-
around the sensor
ing driving operations or a system mal-
function occurs, a warning message or
● When accessories which obstruct a
warning buzzer will be operated. If a
sensor or light are temporarily
warning message is displayed on the
installed to the vehicle
display, follow the instructions dis-
played.
● When a compact spare tire or tire
chains are installed to the vehicle or an
emergency tire puncture repair kit has
been used
2164-5. Using the driving support systemsSensors used by Lexus SafetyWARNINGSystem +3● When the tires are excessively worn orthe inflation pressure of the tires is lowVarious sensors are used to obtain the● When tires other than the manufac-necessary information for systemturer specified size are installedoperation.● When the vehicle cannot be driven■ Sensors which detect the sur-stably, due to a collision, malfunction, conditions FrontDriving assist system■ AHB (Automatic High Beam)P.201■ PCS (Pre-Collision System)P.221■ LTA (Lane Tracing Assist)P.231A Front radar sensor■ LDA (Lane Departure Alert)P.235B Front camera Rear■ PDA (Proactive Driving Assist)P.241■ RSA (Road Sign Assist) *P.246■ Dynamic radar cruise controlP.249■ Cruise controlP.259A Rear side radar sensors■ Emergency Driving Stop SystemP.262*: If equipped
216
4-5. Using the driving support systems
Sensors used by Lexus Safety
WARNING
System +3
● When the tires are excessively worn or
the inflation pressure of the tires is low
Various sensors are used to obtain the
● When tires other than the manufac-
necessary information for system
turer specified size are installed
operation.
● When the vehicle cannot be driven
■ Sensors which detect the sur-
stably, due to a collision, malfunction,
etc.
rounding conditions
 Front
Driving assist system
■ AHB (Automatic High Beam)
P.201
■ PCS (Pre-Collision System)
P.221
■ LTA (Lane Tracing Assist)
P.231
A Front radar sensor
■ LDA (Lane Departure Alert)
P.235
B Front camera
 Rear
■ PDA (Proactive Driving Assist)
P.241
■ RSA (Road Sign Assist) *
P.246
■ Dynamic radar cruise control
P.249
■ Cruise control
P.259
A Rear side radar sensors
■ Emergency Driving Stop System
P.262
*
: If equipped
2174-5. Using the driving support systems● Do not modify or paint the radar sen-WARNINGsors or radar sensor cover, or replace■ To prevent malfunction of the radarthem with anything other than Lexussensorsgenuine the following precautions.● In the following situations, recalibra-Failure to do so may lead to a radar sen-tion of the radar sensors will be neces-sor not operating properly, possiblysary. For details, contact your Lexusleading to an accident resulting in serious injury.• When a radar sensor is removed and● Keep the radar sensors and radar sen-installed, or replacedsor covers clean at all times.• When the front bumper or the frontClean the front of a radar sensor or thegrille has been replacedfront or back of a radar sensor cover if itis dirty or covered with water droplets,■ To prevent malfunction of the frontcamerasnow, the following cleaning the radar sensor andFailure to do so may lead to the frontradar sensor cover, use a soft cloth tocamera not operating properly, possibly4remove dirt so as to not damage to an accident resulting in deathor serious ● Always keep the windshield clean.• If the windshield is dirty or coveredwith an oily film, water droplets, snow,etc., clean the windshield.• Even if a glass coating agent is appliedto the windshield, it will still be neces-sary to use the windshield wipers toA Radar sensorremove water droplets, etc. from thearea of the windshield in front of theB Radar sensor coverfront camera.● Do not attach accessories, stickers• If the inner side of the windshield(including transparent stickers), alumi-where the front camera is installed isnum tape, etc. to a radar sensor ordirty, contact your Lexus sensor cover and their sur-rounding area.● Do not subject a radar sensor or itssurrounding area to a radar sensor, the front grille, or frontbumper has been subjected to a impact,have the vehicle inspected by your Lexu
217
4-5. Using the driving support systems
● Do not modify or paint the radar sen-
WARNING
sors or radar sensor cover, or replace
■ To prevent malfunction of the radar
them with anything other than Lexus
sensors
genuine parts.
Observe the following precautions.
● In the following situations, recalibra-
Failure to do so may lead to a radar sen-
tion of the radar sensors will be neces-
sor not operating properly, possibly
sary. For details, contact your Lexus
leading to an accident resulting in death
dealer.
or serious injury.
• When a radar sensor is removed and
● Keep the radar sensors and radar sen-
installed, or replaced
sor covers clean at all times.
• When the front bumper or the front
Clean the front of a radar sensor or the
grille has been replaced
front or back of a radar sensor cover if it
is dirty or covered with water droplets,
■ To prevent malfunction of the front
camera
snow, etc.
Observe the following precautions.
When cleaning the radar sensor and
Failure to do so may lead to the front
radar sensor cover, use a soft cloth to
camera not operating properly, possibly
4
remove dirt so as to not damage them.
leading to an accident resulting in death
or serious injury.
Driving
● Always keep the windshield clean.
• If the windshield is dirty or covered
with an oily film, water droplets, snow,
etc., clean the windshield.
• Even if a glass coating agent is applied
to the windshield, it will still be neces-
sary to use the windshield wipers to
A Radar sensor
remove water droplets, etc. from the
area of the windshield in front of the
B Radar sensor cover
front camera.
● Do not attach accessories, stickers
• If the inner side of the windshield
(including transparent stickers), alumi-
where the front camera is installed is
num tape, etc. to a radar sensor or
dirty, contact your Lexus dealer.
radar sensor cover and their sur-
rounding area.
● Do not subject a radar sensor or its
surrounding area to impact.
If a radar sensor, the front grille, or front
bumper has been subjected to a impact,
have the vehicle inspected by your Lexus
dealer.
● Do not disassemble the radar sensors.
2184-5. Using the driving support systems● Do not damage the lens of the frontWARNINGcamera or allow it to become dirty.● Do not attach stickers (including trans-When cleaning the inside of the wind-parent stickers) or other items to theshield, do not allow glass cleaner to con-area of the windshield in front of thefront camera (shaded area in the illus-tact the lens of the front camera. Do nottration).touch the lens of the front the lens of the front camera is dirty ordamaged, contact your Lexus dealer.● Do not subject the front camera to astrong impact.● Do not change the position or orienta-tion of the front camera or remove it.● Do not disassemble the front camera.A Approximately 1.6 in. (4 cm)● Do not modify any parts around theB Approximately 1.6 in. (4 cm)front camera, such as the inside rearview mirror or ceiling.● If the part of the windshield in front ofthe front camera is fogged up or cov-● Do not attach accessories which mayered with condensation or ice, use theobstruct the front camera to the hood,windshield defogger to remove thefront grille, or front bumper. Forfog, condensation, or , contact your Lexus dealer.● If water droplets cannot be properly● If a surfboard or other long object is toremoved from the area of the wind-be mounted on the roof, make sureshield in front of the front camera bythat it will not obstruct the front cam-the windshield wipers, replace insert or wiper blade.● Do not modify or change the head-● Do not attach window tint to the wind-lights and other .■ Front camera installation area on the● Replace the windshield if it is damagedwindshieldor the system determines that the wind-If the windshield has been replaced,shield may be fogged up, it will automati-recalibration of the front camera will becally operate the heater to defog the partof the windshield around the front cam-necessary. For details, contact yourera. When cleaning, etc., be careful notLexus touch
218
4-5. Using the driving support systems
● Do not damage the lens of the front
WARNING
camera or allow it to become dirty.
● Do not attach stickers (including trans-
When cleaning the inside of the wind-
parent stickers) or other items to the
shield, do not allow glass cleaner to con-
area of the windshield in front of the
front camera (shaded area in the illus-
tact the lens of the front camera. Do not
tration).
touch the lens of the front camera.
If the lens of the front camera is dirty or
damaged, contact your Lexus dealer.
● Do not subject the front camera to a
strong impact.
● Do not change the position or orienta-
tion of the front camera or remove it.
● Do not disassemble the front camera.
A Approximately 1.6 in. (4 cm)
● Do not modify any parts around the
B Approximately 1.6 in. (4 cm)
front camera, such as the inside rear
view mirror or ceiling.
● If the part of the windshield in front of
the front camera is fogged up or cov-
● Do not attach accessories which may
ered with condensation or ice, use the
obstruct the front camera to the hood,
windshield defogger to remove the
front grille, or front bumper. For
fog, condensation, or ice.
details, contact your Lexus dealer.
● If water droplets cannot be properly
● If a surfboard or other long object is to
removed from the area of the wind-
be mounted on the roof, make sure
shield in front of the front camera by
that it will not obstruct the front cam-
the windshield wipers, replace the
era.
wiper insert or wiper blade.
● Do not modify or change the head-
● Do not attach window tint to the wind-
lights and other lights.
shield.
■ Front camera installation area on the
● Replace the windshield if it is damaged
windshield
or cracked.
If the system determines that the wind-
If the windshield has been replaced,
shield may be fogged up, it will automati-
recalibration of the front camera will be
cally operate the heater to defog the part
of the windshield around the front cam-
necessary. For details, contact your
era. When cleaning, etc., be careful not
Lexus dealer.
to touch the area around the front cam-
era until the windshield has cooled suffi-
● Do not allow liquids to contact the
ciently, as touching it may cause burns.
front camera.
● Do not allow bright lights to shine into
the front camera.
■ Situations in which the sensors may not
operate properly
● When the height or inclination of the
vehicle has been changed due to modifi-
cations
● When the windshield is dirty, fogged up,
2194-5. Using the driving support systemscracked or damaged● When a detectable vehicle has a lowfront or rear end, such as a low bed trailer● When the ambient temperature is high orlow● When mud, water, snow, dead insects,foreign matter, etc., is attached to thefront of the sensor● When in inclement weather such asheavy rain, fog, snow, or a sandstorm● When water, snow, dust, etc. is thrown upin front of the vehicle, or when drivingthrough mist or smoke● When a detectable vehicle has extremelyhigh ground clearance● When the headlights are not illuminatedwhile driving in the dark, such as at nightor when in a tunnel● When the lens of a headlight is dirty andillumination is weak● When the headlights are misaligned● When a headlight is malfunctioning4● When the headlights of another vehicle,sunlight, or reflected light shines directly● When a detectable vehicle is carrying aDrivinginto the front cameraload which protrudes from its cargo area● When the brightness of the surrounding● When a detectable vehicle has littlearea changes suddenlyexposed metal, such as a vehicle which is● When driving near a TV tower, broad-partially covered with cloth, station, electric power plant,● When a detectable vehicle is irregularlyradar equipped vehicles, etc., or othershaped, such as a tractor, sidecar, where strong radio waves orelectrical noise may be present● When the distance between the vehicleand a detectable vehicle has become● When a wiper blade is blocking the frontextremely shortcamera● When a detectable vehicle is at an angle● When in a location or near objects whichstrongly reflect radio waves, such as the● When snow, mud, etc. is attached to afollowing:detectable vehicle• Tunnels● When driving on the following kinds of• Truss bridgesroads:• Gravel roads• Roads with sharp curves or winding• Rutted, snow-covered roadsroads• Walls• Roads with changes in grade, such as• Large truckssudden inclines or declines• Manhole covers• Roads which is sloped to
219
4-5. Using the driving support systems
cracked or damaged
● When a detectable vehicle has a low
front or rear end, such as a low bed trailer
● When the ambient temperature is high or
low
● When mud, water, snow, dead insects,
foreign matter, etc., is attached to the
front of the sensor
● When in inclement weather such as
heavy rain, fog, snow, or a sandstorm
● When water, snow, dust, etc. is thrown up
in front of the vehicle, or when driving
through mist or smoke
● When a detectable vehicle has extremely
high ground clearance
● When the headlights are not illuminated
while driving in the dark, such as at night
or when in a tunnel
● When the lens of a headlight is dirty and
illumination is weak
● When the headlights are misaligned
● When a headlight is malfunctioning
4
● When the headlights of another vehicle,
sunlight, or reflected light shines directly
● When a detectable vehicle is carrying a
Driving
into the front camera
load which protrudes from its cargo area
● When the brightness of the surrounding
● When a detectable vehicle has little
area changes suddenly
exposed metal, such as a vehicle which is
● When driving near a TV tower, broad-
partially covered with cloth, etc.
casting station, electric power plant,
● When a detectable vehicle is irregularly
radar equipped vehicles, etc., or other
shaped, such as a tractor, sidecar, etc.
location where strong radio waves or
electrical noise may be present
● When the distance between the vehicle
and a detectable vehicle has become
● When a wiper blade is blocking the front
extremely short
camera
● When a detectable vehicle is at an angle
● When in a location or near objects which
strongly reflect radio waves, such as the
● When snow, mud, etc. is attached to a
following:
detectable vehicle
• Tunnels
● When driving on the following kinds of
• Truss bridges
roads:
• Gravel roads
• Roads with sharp curves or winding
• Rutted, snow-covered roads
roads
• Walls
• Roads with changes in grade, such as
• Large trucks
sudden inclines or declines
• Manhole covers
• Roads which is sloped to the left or right
• Guardrail
• Roads with deep ruts
• Metal plates
• Roads which are rough and unmain-
● When near a step or protrusion
tained
• Roads which frequently undulate or are
● When a detectable vehicle is narrow,
bumpy
such as a small mobility vehicle
● When the steering wheel is being oper-
● When a detectable vehicle has a small
ated frequently or suddenly
front or rear end, such as an unloaded
truck
● When the vehicle is not in a constant
2204-5. Using the driving support systemsposition within a lane● When the VSC, TRAC, or other safetyrelated system is off● When parts related to this system, thebrakes, etc. are cold or extremely hot,■ Changes in brake operation sound andwet, response● When the wheels are misaligned● When the brakes have been operated,brake operation sounds may be heard● When driving on slick road surfaces, suchand the brake pedal response mayas when it is covered with ice, snow,change, but this does not indicate a mal-gravel, .● When the course of the vehicle differs● When the system is operating, the brakefrom the shape of a curvepedal may feel stiffer than expected or● When the vehicle speed is excessivelysink. In either situation the brake pedalhigh when entering a curvecan be depressed further. Furtherdepress the brake pedal as necessary.● When entering/exiting a parking lot,garage, car elevator, etc.● When driving in a parking lot● When driving through an area wherethere are obstructions which may contactyour vehicle, such as tall grass, treebranches, a curtain, etc.● When driving in strong wind■ Situations in which the lane may not bedetected● When the lane is extremely wide or nar-row● Immediately after changing lanes orpassing through an intersection● When driving in a temporary lane or laneregulated by construction● When there are structures, patterns,shadows which are similar to lane lines inthe surrounding● When there are multiple white lines for alane line● When the lane lines are not clear or driv-ing on a wet road surface● When a lane line is on a curb● When driving on a bright, reflective roadsurface, such as concrete■ Situations in which some or all of thefunctions of the system cannot operate● When a malfunction is detected in thissystem or a related system, such as thebrakes, steering, etc.● When the VSC, TRAC, or other safetyrelated system is operating
220
4-5. Using the driving support systems
position within a lane
● When the VSC, TRAC, or other safety
related system is off
● When parts related to this system, the
brakes, etc. are cold or extremely hot,
■ Changes in brake operation sound and
wet, etc.
pedal response
● When the wheels are misaligned
● When the brakes have been operated,
brake operation sounds may be heard
● When driving on slick road surfaces, such
and the brake pedal response may
as when it is covered with ice, snow,
change, but this does not indicate a mal-
gravel, etc.
function.
● When the course of the vehicle differs
● When the system is operating, the brake
from the shape of a curve
pedal may feel stiffer than expected or
● When the vehicle speed is excessively
sink. In either situation the brake pedal
high when entering a curve
can be depressed further. Further
depress the brake pedal as necessary.
● When entering/exiting a parking lot,
garage, car elevator, etc.
● When driving in a parking lot
● When driving through an area where
there are obstructions which may contact
your vehicle, such as tall grass, tree
branches, a curtain, etc.
● When driving in strong wind
■ Situations in which the lane may not be
detected
● When the lane is extremely wide or nar-
row
● Immediately after changing lanes or
passing through an intersection
● When driving in a temporary lane or lane
regulated by construction
● When there are structures, patterns,
shadows which are similar to lane lines in
the surrounding
● When there are multiple white lines for a
lane line
● When the lane lines are not clear or driv-
ing on a wet road surface
● When a lane line is on a curb
● When driving on a bright, reflective road
surface, such as concrete
■ Situations in which some or all of the
functions of the system cannot operate
● When a malfunction is detected in this
system or a related system, such as the
brakes, steering, etc.
● When the VSC, TRAC, or other safety
related system is operating
2214-5. Using the driving support systemsPCS (Pre-Collision System)● Although the pre-collision system isdesigned to help avoid or help reducethe impact of a collision, its effective-The pre-collision system uses sen-ness may change according to variousconditions. Therefore, it may notsors to detect objects (P.221) inalways be able to achieve the samethe path of the vehicle. When thelevel of determines that the possi-Read the following items carefully. Dobility of a frontal collision with anot overly rely on this system and alwaysdetectable object is high, a warningdrive to urge the driver to take• For safe use: P.215evasive action and the potential■ When to disable the pre-collision sys-brake pressure is increased to helptemthe driver avoid the collision. If the● When it is necessary to disable the sys-system determines that the possi-tem: P.215bility of a collision is extremely high,the brakes are automaticallyDetectable objects4applied to help avoid the collision orhelp reduce the impact of the colli-The system can detect the following objects. (Detectableobjects differ depending on the func-The pre-collision system can be dis-tion.)abled/enabled and the warning tim- Vehiclesing can be changed. (P.230) Bicycles *WARNING Pedestrians■ For safe use● Driving safely is solely the responsibil- Motorcycles *ity of the driver. Pay careful attention Wallsto the surrounding conditions in orderto ensure safe driving.*: Detected as a detectable object onlyNever use the pre-collision system inwhen being of normal braking operations. Thissystem cannot help avoid or reduce theSystem functionsimpact of a collision in every -reliance on this system to drive the■ Pre-collision warningvehicle safely may lead to an accidentresulting in death or serious the system determines that thepossibility of a collision is high, a buzzerwill sound and an icon and warningmessage will be
221
4-5. Using the driving support systems
PCS (Pre-Collision System)
● Although the pre-collision system is
designed to help avoid or help reduce
the impact of a collision, its effective-
The pre-collision system uses sen-
ness may change according to various
conditions. Therefore, it may not
sors to detect objects (P.221) in
always be able to achieve the same
the path of the vehicle. When the
level of performance.
system determines that the possi-
Read the following items carefully. Do
bility of a frontal collision with a
not overly rely on this system and always
detectable object is high, a warning
drive carefully.
operates to urge the driver to take
• For safe use: P.215
evasive action and the potential
■ When to disable the pre-collision sys-
brake pressure is increased to help
tem
the driver avoid the collision. If the
● When it is necessary to disable the sys-
system determines that the possi-
tem: P.215
bility of a collision is extremely high,
the brakes are automatically
Detectable objects
4
applied to help avoid the collision or
help reduce the impact of the colli-
The system can detect the following as
Driving
sion.
detectable objects. (Detectable
objects differ depending on the func-
The pre-collision system can be dis-
tion.)
abled/enabled and the warning tim-
 Vehicles
ing can be changed. (P.230)
 Bicycles *
WARNING
 Pedestrians
■ For safe use
● Driving safely is solely the responsibil-
 Motorcycles *
ity of the driver. Pay careful attention
 Walls
to the surrounding conditions in order
to ensure safe driving.
*
: Detected as a detectable object only
Never use the pre-collision system in
when being ridden.
place of normal braking operations. This
system cannot help avoid or reduce the
System functions
impact of a collision in every situation.
Over-reliance on this system to drive the
■ Pre-collision warning
vehicle safely may lead to an accident
resulting in death or serious injury.
When the system determines that the
possibility of a collision is high, a buzzer
will sound and an icon and warning
message will be displayed on the multi-
information display to urge the driver
to take evasive action.
2224-5. Using the driving support systemsIf the detectable object is a vehicle,lowing conditions are met, assistancemoderate braking will be performedwill be provided to help enhance vehi-with the stability and prevent lane depar-ture. During assistance, in addition tothe pre-collision warning, the follow-ing icon will be displayed on the multi-information display. The possibility of a collision is high There is sufficient space within thelane to perform evasive steeringmaneuversIf the system determines that the accel- The driver is operating the steeringerator pedal is strongly depressed, thewheelfollowing icon and message will be dis-During assistance, the pre-collisionplayed on the multi-information dis-warning will operate and a be displayed to warn the driver.■ Pre-collision brake assist■ Intersection collision avoidanceIf the system determines that the possi-support (left/right turn)bility of a collision is high and the brakeIn situations such as the following, if theoperation by the driver is insufficient,system determines that the possibilitythe braking power will be a collision is high, the pre-collision■ Pre-collision brake controlwarning and pre-collision braking the system determines that the possi-bility of a collision is extremely high, theDepending on the intersection, assis-brakes are automatically applied totance may not operate avoid the collision or reduce the When turning left/right at an inter-impact of the and crossing the path of an■ Emergency steering assistoncoming vehicleIf the system determines that the fol-
222
4-5. Using the driving support systems
If the detectable object is a vehicle,
lowing conditions are met, assistance
moderate braking will be performed
will be provided to help enhance vehi-
with the warning.
cle stability and prevent lane depar-
ture. During assistance, in addition to
the pre-collision warning, the follow-
ing icon will be displayed on the multi-
information display.
 The possibility of a collision is high
 There is sufficient space within the
lane to perform evasive steering
maneuvers
If the system determines that the accel-
 The driver is operating the steering
erator pedal is strongly depressed, the
wheel
following icon and message will be dis-
During assistance, the pre-collision
played on the multi-information dis-
warning will operate and a message
play.
will be displayed to warn the driver.
■ Pre-collision brake assist
■ Intersection collision avoidance
If the system determines that the possi-
support (left/right turn)
bility of a collision is high and the brake
In situations such as the following, if the
operation by the driver is insufficient,
system determines that the possibility
the braking power will be increased.
of a collision is high, the pre-collision
■ Pre-collision brake control
warning and pre-collision braking will
operate.
If the system determines that the possi-
bility of a collision is extremely high, the
Depending on the intersection, assis-
brakes are automatically applied to
tance may not operate correctly.
help avoid the collision or reduce the
 When turning left/right at an inter-
impact of the collision.
section and crossing the path of an
■ Emergency steering assist
oncoming vehicle
If the system determines that the fol-
2234-5. Using the driving support systems■ Acceleration Suppression at LowSpeedWhen driving at a low speed, if theaccelerator pedal is stronglydepressed and the system determinesthat there is a possibility of a collision,hybrid system output will be restrainedor the brakes will be applied weakly torestrict acceleration. During operation, When turning left/right and aa buzzer will sound and the followingpedestrian or bicycle is detectedicon and message will be displayed onthe multi-information display.4Driving■ Intersection collision avoidancesupport (crossing vehicles)■ Suspension control (if equipped)At an intersection, etc., if the systemWhen the system determines that thedetermines that the possibility of a col-possibility of a collision is high, thelision with an approaching vehicle orAdaptive Variable Suspension Systemmotorcycle is high, the pre-collision(P.293) controls the damping forcewarning and pre-collision braking willof the shock absorbers to help an appropriate vehicle on the intersection, assis-tance may not operate ■ Pre-collision braking● When the pre-collision braking func-tion is operating, a large amount ofbraking force will be applied.● The pre-collision braking function isnot designed to hold the vehiclestopped. If the vehicle is stopped bypre-collision brake control, the drivershould operate the brakes immedi-ately as necessary.
223
4-5. Using the driving support systems
■ Acceleration Suppression at Low
Speed
When driving at a low speed, if the
accelerator pedal is strongly
depressed and the system determines
that there is a possibility of a collision,
hybrid system output will be restrained
or the brakes will be applied weakly to
restrict acceleration. During operation,
 When turning left/right and a
a buzzer will sound and the following
pedestrian or bicycle is detected
icon and message will be displayed on
the multi-information display.
4
Driving
■ Intersection collision avoidance
support (crossing vehicles)
■ Suspension control (if equipped)
At an intersection, etc., if the system
When the system determines that the
determines that the possibility of a col-
possibility of a collision is high, the
lision with an approaching vehicle or
Adaptive Variable Suspension System
motorcycle is high, the pre-collision
(P.293) controls the damping force
warning and pre-collision braking will
of the shock absorbers to help main-
operate.
tain an appropriate vehicle posture.
Depending on the intersection, assis-
tance may not operate correctly.
WARNING
■ Pre-collision braking
● When the pre-collision braking func-
tion is operating, a large amount of
braking force will be applied.
● The pre-collision braking function is
not designed to hold the vehicle
stopped. If the vehicle is stopped by
pre-collision brake control, the driver
should operate the brakes immedi-
ately as necessary.
2244-5. Using the driving support systems• While the emergency steering assist isWARNINGoperating, if the accelerator pedal is● The pre-collision braking function maydepressed strongly, the steering wheelnot operate if certain operations areis turned heavily, or the brake pedal isperformed by the driver. If the acceler-depressed, the system may determineator pedal is being depressed stronglythat the driver is taking evasive actionor the steering wheel is being turned,and emergency steering assist opera-the system may determine that thetion may be is taking evasive action and pos-sibly prevent the pre-collision braking• While the emergency steering assist isfunction from , if the steering wheel is heldor turned in the opposite direction of● If the brake pedal is being depressed,system operation, emergency steer-the system may determine that theing assist operation will be is taking evasive action and pos-sibly delay the operation timing of thepre-collision brake control.■ Acceleration Suppression at LowSpeedIf the steering wheel is being turned, thesystem may determine that the driver istaking evasive action and possibly pre-vent the Acceleration Suppression atLow Speed function from operating orpossibly causing its operation to be can-celed.■ Emergency steering assist● The emergency steering assist will becanceled when the system determinesthat lane departure prevention controlhas completed.● Depending on operations performedby the driver, emergency steeringassist may not operate or operationmay be canceled.• If the accelerator pedal is depressedstrongly, the steering wheel is turnedheavily, the brake pedal is depressed,or the turn signal lever is operated, thesystem may determine that the driveris taking evasive action and the emer-gency steering assist may not operate.
224
4-5. Using the driving support systems
• While the emergency steering assist is
WARNING
operating, if the accelerator pedal is
● The pre-collision braking function may
depressed strongly, the steering wheel
not operate if certain operations are
is turned heavily, or the brake pedal is
performed by the driver. If the acceler-
depressed, the system may determine
ator pedal is being depressed strongly
that the driver is taking evasive action
or the steering wheel is being turned,
and emergency steering assist opera-
the system may determine that the
tion may be canceled.
driver is taking evasive action and pos-
sibly prevent the pre-collision braking
• While the emergency steering assist is
function from operating.
operating, if the steering wheel is held
or turned in the opposite direction of
● If the brake pedal is being depressed,
system operation, emergency steer-
the system may determine that the
ing assist operation will be canceled.
driver is taking evasive action and pos-
sibly delay the operation timing of the
pre-collision brake control.
■ Acceleration Suppression at Low
Speed
If the steering wheel is being turned, the
system may determine that the driver is
taking evasive action and possibly pre-
vent the Acceleration Suppression at
Low Speed function from operating or
possibly causing its operation to be can-
celed.
■ Emergency steering assist
● The emergency steering assist will be
canceled when the system determines
that lane departure prevention control
has completed.
● Depending on operations performed
by the driver, emergency steering
assist may not operate or operation
may be canceled.
• If the accelerator pedal is depressed
strongly, the steering wheel is turned
heavily, the brake pedal is depressed,
or the turn signal lever is operated, the
system may determine that the driver
is taking evasive action and the emer-
gency steering assist may not operate.
2254-5. Using the driving support systems■ Operating conditions of each function of the pre-collision systemThe pre-collision system is enabled and the system determines that the possibility of a fron-tal collision with a detected object is , the system will not operate in the following situations:● When the vehicle has not been driven a certain amount after a terminal of the 12-volt bat-tery has been disconnected and reconnected● When the shift position is in R● When the VSC OFF indicator is illuminated (only the pre-collision warning function willbe operational)The following are the operational speeds and cancelation conditions of each function:● Pre-collision warningRelative speed between yourDetectable objectsVehicle speedvehicle and objectPreceding vehicles, stopped Approximately 3 to 110 mph Approximately 3 to 110 mphvehicles(5 to 180 km/h)(5 to 180 km/h)4Approximately 20 to 110Approximately 50 to 130Oncoming vehiclesmph (30 to 180 km/h)mph (80 to 220 km/h)DrivingApproximately 3 to 50 mph Approximately 3 to 50 mphBicycles(5 to 80 km/h)(5 to 80 km/h)Approximately 3 to 50 mph Approximately 3 to 50 mphPedestrians(5 to 80 km/h)(5 to 80 km/h)Preceding motorcycles,Approximately 3 to 110 mph Approximately 3 to 50 mphstopped motorcycles(5 to 180 km/h)(5 to 80 km/h)Approximately 20 to 110Approximately 20 to 110Oncoming motorcyclesmph (30 to 180 km/h)mph (30 to 180 km/h)While the pre-collision warning is operating, if the steering wheel is operated heavily or sud-denly, the pre-collision warning may be cancelled.● Pre-collision brake assistRelative speed between yourDetectable objectsVehicle speedvehicle and objectPreceding vehicles, stoppedApproximately 20 to 110Approximately 7 to 110 mphvehiclesmph (30 to 180 km/h)(10 to 180 km/h)Approximately 20 to 50Approximately 20 to 50Bicyclesmph (30 to 80 km/h)mph (30 to 80 km/h)
225
4-5. Using the driving support systems
■ Operating conditions of each function of the pre-collision system
The pre-collision system is enabled and the system determines that the possibility of a fron-
tal collision with a detected object is high.
However, the system will not operate in the following situations:
● When the vehicle has not been driven a certain amount after a terminal of the 12-volt bat-
tery has been disconnected and reconnected
● When the shift position is in R
● When the VSC OFF indicator is illuminated (only the pre-collision warning function will
be operational)
The following are the operational speeds and cancelation conditions of each function:
● Pre-collision warning
Relative speed between your
Detectable objects
Vehicle speed
vehicle and object
Preceding vehicles, stopped Approximately 3 to 110 mph Approximately 3 to 110 mph
vehicles
(5 to 180 km/h)
(5 to 180 km/h)
4
Approximately 20 to 110
Approximately 50 to 130
Oncoming vehicles
mph (30 to 180 km/h)
mph (80 to 220 km/h)
Driving
Approximately 3 to 50 mph Approximately 3 to 50 mph
Bicycles
(5 to 80 km/h)
(5 to 80 km/h)
Approximately 3 to 50 mph Approximately 3 to 50 mph
Pedestrians
(5 to 80 km/h)
(5 to 80 km/h)
Preceding motorcycles,
Approximately 3 to 110 mph Approximately 3 to 50 mph
stopped motorcycles
(5 to 180 km/h)
(5 to 80 km/h)
Approximately 20 to 110
Approximately 20 to 110
Oncoming motorcycles
mph (30 to 180 km/h)
mph (30 to 180 km/h)
While the pre-collision warning is operating, if the steering wheel is operated heavily or sud-
denly, the pre-collision warning may be cancelled.
● Pre-collision brake assist
Relative speed between your
Detectable objects
Vehicle speed
vehicle and object
Preceding vehicles, stopped
Approximately 20 to 110
Approximately 7 to 110 mph
vehicles
mph (30 to 180 km/h)
(10 to 180 km/h)
Approximately 20 to 50
Approximately 20 to 50
Bicycles
mph (30 to 80 km/h)
mph (30 to 80 km/h)
2264-5. Using the driving support systemsRelative speed between yourDetectable objectsVehicle speedvehicle and objectApproximately 20 to 50Approximately 20 to 50Pedestriansmph (30 to 80 km/h)mph (30 to 80 km/h)Preceding motorcycles,Approximately 20 to 110Approximately 7 to 50 mphstopped motorcyclesmph (30 to 180 km/h)(10 to 80 km/h)● Pre-collision brakingRelative speed between yourDetectable objectsVehicle speedvehicle and objectPreceding vehicles, stopped Approximately 3 to 110 mph Approximately 3 to 110 mphvehicles(5 to 180 km/h)(5 to 180 km/h)Approximately 20 to 110Approximately 50 to 130Oncoming vehiclesmph (30 to 180 km/h)mph (80 to 220 km/h)Approximately 3 to 50 mph Approximately 3 to 50 mphBicycles(5 to 80 km/h)(5 to 80 km/h)Approximately 3 to 50 mph Approximately 3 to 50 mphPedestrians(5 to 80 km/h)(5 to 80 km/h)Preceding motorcycles,Approximately 3 to 110 mph Approximately 3 to 50 mphstopped motorcycles(5 to 180 km/h)(5 to 80 km/h)Approximately 20 to 110Approximately 20 to 110Oncoming motorcyclesmph (30 to 180 km/h)mph (30 to 180 km/h)If either of the following occur while the pre-collision braking function is operating, it will becanceled:• The accelerator pedal is strongly depressed• The steering wheel is operated heavily or suddenly● Emergency steering assistThe emergency steering assist will not operate when the turn signal lights are speed between yourDetectable objectsVehicle speedvehicle and objectPreceding vehicles, stoppedApproximately 25 to 50Approximately 25 to 50vehicles, bicycles, pedestri-mph (40 to 80 km/h)mph (40 to 80 km/h)ans, motorcyclesWhile the emergency steering assist is operating, if any of the following are performed,emergency steering assist operation may be cancelled:• The accelerator pedal is strongly depressed• The steering wheel is operated heavily or suddenly
226
4-5. Using the driving support systems
Relative speed between your
Detectable objects
Vehicle speed
vehicle and object
Approximately 20 to 50
Approximately 20 to 50
Pedestrians
mph (30 to 80 km/h)
mph (30 to 80 km/h)
Preceding motorcycles,
Approximately 20 to 110
Approximately 7 to 50 mph
stopped motorcycles
mph (30 to 180 km/h)
(10 to 80 km/h)
● Pre-collision braking
Relative speed between your
Detectable objects
Vehicle speed
vehicle and object
Preceding vehicles, stopped Approximately 3 to 110 mph Approximately 3 to 110 mph
vehicles
(5 to 180 km/h)
(5 to 180 km/h)
Approximately 20 to 110
Approximately 50 to 130
Oncoming vehicles
mph (30 to 180 km/h)
mph (80 to 220 km/h)
Approximately 3 to 50 mph Approximately 3 to 50 mph
Bicycles
(5 to 80 km/h)
(5 to 80 km/h)
Approximately 3 to 50 mph Approximately 3 to 50 mph
Pedestrians
(5 to 80 km/h)
(5 to 80 km/h)
Preceding motorcycles,
Approximately 3 to 110 mph Approximately 3 to 50 mph
stopped motorcycles
(5 to 180 km/h)
(5 to 80 km/h)
Approximately 20 to 110
Approximately 20 to 110
Oncoming motorcycles
mph (30 to 180 km/h)
mph (30 to 180 km/h)
If either of the following occur while the pre-collision braking function is operating, it will be
canceled:
• The accelerator pedal is strongly depressed
• The steering wheel is operated heavily or suddenly
● Emergency steering assist
The emergency steering assist will not operate when the turn signal lights are flashing.
Relative speed between your
Detectable objects
Vehicle speed
vehicle and object
Preceding vehicles, stopped
Approximately 25 to 50
Approximately 25 to 50
vehicles, bicycles, pedestri-
mph (40 to 80 km/h)
mph (40 to 80 km/h)
ans, motorcycles
While the emergency steering assist is operating, if any of the following are performed,
emergency steering assist operation may be cancelled:
• The accelerator pedal is strongly depressed
• The steering wheel is operated heavily or suddenly
2274-5. Using the driving support systems• The brake pedal is depressed● Intersection collision avoidance support (left/right turn)The intersection collision avoidance support (for left/right turning vehicles) will not operatewhen the turn signal lights are not speedOncoming vehicleDetectable objectsVehicle speedbetween your vehi-speedcle and objectApproximately 3 toApproximately 3 toApproximately 7 toOncoming vehicles25 mph (5 to 4045 mph (5 to 7570 mph (10 to 115km/h)km/h)km/h)Approximately 3 toApproximately 3 toPedestrians20 mph (5 to 30-25 mph (5 to 40km/h)km/h)Approximately 3 toApproximately 3 toBicycles20 mph (5 to 30-30 mph (5 to 504km/h)km/h)Approximately 3 toApproximately 3 toApproximately 7 toDrivingOncoming motorcy-25 mph (5 to 4045 mph (5 to 7570 mph (10 to 115cleskm/h)km/h)km/h)● Intersection collision avoidance support (crossing vehicles)Relative speedCrossing vehicleDetectable objectsVehicle speedbetween your vehi-speedcle and object• Your vehicleApproximately 3 tospeed or lessApproximately 3 toVehicles, Motorcy-38 mph (5 to 60 • Approximately 2538 mph (5 to 60cles (side)km/h)mph or less (40km/h)km/h or less)● Acceleration Suppression at Low SpeedThe Acceleration Suppression at Low Speed function will not operate when the turn signallights are speed between yourDetectable objectsVehicle speedvehicle and objectPreceding vehicles, stoppedApproximately 0 to 9 mphApproximately 0 to 9 mphvehicles, Pedestrians, Bicy-(0 to 15 km/h)(0 to 15 km/h)cles, WallWhile the Acceleration Suppression at Low Speed function is operating, if any of the follow-ing are performed, the low speed sudden acceleration suppression function operation will
227
4-5. Using the driving support systems
• The brake pedal is depressed
● Intersection collision avoidance support (left/right turn)
The intersection collision avoidance support (for left/right turning vehicles) will not operate
when the turn signal lights are not flashing.
Relative speed
Oncoming vehicle
Detectable objects
Vehicle speed
between your vehi-
speed
cle and object
Approximately 3 to
Approximately 3 to
Approximately 7 to
Oncoming vehicles
25 mph (5 to 40
45 mph (5 to 75
70 mph (10 to 115
km/h)
km/h)
km/h)
Approximately 3 to
Approximately 3 to
Pedestrians
20 mph (5 to 30
-
25 mph (5 to 40
km/h)
km/h)
Approximately 3 to
Approximately 3 to
Bicycles
20 mph (5 to 30
-
30 mph (5 to 50
4
km/h)
km/h)
Approximately 3 to
Approximately 3 to
Approximately 7 to
Driving
Oncoming motorcy-
25 mph (5 to 40
45 mph (5 to 75
70 mph (10 to 115
cles
km/h)
km/h)
km/h)
● Intersection collision avoidance support (crossing vehicles)
Relative speed
Crossing vehicle
Detectable objects
Vehicle speed
between your vehi-
speed
cle and object
• Your vehicle
Approximately 3 to
speed or less
Approximately 3 to
Vehicles, Motorcy-
38 mph (5 to 60 • Approximately 25
38 mph (5 to 60
cles (side)
km/h)
mph or less (40
km/h)
km/h or less)
● Acceleration Suppression at Low Speed
The Acceleration Suppression at Low Speed function will not operate when the turn signal
lights are flashing.
Relative speed between your
Detectable objects
Vehicle speed
vehicle and object
Preceding vehicles, stopped
Approximately 0 to 9 mph
Approximately 0 to 9 mph
vehicles, Pedestrians, Bicy-
(0 to 15 km/h)
(0 to 15 km/h)
cles, Wall
While the Acceleration Suppression at Low Speed function is operating, if any of the follow-
ing are performed, the low speed sudden acceleration suppression function operation will
2284-5. Using the driving support systemsbe cancelled:• The accelerator pedal is released.• The steering wheel is operated heavily or suddenly■ Detection of detectable objects• When passing a detectable object that ischanging lanes or turning left/rightObjects are detected based on their size,shape, and on the ambient brightness,movement, posture and direction of adetectable object, it may not be detectedand the system may not operate system detects shapes, such as the fol-lowing, as detectable objects.• When passing a detectable object whichis stopped to make a left/right turn■ Situations in which the system mayoperate even though the possibility of acollision is not high● In certain situations, such as the following,• When a detectable object stops immedi-the system may determine that the possi-ately before entering the path of the vehi-bility of a collision is high and operate:cle• When passing a detectable object• When passing through a location with a• When changing lanes while overtaking astructure above the road (traffic sign, bill-detectable objectboard, etc.)• When suddenly approaching a detect-able object• When approaching a detectable objector other object on the roadside, such asguardrails, utility poles, trees, walls, etc.• When there is a detectable object orother object by the roadside at theentrance of a curve• When approaching an electric toll gatebarrier, parking lot barrier, or other bar-rier that opens and closes• When turning left/right and an oncomingvehicle, oncoming motorcycle, pedes-trian or bicycle crosses in front of thevehicle• When attempting to turn left/right in• When there are patterns or a paintingfront of an oncoming vehicle, oncomingahead of the vehicle that may be mis-motorcycle, pedestrian or bicycletaken for a detectable object• When turning left/right and an oncoming
228
4-5. Using the driving support systems
be cancelled:
• The accelerator pedal is released.
• The steering wheel is operated heavily or suddenly
■ Detection of detectable objects
• When passing a detectable object that is
changing lanes or turning left/right
Objects are detected based on their size,
shape, and movement.
Depending on the ambient brightness,
movement, posture and direction of a
detectable object, it may not be detected
and the system may not operate properly.
The system detects shapes, such as the fol-
lowing, as detectable objects.
• When passing a detectable object which
is stopped to make a left/right turn
■ Situations in which the system may
operate even though the possibility of a
collision is not high
● In certain situations, such as the following,
• When a detectable object stops immedi-
the system may determine that the possi-
ately before entering the path of the vehi-
bility of a collision is high and operate:
cle
• When passing a detectable object
• When passing through a location with a
• When changing lanes while overtaking a
structure above the road (traffic sign, bill-
detectable object
board, etc.)
• When suddenly approaching a detect-
able object
• When approaching a detectable object
or other object on the roadside, such as
guardrails, utility poles, trees, walls, etc.
• When there is a detectable object or
other object by the roadside at the
entrance of a curve
• When approaching an electric toll gate
barrier, parking lot barrier, or other bar-
rier that opens and closes
• When turning left/right and an oncoming
vehicle, oncoming motorcycle, pedes-
trian or bicycle crosses in front of the
vehicle
• When attempting to turn left/right in
• When there are patterns or a painting
front of an oncoming vehicle, oncoming
ahead of the vehicle that may be mis-
motorcycle, pedestrian or bicycle
taken for a detectable object
• When turning left/right and an oncoming
2294-5. Using the driving support systemsvehicle, oncoming motorcycle, pedes-umbrella, guardrail, etc.)trian or bicycle stops or changes course• When multiple detectable objects areimmediately before entering the path ofoverlappingthe vehicle• When a bright light, such as the sun, is• When turning left/right and an oncomingreflecting off of a detectable objectvehicle turns left/right in front of the vehi-• When a detectable object is white andclelooks extremely bright• When the color or brightness of a detect-able object causes it to blend in with itssurroundings• When a detectable object cuts in front ofor suddenly emerges in front of yourvehicle• When approaching a vehicle which isdiagonal• If a bicycle is a child sized bicycle, is car-rying a large load, is carrying an extra• When the steering wheel is operatedpassenger, is carrying a forward leaningtoward the path of an oncoming vehiclerider, or has an unusual shape (bicycles• When there is an object moving above orequipped with a child seat, tandem bicy-under the roadcles, etc.)4• If a pedestrian or bicycle is shorter thanapproximately 3.2 ft. (1 m) or taller thanapproximately 6.5 ft. (2 m).Driving• When the silhouette of a pedestrian orbicycle is unclear (such as when they arewearing a raincoat, long skirt, etc.)• When a pedestrian is bending forward orsquatting• When a pedestrian or bicycle is movingat high speed■ Situations in which the system may not• When a pedestrian is pushing a stroller,operate properlywheelchair, bicycle or other vehicle● In certain situations, such as the following,• When a detectable object blends in witha detectable object may not be detectedthe surrounding area, such as when it isby the front sensors, and the system maydim (at dawn or dusk) or dark (at night ornot operate properly:in a tunnel)• When a detectable object is approaching• When the vehicle has not been driven foryour vehiclea certain amount of time after the hybrid• When your vehicle or a detectable objectsystem was sta
229
4-5. Using the driving support systems
vehicle, oncoming motorcycle, pedes-
umbrella, guardrail, etc.)
trian or bicycle stops or changes course
• When multiple detectable objects are
immediately before entering the path of
overlapping
the vehicle
• When a bright light, such as the sun, is
• When turning left/right and an oncoming
reflecting off of a detectable object
vehicle turns left/right in front of the vehi-
• When a detectable object is white and
cle
looks extremely bright
• When the color or brightness of a detect-
able object causes it to blend in with its
surroundings
• When a detectable object cuts in front of
or suddenly emerges in front of your
vehicle
• When approaching a vehicle which is
diagonal
• If a bicycle is a child sized bicycle, is car-
rying a large load, is carrying an extra
• When the steering wheel is operated
passenger, is carrying a forward leaning
toward the path of an oncoming vehicle
rider, or has an unusual shape (bicycles
• When there is an object moving above or
equipped with a child seat, tandem bicy-
under the road
cles, etc.)
4
• If a pedestrian or bicycle is shorter than
approximately 3.2 ft. (1 m) or taller than
approximately 6.5 ft. (2 m).
Driving
• When the silhouette of a pedestrian or
bicycle is unclear (such as when they are
wearing a raincoat, long skirt, etc.)
• When a pedestrian is bending forward or
squatting
• When a pedestrian or bicycle is moving
at high speed
■ Situations in which the system may not
• When a pedestrian is pushing a stroller,
operate properly
wheelchair, bicycle or other vehicle
● In certain situations, such as the following,
• When a detectable object blends in with
a detectable object may not be detected
the surrounding area, such as when it is
by the front sensors, and the system may
dim (at dawn or dusk) or dark (at night or
not operate properly:
in a tunnel)
• When a detectable object is approaching
• When the vehicle has not been driven for
your vehicle
a certain amount of time after the hybrid
• When your vehicle or a detectable object
system was started
is wandering
• While turning left/right or a few seconds
• When a detectable object makes an
after turning left/right
abrupt maneuver (such as sudden swerv-
• While driving around a curve and a few
ing, acceleration or deceleration)
seconds after driving around a curve
• When suddenly approaching a detect-
• When turning left/right and an oncoming
able object
vehicle is driving in a lane 3 or more lanes
• When the detectable object is near a
from the vehicle
wall, fence, guardrail, manhole cover,
• When turning left/right and the direction
steel plate on the road surface, or
of the vehicle differs greatly from the
another vehicle
direction traffic flows in the oncoming
• When there is a structure above a
lane
detectable object
• When part of a detectable object is hid-
den by another object (large luggage,
2304-5. Using the driving support systemsChanging the pre-collision set-ting The pre-collision system can beenabled/disabled through a cus-tomize setting. (P.466)The system is enabled each time the power• When turning left/right, a pedestrian orswitch is turned to behind the vehicle comes in frontof it as if it overtakes the vehicle When the system is disabled, thePCS warning light will illuminateand a message will be displayed onthe multi-information display. The pre-collision setting can bechanged on the customize settings.(P.466) When the pre-collision warning tim-• When at an intersection, the approachingcrossing vehicle is long in overall length,ing is changed, the emergencysuch as a large truck, towing trailer, assist timing will also be● In addition to the preceding, in certain , such as the following, the emer-When “Later” is selected, the emer-gency steering assist may not operateproperly:gency steering assist will not oper-• When a detectable object is too close toate in most vehicle• When there is insufficient space to per- When the dynamic radar cruiseform evasive steering maneuvers or ancontrol is operating, the pre-colli-obstruction exists in the evasion direction• When there is an oncoming vehiclesion warning will operate at the“Earlier” timing, regardless of the● In addition to the preceding, in certain sit-uations, such as the following, walls mayuser be detected as a target object and theAcceleration Suppression at Low Speedfunction may not operate properly:• When scenery behind the wall is visible,such as a glass door, grid fence, etc.• When the wall is slanted or low• When the wall is narrow, such as a pole,etc.• When the wall is made of plants, such as ahedge, etc.• When the road, etc. is reflected on thewall• When the vehicle is approaching the wallat an angle
230
4-5. Using the driving support systems
Changing the pre-collision set-
ting
 The pre-collision system can be
enabled/disabled through a cus-
tomize setting. (P.466)
The system is enabled each time the power
• When turning left/right, a pedestrian or
switch is turned to ON.
bicycle behind the vehicle comes in front
of it as if it overtakes the vehicle
 When the system is disabled, the
PCS warning light will illuminate
and a message will be displayed on
the multi-information display.
 The pre-collision setting can be
changed on the customize settings.
(P.466)
 When the pre-collision warning tim-
• When at an intersection, the approaching
crossing vehicle is long in overall length,
ing is changed, the emergency
such as a large truck, towing trailer, etc.
steering assist timing will also be
● In addition to the preceding, in certain sit-
changed.
uations, such as the following, the emer-
When “Later” is selected, the emer-
gency steering assist may not operate
properly:
gency steering assist will not oper-
• When a detectable object is too close to
ate in most cases.
the vehicle
• When there is insufficient space to per-
 When the dynamic radar cruise
form evasive steering maneuvers or an
control is operating, the pre-colli-
obstruction exists in the evasion direction
• When there is an oncoming vehicle
sion warning will operate at the
“Earlier” timing, regardless of the
● In addition to the preceding, in certain sit-
uations, such as the following, walls may
user setting.
not be detected as a target object and the
Acceleration Suppression at Low Speed
function may not operate properly:
• When scenery behind the wall is visible,
such as a glass door, grid fence, etc.
• When the wall is slanted or low
• When the wall is narrow, such as a pole,
etc.
• When the wall is made of plants, such as a
hedge, etc.
• When the road, etc. is reflected on the
wall
• When the vehicle is approaching the wall
at an angle
2314-5. Using the driving support systemsLTA (Lane Tracing Assist)LTA functions When driving on a road with clearlane lines with the dynamic radarcruise control operating, lane linesand preceding and surroundingvehicles are detected using the frontcamera and radar sensor, and thesteering wheel is operated to main-tain the vehicle’s lane this function only on highways the dynamic radar cruise control is not4operating, the function will not operate. When the function is operating, ifIn situations where the lane lines are diffi-Drivingthe vehicle is likely to depart from itscult to see or are not visible, such as whenin a traffic jam, support will be providedlane, the driver will be alerted via ausing the path of preceding and surround-display and the buzzer sounds, check the areaIf the system determines that the steeringaround the vehicle and carefully operatewheel has not been operated for a certainthe steering wheel to move the vehicleamount of time or the steering wheel is notback to the center of the firmly gripped, the driver will bealerted and this function will be the steering wheel is firmly gripped, thefunction will begin operating again.
231
4-5. Using the driving support systems
LTA (Lane Tracing Assist)
LTA functions
 When driving on a road with clear
lane lines with the dynamic radar
cruise control operating, lane lines
and preceding and surrounding
vehicles are detected using the front
camera and radar sensor, and the
steering wheel is operated to main-
tain the vehicle’s lane position.
Use this function only on highways and
expressways.
If the dynamic radar cruise control is not
4
operating, the function will not operate.
 When the function is operating, if
In situations where the lane lines are diffi-
Driving
the vehicle is likely to depart from its
cult to see or are not visible, such as when
in a traffic jam, support will be provided
lane, the driver will be alerted via a
using the path of preceding and surround-
display and buzzer.
ing vehicles.
When the buzzer sounds, check the area
If the system determines that the steering
around the vehicle and carefully operate
wheel has not been operated for a certain
the steering wheel to move the vehicle
amount of time or the steering wheel is not
back to the center of the lane.
being firmly gripped, the driver will be
alerted and this function will be temporarily
canceled.
If the steering wheel is firmly gripped, the
function will begin operating again.
2324-5. Using the driving support systems● The dynamic radar cruise control is oper-ating.● The lane width is approximately 10 to 13ft. (3 to 4 m).● The turn signal lever is not being oper-ated.● The vehicle is not being driven around asharp curve.● The vehicle is not accelerating or decel-erating more than a certain amount.● The steering wheel is not being turnedwith a large force.● The hands off steering wheel warning(P.232) is not operating.● The vehicle is being driven in the centerof a lane.■ Temporary cancelation of functions● When the operating conditions are nolonger met, a function may be temporar-ily canceled. However, when the opera-WARNINGtion conditions are met again, operation■ Before using the LTA systemof the function will automatically berestored. (P.232)● Do not overly rely on the LTA LTA system is not a system which● If the operating conditions of a functionprovides automated assistance in driv-are no longer met while the function ising and it is not a system whichoperating, a buzzer may sound to indi-reduces the amount of attention nec-cate that the function has been temporar-essary for safe driving. The driver isily responsible for paying attention● The steering assist operation of the func-to their surroundings and operatingtion can be overridden by the steeringthe steering wheel as necessary towheel operation of the safety. Also, the driver isresponsible for taking adequate■ Lane departure warning function whenbreaks when fatigued, such as whenthe LTA is operatingdriving for a long time.● Even if the LDA warning method ischanged to vibration of the steering● Failure to perform appropriate drivingwheel, if the vehicle deviates from theoperations and pay careful attentionlane while the LTA is operating, the warn-may lead to an buzzer will sound to alert the driver.● When not using the LTA system, turn it● If steering wheel operation equivalent tooff using the LTA necessary for a
232
4-5. Using the driving support systems
● The dynamic radar cruise control is oper-
ating.
● The lane width is approximately 10 to 13
ft. (3 to 4 m).
● The turn signal lever is not being oper-
ated.
● The vehicle is not being driven around a
sharp curve.
● The vehicle is not accelerating or decel-
erating more than a certain amount.
● The steering wheel is not being turned
with a large force.
● The hands off steering wheel warning
(P.232) is not operating.
● The vehicle is being driven in the center
of a lane.
■ Temporary cancelation of functions
● When the operating conditions are no
longer met, a function may be temporar-
ily canceled. However, when the opera-
WARNING
tion conditions are met again, operation
■ Before using the LTA system
of the function will automatically be
restored. (P.232)
● Do not overly rely on the LTA system.
The LTA system is not a system which
● If the operating conditions of a function
provides automated assistance in driv-
are no longer met while the function is
ing and it is not a system which
operating, a buzzer may sound to indi-
reduces the amount of attention nec-
cate that the function has been temporar-
essary for safe driving. The driver is
ily canceled.
solely responsible for paying attention
● The steering assist operation of the func-
to their surroundings and operating
tion can be overridden by the steering
the steering wheel as necessary to
wheel operation of the driver.
ensure safety. Also, the driver is
responsible for taking adequate
■ Lane departure warning function when
breaks when fatigued, such as when
the LTA is operating
driving for a long time.
● Even if the LDA warning method is
changed to vibration of the steering
● Failure to perform appropriate driving
wheel, if the vehicle deviates from the
operations and pay careful attention
lane while the LTA is operating, the warn-
may lead to an accident.
ing buzzer will sound to alert the driver.
● When not using the LTA system, turn it
● If steering wheel operation equivalent to
off using the LTA switch.
that necessary for a lane change is
detected, the system will determine the
vehicle is not deviating from the lane and
■ Operating conditions of function
the warning will not operate.
This function is operable when all of the fol-
■ Hands off steering wheel warning oper-
lowing conditions are met:
ation
● The LTA system detects lane lines or the
● When the system determines the driver is
path of preceding or surrounding vehi-
not holding the steering wheel, a mes-
cles.
2334-5. Using the driving support systemssage urging the driver to grip the steeringwheel and the icon shown in the illustra-tion will be displayed on the multi-infor-mation display to warn the driver. If thesystem detects that the steering wheel isheld, the warning will be canceled. Whenusing the system, make sure to grip thesteering wheel firmly, regardless ofwhether the warning is operating or ■ Situations in which the functions maynot operate properlyIn the following situations, the functionsmay not operate properly and the vehi-cle may depart from its lane. Do not● If no operations are detected for a certainoverly rely on these functions. The driveramount of time, the warning will operateis solely responsible for paying attention4and the function will be temporarily can-to their surroundings and operating theceled. This warning may also operate ifsteering wheel as necessary to ensurethe driver only operates steering wheel amount continuously.● When a preceding or surrounding■ Situations in which the hands off steer-vehicle changes lanes (Your vehicleing wheel warning may not operatemay follow the preceding or surround-properlying vehicle and also change lanes)● Depending on the condition of the vehi-cle, handle control condition and roadsurface, the warning function may the systemThe LTA will change betweenON/OFF each time the LTA switch is● When a preceding or is swaying (Your vehicle maysway accordingly and depart from theWhen the LTA is ON, the LTA indicatorlane)will illuminate.● When a preceding or surroundingvehicle departs from a lane (Yourvehicle may follow the preceding orsurrounding vehicle and also departfrom the lane)
233
4-5. Using the driving support systems
sage urging the driver to grip the steering
wheel and the icon shown in the illustra-
tion will be displayed on the multi-infor-
mation display to warn the driver. If the
system detects that the steering wheel is
held, the warning will be canceled. When
using the system, make sure to grip the
steering wheel firmly, regardless of
whether the warning is operating or not.
WARNING
■ Situations in which the functions may
not operate properly
In the following situations, the functions
may not operate properly and the vehi-
cle may depart from its lane. Do not
● If no operations are detected for a certain
overly rely on these functions. The driver
amount of time, the warning will operate
is solely responsible for paying attention
4
and the function will be temporarily can-
to their surroundings and operating the
celed. This warning may also operate if
steering wheel as necessary to ensure
the driver only operates steering wheel a
safety.
Driving
small amount continuously.
● When a preceding or surrounding
■ Situations in which the hands off steer-
vehicle changes lanes (Your vehicle
ing wheel warning may not operate
may follow the preceding or surround-
properly
ing vehicle and also change lanes)
● Depending on the condition of the vehi-
cle, handle control condition and road
surface, the warning function may not
operate.
Enabling/disabling the system
The LTA will change between
ON/OFF each time the LTA switch is
● When a preceding or surrounding
pressed.
vehicle is swaying (Your vehicle may
sway accordingly and depart from the
When the LTA is ON, the LTA indicator
lane)
will illuminate.
● When a preceding or surrounding
vehicle departs from a lane (Your
vehicle may follow the preceding or
surrounding vehicle and also depart
from the lane)
2344-5. Using the driving support systemsWARNING● When a preceding or surroundingvehicle is being driven extremely closeto the left/right lane line (Your vehiclemay follow the preceding or surround-ing vehicle accordingly and departfrom the lane)● When there are moving objects orstructures in the surrounding area(Depending on the position of themoving object or structure relative toyour vehicle, your vehicle may sway)● When the vehicle is struck by a cross-wind or the turbulence of other nearbyvehicles● Situations in which the sensors may notoperate properly: P.218● Situations in which the lane may not bedetected: P.220● When it is necessary to disable the sys-tem: P.215Operation display of steering wheel operation supportThe operating state of the LTA system is displaySteering iconSituationLTA is on standbyWhiteGray/WhiteGrayLTA is operatingGreenGreenGreenThe vehicle is depart-ing the lane towardthe side which theYellowYellowlane display is flash-GreenFlashingFlashinging
234
4-5. Using the driving support systems
WARNING
● When a preceding or surrounding
vehicle is being driven extremely close
to the left/right lane line (Your vehicle
may follow the preceding or surround-
ing vehicle accordingly and depart
from the lane)
● When there are moving objects or
structures in the surrounding area
(Depending on the position of the
moving object or structure relative to
your vehicle, your vehicle may sway)
● When the vehicle is struck by a cross-
wind or the turbulence of other nearby
vehicles
● Situations in which the sensors may not
operate properly: P.218
● Situations in which the lane may not be
detected: P.220
● When it is necessary to disable the sys-
tem: P.215
Operation display of steering wheel operation support
The operating state of the LTA system is indicated.
Indicator
Lane display
Steering icon
Situation
LTA is on standby
White
Gray/White
Gray
LTA is operating
Green
Green
Green
The vehicle is depart-
ing the lane toward
the side which the
Yellow
Yellow
lane display is flash-
Green
Flashing
Flashing
ing
2354-5. Using the driving support systemsLDA (Lane Departure Alert)Basic functionsThe LDA system warns the driver if thevehicle may deviate from the currentlane or course * , and also can slightlyoperate the steering wheel to helpavoid deviation from the lane orcourse * .The front camera is used to detect lanelines or a course * .*: Boundary between the asphalt andgrass, soil, etc., or structures, such as a4curb, guardrail, etc.■ Lane departure alert function■ Lane departure prevention func-DrivingtionWhen the system determines that thevehicle might depart from its lane orIf the system determines that the vehi-course * , a warning is displayed on acle is likely to depart from its lane orcourse * , it provides assistance throughdisplay, and either a warning buzzerwill sound or the steering wheel willsteering wheel operations to helpvibrate to alert the deviation from the lane the area around your vehicle andcarefully operate the steering wheel toIf the system determines that the steeringmove the vehicle back to the center of thewheel has not been operated for a certainlane or course * .amount of time or the steering wheel is notbeing firmly gripped, a warning messageIf the system determines that the vehiclemay be displayed and a warning buzzermay collide with a vehicle in an adjacentmay sound to alert the , the lane departure alert will operateIf the system determines that the vehicleeven if the turn signals are collide with a vehicle in an adjacent*: Boundary between the asphalt andlane, the lane departure prevention func-grass, soil, etc., or structures, such as ation will operate even if the turn signals arecurb, guardrail, .*: Boundary between the asphalt andgrass, soil, etc., or structures, such as acurb, guardrail, etc.
235
4-5. Using the driving support systems
LDA (Lane Departure Alert)
Basic functions
The LDA system warns the driver if the
vehicle may deviate from the current
lane or course * , and also can slightly
operate the steering wheel to help
avoid deviation from the lane or
course * .
The front camera is used to detect lane
lines or a course * .
*
: Boundary between the asphalt and
grass, soil, etc., or structures, such as a
4
curb, guardrail, etc.
■ Lane departure alert function
■ Lane departure prevention func-
Driving
tion
When the system determines that the
vehicle might depart from its lane or
If the system determines that the vehi-
course * , a warning is displayed on a
cle is likely to depart from its lane or
course * , it provides assistance through
display, and either a warning buzzer
will sound or the steering wheel will
steering wheel operations to help
vibrate to alert the driver.
avoid deviation from the lane or
course.
Check the area around your vehicle and
carefully operate the steering wheel to
If the system determines that the steering
move the vehicle back to the center of the
wheel has not been operated for a certain
lane or course * .
amount of time or the steering wheel is not
being firmly gripped, a warning message
If the system determines that the vehicle
may be displayed and a warning buzzer
may collide with a vehicle in an adjacent
may sound to alert the driver.
lane, the lane departure alert will operate
If the system determines that the vehicle
even if the turn signals are operating.
may collide with a vehicle in an adjacent
*
: Boundary between the asphalt and
lane, the lane departure prevention func-
grass, soil, etc., or structures, such as a
tion will operate even if the turn signals are
curb, guardrail, etc.
operating.
*
: Boundary between the asphalt and
grass, soil, etc., or structures, such as a
curb, guardrail, etc.
2364-5. Using the driving support systemsWARNING■ Before using the LDA system● Do not overly rely on the LDA LDA system is not a system whichprovides automated assistance in driv-ing and it is not a system whichreduces the amount of attention nec-essary for safe driving. The driver issolely responsible for paying attentionto their surroundings and operatingthe steering wheel as necessary toensure safety. Also, the driver isresponsible for taking adequatebreaks when fatigued, such as whendriving for a long time.● Failure to perform appropriate drivingoperations and pay careful attentionmay lead to an accident.■ Break suggestion function■ Operating conditions of each function● Lane departure alert/prevention functionIf the vehicle is swaying, a message willThis function is operable when all of the fol-be displayed and a buzzer will sound tolowing conditions are met:urge the driver to take a break.• The vehicle speed is approximately 30mph (50 km/h) or may be possible when the vehi-cle speed is approximately 25 mph (40km/h) or more if vehicles, motorcycles,bicycles, or pedestrians are detected nearthe lane.• The system recognizes a lane or course * .(When recognized on only one side, thesystem will operate only for the recog-nized side.)• The lane width is approximately 9.8 ft. (3m) or more.• The turn signal lever is not being oper-ated.(Except when a vehicle is detected in thedirection that the turn signal lever is oper-ated.)• The vehicle is not being driven around asharp curve.• The vehicle is not accelerating or decel-erating more than a certain amount.• The steering wheel is not being turnedsufficiently to perform a lane change.
236
4-5. Using the driving support systems
WARNING
■ Before using the LDA system
● Do not overly rely on the LDA system.
The LDA system is not a system which
provides automated assistance in driv-
ing and it is not a system which
reduces the amount of attention nec-
essary for safe driving. The driver is
solely responsible for paying attention
to their surroundings and operating
the steering wheel as necessary to
ensure safety. Also, the driver is
responsible for taking adequate
breaks when fatigued, such as when
driving for a long time.
● Failure to perform appropriate driving
operations and pay careful attention
may lead to an accident.
■ Break suggestion function
■ Operating conditions of each function
● Lane departure alert/prevention function
If the vehicle is swaying, a message will
This function is operable when all of the fol-
be displayed and a buzzer will sound to
lowing conditions are met:
urge the driver to take a break.
• The vehicle speed is approximately 30
mph (50 km/h) or more.
Operation may be possible when the vehi-
cle speed is approximately 25 mph (40
km/h) or more if vehicles, motorcycles,
bicycles, or pedestrians are detected near
the lane.
• The system recognizes a lane or course * .
(When recognized on only one side, the
system will operate only for the recog-
nized side.)
• The lane width is approximately 9.8 ft. (3
m) or more.
• The turn signal lever is not being oper-
ated.
(Except when a vehicle is detected in the
direction that the turn signal lever is oper-
ated.)
• The vehicle is not being driven around a
sharp curve.
• The vehicle is not accelerating or decel-
erating more than a certain amount.
• The steering wheel is not being turned
sufficiently to perform a lane change.
2374-5. Using the driving support systems• When the VSC or TRAC system is notsound to warn the driver. When using theturned offsystem, make sure to grip the steeringwheel firmly, regardless of whether the*: Boundary between the asphalt and grass,warning is operating or , etc., or structures, such as a curb,guardrail, etc.■ Temporary cancellation of functionsWhen the operating conditions are no lon-ger met, a function may be temporarily can-celed. However, when the operationconditions are met again, operation of thefunction will automatically be restored.(P.236)● When the system determines that the■ Operation of the lane departure alertdriver is not securely holding the steeringfunction/lane departure preventionwheel, or the steering wheel is not beingfunctionoperated when the steering assist opera-tion of the lane departure prevention● Depending on the vehicle speed, roadfunction is operatingconditions, lane departure angle, etc.,operation of the lane departure preven-Except for Puerto Rico: The length of time4tion function may not be felt or the func-that the warning buzzer operates willtion may not longer as the frequency of the● Depending on the conditions, the warn-Drivingsteering assist operating increases. If theing buzzer may operate even if vibrationsystem judges that the steering wheel hasis selected through a customize operated, the warning buzzer will● If a course * is not clear or straight, departure alert function or laneFor Puerto Rico: The length of time that thedeparture prevention function may buzzer operates will become lon-ger as the frequency of the steering assist● The lane departure alert function or lanedeparture prevention function may notoperating increases. Even if the systemoperate if the system judges that the vehi-judges that the steering wheel has beencle is intentionally being steered to avoidoperated, the warning buzzer will sound fora pedestrian or parked vehicle.a
237
4-5. Using the driving support systems
• When the VSC or TRAC system is not
sound to warn the driver. When using the
turned off
system, make sure to grip the steering
wheel firmly, regardless of whether the
*
: Boundary between the asphalt and grass,
warning is operating or not.
soil, etc., or structures, such as a curb,
guardrail, etc.
■ Temporary cancellation of functions
When the operating conditions are no lon-
ger met, a function may be temporarily can-
celed. However, when the operation
conditions are met again, operation of the
function will automatically be restored.
(P.236)
● When the system determines that the
■ Operation of the lane departure alert
driver is not securely holding the steering
function/lane departure prevention
wheel, or the steering wheel is not being
function
operated when the steering assist opera-
tion of the lane departure prevention
● Depending on the vehicle speed, road
function is operating
conditions, lane departure angle, etc.,
operation of the lane departure preven-
Except for Puerto Rico: The length of time
4
tion function may not be felt or the func-
that the warning buzzer operates will
tion may not operate.
become longer as the frequency of the
● Depending on the conditions, the warn-
Driving
steering assist operating increases. If the
ing buzzer may operate even if vibration
system judges that the steering wheel has
is selected through a customize setting.
been operated, the warning buzzer will
● If a course * is not clear or straight, the
stop.
lane departure alert function or lane
For Puerto Rico: The length of time that the
departure prevention function may not
operate.
warning buzzer operates will become lon-
ger as the frequency of the steering assist
● The lane departure alert function or lane
departure prevention function may not
operating increases. Even if the system
operate if the system judges that the vehi-
judges that the steering wheel has been
cle is intentionally being steered to avoid
operated, the warning buzzer will sound for
a pedestrian or parked vehicle.
a certain amount of time.
● It may not be possible for the system to
judge if there is danger of a collision with
■ Break suggestion function
a vehicle in an adjacent lane.
This function is operable when all of the fol-
● The steering assist operation of the lane
lowing conditions are met:
departure prevention function can be
● The vehicle speed is approximately 40
overridden by the steering wheel opera-
mph (65 km/h) or more. *1
tion of the driver.
* : Boundary between the asphalt and grass,
● The vehicle speed is approximately 32
mph (50 km/h) or more. *2
soil, etc., or structures, such as a curb,
guardrail, etc.
● The lane width is approximately 9.8 ft. (3
m) or more.
■ Hands off steering wheel warning oper-
Depending on the condition of the vehicle
ation
and road surface, the break suggestion
In the following situations, a message urging
function may not operate.
the driver to operate the steering wheel and
an icon will be displayed and a buzzer will
2384-5. Using the driving support systemsWARNING■ Situations in which the system maynot operate properlyIn the following situations, the systemmay not operate properly and the vehi-cle may depart from its lane. Do notoverly rely on these functions. The driveris solely responsible for paying attentionPress themeter control switch to turnto their surroundings and operating thesteering wheel as necessary to ensureoff the pressed, the message of the● When the boundary between thebreak suggestion function will remain dis-asphalt and grass, soil, etc., or , such as a curb, guardrail, etc. isnot clear or straight*1: For Puerto Rico● When the vehicle is struck by a cross-*2: Except for Puerto Ricowind or the turbulence of other nearbyvehiclesChanging LDA settings● Situations in which the lane may not bedetected: P.220 The LDA system can be● Situations in which the sensors may notenabled/disabled through a cus-operate properly: P.218tomize setting. (P.466)● Situations in which some or all of the The settings of the LDA can befunctions of the system cannot oper-ate: P.220changed on the customize settings.(P.466)● When it is necessary to disable the sys-tem: P.215Displays and system operationThe operating state of the lane departure alert function and steering assist opera-tion of the lane departure prevention function are indicated. Except for Puerto RicoIndicatorLane displaySteering iconConditionNot illuminated Not illuminated Not illuminatedSystem disabledLane lines are not detected by theNot illuminatedsystemWhiteGray
238
4-5. Using the driving support systems
WARNING
■ Situations in which the system may
not operate properly
In the following situations, the system
may not operate properly and the vehi-
cle may depart from its lane. Do not
overly rely on these functions. The driver
is solely responsible for paying attention
Press the
meter control switch to turn
to their surroundings and operating the
steering wheel as necessary to ensure
off the message.
safety.
Unless
is pressed, the message of the
● When the boundary between the
break suggestion function will remain dis-
asphalt and grass, soil, etc., or struc-
played.
tures, such as a curb, guardrail, etc. is
not clear or straight
*1
: For Puerto Rico
● When the vehicle is struck by a cross-
*2
: Except for Puerto Rico
wind or the turbulence of other nearby
vehicles
Changing LDA settings
● Situations in which the lane may not be
detected: P.220
 The LDA system can be
● Situations in which the sensors may not
enabled/disabled through a cus-
operate properly: P.218
tomize setting. (P.466)
● Situations in which some or all of the
 The settings of the LDA can be
functions of the system cannot oper-
ate: P.220
changed on the customize settings.
(P.466)
● When it is necessary to disable the sys-
tem: P.215
Displays and system operation
The operating state of the lane departure alert function and steering assist opera-
tion of the lane departure prevention function are indicated.
 Except for Puerto Rico
Indicator
Lane display
Steering icon
Condition
Not illuminated Not illuminated Not illuminated
System disabled
Lane lines are not detected by the
Not illuminated
system
White
Gray
2394-5. Using the driving support systemsIndicatorLane displaySteering iconConditionLane lines are detected by the sys-Not illuminatedtemWhiteWhiteLane departure alert function isNot illuminated operating for the side which the laneYellowYellowdisplay is flashingFlashingFlashingLane departure prevention functionis operating for the side which thelane display is illuminatedGreenGreenGreenLane departure alert function/lanedeparture prevention function is4YellowYellowoperating for the side which the laneGreendisplay is flashingFlashingFlashingDriving For Puerto RicoIndicatorLane displaySteering iconSituationNot illuminated Not illuminated System disabledYellowIlluminatedLane lines are not detected by theNot illuminatedNot illuminatedsystemGrayLane lines are detected by the sys-Not illuminatedNot illuminatedtemWhiteLane departure alert function isNot illuminated operating for the side which the laneYellowYellowdisplay is flashingFlashingFlashing
239
4-5. Using the driving support systems
Indicator
Lane display
Steering icon
Condition
Lane lines are detected by the sys-
Not illuminated
tem
White
White
Lane departure alert function is
Not illuminated operating for the side which the lane
Yellow
Yellow
display is flashing
Flashing
Flashing
Lane departure prevention function
is operating for the side which the
lane display is illuminated
Green
Green
Green
Lane departure alert function/lane
departure prevention function is
4
Yellow
Yellow
operating for the side which the lane
Green
display is flashing
Flashing
Flashing
Driving
 For Puerto Rico
Indicator
Lane display
Steering icon
Situation
Not illuminated Not illuminated System disabled
Yellow
Illuminated
Lane lines are not detected by the
Not illuminated
Not illuminated
system
Gray
Lane lines are detected by the sys-
Not illuminated
Not illuminated
tem
White
Lane departure alert function is
Not illuminated operating for the side which the lane
Yellow
Yellow
display is flashing
Flashing
Flashing
2404-5. Using the driving support systemsIndicatorLane displaySteering iconSituationLane departure prevention functionis operating for the side which thelane display is illuminatedGreenGreenGreenLane departure alert function/lanedeparture prevention function isYellowoperating for the side which the laneYellowGreendisplay is flashingFlashingFlashing
240
4-5. Using the driving support systems
Indicator
Lane display
Steering icon
Situation
Lane departure prevention function
is operating for the side which the
lane display is illuminated
Green
Green
Green
Lane departure alert function/lane
departure prevention function is
Yellow
operating for the side which the lane
Yellow
Green
display is flashing
Flashing
Flashing
2414-5. Using the driving support systemsPDA (Proactive driving● The proactive driving assist is not asystem which reduces the amount ofassist)attention necessary for safe if the system is operating cor-rectly, the surrounding conditions asWhen a detectable objectrecognized by the driver and detected(P.241) is detected, the proac-by the system may differ. It is neces-sary for the driver to pay attention,tive driving assist operates theassess risks, and ensure safety. Over-brakes and steering wheel to helpreliance on this system to drive theprevent the vehicle from approach-vehicle safely may lead to an accidentresulting in death or serious too close to the object.● Proactive driving assist is not a systemWARNINGwhich allows for inattentive driving andis not a system which assists in poor■ For safe usevisibility conditions. The driver is solelyDriving safely is solely the responsibilityresponsible for paying attention toof the surroundings and driving safely.● The proactive driving assist is■ When turning proactive driving assist4designed to provide some assistanceofffor regular braking and steering oper-● Situations in which the sensors may notations, as well as helping to prevent theoperate properly: P.218Drivingvehicle from approaching too close toa detectable object. However, the● When it is necessary to disable the sys-scope of this assistance is : P.215The driver should perform brake andsteering operations as necessary. Readthe following items carefully. Do notoverly rely on the proactive driving assistand always drive carefully. (P.243)System operating conditions and detectable objectsAccording to the driving conditions, the operation and detectable objects of theproactive driving assist will change as follows.
241
4-5. Using the driving support systems
PDA (Proactive driving
● The proactive driving assist is not a
system which reduces the amount of
assist)
attention necessary for safe driving.
Even if the system is operating cor-
rectly, the surrounding conditions as
When a detectable object
recognized by the driver and detected
(P.241) is detected, the proac-
by the system may differ. It is neces-
sary for the driver to pay attention,
tive driving assist operates the
assess risks, and ensure safety. Over-
brakes and steering wheel to help
reliance on this system to drive the
prevent the vehicle from approach-
vehicle safely may lead to an accident
resulting in death or serious injury.
ing too close to the object.
● Proactive driving assist is not a system
WARNING
which allows for inattentive driving and
is not a system which assists in poor
■ For safe use
visibility conditions. The driver is solely
Driving safely is solely the responsibility
responsible for paying attention to
of the driver.
their surroundings and driving safely.
● The proactive driving assist is
■ When turning proactive driving assist
4
designed to provide some assistance
off
for regular braking and steering oper-
● Situations in which the sensors may not
ations, as well as helping to prevent the
operate properly: P.218
Driving
vehicle from approaching too close to
a detectable object. However, the
● When it is necessary to disable the sys-
scope of this assistance is limited.
tem: P.215
The driver should perform brake and
steering operations as necessary. Read
the following items carefully. Do not
overly rely on the proactive driving assist
and always drive carefully. (P.243)
System operating conditions and detectable objects
According to the driving conditions, the operation and detectable objects of the
proactive driving assist will change as follows.
2424-5. Using the driving support systemsFunctionConditionsOperationDetectable objectsAssistance with someA detectable object brake operations is Pedestriansis detected crossing provided in order to Bicycliststhe roadreduce the possibilityof a with somebrake and steeringwheel operations areprovided accordingto the surroundingObstacle Anticipa-conditions to helption Assist (OAA)prevent the vehicleA detectable object from approaching  Pedestrianstoo close to a Bicyclistsis detected on thedetectedobject.  Parked vehiclesside of the roadAssistance withsteering wheel oper-ations is providedwithin a range thatthe vehicle will notdeviate from its cur-rent lane.A preceding vehicle The vehicle is gentlyor an adjacent vehi- decelerated so that Preceding vehiclescle cutting in front of the vehicle-to-vehi- Motorcyclesthe vehicle iscle distance will notdetectedbe excessively AssistThe vehicle is gently(DA)decelerated if theA curve is detectedvehicle speed isNoneahead of the vehicle determined to be toohigh for the system antici-pates the driver’sSteering Assist (SA)Lane is detectedoperation and sup- Noneports the operation ofthe steering wheel.
242
4-5. Using the driving support systems
Function
Conditions
Operation
Detectable objects
Assistance with some
A detectable object brake operations is
 Pedestrians
is detected crossing provided in order to
 Bicyclists
the road
reduce the possibility
of a collision.
Assistance with some
brake and steering
wheel operations are
provided according
to the surrounding
Obstacle Anticipa-
conditions to help
tion Assist (OAA)
prevent the vehicle
A detectable object from approaching  Pedestrians
too close to a
 Bicyclists
is detected on the
detected
object.  Parked vehicles
side of the road
Assistance with
steering wheel oper-
ations is provided
within a range that
the vehicle will not
deviate from its cur-
rent lane.
A preceding vehicle The vehicle is gently
or an adjacent vehi- decelerated so that
 Preceding vehicles
cle cutting in front of the vehicle-to-vehi-
 Motorcycles
the vehicle is
cle distance will not
detected
be excessively short.
Deceleration Assist
The vehicle is gently
(DA)
decelerated if the
A curve is detected
vehicle speed is
None
ahead of the vehicle determined to be too
high for the curve
ahead.
The system antici-
pates the driver’s
Steering Assist (SA)
Lane is detected
operation and sup- None
ports the operation of
the steering wheel.
2434-5. Using the driving support systemsdetected■ Vehicle speeds at which the system can• When the brake pedal has beenoperatedepressed• When the accelerator pedal has been● Detectable object crossing the roaddepressedassistance• When the steering wheel has been oper-Approximately 20 to 35 mph (30 to 60ated with more than a certain amount ofkm/h)force• When the turn signal lever is operated to● Detectable object on the side of the roadthe left/right turn positionassistanceApproximately 20 to 35 mph (30 to 60WARNINGkm/h)■ Situations in which the system may● Preceding vehicle deceleration assis-not operate properlytance● Situations in which the lane may not beApproximately 15 mph (20 km/h) or moredetected: P.220● Curve deceleration assistance● When a detectable object stopsApproximately 15 mph (20 km/h) or moreimmediately before entering the path4of the vehicle● Steering assist within a laneApproximately 5 to 80 mph (10 to 140● When passing extremely close to akm/h)detectable object behind a guardrail,Drivingfence, etc.■ System operation will be canceled when● When changing lanes while overtak-● In the following situations, system opera-ing a detectable objecttion will be canceled:• When the dynamic radar cruise control● When passing a detectable object thator cruise control is operatingis changing lanes or turning left/right• When the PCS is off• Situations in which some or all of the● When there are objects (guardrails,functions of the system cannot operate:power poles, trees, walls, fences,P.220poles, traffic cones, mailboxes, etc.) in• When the P, R or N shift position isthe surrounding areaselected• The driver’s seat belt is unfastened● When there are patterns or a paintingahead of the vehicle that may be mis-● In the following situations, the braketaken for a detectable objectoperation assist will be canceled:• Approximately 9 mph (15 km/h) or less● When passing through a place with a• When a certain vehicle speed has beenlow structure above the road (tunnelr
243
4-5. Using the driving support systems
detected
■ Vehicle speeds at which the system can
• When the brake pedal has been
operate
depressed
• When the accelerator pedal has been
● Detectable object crossing the road
depressed
assistance
• When the steering wheel has been oper-
Approximately 20 to 35 mph (30 to 60
ated with more than a certain amount of
km/h)
force
• When the turn signal lever is operated to
● Detectable object on the side of the road
the left/right turn position
assistance
Approximately 20 to 35 mph (30 to 60
WARNING
km/h)
■ Situations in which the system may
● Preceding vehicle deceleration assis-
not operate properly
tance
● Situations in which the lane may not be
Approximately 15 mph (20 km/h) or more
detected: P.220
● Curve deceleration assistance
● When a detectable object stops
Approximately 15 mph (20 km/h) or more
immediately before entering the path
4
of the vehicle
● Steering assist within a lane
Approximately 5 to 80 mph (10 to 140
● When passing extremely close to a
km/h)
detectable object behind a guardrail,
Driving
fence, etc.
■ System operation will be canceled when
● When changing lanes while overtak-
● In the following situations, system opera-
ing a detectable object
tion will be canceled:
• When the dynamic radar cruise control
● When passing a detectable object that
or cruise control is operating
is changing lanes or turning left/right
• When the PCS is off
• Situations in which some or all of the
● When there are objects (guardrails,
functions of the system cannot operate:
power poles, trees, walls, fences,
P.220
poles, traffic cones, mailboxes, etc.) in
• When the P, R or N shift position is
the surrounding area
selected
• The driver’s seat belt is unfastened
● When there are patterns or a painting
ahead of the vehicle that may be mis-
● In the following situations, the brake
taken for a detectable object
operation assist will be canceled:
• Approximately 9 mph (15 km/h) or less
● When passing through a place with a
• When a certain vehicle speed has been
low structure above the road (tunnel
reached, as judged by the system,
with a low ceiling, traffic sign, sign-
according to the surrounding conditions
board, etc.)
● In the following situations, system opera-
● When driving on snowy, icy, or rutted
tion may be canceled:
roads
• When the brake control or output
restriction control of a driving support
● When a detectable object is
system operates (For example: PCS,
approaching your vehicle
drive-start control)
• When the system determines that a
● When your vehicle or a detectable
detected object has moved away from
object is wandering
the vehicle
• When lane lines can no longer be
2444-5. Using the driving support systems● When the silhouette of a pedestrian orWARNINGbicyclist is unclear (such as when they● When the movement of a detectableare wearing a raincoat, long skirt, etc.)object changes (change in direction,sudden acceleration or deceleration,● When a pedestrian or bicyclist isetc.)bending forward or squatting● When suddenly approaching a detect-● When a pedestrian or bicyclist is mov-able objecting at high speed● When a preceding vehicle or motor-● When a pedestrian is pushing acycle is not directly in front of yourstroller, wheelchair, bicycle or othervehiclevehicle● When there is a structure above a● When a detectable object blends indetectable objectwith the surrounding area, such aswhen it is dim (at dawn or dusk) or● When part of a detectable object isdark (at night, in a tunnel, etc.)hidden by another object (large lug-gage, umbrella, guardrail, etc.)● When the lane width is 13.1 ft. (4 m) ormore● When multiple detectable objects areoverlapping● When the lane width is 8.2 ft. (2.5 m)or less● When a bright light, such as the sun orheadlights of another vehicle, is● When the vehicle has not been drivenreflecting off of the detectable objectfor a certain amount of time after thehybrid system was started● When the detectable object is whiteand looks extremely bright● While turning left or right or a few sec-onds after turning left or right● When the color or brightness of thedetectable object causes it to blend in● While changing lanes or a few sec-with its surroundingsonds after changing lanes● When a detectable object cuts in front● When entering a curve, driving aroundof or emerges from beside a vehiclea curve and a few seconds after drivingaround a curve● When approaching a vehicle aheadwhich is perpendicular or at an angleto the vehicle, or is facing the vehicleChanging proactive drivingassist settings● If a parked vehicle is perpendicular orat an angle to the vehicle The proactive driving assist can be● When a bicycle is a c
244
4-5. Using the driving support systems
● When the silhouette of a pedestrian or
WARNING
bicyclist is unclear (such as when they
● When the movement of a detectable
are wearing a raincoat, long skirt, etc.)
object changes (change in direction,
sudden acceleration or deceleration,
● When a pedestrian or bicyclist is
etc.)
bending forward or squatting
● When suddenly approaching a detect-
● When a pedestrian or bicyclist is mov-
able object
ing at high speed
● When a preceding vehicle or motor-
● When a pedestrian is pushing a
cycle is not directly in front of your
stroller, wheelchair, bicycle or other
vehicle
vehicle
● When there is a structure above a
● When a detectable object blends in
detectable object
with the surrounding area, such as
when it is dim (at dawn or dusk) or
● When part of a detectable object is
dark (at night, in a tunnel, etc.)
hidden by another object (large lug-
gage, umbrella, guardrail, etc.)
● When the lane width is 13.1 ft. (4 m) or
more
● When multiple detectable objects are
overlapping
● When the lane width is 8.2 ft. (2.5 m)
or less
● When a bright light, such as the sun or
headlights of another vehicle, is
● When the vehicle has not been driven
reflecting off of the detectable object
for a certain amount of time after the
hybrid system was started
● When the detectable object is white
and looks extremely bright
● While turning left or right or a few sec-
onds after turning left or right
● When the color or brightness of the
detectable object causes it to blend in
● While changing lanes or a few sec-
with its surroundings
onds after changing lanes
● When a detectable object cuts in front
● When entering a curve, driving around
of or emerges from beside a vehicle
a curve and a few seconds after driving
around a curve
● When approaching a vehicle ahead
which is perpendicular or at an angle
to the vehicle, or is facing the vehicle
Changing proactive driving
assist settings
● If a parked vehicle is perpendicular or
at an angle to the vehicle
 The proactive driving assist can be
● When a bicycle is a child sized bicycle,
enabled/disabled through a cus-
is carrying a large load, is carrying an
extra passenger, or has an unusual
tomize setting. (P.467)
shape (bicycles equipped with a child
 The following settings of the proac-
seat, tandem bicycles, etc.)
tive driving assist can be changed
● When a pedestrian or bicyclist is
through customize settings.
shorter than approximately 3.2 ft. (1 m)
or taller than approximately 6.5 ft. (2
(P.467)
m)
2454-5. Using the driving support systemsSystem operation displayDepending on the situation, the following indicators or icons will be icons cannot be displayed unless the display is changed to the driving safetysupport function information  White: Monitoring for detectable objects Green: Detectable object crossing theroad or detectable object on the side ofthe road assistance operatingA pedestrian has been detected as crossingthe road or on the side of the road and brakeor steering assistance is operating4A vehicle has been detected on the side ofthe road and brake or steering operationDrivingassistance is being performed Steering operation assistance is beingperformed to prevent the vehicle fromapproaching too close to a detectableobject on the side of the road When the steering assist is operatingPreceding vehicle deceleration assistance isbeing performedWarning to maintain appropriate vehicle-to-vehicle distanceCurve deceleration assistance is being per-formedusing the system, make sure to grip the■ Hands off steering wheel warning oper-steering wheel firmly, regardless of whetherationthe warning is operating or the following situations, a message urgingthe driver to grip the steering wheel and theicon shown in the illustration will be dis-played on the display to warn the driver. Ifthe system detects that the steering wheel isheld, the warning will be canceled. When
245
4-5. Using the driving support systems
System operation display
Depending on the situation, the following indicators or icons will be displayed.
Some icons cannot be displayed unless the display is changed to the driving safety
support function information screen.
Icon
Meaning
 White: Monitoring for detectable objects
 Green: Detectable object crossing the
road or detectable object on the side of
the road assistance operating
A pedestrian has been detected as crossing
the road or on the side of the road and brake
or steering assistance is operating
4
A vehicle has been detected on the side of
the road and brake or steering operation
Driving
assistance is being performed
 Steering operation assistance is being
performed to prevent the vehicle from
approaching too close to a detectable
object on the side of the road
 When the steering assist is operating
Preceding vehicle deceleration assistance is
being performed
Warning to maintain appropriate vehicle-to-
vehicle distance
Curve deceleration assistance is being per-
formed
using the system, make sure to grip the
■ Hands off steering wheel warning oper-
steering wheel firmly, regardless of whether
ation
the warning is operating or not.
In the following situations, a message urging
the driver to grip the steering wheel and the
icon shown in the illustration will be dis-
played on the display to warn the driver. If
the system detects that the steering wheel is
held, the warning will be canceled. When
2464-5. Using the driving support systemsRSA (Road Sign Assist) **: If equippedThe RSA system detects specificroad signs using the front cameraand/or navigation system (whenspeed limit information is available)● When assistance to a detectable objectand warns the driver via displayscrossing the road or assistance to adetectable object on the side of the roadand performed and the system determinesthe driver is not holding the steeringWARNINGwheelIf no operations are detected for a certain■ For safe useamount of time, a buzzer will sound, the● Driving safely is solely the responsibil-warning will operate. This warning may alsoity of the driver. Pay careful attentionto the surrounding conditions in orderoperate if the driver only operates steeringto ensure safe a small amount continuously.● Do not rely solely upon the RSA. The■ Warning operation after precedingRSA assists the driver by providingvehicle deceleration assistance hasroad sign information, but it is not aendedreplacement for the driver’s own visionAfter preceding vehicle deceleration assis-and awareness. Driving safely is solelytance has ended, if the driver does notthe responsibility of the driver. Payoperate the brake pedal or acceleratorcareful attention to the surroundingpedal and the vehicle approaches the pre-conditions in order to ensure safe driv-ceding vehicle, the display will flash and will sound to urge the driver todecelerate. If the system determines that■ Situations in which the RSA shouldthe driver is operating the brake pedal ornot be usedaccelerator pedal, the warning will be can-When it is necessary to disable the : P.215■ Situations in which the system maynot operate properly● Situations in which the sensors may notoperate properly: P.218Display Function When the front camera detects asign or information of a sign is avail-able from the navigation system, thesign will be displayed on the display. Multiple signs can be
246
4-5. Using the driving support systems
RSA (Road Sign Assist) *
*
: If equipped
The RSA system detects specific
road signs using the front camera
and/or navigation system (when
speed limit information is available)
● When assistance to a detectable object
and warns the driver via displays
crossing the road or assistance to a
detectable object on the side of the road
and buzzers.
is performed and the system determines
the driver is not holding the steering
WARNING
wheel
If no operations are detected for a certain
■ For safe use
amount of time, a buzzer will sound, the
● Driving safely is solely the responsibil-
warning will operate. This warning may also
ity of the driver. Pay careful attention
to the surrounding conditions in order
operate if the driver only operates steering
to ensure safe driving.
wheel a small amount continuously.
● Do not rely solely upon the RSA. The
■ Warning operation after preceding
RSA assists the driver by providing
vehicle deceleration assistance has
road sign information, but it is not a
ended
replacement for the driver’s own vision
After preceding vehicle deceleration assis-
and awareness. Driving safely is solely
tance has ended, if the driver does not
the responsibility of the driver. Pay
operate the brake pedal or accelerator
careful attention to the surrounding
pedal and the vehicle approaches the pre-
conditions in order to ensure safe driv-
ceding vehicle, the display will flash and a
ing.
buzzer will sound to urge the driver to
decelerate. If the system determines that
■ Situations in which the RSA should
the driver is operating the brake pedal or
not be used
accelerator pedal, the warning will be can-
When it is necessary to disable the sys-
celed.
tem: P.215
■ Situations in which the system may
not operate properly
● Situations in which the sensors may not
operate properly: P.218
Display Function
 When the front camera detects a
sign or information of a sign is avail-
able from the navigation system, the
sign will be displayed on the display.
 Multiple signs can be displayed.
Depending on the specifications of the
2474-5. Using the driving support systemsvehicle, the number of displayed signs may(end point, day of week, time of day, etc.)be limited.● When there is a sign within a trafficrestricted area, such as a roadworks area■ Operating conditions of sign display● When the navigation system map data isout of dateSigns will be displayed when the followingconditions are met:● When the navigation system cannot beused● The system has detected a signIn this case, the speed limit signs displayedIn the following situations, a displayed signon the multi-information display and navi-may stop being displayed:gation system display may differ.● When a new sign has not been detectedfor a certain distance● When the system determines that theNotification functionroad being driven on has changed, suchas after a left or right turnIn the following situations, the RSA sys-■ Situations in which the display functiontem will output a warning to notify themay not operate the following situations, the RSA system If the vehicle speed exceeds the4may not operate properly and may notdetect signs or may display the incorrectspeed warning threshold of thesign. However, this does not indicate a mal-speed limit sign displayed on , the sign display will be● When a sign is dirty, faded, tilted or bentemphasized and a buzzer will● When the contrast of an electronic sign ● When all or part of a sign is hidden by a When the RSA system detects a dotree, utility pole, enter sign and determines that● When a sign is detected by the frontthe vehicle has entered a no-entrycamera for a short amount of timearea, the do not enter sign displayed● When the driving state (turning, chang-on the display will flash and a buzzering lanes, etc.) is judged incorrectlywill sound.● When a sign is immediately after a free-way junction or in an adjacent lane justbefore merging■ Operating conditions of the notification● When stickers are attached to the rear offunctio
247
4-5. Using the driving support systems
vehicle, the number of displayed signs may
(end point, day of week, time of day, etc.)
be limited.
● When there is a sign within a traffic
restricted area, such as a roadworks area
■ Operating conditions of sign display
● When the navigation system map data is
out of date
Signs will be displayed when the following
conditions are met:
● When the navigation system cannot be
used
● The system has detected a sign
In this case, the speed limit signs displayed
In the following situations, a displayed sign
on the multi-information display and navi-
may stop being displayed:
gation system display may differ.
● When a new sign has not been detected
for a certain distance
● When the system determines that the
Notification function
road being driven on has changed, such
as after a left or right turn
In the following situations, the RSA sys-
■ Situations in which the display function
tem will output a warning to notify the
may not operate properly
driver.
In the following situations, the RSA system
 If the vehicle speed exceeds the
4
may not operate properly and may not
detect signs or may display the incorrect
speed warning threshold of the
sign. However, this does not indicate a mal-
speed limit sign displayed on the
Driving
function.
display, the sign display will be
● When a sign is dirty, faded, tilted or bent
emphasized and a buzzer will
● When the contrast of an electronic sign is
sound.
low
● When all or part of a sign is hidden by a
 When the RSA system detects a do
tree, utility pole, etc.
not enter sign and determines that
● When a sign is detected by the front
the vehicle has entered a no-entry
camera for a short amount of time
area, the do not enter sign displayed
● When the driving state (turning, chang-
on the display will flash and a buzzer
ing lanes, etc.) is judged incorrectly
will sound.
● When a sign is immediately after a free-
way junction or in an adjacent lane just
before merging
■ Operating conditions of the notification
● When stickers are attached to the rear of
functions
a preceding vehicle
● Excess speed notification function
● When a sign similar to a system compati-
This function will operate when the follow-
ble sign is detected as a system compati-
ing condition is met:
ble sign
• A speed limit road sign is recognized by
● When a speed limit sign for a frontage
the system.
road is within detection range of the front
● No entry notification function
camera
This function will operate when all of the fol-
● When driving around a roundabout
lowing conditions are met:
● When a sign intended for trucks, etc. is
• More than one no entry road signs are
detected
recognized by the system simultaneously.
● When a sign has a supplemental sign
• The vehicle is passing between no entry
2484-5. Using the driving support systemsroad signs recognized by the . (P.467)Types of road signs supported The following types of road signscan be , non-standard or recently intro-duced traffic signs may not be limitDo Not EnterNo U-turnNo Turn On RedStopYieldWarning Depending on the specifications ofthe vehicle, signs may be RSA settings The following settings of the RSAcan be changed through customize
248
4-5. Using the driving support systems
road signs recognized by the system.
settings. (P.467)
Types of road signs supported
 The following types of road signs
can be displayed.
However, non-standard or recently intro-
duced traffic signs may not be displayed.
Speed limit
Do Not Enter
No U-turn
No Turn On Red
Stop
Yield
Warning
 Depending on the specifications of
the vehicle, signs may be displayed
overlapping.
Changing RSA settings
 The following settings of the RSA
can be changed through customize
2494-5. Using the driving support systemsDynamic radar cruise con-● Even if the system is operating cor-rectly, the condition of a precedingtrolvehicle as recognized by the driverand detected by the system may , it is necessary for the driverThis dynamic radar cruise controlto pay attention, assess risks, anddetects the presence of vehiclesensure safety. Over-reliance on thissystem to drive the vehicle safely mayahead, determines the currentlead to an accident resulting in deathvehicle-to-vehicle distance, andor serious to maintain a suitable dis-■ Precautions for the driving assist sys-tance from the vehicle ahead. Thetemsdesired vehicle-to-vehicle dis-Observe the following precautions, astance can be set by operating thethere are limitations to the assistancevehicle-to-vehicle distance by the system. Over-relianceon this system may lead to an accidentUse the dynamic radar cruise con-resulting in death or serious only on highways and express-● Details of support provided for ’s vision4The dynamic radar cruise control is onlyWARNINGintended to help the driver in determin-Drivinging the distance between the driver’s■ For safe useown vehicle and a designated preceding● Driving safely is solely the responsibil-vehicle. It is not a system which allows fority of the driver. Do not overly rely oncareless or inattentive driving, and is notthis system, and pay careful attentiona system which assists in poor visibilityto the surrounding conditions in ensure safe driver must pay attention to their● The dynamic radar cruise control pro-surroundings, even when the vehiclevides driving assistance to reduce ’s burden. However, there arelimitations to the assistance provided.● Details of support provided for thedriver’s judgementRead the following items carefully. Donot overly rely on this system and alwaysThe dynamic radar cruise control deter-drive
249
4-5. Using the driving support systems
Dynamic radar cruise con-
● Even if the system is operating cor-
rectly, the condition of a preceding
trol
vehicle as recognized by the driver
and detected by the system may differ.
Therefore, it is necessary for the driver
This dynamic radar cruise control
to pay attention, assess risks, and
detects the presence of vehicles
ensure safety. Over-reliance on this
system to drive the vehicle safely may
ahead, determines the current
lead to an accident resulting in death
vehicle-to-vehicle distance, and
or serious injury.
operates to maintain a suitable dis-
■ Precautions for the driving assist sys-
tance from the vehicle ahead. The
tems
desired vehicle-to-vehicle dis-
Observe the following precautions, as
tance can be set by operating the
there are limitations to the assistance
vehicle-to-vehicle distance switch.
provided by the system. Over-reliance
on this system may lead to an accident
Use the dynamic radar cruise con-
resulting in death or serious injury.
trol only on highways and express-
● Details of support provided for the
ways.
driver’s vision
4
The dynamic radar cruise control is only
WARNING
intended to help the driver in determin-
Driving
ing the distance between the driver’s
■ For safe use
own vehicle and a designated preceding
● Driving safely is solely the responsibil-
vehicle. It is not a system which allows for
ity of the driver. Do not overly rely on
careless or inattentive driving, and is not
this system, and pay careful attention
a system which assists in poor visibility
to the surrounding conditions in order
conditions.
to ensure safe driving.
The driver must pay attention to their
● The dynamic radar cruise control pro-
surroundings, even when the vehicle
vides driving assistance to reduce the
stops.
driver’s burden. However, there are
limitations to the assistance provided.
● Details of support provided for the
driver’s judgement
Read the following items carefully. Do
not overly rely on this system and always
The dynamic radar cruise control deter-
drive carefully.
mines whether the distance between the
driver’s own vehicle and a designated
Conditions under which the system may
preceding vehicle is within a set range. It
not operate correctly: P.255
is not capable of making any other type
of judgement. Therefore, it is absolutely
● Set the speed appropriately according
necessary for the driver to remain vigi-
to the speed limit, traffic flow, road
lant and to determine whether or not
conditions, weather conditions, etc.
there is a possibility of danger.
The driver is responsible for confirm-
ing the set speed.
● Details of support provided for the
driver’s operation
2504-5. Using the driving support systemsWARNINGThe dynamic radar cruise control doesnot include functions which will preventor avoid collisions with vehicles ahead ofyour vehicle. Therefore, if there is everany possibility of danger, the driver musttake immediate and direct control of thevehicle and act appropriately in order toensure safety.■ Situations in which the dynamic radarcruise control should not be usedDo not use the dynamic radar cruisecontrol in the following situations. As thesystem will not be able to provide appro-priate control, using it may lead to anaccident resulting in death or seriousinjury.● Roads where there are pedestrians,cyclists, etc.● When driving on a highway orexpressway entrance or exit● When the approach warning soundsfrequently● Situations in which the sensors may notoperate properly: P.218● When it is necessary to disable the sys-tem: P.215
250
4-5. Using the driving support systems
WARNING
The dynamic radar cruise control does
not include functions which will prevent
or avoid collisions with vehicles ahead of
your vehicle. Therefore, if there is ever
any possibility of danger, the driver must
take immediate and direct control of the
vehicle and act appropriately in order to
ensure safety.
■ Situations in which the dynamic radar
cruise control should not be used
Do not use the dynamic radar cruise
control in the following situations. As the
system will not be able to provide appro-
priate control, using it may lead to an
accident resulting in death or serious
injury.
● Roads where there are pedestrians,
cyclists, etc.
● When driving on a highway or
expressway entrance or exit
● When the approach warning sounds
frequently
● Situations in which the sensors may not
operate properly: P.218
● When it is necessary to disable the sys-
tem: P.215
2514-5. Using the driving support systemsBasic functions4DrivingA Constant speed cruising:When there are no vehicles aheadThe vehicle drives at the speed set by the the set vehicle speed is exceeded while driving down a hill, the set vehicle speed displaywill blink and a buzzer will sound.B Deceleration and follow-up cruisingWhen a preceding vehicle driving slower than the set vehicle speed is detectedWhen a vehicle is detected driving ahead of your vehicle, the vehicle automatically decel-erates and if a greater reduction in vehicle speed is necessary, the brakes are applied (thestop lights will come on at this time). The vehicle is controlled to maintain the vehicle-to-vehicle distance set by the driver, in accordance with changes in the speed of the preced-ing vehicle. If vehicle deceleration is not sufficient and the vehicle approaches the vehicleahead, the approach warning will sound.C AccelerationWhen there are no longer any preceding vehicles driving slower than the setvehicle speedThe vehicle accelerates until the set vehicle speed is reached and then resumes constantspeed cruising.D Starting off:If a preceding vehicle stops, the vehicle will also stop (controlled stop). After the
251
4-5. Using the driving support systems
Basic functions
4
Driving
A Constant speed cruising:
When there are no vehicles ahead
The vehicle drives at the speed set by the driver.
If the set vehicle speed is exceeded while driving down a hill, the set vehicle speed display
will blink and a buzzer will sound.
B Deceleration and follow-up cruising
When a preceding vehicle driving slower than the set vehicle speed is detected
When a vehicle is detected driving ahead of your vehicle, the vehicle automatically decel-
erates and if a greater reduction in vehicle speed is necessary, the brakes are applied (the
stop lights will come on at this time). The vehicle is controlled to maintain the vehicle-to-
vehicle distance set by the driver, in accordance with changes in the speed of the preced-
ing vehicle. If vehicle deceleration is not sufficient and the vehicle approaches the vehicle
ahead, the approach warning will sound.
C Acceleration
When there are no longer any preceding vehicles driving slower than the set
vehicle speed
The vehicle accelerates until the set vehicle speed is reached and then resumes constant
speed cruising.
D Starting off:
If a preceding vehicle stops, the vehicle will also stop (controlled stop). After the
2524-5. Using the driving support systemspreceding vehicle starts off, pressing the “RES” switch or depressing the accelera-tor pedal will resume follow-up cruising (start off operation). If a start off operationis not performed, the controlled stop will componentsUsing the dynamic radar cruisecontrol■ Meter display■ Setting the vehicle speed1 Press the driving assist mode selectswitch to select Adaptive dynamic radar cruise control indicatorwill illuminate.A Multi-information displayB Set vehicle speedC Indicators■ Switches2 Using the accelerator pedal, accel-erate or decelerate to the desiredvehicle speed (approximately 20mph [30 km/h] or more), and pressthe driving assist switch to set theset vehicle set vehicle speed will be displayed onthe multi-information vehicle speed at the moment theA Driving assist mode select switchswitch is released will be the set vehicleB Driving assist switchC “+” switch/“RES” switchD “-” switchE Cancel switchF Vehicle-to-vehicle distance switch
252
4-5. Using the driving support systems
preceding vehicle starts off, pressing the “RES” switch or depressing the accelera-
tor pedal will resume follow-up cruising (start off operation). If a start off operation
is not performed, the controlled stop will continue.
System components
Using the dynamic radar cruise
control
■ Meter display
■ Setting the vehicle speed
1 Press the driving assist mode select
switch to select Adaptive Cruise
Mode.
The dynamic radar cruise control indicator
will illuminate.
A Multi-information display
B Set vehicle speed
C Indicators
■ Switches
2 Using the accelerator pedal, accel-
erate or decelerate to the desired
vehicle speed (approximately 20
mph [30 km/h] or more), and press
the driving assist switch to set the
set vehicle speed.
The set vehicle speed will be displayed on
the multi-information display.
The vehicle speed at the moment the
A Driving assist mode select switch
switch is released will be the set vehicle
B Driving assist switch
C “+” switch/“RES” switch
D “-” switch
E Cancel switch
F Vehicle-to-vehicle distance switch
2534-5. Using the driving support in 1 mph (1.6 km/h) incre-ments continuously while the switch ispressed and held Except for the U.S.A., Hawaii,Guam and Puerto RicoShort press adjustment: By 1 km/h (0.6mph) or 1 mph (1.6 km/h) each time theswitch is pressedLong press adjustment: Increases or■ Adjusting the set vehicle speeddecreases in 5 km/h (3.1 mph) or 5 Adjusting the set vehicle speedmph (8 km/h) increments continuouslyusing the switcheswhile the switch is pressed and held Increasing the set vehicle speedTo change the set vehicle speed, pressthe “+” switch or “-” switch until theusing the accelerator pedaldesired speed is displayed.41 Depress the accelerator pedal toaccelerate the vehicle to theDrivingdesired vehicle speed.2 Press the “+” switch.■ Canceling/resuming control1 Press the cancel switch or drivingassist switch to cancel will also be canceled if the brakepedal is depressed.(If the vehicle has been stopped by system1 Increase set vehicle speedcontrol, depressing the brake pedal will not2 Decrease set vehicle speedcancel control.)Short press adjustment: Press the switchLong press adjustment: Press and hold theswitch until the desired set vehicle speed set vehicle speed will increase ordecrease as follows: For the U.S.A., Hawaii, Guam andPuerto Rico2 Press the “RES” switch to resumeShort press adjustment: Increases by 1 mph (1.6 km/h) eachtime the switch is pressedLong press adjustment: Increases or
253
4-5. Using the driving support systems
speed.
decreases in 1 mph (1.6 km/h) incre-
ments continuously while the switch is
pressed and held
 Except for the U.S.A., Hawaii,
Guam and Puerto Rico
Short press adjustment: By 1 km/h (0.6
mph) or 1 mph (1.6 km/h) each time the
switch is pressed
Long press adjustment: Increases or
■ Adjusting the set vehicle speed
decreases in 5 km/h (3.1 mph) or 5
 Adjusting the set vehicle speed
mph (8 km/h) increments continuously
using the switches
while the switch is pressed and held
 Increasing the set vehicle speed
To change the set vehicle speed, press
the “+” switch or “-” switch until the
using the accelerator pedal
desired speed is displayed.
4
1 Depress the accelerator pedal to
accelerate the vehicle to the
Driving
desired vehicle speed.
2 Press the “+” switch.
■ Canceling/resuming control
1 Press the cancel switch or driving
assist switch to cancel control.
Control will also be canceled if the brake
pedal is depressed.
(If the vehicle has been stopped by system
1 Increase set vehicle speed
control, depressing the brake pedal will not
2 Decrease set vehicle speed
cancel control.)
Short press adjustment: Press the switch
Long press adjustment: Press and hold the
switch until the desired set vehicle speed is
reached.
The set vehicle speed will increase or
decrease as follows:
 For the U.S.A., Hawaii, Guam and
Puerto Rico
2 Press the “RES” switch to resume
Short press adjustment: Increases or
control.
decreases by 1 mph (1.6 km/h) each
time the switch is pressed
Long press adjustment: Increases or
2544-5. Using the driving support systems■ Changing the vehicle-to-vehicle■ Operating conditionsdistance● The D shift position is time the switch is pressed, the● The desired set speed can be set whenvehicle-to-vehicle distance setting willthe vehicle speed is approximately 20mph (30 km/h) or as follows:• If the vehicle speed is set while driving atIf a preceding vehicle is detected, thebelow approximately 20 mph (30 km/h),the set vehicle speed will be approxi-preceding vehicle mark A will be dis-mately 20 mph (30 km/h).played.• If the vehicle speed is set while driving ata speed that exceeds the system’s upperlimit, the set vehicle speed will be the sys-tem’s upper limit.■ Accelerating after setting the vehiclespeedAs with normal driving, acceleration can beperformed by depressing the acceleratorpedal. After accelerating, the vehicle willreturn to the set vehicle speed. However,while in vehicle-to-vehicle distance controlmode, the vehicle speed may decrease tobelow the set vehicle speed in order toApproximate Dis-maintain the distance from the precedingIllustra- Vehicle-tance (-vehicleSpeed: 60 mph■ When the vehicle is stopped by systemNumber distance[100 km/h])control during follow-up cruising● When the “RES” switch is pressed whileApproximately1Extra longthe vehicle is stopped by system control,200 ft. (60 m)if the preceding vehicle starts off withinapproximately 3 seconds, follow-upApproximately 1452Longcruising will . (45 m)● If the preceding vehicle starts off withinApproximately 100approximately 3 seconds of the vehicle3Mediumft. (30 m)being stopped by system control, follow-up cruising will 854Short■ Automatic cancellation of vehicle-to-ft. (25 m)vehicle distance control modeIn the following situations, vehicle-to-vehi-The actual vehicle-to-vehicle distancecle distance control mode will be canceledvaries in accordance with the vehicleautomatically:speed. Also, when the vehicle is● W
254
4-5. Using the driving support systems
■ Changing the vehicle-to-vehicle
■ Operating conditions
distance
● The D shift position is selected.
Each time the switch is pressed, the
● The desired set speed can be set when
vehicle-to-vehicle distance setting will
the vehicle speed is approximately 20
mph (30 km/h) or more.
change as follows:
• If the vehicle speed is set while driving at
If a preceding vehicle is detected, the
below approximately 20 mph (30 km/h),
the set vehicle speed will be approxi-
preceding vehicle mark A will be dis-
mately 20 mph (30 km/h).
played.
• If the vehicle speed is set while driving at
a speed that exceeds the system’s upper
limit, the set vehicle speed will be the sys-
tem’s upper limit.
■ Accelerating after setting the vehicle
speed
As with normal driving, acceleration can be
performed by depressing the accelerator
pedal. After accelerating, the vehicle will
return to the set vehicle speed. However,
while in vehicle-to-vehicle distance control
mode, the vehicle speed may decrease to
below the set vehicle speed in order to
Approximate Dis-
maintain the distance from the preceding
Illustra- Vehicle-
tance (Vehicle
vehicle.
tion
to-vehicle
Speed: 60 mph
■ When the vehicle is stopped by system
Number distance
[100 km/h])
control during follow-up cruising
● When the “RES” switch is pressed while
Approximately
1
Extra long
the vehicle is stopped by system control,
200 ft. (60 m)
if the preceding vehicle starts off within
approximately 3 seconds, follow-up
Approximately 145
2
Long
cruising will resume.
ft. (45 m)
● If the preceding vehicle starts off within
Approximately 100
approximately 3 seconds of the vehicle
3
Medium
ft. (30 m)
being stopped by system control, follow-
up cruising will resume.
Approximately 85
4
Short
■ Automatic cancellation of vehicle-to-
ft. (25 m)
vehicle distance control mode
In the following situations, vehicle-to-vehi-
The actual vehicle-to-vehicle distance
cle distance control mode will be canceled
varies in accordance with the vehicle
automatically:
speed. Also, when the vehicle is
● When the brake control or output
stopped by system control, it will be
restriction control of a driving support
system operates
stopped at a certain distance from the
(For example: Pre-Collision System,
preceding vehicle, depending on the
drive-start control)
situation, regardless of the setting.
● When the parking brake has been oper-
ated
● When the driver’s seat belt is unfastened
2554-5. Using the driving support systemswhile drivingdetect a vehicle, the system may not oper-ate properly.● When the Pre-Collision System is dis-abled● When a preceding vehicle brakes sud-denly● When the vehicle is stopped by systemcontrol on a steep incline● When changing lanes at low speeds,such as in a traffic jam● When any of the following are detectedwhile the vehicle is stopped by systemcontrol:Approach warning• The driver’s seat belt is unfastened• The driver’s door is openedIn situations where the vehicle• Approximately 3 minutes have elapsedapproaches a preceding vehicle andsince the vehicle was stoppedthe system cannot provide sufficientThe parking brake may be actived , such as if a vehicle cuts in● Situations in which some or all of thefront of the vehicle, a warning displayfunctions of the system cannot operate:will flash and a buzzer will sound toP.220alert the driver. Depress the brake■ Dynamic radar cruise control systempedal to ensure appropriate vehicle-4warning messages and buzzersto-vehicle safe use: P.215■ Warnings may not occur whenDriving■ Preceding vehicles that the sensor maynot detect correctlyIn the following situations, the warningIn the following situations, depending on themay not operate even though the vehi-conditions, if the system cannot provide suf-cle-to-vehicle distance is deceleration or acceleration is nec-essary, operate the brake pedal or When the preceding vehicle is trav-accelerator at the same speed or fasterAs the sensor may not be able to correctlythan your vehicledetect these types of vehicles, the approachwarning (P.255) may not operate. When the preceding vehicle is trav-● When a vehicle cuts in front of your vehi-eling at an extremely low speedcle or changes lanes away from yourvehicle extremely slowly or quickly Immediately after the vehicle speed● When changing laneshas been set● When a preceding vehicle is driving at a When the accelerator
255
4-5. Using the driving support systems
while driving
detect a vehicle, the system may not oper-
ate properly.
● When the Pre-Collision System is dis-
abled
● When a preceding vehicle brakes sud-
denly
● When the vehicle is stopped by system
control on a steep incline
● When changing lanes at low speeds,
such as in a traffic jam
● When any of the following are detected
while the vehicle is stopped by system
control:
Approach warning
• The driver’s seat belt is unfastened
• The driver’s door is opened
In situations where the vehicle
• Approximately 3 minutes have elapsed
approaches a preceding vehicle and
since the vehicle was stopped
the system cannot provide sufficient
The parking brake may be actived automat-
ically.
deceleration, such as if a vehicle cuts in
● Situations in which some or all of the
front of the vehicle, a warning display
functions of the system cannot operate:
will flash and a buzzer will sound to
P.220
alert the driver. Depress the brake
■ Dynamic radar cruise control system
pedal to ensure appropriate vehicle-
4
warning messages and buzzers
to-vehicle distance.
For safe use: P.215
■ Warnings may not occur when
Driving
■ Preceding vehicles that the sensor may
not detect correctly
In the following situations, the warning
In the following situations, depending on the
may not operate even though the vehi-
conditions, if the system cannot provide suf-
cle-to-vehicle distance is short.
ficient deceleration or acceleration is nec-
essary, operate the brake pedal or
 When the preceding vehicle is trav-
accelerator pedal.
eling at the same speed or faster
As the sensor may not be able to correctly
than your vehicle
detect these types of vehicles, the approach
warning (P.255) may not operate.
 When the preceding vehicle is trav-
● When a vehicle cuts in front of your vehi-
eling at an extremely low speed
cle or changes lanes away from your
vehicle extremely slowly or quickly
 Immediately after the vehicle speed
● When changing lanes
has been set
● When a preceding vehicle is driving at a
 When the accelerator pedal is
low speed
depressed
● When a vehicle is stopped in the same
lane as the vehicle
● When a motorcycle is traveling in the
Curve speed reduction function
same lane as the vehicle
■ Conditions under which the system may
When a curve is detected, the vehicle
not operate correctly
speed will begin being reduced. When
In the following situations, operate the
the curve ends, the vehicle speed
brake pedal (or accelerator pedal, depend-
reduction will end.
ing on the situation) as necessary.
As the sensor may not be able to correctly
Depending on the situation, the vehicle
2564-5. Using the driving support systemsspeed will then return to the set vehiclechanged, the vehicle will accelerate the set speed to assist in situations where vehicle-to-vehicle dis-The system’s recognition of which lane istance control needs to operate, such asthe passing lane may be based solely onwhen a preceding vehicle cuts in front ofthe location of the steering wheel in theyour vehicle, the curve speed reductionvehicle (left-hand drive/right-hand drive).function will be the vehicle is driven in a location wherethe passing lane is on the opposite side ofthat where the vehicle was originally sold,the vehicle may accelerate when the turnsignal lever is operated away from thepassing lane. (e.g. The vehicle was manu-factured to be driven on roads for right-hand drive vehicles [that overtake on theright], but is being used on roads for left-hand drive vehicles [that overtake on theleft]. In this case, the vehicle may acceler-ate when the turn signal lever is operated■ Situations in which the curve speedto the right.)reduction function may not operateIn situations such as the following, the curveIf your vehicle is being driven at approxi-speed reduction function may not operate:mately 50 mph (80 km/h) or more and● When the vehicle is being driven aroundthe lane is changed to that with a vehiclea gentle curvetraveling slower than your vehicle, when● When the accelerator pedal is beingthe turn signal lever is operated the vehicledepressedwill gradually decelerate to assist in chang-● When the vehicle is being driven arounding extremely short curveChanging Dynamic radar cruiseSupport for lane changecontrol settingsIf your vehicle is being driven atThe settings of Dynamic radar cruiseapproximately 50 mph (80 km/h) orcontrol can be changed through cus-more and a lane change to the passingtomize settings. (P.466)lane is performed, when the turn signallever is operated and the lane isDisplay and system operation stateThe o
256
4-5. Using the driving support systems
speed will then return to the set vehicle
changed, the vehicle will accelerate up
speed.
to the set speed to assist in overtaking.
In situations where vehicle-to-vehicle dis-
The system’s recognition of which lane is
tance control needs to operate, such as
the passing lane may be based solely on
when a preceding vehicle cuts in front of
the location of the steering wheel in the
your vehicle, the curve speed reduction
vehicle (left-hand drive/right-hand drive).
function will be canceled.
If the vehicle is driven in a location where
the passing lane is on the opposite side of
that where the vehicle was originally sold,
the vehicle may accelerate when the turn
signal lever is operated away from the
passing lane. (e.g. The vehicle was manu-
factured to be driven on roads for right-
hand drive vehicles [that overtake on the
right], but is being used on roads for left-
hand drive vehicles [that overtake on the
left]. In this case, the vehicle may acceler-
ate when the turn signal lever is operated
■ Situations in which the curve speed
to the right.)
reduction function may not operate
In situations such as the following, the curve
If your vehicle is being driven at approxi-
speed reduction function may not operate:
mately 50 mph (80 km/h) or more and
● When the vehicle is being driven around
the lane is changed to that with a vehicle
a gentle curve
traveling slower than your vehicle, when
● When the accelerator pedal is being
the turn signal lever is operated the vehicle
depressed
will gradually decelerate to assist in chang-
● When the vehicle is being driven around
ing lanes.
an extremely short curve
Changing Dynamic radar cruise
Support for lane change
control settings
If your vehicle is being driven at
The settings of Dynamic radar cruise
approximately 50 mph (80 km/h) or
control can be changed through cus-
more and a lane change to the passing
tomize settings. (P.466)
lane is performed, when the turn signal
lever is operated and the lane is
Display and system operation state
The operating state of Dynamic radar cruise control is indicated.
2574-5. Using the driving support systemsIndicatorMulti-information displaySituationVehicle-to-vehicleDynamic radar cruisedistance setting: Gray control being OFFWhiteVehicle-to-vehicledistance setting: Blue Constant speed cruis-ingSet vehicle speed:GreenGreenVehicle-to-vehicledistance setting: BlueSet vehicle speed:4Follow-up cruisingGreenGreenPreceding vehicle:DrivingWhiteVehicle-to-vehicledistance setting:Orange flashingSet vehicle speed:Approach warningGreenGreenPreceding vehicle:Orange flashingVehicle-to-vehicledistance setting: GraySet vehicle speed:Accelerating with theWhiteaccelerator pedalGreenPreceding vehicle:Gray
257
4-5. Using the driving support systems
Indicator
Multi-information display
Situation
Vehicle-to-vehicle
Dynamic radar cruise
distance setting: Gray control being OFF
White
Vehicle-to-vehicle
distance setting: Blue Constant speed cruis-
ing
Set vehicle speed:
Green
Green
Vehicle-to-vehicle
distance setting: Blue
Set vehicle speed:
4
Follow-up cruising
Green
Green
Preceding vehicle:
Driving
White
Vehicle-to-vehicle
distance setting:
Orange flashing
Set vehicle speed:
Approach warning
Green
Green
Preceding vehicle:
Orange flashing
Vehicle-to-vehicle
distance setting: Gray
Set vehicle speed:
Accelerating with the
White
accelerator pedal
Green
Preceding vehicle:
Gray
2584-5. Using the driving support systemsIndicatorMulti-information displaySituationSet vehicle speed:Set vehicle speedGreen in reverse dis-being exceededplayGreenVehicle-to-vehicledistance setting: GraySet vehicle speed:Vehicle in controlledWhitestopGreenPreceding vehicle:Gray
258
4-5. Using the driving support systems
Indicator
Multi-information display
Situation
Set vehicle speed:
Set vehicle speed
Green in reverse dis-
being exceeded
play
Green
Vehicle-to-vehicle
distance setting: Gray
Set vehicle speed:
Vehicle in controlled
White
stop
Green
Preceding vehicle:
Gray
2594-5. Using the driving support systemsCruise controlSystem components■ Meter displayThe vehicle can be driven at a setspeed even if the accelerator pedalis not the cruise control only on high-ways and ■ For safe use● Driving safely is solely the responsibil-ity of the driver. Therefore, do notA Set vehicle speedoverly rely on this system. The driver issolely responsible for paying attentionB Cruise control indicatorto the vehicle’s surroundings and driv-ing safely.■ Switches4● Set the speed appropriately accordingto the speed limit, traffic flow, roadconditions, weather conditions, driver is responsible for confirm-ing the set speed.■ Situations in which cruise controlshould not be usedDo not use the cruise control in the fol-lowing situations. As the system will notbe able to provide appropriate control,using it may lead to an accident resultingin death or serious injury.A Driving assist mode select switch● On roads with sharp bendsB Driving assist switch● On winding roadsC “+” switch / “RES” switch● On slippery roads, such as those cov-D “-” switchered with rain, ice or snowE Cancel switch● On steep downhills, or where thereare sudden changes between sharp upand down gradientsUsing the cruise controlVehicle speed may exceed the set speed■ Setting the vehicle speedwhen driving down a steep hill.1 Press the driving assist mode select● When it is necessary to disable the sys-tem: P.215switch to select Cruise ControlMode.
259
4-5. Using the driving support systems
Cruise control
System components
■ Meter display
The vehicle can be driven at a set
speed even if the accelerator pedal
is not depressed.
Use the cruise control only on high-
ways and expressways.
WARNING
■ For safe use
● Driving safely is solely the responsibil-
ity of the driver. Therefore, do not
A Set vehicle speed
overly rely on this system. The driver is
solely responsible for paying attention
B Cruise control indicator
to the vehicle’s surroundings and driv-
ing safely.
■ Switches
4
● Set the speed appropriately according
to the speed limit, traffic flow, road
conditions, weather conditions, etc.
Driving
The driver is responsible for confirm-
ing the set speed.
■ Situations in which cruise control
should not be used
Do not use the cruise control in the fol-
lowing situations. As the system will not
be able to provide appropriate control,
using it may lead to an accident resulting
in death or serious injury.
A Driving assist mode select switch
● On roads with sharp bends
B Driving assist switch
● On winding roads
C “+” switch / “RES” switch
● On slippery roads, such as those cov-
D “-” switch
ered with rain, ice or snow
E Cancel switch
● On steep downhills, or where there
are sudden changes between sharp up
and down gradients
Using the cruise control
Vehicle speed may exceed the set speed
■ Setting the vehicle speed
when driving down a steep hill.
1 Press the driving assist mode select
● When it is necessary to disable the sys-
tem: P.215
switch to select Cruise Control
Mode.
2604-5. Using the driving support systemsThe cruise control indicator will illuminate.1 Increase set vehicle speed2 Using the accelerator pedal, accel-2 Decrease set vehicle speederate to the desired vehicle speedThe set vehicle speed will increase or(approximately 20 mph [30 km/h]decrease as follows:or more), and press the drivingFine adjustment: By 1 mph (1.6 km/h) or 1assist switch to set the set vehiclekm/h (0.6 mph) each time the switch adjustment: Increases continuouslyThe vehicle speed at the moment thewhile the switch is pressed and heldswitch is released will be the set vehiclespeed. Increasing the set vehicle speedusing the accelerator pedal1 Depress the accelerator pedal toaccelerate the vehicle to thedesired vehicle speed.2 Press the “+” switch.■ Canceling/resuming control1 Press the cancel switch or drivingassist switch to cancel control.■ Adjusting the set vehicle speedControl will also be canceled if the brake Adjusting the set vehicle speedpedal is the switchesTo change the set vehicle speed, press the“+” or “-” switch until the desired speed isdisplayed.2 Press the “RES” switch to resumecontrol.
260
4-5. Using the driving support systems
The cruise control indicator will illuminate.
1 Increase set vehicle speed
2 Using the accelerator pedal, accel-
2 Decrease set vehicle speed
erate to the desired vehicle speed
The set vehicle speed will increase or
(approximately 20 mph [30 km/h]
decrease as follows:
or more), and press the driving
Fine adjustment: By 1 mph (1.6 km/h) or 1
assist switch to set the set vehicle
km/h (0.6 mph) each time the switch is
speed.
pressed
Large adjustment: Increases continuously
The vehicle speed at the moment the
while the switch is pressed and held
switch is released will be the set vehicle
speed.
 Increasing the set vehicle speed
using the accelerator pedal
1 Depress the accelerator pedal to
accelerate the vehicle to the
desired vehicle speed.
2 Press the “+” switch.
■ Canceling/resuming control
1 Press the cancel switch or driving
assist switch to cancel control.
■ Adjusting the set vehicle speed
Control will also be canceled if the brake
 Adjusting the set vehicle speed
pedal is depressed.
using the switches
To change the set vehicle speed, press the
“+” or “-” switch until the desired speed is
displayed.
2 Press the “RES” switch to resume
control.
2614-5. Using the driving support systems● When the brake control or output■ Automatic cancellation of the cruiserestriction control of a driving supportcontrolsystem operates (For example: PCS,drive-start control)In the following situations, the cruise controlwill be canceled automatically:● When the parking brake has been oper-ated● When the vehicle speed drops approxi-mately 10 mph (16 km/h) or more below● When the driver’s seat belt is unfastenedthe set vehicle speed● Situations in which some or all of the● When the vehicle speed drops belowfunctions of the system cannot operate:P.220approximately 20 mph (30 km/h)Display and system operation stateThe operating state of cruise control is -information displaySituation4Cruise control beingBlankOFFDrivingWhiteSet vehicle speed:Constant speed cruis-GreeningGreenSet vehicle speed:Set vehicle speedGreen in reverse dis-being exceededplayGreen
261
4-5. Using the driving support systems
● When the brake control or output
■ Automatic cancellation of the cruise
restriction control of a driving support
control
system operates (For example: PCS,
drive-start control)
In the following situations, the cruise control
will be canceled automatically:
● When the parking brake has been oper-
ated
● When the vehicle speed drops approxi-
mately 10 mph (16 km/h) or more below
● When the driver’s seat belt is unfastened
the set vehicle speed
● Situations in which some or all of the
● When the vehicle speed drops below
functions of the system cannot operate:
P.220
approximately 20 mph (30 km/h)
Display and system operation state
The operating state of cruise control is indicated.
Indicator
Multi-information display
Situation
4
Cruise control being
Blank
OFF
Driving
White
Set vehicle speed:
Constant speed cruis-
Green
ing
Green
Set vehicle speed:
Set vehicle speed
Green in reverse dis-
being exceeded
play
Green
2624-5. Using the driving support systemsEmergency Driving Stop● Although the emergency driving stopsystem is designed to decelerate theSystemvehicle within its lane to help avoid orhelp reduce the impact of a collision ifthe system determines that it is difficultThe emergency driving stop systemfor the driver to continue driving, itsis a system which automaticallyeffectiveness may change accordingto various conditions. Therefore, it maydecelerates and stops the vehiclenot always be able to achieve the samewithin its lane if the driver becomeslevel of performance. Also, if the oper-unable to continue driving the vehi-ating conditions are not met, this func-tion will not , such as if they have suffered amedical emergency, etc.● After the emergency driving stop sys-tem operates, if driving becomes pos-During LTA (Lane Tracing Assist)sible again, immediately begin drivingcontrol, if the system does notagain or, if necessary, park the vehicleon the shoulder of the road and set adetect driving operations, such as ifwarning reflector and flare to warnthe driver is not holding the steer-other drivers of your stopped wheel, and determines the● After this system operates, passengersdriver is not responsive, the vehicleshould attend to the driver as neces-will be decelerated and stoppedsary and take appropriate hazard pre-vention measures, such as moving to awithin its current lane to help avoidplace where safety can be ensured,a collision or reduce the impact of asuch as the shoulder of the road a guardrail.● This system detects the condition ofWARNINGthe driver through the operation of thesteering wheel. This system may oper-■ For safe useate if the driver is aware but intention-● Driving safely is solely the responsibil-ally and continuously does not operateity of the driver. Pay careful attentionthe vehicle. Also, the system may notto the surrounding conditions in orderoperate if it cannot determine that theto ensure safe driving.
262
4-5. Using the driving support systems
Emergency Driving Stop
● Although the emergency driving stop
system is designed to decelerate the
System
vehicle within its lane to help avoid or
help reduce the impact of a collision if
the system determines that it is difficult
The emergency driving stop system
for the driver to continue driving, its
is a system which automatically
effectiveness may change according
to various conditions. Therefore, it may
decelerates and stops the vehicle
not always be able to achieve the same
within its lane if the driver becomes
level of performance. Also, if the oper-
unable to continue driving the vehi-
ating conditions are not met, this func-
tion will not operate.
cle, such as if they have suffered a
medical emergency, etc.
● After the emergency driving stop sys-
tem operates, if driving becomes pos-
During LTA (Lane Tracing Assist)
sible again, immediately begin driving
control, if the system does not
again or, if necessary, park the vehicle
on the shoulder of the road and set a
detect driving operations, such as if
warning reflector and flare to warn
the driver is not holding the steer-
other drivers of your stopped vehicle.
ing wheel, and determines the
● After this system operates, passengers
driver is not responsive, the vehicle
should attend to the driver as neces-
will be decelerated and stopped
sary and take appropriate hazard pre-
vention measures, such as moving to a
within its current lane to help avoid
place where safety can be ensured,
a collision or reduce the impact of a
such as the shoulder of the road or
collision.
behind a guardrail.
● This system detects the condition of
WARNING
the driver through the operation of the
steering wheel. This system may oper-
■ For safe use
ate if the driver is aware but intention-
● Driving safely is solely the responsibil-
ally and continuously does not operate
ity of the driver. Pay careful attention
the vehicle. Also, the system may not
to the surrounding conditions in order
operate if it cannot determine that the
to ensure safe driving. The emergency
driver is not responsive, such as if they
driving stop system is designed to pro-
are leaning on the steering wheel.
vide support in an emergency where it
is difficult for the driver to continue
driving, such as if they have had a med-
Summary of the system
ical emergency. It is not designed to
support driving while drowsy or in
Operation of this system is separated
poor physical health, or inattentive
into 4 control states. Through control
driving.
state “warning phase 1” and “warning
phase 2”, the system determines if the
driver is aware and responsive while
outputting a warning and controlling
the vehicle speed. If the system deter-
mines the driver is not responsive, it will
operate in control state “deceleration
2634-5. Using the driving support systemsstop phase” and “stop hold phase” andas holding the steering wheel, are notdecelerate and stop the vehicle. It willperformed within a certain amount ofthen operate continuously in “stop holdtime, the system will enter warningphase”.phase 2.■ Operating conditionsWarning phase 2This system operates when all of the follow-ing conditions are met:After entering warning phase 2, a● When the LTA is onbuzzer will sound in short intervals and● When the vehicle speed is approximatelya message will be displayed to warn30 mph (50 km/h) or morethe driver, and the vehicle will slowly■ Operation cancelation conditionsdecelerate. If driving operations, suchIn the following situations, system operationas holding the steering wheel, are notwill be canceled:performed within a certain amount of● When LTA control has been canceledtime, the system will determine that the(the LTA switch has been pressed, etc.)driver is not responsive and enter the4● When the dynamic radar cruise controldeceleration stop been canceled● When driver operations are detectedThe audio system will be muted until theDriving(the steering wheel is held, the brakedriver becomes , accelerator pedal, parking brake,When the vehicle is decelerating, theemergency flasher switch, or turn signallever is operated)brake lights may illuminate, depending onthe road conditions, etc.● When the driving assist switch is pressedwhile in the stop and hold phase● When the power switch has been turnedDeceleration stop phasefrom ON to off● Situations in which some or all of theAfter entering the deceleration stopfunctions of the system cannot operate:phase, a buzzer will sound continu-P.220ously and a message will be displayed■ LTA control when operation is canceledto warn the driver, and the vehicle willWhen emergency driving stop systemslowly decelerate and stop. After theoperation is canceled, LTA control mayalso be stops, the system will enter thes
263
4-5. Using the driving support systems
stop phase” and “stop hold phase” and
as holding the steering wheel, are not
decelerate and stop the vehicle. It will
performed within a certain amount of
then operate continuously in “stop hold
time, the system will enter warning
phase”.
phase 2.
■ Operating conditions
Warning phase 2
This system operates when all of the follow-
ing conditions are met:
After entering warning phase 2, a
● When the LTA is on
buzzer will sound in short intervals and
● When the vehicle speed is approximately
a message will be displayed to warn
30 mph (50 km/h) or more
the driver, and the vehicle will slowly
■ Operation cancelation conditions
decelerate. If driving operations, such
In the following situations, system operation
as holding the steering wheel, are not
will be canceled:
performed within a certain amount of
● When LTA control has been canceled
time, the system will determine that the
(the LTA switch has been pressed, etc.)
driver is not responsive and enter the
4
● When the dynamic radar cruise control
deceleration stop phase.
has been canceled
● When driver operations are detected
The audio system will be muted until the
Driving
(the steering wheel is held, the brake
driver becomes responsive.
pedal, accelerator pedal, parking brake,
When the vehicle is decelerating, the
emergency flasher switch, or turn signal
lever is operated)
brake lights may illuminate, depending on
the road conditions, etc.
● When the driving assist switch is pressed
while in the stop and hold phase
● When the power switch has been turned
Deceleration stop phase
from ON to off
● Situations in which some or all of the
After entering the deceleration stop
functions of the system cannot operate:
phase, a buzzer will sound continu-
P.220
ously and a message will be displayed
■ LTA control when operation is canceled
to warn the driver, and the vehicle will
When emergency driving stop system
slowly decelerate and stop. After the
operation is canceled, LTA control may
also be canceled.
vehicle stops, the system will enter the
stop and hold phase.
Warning phase 1
Stop hold phase
If driving operations are not detected
after the hands off steering wheel
After the vehicle is stopped, the park-
warning operates, a buzzer will sound
ing brake will be applied automatically.
intermittently and a message will be
After entering the stop and hold phase,
displayed to warn the driver, and the
the buzzer will continue sounding con-
system will judge if the driver is respon-
tinuously and the emergency flashers
sive or not. If driving operations, such
2644-5. Using the driving support systems(hazard lights) will flash to warn otherBSM (Blind Spot Monitor)drivers of the emergency.■ Restricted functions after theThe Blind Spot Monitor is a systemoperation is canceledthat uses rear side radar sensorsinstalled on the inner side of theAfter shifting to the deceleration stoprear bumper on the left and rightphase, the following functions will notside to assist the driver in confirm-be available until the hybrid system ising safety when changing even though the emergencydriving stop system is canceled:WARNING LTA■ Cautions regarding the use of thesystem● The driver is solely responsible for safedriving. Always drive safely, takingcare to observe your surroundings.● The Blind Spot Monitor is a supple-mentary function which alerts thedriver that a vehicle is in a blind spot ofthe outside rear view mirrors or isapproaching rapidly from behind intoa blind spot. Do not overly rely on theBlind Spot Monitor. As the functioncannot judge if it is safe to changelanes, over reliance could lead to anaccident resulting in death or the system may not function correctlyunder certain conditions, the driver’sown visual confirmation of safety is componentsA Center Display
264
4-5. Using the driving support systems
(hazard lights) will flash to warn other
BSM (Blind Spot Monitor)
drivers of the emergency.
■ Restricted functions after the
The Blind Spot Monitor is a system
operation is canceled
that uses rear side radar sensors
installed on the inner side of the
After shifting to the deceleration stop
rear bumper on the left and right
phase, the following functions will not
side to assist the driver in confirm-
be available until the hybrid system is
ing safety when changing lanes.
restarted even though the emergency
driving stop system is canceled:
WARNING
 LTA
■ Cautions regarding the use of the
system
● The driver is solely responsible for safe
driving. Always drive safely, taking
care to observe your surroundings.
● The Blind Spot Monitor is a supple-
mentary function which alerts the
driver that a vehicle is in a blind spot of
the outside rear view mirrors or is
approaching rapidly from behind into
a blind spot. Do not overly rely on the
Blind Spot Monitor. As the function
cannot judge if it is safe to change
lanes, over reliance could lead to an
accident resulting in death or serious
injury.
As the system may not function correctly
under certain conditions, the driver’s
own visual confirmation of safety is nec-
essary.
System components
A Center Display
2654-5. Using the driving support systemsTurning the Blind Spot Monitor on/off.● Keep the sensors and the surroundingareas on the rear bumper clean at allB Outside rear view mirror a vehicle is detected in a blind spotIf a sensor or its surrounding area on theof the outside rear view mirrors orrear bumper is dirty or covered withapproaching rapidly from behind into asnow, the Blind Spot Monitor may notblind spot, the outside rear view mirroroperate and a warning message will beindicator (P.81) on the detected side willdisplayed. In this situation, clear off theilluminate. If the turn signal lever is oper-dirt or snow and drive the vehicle withated toward the detected side, the outsidethe operation conditions of the BSMrear view mirror indicator (P.267) satisfied for approxi-C Driving assist information indicatormately 10 minutes. If the warning mes-sage does not disappear, have theIlluminates when the Blind Spot Monitor isvehicle inspected by your Lexus off. At this time, a message will bedisplayed on the multi-information display.■ Outside rear view mirror indicator visi-4bilityIn strong sunlight, the outside rear view mir-Drivingror indicator may be difficult to see.■ CustomizationSome functions can be customized.● Do not attach accessories, stickers(P.467)(including transparent stickers), alumi-num tape, etc. to a sensor or its sur-WARNINGrounding area on the rear bumper.■ To ensure the system can operate● Do not subject a sensor or its sur-properlyrounding area on the rear bumper to astrong Spot Monitor sensors are installedbehind the left and right sides of the rearIf a sensor is moved even slightly off posi-bumper respectively. Observe the fol-tion, the system may malfunction andlowing to ensure the Blind Spot Monitorvehicles may not be detected operate the following situations, have yourvehicle inspected by your Lexus dealer.• A sensor or its surrounding area issubj
265
4-5. Using the driving support systems
Turning the Blind Spot Monitor on/off.
● Keep the sensors and the surrounding
areas on the rear bumper clean at all
B Outside rear view mirror indicators
times.
When a vehicle is detected in a blind spot
If a sensor or its surrounding area on the
of the outside rear view mirrors or
rear bumper is dirty or covered with
approaching rapidly from behind into a
snow, the Blind Spot Monitor may not
blind spot, the outside rear view mirror
operate and a warning message will be
indicator (P.81) on the detected side will
displayed. In this situation, clear off the
illuminate. If the turn signal lever is oper-
dirt or snow and drive the vehicle with
ated toward the detected side, the outside
the operation conditions of the BSM
rear view mirror indicator flashes.
function (P.267) satisfied for approxi-
C Driving assist information indicator
mately 10 minutes. If the warning mes-
sage does not disappear, have the
Illuminates when the Blind Spot Monitor is
vehicle inspected by your Lexus dealer.
turned off. At this time, a message will be
displayed on the multi-information display.
■ Outside rear view mirror indicator visi-
4
bility
In strong sunlight, the outside rear view mir-
Driving
ror indicator may be difficult to see.
■ Customization
Some functions can be customized.
● Do not attach accessories, stickers
(P.467)
(including transparent stickers), alumi-
num tape, etc. to a sensor or its sur-
WARNING
rounding area on the rear bumper.
■ To ensure the system can operate
● Do not subject a sensor or its sur-
properly
rounding area on the rear bumper to a
strong impact.
Blind Spot Monitor sensors are installed
behind the left and right sides of the rear
If a sensor is moved even slightly off posi-
bumper respectively. Observe the fol-
tion, the system may malfunction and
lowing to ensure the Blind Spot Monitor
vehicles may not be detected correctly.
can operate correctly.
In the following situations, have your
vehicle inspected by your Lexus dealer.
• A sensor or its surrounding area is
subject to a strong impact.
• If the surrounding area of a sensor is
scratched or dented, or part of them
has become disconnected.
● Do not disassemble the sensor.
● Do not modify the sensor or surround-
ing area on the rear bumper.
2664-5. Using the driving support systemsenabled/disabled through a custom-WARNINGize setting. (P.467)● If a sensor or the rear bumper needs toWhen the Blind Spot Monitor is off, thebe removed/installed or replaced,contact your Lexus assist information indicator(P.81) will illuminate and a message● Do not paint the rear bumper anycolor other than an official Lexus be displayed on the multi-informa-tion the Blind Spot MonitorEach time the power switch is turned toon/offON, the Blind Spot Monitor is Blind Spot Monitor can beBlind Spot Monitor operation■ Objects that can be detected while drivingThe Blind Spot Monitor uses rear side radar sensors to detect the following vehi-cles traveling in adjacent lanes and advises the driver of the presence of such vehi-cles via the indicators on the outside rear view mirrors.A Vehicles that are traveling in areas that are not visible using the outside rearview mirrors (the blind spots)B Vehicles that are approaching rapidly from behind in areas that are not visibleusing the outside rear view mirrors (the blind spots)■ Detection range while drivingThe areas that vehicles can be detected in are outlined below.
266
4-5. Using the driving support systems
enabled/disabled through a custom-
WARNING
ize setting. (P.467)
● If a sensor or the rear bumper needs to
When the Blind Spot Monitor is off, the
be removed/installed or replaced,
contact your Lexus dealer.
driving assist information indicator
(P.81) will illuminate and a message
● Do not paint the rear bumper any
color other than an official Lexus color.
will be displayed on the multi-informa-
tion display.
Turning the Blind Spot Monitor
Each time the power switch is turned to
on/off
ON, the Blind Spot Monitor is enabled.
The Blind Spot Monitor can be
Blind Spot Monitor operation
■ Objects that can be detected while driving
The Blind Spot Monitor uses rear side radar sensors to detect the following vehi-
cles traveling in adjacent lanes and advises the driver of the presence of such vehi-
cles via the indicators on the outside rear view mirrors.
A Vehicles that are traveling in areas that are not visible using the outside rear
view mirrors (the blind spots)
B Vehicles that are approaching rapidly from behind in areas that are not visible
using the outside rear view mirrors (the blind spots)
■ Detection range while driving
The areas that vehicles can be detected in are outlined below.
2674-5. Using the driving support systemsThe range of each detection area is:A Approximately 1.6 ft. (0.5 m) to 11.5 ft. (3.5 m) from either side of the vehicle *1B Approximately 3.3 ft. (1 m) forward of the rear bumperC Approximately 9.8 ft. (3 m) from the rear bumperD Approximately 9.8 ft. (3 m) to 197 ft. (60 m) from the rear bumper *24*1: The area between the side of the vehicle and 1.6 ft. (0.5 m) from the side of the vehiclecannot be *2 : The greater the difference in speed between your vehicle and the detected vehicle is,the farther away the vehicle will be detected, causing the outside rear view mirror indi-cator to illuminate or flash.■ The Blind Spot Monitor linked■ The Blind Spot Monitor will detect avehicle whenfunctionThe Blind Spot Monitor will detect a vehicleThe LDA (Lane Departure Alert) has apresent in the detection area in the follow-function that uses information ofing situations:detected vehicles driving in an adja-● A vehicle in an adjacent lane overtakesyour lane. For details about the func-● You overtake a vehicle in an adjacenttion and its operating conditions,lane slowly.P.235.● Another vehicle enters the detectionarea when it changes lanes.■ The Blind Spot Monitor is operational■ Situations in which the Blind Spot Moni-whentor cannot detect vehiclesThe Blind Spot Monitor is operational whenThe Blind Spot Monitor cannot detect theall of the following conditions are met:following vehicles and other objects:● The power switch is in ON.● Small motorcycles, bicycles, pedestrians,● The Blind Spot Monitor is . *● The shift position is in a position other● Vehicles traveling in the opposite direc-than ● The vehicle speed is approximately 7● Guardrails, walls, signs, parked vehiclesmph (10 km/h) or similar stationary objects *● Following vehicles that are in the same
267
4-5. Using the driving support systems
The range of each detection area is:
A Approximately 1.6 ft. (0.5 m) to 11.5 ft. (3.5 m) from either side of the vehicle *1
B Approximately 3.3 ft. (1 m) forward of the rear bumper
C Approximately 9.8 ft. (3 m) from the rear bumper
D Approximately 9.8 ft. (3 m) to 197 ft. (60 m) from the rear bumper *2
4
*1
: The area between the side of the vehicle and 1.6 ft. (0.5 m) from the side of the vehicle
cannot be detected.
Driving
*2 : The greater the difference in speed between your vehicle and the detected vehicle is,
the farther away the vehicle will be detected, causing the outside rear view mirror indi-
cator to illuminate or flash.
■ The Blind Spot Monitor linked
■ The Blind Spot Monitor will detect a
vehicle when
function
The Blind Spot Monitor will detect a vehicle
The LDA (Lane Departure Alert) has a
present in the detection area in the follow-
function that uses information of
ing situations:
detected vehicles driving in an adja-
● A vehicle in an adjacent lane overtakes
your vehicle.
cent lane. For details about the func-
● You overtake a vehicle in an adjacent
tion and its operating conditions,
lane slowly.
P.235.
● Another vehicle enters the detection
area when it changes lanes.
■ The Blind Spot Monitor is operational
■ Situations in which the Blind Spot Moni-
when
tor cannot detect vehicles
The Blind Spot Monitor is operational when
The Blind Spot Monitor cannot detect the
all of the following conditions are met:
following vehicles and other objects:
● The power switch is in ON.
● Small motorcycles, bicycles, pedestrians,
● The Blind Spot Monitor is on.
etc. *
● The shift position is in a position other
● Vehicles traveling in the opposite direc-
than R.
tion
● The vehicle speed is approximately 7
● Guardrails, walls, signs, parked vehicles
mph (10 km/h) or more.
and similar stationary objects *
● Following vehicles that are in the same
2684-5. Using the driving support systemslane *vehicle that enters the detection area• Immediately after the Blind Spot Monitor● Vehicles traveling 2 lanes away fromis turned onyour vehicle *• When towing with the vehicle● Vehicles which are being overtaken rap-● Instances of the Blind Spot Monitoridly by your vehicle *unnecessarily detecting a vehicle and/orobject may increase in the following situ-*: Depending on the conditions, detectionations:of a vehicle and/or object may occur.• When the sensor is misaligned due to astrong impact to the sensor or its sur-■ Conditions under which the system mayrounding areanot function correctly• When the distance between your vehicle● The Blind Spot Monitor may not detectand a guardrail, wall, etc. that enters thevehicles correctly in the following situa-detection area is shorttions:• When driving up and down consecutive• When the sensor is misaligned due to asteep inclines, such as hills, dips in thestrong impact to the sensor or its sur-road, area• When vehicle lanes are narrow, or when• When mud, snow, ice, a sticker, etc., isdriving on the edge of a lane, and a vehi-covering the sensor or surrounding areacle traveling in a lane other than the adja-on the rear bumpercent lanes enters the detection area• When driving on a road surface that is• When driving on roads with sharp bends,wet with standing water during badconsecutive curves, or uneven surfacesweather, such as heavy rain, snow, or fog• When the tires are slipping or spinning• When multiple vehicles are approaching• When the distance between your vehiclewith only a small gap between each vehi-and a following vehicle is shortcle• When an accessory (such as a bicycle• When the distance between your vehiclecarrier) is installed to the rear of the vehi-and a following vehicle is shortcle• When there is a significant difference in• When towing with the vehiclespeed between your vehicle and thevehicle that enters the detection area• When the difference in spee
268
4-5. Using the driving support systems
lane *
vehicle that enters the detection area
• Immediately after the Blind Spot Monitor
● Vehicles traveling 2 lanes away from
is turned on
your vehicle *
• When towing with the vehicle
● Vehicles which are being overtaken rap-
● Instances of the Blind Spot Monitor
idly by your vehicle *
unnecessarily detecting a vehicle and/or
object may increase in the following situ-
*
: Depending on the conditions, detection
ations:
of a vehicle and/or object may occur.
• When the sensor is misaligned due to a
strong impact to the sensor or its sur-
■ Conditions under which the system may
rounding area
not function correctly
• When the distance between your vehicle
● The Blind Spot Monitor may not detect
and a guardrail, wall, etc. that enters the
vehicles correctly in the following situa-
detection area is short
tions:
• When driving up and down consecutive
• When the sensor is misaligned due to a
steep inclines, such as hills, dips in the
strong impact to the sensor or its sur-
road, etc.
rounding area
• When vehicle lanes are narrow, or when
• When mud, snow, ice, a sticker, etc., is
driving on the edge of a lane, and a vehi-
covering the sensor or surrounding area
cle traveling in a lane other than the adja-
on the rear bumper
cent lanes enters the detection area
• When driving on a road surface that is
• When driving on roads with sharp bends,
wet with standing water during bad
consecutive curves, or uneven surfaces
weather, such as heavy rain, snow, or fog
• When the tires are slipping or spinning
• When multiple vehicles are approaching
• When the distance between your vehicle
with only a small gap between each vehi-
and a following vehicle is short
cle
• When an accessory (such as a bicycle
• When the distance between your vehicle
carrier) is installed to the rear of the vehi-
and a following vehicle is short
cle
• When there is a significant difference in
• When towing with the vehicle
speed between your vehicle and the
vehicle that enters the detection area
• When the difference in speed between
your vehicle and another vehicle is
changing
• When a vehicle enters a detection area
traveling at about the same speed as your
vehicle
• As your vehicle starts from a stop, a vehi-
cle remains in the detection area
• When driving up and down consecutive
steep inclines, such as hills, dips in the
road, etc.
• When driving on roads with sharp bends,
consecutive curves, or uneven surfaces
• When vehicle lanes are wide, or when
driving on the edge of a lane, and the
vehicle in an adjacent lane is far away
from your vehicle
• When an accessory (such as a bicycle
carrier) is installed to the rear of the vehi-
cle
• When there is a significant difference in
height between your vehicle and the
2694-5. Using the driving support systemsA Center DisplaySafe Exit AssistTurning the safe exit assist on/ safe exit assist is a system thatB Outside rear view mirror indicatorsuses rear side radar sensorsWhen a vehicle or bicycle which may col-installed on the inner side of thelide with a door (other than the back door)rear bumper to help occupantswhen opened is detected, the outside rearjudge if an approaching vehicle orview mirror indicator (P.81) on thedetected side will illuminate. If the door onbicycle may collide with a doorthe detected side is opened, the outsidewhen exiting, to help reduce therear view mirror indicator will of a collision.C Multi-information displayWARNINGIf collision with a door is likely and the dooris opened, the door will be displayed on the■ Cautions regarding the use of thesystemmulti-information display. Also, if a door isopened when an outside rear view mirror● The driver is solely responsible for safe4driving. Always drive safely, takingindicator is illuminated, a buzzer will soundcare to observe your a warning.● The safe exit assist is a supplementaryDrivingD Driving assist information indicatorsystem that, when the vehicle isIlluminates when the safe exit assist isstopped, informs occupants of theturned off. At this time, a message will beexistence of approaching vehicles andbicycles. As this system alone cannotdisplayed on the multi-information used to judge safety, over-relianceon this system may lead to an accident■ Outside rear view mirror indicator visi-resulting in death or serious certain situations, this system may notIn strong sunlight, the outside rear view mir-function to its fullest extent. Therefore it isror indicator may be difficult to for the occupants to visually■ Buzzercheck for safety directly and using theIf the volume setting of the audio system or the surrounding area is loud, it maybe difficult to hear the buzze
269
4-5. Using the driving support systems
A Center Display
Safe Exit Assist
Turning the safe exit assist on/off.
The safe exit assist is a system that
B Outside rear view mirror indicators
uses rear side radar sensors
When a vehicle or bicycle which may col-
installed on the inner side of the
lide with a door (other than the back door)
rear bumper to help occupants
when opened is detected, the outside rear
judge if an approaching vehicle or
view mirror indicator (P.81) on the
detected side will illuminate. If the door on
bicycle may collide with a door
the detected side is opened, the outside
when exiting, to help reduce the
rear view mirror indicator will blink.
possibility of a collision.
C Multi-information display
WARNING
If collision with a door is likely and the door
is opened, the door will be displayed on the
■ Cautions regarding the use of the
system
multi-information display. Also, if a door is
opened when an outside rear view mirror
● The driver is solely responsible for safe
4
driving. Always drive safely, taking
indicator is illuminated, a buzzer will sound
care to observe your surroundings.
as a warning.
● The safe exit assist is a supplementary
Driving
D Driving assist information indicator
system that, when the vehicle is
Illuminates when the safe exit assist is
stopped, informs occupants of the
turned off. At this time, a message will be
existence of approaching vehicles and
bicycles. As this system alone cannot
displayed on the multi-information display.
be used to judge safety, over-reliance
on this system may lead to an accident
■ Outside rear view mirror indicator visi-
resulting in death or serious injury.
bility
In certain situations, this system may not
In strong sunlight, the outside rear view mir-
function to its fullest extent. Therefore it is
ror indicator may be difficult to see.
necessary for the occupants to visually
■ Buzzer
check for safety directly and using the
If the volume setting of the audio system is
mirrors.
high or the surrounding area is loud, it may
be difficult to hear the buzzer.
System components
■ Customization
Some functions can be customized.
(P.469)
WARNING
■ To ensure the system can operate
properly
P.265
2704-5. Using the driving support systemsWhen the safe exit assist is off, the driv-Turning the safe exit assist sys-ing assist information indicator will illu-tem ON/OFFminate and a message will be displayedon the multi-information safe exit assist system can beenabled/disabled through a custom-Each time the power switch is turned toize setting. (P.469)ON, the safe exit assist is exit assist operation■ Objects that can be detected by the safe exit assistWhen the safe exit assist detects the following vehicles or bicycles behind yourvehicle using a rear side radar sensor, the occupants of the vehicle are informedthrough an outside rear view mirror indicator, buzzer, and the multi-informationdisplay.A Vehicle or bicycle which has a high possibility of colliding with a door (otherthan the back door) when opened■ The safe exit assist detection areasThe areas that vehicles can be detected in are outlined below.A Approximately 145 ft. (45 m) rearward from the front door **: The faster a vehicle or bicycle is approaching, the distance at which an outside rear viewmirror indicator will illuminate or blink will become further.
270
4-5. Using the driving support systems
When the safe exit assist is off, the driv-
Turning the safe exit assist sys-
ing assist information indicator will illu-
tem ON/OFF
minate and a message will be displayed
on the multi-information display.
The safe exit assist system can be
enabled/disabled through a custom-
Each time the power switch is turned to
ize setting. (P.469)
ON, the safe exit assist is enabled.
Safe exit assist operation
■ Objects that can be detected by the safe exit assist
When the safe exit assist detects the following vehicles or bicycles behind your
vehicle using a rear side radar sensor, the occupants of the vehicle are informed
through an outside rear view mirror indicator, buzzer, and the multi-information
display.
A Vehicle or bicycle which has a high possibility of colliding with a door (other
than the back door) when opened
■ The safe exit assist detection areas
The areas that vehicles can be detected in are outlined below.
A Approximately 145 ft. (45 m) rearward from the front door *
*
: The faster a vehicle or bicycle is approaching, the distance at which an outside rear view
mirror indicator will illuminate or blink will become further.
2714-5. Using the driving support systems• When 3 minutes or more have elapsed■ The safe exit assist is operational whensince the hybrid system off (the timewhich operation is possible may beThe safe exit assist is operational when all ofextended if a door is opened and closed)the following conditions are met:• When your vehicle is not completely● When the power switch is ON, less thanstopped3 minutes have elapsed since the hybrid■ Conditions under which the system maysystem was off, or less than 3 minutesnot function correctlyhave elapsed since a door was openedand someone has entered the vehicle● The safe exit assist may not detect vehi-(the time which operation is possible maycles correctly in the following situations:be extended if a door is opened and• When the sensor is misaligned due to aclosed)strong impact to the sensor or its sur-rounding area● Safe exit assist is on• When mud, snow, ice, a sticker, etc., is● The vehicle is the sensor or surrounding area● The shift position is in a position otheron the rear bumperthan R.• When driving on a road surface that iswet with standing water during bad■ The safe exit assist will detect a vehicleweather, such as heavy rain, snow, or fogwhen• When a vehicle or bicycle approaches4The safe exit assist will detect a vehiclefrom behind a nearby parked vehiclepresent in the detection area in the follow-• When an approaching vehicle or bicycleing situations:suddenly changes directionDriving• Immediately after a vehicle or bicycle● When the vehicle is stopped and a vehi-starts movingcle or bicycle, which is traveling parallel• When the back door is opento the vehicle, is approaching within the• When a bicycle carrier, ramp, or otherarea that a door opens (other than theaccessory is installed to the back of theback door)vehicle■ Conditions under which the system will• When a parked vehicle, wall, sign, personnot detect a vehicleor other stationary object is behind thevehicle● Safe exit assist does not detect
271
4-5. Using the driving support systems
• When 3 minutes or more have elapsed
■ The safe exit assist is operational when
since the hybrid system off (the time
which operation is possible may be
The safe exit assist is operational when all of
extended if a door is opened and closed)
the following conditions are met:
• When your vehicle is not completely
● When the power switch is ON, less than
stopped
3 minutes have elapsed since the hybrid
■ Conditions under which the system may
system was off, or less than 3 minutes
not function correctly
have elapsed since a door was opened
and someone has entered the vehicle
● The safe exit assist may not detect vehi-
(the time which operation is possible may
cles correctly in the following situations:
be extended if a door is opened and
• When the sensor is misaligned due to a
closed)
strong impact to the sensor or its sur-
rounding area
● Safe exit assist is on
• When mud, snow, ice, a sticker, etc., is
● The vehicle is stopped.
covering the sensor or surrounding area
● The shift position is in a position other
on the rear bumper
than R.
• When driving on a road surface that is
wet with standing water during bad
■ The safe exit assist will detect a vehicle
weather, such as heavy rain, snow, or fog
when
• When a vehicle or bicycle approaches
4
The safe exit assist will detect a vehicle
from behind a nearby parked vehicle
present in the detection area in the follow-
• When an approaching vehicle or bicycle
ing situations:
suddenly changes direction
Driving
• Immediately after a vehicle or bicycle
● When the vehicle is stopped and a vehi-
starts moving
cle or bicycle, which is traveling parallel
• When the back door is open
to the vehicle, is approaching within the
• When a bicycle carrier, ramp, or other
area that a door opens (other than the
accessory is installed to the back of the
back door)
vehicle
■ Conditions under which the system will
• When a parked vehicle, wall, sign, person
not detect a vehicle
or other stationary object is behind the
vehicle
● Safe exit assist does not detect the fol-
• When the vehicle is stopped at an angle
lowing objects, vehicles, and bicycles:
to the road
• Vehicles or bicycles which are approach-
• When a vehicle is traveling near an
ing slowly *
approaching vehicle or bicycle
• Vehicles or bicycles which are deter-
• When an approaching vehicle or bicycle
mined to have a low possibility of collid-
is traveling along a stationary object, such
ing with a door (other than the back
a wall or sign
door) when opened *
• When a vehicle or bicycle is approaching
• Vehicles or bicycles which are approach-
at high speed
ing from directly behind *
• When towing with the vehicle
• Vehicles or bicycles which are approach-
• When stopped on a steep slope
ing from the front *
• When stopped on a curve or at the exit of
a curve
• Guardrails, walls, signs, parked vehicles,
and other stationary objects *
● Instances of the safe exit assist unneces-
sarily detecting a vehicle and/or object
• Pedestrians, animals, etc. *
may increase in the following situations:
* : Depending on the conditions, detection
• When the sensor is misaligned due to a
of a vehicle and/or object may occur.
strong impact to the sensor or its sur-
rounding area
● In situations such as the following, safe
• When a vehicle or bicycle approaches
exit assist will not operate:
your vehicle from directly behind in an
2724-5. Using the driving support systemsoffset positionIntuitive parking assist• When the vehicle is stopped at an angleto the road• When a vehicle or bicycle approachesThe intuitive parking assist functionfrom behind a parked vehicle at an angledetects the approximate distance• When a parked vehicle, wall, sign, personor other stationary object is behind thefrom the vehicle and an object suchvehicleas a wall using ultrasonic sensors• When an approaching vehicle or bicycleand informs the driver with thesuddenly changes direction• When an approaching vehicle or bicycleCenter Display distance displayis traveling along a stationary object, suchand buzzer.a wall or sign• When the back door is open• When a bicycle carrier, ramp, or otherSystem componentsaccessory is installed to the back of thevehicle• When a vehicle or bicycle is approaching■ Type of sensorsat high speed• When towing with the vehicle• When stopped on a steep slope• When stopped on a curve or at the exit ofa curve• When a vehicle or bicycle approachesfrom behind a vehicle stopped in an adja-cent laneA Front corner sensorsB Front center sensorsC Rear corner sensorsD Rear center sensors■ DisplayWhen the sensors detect an object,such as a wall, a graphic is shown onthe Center Display depending on theposition and distance to the without Center Display orrear camera: When detecting a sta-tionary object, the intuitive parkingassist detection indicator illuminates.(P.81)
272
4-5. Using the driving support systems
offset position
Intuitive parking assist
• When the vehicle is stopped at an angle
to the road
• When a vehicle or bicycle approaches
The intuitive parking assist function
from behind a parked vehicle at an angle
detects the approximate distance
• When a parked vehicle, wall, sign, person
or other stationary object is behind the
from the vehicle and an object such
vehicle
as a wall using ultrasonic sensors
• When an approaching vehicle or bicycle
and informs the driver with the
suddenly changes direction
• When an approaching vehicle or bicycle
Center Display distance display
is traveling along a stationary object, such
and buzzer.
a wall or sign
• When the back door is open
• When a bicycle carrier, ramp, or other
System components
accessory is installed to the back of the
vehicle
• When a vehicle or bicycle is approaching
■ Type of sensors
at high speed
• When towing with the vehicle
• When stopped on a steep slope
• When stopped on a curve or at the exit of
a curve
• When a vehicle or bicycle approaches
from behind a vehicle stopped in an adja-
cent lane
A Front corner sensors
B Front center sensors
C Rear corner sensors
D Rear center sensors
■ Display
When the sensors detect an object,
such as a wall, a graphic is shown on
the Center Display depending on the
position and distance to the object.
Vehicles without Center Display or
rear camera: When detecting a sta-
tionary object, the intuitive parking
assist detection indicator illuminates.
(P.81)
2734-5. Using the driving support systems Center Displaytor will turn off if the shift position ischanged to the shift position is R, the intui-tive parking assist cannot be turned onor setting of intuitive parking assistitself will not ■ Cautions regarding the use of theA Front corner sensor detectionsystemThere is a limit to the degree of recogni-B Front center sensor detectiontion accuracy and control performanceC Rear corner sensor detectionthat this system can provide, do notoverly rely on this system. The driver isD Rear center sensor detectionalways responsible for paying attentionto the vehicle’s surroundings and the intuitive parking■ To ensure the system can operateDrivingassist function ON/OFFproperlyMake sure to observe the following pre-The intuitive parking assist function cancautions. The system may not operatebe enabled/disabled through a cus-properly and may lead to an unexpectedaccident. When these precautions can-tomize setting. (P.468)not be observed, turn the system the intuitive parking assist func-● Do not damage the sensors, andtion is disabled, the intuitive parkingalways keep them OFF indicator (P.81) illumi-● Do not attach a sticker or install annates on the multi-information component, such as a back-lit license plate (especially fluorescentIf the system switches to OFF (dis-type), fog lights, fender pole or wire-abled) and the intuitive parking assist isless antenna near a radar , the intuitive parking assist will● Do not subject the surrounding area ofnot be re-enabled until ON (enabled)the sensor to a strong impact. If sub-is selected again from the customizejected to an impact, have the vehiclesetting (P.468).inspected by your Lexus dealer. If thefront or rear bumper needs to be(It remains off even if the power switchremoved/installed or replaced, con-tact your Lexus turned to ON again after the powerswitch has been
273
4-5. Using the driving support systems
 Center Display
tor will turn off if the shift position is
changed to R.
When the shift position is R, the intui-
tive parking assist cannot be turned on
or off.
The setting of intuitive parking assist
itself will not change.
WARNING
■ Cautions regarding the use of the
A Front corner sensor detection
system
There is a limit to the degree of recogni-
B Front center sensor detection
tion accuracy and control performance
C Rear corner sensor detection
that this system can provide, do not
overly rely on this system. The driver is
D Rear center sensor detection
always responsible for paying attention
to the vehicle’s surroundings and driving
4
safely.
Turning the intuitive parking
■ To ensure the system can operate
Driving
assist function ON/OFF
properly
Make sure to observe the following pre-
The intuitive parking assist function can
cautions. The system may not operate
be enabled/disabled through a cus-
properly and may lead to an unexpected
accident. When these precautions can-
tomize setting. (P.468)
not be observed, turn the system off.
When the intuitive parking assist func-
● Do not damage the sensors, and
tion is disabled, the intuitive parking
always keep them clean.
assist OFF indicator (P.81) illumi-
● Do not attach a sticker or install an
nates on the multi-information display.
electronic component, such as a back-
lit license plate (especially fluorescent
If the system switches to OFF (dis-
type), fog lights, fender pole or wire-
abled) and the intuitive parking assist is
less antenna near a radar sensor.
stopped, the intuitive parking assist will
● Do not subject the surrounding area of
not be re-enabled until ON (enabled)
the sensor to a strong impact. If sub-
is selected again from the customize
jected to an impact, have the vehicle
setting (P.468).
inspected by your Lexus dealer. If the
front or rear bumper needs to be
(It remains off even if the power switch
removed/installed or replaced, con-
tact your Lexus dealer.
is turned to ON again after the power
switch has been turned off.)
● Do not modify, disassemble or paint
the sensors.
Vehicles without the Center Display or
rear camera: However, the system will
● Do not attach a license plate cover.
automatically turn on (enabled) and
● Keep your tires properly inflated.
the intuitive parking assist OFF indica-
2744-5. Using the driving support systems● It may be difficult to hear the sound of thisWARNINGsystem due to the buzzers of other sys-tems.● Do not install a suspension other thana genuine suspension.● If the meter malfunctions, the buzzer maynot sound.■ Notes when washing the vehicle■ Objects which the system may not be● When using a high pressure washer toproperly detectedwash the vehicle, do not spray the sen-The shape of the object may prevent thesors directly, as doing so may cause asensor from detecting it. Pay particularsensor to to the following objects:● When using steam to clean the vehi-● Wires, fences, ropes, , do not direct steam too close to● Cotton, snow and other materials thatthe sensors as doing so may cause aabsorb sound wavessensor to malfunction.● Sharply-angled objects● Low objects■ The system can be operated when● Tall objects with upper sections project-● The power switch is in outwards in the direction of your vehi-● The intuitive parking assist function is ● The vehicle speed is less than about 6People may not be detected if they aremph (10 km/h).wearing certain types of clothing.● A shift position other than P is selected.■ Situations in which the system may notoperate properlyVehicles without the Center Display or rearcamera: The system will automatically turnCertain vehicle conditions and the sur-on (enabled) and the intuitive parking assistrounding environment may affect the abilityOFF indicator will turn off if the shift posi-of a sensor to correctly detect objects. Par-tion is changed to instances where this may occur arelisted setting of intuitive parking assist itselfwill not change.● There is dirt, snow, water drops or ice ona sensor. (Cleaning the sensors will■ Sensor detection informationresolve this problem.)● The sensor’s detection areas are limited● A sensor is frozen. (Thawing the area willto the areas around the vehicle’s frontresolve this problem.) In especially
274
4-5. Using the driving support systems
● It may be difficult to hear the sound of this
WARNING
system due to the buzzers of other sys-
tems.
● Do not install a suspension other than
a genuine suspension.
● If the meter malfunctions, the buzzer may
not sound.
■ Notes when washing the vehicle
■ Objects which the system may not be
● When using a high pressure washer to
properly detected
wash the vehicle, do not spray the sen-
The shape of the object may prevent the
sors directly, as doing so may cause a
sensor from detecting it. Pay particular
sensor to malfunction.
attention to the following objects:
● When using steam to clean the vehi-
● Wires, fences, ropes, etc.
cle, do not direct steam too close to
● Cotton, snow and other materials that
the sensors as doing so may cause a
absorb sound waves
sensor to malfunction.
● Sharply-angled objects
● Low objects
■ The system can be operated when
● Tall objects with upper sections project-
● The power switch is in ON.
ing outwards in the direction of your vehi-
● The intuitive parking assist function is on.
cle
● The vehicle speed is less than about 6
People may not be detected if they are
mph (10 km/h).
wearing certain types of clothing.
● A shift position other than P is selected.
■ Situations in which the system may not
operate properly
Vehicles without the Center Display or rear
camera: The system will automatically turn
Certain vehicle conditions and the sur-
on (enabled) and the intuitive parking assist
rounding environment may affect the ability
OFF indicator will turn off if the shift posi-
of a sensor to correctly detect objects. Par-
tion is changed to R.
ticular instances where this may occur are
listed below.
The setting of intuitive parking assist itself
will not change.
● There is dirt, snow, water drops or ice on
a sensor. (Cleaning the sensors will
■ Sensor detection information
resolve this problem.)
● The sensor’s detection areas are limited
● A sensor is frozen. (Thawing the area will
to the areas around the vehicle’s front
resolve this problem.) In especially cold
and rear bumpers.
weather, if a sensor is frozen the sensor
● Certain vehicle conditions and the sur-
display may be displayed abnormally, or
rounding environment may affect the
objects, such as a wall, may not be
ability of a sensor to correctly detect an
detected.
object.
● When a sensor or the area around a sen-
● Objects may not be detected if they are
sor is extremely hot or cold.
too close to the sensor.
● There will be a short delay between
object detection and display. Even at low
speeds, there is a possibility that the
object will come within the sensor’s
detection areas before the display is
shown and the warning beep sounds.
● It might be difficult to hear the buzzer due
to the volume of the audio system or air
flow noise of the air conditioning system.
● On an extremely bumpy road, on an
2754-5. Using the driving support systemsincline, on gravel, or on may operate even though there isno possibility of a collision.● When vehicle horns, vehicle detectors,motorcycle engines, air brakes of large● When driving on a narrow , the clearance sonar of othervehicles or other devices which produceultrasonic waves are near the vehicle.● A sensor is coated with a sheet of sprayor heavy rain.● If objects draw too close to the sensor.● When a pedestrian is wearing clothingthat does not reflect ultrasonic waves ( with gathers or frills).● When driving toward a banner, flag, low-● When objects that are not perpendicularhanging branch or boom barrier (such asto the ground, not perpendicular to thethose used at railroad crossings, tollvehicle traveling direction, uneven, orgates and parking lots).waving are in the detection range.● When there is a rut or hole in the surface● When strong winds are the road.● When driving in inclement weather such● When driving on a metal cover (grating),4as fog, snow or a as those used for drainage ditches.● When an object that cannot be detected● When driving up or down a steep between the vehicle and a detectedDriving● If a sensor is hit by a large amount , such as when driving on a flooded● If an object such as a vehicle, motorcycle, or pedestrian cuts in front of the● There is dirt, snow, water drops or ice onvehicle or runs out from the side of thea sensor. (Cleaning the sensors this problem.)● If the orientation of a sensor has been● A sensor is coated with a sheet of spraychanged due to a collision or otheror heavy .● When driving in inclement weather such● When equipment such as a towing eye-as fog, snow or a , transport hook, bumper protector,● When strong winds are trim, bicycle carrier or snow-removal device (snow plow) is installednear the sensor● If the front of the vehi
275
4-5. Using the driving support systems
incline, on gravel, or on grass.
system may operate even though there is
no possibility of a collision.
● When vehicle horns, vehicle detectors,
motorcycle engines, air brakes of large
● When driving on a narrow road.
vehicles, the clearance sonar of other
vehicles or other devices which produce
ultrasonic waves are near the vehicle.
● A sensor is coated with a sheet of spray
or heavy rain.
● If objects draw too close to the sensor.
● When a pedestrian is wearing clothing
that does not reflect ultrasonic waves (ex.
skirts with gathers or frills).
● When driving toward a banner, flag, low-
● When objects that are not perpendicular
hanging branch or boom barrier (such as
to the ground, not perpendicular to the
those used at railroad crossings, toll
vehicle traveling direction, uneven, or
gates and parking lots).
waving are in the detection range.
● When there is a rut or hole in the surface
● When strong winds are blowing.
of the road.
● When driving in inclement weather such
● When driving on a metal cover (grating),
4
as fog, snow or a sandstorm.
such as those used for drainage ditches.
● When an object that cannot be detected
● When driving up or down a steep slope.
is between the vehicle and a detected
Driving
● If a sensor is hit by a large amount of
object.
water, such as when driving on a flooded
● If an object such as a vehicle, motorcycle,
road.
bicycle or pedestrian cuts in front of the
● There is dirt, snow, water drops or ice on
vehicle or runs out from the side of the
a sensor. (Cleaning the sensors will
vehicle.
resolve this problem.)
● If the orientation of a sensor has been
● A sensor is coated with a sheet of spray
changed due to a collision or other
or heavy rain.
impact.
● When driving in inclement weather such
● When equipment such as a towing eye-
as fog, snow or a sandstorm.
let, transport hook, bumper protector,
● When strong winds are blowing.
bumper trim, bicycle carrier or snow-
removal device (snow plow) is installed
near the sensor
● If the front of the vehicle is raised or low-
ered due to the carried load.
● If the vehicle cannot be driven in a stable
manner, such as when the vehicle has
been in an accident or is malfunctioning.
● When tire chains, compact spare tire or
an emergency tire puncture repair kit are
● When vehicle horns, vehicle detectors,
used.
motorcycle engines, air brakes of large
vehicles, the clearance sonar of other
● When towing with the vehicle
vehicles or other devices which produce
■ Situations in which the system may
ultrasonic waves are near the vehicle.
operate even if there is no possibility of a
● If the front of the vehicle is raised or low-
collision
ered due to the carried load.
In some situations, such as the following, the
2764-5. Using the driving support systems● If the orientation of a sensor has beenSensor detection display, objectchanged due to a collision or otherdistanceimpact.● The vehicle is approaching a tall or■ Detection range of the sensorscurved curb.● Driving close to columns (H-shaped steelbeams, etc.) in multi-story parkinggarages, construction sites, etc.● If the vehicle cannot be driven in a stablemanner, such as when the vehicle hasbeen in an accident or is malfunctioning.● On an extremely bumpy road, on anincline, on gravel, or on grass.A Approximately 3.3 ft. (100 cm)● When tire chains, compact spare tire orB Approximately 4.9 ft. (150 cm)an emergency tire puncture repair kit areused.C Approximately 2.0 ft. (60 cm)● When towing with the vehicleThe diagram shows the detection range ofthe sensors. Note that the sensors cannotdetect objects that are extremely close tothe range of the sensors may changedepending on the shape of the object, etc.■ The distance and buzzerApproximate distance to obstacleBuzzerFront center sensor:Approximately 3.3 ft. (100 cm) to 2.0 ft. (60 cm) *SlowRear center sensor:Approximately 4.9 ft. (150 cm) to 2.0 ft. (60 cm) *Approximately 2.0 ft. (60 cm) to 1.5 ft. (45 cm) *MediumApproximately 1.5 ft. (45 cm) to 1.0 ft. (30 cm) *FastApproximately less than 1.0 ft. (30 cm)Continuous
276
4-5. Using the driving support systems
● If the orientation of a sensor has been
Sensor detection display, object
changed due to a collision or other
distance
impact.
● The vehicle is approaching a tall or
■ Detection range of the sensors
curved curb.
● Driving close to columns (H-shaped steel
beams, etc.) in multi-story parking
garages, construction sites, etc.
● If the vehicle cannot be driven in a stable
manner, such as when the vehicle has
been in an accident or is malfunctioning.
● On an extremely bumpy road, on an
incline, on gravel, or on grass.
A Approximately 3.3 ft. (100 cm)
● When tire chains, compact spare tire or
B Approximately 4.9 ft. (150 cm)
an emergency tire puncture repair kit are
used.
C Approximately 2.0 ft. (60 cm)
● When towing with the vehicle
The diagram shows the detection range of
the sensors. Note that the sensors cannot
detect objects that are extremely close to
the vehicle.
The range of the sensors may change
depending on the shape of the object, etc.
■ The distance and buzzer
Approximate distance to obstacle
Buzzer
Front center sensor:
Approximately 3.3 ft. (100 cm) to 2.0 ft. (60 cm) *
Slow
Rear center sensor:
Approximately 4.9 ft. (150 cm) to 2.0 ft. (60 cm) *
Approximately 2.0 ft. (60 cm) to 1.5 ft. (45 cm) *
Medium
Approximately 1.5 ft. (45 cm) to 1.0 ft. (30 cm) *
Fast
Approximately less than 1.0 ft. (30 cm)
Continuous
2774-5. Using the driving support systems*: Automatic buzzer mute function is enabled. (P.277)or the system is temporarily parking assist buzzer• When the operating function is disabledmanually.A buzzer sounds when the sensors are• When the power switch is turned . The buzzer beeps faster as the vehi-cle approaches a static the vehicle comes within theapproximately 1.0 ft. (30 cm) of theobject, the buzzer will sound contin-uously. When 2 or more sensors simultane-ously detect a static object, thebuzzer sounds for the nearest4object. After a buzzer begins sounding, ifDrivingthe distance between the vehicleand the detected a static objectdoes not become shorter, thebuzzer will be muted automatically.(automatic buzzer mute function)■ Adjusting the buzzer volumeThe buzzer volume of the intuitive parkingassist, and RCTA can all be changed atonce from the customize settings.(P.468)■ Muting a buzzerWhen the temporary mute switch is dis-played on the Center Display, this switchcan be pressed to temporarily mute the switch to mute a buzzer of theintuitive parking assist and RCTA alltogether.● Mute will be automatically canceled inthe following situations:• When the shift position is changed.• When the vehicle speed exceeds a cer-tain speed.• When there is a malfunction in a sensor
277
4-5. Using the driving support systems
*
: Automatic buzzer mute function is enabled. (P.277)
or the system is temporarily unavailable.
Intuitive parking assist buzzer
• When the operating function is disabled
manually.
A buzzer sounds when the sensors are
• When the power switch is turned off.
operating.
 The buzzer beeps faster as the vehi-
cle approaches a static object.
When the vehicle comes within the
approximately 1.0 ft. (30 cm) of the
object, the buzzer will sound contin-
uously.
 When 2 or more sensors simultane-
ously detect a static object, the
buzzer sounds for the nearest
4
object.
 After a buzzer begins sounding, if
Driving
the distance between the vehicle
and the detected a static object
does not become shorter, the
buzzer will be muted automatically.
(automatic buzzer mute function)
■ Adjusting the buzzer volume
The buzzer volume of the intuitive parking
assist, and RCTA can all be changed at
once from the customize settings.
(P.468)
■ Muting a buzzer
When the temporary mute switch is dis-
played on the Center Display, this switch
can be pressed to temporarily mute the
buzzer.
Select the switch to mute a buzzer of the
intuitive parking assist and RCTA all
together.
● Mute will be automatically canceled in
the following situations:
• When the shift position is changed.
• When the vehicle speed exceeds a cer-
tain speed.
• When there is a malfunction in a sensor
2784-5. Using the driving support systemsA Center DisplayRCTA (Rear Cross TrafficAlert) functionTurning the RCTA function on/off in Cen-ter DisplayIf a vehicle approaching from the right orThe RCTA function uses the BSMleft at the rear of the vehicle is detected,rear side radar sensors installedthe RCTA icon (P.279) for the detectedbehind the rear bumper. This func-side will be displayed on the Center Dis-tion is intended to assist the driverplay. This illustration * shows an example ofin checking areas that are not easilya vehicle approaching from both sides ofvisible when backing vehicle.* : Depending on the vehicle grade andWARNINGequipped options, the actual screen may■ Cautions regarding the use of thebe different from this Outside rear view mirror indicatorsThe driver is solely responsible for safedriving. Always drive safely, taking careIf a vehicle is detected as approachingto observe your the left or right behind the vehicle,The RCTA function is only a supplemen-both outside rear view mirror indicatorstary function which alerts the driver that a(P.81) will blink and a buzzer will is approaching from the right orleft at the rear of the vehicle.C Driving assist information indicatorAs the RCTA function may not functionIlluminates when the RCTA is turned under certain conditions, theAt this time, a message will be displayed ondriver’s own visual confirmation of safetythe multi-information reliance on this function may leadTurning the RCTA functionto an accident resulting death or To ensure the system can operateThe RCTA can be enabled/disabledproperlyP.265through a customize setting.(P.468)System componentsWhen the RCTA function is off, thedriving assist information indicator(P.81) will illuminate and a messagewill be displayed on the multi-informa-tion display. Each time the powerswitch is turned to ON, the RCTAfunction is enabled.■ O
278
4-5. Using the driving support systems
A Center Display
RCTA (Rear Cross Traffic
Alert) function
Turning the RCTA function on/off in Cen-
ter Display
If a vehicle approaching from the right or
The RCTA function uses the BSM
left at the rear of the vehicle is detected,
rear side radar sensors installed
the RCTA icon (P.279) for the detected
behind the rear bumper. This func-
side will be displayed on the Center Dis-
tion is intended to assist the driver
play. This illustration * shows an example of
in checking areas that are not easily
a vehicle approaching from both sides of
visible when backing up.
the vehicle.
* : Depending on the vehicle grade and
WARNING
equipped options, the actual screen may
■ Cautions regarding the use of the
be different from this illustration.
system
B Outside rear view mirror indicators
The driver is solely responsible for safe
driving. Always drive safely, taking care
If a vehicle is detected as approaching
to observe your surroundings.
from the left or right behind the vehicle,
The RCTA function is only a supplemen-
both outside rear view mirror indicators
tary function which alerts the driver that a
(P.81) will blink and a buzzer will sound.
vehicle is approaching from the right or
left at the rear of the vehicle.
C Driving assist information indicator
As the RCTA function may not function
Illuminates when the RCTA is turned off.
correctly under certain conditions, the
At this time, a message will be displayed on
driver’s own visual confirmation of safety
the multi-information display.
is necessary.
Over reliance on this function may lead
Turning the RCTA function
to an accident resulting death or serious
injury.
on/off
■ To ensure the system can operate
The RCTA can be enabled/disabled
properly
P.265
through a customize setting.
(P.468)
System components
When the RCTA function is off, the
driving assist information indicator
(P.81) will illuminate and a message
will be displayed on the multi-informa-
tion display. Each time the power
switch is turned to ON, the RCTA
function is enabled.
■ Outside rear view mirror indicator visi-
bility
In strong sunlight, the outside rear view mir-
2794-5. Using the driving support systemsror indicator may be difficult to see.■ Hearing the RCTA buzzerThe RCTA buzzer may be difficult to hearover loud noises, such as if the audio systemvolume is high.■ Rear side radar sensorsP.265RCTA function■ RCTA function detection areas■ Operation of the RCTA functionThe areas that vehicles can beThe RCTA function uses rear sidedetected in are outlined sensors to detect vehiclesapproaching from the right or left atthe rear of the vehicle and alerts thedriver of the presence of such vehicles4by flashing the outside rear view mirrorindicators and sounding a buzzer can alert the driver offaster vehicles approaching from far-ther :Approaching vehi-A Approximatecle speedalert distanceA Approaching vehicles34 mph (56 km/h)B Detection areas of approaching98 ft. (30 m)(fast)vehicles5 mph (8 km/h)■ RCTA icon display13 ft. (4 m)(slow)When a vehicle approaching from theright or left at the rear of the vehicle is■ The RCTA function is operational whendetected, the following will be dis-The RCTA function operates when all of theplayed on the Center conditions are met: Example (Lexus parking assist mon-● The power switch is in ): Vehicles are approaching● The RCTA function is both sides of the vehicle● The shift position is in R.● The vehicle speed is less than approxi-
279
4-5. Using the driving support systems
ror indicator may be difficult to see.
■ Hearing the RCTA buzzer
The RCTA buzzer may be difficult to hear
over loud noises, such as if the audio system
volume is high.
■ Rear side radar sensors
P.265
RCTA function
■ RCTA function detection areas
■ Operation of the RCTA function
The areas that vehicles can be
The RCTA function uses rear side
detected in are outlined below.
radar sensors to detect vehicles
approaching from the right or left at
the rear of the vehicle and alerts the
driver of the presence of such vehicles
4
by flashing the outside rear view mirror
indicators and sounding a buzzer.
Driving
The buzzer can alert the driver of
faster vehicles approaching from far-
ther away.
Example:
Approaching vehi-
A Approximate
cle speed
alert distance
A Approaching vehicles
34 mph (56 km/h)
B Detection areas of approaching
98 ft. (30 m)
(fast)
vehicles
5 mph (8 km/h)
■ RCTA icon display
13 ft. (4 m)
(slow)
When a vehicle approaching from the
right or left at the rear of the vehicle is
■ The RCTA function is operational when
detected, the following will be dis-
The RCTA function operates when all of the
played on the Center Display.
following conditions are met:
 Example (Lexus parking assist mon-
● The power switch is in ON.
itor): Vehicles are approaching
● The RCTA function is on.
from both sides of the vehicle
● The shift position is in R.
● The vehicle speed is less than approxi-
2804-5. Using the driving support systemsmately 9 mph (15 km/h).● Guardrails, walls, signs, parked vehiclesand similar stationary objects *● The approaching vehicle speed isbetween approximately 5 mph (8 km/h)● Small motorcycles, bicycles, pedestrians,and 34 mph (56 km/h).etc. *■ Setting the buzzer volume● Vehicles moving away from your vehicleThe buzzer volume of the RCTA and intui-● Vehicles approaching from the parkingtive parking assist can be adjusted allspaces next to your vehicle *together through a customize setting.(P.468)● The distance between the sensor andapproaching vehicle gets too close■ Muting a buzzer temporarily*: Depending on the conditions, detectionWhen an object is detected, the temporaryof a vehicle and/or object may switch is displayed on the Center Dis-play.■ Situations in which the system may notSelect the switch to mute the buzzer of theoperate properlyintuitive parking assist and RCTA allThe RCTA function may not detect in the following situations:Mute will be canceled automatically in the● When the sensor is misaligned due to afollowing situations:strong impact to the sensor or its sur-● When the shift position is area.● When the vehicle speed exceeds a cer-● When mud, snow, ice, a sticker, etc., istain the sensor or surrounding areaon the position above the rear bumper.● When there is a malfunction in a sensoror the system is temporarily unavailable.● When driving on a road surface that iswet with standing water during bad● When the operating function is disabledweather, such as heavy rain, snow, or .● When multiple vehicles are approaching● When the power switch is turned only a small gap between each vehi-■ Conditions under which the system detect a vehicle● When a vehicle is approaching at highThe RCTA function is not designed the following types of vehicles● When equipment that may obstruct aand/or objects:sensor is
280
4-5. Using the driving support systems
mately 9 mph (15 km/h).
● Guardrails, walls, signs, parked vehicles
and similar stationary objects *
● The approaching vehicle speed is
between approximately 5 mph (8 km/h)
● Small motorcycles, bicycles, pedestrians,
and 34 mph (56 km/h).
etc. *
■ Setting the buzzer volume
● Vehicles moving away from your vehicle
The buzzer volume of the RCTA and intui-
● Vehicles approaching from the parking
tive parking assist can be adjusted all
spaces next to your vehicle *
together through a customize setting.
(P.468)
● The distance between the sensor and
approaching vehicle gets too close
■ Muting a buzzer temporarily
*
: Depending on the conditions, detection
When an object is detected, the temporary
of a vehicle and/or object may occur.
mute switch is displayed on the Center Dis-
play.
■ Situations in which the system may not
Select the switch to mute the buzzer of the
operate properly
intuitive parking assist and RCTA all
The RCTA function may not detect vehicles
together.
correctly in the following situations:
Mute will be canceled automatically in the
● When the sensor is misaligned due to a
following situations:
strong impact to the sensor or its sur-
● When the shift position is changed.
rounding area.
● When the vehicle speed exceeds a cer-
● When mud, snow, ice, a sticker, etc., is
tain speed.
covering the sensor or surrounding area
on the position above the rear bumper.
● When there is a malfunction in a sensor
or the system is temporarily unavailable.
● When driving on a road surface that is
wet with standing water during bad
● When the operating function is disabled
weather, such as heavy rain, snow, or fog.
manually.
● When multiple vehicles are approaching
● When the power switch is turned off.
with only a small gap between each vehi-
■ Conditions under which the system will
cle.
not detect a vehicle
● When a vehicle is approaching at high
The RCTA function is not designed to
speed.
detect the following types of vehicles
● When equipment that may obstruct a
and/or objects:
sensor is installed, such as a towing eye-
● Vehicles approaching from directly
let, bumper protector (an additional trim
behind
strip, etc.), bicycle carrier, or snow plow.
● Vehicles backing up in a parking space
● When backing up on a slope with a sharp
next to your vehicle
change in grade.
● Vehicles that the sensors cannot detect
due to obstructions
2814-5. Using the driving support systems● When a vehicle turns into the detectionarea.● When backing out of a sharp angle park-ing spot.4■ Situations in which the system mayoperate even if there is no possibility of acollisionDrivingInstances of the RCTA function unneces-sary detecting a vehicle and/or object mayincrease in the following situations:● When the parking space faces a streetand vehicles are being driven on the● Immediately after the RCTA function on● Immediately after the hybrid system isstarted with the RCTA function on● When the sensors cannot detect a vehi-cle due to obstructions● When towing with the vehicle● When there is a significant difference inheight between your vehicle and thevehicle that enters the detection area.● When the distance between your vehicle● When a sensor or the area around a sen-and metal objects, such as a guardrail,sor is extremely hot or , sign, or parked vehicle, which may● If the suspension has been modified orreflect electrical waves toward the rear oftires of a size other than specified arethe vehicle, is .● If the front of the vehicle is raised or low-ered due to the carried load.● When turning while backing up.
281
4-5. Using the driving support systems
● When a vehicle turns into the detection
area.
● When backing out of a sharp angle park-
ing spot.
4
■ Situations in which the system may
operate even if there is no possibility of a
collision
Driving
Instances of the RCTA function unneces-
sary detecting a vehicle and/or object may
increase in the following situations:
● When the parking space faces a street
and vehicles are being driven on the
● Immediately after the RCTA function is
street.
turned on
● Immediately after the hybrid system is
started with the RCTA function on
● When the sensors cannot detect a vehi-
cle due to obstructions
● When towing with the vehicle
● When there is a significant difference in
height between your vehicle and the
vehicle that enters the detection area.
● When the distance between your vehicle
● When a sensor or the area around a sen-
and metal objects, such as a guardrail,
sor is extremely hot or cold.
wall, sign, or parked vehicle, which may
● If the suspension has been modified or
reflect electrical waves toward the rear of
tires of a size other than specified are
the vehicle, is short.
installed.
● If the front of the vehicle is raised or low-
ered due to the carried load.
● When turning while backing up.
2824-5. Using the driving support systems● When equipment that may obstruct aPKSB (Parking Supportsensor is installed, such as a towing eye-Brake) *let, bumper protector (an additional trimstrip, etc.), bicycle carrier, or snow plow.* : If equipped● When a vehicle passes by the side of PKSB (Parking Support Brake)is a system that issues warnings andautomatically performs braking tohelp reduce collision damage withoperation targets that weredetected when traveling at a lowspeed such as when parking.● When a detected vehicle turns whileapproaching the (Parking Support Brake)systemThe system has detected the followingas operation targets. (The operationtargets vary depending on the func-tion.) Parking Support Brake function● When there are spinning objects near(static objects front and rear of theyour vehicle such as the fan of an air con-vehicle):P.286ditioning unit.● When water is splashed or sprayed Parking Support Brake functiontoward the rear bumper, such as from a(moving vehicles rear of the ):P.289● Moving objects (flags, exhaust fumes,large rain droplets or snowflakes, rainWARNINGwater on the road surface, etc.).● When the distance between your vehicle■ Cautions regarding the use of theand a guardrail, wall, etc., that enters thesystemdetection area is not overly rely on the system, as● Gratings and so may lead to an accident.● When a sensor or the area around a sen-Always drive while checking the safety ofsor is extremely hot or surroundings of the vehicle.● If the suspension has been modified orDepending on the vehicle and road con-tires of a size other than specified areditions, weather, etc., the system may .● If the front of the vehicle is raised or low-The detection capabilities of sensors andered due to the carried are limited. Always drive whilechecking the safety of the surroundings● When towing with the the vehicle.
282
4-5. Using the driving support systems
● When equipment that may obstruct a
PKSB (Parking Support
sensor is installed, such as a towing eye-
Brake) *
let, bumper protector (an additional trim
strip, etc.), bicycle carrier, or snow plow.
* : If equipped
● When a vehicle passes by the side of your
vehicle.
The PKSB (Parking Support Brake)
is a system that issues warnings and
automatically performs braking to
help reduce collision damage with
operation targets that were
detected when traveling at a low
speed such as when parking.
● When a detected vehicle turns while
approaching the vehicle.
PKSB (Parking Support Brake)
system
The system has detected the following
as operation targets. (The operation
targets vary depending on the func-
tion.)
 Parking Support Brake function
● When there are spinning objects near
(static objects front and rear of the
your vehicle such as the fan of an air con-
vehicle):P.286
ditioning unit.
● When water is splashed or sprayed
 Parking Support Brake function
toward the rear bumper, such as from a
(moving vehicles rear of the vehi-
sprinkler.
cle):P.289
● Moving objects (flags, exhaust fumes,
large rain droplets or snowflakes, rain
WARNING
water on the road surface, etc.).
● When the distance between your vehicle
■ Cautions regarding the use of the
and a guardrail, wall, etc., that enters the
system
detection area is short.
Do not overly rely on the system, as
● Gratings and gutters.
doing so may lead to an accident.
● When a sensor or the area around a sen-
Always drive while checking the safety of
sor is extremely hot or cold.
the surroundings of the vehicle.
● If the suspension has been modified or
Depending on the vehicle and road con-
tires of a size other than specified are
ditions, weather, etc., the system may not
installed.
operate.
● If the front of the vehicle is raised or low-
The detection capabilities of sensors and
ered due to the carried load.
radars are limited. Always drive while
checking the safety of the surroundings
● When towing with the vehicle.
of the vehicle.
2834-5. Using the driving support systems● If the vehicle cannot be driven in a sta-WARNINGble manner, such as when the vehicle● The driver is solely responsible for safehas been in an accident or is malfunc-driving. Always drive carefully, to observe your Parking Support Brake system is● When the vehicle is driven in a sportydesigned to provide support to lessenmanner or severity of collisions. However, it● When the tires are not properlymay not operate in some .● The Parking Support Brake system is● When the tires are very designed to stop the vehicle com-pletely. Additionally, even if the system● When tire chains, a compact spare tirehas stopped the vehicle, it is necessaryor an emergency tire puncture repairto depress the brake pedal immedi-kit are as brake control will be canceledafter approximately 2 seconds.● When towing with the vehicle● It is extremely dangerous to check the■ Precautions for the suspensionsystem operations by intentionallyDo not modify the suspension of thedriving the vehicle into the direction of4vehicle. If the height or tilt of the vehicle isa wall, etc. Never attempt such , the sensors may not be able to■ When to disable the Parking Supportdetect detectable objects and the systemDrivingBrakemay not operate correctly, possibly lead-ing to an the following situations, disable theParking Support Brake as the systemmay operate even though there is noEnabling/Disabling the Parkingpossibility of a Brake● When inspecting the vehicle using achassis roller, chassis dynamo or freeThe Parking Support Brake be enabled/disabled through a● When loading the vehicle onto a boat,customize setting. (P.468)truck or other transport the PKSB (Parking Support● If the suspension has been modified ortires of a size other than specified areBrake) is disabled, the driving
283
4-5. Using the driving support systems
● If the vehicle cannot be driven in a sta-
WARNING
ble manner, such as when the vehicle
● The driver is solely responsible for safe
has been in an accident or is malfunc-
driving. Always drive carefully, taking
tioning.
care to observe your surroundings.
The Parking Support Brake system is
● When the vehicle is driven in a sporty
designed to provide support to lessen
manner or off-road.
the severity of collisions. However, it
● When the tires are not properly
may not operate in some situations.
inflated.
● The Parking Support Brake system is
● When the tires are very worn.
not designed to stop the vehicle com-
pletely. Additionally, even if the system
● When tire chains, a compact spare tire
has stopped the vehicle, it is necessary
or an emergency tire puncture repair
to depress the brake pedal immedi-
kit are used.
ately as brake control will be canceled
after approximately 2 seconds.
● When towing with the vehicle
● It is extremely dangerous to check the
■ Precautions for the suspension
system operations by intentionally
Do not modify the suspension of the
driving the vehicle into the direction of
4
vehicle. If the height or tilt of the vehicle is
a wall, etc. Never attempt such actions.
changed, the sensors may not be able to
■ When to disable the Parking Support
detect detectable objects and the system
Driving
Brake
may not operate correctly, possibly lead-
ing to an accident.
In the following situations, disable the
Parking Support Brake as the system
may operate even though there is no
Enabling/Disabling the Parking
possibility of a collision.
Support Brake
● When inspecting the vehicle using a
chassis roller, chassis dynamo or free
The Parking Support Brake function
roller.
can be enabled/disabled through a
● When loading the vehicle onto a boat,
customize setting. (P.468)
truck or other transport vessel.
When the PKSB (Parking Support
● If the suspension has been modified or
tires of a size other than specified are
Brake) is disabled, the driving assist
installed.
information indicator (P.81) illumi-
● If the front of the vehicle is raised or
nates, and a message is displayed on
lowered due to the carried load.
the multi-information display.
● When equipment such as a towing
If the system switches to OFF (dis-
hook, transport hook, bumper protec-
abled) and the PKSB (Parking Support
tor, bumper trim, bicycle carrier or
snow-removal device (snow plow) is
Brake) is stopped, the PKSB (Parking
installed near the sensor.
Support Brake) will not be re-enabled
until ON (enabled) is selected again
● When using automatic car washing
devices.
from the customize setting (P.468).
(It remains off even if the power switch
is turned to ON again after the power
2844-5. Using the driving support systemsswitch has been turned off.)Driving assist information indicator: NotilluminatedBuzzer: Short beepDisplay and buzzer for hybrid Vehicle stopped by system opera-system output restriction controltionand brake controlThe vehicle has been stopped by brakeIf the hybrid system output restriction con-control or brake control operates, a buzzerMulti-information display: “Acceleratorwill sound and a message will be displayedPedal is Pressed Press Brake Pedal” (If theon the Center Display and multi-informa-accelerator pedal is not depressed, “Presstion display, to alert the Pedal” will be displayed.)Depending on the situation, output restric-Driving assist information indicator: Illumi-tion control operates to either limit accel-natederation or restrict output as much : Sounds repeatedly Hybrid system output restrictioncontrol is operating (accelerationSystem overviewrestriction)If the Parking Support Brake deter-Acceleration greater than a certainmines that a collision with a detectedamount is restricted by the is possible, the hybrid systemMulti-information display: “Objectoutput will be restricted to restrain anyDetected Acceleration Reduced”increase in the vehicle speed. (HybridDriving assist information indicator: Notsystem output restriction control: Seeilluminatedfigure 2 below.)Buzzer: Does not soundAdditionally, if the accelerator pedal Hybrid system output restrictioncontinues to be depressed, the brakescontrol is operating (outputwill be applied automatically to reducerestricted as much as possible)the vehicle speed. (Brake control: Seefigure 3.)The system has determined that stronger-than-normal brake operation is necessary. Figure 1 When the PKSB (ParkingSupport Brake) is not operatingMulti-information display: “BRAKE!”Driving assist information indicator: NotilluminatedBuzzer: Short beep Brake control is operatingThe system determined that emergencybraking is
284
4-5. Using the driving support systems
switch has been turned off.)
Driving assist information indicator: Not
illuminated
Buzzer: Short beep
Display and buzzer for hybrid
 Vehicle stopped by system opera-
system output restriction control
tion
and brake control
The vehicle has been stopped by brake
If the hybrid system output restriction con-
control operation.
trol or brake control operates, a buzzer
Multi-information display: “Accelerator
will sound and a message will be displayed
Pedal is Pressed Press Brake Pedal” (If the
on the Center Display and multi-informa-
accelerator pedal is not depressed, “Press
tion display, to alert the driver.
Brake Pedal” will be displayed.)
Depending on the situation, output restric-
Driving assist information indicator: Illumi-
tion control operates to either limit accel-
nated
eration or restrict output as much as
possible.
Buzzer: Sounds repeatedly
 Hybrid system output restriction
control is operating (acceleration
System overview
restriction)
If the Parking Support Brake deter-
Acceleration greater than a certain
mines that a collision with a detected
amount is restricted by the system.
object is possible, the hybrid system
Multi-information display: “Object
output will be restricted to restrain any
Detected Acceleration Reduced”
increase in the vehicle speed. (Hybrid
Driving assist information indicator: Not
system output restriction control: See
illuminated
figure 2 below.)
Buzzer: Does not sound
Additionally, if the accelerator pedal
 Hybrid system output restriction
continues to be depressed, the brakes
control is operating (output
will be applied automatically to reduce
restricted as much as possible)
the vehicle speed. (Brake control: See
figure 3.)
The system has determined that stronger-
than-normal brake operation is necessary.
 Figure 1 When the PKSB (Parking
Support Brake) is not operating
Multi-information display: “BRAKE!”
Driving assist information indicator: Not
illuminated
Buzzer: Short beep
 Brake control is operating
The system determined that emergency
braking is necessary.
Multi-information display: “BRAKE!”
2854-5. Using the driving support systemsA Hybrid system outputD Hybrid system output restrictioncontrol begins operating (SystemB Braking forcedetermines that possibility of colli-C Timesion with detected object is high) Figure 2: When hybrid system out-E Brake control begins operatingput restriction control operates(System determines that possibilityof collision with detected object isextremely high)■ If the Parking Support Brake has oper-atedIf the vehicle is stopped due to operation ofthe Parking Support Brake, the ParkingSupport Brake will be disabled and the driv-ing assist information indicator will illumi-nate. In addition, even when the PKSB4(Parking Support Brake) operates, theA Hybrid system outputbrake control is canceled after approxi-mately 2 seconds to start off. Furthermore,B Braking forceDrivingthe brake control also can be canceled bydepressing the brake pedal. Depressing theC Timeaccelerator pedal again after that allows theD Hybrid system output restrictionvehicle to start begins operating (System■ Re-enabling the Parking Support Brakedetermines that possibility of colli-To re-enable the Parking Support Brakewhen it is disabled due to operation of thesion with detected object is high)PKSB (Parking Support Brake), either Figure 3: When hybrid system out-enable the system again, or turn the powerswitch off and then back to restriction control and brakeAdditionally, if any of the following condi-control operatestions are met, the system will be re-enabledautomatically and the driving assist informa-tion indicator will turn off (P.81):● The P shift position is selected● Drive with no operation targets in thetraveling direction of the vehicle● Change the traveling direction of thevehicle■ BuzzerRegardless of whether the intuitive parkingassist is enabled or not (P.273), if theA Hybrid system outputPKSB (Parking Support Brake) system isenabled (P.283), the buzzer will soundB Braking forceto notify the driver of the approximate d
285
4-5. Using the driving support systems
A Hybrid system output
D Hybrid system output restriction
control begins operating (System
B Braking force
determines that possibility of colli-
C Time
sion with detected object is high)
 Figure 2: When hybrid system out-
E Brake control begins operating
put restriction control operates
(System determines that possibility
of collision with detected object is
extremely high)
■ If the Parking Support Brake has oper-
ated
If the vehicle is stopped due to operation of
the Parking Support Brake, the Parking
Support Brake will be disabled and the driv-
ing assist information indicator will illumi-
nate. In addition, even when the PKSB
4
(Parking Support Brake) operates, the
A Hybrid system output
brake control is canceled after approxi-
mately 2 seconds to start off. Furthermore,
B Braking force
Driving
the brake control also can be canceled by
depressing the brake pedal. Depressing the
C Time
accelerator pedal again after that allows the
D Hybrid system output restriction
vehicle to start off.
control begins operating (System
■ Re-enabling the Parking Support Brake
determines that possibility of colli-
To re-enable the Parking Support Brake
when it is disabled due to operation of the
sion with detected object is high)
PKSB (Parking Support Brake), either
 Figure 3: When hybrid system out-
enable the system again, or turn the power
switch off and then back to ON.
put restriction control and brake
Additionally, if any of the following condi-
control operates
tions are met, the system will be re-enabled
automatically and the driving assist informa-
tion indicator will turn off (P.81):
● The P shift position is selected
● Drive with no operation targets in the
traveling direction of the vehicle
● Change the traveling direction of the
vehicle
■ Buzzer
Regardless of whether the intuitive parking
assist is enabled or not (P.273), if the
A Hybrid system output
PKSB (Parking Support Brake) system is
enabled (P.283), the buzzer will sound
B Braking force
to notify the driver of the approximate dis-
tance to the object when the brake control
C Time
and the hybrid system output restriction
2864-5. Using the driving support systemscontrol are Support Brakefunction (static objects frontand rear of the vehicle) **: If equippedIf the sensors detect a static object,such as a wall, in the traveling direc-tion of the vehicle and the systemdetermines that a collision mayoccur due to the vehicle suddenlymoving forward due to an acciden-tal accelerator pedal operation, thevehicle moving the unintendeddirection due to the wrong shiftposition being selected, or whileparking or traveling at low speeds,the system will operate to lessenthe impact with the detected staticobject and reduce the of function operation(static objects front and rear ofthe vehicle)This function will operate in situationssuch as the following if an object isdetected in the traveling direction ofthe vehicle.
286
4-5. Using the driving support systems
control are operated.
Parking Support Brake
function (static objects front
and rear of the vehicle) *
*
: If equipped
If the sensors detect a static object,
such as a wall, in the traveling direc-
tion of the vehicle and the system
determines that a collision may
occur due to the vehicle suddenly
moving forward due to an acciden-
tal accelerator pedal operation, the
vehicle moving the unintended
direction due to the wrong shift
position being selected, or while
parking or traveling at low speeds,
the system will operate to lessen
the impact with the detected static
object and reduce the resulting
damage.
Examples of function operation
(static objects front and rear of
the vehicle)
This function will operate in situations
such as the following if an object is
detected in the traveling direction of
the vehicle.
2874-5. Using the driving support systems■ When traveling at a low speed and■ When the vehicle moves forwardthe brake pedal is not depressed,due to the incorrect shift positionor is depressed latebeing selected4■ When the accelerator pedal isTypes of sensorsdepressed excessivelyDrivingP.272WARNING■ To ensure the system can operateproperlyP.265■ If the Parking Support Brake functionoperates unnecessarily, such as at arailroad crossingP.285■ Notes when washing the vehicleP.274■ The Parking Support Brake function(static objects front and rear of the vehi-cle) will operate whenThe function will operate when the drivingassist information indicator is not illumi-nated (P.79, 81) and all of the followingconditions are met:● Hybrid system output restriction control• The Parking Support Brake is enabled.• The vehicle speed is approximately 9mph (15 km/h) or less.
287
4-5. Using the driving support systems
■ When traveling at a low speed and
■ When the vehicle moves forward
the brake pedal is not depressed,
due to the incorrect shift position
or is depressed late
being selected
4
■ When the accelerator pedal is
Types of sensors
depressed excessively
Driving
P.272
WARNING
■ To ensure the system can operate
properly
P.265
■ If the Parking Support Brake function
operates unnecessarily, such as at a
railroad crossing
P.285
■ Notes when washing the vehicle
P.274
■ The Parking Support Brake function
(static objects front and rear of the vehi-
cle) will operate when
The function will operate when the driving
assist information indicator is not illumi-
nated (P.79, 81) and all of the following
conditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is enabled.
• The vehicle speed is approximately 9
mph (15 km/h) or less.
2884-5. Using the driving support systems• There is a static object in the traveling■ Situations in which the system may notdirection of the vehicle and approxi-operate properlymately 6 to 13 ft. (2 to 4 m) away.P.274• The Parking Support Brake determines■ Situations in which the system maythat a stronger-than-normal brake oper-operate even if there is no possibility of aation is necessary to avoid a ● Brake controlP.275• Hybrid system output restriction controlis operating.• The Parking Support Brake determinesthat an immediate brake operation isnecessary to avoid a collision.■ The Parking Support Brake function(static objects front and rear of the vehi-cle) will stop operating whenThe function will stop operating if any of thefollowing conditions are met:● Hybrid system output restriction control• The Parking Support Brake is disabled.• The system determines that the collisionhas become avoidable with normal brakeoperation.• The static object is no longer approxi-mately 6 to 13 ft. (2 to 4 m) away from thevehicle or in the traveling direction of thevehicle.● Brake control• The Parking Support Brake is disabled.• Approximately 2 seconds have elapsedsince the vehicle was stopped by brakecontrol.• The brake pedal is depressed after thevehicle is stopped by brake control.• The static object is no longer approxi-mately 6 to 13 ft. (2 to 4 m) away from thevehicle or in the traveling direction of thevehicle.■ Detection range of the Parking SupportBrake function (static objects front andrear of the vehicle)The detection range of the Parking SupportBrake function (static objects front and rearof the vehicle) differs from the detectionrange of the intuitive parking assist.(P.276) Therefore, even if the intuitiveparking assist detects an object and pro-vides a warning, the Parking Support Brakefunction (static objects front and rear of thevehicle) may not start operating.
288
4-5. Using the driving support systems
• There is a static object in the traveling
■ Situations in which the system may not
direction of the vehicle and approxi-
operate properly
mately 6 to 13 ft. (2 to 4 m) away.
P.274
• The Parking Support Brake determines
■ Situations in which the system may
that a stronger-than-normal brake oper-
operate even if there is no possibility of a
ation is necessary to avoid a collision.
collision
● Brake control
P.275
• Hybrid system output restriction control
is operating.
• The Parking Support Brake determines
that an immediate brake operation is
necessary to avoid a collision.
■ The Parking Support Brake function
(static objects front and rear of the vehi-
cle) will stop operating when
The function will stop operating if any of the
following conditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is disabled.
• The system determines that the collision
has become avoidable with normal brake
operation.
• The static object is no longer approxi-
mately 6 to 13 ft. (2 to 4 m) away from the
vehicle or in the traveling direction of the
vehicle.
● Brake control
• The Parking Support Brake is disabled.
• Approximately 2 seconds have elapsed
since the vehicle was stopped by brake
control.
• The brake pedal is depressed after the
vehicle is stopped by brake control.
• The static object is no longer approxi-
mately 6 to 13 ft. (2 to 4 m) away from the
vehicle or in the traveling direction of the
vehicle.
■ Detection range of the Parking Support
Brake function (static objects front and
rear of the vehicle)
The detection range of the Parking Support
Brake function (static objects front and rear
of the vehicle) differs from the detection
range of the intuitive parking assist.
(P.276) Therefore, even if the intuitive
parking assist detects an object and pro-
vides a warning, the Parking Support Brake
function (static objects front and rear of the
vehicle) may not start operating.
2894-5. Using the driving support systemsParking Support BrakeWARNINGfunction (moving vehicles■ To ensure the system can operaterear of the vehicle) *properlyP.265*: If equippedIf a rear radar sensor detects a■ The Parking Support Brake function(moving vehicles rear of the vehicle) willvehicle approaching from the rightoperate whenor left at the rear of the vehicle andThe function will operate when the drivingthe system determines that the pos-assist information indicator is not illumi-sibility of a collision is high, thisnated (P.79, 81) and all of the followingconditions are met:function will perform brake controlto reduce the likelihood of an● Hybrid system output restriction control• The Parking Support Brake is with the approaching vehi-• The vehicle speed is approximately 9cle.mph (15 km/h) or less.• Vehicles are approaching from the right4or left at the rear of the vehicle at a travel-Examples of the function opera-ing speed of approximately 5 mph (8km/h) or • The shift position is in R.• The Parking Support Brake determinesThis function will operate in situationsthat a stronger than normal brake opera-such as the following if a vehicle istion is necessary to avoid a collision withan approaching in the traveling direction of● Brake controlthe vehicle.• Hybrid system output restriction controlis operating.■ When reversing, a vehicle is• The Parking Support Brake determinesapproaching and the brake pedal isthat a stronger than normal brake opera-not depressed, or is depressed latetion is necessary to avoid a collision withan approaching vehicle.■ The Parking Support Brake function(moving vehicles rear of the vehicle) willstop operating whenThe function will stop operating if any of thefollowing conditions are met:● Hybrid system output restriction control• The Parking Support Brake is disabled.• The collision becomes avoidable withnormal brake operation.• A vehicle is no longer approaching fromthe right or left
289
4-5. Using the driving support systems
Parking Support Brake
WARNING
function (moving vehicles
■ To ensure the system can operate
rear of the vehicle) *
properly
P.265
*
: If equipped
If a rear radar sensor detects a
■ The Parking Support Brake function
(moving vehicles rear of the vehicle) will
vehicle approaching from the right
operate when
or left at the rear of the vehicle and
The function will operate when the driving
the system determines that the pos-
assist information indicator is not illumi-
sibility of a collision is high, this
nated (P.79, 81) and all of the following
conditions are met:
function will perform brake control
to reduce the likelihood of an
● Hybrid system output restriction control
• The Parking Support Brake is enabled.
impact with the approaching vehi-
• The vehicle speed is approximately 9
cle.
mph (15 km/h) or less.
• Vehicles are approaching from the right
4
or left at the rear of the vehicle at a travel-
Examples of the function opera-
ing speed of approximately 5 mph (8
km/h) or more.
tion
Driving
• The shift position is in R.
• The Parking Support Brake determines
This function will operate in situations
that a stronger than normal brake opera-
such as the following if a vehicle is
tion is necessary to avoid a collision with
an approaching vehicle.
detected in the traveling direction of
● Brake control
the vehicle.
• Hybrid system output restriction control
is operating.
■ When reversing, a vehicle is
• The Parking Support Brake determines
approaching and the brake pedal is
that a stronger than normal brake opera-
not depressed, or is depressed late
tion is necessary to avoid a collision with
an approaching vehicle.
■ The Parking Support Brake function
(moving vehicles rear of the vehicle) will
stop operating when
The function will stop operating if any of the
following conditions are met:
● Hybrid system output restriction control
• The Parking Support Brake is disabled.
• The collision becomes avoidable with
normal brake operation.
• A vehicle is no longer approaching from
the right or left at the rear of the vehicle.
Types of sensors
● Brake control
• The Parking Support Brake is disabled.
P.265
• Approximately 2 seconds have elapsed
since the vehicle was stopped by brake
control.
2904-5. Using the driving support systems• The brake pedal is depressed after theDriving mode select switchvehicle is stopped by brake control.• A vehicle is no longer approaching fromthe right or left at the rear of the driving modes can be selected■ Situations in which the system may notto suit driving properlyP.280Selecting the driving mode■ Situations in which the system mayoperate even if there is no possibility of a Vehicles without Adaptive VariablecollisionP.281Suspension system1 Normal modeProvides an optimal balance of fuel econ-omy, quietness, and dynamic for city the switch to change the drivingmode to Normal mode when not in Nor-mal mode.2 Eco drive modeHelps the driver accelerate in an eco-friendly manner and improve fuel economythrough moderate throttle characteristicsand by controlling the operation of the airconditioning system (heating/cooling).When not in Eco drive mode, if the drivingmode select switch is turned toward you,the Eco drive mode indicator comes on.3 Sport modeAssists acceleration response by con-
290
4-5. Using the driving support systems
• The brake pedal is depressed after the
Driving mode select switch
vehicle is stopped by brake control.
• A vehicle is no longer approaching from
the right or left at the rear of the vehicle.
The driving modes can be selected
■ Situations in which the system may not
to suit driving conditions.
operate properly
P.280
Selecting the driving mode
■ Situations in which the system may
operate even if there is no possibility of a
 Vehicles without Adaptive Variable
collision
P.281
Suspension system
1 Normal mode
Provides an optimal balance of fuel econ-
omy, quietness, and dynamic performance.
Suitable for city driving.
Press the switch to change the driving
mode to Normal mode when not in Nor-
mal mode.
2 Eco drive mode
Helps the driver accelerate in an eco-
friendly manner and improve fuel economy
through moderate throttle characteristics
and by controlling the operation of the air
conditioning system (heating/cooling).
When not in Eco drive mode, if the driving
mode select switch is turned toward you,
the Eco drive mode indicator comes on.
3 Sport mode
Assists acceleration response by con-
2914-5. Using the driving support systemstrolling the hybrid system and , steering and air conditioningSuitable for when precise handling is desir-system functions set to your preferred set-able, for example when driving on mode settings can only beWhen not in Sport mode, if the drivingchanged on the drive mode customizationmode select switch is turned backward, thedisplay of Center Display. (P.460)Sport mode indicator comes on and the2 Eco drive modeHybrid System Indicator changes to theHelps the driver accelerate in an eco-tachometer. (P.84, 90)friendly manner and improve fuel economy Vehicles with Adaptive Variablethrough moderate throttle characteristicsSuspension systemand by controlling the operation of the airconditioning system (heating/cooling).When not in Eco drive mode, if the drivingmode select switch is turned toward you,the Eco drive mode indicator comes on.3 Sport mode4• SPORT S modeAssists acceleration response by con-Drivingtrolling the hybrid not in Sport S mode, if the drivingmode select switch is turned away fromyou, the Sport S mode indicator comes onand the Hybrid System Indicator changesto the tachometer. (P.84, 90)• SPORT S+ mode1 Normal mode/Custom modeHelps to ensure superior vehicle stabilityNormal mode and Custom mode areby simultaneously controlling the steeringselected by pressing the driving modeand suspension in addition to the hybridselect switch. Each time the switch issystem. Suitable for sportier , the driving mode changesbetween Normal mode and CustomWhen in SPORT S mode, if the drivingmode. When Custom mode is selected,mode select switch is turned backward, thethe Custom mode indicator comes S+ mode indicator comes the switch to change the drivingmode to Normal mode when not in Nor-■ Operation of the air conditioning sys-mal in Eco drive mode• Normal modeEco drive mode controls the heating/cool-ing operations and fan speed o
291
4-5. Using the driving support systems
trolling the hybrid system and steering.
suspension, steering and air conditioning
Suitable for when precise handling is desir-
system functions set to your preferred set-
able, for example when driving on moun-
tings.
tain roads.
Custom mode settings can only be
When not in Sport mode, if the driving
changed on the drive mode customization
mode select switch is turned backward, the
display of Center Display. (P.460)
Sport mode indicator comes on and the
2 Eco drive mode
Hybrid System Indicator changes to the
Helps the driver accelerate in an eco-
tachometer. (P.84, 90)
friendly manner and improve fuel economy
 Vehicles with Adaptive Variable
through moderate throttle characteristics
Suspension system
and by controlling the operation of the air
conditioning system (heating/cooling).
When not in Eco drive mode, if the driving
mode select switch is turned toward you,
the Eco drive mode indicator comes on.
3 Sport mode
4
• SPORT S mode
Assists acceleration response by con-
Driving
trolling the hybrid system.
When not in Sport S mode, if the driving
mode select switch is turned away from
you, the Sport S mode indicator comes on
and the Hybrid System Indicator changes
to the tachometer. (P.84, 90)
• SPORT S+ mode
1 Normal mode/Custom mode
Helps to ensure superior vehicle stability
Normal mode and Custom mode are
by simultaneously controlling the steering
selected by pressing the driving mode
and suspension in addition to the hybrid
select switch. Each time the switch is
system. Suitable for sportier driving.
pressed, the driving mode changes
between Normal mode and Custom
When in SPORT S mode, if the driving
mode. When Custom mode is selected,
mode select switch is turned backward, the
the Custom mode indicator comes on.
Sport S+ mode indicator comes on.
Press the switch to change the driving
mode to Normal mode when not in Nor-
■ Operation of the air conditioning sys-
mal mode.
tem in Eco drive mode
• Normal mode
Eco drive mode controls the heating/cool-
ing operations and fan speed of the air con-
Provides an optimal balance of fuel econ-
ditioning system to enhance fuel efficiency.
omy, quietness, and dynamic performance.
To improve air conditioning performance,
perform the following operations:
Suitable for city driving.
● Turn off eco air conditioning mode
• Custom mode
(P.311)
Allows you to drive with the power train,
● Adjust the fan speed (P.307, 310)
2924-5. Using the driving support systems● Turn off Eco drive modeDriving assist systems■ Automatic deactivation of Sport modeand Custom mode (if equipped)To keep driving safety and perfor-If the power switch is turned off after drivingmance, the following systems oper-in Sport mode or Custom mode, the drivingmode will be changed to Normal automatically in response to■ Display of the multi-information displayvarious driving situations. Bechanges according to the selected driv-aware, however, that these systemsing modeare supplementary and should notAccording to the selected driving mode,be relied upon too heavily whenthe display of the multi-information displaymay be the vehicle.■ Customization (vehicles with AdaptiveVariable Suspension system)Summary of the driving assistSettings (e.g. custom mode) can besystemschanged. (Customizable fea-tures:P.460)■ ECB (Electronically ControlledBrake System)The electronically controlled systemgenerates braking force correspond-ing to the brake operation■ ABS (Anti-lock Brake System)Helps to prevent wheel lock when thebrakes are applied suddenly, or if thebrakes are applied while driving on aslippery road surface■ Brake assistGenerates an increased level of brak-ing force after the brake pedal isdepressed when the system detects apanic stop situation■ VSC (Vehicle Stability Control)Helps the driver to control skiddingwhen swerving suddenly or turning onslippery road surfaces■ Enhanced VSC (Enhanced Vehi-cle Stability Control)Provides cooperative control of theABS, TRAC, VSC and EPS.
292
4-5. Using the driving support systems
● Turn off Eco drive mode
Driving assist systems
■ Automatic deactivation of Sport mode
and Custom mode (if equipped)
To keep driving safety and perfor-
If the power switch is turned off after driving
mance, the following systems oper-
in Sport mode or Custom mode, the driving
mode will be changed to Normal mode.
ate automatically in response to
■ Display of the multi-information display
various driving situations. Be
changes according to the selected driv-
aware, however, that these systems
ing mode
are supplementary and should not
According to the selected driving mode,
be relied upon too heavily when
the display of the multi-information display
may be changed.
operating the vehicle.
■ Customization (vehicles with Adaptive
Variable Suspension system)
Summary of the driving assist
Settings (e.g. custom mode) can be
systems
changed. (Customizable fea-
tures:P.460)
■ ECB (Electronically Controlled
Brake System)
The electronically controlled system
generates braking force correspond-
ing to the brake operation
■ ABS (Anti-lock Brake System)
Helps to prevent wheel lock when the
brakes are applied suddenly, or if the
brakes are applied while driving on a
slippery road surface
■ Brake assist
Generates an increased level of brak-
ing force after the brake pedal is
depressed when the system detects a
panic stop situation
■ VSC (Vehicle Stability Control)
Helps the driver to control skidding
when swerving suddenly or turning on
slippery road surfaces
■ Enhanced VSC (Enhanced Vehi-
cle Stability Control)
Provides cooperative control of the
ABS, TRAC, VSC and EPS.
2934-5. Using the driving support systemsHelps to maintain directional stabilitydamping force of the shock absorberswhen swerving on slippery road sur-for each of the 4 wheels according tofaces by controlling steering perfor-the road and driving conditions, helps riding comfort with supe-rior vehicle stability, and helps good■ TRAC (Traction Control)vehicle posture. If Sport S+ mode isHelps to maintain drive power andselected using the driving mode selectprevent the drive wheels from spinningswitch, the damping force will becomewhen starting the vehicle or accelerat-more suitable for sporty on slippery roads(P.290)■ Active Cornering Assist (ACA)■ The Secondary Collision BrakeHelps to prevent the vehicle from drift-When the SRS airbag sensor detects aing to the outer side by performingcollision and the system operates, theinner wheel brake control whenbrakes and brake lights are automati-attempting to accelerate while turningcally controlled to reduce the vehicle4■ Hill-start assist controlspeed and help reduce the possibilityof further damage due to a secondaryHelps to reduce the backward of the vehicle when starting on anuphill■ Vehicle Braking Posture Control[Roll Control]■ EPS (Electric Power Steering)Helps to suppress sudden vehicle rollEmploys an electric motor to reducechanges and keep comfortable pos-the amount of effort needed to turn theture by performing rear inner wheelsteering wheelbrake control when starting cornering■ E-Four (Electronic On-DemandAWD system) (AWD models)■ When the TRAC/VSC/ABS systemsAutomatically controls the drive sys-are operatingtem such as to front-wheel drive orThe slip indicator light will flash while theTRAC/VSC/ABS systems are (all wheel drive) according tovarious running conditions includingnormal driving, during cornering, on auphill, when starting off, during accel-eration, on a slippery roads due tosnow or rain, thus contributing to sta-ble operability a
293
4-5. Using the driving support systems
Helps to maintain directional stability
damping force of the shock absorbers
when swerving on slippery road sur-
for each of the 4 wheels according to
faces by controlling steering perfor-
the road and driving conditions, this
mance.
system helps riding comfort with supe-
rior vehicle stability, and helps good
■ TRAC (Traction Control)
vehicle posture. If Sport S+ mode is
Helps to maintain drive power and
selected using the driving mode select
prevent the drive wheels from spinning
switch, the damping force will become
when starting the vehicle or accelerat-
more suitable for sporty driving.
ing on slippery roads
(P.290)
■ Active Cornering Assist (ACA)
■ The Secondary Collision Brake
Helps to prevent the vehicle from drift-
When the SRS airbag sensor detects a
ing to the outer side by performing
collision and the system operates, the
inner wheel brake control when
brakes and brake lights are automati-
attempting to accelerate while turning
cally controlled to reduce the vehicle
4
■ Hill-start assist control
speed and help reduce the possibility
of further damage due to a secondary
Helps to reduce the backward move-
Driving
collision.
ment of the vehicle when starting on an
uphill
■ Vehicle Braking Posture Control
[Roll Control]
■ EPS (Electric Power Steering)
Helps to suppress sudden vehicle roll
Employs an electric motor to reduce
changes and keep comfortable pos-
the amount of effort needed to turn the
ture by performing rear inner wheel
steering wheel
brake control when starting cornering
■ E-Four (Electronic On-Demand
AWD system) (AWD models)
■ When the TRAC/VSC/ABS systems
Automatically controls the drive sys-
are operating
tem such as to front-wheel drive or
The slip indicator light will flash while the
TRAC/VSC/ABS systems are operating.
AWD (all wheel drive) according to
various running conditions including
normal driving, during cornering, on a
uphill, when starting off, during accel-
eration, on a slippery roads due to
snow or rain, thus contributing to sta-
ble operability and driving stability.
■ AVS (Adaptive Variable Suspen-
■ Disabling the TRAC system
sion system) (if equipped)
If the vehicle gets stuck in mud, dirt or snow,
By independently controlling the
the TRAC system may reduce power from
the hybrid system to the wheels. Pressing
2944-5. Using the driving support systemsLexus to turn the system off may■ Operating conditions of hill-start assistmake it easier for you to rock the vehicle incontrolorder to free all of the following conditions areTo turn the TRAC system off, quickly pressmet, the hill-start assist control will operate:and release theswitch.● The shift position is in a position otherthan P or N (when starting off for-The “Traction Control Turned OFF” will beward/backward on an upward incline).shown on the multi-information display.● The vehicle is theswitch again to turn the● The accelerator pedal is not back on.● The parking brake is not engaged.● The power switch is in ON■ Automatic system cancelation of hill-start assist controlThe hill-start assist control will turn off in anyof the following situations:● The shift position is shifted to P or N.● The accelerator pedal is depressed.● The brake pedal is depressed and the■ Turning off both TRAC and VSC sys-parking brake is ● A maximum of 2 seconds have elapsedTo turn the TRAC and VSC systems off,after the brake pedal is releasedpress and hold theswitch for more● The power switch is turned to OFFthan 3 seconds while the vehicle is stopped.■ Sounds and vibrations caused by theThe VSC OFF indicator light will come onABS, brake assist, VSC, TRAC and hill-start assist control systemsand the “Traction Control Turned OFF” willbe shown on the multi-information display. *● A sound may be heard from the enginecompartment when the brake pedal isdepressed repeatedly, when the hybridPress theswitch again to turn thesystem is started or just after the vehiclesystem back to move. This sound does not indi-* : PCS (Pre-Collision System) will also becate that a malfunction has occurred inany of these (only pre-collision warning is● Any of the following conditions mayavailable). The PCS warning light willoccur when the above systems are oper-come on and
294
4-5. Using the driving support systems
Lexus dealer.
the
switch to turn the system off may
■ Operating conditions of hill-start assist
make it easier for you to rock the vehicle in
control
order to free it.
When all of the following conditions are
To turn the TRAC system off, quickly press
met, the hill-start assist control will operate:
and release the
switch.
● The shift position is in a position other
than P or N (when starting off for-
The “Traction Control Turned OFF” will be
ward/backward on an upward incline).
shown on the multi-information display.
● The vehicle is stopped.
Press the
switch again to turn the
● The accelerator pedal is not depressed.
system back on.
● The parking brake is not engaged.
● The power switch is in ON
■ Automatic system cancelation of hill-
start assist control
The hill-start assist control will turn off in any
of the following situations:
● The shift position is shifted to P or N.
● The accelerator pedal is depressed.
● The brake pedal is depressed and the
■ Turning off both TRAC and VSC sys-
parking brake is engaged.
tems
● A maximum of 2 seconds have elapsed
To turn the TRAC and VSC systems off,
after the brake pedal is released
press and hold the
switch for more
● The power switch is turned to OFF
than 3 seconds while the vehicle is stopped.
■ Sounds and vibrations caused by the
The VSC OFF indicator light will come on
ABS, brake assist, VSC, TRAC and hill-
start assist control systems
and the “Traction Control Turned OFF” will
be shown on the multi-information display. *
● A sound may be heard from the engine
compartment when the brake pedal is
depressed repeatedly, when the hybrid
Press the
switch again to turn the
system is started or just after the vehicle
system back on.
begins to move. This sound does not indi-
* : PCS (Pre-Collision System) will also be
cate that a malfunction has occurred in
any of these systems.
disabled (only pre-collision warning is
● Any of the following conditions may
available). The PCS warning light will
occur when the above systems are oper-
come on and a message will be displayed
ating.
on the multi-information display.
None of these indicates that a malfunc-
(P.225)
tion has occurred.
• Vibrations may be felt through the vehi-
■ When the message is displayed on the
cle body and steering.
multi-information display showing that
• A motor sound may be heard also after
TRAC has been disabled even if the
the vehicle comes to a stop.
■ ECB operating sound
switch has not been pressed
ECB operating sound may be heard in the
TRAC is temporary deactivated. If the
following cases, but it does not indicate that
information continues to show, contact your
a malfunction has occurred.
2954-5. Using the driving support systems● Operating sound heard from the enginethe hybrid system off. The EPS systemcompartment when the brake pedal isshould return to normal within 10 .■ Operating conditions of emergency● Motor sound of the brake system heardbrake signalfrom the front part of the vehicle whenWhen the following conditions are met, thethe driver’s door is brake signal will operate:● Operating sound heard from the engine● The emergency flashers are when one or two minutes● Actual vehicle speed is over 35 mph (55passed after the stop of the hybrid sys-km/h).tem.● The system judges from the vehicle■ Active Cornering Assist operationdeceleration that it is a sudden brakingsounds and the Active Cornering Assist is oper-■ Automatic system cancelation of emer-ated, operation sounds and vibrations maygency brake signalbe generated from the brake system, butthis is not a emergency brake signal will be can-celed in any of the following situations:■ Automatic reactivation of TRAC andVSC systems● The emergency flashers are turned on.4After turning the TRAC and VSC systems● The system judges from the vehicleoff, the systems will be automatically re-deceleration that is not a sudden brakingenabled in the following situations:● When the power switch is turned off■ Secondary Collision Brake operatingconditions● If only the TRAC system is turned off, theTRAC will turn on when vehicle speedThe system operates when the SRS detects a collision while the vehicleIf both the TRAC and VSC systems areis in off, automatic re-enabling will notHowever, the system does not operateoccur when vehicle speed the components are damaged.■ Operating conditions of Active Corner-■ Secondary Collision Brake automaticing AssistcancellationThe system operates in the following situa-The system is automatically canceled in
295
4-5. Using the driving support systems
● Operating sound heard from the engine
the hybrid system off. The EPS system
compartment when the brake pedal is
should return to normal within 10 minutes.
operated.
■ Operating conditions of emergency
● Motor sound of the brake system heard
brake signal
from the front part of the vehicle when
When the following conditions are met, the
the driver’s door is opened.
emergency brake signal will operate:
● Operating sound heard from the engine
● The emergency flashers are off.
compartment when one or two minutes
● Actual vehicle speed is over 35 mph (55
passed after the stop of the hybrid sys-
km/h).
tem.
● The system judges from the vehicle
■ Active Cornering Assist operation
deceleration that it is a sudden braking
sounds and vibrations
operation.
When the Active Cornering Assist is oper-
■ Automatic system cancelation of emer-
ated, operation sounds and vibrations may
gency brake signal
be generated from the brake system, but
this is not a malfunction.
The emergency brake signal will be can-
celed in any of the following situations:
■ Automatic reactivation of TRAC and
VSC systems
● The emergency flashers are turned on.
4
After turning the TRAC and VSC systems
● The system judges from the vehicle
off, the systems will be automatically re-
deceleration that is not a sudden braking
enabled in the following situations:
operation.
Driving
● When the power switch is turned off
■ Secondary Collision Brake operating
conditions
● If only the TRAC system is turned off, the
TRAC will turn on when vehicle speed
The system operates when the SRS airbag
increases.
sensor detects a collision while the vehicle
If both the TRAC and VSC systems are
is in motion.
turned off, automatic re-enabling will not
However, the system does not operate
occur when vehicle speed increases.
when the components are damaged.
■ Operating conditions of Active Corner-
■ Secondary Collision Brake automatic
ing Assist
cancellation
The system operates in the following situa-
The system is automatically canceled in any
tions.
of the following situations.
● TRAC/VSC can operate
● The vehicle speed drops to approxi-
● The driver is attempting to accelerate
mately 0 mph (0 km/h).
while turning
● A certain amount of time elapses during
● The system detects that the vehicle is
operation
drifting to the outer side
● The accelerator pedal is depressed a
● The brake pedal is released
large amount
■ Reduced effectiveness of the EPS sys-
■ Operating conditions of Vehicle Brak-
tem
ing Posture Control [Roll Control]
The effectiveness of the EPS system is
The system operates when the following
reduced to prevent the system from over-
occurs.
heating when there is frequent steering
● The vehicle speed is approximately 25
input over an extended period of time. The
mph (40 km/h) or more and less than 75
steering wheel may feel heavy as a result.
mph (120 km/h)
Should this occur, refrain from excessive
steering input or stop the vehicle and turn
● The brake pedal is released
2964-5. Using the driving support systems● When the system detects steering opera-the hybrid system until the display mes-tion over a certain levelsage has turned off.● When the slip indicator light is not on orflashing (does not operate during vehicleWARNINGstabilization control such as ABS, VSC,TRAC, etc.)■ The ABS does not operate effectivelywhen■ Cancel conditions of Vehicle BrakingPosture Control [Roll Control]● The limits of tire gripping performancehave been exceeded (such as exces-● TRAC/VSC cannot operatesively worn tires on a snow-covered● The brake pedal is depressed (does notroad).operate even during automatic brakingsuch as Radar Cruise Control)● The vehicle hydroplanes while drivingat high speed on wet or slick road.■ If a message about AWD is shown onthe multi-information display (AWD■ Stopping distance when the ABS ismodels)operating may exceed that of normalPerform the following ● “AWD System Overheated Switching toThe ABS is not designed to shorten the2WD Mode”vehicle’s stopping distance. Alwaysmaintain a safe distance from the vehicleAWD system is overheated. Stop the vehi-in front of you, especially in the followingcle in a safe place with the hybrid systemsituations:operating. *● When driving on dirt, gravel or snow-covered roadsIf the message disappears after a while,there is no problem. If the message remains,● When driving with tire chainshave the vehicle inspected by your Lexus● When driving over bumps in the roaddealer immediately.● When driving over roads with pot-● “AWD System Overheated 2WD ModeEngaged”holes or uneven surfacesAWD system has been temporarily■ TRAC/VSC may not operate effec-released and switched to front-wheel drivetively whendue to overheating. Stop the vehicle in aDirectional control and power may notsafe place with the hybrid system operat-be achievable while driving on slipperyroad surfaces, even if the TRAC/VSCing. *system is the message disappears after a while,Drive the vehicle careful
296
4-5. Using the driving support systems
● When the system detects steering opera-
the hybrid system until the display mes-
tion over a certain level
sage has turned off.
● When the slip indicator light is not on or
flashing (does not operate during vehicle
WARNING
stabilization control such as ABS, VSC,
TRAC, etc.)
■ The ABS does not operate effectively
when
■ Cancel conditions of Vehicle Braking
Posture Control [Roll Control]
● The limits of tire gripping performance
have been exceeded (such as exces-
● TRAC/VSC cannot operate
sively worn tires on a snow-covered
● The brake pedal is depressed (does not
road).
operate even during automatic braking
such as Radar Cruise Control)
● The vehicle hydroplanes while driving
at high speed on wet or slick road.
■ If a message about AWD is shown on
the multi-information display (AWD
■ Stopping distance when the ABS is
models)
operating may exceed that of normal
Perform the following actions.
conditions
● “AWD System Overheated Switching to
The ABS is not designed to shorten the
2WD Mode”
vehicle’s stopping distance. Always
maintain a safe distance from the vehicle
AWD system is overheated. Stop the vehi-
in front of you, especially in the following
cle in a safe place with the hybrid system
situations:
operating. *
● When driving on dirt, gravel or snow-
covered roads
If the message disappears after a while,
there is no problem. If the message remains,
● When driving with tire chains
have the vehicle inspected by your Lexus
● When driving over bumps in the road
dealer immediately.
● When driving over roads with pot-
● “AWD System Overheated 2WD Mode
Engaged”
holes or uneven surfaces
AWD system has been temporarily
■ TRAC/VSC may not operate effec-
released and switched to front-wheel drive
tively when
due to overheating. Stop the vehicle in a
Directional control and power may not
safe place with the hybrid system operat-
be achievable while driving on slippery
road surfaces, even if the TRAC/VSC
ing. *
system is operating.
If the message disappears after a while,
Drive the vehicle carefully in conditions
where stability and power may be lost.
AWD system will automatically recover. If
the message remains, have the vehicle
■ Active Cornering Assist does not
inspected by your Lexus dealer immedi-
operate effectively when
ately.
● Do not rely overly rely on Active Cor-
nering Assist. Active Cornering Assist
● “AWD System Malfunction 2WD Mode
may not operate effectively when
Engaged Visit Your Dealer”
accelerating down slopes or driving on
A malfunction occurs in the AWD system.
slippery road surfaces.
Have the vehicle inspected by your Lexus
dealer immediately.
*
: When stopping the vehicle, do not stop
2974-5. Using the driving support systems■ Handling of tires and the suspensionWARNINGUsing tires with any kind of problem or● When Active Cornering Assist fre-modifying the suspension will affect thequently operates, Active Corneringdriving assist systems, and may cause aAssist may temporarily stop operatingsystem to ensure proper operation of thebrakes, TRAC and VSC.■ Secondary Collision Brake■ Hill-start assist control does not oper-Do not rely solely upon the Secondaryate effectively whenCollision Brake. This system is designedto help reduce the possibility of further● Do not overly rely on hill-start assistdamage due to a secondary collision,control. Hill-start assist control mayhowever, that effect changes accordingnot operate effectively on steepto various conditions. Overly relying oninclines and roads covered with system may result in death or seriousinjury.● Unlike the parking brake, hill-startassist control is not intended to holdthe vehicle stationary for an extendedperiod of time. Do not attempt to usehill-start assist control to hold the vehi-cle on an incline, as doing so may lead4to an accident.■ When the TRAC/ABS/VSC is acti-DrivingvatedThe slip indicator light flashes. Alwaysdrive carefully. Reckless driving maycause an accident. Exercise particularcare when the indicator light flashes.■ When the TRAC/VSC systems areturned offBe especially careful and drive at aspeed appropriate to the road condi-tions. As these are the systems to helpensure vehicle stability and driving force,do not turn the TRAC/VSC systems offunless necessary.■ Replacing tiresMake sure that all tires are of the speci-fied size, brand, tread pattern and totalload capacity. In addition, make sure thatthe tires are inflated to the recom-mended tire inflation pressure ABS, TRAC and VSC systems willnot function correctly if different tires areinstalled on the your Lexus dealer for furtherinformation when replacing tires orwheels.
297
4-5. Using the driving support systems
■ Handling of tires and the suspension
WARNING
Using tires with any kind of problem or
● When Active Cornering Assist fre-
modifying the suspension will affect the
quently operates, Active Cornering
driving assist systems, and may cause a
Assist may temporarily stop operating
system to malfunction.
to ensure proper operation of the
brakes, TRAC and VSC.
■ Secondary Collision Brake
■ Hill-start assist control does not oper-
Do not rely solely upon the Secondary
ate effectively when
Collision Brake. This system is designed
to help reduce the possibility of further
● Do not overly rely on hill-start assist
damage due to a secondary collision,
control. Hill-start assist control may
however, that effect changes according
not operate effectively on steep
to various conditions. Overly relying on
inclines and roads covered with ice.
the system may result in death or serious
injury.
● Unlike the parking brake, hill-start
assist control is not intended to hold
the vehicle stationary for an extended
period of time. Do not attempt to use
hill-start assist control to hold the vehi-
cle on an incline, as doing so may lead
4
to an accident.
■ When the TRAC/ABS/VSC is acti-
Driving
vated
The slip indicator light flashes. Always
drive carefully. Reckless driving may
cause an accident. Exercise particular
care when the indicator light flashes.
■ When the TRAC/VSC systems are
turned off
Be especially careful and drive at a
speed appropriate to the road condi-
tions. As these are the systems to help
ensure vehicle stability and driving force,
do not turn the TRAC/VSC systems off
unless necessary.
■ Replacing tires
Make sure that all tires are of the speci-
fied size, brand, tread pattern and total
load capacity. In addition, make sure that
the tires are inflated to the recom-
mended tire inflation pressure level.
The ABS, TRAC and VSC systems will
not function correctly if different tires are
installed on the vehicle.
Contact your Lexus dealer for further
information when replacing tires or
wheels.
2984-6. Driving tipsHybrid Electric Vehicle driv-Accelerator pedal/brake pedaling tipsoperation Drive your vehicle smoothly. AvoidFor economical and ecologicalabrupt acceleration and decelera-driving, pay attention to the follow-tion. Gradual acceleration anding points:deceleration will make more effec-tive use of the electric motor (trac-Using Eco drive modetion motor) without having to usegasoline engine using Eco drive mode, the Avoid repeated corresponding to the accelera-Repeated acceleration consumestor pedal depression amount can behybrid battery (traction battery)generated more smoothly than it is inpower, resulting in poor fuel con-normal conditions. In addition, thesumption. Battery power can beoperation of the air conditioning sys-restored by driving with the acceler-tem (heating/cooling) will be mini-ator pedal slightly , improving the fuel economy.(P.290)When brakingUse of Hybrid System IndicatorMake sure to operate the brakes gen-tly and in a timely manner. A greaterThe Eco-friendly driving is possible byamount of electrical energy can bekeeping the indicator of Hybrid Systemregenerated when slowing within Eco area. (P.87,94)DelaysShift lever operationRepeated acceleration and decelera-tion, as well as long waits at trafficShift the shift position to D whenlights, will lead to bad fuel at a traffic light, or driving inCheck traffic reports before leavingheavy traffic, etc. Shift the shift positionand avoid delays as much as P when parking. When using the N,When driving in a traffic jam, gentlythere is no positive effect on fuel con-release the brake pedal to allow thesumption. In the N, the gasoline enginevehicle to move forward slightly whileoperates but electricity cannot be gen-avoiding overuse of the acceleratorerated. Also, when using the air condi-pedal. Doing so can help controltioning system, etc., the hybrid batteryexcessive gasoline con
298
4-6. Driving tips
4-6.Driving tips
Hybrid Electric Vehicle driv-
Accelerator pedal/brake pedal
ing tips
operation
 Drive your vehicle smoothly. Avoid
For economical and ecological
abrupt acceleration and decelera-
driving, pay attention to the follow-
tion. Gradual acceleration and
ing points:
deceleration will make more effec-
tive use of the electric motor (trac-
Using Eco drive mode
tion motor) without having to use
gasoline engine power.
When using Eco drive mode, the
 Avoid repeated acceleration.
torque corresponding to the accelera-
Repeated acceleration consumes
tor pedal depression amount can be
hybrid battery (traction battery)
generated more smoothly than it is in
power, resulting in poor fuel con-
normal conditions. In addition, the
sumption. Battery power can be
operation of the air conditioning sys-
restored by driving with the acceler-
tem (heating/cooling) will be mini-
ator pedal slightly released.
mized, improving the fuel economy.
(P.290)
When braking
Use of Hybrid System Indicator
Make sure to operate the brakes gen-
tly and in a timely manner. A greater
The Eco-friendly driving is possible by
amount of electrical energy can be
keeping the indicator of Hybrid System
regenerated when slowing down.
Indicator within Eco area. (P.87,
94)
Delays
Shift lever operation
Repeated acceleration and decelera-
tion, as well as long waits at traffic
Shift the shift position to D when
lights, will lead to bad fuel economy.
stopped at a traffic light, or driving in
Check traffic reports before leaving
heavy traffic, etc. Shift the shift position
and avoid delays as much as possible.
to P when parking. When using the N,
When driving in a traffic jam, gently
there is no positive effect on fuel con-
release the brake pedal to allow the
sumption. In the N, the gasoline engine
vehicle to move forward slightly while
operates but electricity cannot be gen-
avoiding overuse of the accelerator
erated. Also, when using the air condi-
pedal. Doing so can help control
tioning system, etc., the hybrid battery
excessive gasoline consumption.
(traction battery) power is consumed.
2994-6. Driving tipsHighway drivingLuggageControl and maintain the vehicle at aCarrying heavy luggage will lead toconstant speed. Before stopping at apoor fuel economy. Avoid carryingtoll booth or similar, allow plenty ofunnecessary luggage. Installing a largetime to release the accelerator androof rack will also cause poor fuelgently apply the brakes. A of electrical energy can beregenerated when slowing up before drivingSince the gasoline engine starts up andAir conditioningcuts out automatically when cold,Use the air conditioning only whenwarming up the engine is . Doing so can help reduceMoreover, frequently driving short dis-excessive gasoline will cause the engine to repeat-In summer: When the ambient tem-edly warm up, which can lead to excess4perature is high, use the recirculatedfuel mode. Doing so will help to reduceDrivingthe burden on the air conditioning sys-tem and reduce fuel consumption winter: Because the gasoline enginewill not automatically cut out until it andthe interior of the vehicle are warm, itwill consume fuel. Also, fuel consump-tion can be improved by avoidingoveruse of the tire inflation pressureMake sure to check the tire inflationpressure frequently. Improper tireinflation pressure can cause poor , as snow tires can cause largeamounts of friction, their use on dryroads can lead to poor fuel tires that are appropriate for theseason.
299
4-6. Driving tips
Highway driving
Luggage
Control and maintain the vehicle at a
Carrying heavy luggage will lead to
constant speed. Before stopping at a
poor fuel economy. Avoid carrying
toll booth or similar, allow plenty of
unnecessary luggage. Installing a large
time to release the accelerator and
roof rack will also cause poor fuel
gently apply the brakes. A greater
economy.
amount of electrical energy can be
regenerated when slowing down.
Warming up before driving
Since the gasoline engine starts up and
Air conditioning
cuts out automatically when cold,
Use the air conditioning only when
warming up the engine is unnecessary.
necessary. Doing so can help reduce
Moreover, frequently driving short dis-
excessive gasoline consumption.
tances will cause the engine to repeat-
In summer: When the ambient tem-
edly warm up, which can lead to excess
4
perature is high, use the recirculated
fuel consumption.
air mode. Doing so will help to reduce
Driving
the burden on the air conditioning sys-
tem and reduce fuel consumption as
well.
In winter: Because the gasoline engine
will not automatically cut out until it and
the interior of the vehicle are warm, it
will consume fuel. Also, fuel consump-
tion can be improved by avoiding
overuse of the heater.
Checking tire inflation pressure
Make sure to check the tire inflation
pressure frequently. Improper tire
inflation pressure can cause poor fuel
economy.
Also, as snow tires can cause large
amounts of friction, their use on dry
roads can lead to poor fuel economy.
Use tires that are appropriate for the
season.
3004-6. Driving tipsWinter driving tips● Use snow tires on all, not just somewheels.■ Driving with tire chainsCarry out the necessary prepara-Observe the following precautions totions and inspections before drivingreduce the risk of vehicle in winter. Always driveFailure to do so may result in the vehiclethe vehicle in a manner appropriatebeing unable to be driven safely, and maycause death or serious the prevailing weather condi-● Do not drive in excess of the specified for the tire chains beingused, or 30 mph (50 km/h), which-ever is for winter● Avoid driving on bumpy road surfaces Use fluids that are appropriate toor over prevailing outside temperatures.● Avoid sudden acceleration, abruptsteering, sudden braking and shifting• Engine oiloperations that cause sudden engine• Engine/power control unit coolantbraking.• Washer fluid● Slow down sufficiently before entering Have a service technician inspecta curve to ensure that vehicle controlis condition of the 12-volt battery.● Do not use LTA (Lane Tracing Assist). It is recommended that the vehicle isfitted with four snow run-flat tires orpurchase a set of tire chains for theNOTICEfront tires.■ Repairing or replacing snow tiresEnsure that all tires are the same size andRequest repairs or replacement of snowtires from Lexus dealers or legitimate tirebrand, and that chains match the size of is because the removal and attach-ment of snow tires affects the operationWARNINGof the tire pressure warning valves andtransmitters.■ Driving with snow tiresObserve the following precautions toreduce the risk of driving the vehicleFailure to do so may result in a loss ofvehicle control and cause death or seri-Perform the following according to theous conditions:● Use tires of the specified size. Do not try to forcibly open a window● Maintain the recommended level of airor move a wiper th
300
4-6. Driving tips
Winter driving tips
● Use snow tires on all, not just some
wheels.
■ Driving with tire chains
Carry out the necessary prepara-
Observe the following precautions to
tions and inspections before driving
reduce the risk of accidents.
the vehicle in winter. Always drive
Failure to do so may result in the vehicle
the vehicle in a manner appropriate
being unable to be driven safely, and may
cause death or serious injury.
to the prevailing weather condi-
● Do not drive in excess of the speed
tions.
limit specified for the tire chains being
used, or 30 mph (50 km/h), which-
ever is lower.
Preparation for winter
● Avoid driving on bumpy road surfaces
 Use fluids that are appropriate to
or over potholes.
the prevailing outside temperatures.
● Avoid sudden acceleration, abrupt
steering, sudden braking and shifting
• Engine oil
operations that cause sudden engine
• Engine/power control unit coolant
braking.
• Washer fluid
● Slow down sufficiently before entering
 Have a service technician inspect
a curve to ensure that vehicle control
is maintained.
the condition of the 12-volt battery.
● Do not use LTA (Lane Tracing Assist).
 It is recommended that the vehicle is
fitted with four snow run-flat tires or
purchase a set of tire chains for the
NOTICE
front tires.
■ Repairing or replacing snow tires
Ensure that all tires are the same size and
Request repairs or replacement of snow
tires from Lexus dealers or legitimate tire
brand, and that chains match the size of the
retailers.
tires.
This is because the removal and attach-
ment of snow tires affects the operation
WARNING
of the tire pressure warning valves and
transmitters.
■ Driving with snow tires
Observe the following precautions to
reduce the risk of accidents.
Before driving the vehicle
Failure to do so may result in a loss of
vehicle control and cause death or seri-
Perform the following according to the
ous injury.
driving conditions:
● Use tires of the specified size.
 Do not try to forcibly open a window
● Maintain the recommended level of air
or move a wiper that is frozen. Pour
pressure.
warm water over the frozen area to
● Do not drive in excess of 75 mph (120
melt the ice. Wipe away the water
km/h), regardless of the type of snow
tires being used.
immediately to prevent it from
3014-6. Driving the shift position to P. (P.192) If the vehicle is left parked with the To ensure proper operation of thebrakes damp in cold temperatures,climate control system fan, removethere is a possibility of the brakesany snow that has accumulated air inlet vents in front of  Check for and remove any excess■ When parking the vehicleice or snow that may have accumu-When parking the vehicle without apply-lated on the exterior lights, outsideing the parking brake, make sure torear view mirrors, windows, vehi-chock the wheels. If you do not chock thewheels, the vehicle may move unexpect-cle’s roof, chassis, around the tiresedly, possibly resulting in an on the brakes. Remove any snow or mud from theSelecting tire chainsbottom of your shoes before gettingin the the correct tire chain size when4mounting the tire chains. Chain size isregulated for each tire driving the vehicleDrivingAccelerate the vehicle slowly, keep asafe distance between you and thevehicle ahead, and drive at a reducedspeed suitable to road parking the vehicle Park the vehicle and shift the shiftposition to P without setting theSide chain:parking brake. The parking brakeA 0.12 in. (3 mm) in diametermay freeze up, preventing it fromB 0.39 in. (10 mm) in widthbeing released. If the vehicle isparked without setting the parkingC 0.98 in. (25 mm) in lengthbrake, make sure to block theCross chain:wheels.D 0.16 in. (4 mm) in diameterFailure to do so may be dangerousbecause it may cause the vehicle toE 0.55 in. (14 mm) in widthmove unexpectedly, possibly lead-F 0.98 in. (25 mm) in lengthing to an the parking brake is in automaticmode, release the parking brake after shift-
301
4-6. Driving tips
freezing.
ing the shift position to P. (P.192)
 If the vehicle is left parked with the
 To ensure proper operation of the
brakes damp in cold temperatures,
climate control system fan, remove
there is a possibility of the brakes
any snow that has accumulated on
freezing.
the air inlet vents in front of the
windshield.
WARNING
 Check for and remove any excess
■ When parking the vehicle
ice or snow that may have accumu-
When parking the vehicle without apply-
lated on the exterior lights, outside
ing the parking brake, make sure to
rear view mirrors, windows, vehi-
chock the wheels. If you do not chock the
wheels, the vehicle may move unexpect-
cle’s roof, chassis, around the tires
edly, possibly resulting in an accident.
or on the brakes.
 Remove any snow or mud from the
Selecting tire chains
bottom of your shoes before getting
in the vehicle.
Use the correct tire chain size when
4
mounting the tire chains. Chain size is
regulated for each tire size.
When driving the vehicle
Driving
Accelerate the vehicle slowly, keep a
safe distance between you and the
vehicle ahead, and drive at a reduced
speed suitable to road conditions.
When parking the vehicle
 Park the vehicle and shift the shift
position to P without setting the
Side chain:
parking brake. The parking brake
A 0.12 in. (3 mm) in diameter
may freeze up, preventing it from
B 0.39 in. (10 mm) in width
being released. If the vehicle is
parked without setting the parking
C 0.98 in. (25 mm) in length
brake, make sure to block the
Cross chain:
wheels.
D 0.16 in. (4 mm) in diameter
Failure to do so may be dangerous
because it may cause the vehicle to
E 0.55 in. (14 mm) in width
move unexpectedly, possibly lead-
F 0.98 in. (25 mm) in length
ing to an accident.
When the parking brake is in automatic
mode, release the parking brake after shift-
3024-6. Driving tipsRegulations on the use of tireUtility vehicle precautionschainsThis vehicle belongs to the utilityRegulations regarding the use of tirevehicle class, which has higherchains vary depending on location andground clearance and narrowertype of road. Always check local regu-tread in relation to the height of itslations before installing of gravity.■ Tire chain installationUtility vehicle featureObserve the following precautions wheninstalling and removing chains: Specific design characteristics give● Install and remove tire chains in a safeit a higher center of gravity passenger cars. This vehi-● Install tire chains on the front tires not install tire chains on the rear design feature causes this type● Install tire chains on front tires as tightlyof vehicle to be more likely to roll-as possible. Retighten chains after drivingover. Utility vehicles have a signifi-1/4 - 1/2 mile (0.5 - 1.0 km).cantly higher rollover rate than● Install tire chains following the instruc-other types of provided with the tire chains. An advantage of the higher groundNOTICEclearance is a better view of the■ Fitting tire chainsroad allowing you to anticipateThe tire pressure warning valves may not function correctly It is not designed for cornering atwhen tire chains are same speeds as ordinary pas-senger cars any more than low-Windshield wipersslung sports cars designed to per-To enable the windshield wipers to beform satisfactorily under off-roadlifted when heavy snow or icy condi-conditions. Therefore, sharp turns attions are expected, change the restexcessive speeds may cause roll-position of the windshield wipers retracted position below the hoodto the service position using the wiperlever. (P.208)
302
4-6. Driving tips
Regulations on the use of tire
Utility vehicle precautions
chains
This vehicle belongs to the utility
Regulations regarding the use of tire
vehicle class, which has higher
chains vary depending on location and
ground clearance and narrower
type of road. Always check local regu-
tread in relation to the height of its
lations before installing chains.
center of gravity.
■ Tire chain installation
Utility vehicle feature
Observe the following precautions when
installing and removing chains:
 Specific design characteristics give
● Install and remove tire chains in a safe
it a higher center of gravity than
location.
ordinary passenger cars. This vehi-
● Install tire chains on the front tires only.
Do not install tire chains on the rear tires.
cle design feature causes this type
● Install tire chains on front tires as tightly
of vehicle to be more likely to roll-
as possible. Retighten chains after driving
over. Utility vehicles have a signifi-
1/4 - 1/2 mile (0.5 - 1.0 km).
cantly higher rollover rate than
● Install tire chains following the instruc-
other types of vehicles.
tions provided with the tire chains.
 An advantage of the higher ground
NOTICE
clearance is a better view of the
■ Fitting tire chains
road allowing you to anticipate
The tire pressure warning valves and
problems.
transmitters may not function correctly
 It is not designed for cornering at
when tire chains are fitted.
the same speeds as ordinary pas-
senger cars any more than low-
Windshield wipers
slung sports cars designed to per-
To enable the windshield wipers to be
form satisfactorily under off-road
lifted when heavy snow or icy condi-
conditions. Therefore, sharp turns at
tions are expected, change the rest
excessive speeds may cause roll-
position of the windshield wipers from
over.
the retracted position below the hood
to the service position using the wiper
lever. (P.208)
3034-6. Driving tips Drive your vehicle only in areasWARNINGwhere off-road vehicles are permit-■ Utility vehicle precautionsted to observe the following precau- Respect private property. Gettions to minimize the risk of death or seri-ous injury or damage to your vehicle:owner’s permission before entering● In a rollover crash, an unbelted personprivate significantly more likely to die than a Do not enter areas that are wearing a seat belt. Therefore,the driver and all passengers shouldHonor gates, barriers and signs thatalways fasten their seat travel.● Avoid sharp turns or abrupt maneu- Stay on established roads. Whenvers, if at all are wet, driving tech-Failure to operate this vehicle cor-rectly may result in loss of control orniques should be changed or travelvehicle rollover causing death or seri-delayed to prevent damage toous .● Loading cargo on the roof luggage AWD models: Avoid driving on4carrier will make the center of thevehicle gravity higher. Avoid highvery steep, slippery roads and otherspeeds, sudden starts, sharp turns,surfaces, such as sand, where theDrivingsudden braking or abrupt maneuvers,tires are liable to lose traction. Yourotherwise it may result in loss of con-trol or vehicle rollover due to failure tovehicle may not perform as well asoperate this vehicle AWD on-road vehi-● Always slow down in gusty on these of its profile and higher cen-ter of gravity, your vehicle is more sen-■ Additional information for off-road driv-sitive to side winds than an ordinaryingpassenger car. Slowing down willallow you to have better control. For owners in U.S. mainland, Hawaii andPuerto Rico:● Do not drive horizontally across steepTo obtain additional information pertainingslopes. Driving straight up or straightto driving your vehicle off-road, consult thedown is preferred. Your vehicle (orfollowing organizations.a
303
4-6. Driving tips
 Drive your vehicle only in areas
WARNING
where off-road vehicles are permit-
■ Utility vehicle precautions
ted to travel.
Always observe the following precau-
 Respect private property. Get
tions to minimize the risk of death or seri-
ous injury or damage to your vehicle:
owner’s permission before entering
● In a rollover crash, an unbelted person
private property.
is significantly more likely to die than a
 Do not enter areas that are closed.
person wearing a seat belt. Therefore,
the driver and all passengers should
Honor gates, barriers and signs that
always fasten their seat belts.
restrict travel.
● Avoid sharp turns or abrupt maneu-
 Stay on established roads. When
vers, if at all possible.
conditions are wet, driving tech-
Failure to operate this vehicle cor-
rectly may result in loss of control or
niques should be changed or travel
vehicle rollover causing death or seri-
delayed to prevent damage to
ous injury.
roads.
● Loading cargo on the roof luggage
 AWD models: Avoid driving on
4
carrier will make the center of the
vehicle gravity higher. Avoid high
very steep, slippery roads and other
speeds, sudden starts, sharp turns,
surfaces, such as sand, where the
Driving
sudden braking or abrupt maneuvers,
tires are liable to lose traction. Your
otherwise it may result in loss of con-
trol or vehicle rollover due to failure to
vehicle may not perform as well as
operate this vehicle correctly.
conventional AWD on-road vehi-
● Always slow down in gusty crosswinds.
cles on these surfaces.
Because of its profile and higher cen-
ter of gravity, your vehicle is more sen-
■ Additional information for off-road driv-
sitive to side winds than an ordinary
ing
passenger car. Slowing down will
allow you to have better control.
 For owners in U.S. mainland, Hawaii and
Puerto Rico:
● Do not drive horizontally across steep
To obtain additional information pertaining
slopes. Driving straight up or straight
to driving your vehicle off-road, consult the
down is preferred. Your vehicle (or
following organizations.
any similar off-road vehicle) can tip
over sideways much more easily than
● State and Local Parks and Recreation
forward or backward.
Departments
● State Motor Vehicle Bureau
Off-road driving
● Recreational Vehicle Clubs
● U.S. Forest Service and Bureau of Land
Your vehicle is not designed to be
Management
driven off-road. However, in the event
that off-road driving cannot be
avoided, please observe the following
precautions to help avoid the areas
prohibited to vehicles.
3044-6. Driving tips● Water entering the hybrid transmis-WARNINGsion and rear electric motor (traction■ Off-road driving precautionsmotor) will cause deterioration inhybrid transmission quality. The mal-Always observe the following precau-function indicator may come on, andtions to minimize the risk of death or seri-the vehicle may not be injury or damage to your vehicle:● Drive carefully when off the road. Do● Water can wash the grease fromnot take unnecessary risks by drivingwheel bearings, causing rusting andin dangerous failure, and may also enterthe hybrid transmission case, reducing● Do not grip the steering wheel spokesthe gear oil’s lubricating driving off-road. A bad bumpcould jerk the wheel and injure your■ When you drive through waterhands. Keep both hands and especiallyIf driving through water, such as whenyour thumbs on the outside of the shallow streams, first check thedepth of the water and the bottom of the● Always check your brakes for effec-riverbed for firmness. Drive slowly andtiveness immediately after driving inavoid deep , mud, water or snow.■ Inspection after off-road driving● After driving through tall grass, mud,rock, sand, water, etc., check that● Sand and mud that has accumulatedthere is no grass, bush, paper, rags,around brake discs may affect brakingstone, sand, etc. adhering or trappedefficiency and may damage brake sys-to the underbody. Clear off any suchtem from the underbody. If the vehi-● Always perform a maintenancecle is used with these materialsinspection after each day of off-roadtrapped or adhering to the underbody,driving that has taken you througha breakdown or fire could terrain, sand, mud, or water. Forscheduled maintenance information,● When driving off-road or in ruggedrefer to the “Warranty and Servicesterrain, do not drive at excessiveGuide/Owner’s Manual Supple-speeds, jump, make sharp turns, strikement/Scheduled Maintena
304
4-6. Driving tips
● Water entering the hybrid transmis-
WARNING
sion and rear electric motor (traction
■ Off-road driving precautions
motor) will cause deterioration in
hybrid transmission quality. The mal-
Always observe the following precau-
function indicator may come on, and
tions to minimize the risk of death or seri-
the vehicle may not be drivable.
ous injury or damage to your vehicle:
● Drive carefully when off the road. Do
● Water can wash the grease from
not take unnecessary risks by driving
wheel bearings, causing rusting and
in dangerous places.
premature failure, and may also enter
the hybrid transmission case, reducing
● Do not grip the steering wheel spokes
the gear oil’s lubricating qualities.
when driving off-road. A bad bump
could jerk the wheel and injure your
■ When you drive through water
hands. Keep both hands and especially
If driving through water, such as when
your thumbs on the outside of the rim.
crossing shallow streams, first check the
depth of the water and the bottom of the
● Always check your brakes for effec-
riverbed for firmness. Drive slowly and
tiveness immediately after driving in
avoid deep water.
sand, mud, water or snow.
■ Inspection after off-road driving
● After driving through tall grass, mud,
rock, sand, water, etc., check that
● Sand and mud that has accumulated
there is no grass, bush, paper, rags,
around brake discs may affect braking
stone, sand, etc. adhering or trapped
efficiency and may damage brake sys-
to the underbody. Clear off any such
tem components.
matter from the underbody. If the vehi-
● Always perform a maintenance
cle is used with these materials
inspection after each day of off-road
trapped or adhering to the underbody,
driving that has taken you through
a breakdown or fire could occur.
rough terrain, sand, mud, or water. For
scheduled maintenance information,
● When driving off-road or in rugged
refer to the “Warranty and Services
terrain, do not drive at excessive
Guide/Owner’s Manual Supple-
speeds, jump, make sharp turns, strike
ment/Scheduled Maintenance”.
objects, etc. This may cause loss of
control or vehicle rollover causing
death or serious injury. You are also
risking expensive damage to your
vehicle’s suspension and chassis.
NOTICE
■ To prevent water damage
Take all necessary safety measures to
ensure that water damage to the hybrid
battery (traction battery), hybrid system
or other components does not occur.
● Water entering the engine compart-
ment may cause severe damage to the
hybrid system. Water entering the
interior may cause the hybrid battery
stowed under the rear seats to short
circuit.

Popular Owner Manuals