2019-2026 Lexus UX SUV Specifications -> Lubrication system (Engine oil) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Specifications -> Lubrication system (Engine oil) for Your Lexus UX SUV First Generation (2019-2026)

444
8-1. Specifications
Front
Rear (AWD models)
■ Oil capacity (Drain and refill [Ref-
erence
*
])
*
: The engine oil capacity is a reference
quantity to be used when changing the
engine oil. When actually adding the
engine oil, make sure that the oil level is
between the low level mark and refill
upper limit mark (P.362). Warm up
the engine and turn off the hybrid sys-
tem, wait about 5 minutes, and check the
oil level on the dipstick.
■ Engine oil selection
“Toyota Genuine Motor Oil” is used in
your Lexus vehicle. Use Lexus
approved “Toyota Genuine Motor
Oil” or equivalent to satisfy the follow-
ing grade and viscosity.
Oil grade:
JASO GLV-1
Recommended viscosity:
SAE 0W-8
SAE 0W-8 is the best choice for good
fuel economy and good starting in cold
weather.
Electric motor (traction motor)
Type Permanent magnet synchronous motor
Maximum output 83 kW
Maximum torque 151.9 ft•lbf (206 N•m, 21.0 kgf•m)
Type Permanent magnet synchronous motor
Maximum output 30 kW
Maximum torque 62.0 ft•lbf (84 N•m, 8.6 kgf•m)
Hybrid battery (traction battery)
Type Lithium-ion battery
Voltage 3.7 V/cell
Capacity 4.08 Ah
Quantity 60 Cells
Nominal voltage 222 V
Lubrication system
With filter 4.1 qt. (3.9 L, 3.4 Imp. qt.)
Without filter 3.7 qt. (3.5 L, 3.1 Imp. qt.)
445
8-1. Specifications
8
Vehicle specifications
If SAE 0W-8 is not available, SAE
0W-16 oil may be used. However, it
must be replaced with SAE 0W-8 at
the next oil change.
Outside temperature
Oil viscosity (0W-8 is explained here
as an example):
• The 0W in 0W-8 indicates the
characteristic of the oil which allows
cold startability. Oils with a lower
value before the W allow for easier
starting of the engine in cold
weather.
• The 8 in 0W-8 indicates the viscos-
ity characteristic of the oil when the
oil is at high temperature. An oil with
a higher viscosity (one with a higher
value) may be better suited if the
vehicle is operated at high speeds,
or under extreme load conditions.
How to read oil container label:
The Japanese Automotive Standards
Organization (JASO) GLV-1 mark is
added to some oil containers to help
you select the oil you should use.
*
: The coolant capacity is a reference quantity.
If replacement is necessary, contact your Lexus dealer.
A
Cooling system
Capacity
*
Gasoline
engine
6.4 qt. (6.1 L, 5.4 .)
Power con-
trol unit
1.7 qt. (1.6 L, 1.4 .)
Coolant type
Use either of the following:
• “Toyota Super Long Life Coolant”
• Similar high-quality ethylene glycol-based non-
silicate, non-amine, non-nitrite, and non-borate
coolant with long-life hybrid organic acid tech-
nology
Do not use plain water alone.

Related Topics

Popular Owner Manuals