2019-2026 Lexus UX SUV When trouble arises User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

When trouble arises for Your Lexus UX SUV First Generation (2019-2026)

401
7
7
When trouble arises
When trouble arises
7-1. Essential information
Emergency flashers..................
402
If your vehicle has to be stopped
in an emergency.....................
402
If the vehicle is submerged or
water on the road is rising ..
403
7-2. Steps to take in an emergency
If your vehicle needs to be towed
........................................................
405
If you think something is wrong
........................................................
409
If a warning light turns on or a
warning buzzer sounds ........
410
If a warning message is displayed
.........................................................
419
If you have a flat tire..................426
If the hybrid system will not start
........................................................
427
If you lose your keys.................428
If the fuel filler door cannot be
opened........................................
429
If the electronic key does not
operate properly ....................
430
If the 12-volt battery is discharged
........................................................
432
If your vehicle overheats........436
If the vehicle becomes stuck 439
402
7-1. Essential information
7-1.Essential information
Press the switch.
All the turn signal lights will flash. To turn
them off, press the switch once again.
■ Emergency flashers
● If the emergency flashers are used for a
long time while the hybrid system is not
operating (while the “READY” indicator
is not illuminated), the 12-volt battery may
discharge.
● If any of the SRS airbags deploy (inflate)
or in the event of a strong rear impact, the
emergency flashers will turn on automati-
cally. The emergency flashers will turn off
automatically after operating for approxi-
mately 20 minutes. To manually turn the
emergency flashers off, press the switch
twice. (The emergency flashers may not
turn on automatically depending on the
force of the impact and conditions of the
collision.)
1 Steadily step on the brake pedal
with both feet and firmly depress it.
Do not pump the brake pedal repeatedly
as this will increase the effort required to
slow the vehicle.
2 Shift the shift lever to N.
If the shift lever is shifted to N
3 After slowing down, stop the vehi-
cle in a safe place by the road.
4 Stop the hybrid system.
If the shift lever cannot be shifted to
N
3 Keep depressing the brake pedal
with both feet to reduce vehicle
speed as much as possible.
4 To stop the hybrid system, press
and hold the power switch for 2
consecutive seconds or more, or
Emergency flashers
The emergency flashers are used to
warn other drivers when the vehi-
cle has to be stopped in the road
due to a breakdown, etc.
Operating instructions
If your vehicle has to be
stopped in an emergency
Only in an emergency, such as if it
becomes impossible to stop the
vehicle in the normal way, stop the
vehicle using the following proce-
dure:
Stopping the vehicle
403
7-1. Essential information
7
When trouble arises
press it briefly 3 times or more in
succession.
5
Stop the vehicle in a safe place by
the road.
If the door can be opened, open the
door and exit the vehicle.
If the door cannot be opened, open
the window using the power win-
dow switch and ensure an escape
route.
If the window can be opened, exit
the vehicle through the window.
If the door and window cannot be
opened due to the rising water,
remain calm, wait until the water
level inside the vehicle rises to the
point that the water pressure inside
of the vehicle equals the water pres-
sure outside of the vehicle and then
open the door after waiting for the
rising water to enter the vehicle, and
exit the vehicle.
When the outside water level exceeds half
the height of the door, the door cannot be
opened from the inside due to water pres-
sure.
■ Water level exceeds the floor
When the water level exceeds the floor and
time has passed, the electrical equipment
WARNING
■ If the hybrid system has to be turned
off while driving
Turning the hybrid system off while driv-
ing will not cause loss of steering or brak-
ing control. However, power assist for
the steering wheel may be lost making it
difficult to steer smoothly before stop-
ping the vehicle depending on the
remaining charge in the 12-volt battery
or usage conditions. Decelerate as much
as possible before turning off the hybrid
system.
If the vehicle is submerged
o
r water on the road is rising
This vehicle is not designed to be
able to drive on roads that are
deeply flooded with water. Do not
drive on roads where the roads may
be submerged or the water may be
rising. It is dangerous to remain in
the vehicle, if it is anticipated that
the vehicle will be flooded or set
adrift. Remain calm and follow the
following.
404
7-1. Essential information
will get damaged, the power windows will
not operate, the engine and motor stop, and
the vehicle may not be able to get moving.
■ Using an emergency escape hammer
*1
Laminated glass
*2
is used in the windshield
and front side windows on this vehicle.
Laminated glass cannot be shattered with
an emergency hammer
*1
.
*1
: Contact your Lexus dealer or aftermar-
ket accessory manufacturer for further
information about an emergency ham-
mer.
*2
: If equipped
■ How to distinguish laminated glass
When looking from the cross-sectional
view point, laminated glass is two sheets of
glass pasted together.
Laminated glass
Tempered glass
WARNING
■ Caution while driving
Do not drive on roads where the roads
may be submerged or the water may be
rising. Otherwise the vehicle may be
damaged and cannot move, as well as
become flooded and set adrift, which
may lead to death.
A
B
405
7-2. Steps to take in an emergency
7
When trouble arises
7-2.Steps to take in an emergency
In the following situations, it is not pos-
sible to be towed by another vehicle
using cables or chains, as the front
wheels may be locked due to the park-
ing lock. Contact your Lexus dealer or
commercial towing service.
There is a malfunction in the shift
control system. (P.179, 420)
There is a malfunction in the immo-
bilizer system. (P.71)
There is a malfunction in the smart
access system with push-button
start. (P.430)
The 12-volt battery is discharged.
(P.432)
The following may indicate a problem
with your transmission. Contact your
Lexus dealer or commercial towing
service before towing.
The hybrid system warning message
is shown on the multi-information
display and the vehicle does not
move.
The vehicle makes an abnormal
sound.
From the front (2WD models)
Release the parking brake.
Turn automatic mode off. (P.193)
From the front (AWD models)
Use a towing dolly under the rear
wheels.
If your vehicle needs to be
towed
If towing is necessary, we recom-
mend having your vehicle towed by
your Lexus dealer or commercial
towing service, using a wheel-lift
type truck or flatbed truck.
Use a safety chain system for all
towing, and abide by all state/pro-
vincial and local laws.
Situations when it is not possible
to be towed by another vehicle
Situations when it is necessary to
contact dealers before towing
Towing with a wheel-lift type
truck
406
7-2. Steps to take in an emergency
From the rear
Use a towing dolly under the front
wheels.
WARNING
Observe the following precautions.
Failure to do so may result in death or
serious injury.
■ When towing the vehicle
2WD models
Be sure to transport the vehicle with the
front wheels raised or with all four wheels
raised off the ground. If the vehicle is
towed with the front wheels contacting
the ground, the drivetrain and related
parts may be damaged or electricity
generated by the operation of the motor
may cause a fire to occur depending on
the nature of the damage or malfunction.
AWD models
Be sure to transport the vehicle with all
four wheels raised off the ground. If the
vehicle is towed with the tires contacting
the ground, the drivetrain or related
parts may be damaged, the vehicle may
fly off the truck, or electricity generated
by the operation of the motor may cause
a fire to occur depending on the nature
of the damage or malfunction.
NOTICE
■ To prevent damage to the vehicle
when towing using a wheel-lift type
truck
When raising the vehicle, ensure ade-
quate ground clearance for towing at the
opposite end of the raised vehicle. With-
out adequate clearance, the vehicle
could be damaged while being towed.
407
7-2. Steps to take in an emergency
7
When trouble arises
When using a flat-bed truck to trans-
port the vehicle, use tire strapping
belts. Refer to the owner’s manual of
the flat-bed truck for the tire strapping
method.
In order to suppress vehicle movement
during transportation, set the parking
brake and turn the power switch off.
If a tow truck is not available in an
emergency, your vehicle may be tem-
porarily towed using cables or chains
secured to the emergency towing eye-
let. This should only be attempted on
hard surfaced roads for short distances
at under 18 mph (30 km/h).
A driver must be in the vehicle to steer
and operate the brakes. The vehicle’s
wheels, drivetrain, axles, steering and
brakes must be in good condition.
To have your vehicle towed by another
vehicle, the towing eyelet must be
installed to your vehicle. Install the tow-
ing eyelet using the following proce-
dure.
1
Take out the towing eyelet.
(P.323, 380)
2
Remove the eyelet cover using a
flathead screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the vehicle
body as shown in the illustration.
3 Insert the towing eyelet into the
hole and tighten partially by hand.
NOTICE
■ Towing with a sling-type truck
Do not tow with a sling-type truck to pre-
vent body damage.
Using a flatbed truck
Emergency towing
Emergency towing procedure
408
7-2. Steps to take in an emergency
4 Tighten down the towing eyelet
securely using a hard metal bar.
5
Securely attach cables or chains to
the towing eyelet.
Take care not to damage the vehicle body.
6 Enter the vehicle being towed and
start the hybrid system.
If the hybrid system does not start, turn the
power switch to ON.
7 Shift the shift position to N and
release the parking brake.
Turn automatic mode off. (P.193)
■ While towing
If the hybrid system is off, the power assist
for the brakes and steering will not function,
making steering and braking more difficult.
■ Wheel nut wrench
Wheel nut wrench can be purchased at
your Lexus dealer.
WARNING
Observe the following precautions. Fail-
ure to do so may result in death or seri-
ous injury.
■ While towing
● When towing using cables or chains,
avoid sudden starts, etc. which place
excessive stress on the towing eyelet,
cables or chains. The towing eyelet,
cables or chains may become dam-
aged, broken debris may hit people,
and cause serious damage.
● Do not perform any of the following as
doing so may cause the parking lock
mechanism to engage, locking the
front wheels and possibly leading to an
accident resulting in death or serious
injury:
• Unfasten the driver’ seat belt and open
the driver’ door.
• Turn the power switch off.
■ Installing towing eyelets to the vehi-
cle
Make sure that towing eyelets are
installed securely.
If not securely installed, towing eyelets
may come loose during towing.
NOTICE
■ To prevent damage to the vehicle
during emergency towing
Do not secure cables or chains to the
suspension components.
409
7-2. Steps to take in an emergency
7
When trouble arises
Fluid leaks under the vehicle
(Water dripping from the air condi-
tioning after use is normal.)
Flat-looking tires or uneven tire
wear
Engine coolant temperature gauge
continually points higher than nor-
mal
Changes in exhaust sound
Excessive tire squeal when corner-
ing
Strange noises related to the sus-
pension system
Pinging or other noises related to
the hybrid system
Engine missing, stumbling or run-
ning roughly
Appreciable loss of power
Vehicle pulls heavily to one side
when braking
Vehicle pulls heavily to one side
when driving on a level road
Loss of brake effectiveness, spongy
feeling, pedal almost touches the
floor
If you think something is
wrong
If you notice any of the following
symptoms, your vehicle probably
needs adjustment or repair. Con-
tact your Lexus dealer as soon as
possible.
Visible symptoms
Audible symptoms
Operational symptoms
410
7-2. Steps to take in an emergency
■ Brake system warning light (warning buzzer)
■ Charging system warning light
*
(warning buzzer)
*
: This light illuminates on the multi-information display.
■ Low engine oil pressure warning light
*
(warning buzzer)
*
: This light illuminates on the multi-information display.
If a warning light turns on or a warning buzzer sounds
Calmly perform the following actions if any of the warning lights comes on or
flashes. If a light comes on or flashes, but then goes off, this does not necessar-
ily indicate a malfunction in the system. However, if this continues to occur,
have the vehicle inspected by your Lexus dealer.
Actions to the warning lights or warning buzzers
Warning light Details/Actions
(U.S.A.)
or
(red)
(Canada)
Indicates that:
The brake fluid level is low; or
The brake system is malfunctioning
Immediately stop the vehicle in a safe place and contact your
Lexus dealer. Continuing to drive the vehicle may be dangerous.
Warning light Details/Actions
Indicates a malfunction in the vehicle’s charging system
Immediately stop the vehicle in a safe place and contact your
Lexus dealer.
Warning light Details/Actions
Indicates that the engine oil pressure is too low
Immediately stop the vehicle in a safe place and contact your
Lexus dealer.
411
7-2. Steps to take in an emergency
7
When trouble arises
■ Malfunction indicator lamp (warning buzzer)
■ High coolant temperature warning light
*
(warning buzzer)
*
: This light illuminates on the multi-information display.
■ Tire pressure warning light
Warning light Details/Actions
(U.S.A.)
or
(Canada)
Indicates a malfunction in:
The hybrid system;
The electronic engine control system; or
The electronic throttle control system
Immediately stop the vehicle in a safe place and contact your
Lexus dealer.
Warning light Details/Actions
Indicates that the engine coolant temperature is too high
Immediately stop the vehicle in a safe place.
Handling method (P.436)
Warning light Details/Actions
When the light comes on:
Low tire inflation pressure from natural causes
After the temperature of the tires has lowered sufficiently, check
the inflation pressure of each tire and adjust them to the specified
level.
Low tire inflation pressure from flat tire
Immediately stop the vehicle in a safe place and perform the nec-
essary actions.
When the light comes on after blinking for approximately 1 minute (a
buzzer does not sounds):
Malfunction in the tire pressure warning system
Have the system checked by your Lexus dealer.
412
7-2. Steps to take in an emergency
■ Brake system warning light (warning buzzer)
■ SRS warning light (warning buzzer)
■ ABS warning light (warning buzzer)
■ Electric power steering system warning light (warning buzzer)
Warning light Details/Actions
(yellow)
Indicates a malfunction in:
The regenerative braking system;
The electronically controlled brake system; or
The parking brake system
Have the vehicle inspected by your Lexus dealer immediately.
Warning light Details/Actions
Indicates a malfunction in:
The SRS airbag system;
The front passenger occupant classification system; or
The seat belt pretensioner system
Have the vehicle inspected by your Lexus dealer immediately.
Warning light Details/Actions
(U.S.A.)
or
(Canada)
Indicates a malfunction in:
The ABS; or
The brake assist system
Have the vehicle inspected by your Lexus dealer immediately.
Warning light Details/Actions
(red)
or
(yellow)
Indicates a malfunction in the EPS (Electric Power Steering) system
Have the vehicle inspected by your Lexus dealer immediately.
413
7-2. Steps to take in an emergency
7
When trouble arises
■ Slip indicator
■ Parking brake indicator
■ Brake hold operated indicator (warning buzzer)
■ Intuitive parking assist OFF indicator (warning buzzer)
Warning light Details/Actions
Indicates a malfunction in:
The VSC system;
The TRAC system; or
The hill-start assist control system
Have the vehicle inspected by your Lexus dealer immediately.
Warning light Details/Actions
(flashes)
(U.S.A.)
or
(flashes)
(Canada)
It is possible that the parking brake is not fully engaged or released.
Operate the parking brake switch once again.
This light comes on when the parking brake is not released. If the light
turns off after the parking brake is fully released, the system is operating
normally.
Warning light Details/Actions
(flashes)
Indicates a malfunction in the brake hold system
Have the vehicle inspected by your Lexus dealer immediately.
Warning light Details/Actions
When a buzzer sounds:
Indicates a malfunction in the intuitive parking assist function
Have the vehicle inspected by your Lexus dealer immediately.
When a buzzer does not sound:
Indicates that the system is temporarily unavailable, possibly due to a
sensor being dirty or covered with ice, etc.
Follow the instructions displayed on the multi-information display.
(P.422)
414
7-2. Steps to take in an emergency
■ Low fuel level warning light
■ Driver’s and front passenger’s seat belt reminder light (warning buzzer)
*
*
: Driver’s seat belt warning buzzer:
The driver’s seat belt warning buzzer sounds to alert the driver that his or her seat belt is
not fastened. Once the power switch is turned to ON, the buzzer sounds. If the seat belt is
still unfastened, the buzzer sounds intermittently for a certain period of time after the vehi-
cle reaches a certain speed.
Front passenger’s seat belt warning buzzer:
The front passenger’s seat belt warning buzzer sounds to alert the front passenger that his
or her seat belt is not fastened. If the seat belt is unfastened, the buzzer sounds intermit-
tently for a certain period of time after the vehicle reaches a certain speed.
■ Rear passengers’ seat belt reminder lights
*1
(warning buzzer)
*2
*1
: This light illuminates on the multi-information display. Regardless of whether or not a
rear passenger is present, if the power switch is turned to ON with the rear seat belts
unfastened, this light will also illuminate for a certain period of time.
*2
: Rear passengers’ seat belt warning buzzer:
The rear passengers’ seat belt warning buzzer sounds to alert the rear passenger that his
or her seat belt is not fastened. If the seat belt is unfastened, the buzzer sounds intermit-
tently for a certain period of time, after the seat belt is fastened and unfastened and the
vehicle reaches a certain speed.
Warning light Details/Actions
Indicates that remaining fuel is approximately 1.6 gal. (6.0L, 1.3 .)
or less
Refuel the vehicle.
Warning light Details/Actions
Warns the driver and/or front passenger to fasten their seat belts
Fasten the seat belt.
If the front passenger’s seat is occupied, the front passenger’s seat
belt also needs to be fastened to make the warning light (warning
buzzer) turn off.
Warning light Details/Actions
Warns the rear passengers to fasten their seat belts
Fasten the seat belt.
415
7-2. Steps to take in an emergency
7
When trouble arises
■ Inappropriate pedal operation warning light
*
(warning buzzer)
*
: This light illuminates on the multi-information display.
■ PCS warning light (warning buzzer)
■ LTA indicator (warning buzzer)
■ LDA indicator (warning buzzer)
■ PDA indicator (warning buzzer)
Warning light Details/Actions
When a buzzer sounds:
Brake Override System is malfunctioning
Drive-Start Control is malfunctioning
Drive-Start Control is operating
Follow the instructions displayed on the multi-information display
and head-up display (if equipped).
When a buzzer does not sound:
Brake Override System is operating
Release the accelerator pedal and depress the brake pedal.
Warning light Details/Actions
Indicates a malfunction in the PCS (Pre-Collision System).
Follow the instructions displayed on the multi-information display.
If the PCS (Pre-Collision System) or VSC (Vehicle Stability Control)
system is disabled, the PCS warning light will illuminate.
Warning light Details/Actions
(Yellow)
Indicates a malfunction in the LTA (Lane Tracing Assist)
Follow the instructions displayed on the multi-information display.
Warning light Details/Actions
(Yellow)
Indicates a malfunction in the LDA (Lane Departure Alert)
Follow the instructions displayed on the multi-information display.
Warning light Details/Actions
(Yellow)
Indicates a malfunction in the PDA (Proactive Driving Assist).
Follow the instructions displayed on the multi-information display.
416
7-2. Steps to take in an emergency
■ Cruise control indicator (warning buzzer)
■ Dynamic radar cruise control indicator (warning buzzer)
■ Driving assist information indicator
■ Hybrid system overheat warning light
*
(warning buzzer)
*
: This light illuminates on the multi-information display.
■ Warning buzzer
In some cases, the buzzer may not be heard
due to being in a noisy location or audio
sound.
■ Front passenger detection sensor, seat
belt reminder and warning buzzer
● If luggage is placed on the front passen-
Warning light Details/Actions
(Yellow)
Indicates a malfunction in the cruise control system.
Follow the instructions displayed on the multi-information display.
Warning light Details/Actions
(Yellow)
Indicates a malfunction in the dynamic radar cruise control system.
Follow the instructions displayed on the multi-information display.
Warning light Details/Actions
(Yellow)
Indicates either of the following systems may be malfunctioning.
PCS (Pre-Collision System)
LDA (Lane Departure Alert)
Follow the instructions displayed on the multi-information display.
Indicates any of the following systems are malfunctioning, disabled, or
turned off.
PKSB (Parking Support Brake) (if equipped)
BSM (Blind Spot Monitor)
RCTA (Rear cross traffic alert)
Safe Exit Assist
Follow the instructions displayed on the multi-information display.
Warning light Details/Actions
Indicates the hybrid system has overheated
This light may be displayed when driving under severe operating condi-
tions. (For example, when driving up a long steep hill.)
Stop the vehicle in a safe place.
Handling method (P.436)
417
7-2. Steps to take in an emergency
7
When trouble arises
ger seat, the front passenger detection
sensor may cause the warning light to
flash and the warning buzzer to sound
even if a passenger is not sitting in the
seat.
● If a cushion is placed on the seat, the sen-
sor may not detect a passenger, and the
warning light may not operate properly.
■ SRS warning light
This warning light system monitors the air-
bag sensor assembly, front impact sensors,
side impact sensors (front door), side
impact sensors (front), front passenger
occupant classification system (ECU and
sensors), “AIR BAG ON” indicator light,
“AIR BAG OFF” indicator light, front pas-
senger’s seat belt buckle switch, seat belt
pretensioners, airbags, interconnecting wir-
ing and power sources. (P.33)
■ Electric power steering system warning
light (warning buzzer)
When the 12-volt battery charge becomes
insufficient or the voltage temporarily
drops, the electric power steering system
warning light may come on and the warning
buzzer may sound.
■ When the tire pressure warning light
comes on
Inspect the tires to check if a tire is punc-
tured.
If a tire is punctured: P.426
If none of the tires are punctured:
Turn the power switch off then turn it to
ON. Check if the tire pressure warning
light comes on or blinks.
If the tire pressure warning light blinks for
approximately 1 minute then stays on
There may be a malfunction in the tire pres-
sure warning system. Have the vehicle
inspected by your Lexus dealer immedi-
ately.
If the tire pressure warning light comes
on
After the temperature of the tires has low-
ered sufficiently, check the inflation pres-
sure of each tire and adjust them to the
specified level.
If the warning light does not turn off even
after several minutes have elapsed, check
that the inflation pressure of each tire is at
the specified level and perform the tire
inflation pressure setting procedure.
(P.372)
If the warning light does not turn off even
after several minutes have elapsed since
performing the tire inflation pressure set-
ting procedure, have the vehicle inspected
by your Lexus dealer immediately.
■ The tire pressure warning light may
come on due to natural causes
The tire pressure warning light may come
on due to natural causes such as natural air
leaks and tire inflation pressure changes
caused by temperature. In this case, adjust-
ing the tire inflation pressure will turn off the
warning light (after a few minutes).
■ Conditions that the tire pressure warn-
ing system may not function properly
P.373
WARNING
■ If a warning light comes on or a warn-
ing buzzer sounds when a warning
message is shown on the multi-infor-
mation display
Check and follow the message shown on
the multi-information display. Failure to
do so may result in death or serious
injury.
WARNING
■ When the electric power steering
system warning light comes on
When the light comes on yellow, the
assist to the power steering is restricted.
When the light comes on red, the assist
to the power steering is lost and handling
operations of the steering wheel become
extremely heavy.
When steering wheel operations are
heavier than usual, grip the steering
wheel firmly and operate it using more
force than usual.
418
7-2. Steps to take in an emergency
■ If the tire pressure warning light
comes on
Be sure to observe the following precau-
tions.
Failure to do so could cause a loss of
vehicle control and result in death or
serious injury.
● Decelerate to the lowest appropriate
speed as soon as possible. Do not
drive over 50 mph (80 km/h).
● Check and adjust the tire inflation
pressure immediately.
● If the tire pressure warning light comes
on even after tire inflation pressure
adjustment, it is probable that you have
a flat tire. Have the flat tire replaced by
the nearest Lexus dealer.
● Avoid abrupt maneuvering and brak-
ing.
If the vehicle tires deteriorate, you
could lose control of the steering
wheel or the brakes.
■ If a blowout or sudden air leakage
should occur
The tire pressure warning system may
not activate immediately.
■ Maintenance of the tires
Each tire, including the spare (if pro-
vided), should be checked monthly when
cold and inflated to the inflation pressure
recommended by the vehicle manufac-
turer on the vehicle placard or tire infla-
tion pressure label (tire and load
information label). (If your vehicle has
tires of a different size than the size indi-
cated on the vehicle placard or tire infla-
tion pressure label [tire and load
information label], you should determine
the proper tire inflation pressure for
those tires.)
As an added safety feature, your vehicle
has been equipped with a tire pressure
monitoring system (TPMS-tire pressure
warning system) that illuminates a low
tire pressure telltale (tire pressure warn-
ing light) when one or more of your tires
is significantly under-inflated. Accord-
ingly, when the low tire pressure telltale
(tire pressure warning light) illuminates,
you should stop and check your tires as
soon as possible, and inflate them to the
proper pressure. Driving on a signifi-
cantly under-inflated tire causes the tire
to overheat and can lead to tire failure.
Under-inflation also reduces fuel effi-
ciency and tire tread life, and may affect
the vehicle’s handling and stopping abil-
ity.
Please note that the TPMS (tire pressure
warning system) is not a substitute for
proper tire maintenance, and it is the
driver’s responsibility to maintain correct
tire pressure, even if under-inflation has
not reached the level to trigger illumina-
tion of the TPMS low tire pressure telltale
(tire pressure warning light).
WARNING
Your vehicle has also been equipped
with a TPMS (tire pressure warning sys-
tem) malfunction indicator to indicate
when the system is not operating prop-
erly. The TPMS (tire pressure warning
system) malfunction indicator is com-
bined with the low tire pressure telltale
(tire pressure warning light). When the
system detects a malfunction, the telltale
will flash for approximately one minute
and then remain continuously illumi-
nated. This sequence will continue upon
subsequent vehicle start-ups as long as
the malfunction exists. When the mal-
function indicator is illuminated, the sys-
tem may not be able to detect or signal
low tire pressure as intended.
419
7-2. Steps to take in an emergency
7
When trouble arises
TPMS (tire pressure warning system)
malfunctions may occur for a variety of
reasons, including the installation of
replacement or alternate tires or wheels
on the vehicle that prevent the TPMS
(tire pressure warning system) from
functioning properly. Always check the
TPMS (tire pressure warning system)
malfunction telltale after replacing one
or more tires or wheels on your vehicle
to ensure that the replacement or alter-
nate tires and wheels allow the TPMS
(tire pressure warning system) to con-
tinue to function properly.
NOTICE
■ To ensure the tire pressure warning
system operates properly
Do not install tires with different specifi-
cations or makers, as the tire pressure
warning system may not operate prop-
erly.
If a warning message is dis-
played
The multi-information display
shows warnings of system malfunc-
tions, incorrectly performed opera-
tions, and messages that indicate a
need for maintenance. When a
message is shown, perform the cor-
rection procedure appropriate to
the message.
Follow the instructions of the mes-
sage on the multi-information dis-
play.
If any of the warning messages are
shown again after the following
actions have been performed, con-
tact your Lexus dealer.
420
7-2. Steps to take in an emergency
The warning lights and warning buzzers operate as follows depending on the con-
tent of the message. If a message indicates the need for inspection by a dealer,
have the vehicle inspected by your Lexus dealer immediately.
*
: A buzzer sounds the first time a message is shown on the multi-information display.
■ Warning messages
The warning messages explained below
may differ from the actual messages
according to operation conditions and vehi-
cle specifications.
■ Warning buzzer
P.416
■ If a message about an operation is
shown
● If a message about an operation of the
accelerator pedal or brake pedal is
shown
• A warning message about an operation
of the brake pedal may be shown while
the driving assist systems such as PCS
(Pre-Collision system) or the dynamic
radar cruise control is operating.
If a warning message is shown, be sure to
decelerate the vehicle or follow an
instruction shown on the multi-informa-
tion display.
• A warning message is shown when Brake
Override System operates. (P.166)
• A warning message is shown when
Drive-Start Control or Parking Support
Brake (if equipped) (P.171, 282) oper-
ates. Follow the instructions on the multi-
information display.
● If a message about an operation of the
power switch is shown
An instruction for operation of the power
switch is shown when the incorrect proce-
dure for starting the hybrid system is per-
formed or the power switch is operated
incorrectly.
Follow the instructions shown on the multi-
information display to operate the power
switch again.
● If a message that indicates the need for
Messages and warnings
Warning light
Warning buzzer
*
Warning
Sounds
• Indicates an important situation, such as when a
system related to driving is malfunctioning or
that danger may result if the correction proce-
dure is not performed
• Indicates a situation, such as when damage to
the vehicle or danger may result
Comes on
or flashes
Sounds
Indicates an important situation, such as when the
systems shown on the multi-information display
may be malfunctioning
Does not sound
• Indicates a condition, such as malfunction of
electrical components, their condition, or indi-
cates the need for maintenance
• Indicates a situation, such as when an operation
has been performed incorrectly, or indicates
how to perform an operation correctly
421
7-2. Steps to take in an emergency
7
When trouble arises
the shift lever operation is displayed
To prevent the shift lever from being oper-
ated incorrectly or the vehicle from moving
unexpectedly, a message that requires
shifting the shift position may be displayed
on the multi-information display. In that
case, follow the instruction of the message
and shift the shift position.
● If a message or image about an
open/close state of a part or replenish-
ment of a consumable is shown
Confirm the part indicated by the multi-
information display or a warning light, and
then perform the coping method such as
closing the open door or replenishing a
consumable.
■ If “Engine Oil Level Low Add or
Replace” is displayed
The engine oil level is low. Check the level
of the engine oil, and add if necessary
(P.362).
This message may appear if the vehicle is
stopped on a slope. Move the vehicle to a
level surface and check to see if the mes-
sage disappears.
■ If “Hybrid System Stopped Steering
Power Low” is displayed
This message is displayed if the hybrid sys-
tem is stopped while driving.
When steering wheel operations are
heavier than usual, grip the steering wheel
firmly and operate it using more force than
usual.
■ If “Hybrid system overheated Output
power reduced” is displayed
This message may be displayed when driv-
ing under severe operating conditions. (For
example, when driving up a long steep hill.)
Handling method: P.436
■ If “Shift System Malfunction Shifting
Unavailable Drive to a Safe Place and
Stop” or “Shift System Malfunction
Driving Unavailable” is displayed
There is a malfunction in the shift control
system. Have the vehicle inspected by your
Lexus dealer immediately.
■ If “Traction Battery Needs to be Pro-
tected Refrain From the Use of N Posi-
tion” is displayed
This message may be displayed when the
shift lever is in N.
As the hybrid battery (traction battery) can-
not be charged when the shift lever is in N,
shift the shift lever to P when the vehicle is
stopped.
■ If “Traction Battery Needs to be Pro-
tected Shift into P to Restart” is dis-
played
This message is displayed when the hybrid
battery (traction battery) charge has
become extremely low because the shift
lever has been left in N for a certain amount
of time.
When operating the vehicle, shift to P and
restart the hybrid system.
■ If “Shift to P Before Exiting Vehicle” is
shown
This message is displayed when the driver’s
door is opened without turning the power
switch off with the shift lever in any position
other than P.
Shift the shift lever to P.
■ If “Shift is in N Release accelerator
before shifting” is displayed
The accelerator pedal has been depressed
when the shift lever is in N.
Release the accelerator pedal and shift the
shift lever to D, S or R.
■ If “Press brake when vehicle is stopped
Hybrid system may overheat” is dis-
played
The message may be displayed when the
accelerator pedal is depressed to hold the
vehicle while the vehicle is stopped on an
incline, etc. The hybrid system may over-
heat. Release the accelerator pedal and
depress the brake pedal.
■ If “Auto Power Off to Conserve Bat-
tery” is displayed
Power was turned off due to the automatic
power off function. Next time when starting
the hybrid system, operate the hybrid sys-
tem for approximately 5 minutes to
422
7-2. Steps to take in an emergency
recharge the 12-volt battery.
■ If “High Power Consumption Power to
Climate Temporarily Limited” is dis-
played
Turn off unnecessary electronic equipment
to reduce power consumption.
Please wait until the power supply returns
to normal.
■ If “Parking Assist Unavailable Low Visi-
bility See Owner’s Manual” is displayed
Indicates one of the following systems is dis-
abled.
● PKSB (Parking Support Brake) (if
equipped)
Remove any dirt or foreign matter from the
rear cameras.
■ If “System Malfunction Visit Your
Dealer” is displayed
Indicates one of the following systems is dis-
abled.
● PCS (Pre-Collision System)
● LDA (Lane Departure Alert)
● LTA (Lane Tracing Assist)
● AHB (Automatic High Beam)
● Dynamic radar cruise control
● RSA (Road Sign Assist) (if equipped)
● PDA (Proactive Driving Assist)
● BSM (Blind Spot Monitor)
● RCTA (Rear Cross Traffic Alert)
● Safe Exit Assist
● Intuitive Parking Assist
● PKSB (Parking Support Brake) (if
equipped)
Have the vehicle inspected by your Lexus
dealer immediately.
■ If “System Stopped See Owner’s Man-
ual” is displayed
Indicates one of the following systems is dis-
abled.
● PCS (Pre-Collision System)
● LDA (Lane Departure Alert)
● LTA (Lane Tracing Assist)
● AHB (Automatic High Beam)
● Dynamic radar cruise control
● RSA (Road Sign Assist) (if equipped)
● PDA (Proactive Driving Assist)
● BSM (Blind Spot Monitor)
● RCTA (Rear Cross Traffic Alert)
● Safe Exit Assist (if equipped)
● Intuitive Parking Assist
● PKSB (Parking Support Brake) (if
equipped)
Follow the following correction methods.
• Check the voltage of the 12-volt battery
• Check the sensors that the Lexus Safety
System+3 uses for foreign matter cover-
ing them. Remove them if any. (P.216)
Indicates the sensors may not be operating
properly. (P.268, 271, 274, 280)
• Check the rear bumper around the sen-
sors used by the BSM, RCTA or Safe Exit
Assist for foreign matter covering them.
Remove them if any. (P.265)
• Check the sensors including camera sen-
sors used by the Intuitive parking assist or
PKSB (if equipped) for foreign matter
covering them. Remove them if any.
(P.272)
• When problems are solved and the sen-
sors are operational, this indication may
disappear by itself.
■ If “System Stopped Front Camera Low
Visibility See Owner’s Manual” is dis-
played
Indicates one of the following systems is dis-
abled.
● PCS (Pre-Collision System)
● LDA (Lane Departure Alert)
● LTA (Lane Tracing Assist)
● AHB (Automatic High Beam)
● Dynamic radar cruise control
423
7-2. Steps to take in an emergency
7
When trouble arises
● RSA (Road Sign Assist) (if equipped)
● PDA (Proactive Driving Assist)
Follow the following correction methods.
• Using the windshield wipers, remove the
dirt or foreign matter from the wind-
shield.
• Using the air conditioning system, defog
the windshield.
• Close the hood, remove any stickers, etc.
to clear the obstruction in front of the
front camera.
■ If “System Stopped Front Camera Out
of Temperature Range Wait until Nor-
mal Temperature” is displayed
Indicates one of the following systems is dis-
abled.
● PCS (Pre-Collision System)
● LDA (Lane Departure Alert)
● LTA (Lane Tracing Assist)
● AHB (Automatic High Beam)
● Dynamic radar cruise control
● RSA (Road Sign Assist) (if equipped)
● PDA (Proactive Driving Assist)
Follow the following correction methods.
• If the front camera is hot, such as after the
vehicle is parked in the sun, use the air
conditioning system to decrease the tem-
perature around the front camera
• If a sunshade was used when the vehicle
was parked, depending on its type, the
sunlight reflected from the surface of the
sunshade may cause the temperature of
the front camera to become excessively
high
• If the front camera is cold, such after the
vehicle is parked in an extremely cold
environment, use the air conditioning
system to increase the temperature
around the front camera
■ If “System Stopped Front Radar Sensor
Blocked Clean Radar Sensor” is dis-
played
Indicates one of the following systems is dis-
abled.
● PCS (Pre-Collision System)
● LDA (Lane Departure Alert)
● LTA (Lane Tracing Assist)
● AHB (Automatic High Beam)
● Dynamic radar cruise control
● PDA (Proactive Driving Assist)
Follow the following correction methods.
• Check if there is any foreign matter
attached to the radar sensor or radar
sensor cover and clean them if necessary
(P.216)
• This message may be displayed when
driving in an open area with few nearby
vehicles or structures, such as a desert,
grasslands, suburbs, etc.
The message may be cleared by driving
the vehicle in an area with structures,
vehicles, etc. nearby.
■ If “System Stopped Front Radar Sensor
Out of Temperature Range Wait until
Normal Temperature” is displayed
Indicates one of the following systems is dis-
abled.
● PCS (Pre-Collision System)
● LDA (Lane Departure Alert)
● LTA (Lane Tracing Assist)
● AHB (Automatic High Beam)
● Dynamic radar cruise control
● PDA (Proactive Driving Assist)
The temperature of the radar sensor is out-
side of the operating range. Wait for the
temperature to become appropriate.
■ If “System Stopped Front Radar In Self
Calibration See Owner’s Manual” is
displayed
Indicates one of the following systems is dis-
abled.
● PCS (Pre-Collision System)
● LDA (Lane Departure Alert)
● LTA (Lane Tracing Assist)
● AHB (Automatic High Beam)
● Dynamic radar cruise control
● PDA (Proactive Driving Assist)
Follow the following correction methods.
• Check if there is any foreign matter
attached to the radar sensor or radar
424
7-2. Steps to take in an emergency
sensor cover and clean them if necessary
(P.216)
• The radar sensor may be misaligned and
will be adjusted automatically while driv-
ing. Continue driving for a while.
■ If “Cruise Control Unavailable See
Owner’s Manual” is displayed
Indicates one of the following systems is dis-
abled.
● Dynamic radar cruise control
● Cruise control
A message is displayed when the driving
assist switch is pushed repeatedly.
Press the driving assist switch quickly and
firmly.
■ If “AWD System Overheated Switching
to 2WD Mode” or “AWD System
Overheated 2WD Mode Engaged” is
shown on the multi-information display
(AWD models)
This message may be displayed when high
load driving is continued. (P.296)
■ If “Maintenance Required Soon” is dis-
played
Indicates that all maintenance according to
the driven distance on the maintenance
schedule
*
should be performed soon.
Comes on approximately 4500 miles
(7200 km) after the message has been
reset. If necessary, perform maintenance.
Please reset the message after the mainte-
nance is performed. (P.352)
*
: Refer to the separate “Scheduled Main-
tenance” or “Owner’s Manual Supple-
ment” for the maintenance interval
applicable to your vehicle.
■ If “Maintenance Required Visit Your
Dealer” is displayed
Indicates that all maintenance is required to
correspond to the driven distance on the
maintenance schedule
*
.
Comes on approximately 5000 miles
(8000 km) after the message has been
reset. (The indicator will not work properly
unless the message has been reset.) Per-
form the necessary maintenance. Please
reset the message after the maintenance is
performed. (P.352)
*
: Refer to the separate “Scheduled Main-
tenance” or “Owner’s Manual Supple-
ment” for the maintenance interval
applicable to your vehicle.
■ If “Engine Maintenance Required Visit
Your Dealer” is shown
The engine or an engine component is mal-
functioning. Have the vehicle inspected by
your Lexus dealer immediately.
■ If “Oil Maintenance Required Soon” is
displayed
Indicates that the engine oil should be
scheduled to be changed.
Check the engine oil and change it if neces-
sary. After changing the engine oil, make
sure to reset the message. (P.363)
■ If “Oil Maintenance Required” is dis-
played
Indicates that the engine oil should be
changed.
Check and change the engine oil, and oil fil-
ter by your Lexus dealer. After changing
the engine oil, make sure to reset the mes-
sage. (P.363)
■ If a message that indicates the need for
visiting your Lexus dealer is displayed
The system or part shown on the multi-
information display is malfunctioning. Have
the vehicle inspected by your Lexus dealer
immediately.
■ If a message that indicates the need for
referring to Owner’s Manual is dis-
played
● If any of the following messages are
shown on the multi-information display,
follow the instructions.
• “Engine Coolant Temp High” (P.436)
● If any of the following messages are
shown on the multi-information display, it
may indicate a malfunction. Have the
vehicle inspected by your Lexus dealer
immediately.
• “Access System with Elec. Key Malfunc-
tion”
425
7-2. Steps to take in an emergency
7
When trouble arises
• “Hybrid system malfunction”
• “Check Engine”
• “Hybrid battery system malfunction”
• “Accelerator system malfunction”
• “Shift System Malfunction Apply Parking
Brake Securely When Parking See
Owner’s Manual”
• “P Switch Malfunction Apply Parking
Brake Securely When Parking See
Owner’s Manual”
• “Shift System Unavailable Apply Parking
Brake Securely When Parking See
Owner’s Manual”
• “Shift System Malfunction See Owner’s
Manual”
• “Shift System Malfunction Stop in a Safe
Place See Owner’s Manual”
• “Battery Low Shifting Unavailable See
Owner’s Manual”
● If any of the following messages are
shown on the multi-information display, it
may indicate a malfunction. Immediately
stop the vehicle and contact your Lexus
dealer.
• “Braking Power Low”
• “Charging System Malfunction”
• “Oil Pressure Low”
● If any of the following messages are
shown on the multi-information display,
the vehicle may have run out of fuel. Stop
the vehicle in a safe place and, if the fuel
level is low, refuel the vehicle. (P.67)
• “Hybrid system stopped”
• “Engine stopped”
● If “Low Auxiliary Battery See Owner’s
Manual” is shown
• When the display goes off after several
seconds
*
:
Maintain the hybrid system operation for
more than 15 minutes and charge the 12-
volt battery.
• When the display does not go off:
Start up the hybrid system using the proce-
dures for “If the 12-volt battery is dis-
charged” (P.432)
*
: Displays for about 6 seconds
● If “Maintenance required for Traction
battery cooling parts See owner’s man-
ual” is shown, the filter may be clogged,
the air intake vent may be blocked, or
there may be a gap in the duct. There-
fore, perform the following correction
procedure.
• Cleaning the hybrid battery (traction bat-
tery) air intake vent (P.389)
If the warning message is shown even if
the vent is cleaned, have the vehicle
inspected by your Lexus dealer.
WARNING
■ If a warning light comes on or a warn-
ing buzzer sounds when a warning
message is shown on the multi-infor-
mation display
P.417
NOTICE
■ If “High Power Consumption Power
to Climate Temporarily Limited” is
displayed frequently
There is a possible malfunction relating
to the charging system or the 12-volt bat-
tery may be deteriorating. Have the vehi-
cle inspected by your Lexus dealer.
■ If “Low Auxiliary Battery” is displayed
frequently
The 12-volt battery may have deterio-
rated. As the battery may discharge in
this state when left unattended, have the
battery inspected by your Lexus dealer.
426
7-2. Steps to take in an emergency
Take your vehicle to the nearest Lexus
dealer or authorized tire dealer as
soon as possible if any tire goes flat.
The vehicle can be driven for a maximum
of 100 miles (160 km) at a speed below 50
mph (80 km/h) after the tire pressure
warning light comes on. (P.411)
A run-flat tire has a mark on the
side wall.
■ In some condition (such as at high tem-
peratures)
You cannot continue driving for up to 100
miles (160 km).
■ For the detailed information on run-flat
tires
P.371
If you have a flat tire
Your vehicle is not equipped with a
spare tire, but instead you can con-
tinue driving the vehicle with run-
flat tires even if any tire goes flat.
In this case, slow down and drive
with extra caution.
Run-flat tires
NOTICE
■ When replacing the tires
When removing or fitting the wheels,
tires or the tire pressure warning valve
and transmitter, contact your Lexus
dealer as the tire pressure warning valve
and transmitter may be damaged if not
handled correctly.
■ When driving over bumps
If a vehicle has a flat tire, the vehicle
height will be lower than usual. Ensure
that nothing strikes the bottom of the
vehicle.
■ To avoid damaging the tire pressure
warning valves and transmitters
When a tire is repaired with liquid seal-
ants, the tire pressure warning valve and
transmitter may not operate properly. If a
liquid sealant is used, contact your Lexus
dealer or other qualified service shop as
soon as possible. Make sure to replace
the tire pressure warning valve and
transmitter when replacing the tire.
(P.373)
427
7-2. Steps to take in an emergency
7
When trouble arises
One of the following may be the cause
of the problem:
The electronic key may not be func-
tioning properly. (P.430)
There may not be sufficient fuel in
the vehicle’s tank.
Refuel the vehicle.
There may be a malfunction in the
immobilizer system. (P.71)
There may be a malfunction in the
shift control system.
*
(P.179)
The hybrid system may be malfunc-
tioning due to an electrical problem
such as electronic key battery
depletion or a blown fuse. However,
depending on the type of malfunc-
tion, an interim measure is available
to start the hybrid system.
(P.427)
There is a possibility that the tem-
perature of the hybrid battery (trac-
tion battery) is extremely low
(approximately below -22°F [-
30°C]). (P.67, 178)
*
: It may not be possible to shift the shift
position from P.
One of the following may be the cause
of the problem:
The 12-volt battery may be dis-
charged. (P.432)
The 12-volt battery terminal con-
nections may be loose or corroded.
(P.367)
One of the following may be the cause
of the problem:
The 12-volt battery may be dis-
charged. (P.432)
One or both of the 12-volt battery
terminals may be disconnected.
(P.367)
Contact your Lexus dealer if the problem
cannot be repaired, or if repair procedures
are unknown.
When the hybrid system does not start,
the following steps can be used as an
interim measure to start the hybrid sys-
tem if the power switch is functioning
normally.
Do not use this starting procedure
If the hybrid system will not
start
Reasons for the hybrid system not
starting vary depending on the situ-
ation. Check the following and per-
form the appropriate procedure:
The hybrid system will not start
even though the correct starting
procedure is being followed.
The interior lights and head-
lights are dim, or the horn does
not sound or sounds at a low vol-
ume.
The interior lights and head-
lights do not turn on, or the horn
does not sound.
Starting the hybrid system in an
emergency
428
7-2. Steps to take in an emergency
except in cases of emergency.
1
Press the parking brake switch to
check that the parking brake is set.
(P.192)
Parking brake indicator will come on.
2 Turn the power switch to ACC.
*1, 2
3 Press and hold the power switch for
about 15 seconds while depressing
the brake pedal firmly.
Even if the hybrid system can be
started using the above steps, the sys-
tem may be malfunctioning. Have the
vehicle inspected by your Lexus
dealer.
*1
: ACC mode can be enabled/disabled
on the customize menu.
*2
: When ACC is disabled, turn the power
switch to ON then OFF, and start the
hybrid system as described in P.431
within 5 seconds.
If you lose your keys
New genuine mechanical keys can
be made by your Lexus dealer using
another mechanical key and the
key number stamped on your key
number plate. Keep the plate in a
safe place such as your wallet, not in
the vehicle.
NOTICE
■ When an electronic key is lost
If the electronic key remains lost, the risk
of vehicle theft increases significantly.
Visit your Lexus dealer immediately with
all remaining electronic keys and the
card key (if equipped) that were pro-
vided with your vehicle.
429
7-2. Steps to take in an emergency
7
When trouble arises
1 Remove the cover inside the lug-
gage compartment by inserting a
screwdriver.
When removing the cover, to prevent
damage, cover the tip of the screwdriver
with a rag.
2 Pull the lever.
If the fuel filler door cannot
b
e opened
If the fuel filler door opener switch
cannot be operated, contact your
Lexus dealer to service the vehicle.
In case where refueling is urgently
necessary, the following proce-
dure can be used to open the fuel
filler door.
Opening the fuel filler door
NOTICE
■ When opening the fuel filler door
manually
● Do not open the fuel filler door manu-
ally except in an emergency. Fuel may
overflow.
● Using the lever to open the fuel filler
door may not allow for an adequate
reduction in fuel tank pressure before
refueling. To prevent fuel from spilling
out, turn the cap slowly when remov-
ing it.
● During refueling, fuel may spill out
from the filler opening due to air being
discharged from inside the fuel tank.
Therefore, fill the fuel tank carefully
and slowly.
430
7-2. Steps to take in an emergency
■ When the electronic key does not work
properly
● Make sure that the smart access system
with push-button start has not been deac-
tivated in the customization setting. If it is
off, turn the function on.
(Customizable features: P.463)
● Check if battery-saving mode is set. If it is
set, cancel the function. (P.140)
● The electronic key function may have
stopped. (P.140)
■ Unlocking the door
Use the mechanical key (P.117) to
perform the following operations.
1
Insert the mechanical key while
pulling on the driver’s door handle.
2
Unlock the door.
3
Remove the key, return the handle,
and then pull the handle again.
■ Locking the door
1
With the door open, push down the
inside lock button.
2
Close the door.
■ Key linked functions
The opening and closing of the power win-
dows and moon roof (if equipped) can be
linked to key operation by a customized
If the electronic key does not
o
perate properly
If communication between the
electronic key and vehicle is inter-
rupted (P.140) or the electronic
key cannot be used because the
battery is depleted, the smart
access system with push-button
start and wireless remote control
cannot be used. In such cases, the
doors can be opened and the hybrid
system can be started by following
the procedure below.
NOTICE
■ In case of a smart access system with
push-button start malfunction or
other key-related problems
Take your vehicle with all the electronic
keys provided with your vehicle, includ-
ing the card key, to your Lexus dealer.
Locking and unlocking the doors
431
7-2. Steps to take in an emergency
7
When trouble arises
setting.
1
Closes the windows and moon roof
(turn and hold)
2
Opens the windows and moon roof
(turn and hold)
1 Ensure that the shift lever is in P and
depress the brake pedal.
2
Touch the Lexus emblem side of
the electronic key to the power
switch.
When the electronic key is detected, a
buzzer sounds and the power switch will
turn to ON.
When the smart access system with push-
button start is deactivated in customization
setting, the power switch will turn to ACC.
3 Firmly depress the brake pedal and
check that is shown on the
multi-information display.
4
Press the power switch.
In the event that the hybrid system still can-
not be started, contact your Lexus dealer.
■ Stopping the hybrid system
Set the parking brake, shift the shift lever to
P and press the power switch as you nor-
mally do when stopping the hybrid system.
■ Electronic key battery
As the above procedure is a temporary
measure, it is recommended that the elec-
tronic key battery be replaced immediately
when the battery is depleted. (P.392)
■ Alarm
If a door is unlocked using the mechanical
key when the alarm system is set, the alarm
may be triggered. (P.72)
■ Changing power switch modes
Release the brake pedal and press the
power switch in step
3
above.
The hybrid system does not start and modes
will be changed each time the switch is
pressed. (P.180)
WARNING
■ When using the mechanical key and
operating the power windows or
moon roof (if equipped)
Operate the power window or moon
roof after checking to make sure that
there is no possibility of any passenger
having any of their body parts caught in
the window or moon roof.
Also, do not allow children to operate the
mechanical key. It is possible for children
and other passengers to get caught in
the power window or moon roof.
Starting the hybrid system
432
7-2. Steps to take in an emergency
If you have a set of jumper (or booster)
cables and a second vehicle with a 12-
volt battery, you can jump start your
vehicle by following the steps below.
1 Confirm that the electronic key is
being carried.
When connecting the jumper (or booster)
cables, depending on the situation, the
alarm may activate and doors locked.
(P.73)
2 Open the hood (P.359) and
fuse box cover.
Push the tab in and lift the lid off.
3 Open the exclusive jump starting
terminal cover.
4 Remove the engine cover.
5 Connect a positive jumper cable clamp to on your vehicle and connect the
clamp on the other end of the positive cable to on the second vehicle. Then,
connect a negative cable clamp to on the second vehicle and connect the
clamp at the other end of the negative cable to .
If the 12-volt battery is dis-
charged
The following procedures may be
used to start the hybrid system if the
vehicle’s 12-volt battery is dis-
charged.
You can also call your Lexus dealer
or a qualified repair shop.
Restarting the hybrid system
A
B
C
D
433
7-2. Steps to take in an emergency
7
When trouble arises
Use jumper cables that can reach the specified terminals and connecting point.
Exclusive jump starting terminal (your vehicle)
Positive (+) battery terminal (second vehicle)
Negative (-) battery terminal (second vehicle)
Metallic point shown in the illustration
6 Start the engine of the second vehi-
cle. Increase the engine speed
slightly and maintain at that level for
approximately 5 minutes to
recharge the 12-volt battery of your
vehicle.
7 Maintain the engine speed of the
second vehicle and start the hybrid
system of your vehicle by turning
the power switch to ON.
8 Make sure the “READY” indicator
comes on. If the indicator light does
not come on, contact your Lexus
dealer.
9 Once the hybrid system has
started, remove the jumper cables
in the exact reverse order from
which they were connected.
10 Close the exclusive jump starting
terminal cover, and reinstall the
fuse box cover to its original posi-
tion.
Once the hybrid system starts, have
the vehicle inspected at your Lexus
dealer as soon as possible.
■ Starting the hybrid system when the 12-
volt battery is discharged
The hybrid system cannot be started by
push-starting.
■ To prevent 12-volt battery discharge
● Turn off the headlights, the air condition-
ing system, the audio system, etc. while
the hybrid system is off.
● Turn off any unnecessary electrical com-
ponents when the vehicle is running at a
low speed for an extended period, such
as in heavy traffic.
■ Charging the 12-volt battery
The electricity stored in the 12-volt battery
will discharge gradually even when the
vehicle is not in use, due to natural dis-
charge and the draining effects of certain
A
B
C
D
434
7-2. Steps to take in an emergency
electrical appliances. If the vehicle is left for
a long time, the 12-volt battery may dis-
charge, and the hybrid system may be
unable to start. (The 12-volt battery
recharges automatically while the hybrid
system is operating.)
■ When recharging or replacing the 12-
volt battery
● Information stored in the ECU is cleared.
When the 12-volt battery is depleted,
have the vehicle inspected at your Lexus
dealer.
● In some cases, it may not be possible to
unlock the doors using the smart access
system with push-button start when the
12-volt battery is discharged. Use the
wireless remote control or the mechani-
cal key to lock or unlock the doors.
● The hybrid system may not start on the
first attempt after the 12-volt battery has
recharged but will start normally after the
second attempt. This is not a malfunction.
● The power switch mode is memorized by
the vehicle. When the 12-volt battery is
reconnected, the system will return to the
mode it was in before the 12-volt battery
was discharged. Before disconnecting
the 12-volt battery, turn the power switch
off.
If you are unsure what mode the power
switch was in before the 12-volt battery
discharged, be especially careful when
reconnecting the 12-volt battery.
● If the 12-volt battery discharges, it may
not be possible to shift the shift position to
other positions. In this case, the vehicle
cannot be towed without lifting both front
wheels because the front wheels will be
locked.
● The power back door (if equipped) must
be initialized. (P.134)
■ When replacing the 12-volt battery
● Use a Central Degassing type 12-volt
battery (European Regulations).
● Use a 12-volt battery that the case size is
same as the previous one (LN1), 20 hour
rate capacity (20HR) is equivalent
(45Ah) or greater, and performance rat-
ing (CCA) is equivalent (285A) or
greater.
• If the sizes differ, the 12-volt battery can-
not be properly secured.
• If an improper 12-volt battery is used, bat-
tery performance may decrease and the
hybrid system may not be able to restart.
• If the 20 hour rate capacity is low, even if
the time period where the vehicle is not
used is a short time, the 12-volt battery
may discharge and hybrid system may
not be able to start.
● Use a 12-volt battery with a handle. If a
12-volt battery without a handle is used,
removal is more difficult.
● After exchanging, firmly attach the fol-
lowing items to the exhaust hole of the
12-volt battery.
• Confirm that the elbow is securely
attached to the exhaust hose and exhaust
hole.
• Confirm that the exhaust hole plug is
securely attached to the exhaust hole that
the elbow is not attached to.
• Use the elbow/exhaust hole plug
included with the 12-volt battery
exchanged or the one installed on the
battery prior to the exchange. (Depend-
ing on the 12-volt battery to be
exchanged, the exhaust hole may be
plugged.)
Exhaust hole
Exhaust hole plug
Exhaust hose
Elbow
A
B
C
D
435
7-2. Steps to take in an emergency
7
When trouble arises
For details, consult your Lexus dealer.
WARNING
■ When removing the 12-volt battery
terminals
Always remove the negative (-) terminal
first. If the positive (+) terminal contacts
any metal in the surrounding area when
the positive (+) terminal is removed, a
spark may occur, leading to a fire in addi-
tion to electrical shocks and death or
serious injury.
■ Avoiding 12-volt battery fires or
explosions
Observe the following precautions to
prevent accidentally igniting the flamma-
ble gas that may be emitted from the 12-
volt battery:
● Make sure each jumper cable is con-
nected to the correct terminal and that
it is not unintentionally in contact with
any other than the intended terminal.
● Do not allow the other end of the
jumper cable connected to the “+” ter-
minal to come into contact with any
other parts or metal surfaces in the
area, such as brackets or unpainted
metal.
● Do not allow the + and - clamps of the
jumper cables to come into contact
with each other.
● Do not smoke, use matches, cigarette
lighters or allow open flame near the
12-volt battery.
■ 12-volt battery precautions
The 12-volt battery contains poisonous
and corrosive acidic electrolyte, while
related parts contain lead and lead com-
pounds. Observe the following precau-
tions when handling the 12-volt battery:
● When working with the 12-volt battery,
always wear safety glasses and take
care not to allow any battery fluids
(acid) to come into contact with skin,
clothing or the vehicle body.
● Do not lean over the 12-volt battery.
● In the event that battery fluid (acid)
comes into contact with the skin or
eyes, immediately wash the affected
area with water and seek medical
attention.
Place a wet sponge or cloth over the
affected area until medical attention
can be received.
● Always wash your hands after han-
dling the 12-volt battery and other bat-
tery-related parts.
● Do not allow children near the 12-volt
battery.
■ After recharging the 12-volt battery
Have the 12-volt battery inspected at
your Lexus dealer as soon as possible.
If the 12-volt battery is deteriorating, con-
tinued use may cause the 12-volt battery
to emit a malodorous gas, which may be
detrimental to the health of passengers.
■ When replacing the 12-volt battery
● When the vent plug is close to the hold
down clamp, the battery fluid (acid)
may leak.
● For information regarding battery
replacement, contact your Lexus
dealer.
● After exchanging, securely attach the
elbow connected to the exhaust hose,
and exhaust hole plug to the exhaust
hole of the exchanged 12-volt battery.
If not properly installed, gases (hydro-
gen) may leak into the vehicle interior,
and there is the possible danger of the
gas igniting and exploding.
NOTICE
■ When handling jumper cables
When connecting the jumper cables,
ensure that they do not become entan-
gled in the cooling fans or belt.
436
7-2. Steps to take in an emergency
If the engine coolant temperature
gauge enters the red zone or
“Engine Coolant Temp High Stop in
a Safe Place See Owner’s Manual”
is shown on the multi-information
display
1
Stop the vehicle in a safe place and
turn off the air conditioning system,
and then stop the hybrid system.
2
If you see steam:
Carefully lift the hood after the
steam subsides.
If you do not see steam:
Carefully lift the hood.
3
After the hybrid system has cooled
down sufficiently, inspect the hoses
NOTICE
■ When connecting jumper cables
Make sure to connect jumper cables to
the specified terminals and connecting
point. Failure to do so may adversely
affect the electronic devices or damage
to them.
■ To prevent damaging the vehicle
The exclusive jump starting terminal is to
be used when charging the 12-volt bat-
tery from another vehicle in an emer-
gency. It cannot be used to jump start
another vehicle.
If your vehicle overheats
The following may indicate that
your vehicle is overheating.
The engine coolant temperature
gauge (P.84, 90) enters the
red zone, or a loss of hybrid sys-
tem power is experienced. (For
example, the vehicle speed does
not increase.)
“Engine Coolant Temp High Stop
in a Safe Place See Owner’s
Manual” or “Hybrid system over-
heated Output power reduced” is
shown on the multi-information
display.
Steam comes out from under the
hood.
Correction procedures
437
7-2. Steps to take in an emergency
7
When trouble arises
and radiator core (radiator) for any
leaks.
Radiator
Cooling fans
If a large amount of coolant leaks, immedi-
ately contact your Lexus dealer.
4 The coolant level is satisfactory if it
is between the “MAX” and “MIN”
lines on the reservoir.
Reservoir
“MAX” line
“MIN” line
5 Add coolant if necessary.
Water can be used in an emergency if
coolant is unavailable.
6 Start the hybrid system and turn the
air conditioning system on to check
that the radiator cooling fans oper-
ate and to check for coolant leaks
from the radiator or hoses.
The fans operate when the air conditioning
system is turned on immediately after a
cold start. Confirm that the fans are oper-
ating by checking the fan sound and air
flow. If it is difficult to check these, turn the
air conditioning system on and off repeat-
edly.
(The fans may not operate in freezing tem-
peratures.)
7 If the fans are not operating:
Stop the hybrid system immediately
and contact your Lexus dealer.
If the fans are operating:
Have the vehicle inspected at the
nearest Lexus dealer.
8 Check if “Engine Coolant Temp
High Stop in a Safe Place See
Owner’s Manual” is shown on the
multi-information display.
If the message does not disappear:
Stop the hybrid system and contact
your Lexus dealer.
If the message is not displayed:
Have the vehicle inspected at the
nearest Lexus dealer.
A
B
A
B
C
438
7-2. Steps to take in an emergency
If “Hybrid system overheated Out-
put power reduced” is shown on the
multi-information display
1
Stop the vehicle in a safe place.
2
Stop the hybrid system and care-
fully lift the hood.
3
After the hybrid system has cooled
down, inspect the hoses and radia-
tor core (radiator) for any leaks.
Radiator
Cooling fans
If a large amount of coolant leaks, immedi-
ately contact your Lexus dealer.
4 The coolant level is satisfactory if it
is between the “F” and “L” lines on
the reservoir.
Reservoir
“F” line
“L” line
5 Add coolant if necessary.
Water can be used in an emergency if
coolant is unavailable.
If water has been added in an emergency,
have the vehicle inspected by your Lexus
dealer as soon as possible.
6 After stopping the hybrid system
and waiting for 5 minutes or more,
start the hybrid system again and
check if “Hybrid system over-
heated Output power reduced” is
shown on the multi-information dis-
play.
If the message does not disappear:
Stop the hybrid system and contact your
Lexus dealer.
If the message is not displayed:
The hybrid system temperature has
dropped and the vehicle may be driven
normally.
However, if the message appears again
frequently, contact your Lexus dealer.
A
B
A
B
C
WARNING
■ To prevent an accident or injury when
inspecting under the hood of your
vehicle
Observe the following precautions.
Failure to do so may result in serious
injury such as burns.
● If steam is seen coming from under the
hood, do not open the hood until the
steam has subsided. The engine com-
partment may be very hot.
439
7-2. Steps to take in an emergency
7
When trouble arises
1 Stop the hybrid system. Shift the
shift position to P and set the park-
ing brake.
2
Remove the mud, snow or sand
from around the front wheels.
3
Place wood, stones or some other
material under the front wheels to
help provide traction.
4
Restart the hybrid system.
5
Shift the shift position to D or R and
release the parking brake. Then,
while exercising caution, depress
the accelerator pedal.
■ When it is difficult to free the vehicle
Press the switch to turn off TRAC.
(P.293)
WARNING
● After the hybrid system has been
turned off, check that the “READY”
indicator is off. When the hybrid sys-
tem is operating, the gasoline engine
may automatically start, or the cooling
fan may suddenly operate even if the
gasoline engine stops. Do not touch or
approach rotating parts such as the
fan, which may lead to fingers or cloth-
ing (especially a tie, a scarf or a muf-
fler) getting caught, resulting in serious
injury.
● Do not loosen the coolant reservoir
cap while the hybrid system and radia-
tor are hot.
High temperature steam or coolant
could spray out.
NOTICE
■ When adding engine/power control
unit coolant
Add coolant slowly after the hybrid sys-
tem has cooled down sufficiently. Adding
cool coolant to a hot hybrid system too
quickly can cause damage to the hybrid
system.
■ To prevent damage to the cooling
system
Observe the following precautions:
● Avoid contaminating the coolant with
foreign matter (such as sand or dust
etc.).
● Do not use any coolant additive.
If the vehicle becomes stuck
Carry out the following procedures
if the tires spin or the vehicle
becomes stuck in mud, dirt or snow:
Recovering procedure
440
7-2. Steps to take in an emergency
WARNING
■ When attempting to free a stuck vehi-
cle
If you choose to push the vehicle back
and forth to free it, make sure the sur-
rounding area is clear to avoid striking
other vehicles, objects or people. The
vehicle may also lunge forward or lunge
back suddenly as it becomes free. Use
extreme caution.
■ When shifting the shift position
Be careful not to shift the shift lever with
the accelerator pedal depressed.
This may lead to unexpected rapid accel-
eration of the vehicle that may cause an
accident resulting in death or serious
injury.
NOTICE
■ To avoid damage to the hybrid trans-
mission and other components
● Avoid spinning the tires and depress-
ing the accelerator pedal more than
necessary.
● If the vehicle remains stuck even after
these procedures are performed, the
vehicle may require towing to be
freed.

Popular Owner Manuals