2019-2026 Lexus UX SUV Interior features User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Interior features for Your Lexus UX SUV First Generation (2019-2026)

305
5
5
Interior features
Interior features
5-1. Lexus Climate Concierge
Lexus Climate Concierge.....
306
5-2. Using the air conditioning system
and defogger
Automatic air conditioning sys-
tem................................................
307
Heated steering wheel/seat heat-
ers/seat ventilators.................
314
5-3. Using the interior lights
Interior lights list..........................
317
5-4. Using the storage features
List of storage features............
320
Luggage compartment features
........................................................
323
5-5. Using the other interior features
Other interior features ...........
328
Garage door opener...............339
306
5-1. Lexus Climate Concierge
5-1.Lexus Climate Concierge
Lexus Climate Concierge operates in
conjunction with the automatic mode
switch of the air conditioning control
panel.
1 Select in the main menu on the
Center Display.
2 Select “Climate”.
3 Select “Options”.
4 Select “Climate concierge”.
5 Turn the automatic mode switch
on.
■ Automatic air conditioning system
(P.307)
The temperature can be adjusted inde-
pendently for the driver seat and pas-
senger seat.
■ Seat heaters and ventilators (if
equipped) (P.314)
Heating or ventilation is automatically
selected according to the set tempera-
ture of the air conditioning system, the
outside temperature, etc.
The seat heater and ventilator of the
front passenger seat operate in auto-
matic mode if a passenger is detected.
■ Heated steering wheel (if
equipped) (P.314)
Heated steering wheel operates auto-
matically according to the set tem-
perature of the air conditioning system,
the outside temperature, etc.
■ Seat heater/ventilator operation
When automatic mode is selected using the
seat heater/ventilator switch, passenger
detection is not performed.
Lexus Climate Concierge
The seat heaters (if equipped), seat
ventilators (if equipped) and heated
steering wheel (if equipped) are
each automatically controlled
according to the set temperature of
the air conditioning system, the out-
side and cabin temperature, etc.
Lexus Climate Concierge allows a
comfortable condition to be main-
tained without adjusting each sys-
tem.
Lexus Climate Concierge can be
operated using the air conditioning
control panel (P.307) and air
conditioning control screen on the
Center Display (P.310).
Turning on Lexus Climate Con-
cierge
Operation of each system
307
5-2. Using the air conditioning system and defogger
5
Interior features
5-2.Using the air conditioning system and defogger
Left-hand side temperature control switch
Fan speed control switch
Automatic mode switch
Off switch
Windshield defogger switch
Rear window and outside rear view mirror defoggers switch
Outside/recirculated air mode switch
Airflow mode control switch
Right-hand side temperature control switch
Automatic air conditioning system
Air outlets and fan speed are automatically adjusted according to the tem-
perature setting.
The air conditioning system can be operated using the air conditioning control
panel and air conditioning control screen on the Center Display (P.310).
Air conditioning controls
A
B
C
D
E
F
G
H
I
308
5-2. Using the air conditioning system and defogger
■ Adjusting the temperature setting
Operate the temperature control
switch upwards to increase the tem-
perature and downwards to decrease
the temperature.
■ Setting the fan speed
Operate the fan speed control switch
upwards to increase the fan speed and
downwards to decrease the fan speed.
Press the off switch to turn the fan off.
■ Change the airflow mode
Operate the airflow mode control
switch upwards or downwards.
The mode changes as follows each time
the switch is operated.
Air flows to the upper body.
Air flows to the upper body and
feet.
Air flows to the feet.
Air flows to the feet and the wind-
shield defogger operates.
■ Switching between outside air and
recirculated air modes
Press the outside/recirculated air
mode switch.
The mode switches between outside air
mode (the indicator is off) and recirculated
air mode (the indicator is on) each time the
switch is pressed.
■ Defogging the windshield
Defoggers are used to defog the wind-
shield and front side windows.
Press the windshield defogger switch.
Set the outside/recirculated air mode
switch to outside air mode if the recircu-
lated air mode is used. (It may switch auto-
matically.)
To defog the windshield and the side win-
dows quickly, turn the air flow and tem-
perature up.
To return to the previous mode, press the
windshield defogger switch again when the
windshield is defogged.
■ Defogging the rear window and
outside rear view mirrors
Defoggers are used to defog the rear
window and to remove raindrops, dew
and frost from the outside rear view
mirrors.
Press the rear window and outside
rear view mirror defoggers switch.
The defoggers will automatically turn off
after a period of time.
■ Windshield wiper de-icer (if
equipped)
P.311
A
B
C
D
309
5-2. Using the air conditioning system and defogger
5
Interior features
■ When the outside temperature exceeds
75°F (24°C) and the air conditioning
system is on
● In order to reduce the air conditioning
power consumption, the air conditioning
system may switch to recirculated air
mode automatically.
This may also reduce fuel consumption.
● Recirculated air mode is selected as a
default mode when the power switch is
turned to ON.
● It is possible to switch to outside air mode
at any time by pressing the outside/recir-
culated air mode switch.
■ Fogging up of the windows
● The windows will easily fog up when the
humidity in the vehicle is high. Selecting
“A/C” will dehumidify the air from the
outlets and defog the windshield effec-
tively.
● If you turn “A/C” off, the windows may
fog up more easily.
● The windows may fog up if the recircu-
lated air mode is used.
■ When driving on dusty roads
Close all windows. If dust thrown up by the
vehicle is still drawn into the vehicle after
closing the windows, it is recommended
that the air intake mode be set to outside air
mode and the fan speed to any setting
except off.
■ Outside/recirculated air mode
● Setting to the recirculated air mode tem-
porarily is recommended in preventing
dirty air from entering the vehicle interior
and helping to cool the vehicle when the
outside air temperature is high.
● Outside/recirculated air mode may
automatically switch depending on the
temperature setting or the inside tem-
perature.
■ Registering air conditioning settings to
electronic keys (vehicles with driving
position memory)
● Unlocking the vehicle using an electronic
key and turning the power switch to ON
will recall that key’s registered air condi-
tioning settings.
● When the power switch is turned off, the
current air conditioning settings will auto-
matically be registered to the electronic
key that was used to unlock the vehicle.
● The system may not operate correctly if
more than one electronic key is in the
vicinity or if the smart access system with
push-button start is used to unlock a pas-
senger door.
● The doors that can recall the air condi-
tioning setting when unlocked using the
smart access system with push-button
start can be changed.
*
For details, con-
tact your Lexus dealer.
*
: The doors that can recall the driving posi-
tion memory are changed at the same
time.
■ Operation of the air conditioning sys-
tem in Eco drive mode
● In Eco drive mode, the air conditioning
system is controlled as follows to priori-
tize fuel efficiency
• Engine speed and compressor operation
controlled to restrict heating/cooling
capacity
• Fan speed restricted when automatic
mode is selected
● To improve air conditioning perfor-
mance, perform the following operations
• Turn off eco air conditioning mode
(P.310)
• Adjust the fan speed
• Turn off Eco drive mode
■ When the outside temperature is low
The dehumidification function may not
operate even when “A/C” is selected.
■ Ventilation and air conditioning odors
● To let fresh air in, set the air conditioning
system to the outside air mode.
● During use, various odors from inside
and outside the vehicle may enter into
and accumulate in the air conditioning
system. This may then cause odor to be
emitted from the vents.
● To reduce potential odors from occur-
ring, the start timing of the blower may be
delayed for a short period of time imme-
310
5-2. Using the air conditioning system and defogger
diately after the air conditioning system is
started in automatic mode.
● When parking, the system automatically
switches to outside air mode to encour-
age better air circulation throughout the
vehicle, helping to reduce odors that
occur when starting the vehicle.
■ Using the Intelligent Assistant
Air conditioning system can be operated
using the Intelligent Assistant. For details,
refer to the “MULTIMEDIA OWNER’S
MANUAL”.
■ Air conditioning filter
P.388
■ Air conditioning system refrigerant
● A label regrading the refrigerant of the
air conditioning system is attached to the
hood at the location shown in the follow-
ing illustration.
● The meaning of each symbol on the label
are as follows:
■ Customization
Settings (e.g. A/C automatic mode switch
operation) can be changed.
(Customizable features: P.470)
■ Air conditioning control screen
1
Select in the main menu on the
Center Display.
2
Select “Climate”.
If the option screen is displayed, select
“Front”.
Caution
Air conditioning system
Air conditioning system
lubricant type
Requires registered tech-
nician to service air con-
ditioning system
Flammable refrigerant
WARNING
■ To prevent the windshield from fog-
ging up
Do not use the windshield defogger
switch during cool air operation in
extremely humid weather. The difference
between the temperature of the outside
air and that of the windshield can cause
the outer surface of the windshield to fog
up, blocking your vision.
■ When the outside rear view mirror
defoggers are operating
Do not touch the outside rear view mir-
ror surfaces, as they can become very
hot and burn you.
NOTICE
■ To prevent 12-volt battery discharge
Do not leave the air conditioning system
on longer than necessary when the
hybrid system is off.
■ When repairing/replacing parts of
the air conditioning system
Have repair/replacement performed by
your Lexus dealer. When a part of the air
conditioning system, such as the evapo-
rator, is to be replaced, it must be
replaced with a new one.
Air conditioning control screen
311
5-2. Using the air conditioning system and defogger
5
Interior features
Sub menu
Selecting the sub menu item to switch the
screen display.
“Front”: Display the air conditioning con-
trol screen
“Options”: Display the option screen
Select the air flow mode
Each time the switch is selected, the airflow
mode is changed.
: Air flows to the upper body
: Air flows to the upper body and feet
: Air flows to the feet
: Air flows to the feet and the wind-
shield defogger operates
Turn the function on/off
Each of the following functions can be
switched on and off.
When the function is on, the indicator illu-
minates on the control screen.
“A/C”: Set cooling and dehumidification
function
“Sync”: Adjust the temperature for driver
and front passenger seats simultaneously
(“Sync” mode) (P.312)
: Select front seat concentrated
air flow mode (S-FLOW) (P.313)
Fan speed level display
The current fan speed level is displayed.
■ Option screen
Select “Options” on the air condition-
ing control screen (P.310).
The functions can be switched (on)
and (off).
Set Lexus Climate Concierge
(P.306)
Set eco air conditioning mode
Air conditioning and heater output is lim-
ited to prioritize fuel economy.
Prevent ice from building up on the
windshield and wiper blades
(Windshield wiper de-icer) (if
equipped)
■ Windshield wiper de-icer (if equipped)
This feature is used to prevent ice from
building up on the windshield and wiper
blades.
The windshield wiper de-icer will automati-
cally turn off after a period of time.
■ Eco air conditioning mode
When Eco drive mode is selected using the
driving mode select switch, eco air condi-
tioning mode turns on.
When a driving mode other than Eco drive
mode is selected, eco air conditioning
mode may turn off.
A
B
C
D
A
B
C
312
5-2. Using the air conditioning system and defogger
1 Press the automatic mode switch.
2
Adjust the temperature setting.
3
To stop the operation, press the off
switch.
If the fan speed setting or air flow
modes are operated, the automatic
mode indicator goes off. However,
automatic mode for functions other
than that operated is maintained.
■ Using automatic mode
Fan speed is adjusted automatically
according to the temperature setting and
the ambient conditions.
Therefore, the fan may stop for a while until
warm or cool air is ready to flow immedi-
ately after the automatic mode switch is
pressed or “AUTO” is selected.
Cool air may blow around the upper body
even when the heater is on due to sunlight.
To turn on the “Sync” mode, select
“Sync” on the air conditioning control
screen.
The driver’s side temperature control
switches can be used to adjust the tem-
perature for the driver’s and passenger’s
side. To enter individual mode, operate the
passenger’s side temperature control
switches or select “Sync” again. When the
“Sync” mode is on, the indicator illuminates
on display.
■ Location of air outlets
The air outlets and air volume changes
according to the selected air flow
mode.
■ Adjusting the position of and open-
ing and closing the air outlets
Front
Direct air flow to the left or right, up or
down
Turn the knob to open or close the vent
WARNING
■ To prevent burns (vehicles with wind-
shield wiper de-icer)
Do not touch the glass at lower part of
the windshield or to the side of the front
pillars when the windshield wiper de-icer
is on.
Using automatic mode
Adjusting the temperature for
driver and front passenger seats
simultaneously (“Sync” mode)
Air outlet layout and operations
313
5-2. Using the air conditioning system and defogger
5
Interior features
1 Open the outlet
2
Close the outlet
Rear
1
Direct air flow to the left or right, up
or down
2
Turn the knob to open or close the
vent
This function automatically controls the
air conditioning airflow so that priority
is given to the front seats. When front
seat concentrated airflow mode is
enabled, air flow to the rear seats will
be stopped for increased fuel effi-
ciency.
Front seat concentrated airflow mode
operates in the following situations.
The windshield defogger is not
operating
While operating, the indicator on the air
conditioning control screen illuminates.
■ Manually turning front seat con-
centrated airflow mode on/off
In front seat concentrated airflow
mode, directing airflow to the front
seats only and to all seats can be
switched via switch operation. When
the mode has been switched manually,
automatic airflow control stops operat-
ing.
Select on the air conditioning
control screen (P.310) and switch
the airflow.
Indicator illuminated: Airflow to the
front seats only
Indicator off: Airflow to all the seats
■ Operation of automatic airflow control
● In order to maintain a comfortable inte-
rior, airflow may be directed to seats
without passengers immediately after the
hybrid system is started and at other
times depending on the outside tempera-
ture.
WARNING
■ To prevent the windshield defogger
from operating improperly
Do not place anything on the instrument
panel which may cover the air outlets.
Otherwise, air flow may be obstructed,
preventing the windshield defoggers
from defogging.
Front seat concentrated airflow
mode (S-FLOW)
314
5-2. Using the air conditioning system and defogger
● After the hybrid system is started, if pas-
sengers move around inside or enter/exit
the vehicle, the system cannot accurately
detect the presence of passengers and
automatic airflow control will not oper-
ate.
● If it is very hot or very cold and the system
determines that air conditioning to the
whole vehicle is required, air flow will be
directed to the rear seats, regardless of
whether front seat concentrated airflow
mode is enabled/disabled.
● If front seat concentrated airflow mode is
disabled manually, it will be automatically
enabled when the hybrid system is
started after being stopped for a period
of time.
Only when front seat concentrated airflow
mode is enabled automatically, it will be
automatically disabled when a rear door is
opened and closed.
● When front seat concentrated airflow
mode is enabled manually, air flow will
not be directed to the rear seats, even
though a rear door is opened and closed.
To direct air flow to the rear seats, manually
disable front seat concentrated airflow
mode.
■ Passenger detection conditions
● The detection of a rear seat passenger is
made by the opening/closing of a rear
door.
Once the system determines the presence
of a rear seat passenger, it will not deter-
mine otherwise during that trip.
■ To return to automatic airflow control
1
With the indicator off, turn the power
switch off.
2
After 60 minutes or more elapse, turn
the power switch to ON.
*
: If equipped
Heated steering wheel
*
/seat
h
eaters
*
/seat ventilators
*
Heated steering wheel
Warms up the grip of the steering
wheel
Seat heaters
Warm up the seat upholstery
Seat ventilators
Maintain good airflow on the seat
upholstery by sucking air into the
seats
WARNING
■ To prevent minor burn injuries
Care should be taken if anyone in the fol-
lowing categories comes in contact with
the steering wheel or seats when the
heater is on:
● Babies, small children, the elderly, the
sick and the physically challenged
● Persons with sensitive skin
● Persons who are fatigued
● Persons who have taken alcohol or
drugs that induce sleep (sleeping
drugs, cold remedies, etc.)
NOTICE
■ To prevent damage to the seat heat-
ers and seat ventilators
Do not put heavy objects that have an
uneven surface on the seat and do not
stick sharp objects (needles, nails, etc.)
into the seat.
■ To prevent 12-volt battery discharge
Do not use the functions when the hybrid
system is off.
315
5-2. Using the air conditioning system and defogger
5
Interior features
Turns the heated steering wheel on/off
Each time the switch is pressed, the opera-
tion condition changes as follows.
AUTO (lit) Hi (2 segments lit) Lo (1
segment lit) Off
The AUTO indicator and/or level indi-
cator illuminates during operation.
■ The heated steering wheel can be used
when
The power switch is in ON.
■ Customization
Steering wheel heating preference in auto-
matic mode can be changed. (Customiz-
able features: P.470)
■ Seat heaters
Turns the seat heaters on/off
Each time the switch is pressed, the opera-
tion condition changes as follows.
AUTO (lit) Hi (3 segments lit) Mid
(2 segments lit) Lo (1 segment lit)
Off
The AUTO indicator and/or level indi-
cator illuminates during operation.
■ Seat ventilators
Turns the seat ventilators on/off
Each time the switch is pressed, the opera-
tion condition changes as follows.
AUTO (lit) Hi (3 segments lit) Mid
(2 segments lit) Lo (1 segment lit)
Off
The AUTO indicator and/or level indi-
cator illuminates during operation.
■ The seat ventilators can be used when
The power switch is in ON.
■ Air conditioning system-linked control
mode
When the seat ventilator fan speed level is
Hi, the seat ventilator fan speed becomes
higher according to the fan speed of the air
conditioning system.
■ Customization
Settings for the seat heaters and ventilators
can be changed. (Customizable features:
P.470)
Heated steering wheel
Seat heaters and ventilators
(front seats)
A
B
A
B
A
B
316
5-2. Using the air conditioning system and defogger
1 Select in the main menu on the
Center Display.
2
Select “Comfort”.
Adjust the seat ventilator fan speed
level
Each time the switch is selected, the fan
speed level and level indicator (blue)
change as follows:
Hi (3 segments lit) Mid (2 segments lit)
Lo (1 segment lit) Off
Adjust the seat heater temperature
level
Each time the switch is selected, the tem-
perature level and level indicator (red)
change as follows:
Hi (3 segments lit) Mid (2 segments lit)
Lo (1 segment lit) Off
Adjust the heated steering wheel
temperature level
Each time the switch is selected, the tem-
perature level and level indicator (red)
change as follows:
Hi (2 segments lit) Lo (1 segment lit)
Off
Set the automatic mode
Each of the following functions can be set
to automatic mode.
When the automatic mode is on, the switch
on the screen illuminates.
• Left-hand side seat heater/seat ventila-
tor
• Right-hand side seat heater/seat ventila-
tor
• Heated steering wheel
WARNING
■ To prevent causes of overheating and
minor burn injuries
Observe the following precautions when
using the seat heaters.
● Do not cover the seat with a blanket or
cushion when using the seat heater.
● Do not use seat heater more than nec-
essary.
Control screen
A
B
C
D
317
5-3. Using the interior lights
5
Interior features
5-3.Using the interior lights
Personal lights (P.319)
Front interior light (P.318)
Rear interior light (P.318)
Footwell lights
Outside door handle lights (if equipped)
Door courtesy lights
Auxiliary tray lights (if equipped)
■ Illuminated entry system
The lights automatically turn on/off accord-
ing to the power switch mode, the presence
of the electronic key, whether the doors are
locked/unlocked, and whether the doors
are opened/closed. Also, the brightness of
the lights is automatically adjusted linked
with the shift operation.
■ Personal lights/interior lights auto-
matic on/off
● Illuminated entry system: The lights auto-
matically turn on/off according to power
switch mode, the presence of the elec-
tronic key, whether the doors are
locked/unlocked, and whether the doors
are opened/closed.
● If the interior lights remain on when the
power switch is turned off, the lights will
go off automatically after 20 minutes.
Interior lights list
Location of the interior lights
A
B
C
D
E
F
G
318
5-3. Using the interior lights
■ When front interior light and personal
lights do not respond as normal
● When water, dirt, etc., have adhered to
the lens surface
● When operated with a wet hand
● When wearing gloves, etc.
■ The interior lights will turn on automati-
cally when
If any of the SRS airbags deploy (inflate) or
in the event of a strong rear impact, the
interior lights will turn on automatically. The
interior lights will turn off automatically after
approximately 20 minutes. The interior
lights can be turned off manually. However,
in order to help prevent further collisions, it
is recommended that they be left on until
safety can be ensured. (The interior lights
may not turn on automatically depending
on the force of the impact and conditions of
the collision.)
■ Customization
Setting (e.g. the time elapsed before lights
turn off) can be changed. (Customizable
features: P.470)
■ Turning the door position on
Press the door-linked interior light
switch
The lights are turned on and off according
to whether the doors are opened/closed.
■ Turning the lights on/off
Front
Turns the lights on/off (touch the light)
When a door is opened while the door
position is on, the lights turn on.
Rear
On/off
The rear interior light turn on/off together
the front interior light.
When a door is opened while the door
position is on, the lights turn on.
NOTICE
■ Removing light lenses
Never remove the lens for the front inte-
rior light and personal lights. Otherwise,
the lights will be damaged. If the lens
need to remove, contact your Lexus
dealer.
■ To prevent 12-volt battery discharge
Do not leave the lights on longer than
necessary when the hybrid system is off.
Operating the interior lights
319
5-3. Using the interior lights
5
Interior features
■ Turning the lights on/off
Turns the lights on/off (touch the light)
Operating the personal lights
320
5-4. Using the storage features
5-4.Using the storage features
Auxiliary tray/wireless charger (if equipped) (P.330)
Glove box (P.321)
Bottle holders (P.322)
Cup holders (P.321)
Console box (P.321)
Coin holder (P.322)
List of storage features
Location of the storage features
A
B
C
D
E
F
WARNING
■ Items that should not be left in the
vehicle
Do not leave glasses, lighters or spray
cans in the storage spaces, as this may
cause the following when cabin tempera-
ture becomes high:
● Glasses may be deformed by heat or
cracked if they come into contact with
other stored items.
● Lighters or spray cans may explode. If
they come into contact with other
stored items, the lighter may catch fire
or the spray can may release gas,
causing a fire hazard.
321
5-4. Using the storage features
5
Interior features
1 Open (press the button)
2
Unlock with the mechanical key
3
Lock with the mechanical key
■ Glove box light
The glove box light turns on when the tail
lights are on.
■ Removing the partition
The partition inside the glove box can be
removed by pulling it.
Lift the lid while pushing the button to
release the lock.
The console box can be opened from
either side.
■ Front
■ Rear
Pull down the armrest.
WARNING
■ When storage compartments are not
in use
When driving or when the glove box and
the console box are not in use, keep it
closed.
In the event of sudden braking or sudden
swerving, an accident may occur due to
an occupant being struck by an open lid
or the items stored inside.
Glove box
Console box
Cup holders
322
5-4. Using the storage features
■ Bottle holders
● When storing a bottle, close the cap.
● The bottle may not be stored depending
on its size or shape.
Open the console box. (P.321)
WARNING
■ Items unsuitable for the cup holders
Do not place anything other than cups or
aluminum cans in the cup holders. Other
items may be thrown out of the holders in
the event of an accident or sudden brak-
ing, causing injury. If possible, cover hot
drinks to prevent burns.
Bottle holders
NOTICE
■ Items that should be not stowed in the
bottle holders
Do not place open bottles or glass and
paper cups containing liquid in the bottle
holders. The contents may spill and
glasses may break.
Coin holder
NOTICE
■ Coin holder
Do not insert coins exceeding the height
of the tray. Doing so may prevent open-
ing and closing of the lid.
323
5-4. Using the storage features
5
Interior features
Raise the hooks to use.
The cargo hooks are provided for securing
loose items.
When using the hooks, press the bot-
tom side to lift it up.
Lift the deck board and attach the
string. (P.324) The following items
can be stowed.
2WD models
Towing eyelet
Warning reflector
*
Accessories
*
: The warning reflector itself is not
included as an original equipment.
Luggage compartment fea-
tures
Cargo hooks
WARNING
■ When cargo hooks are not in use
To avoid injury, always return the hooks
to their stowed positions when not in use.
Grocery bag hooks
NOTICE
■ To prevent damage to the grocery
bag hooks
Do not hang any object heavier than 9 lb.
(4 kg) on the grocery bag hooks.
Deck under tray
A
B
C
324
5-4. Using the storage features
AWD models
Towing eyelet
Warning reflector
*
Accessories
*
: The warning reflector itself is not
included as an original equipment.
■ Warning reflector
Depending on the size and shape of the
warning reflector case, you may not be able
to store it.
Center
1 Open the back door.
2 Pull the lever upwards and open
the deck board.
3 Unhook the string on the backside
of the deck board.
4 Attach the string to the luggage
cover hook on the back door.
Deck board
A
B
C
325
5-4. Using the storage features
5
Interior features
5 Remove the deck mat.
Left side
Pull the strap upwards to lift the side
deck board and remove it.
Right side
Pull the strap and fold the side deck
board.
■ When installing the side deck board (left
side)
Insert the claw of the side deck board and
install it.
■ Deck board
The deck board can be stowed to load a tall
luggage.
■ Installing the luggage cover
1
Take out the luggage cover from
the bag.
2
Slowly unfold the luggage cover.
3
Attach the strings to the luggage
cover hooks.
WARNING
■ If the deck boards are opened or
removed
Return them to their original positions
before driving. In the event of sudden
braking, an accident may occur due to an
occupant being struck by the deck
boards or the items stored in the deck
under tray.
NOTICE
■ To prevent damage to the deck board
When closing the back door, do not
leave the deck board string attached to
the hook.
Luggage cover
326
5-4. Using the storage features
Make sure that the side the strings are
sewn faces down.
■ Stowing the luggage cover
1
Hold the luggage cover corners of
the side with the long strings.
2
Fold it in half.
3 Turn your wrists to fold it.
4
Put it in the bag.
■ When removing the luggage cover
Pull the short strings toward you and
unhook them.
WARNING
■ When removing and unfolding the
luggage cover
Observe the following precautions. Fail-
ure to do so may cause the luggage
cover to suddenly unfold, resulting in
injury.
● When taking out the luggage cover
from the bag, securely hold the edges
of the luggage cover and slowly take it
out.
327
5-4. Using the storage features
5
Interior features
WARNING
● When unfolding the luggage cover,
hold it securely in both hands and
slowly unfold it.
● Do not unfold the luggage cover near
your face.
● When unfolding the luggage cover, do
not release your hand from the cover.
● Do not unfold the luggage cover near
other people.
■ When installing the luggage cover
Observe the following precautions. Fail-
ure to do so may cause an accident.
● Make sure that the rear edge of the
luggage cover is laying flat to prevent
the driver’s view from being
obstructed.
● Make sure to attach the strings cor-
rectly.
NOTICE
■ When using the luggage cover
● Do not place anything on the luggage
cover. Doing so may deform the lug-
gage cover.
● Do not open or close the back door
with the strings unhooked. Doing so
may cause damage to the luggage
cover.
● Do not hook anything other than the
luggage cover and deck board strings
on the luggage cover hooks. The
hooks and back door may be dam-
aged.
328
5-5. Using the other interior features
5-5.Using the other interior feature s
1 To set the visor in the forward posi-
tion, flip it down.
2
To set the visor in the side position,
flip down, unhook, and swing it to
the side.
3
To use the side extender, place the
visor in the side position, then slide
it backward.
■ When adjusting the inside rear view mir-
ror
Adjust the inside rear view mirror to enable
sufficient confirmation of the rear view with-
out interfering with the sun visor.
Slide the cover to open.
The light turns on when the cover is
opened.
■ Vanity lights
If the vanity lights remain on when the
power switch is turned off, the lights will go
off automatically after 20 minutes.
Please use a power supply for elec-
tronic goods that use less than 12
VDC/10 A (power consumption of
120 W).
When using electronic goods, make
sure that the power consumption of all
the connected power outlets is less
than 120 W.
Inside of the console box
Lift the lid while pushing the button to
release the lock.
The console box can be opened from
either side.
Other interior features
Sun visors
NOTICE
■ To prevent damage to the sun visors
When using the side extender, do not
swing the visor to the front.
Vanity mirrors
NOTICE
■ To prevent 12-volt battery discharge
Do not leave the vanity lights on for
extended periods while the hybrid sys-
tem is off.
Power outlet
329
5-5. Using the other interior features
5
Interior features
Open the lid.
Rear
Open the lid.
■ The power outlet can be used when
The power switch is in ACC or ON.
■ When stopping the hybrid system
Disconnect electrical devices with charging
functions, such as mobile battery packs.
If such devices are left connected, the
hybrid system may not stop normally.
The USB Type-C charging ports are
used to supply 3.0 A of electricity at 5
V to external devices.
The USB Type-C charging ports are
for charging only. They are not
designed for data transfer or other
purposes.
Depending on the external device, it
may not charge properly. Refer to the
manual included with the device
before using a USB charging port.
NOTICE
■ When power outlet is not in use
To avoid damaging the power outlet,
close the power outlet lid when the
power outlet is not in use.
Foreign objects or liquids that enter the
power outlet may cause a short circuit.
■ To prevent 12-volt battery discharge
Do not use the power outlet longer than
necessary when the hybrid system is off.
■ To prevent incorrect operation of the
vehicle
When turning the power switch off, make
sure to disconnect accessories designed
for charging, such as portable chargers,
power banks, etc. from the power out-
lets.
If such an accessory is left connected, the
following may occur:
● The doors will not be able to be
locked.
● The opening screen will be displayed
on the multi-information display.
● The interior lights, instrument panel
lights, etc. will illuminate.
USB Type-C charging ports
330
5-5. Using the other interior features
■ Using the USB Type-C charging
ports
Front
Rear side of the console box
Open the lid.
■ The USB Type-C charging ports can be
used when
The power switch is in ACC or ON.
■ Situations in which the USB Type-C
charging ports may not operate cor-
rectly
● If a device which consumes more than
3.0 A at 5 V is connected
● If a device designed to communicate with
a personal computer, such as a USB
memory device, is connected
● If the connected external device is turned
off (depending on device)
● If the temperature inside the vehicle is
high, such as after the vehicle has been
parked in the sun
■ About connected external devices
Depending on the connected external
device, charging may occasionally be sus-
pended and then start again. This is not a
malfunction.
A portable device can be charged by
just placing Qi standard wireless
charge compatible portable devices
according to the Wireless Power Con-
sortium, such as smartphones and
NOTICE
■ To prevent damage to the USB Type-
C charging ports
● Do not insert foreign objects into the
ports.
● Do not spill water or other liquids into
the ports.
● Rear side of console box: When the
USB Type-C charging ports are not in
use, close the lids. If a foreign object or
liquid enters a port may cause a short
circuit.
● Do not apply excessive force to or
impact the USB Type-C charging
ports.
● Do not disassemble or modify the USB
Type-C charging ports.
■ To prevent damage to external
devices
● Do not leave external devices in the
vehicle. The temperature inside the
vehicle may become high, resulting in
damage to an external device.
● Do not push down on or apply unnec-
essary force to an external device or
the cable of an external device while it
is connected.
■ To prevent 12-volt battery discharge
Do not use the USB Type-C charging
ports for a long period of time with the
hybrid system stopped.
Wireless charger (if equipped)
331
5-5. Using the other interior features
5
Interior features
mobile batteries, etc., on the charge
area.
The compatible portable devices can
be found on the following Wireless
Power Consortium website.
This function cannot be used with por-
table devices that cannot be placed on
the wireless charger. Also, depending
on the portable device, it may not
operate as normal. Please read the
operation manual for portable devices
to be used.
■ The “Qi” logo
The “Qi” logo is a trademark of the
Wireless Power Consortium.
■ Name for all parts
Operation indicator light
Charge area
*
Charging tray
Approximately 3.9 in. (10 cm)
Approximately 1.0 in. (2.5 cm)
*
: The charging coil in the wireless charger
can be moved within the charge area up
to the position of the charging coil inside
a portable device. Charging is possible if
the center of the coil of the portable
device is placed within the charge area.
If 2 or more portable devices are placed
on the wireless charger, their charging
coils may not be properly detected and
they may not be charged.
■ Using the wireless charger
Place the portable device on the wire-
less charger.
Place the charging side of the portable
device down with the center of the device
in the center of the charge area.
A
B
C
D
E
332
5-5. Using the other interior features
When charging, the operation indicator
light (orange) on the wireless charger
comes on.
Refer to “Situations in which the function
may not operate normally” (P.336)
when charging is not performed.
When charging is complete, the operation
indicator light (green) on the wireless char-
ger comes on.
■ Recharging function
When charging is complete and
after a fixed time in the charge sus-
pension state, charging restarts.
When a portable device is moved
significantly in the charge area, the
charging coil is disconnected and
charging is stopped momentarily.
However, if there is the center of a
charging coil in the charge area, the
charging coil inside the wireless
charger will move toward it and
then charging restarts. If the porta-
ble device is moved to somewhere
outside of the charge area, charging
will stop. Place the portable device
near the center of the charge area.
■ Rapid charging function
The following portable devices sup-
port rapid charging.
• Portable devices compliant with WPC
Ver1.3.2 and compatible with rapid
charging
• iPhone’s with an iOS version that sup-
ports 7.5 W charging (iPhone 8 and
later models)
• Portable devices compatible with Gal-
axy original rapid charging standard.
When a portable device that sup-
ports rapid charging is charged,
charging automatically switches to
the rapid charging function.
■ Lighting conditions of operation indicator light
*1
: Charging power will not be output during standby. A metallic object will not be heated,
if it is placed on the wireless charger in this state.
*2
: Depending on the portable device, there are cases where the operation indicator light
Operation indicator light
Conditions
Charging tray side Center display side
Turning off Disappear
When power for Multimedia is off or the
power switch is off
Green (comes on) Gray
On Standby (charging possible state)
*1
When charging is complete
*2
Orange (comes on) Blue Charging
333
5-5. Using the other interior features
5
Interior features
will continue being lit up orange even after the charging is complete.
■ When the wireless charger does not operate properly
When the wireless charger does not operate properly, handle the probable cause
based on the following tables.
Operation indicator light
Suspected causes/Handling method
Charging tray side Center display side
Orange (Flashing
repeatedly once
every second)
Gray
Vehicle to wireless charger communication
failure
If the hybrid system is operating, stop and
then restart the hybrid system.
If the power switch is in ACC, start the hybrid
system. (P.177)
Green (Flashing
repeatedly once
every second)
Disappear
*
Wireless charger and multimedia system
communication failure
If the hybrid system is operating, stop and
then restart the hybrid system.
If the power switch is in ACC, start the hybrid
system. (P.177)
Green (comes on) Blue
AM radio stations are being automatically
selected (if equipped)
Wait until the system has completed the
automatic selection of AM radio stations.
In the case that automatic selection can-
not be completed, stop automatic selec-
tion.
The smart access system with push-button is
detecting the electronic key.
Wait until electronic key detection has
completed.
334
5-5. Using the other interior features
Green (comes on) Gray
Foreign substance detection:
The abnormal heating prevention function
for foreign substances operated due to the
presence of a metallic foreign substance in
the charge area
Remove the foreign substance from the
charge area.
Portable device misaligned / distanced from
charging surface:
The center of charging coil in the portable
device moved outside of the charging area,
or lens convex is large, or case is thick so the
abnormal heating prevention function oper-
ated
Remove the portable device from the
wireless charger, after 5 seconds, then
place the portable device so that it is near
the center of the wireless charger. Also, if
a case or cover is installed to the portable
device, remove it.
Operation indicator light
Suspected causes/Handling method
Charging tray side Center display side
335
5-5. Using the other interior features
5
Interior features
*
: Depending on the abnormal condition, the Center display may be gray.
■ The wireless charger can be operated
when
The power switch is in ACC or ON.
■ Usable portable devices
● Devices compatible with wireless
charging Qi standards can be used.
However, compatibility with portable
devices that comply with Qi Ver. 1.0,
1.3.2 and later versions is not guaranteed.
● Starting with mobile phones and smart-
phones, it is aimed for low power electri-
cally supplied portable devices of no
more than 5W.
● However, charging exceeding 5 W is
supported by the following portable
devices.
• Charging at 7.5 W or less is supported
by iPhone’s that support 7.5 W charging.
• Charging at 10 W or less is supported by
Galaxy device that support 10 W
charging of original standard.
• Charging at 15 W or less is supported by
portable devices compliant with EPP out-
put as defined by WPC standard
Ver1.3.2.
■ Using the smart access system with
push-button
If the smart access system with push-button
detects the electronic key while a device is
being charged, charging will be temporarily
stopped. When the electronic key is
detected, charging will automatically start
again.
■ When covers and accessories are
attached to portable devices
Do not charge in situations where cover
and accessories not able to handle Qi are
attached to the portable device. Depending
on the type of cover (including for certain
Green (comes on) Gray
Battery protection function of portable
device:
Before full charging, battery protection
function of portable device operated
Confirm the setting of portable device.
Continued detection of an electronic key:
When a Multimedia function is used through
vehicle customization, the electronic key is
continually detected without being con-
firmed.
In this case, turn the power switch ACC
or ON to confirm the key.
Orange (Repeat-
edly flashes 4 times
continuously)
Gray
Safety shutdown resulting when the tem-
perature within the wireless charger
exceeded the set value
Stop charging, remove the portable
device from the wireless charger, wait for
the temperature to drop, and then start
charging again.
Operation indicator light
Suspected causes/Handling method
Charging tray side Center display side
336
5-5. Using the other interior features
genuine manufacturer parts) and acces-
sory, it may not be possible to charge.
When charging is not performed even with
the portable device placed on the charge
area, remove the cover and accessories.
■ AM radio cooperation function during
charging
● When noise enters the AM radio during
charging, charging frequency will be
automatically changed to reduce noise.
● During the AM radio automatic tuning,
charging is temporarily stopped in order
to prevent tuning error due to noise
caused by charging. When tuning is fin-
ished, charging will be automatically
resumed.
■ Important points of the wireless charger
● If the electronic key cannot be detected
within the vehicle interior, charging can-
not be done. When the door is opened
and closed, charging may be temporarily
suspended.
● When charging, the wireless charging
device and portable device will get
warmer, however this is not a malfunc-
tion.
When a portable device gets warm while
charging, charging may stop due to the
protection function on the portable
device side. In this case, when the tem-
perature of the portable device drops
significantly, charge again.
The fan may start operating to lower the
temperature inside the wireless charger,
however this is not a malfunction.
■ Operation sounds
A buzzing noise may be heard when press-
ing the power switch to turn to ACC or ON
or when detecting a portable device. How-
ever, this is not a malfunction.
■ Cleaning the wireless charger
P.350
■ Situations in which the function may not
operate normally
Devices may not be charged normally in
the following situations.
● The portable device is fully charged
● The portable device is being charged
with a cable connected
● There is foreign matter between the
charge area and portable device
● Charging has caused the portable device
to heat up
● The temperature around the wireless
charger is 95°F (35°C) or higher, such
as in extreme heat
● The portable device is placed with its
charging surface facing up
● The small portable device such as fold-
able type is placed in an area misaligned
from the charge area
● The portable device is larger than the
charging tray
● The vehicle is in an area where strong
electrical waves or noise are emitted,
such as near a television tower, power
plant, gasoline station, broadcasting sta-
tion, large display, airport, etc.
● The electronic key is not inside the vehi-
cle
● Any of the following is stuck or installed
between the charging side of the porta-
ble device and the charge area.
• Thick cases or covers
• A case or cover attached with an uneven
or tilted surface, so that the charging side
is not flat
• Thick decorations
• Accessories, such as finger rings, straps,
etc.
● When there is a gap between the
charging side of the portable device and
the charge area due to a protrusion such
as a camera on the charging side of the
portable device.
● When the portable device is in contact
with, or is covered by any of the following
metallic objects:
• A card that has metal on it, such as alumi-
num foil, etc.
• A pack of cigarettes that includes alumi-
num foil
• A wallet or bag that is made of metal
• Coins
• A heating pad
• CDs, DVDs or other media
• A metal accessory
337
5-5. Using the other interior features
5
Interior features
• A case or cover made of metal
• A flip type case with a magnet on the
charging side of the portable device
● Electric wave type wireless remote con-
trols are being used nearby
● 2 or more portable devices are placed on
the wireless charger at the same time
● If you use a device with a built-in S-Pen
(Galaxy Note series, etc.) and the device
with the S-Pen inserted is on the tray.
If charging is abnormal or the operation
indicator light continues to flash for any
other reason, the wireless charger may be
malfunctioning. Contact any authorized
Lexus retailer or Lexus authorized repairer,
or any reliable repairer.
■ If the smartphone OS has been updated
If the smartphone OS has been updated to
a newer version, its charging specifications
may have changed significantly. For details,
check the information on the manufac-
turer’s website.
■ Trademark information
● iPhone is a trademark of Apple Inc., reg-
istered in the U.S. and other countries.
● Galaxy is a trademark or registered
trademark of Samsung Electronics
Co.,Ltd.
WARNING
■ Caution while driving
When charging a portable device, for
safety reasons, the driver should not
operate the main part of the portable
device while driving.
■ Precautions for when driving
Do not charge small, lightweight porta-
ble devices, such as wireless earbuds,
while driving. Lightweight devices may
fly off of the charging tray, possibly lead-
ing to an accident.
■ Caution regarding interference with
electronic devices
People with implantable cardiac pace-
makers, cardiac resynchronization ther-
apy-pacemakers or implantable
cardioverters, as well as any other elec-
trical medical device, should consult their
physician about the usage of the wireless
charger.
■ To prevent malfunctions or burns
Observe the following precautions. Fail-
ure to do so may result in a equipment
failure and damage, catch fire, burns due
to overheat or electric shock.
● Do not insert any metallic objects
between the charge area and the por-
table device while charging
● Do not attach an aluminum sticker or
other metallic object to the charge
area
● Do not attach an aluminum sticker or
other metallic object to the side of the
portable device (or to its case or
cover) that touches the charge area
● Do not store items on the wireless
charger instead of in an auxiliary box
● Do not subject to a strong force or
impact
● Do not disassemble, modify or remove
● Do not charge devices other than
specified portable devices
● Keep away from magnetic items
● Do not perform charging if the
charging area is dirty
● Do not cover with a cloth or similar
material
338
5-5. Using the other interior features
Fold down the armrest for use.
The coat hooks are provided with the
rear assist grips.
An assist grip installed on the ceiling
can be used to support your body
while sitting on the seat.
NOTICE
■ To prevent malfunctions and data
corruptions
● When charging, bringing a credit, or
other magnetic card, or magnetic stor-
age media close to the charge area
may clear any stored data due to mag-
netic influence. Also, do not bring a
wristwatch or other precision instru-
ment close to the charge area since
doing so may cause it to malfunction.
● Do not charge with a non-contact IC
card such as a transportation system
IC card inserted between the charging
side of a portable device and the
charge area. The IC chip may become
extremely hot and damage the porta-
ble device or IC card. Be especially
careful not to charge a portable device
inside a case or cover with a non-con-
tact IC card attached.
● Do not leave portable devices inside
the vehicle. The inside of the vehicle
can become hot in extreme heat,
which could cause a malfunction.
■ To prevent 12-volt battery discharge
Do not use the wireless charger for a
long period of time when the hybrid sys-
tem is stopped.
Armrest
NOTICE
■ To prevent damage to the armrest
Do not apply too much load on the arm-
rest.
Coat hooks
WARNING
■ Items that must not be hung on the
hook
Do not hang coat hangers or other hard
or sharp objects on the hook. If the SRS
curtain shield airbags deploy, these items
may become projectiles, causing death
or serious injury.
Assist grips
339
5-5. Using the other interior features
5
Interior features
*
: If equipped
■ HomeLink
®
programming procedure
The programming procedures can also be
found at the following URL.
Website: www.homelink.com/lexus
For support, contact customer support at
the following.
Help Line: 1-800-355-3515
The HomeLink
®
wireless control sys-
tem in your vehicle has 3 buttons
which can be programmed to operate
3 different devices. Refer to the pro-
gramming methods on the following
pages to determine the method which
is appropriate for the device.
WARNING
■ Assist grips
Do not use the assist grip when getting in
or out of the vehicle or rising from your
seat.
NOTICE
■ To prevent damage to the assist grip
Do not hang any heavy object or put a
heavy load on the assist grip.
Garage door opener
*
The garage door opener can be
programmed using the
HomeLink
®
to operate garage
doors, gates, entry doors, door
locks, home lighting systems, secu-
rity systems, and other devices.
System components
340
5-5. Using the other interior features
HomeLink
®
indicator light
Garage door operation indicators
HomeLink
®
icon
Illuminates while HomeLink
®
is operating.
Buttons
■ Codes stored in the HomeLink
®
mem-
ory
● The registered codes are not erased
even if the 12-volt battery cable is discon-
nected.
● If learning failed when registering a dif-
ferent code to a HomeLink
®
button that
already has a code registered to it, the
already registered code will not be
erased.
■ Before programming HomeLink
®
During programming, it is possible
that garage doors, gates, or other
devices may operate. For this rea-
son, make sure that people and
objects are clear of the garage door
or other devices to prevent injury or
other potential harm.
It is recommended that a new bat-
tery be placed in the remote control
transmitter for more accurate pro-
gramming.
Garage door opener motors manu-
factured after 1995 may be
equipped with rolling code protec-
tion. If this is the case, you may need
a stepladder or other sturdy, safe
device to reach the “Learn” or
“Smart” button on the garage door
opener motor.
WARNING
■ When programming a garage door
or other remote control device
The garage door or other device may
operate, so ensure people and objects
are out of danger to prevent potential
harm.
A
B
C
D
■ Conforming to federal safety stan-
dards
Do not use the HomeLink
®
compatible
transceiver with any garage door opener
or device that lacks safety stop and
reverse features as required by federal
safety standards.
This includes any garage door that can-
not detect an interfering object. A door
or device without these features
increases the risk of death or serious
injury.
■ When operating or programming
HomeLink
®
Never allow a child to operate or play
with the HomeLink
®
buttons.
Programming the HomeLink
®
341
5-5. Using the other interior features
5
Interior features
■ Programming HomeLink
®
Steps
1 through 3 must be performed
within 60 seconds, otherwise the indi-
cator light will stop flashing and pro-
gramming will not be able to be
completed.
1 Press and release the HomeLink
®
button you want to program and
check that the HomeLink
®
indica-
tor light flashes (orange).
2 Point the remote control transmit-
ter for the device at the rear view
mirror, 1 to 3 in. (25 to 75 mm)
from the HomeLink
®
buttons.
Keep the HomeLink
®
indicator light in
view while programming.
3 Program a device.
Programming a device other than
an entry gate (for U.S.A. owners)
Press and hold the remote control
transmitter button until the
HomeLink
®
indicator light changes
from slowly flashing orange to rapidly
flashing green (rolling code) or contin-
uously lit green (fixed code), then
release the button.
Programming an entry gate (for
U.S.A. owners)/Programming a
device in the Canadian market
Press and release the remote control
transmitter button at 2 second inter-
vals, repeatedly, until the HomeLink
®
indicator light changes from slowly
flashing (orange) to rapidly flashing
(green) (rolling code) or continuously
lit (green) (fixed code).
4 Test the HomeLink
®
operation by
pressing the newly programmed
button and observing the indicator
light:
Indicator light illuminates: Program-
ming of a fixed code device has
completed. The garage door or
other device should operate when a
HomeLink
®
button is pressed and
released.
Indicator light flashes rapidly: The
garage door opener motor or other
device is equipped with a rolling
code. To complete programming,
firmly press and hold the
HomeLink
®
button for 2 seconds
then release it.
If the garage door or other device
does not operate, proceed to “Pro-
gramming a rolling code system”.
342
5-5. Using the other interior features
5 Repeat the steps above to program
another device for any of the
remaining HomeLink
®
buttons.
■ Programming a rolling code sys-
tem
2 or more people may be necessary to
complete rolling code programming.
1 Locate the “Learn” or “Smart” but-
ton on the garage door opener
motor in the garage.
This button can usually be found where the
hanging antenna wire is attached to the
unit. The name and color of the button may
vary by manufacturer. Refer to the owner’s
manual supplied with the garage door
opener motor for details.
2 Press and release the “Learn” or
“Smart” button.
Perform 3 within 30 seconds after
performing
2.
3 Press and hold the desired
HomeLink
®
button (inside the
vehicle) for 2 seconds and release
it. Repeat this sequence
(press/hold/release) up to 3 times
to complete programming.
If the garage door opener motor
operates when the HomeLink
®
button is pressed, the garage door
opener motor recognizes the
HomeLink
®
signal.
■ Enabling 2-way communication
with a garage door (only available
for compatible devices)
When enabled, 2-way communication
allows you to check the status of the
opening and closing of a garage door
through indicators in your vehicle.
2-way communication is only available
if the garage door opener motor used
is a compatible device. (To check
device compatibility, refer to
1 Within 5 seconds after program-
ming the garage door opener has
been completed, if the garage door
opener motor is trained to
HomeLink
®
, both garage door
operation indicators will flash rap-
idly (green) and the light on the
garage door opener motor will
343
5-5. Using the other interior features
5
Interior features
blink twice, indicating that 2-way
communication is enabled.
If the indicators do not flash, perform
2 and
3 within the first 10 presses of the
HomeLink
®
button after programming
has been completed.
2 Press a programmed HomeLink
®
button to operate a garage door.
3 Within 1 minute of pressing the
HomeLink
®
button, after the
garage door operation has
stopped, press the “Learn” or
“Smart” button on the garage door
opener motor. Within 5 seconds of
the establishment of 2-way com-
munication with the garage door
opener, both garage door opera-
tion indicators in the vehicle will
flash rapidly (green) and the light
on the garage door opener motor
will blink twice, indicating that 2-
way communication is enabled.
■ Reprogramming a single
HomeLink
®
button
When the following procedure is per-
formed, buttons which already have
devices registered to them can be
overwritten:
1 With one hand, press and hold the
desired HomeLink
®
button.
2 When the HomeLink
®
indicator
starts flashing (orange), continue to
hold the HomeLink
®
button and
perform “Programming
HomeLink
®
”
1 (it takes 20 sec-
onds for the HomeLink
®
indicator
to start flashing).
■ Before programming
● Install a new battery in the transmitter.
● The battery side of the transmitter must
be pointed away from the HomeLink
®
.
Press the appropriate HomeLink
®
button. The HomeLink
®
indicator light
should turn on.
The status of the opening and closing
of a garage door is shown by the indi-
cators.
Opening
Closing
This function is only available if the garage
door opener motor used is a compatible
device. (To check device compatibility,
refer to .)
The indicators can operate within
approximately 820 ft. (250 m) of the
Operating HomeLink
®
Color Status
Orange (flashing)
Currently open-
ing/closing
Green
Opening/closing
has completed
Red (flashing)
Feedback signals
cannot be received
A
B
344
5-5. Using the other interior features
garage door. However, if there are
obstructions between the garage door
and the vehicle, such as houses and
trees, feedback signals from the
garage door may not be received.
To recall the previous door operation
status, press and release either
HomeLink
®
buttons and
or and simulta-
neously. The last recorded status will
be displayed for 3 seconds.
Press and hold the 2 outside buttons
for 10 seconds until the HomeLink
®
indicator light changes from continu-
ously lit (orange) to rapidly flashing
(green).
If you sell your vehicle, be sure to erase the
programs stored in the HomeLink
®
mem-
ory.
Erasing the entire HomeLink
®
memory (all three codes)

Popular Owner Manuals