When Driving
Cruise Control
3. Set the cruise control by pressing the
NOTE
SET or SET switch at the desired
speed. The cruise control is set at the
moment the SET or SET switch is
pressed. Release the accelerator pedal
simultaneously. The cruise set indicator
light (Green) illuminates.
ꢀ ꢀ
Cruise control will cancel if the
vehicle speed decreases below
21 km/h (13 mph) when cruise is
activated, such as when climbing a
steep grade.
Cruise control may cancel at about
15 km/h (9 mph) below the preset
speed (such as may happen when
climbing a long, steep grade).
ꢀ ꢀ
NOTE
ꢀ ꢀ
The cruise control speed setting
cannot be performed under the
following conditions:
To Increase Cruising Speed
ꢀ ꢀ
(Automatic transaxle)
Follow either of these procedures.
ꢀ
The selector lever is in the P or N
position.
(Manual transaxle)
The shift lever is in the neutral
To increase speed using cruise control
switch
ꢀ ꢀ
ꢀ
position.
The parking brake is applied.
(Vehicles with adjustable speed
limiter)
Press the SET switch and hold it. Your
vehicle will accelerate. Release the switch
at the speed you want.
ꢀ ꢀ
ꢀ ꢀ
ꢀ
The ON/OFF switch for the
Press the SET switch and release it
immediately to adjust the preset speed.
Multiple operations will increase the
preset speed according to the number of
times it is operated.
adjustable speed limiter is pressed.
ꢀ ꢀ
Release the SET or SET switch
at the desired speed, otherwise the
speed will continue increasing while
the SET switch is pressed and
held, and continue decreasing while
the SET switch is pressed and held
(except when the accelerator pedal is
depressed).
Increasing speed with a single SET
switch operation
Meter display for vehicle speed indicated
in km/h: 1 km/h (0.6 mph)
ꢀ ꢀ
On a steep grade, the vehicle may
Meter display for vehicle speed indicated
in mph: 1 mph (1.6 km/h)
momentarily slow down while
ascending, or speed up while
descending.
4
–140