2019-2026 Lexus UX SUV Steps to take in an emergency -> If your vehicle needs to be towed User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Steps to take in an emergency -> If your vehicle needs to be towed for Your Lexus UX SUV First Generation (2019-2026)

405
7-2. Steps to take in an emergency
7
When trouble arises
7-2.Steps to take in an emergency
In the following situations, it is not pos-
sible to be towed by another vehicle
using cables or chains, as the front
wheels may be locked due to the park-
ing lock. Contact your Lexus dealer or
commercial towing service.
There is a malfunction in the shift
control system. (P.179, 420)
There is a malfunction in the immo-
bilizer system. (P.71)
There is a malfunction in the smart
access system with push-button
start. (P.430)
The 12-volt battery is discharged.
(P.432)
The following may indicate a problem
with your transmission. Contact your
Lexus dealer or commercial towing
service before towing.
The hybrid system warning message
is shown on the multi-information
display and the vehicle does not
move.
The vehicle makes an abnormal
sound.
From the front (2WD models)
Release the parking brake.
Turn automatic mode off. (P.193)
From the front (AWD models)
Use a towing dolly under the rear
wheels.
If your vehicle needs to be
towed
If towing is necessary, we recom-
mend having your vehicle towed by
your Lexus dealer or commercial
towing service, using a wheel-lift
type truck or flatbed truck.
Use a safety chain system for all
towing, and abide by all state/pro-
vincial and local laws.
Situations when it is not possible
to be towed by another vehicle
Situations when it is necessary to
contact dealers before towing
Towing with a wheel-lift type
truck
406
7-2. Steps to take in an emergency
From the rear
Use a towing dolly under the front
wheels.
WARNING
Observe the following precautions.
Failure to do so may result in death or
serious injury.
■ When towing the vehicle
2WD models
Be sure to transport the vehicle with the
front wheels raised or with all four wheels
raised off the ground. If the vehicle is
towed with the front wheels contacting
the ground, the drivetrain and related
parts may be damaged or electricity
generated by the operation of the motor
may cause a fire to occur depending on
the nature of the damage or malfunction.
AWD models
Be sure to transport the vehicle with all
four wheels raised off the ground. If the
vehicle is towed with the tires contacting
the ground, the drivetrain or related
parts may be damaged, the vehicle may
fly off the truck, or electricity generated
by the operation of the motor may cause
a fire to occur depending on the nature
of the damage or malfunction.
NOTICE
■ To prevent damage to the vehicle
when towing using a wheel-lift type
truck
When raising the vehicle, ensure ade-
quate ground clearance for towing at the
opposite end of the raised vehicle. With-
out adequate clearance, the vehicle
could be damaged while being towed.
407
7-2. Steps to take in an emergency
7
When trouble arises
When using a flat-bed truck to trans-
port the vehicle, use tire strapping
belts. Refer to the owner’s manual of
the flat-bed truck for the tire strapping
method.
In order to suppress vehicle movement
during transportation, set the parking
brake and turn the power switch off.
If a tow truck is not available in an
emergency, your vehicle may be tem-
porarily towed using cables or chains
secured to the emergency towing eye-
let. This should only be attempted on
hard surfaced roads for short distances
at under 18 mph (30 km/h).
A driver must be in the vehicle to steer
and operate the brakes. The vehicle’s
wheels, drivetrain, axles, steering and
brakes must be in good condition.
To have your vehicle towed by another
vehicle, the towing eyelet must be
installed to your vehicle. Install the tow-
ing eyelet using the following proce-
dure.
1
Take out the towing eyelet.
(P.323, 380)
2
Remove the eyelet cover using a
flathead screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the vehicle
body as shown in the illustration.
3 Insert the towing eyelet into the
hole and tighten partially by hand.
NOTICE
■ Towing with a sling-type truck
Do not tow with a sling-type truck to pre-
vent body damage.
Using a flatbed truck
Emergency towing
Emergency towing procedure
408
7-2. Steps to take in an emergency
4 Tighten down the towing eyelet
securely using a hard metal bar.
5
Securely attach cables or chains to
the towing eyelet.
Take care not to damage the vehicle body.
6 Enter the vehicle being towed and
start the hybrid system.
If the hybrid system does not start, turn the
power switch to ON.
7 Shift the shift position to N and
release the parking brake.
Turn automatic mode off. (P.193)
■ While towing
If the hybrid system is off, the power assist
for the brakes and steering will not function,
making steering and braking more difficult.
■ Wheel nut wrench
Wheel nut wrench can be purchased at
your Lexus dealer.
WARNING
Observe the following precautions. Fail-
ure to do so may result in death or seri-
ous injury.
■ While towing
● When towing using cables or chains,
avoid sudden starts, etc. which place
excessive stress on the towing eyelet,
cables or chains. The towing eyelet,
cables or chains may become dam-
aged, broken debris may hit people,
and cause serious damage.
● Do not perform any of the following as
doing so may cause the parking lock
mechanism to engage, locking the
front wheels and possibly leading to an
accident resulting in death or serious
injury:
• Unfasten the driver’ seat belt and open
the driver’ door.
• Turn the power switch off.
■ Installing towing eyelets to the vehi-
cle
Make sure that towing eyelets are
installed securely.
If not securely installed, towing eyelets
may come loose during towing.
NOTICE
■ To prevent damage to the vehicle
during emergency towing
Do not secure cables or chains to the
suspension components.

Related Topics

Popular Owner Manuals