
74
1-5. Theft deterrent system
intrusions.
■ Setting the intrusion sensor and tilt
sensor
The intrusion sensor and tilt sensor will
be set automatically when the alarm is
set. (P.72)
■ Canceling the intrusion sensor and
tilt sensor
If you are leaving pets or other moving
things inside the vehicle, make sure to
disable the intrusion sensor and tilt
sensor before setting the alarm, as they
will respond to movement inside the
vehicle.
1 Turn the power switch off.
2 Press the intrusion sensor and tilt
sensor cancel switch.
Press the switch again to re-enable the
intrusion sensor and tilt sensor.
A message will be shown on the multi-
information display in the instrument clus-
ter.
The intrusion sensor and tilt sensor will
revert to on each time the power switch is
turned to ON.
■ Canceling and automatic re-enabling of
the intrusion sensor and tilt sensor
● The alarm will still be set even when the
intrusion sensor and tilt sensor are can-
celed.
● After the intrusion sensor and tilt sensor
are canceled, pressing the power switch
or unlocking the doors using the entry
function or wireless remote control will
re-enable the intrusion sensor and tilt
sensor.
● The intrusion sensor and tilt sensor will
automatically be re-enabled when the
alarm system is deactivated.
■ Intrusion sensor detection consider-
ations
The sensor may trigger the alarm in the fol-
lowing situations:
● People or pets are in the vehicle.
● A window or the moon roof (if equipped)
is open.
In this case, the sensor may detect the fol-
lowing:
• Wind or the movement of objects such as
leaves and insects inside the vehicle
• Ultrasonic waves emitted from devices
such as the intrusion sensors of other
vehicles
• The movement of people outside the
vehicle
● Small insects such as moths or flies are in
the vehicle.
● Unstable items, such as dangling acces-
sories or clothes hanging on the coat
hooks, are in the vehicle.