Get When Driving -> Instrument Cluster and Display Guide for Mazda 2 SUV First Generation (2002-2007)

When Driving

Instrument Cluster and Display

M e t e r s a n d G a u g e s

Instrument Cluster

Digital Speedometer Type

Analog Speedometer Type

Type A

Type B

Type C

Steering Switch

Some models.

Speedometer..........................................................................................................page 4-25

Odometer, Trip Meter and Trip Meter Selector ....................................................page 4-26

4

–24

When Driving

Instrument Cluster and Display

Tachometer............................................................................................................page 4-30

Fuel Gauge............................................................................................................page 4-31

Instrument Panel Illumination...............................................................................page 4-32

Outside Temperature Display................................................................................page 4-33

Cruise Control Set Vehicle Speed Display............................................................page 4-33

Active Driving Display.........................................................................................page 4-36

Trip Computer and INFO Switch..........................................................................page 4-33

Speed Unit Selector...............................................................................................page 4-25

Odometer, Trip Meter, Trip Computer and Trip Meter Selector...........................page 4-28

Speedometer

Speed Unit Selector (Digital

Speedometer Type)^*

The speedometer indicates the speed of the

vehicle.

In some countries, you may have to

change the speed units between km/h and

mph.

NOTE

Press the speed unit selector for 1.5

seconds or more.

The speed units for the speedometer will

change between km/h and mph.

(Analog speedometer type)

If a few seconds have elapsed after

switching the ignition off, the needle

may deviate. However, this does not

indicate a problem.

Speed unit selector

Speedometer

*Some models.

4

–25

When Driving

Instrument Cluster and Display

Analog Speedometer Type (Type C)

instrument cluster

Odometer, Trip Meter and Trip

Meter Selector

The display mode can be changed from

odometer to trip meter A to trip meter B

and then back to odometer by pressing the

selector while one of them is displayed.

The selected mode will be displayed.

Digital Speedometer Type/Analog

Speedometer Type (Type A) instrument

cluster

Odometer

Press the selector

Trip meter A

Press the selector

Odometer

Trip meter B

Press the selector

Trip meter A

NOTE

Press the selector

When the ignition is switched to ACC

or off, the odometer or trip meters

cannot be displayed, however, pressing

the selector can inadvertently switch

the trip meters or reset them during an

approximate ten-minute period in the

following cases:

Trip meter B

Press the selector

ꢀ ꢀ

After the ignition is switched to off

from ON.

ꢀ ꢀ

After the driver's door is opened.

Odometer

The odometer records the total distance

the vehicle has been driven.

4

–26

When Driving

Instrument Cluster and Display

Trip meter

NOTE

The trip meter can record the total distance

of two trips. One is recorded in trip meter

A, and the other is recorded in trip meter

B.

ꢀ ꢀ

(Vehicles with type C/type D audio)

If the fuel economy data is reset

ꢀ

using the fuel economy monitor,

or trip A is reset using the trip

meter when the function which

synchronizes the fuel economy

monitor and the trip meter is on, the

fuel economy data and trip A are

reset simultaneously.

Refer to Fuel Economy Monitor on

page 4-91.

Only the trip meters record tenths of

kilometres (miles).

For instance, trip meter A can record the

distance from the point of origin, and

trip meter B can record the distance from

where the fuel tank is ¿lled.

ꢀ

When trip meter A is selected, pressing

the selector again within one second will

change to trip meter B mode.

ꢀ ꢀ

The trip record will be erased when:

When trip meter A is selected, TRIP A

will be displayed. When trip meter B is

selected, TRIP B will be displayed.

ꢀ ꢀ

The power supply is interrupted

(blown fuse or the battery is

disconnected).

The vehicle is driven over 9999.9

The trip meter records the total distance

the vehicle is driven until the meter

is again reset. Return it to “0.0” by

depressing and holding the selector for

one second or more. Use this meter to

measure trip distances and to compute fuel

consumption.

ꢀ ꢀ

km (mile).

4

–27

When Driving

Instrument Cluster and Display

Odometer

Odometer, Trip Meter, Trip

Computer and Trip Meter Selector

The odometer records the total distance

the vehicle has been driven.

The display mode can be changed

between trip meter A and trip meter B by

pressing the selector while one of them

is displayed. The selected mode will be

displayed.

Trip meter

The trip meter can record the total distance

of two trips. One is recorded in trip meter

A, and the other is recorded in trip meter

B.

Selector

For instance, trip meter A can record the

distance from the point of origin, and

trip meter B can record the distance from

where the fuel tank is ¿lled.

When trip meter A is selected, pressing

the selector again within one second will

change to trip meter B mode.

When trip meter A is selected, TRIP A

will be displayed. When trip meter B is

selected, TRIP B will be displayed.

The trip meter records the total distance

the vehicle is driven until the meter is

again reset. Return it to “0.0” by holding

the selector depressed for 1 second

or more. Use this meter to measure

trip distances and to compute fuel

consumption.

Odometer

Trip meter A

Trip meter B

Distance-to-empty mode

Current fuel economy mode

NOTE

When the ignition is switched to ACC

or off, the odometer or trip meters

cannot be displayed, however, pressing

the selector can inadvertently switch

the trip meters or reset them during an

approximate ten-minute period in the

following cases:

ꢀ ꢀ

After the ignition is switched to off

from ON.

ꢀ ꢀ

After the driver's door is opened.

4

–28

When Driving

Instrument Cluster and Display

Distance-to-empty mode

NOTE

This mode displays the approximate

distance you can travel on the remaining

fuel based on the fuel economy.

The distance-to-empty will be calculated

and displayed every second.

ꢀ ꢀ

(Vehicles with type C/type D audio)

ꢀ

If the fuel economy data is reset

using the fuel economy monitor,

or trip A is reset using the trip

meter when the function which

synchronizes the fuel economy

monitor and the trip meter is on, the

fuel economy data and trip A are

reset simultaneously.

Refer to Fuel Economy Monitor on

page 4-91.

Only the trip meters record tenths of

kilometres (miles).

NOTE

ꢀ

ꢀ ꢀ

Even though the distance-to-empty

ꢀ ꢀ

display may indicate a suf¿cient

amount of remaining driving distance

before refuelling is required, refuel

as soon as possible if the fuel level

is very low or the low fuel warning

light illuminates.

The trip record will be erased when:

ꢀ ꢀ

The power supply is interrupted

(blown fuse or the battery is

disconnected).

The vehicle is driven over 9999.9

ꢀ ꢀ

The display may not change unless

ꢀ ꢀ

you add more than approximately 9 L

(2.3 US gal, 1.9 Imp gal) of fuel.

The distance-to-empty is the

km (mile).

ꢀ ꢀ

approximate remaining distance the

vehicle can be driven until all the

graduation marks in the fuel gauge

indicating the remaining fuel supply

disappear.

Trip Computer

The following information can be selected

by pressing the selector with the ignition

switched ON.

ꢀ ꢀ

If there is no past fuel economy

information such as after ¿rst

ꢀ ꢀ

Approximate distance you can travel on

the available fuel

Current fuel economy

purchasing your vehicle or the

information is deleted when the

battery leads are disconnected, the

actual distance-to empty/range may

differ from the amount indicated.

ꢀ ꢀ

If you have any problems with your trip

computer, consult an expert repairer,

we recommend an Authorised Mazda

Repairer.

4

–29

When Driving

Instrument Cluster and Display

Tachometer^*

Current fuel economy mode

This mode displays the current fuel

economy by calculating the amount of fuel

consumption and the distance travelled.

Current fuel economy will be calculated

and displayed every 2 seconds.

The tachometer shows engine speed in

thousands of revolutions per minute (rpm).

CAUTION

Do not run the engine with the

tachometer needle in the RED ZONE.

This may cause severe engine damage.

Type A

When you've slowed to about 5 km/h (3

mph), - - - L/100 km (- - - mpg) will be

displayed.

*1

Striped zone

*1

Red zone

*1

The range varies depending on the type

of gauge.

Type B

*1

Striped zone

*1

Red zone

*1

The range varies depending on the type

of gauge.

*Some models.

4

–30

When Driving

Instrument Cluster and Display

If the low fuel warning light illuminates or

the fuel level is very low, refuel as soon as

possible.

Refer to Warning/Indicator Lights on page

4-38.

NOTE

When the tachometer needle enters the

STRIPED ZONE, this indicates to the

driver that the gears should be shifted

before entering the RED ZONE.

NOTE

ꢀ ꢀ

After refuelling, it may require some

Fuel Gauge

time for the indicator to stabilize. In

addition, the indicator may deviate

while driving on a slope or curve

since the fuel moves in the tank.

The fuel gauge shows approximately

how much fuel is remaining in the tank

when the ignition is switched ON. We

recommend keeping the tank over 1/4 full.

Digital Speedometer type/Type A

instrument cluster/Type B instrument

cluster

ꢀ ꢀ

The display indicating a quarter

or less remaining fuel has more

segments to show the remaining fuel

level in greater detail.

ꢀ ꢀ

The direction of the arrow (

)

indicates that the fuel-¿ller Àap is on

the left side of the vehicle.

Full

(SKYACTIV-D 1.5)

If inconsistency in engine performance

or stalling occurs due to low fuel level

conditions, refuel the vehicle as soon as

possible and add at least 10 L (2.7 US gal,

2.2 Imp gal) of fuel.

1/4 Full

Type C instrument cluster

Full

1/4 Full

4

–31

When Driving

Instrument Cluster and Display

Function for cancelling illumination

dimmer

Instrument Panel Illumination

When the position lights are turned

on with the ignition switched ON,

the brightness of the instrument panel

illumination is dimmed.

The illumination dimmer can be

cancelled by rotating the instrument panel

illumination knob to the right until a beep

sound is heard while the instrument cluster

is dimmed with the ignition switched

ON. If the instrument cluster's visibility

is reduced due to glare from surrounding

brightness, cancel the illumination

dimmer.

NOTE

When the position lights are turned on,

the position lights indicator light in the

instrument cluster turns on.

Refer to Headlights on page 4-60.

NOTE

The brightness of the instrument panel

and instrument panel illuminations can be

adjusted by rotating the knob.

ꢀ ꢀ

When the illumination dimmer is

cancelled, the instrument cluster

cannot be dimmed even if the

position lights are turned on.

ꢀ ꢀ

The brightness decreases by rotating the

ꢀ ꢀ

When the illumination dimmer is

knob to the left. A beep sound will be

heard when the knob has been rotated to

the maximum dim position.

cancelled, the screen in the centre

display switches to constant display

of the daytime screen.

ꢀ ꢀ

The brightness increases by rotating the

knob to the right.

Dim

Bright

4

–32

When Driving

Instrument Cluster and Display

Outside Temperature Display^*

Trip Computer and INFO Switch

When the ignition is switched ON, the

outside temperature is displayed.

The following information can be selected

by pressing the up or down part of the

INFO switch with the ignition switched

ON.

ꢀ ꢀ

Approximate distance you can travel on

the available fuel

Average fuel economy

Current fuel economy

Average vehicle speed

ꢀ ꢀ

NOTE

ꢀ ꢀ

*

ꢀ ꢀ

Under the following conditions, the

outside temperature display may differ

from the actual outside temperature

depending on the surroundings and

vehicle conditions:

Vehicle speed alarm

If you have any problems with your trip

computer, consult an expert repairer,

we recommend an Authorised Mazda

Repairer.

ꢀ ꢀ

Signi¿cantly cold or hot

Distance-to-empty mode

temperatures.

Sudden changes in outside

ꢀ ꢀ

This mode displays the approximate

distance you can travel on the remaining

fuel based on the fuel economy.

temperature.

The vehicle is parked.

The vehicle is driven at low

ꢀ ꢀ

speeds.

The distance-to-empty will be calculated

and displayed every second.

(European model)

Cruise Control Set Vehicle Speed

Display^*

(Except European model)

The vehicle speed preset using the cruise

control is displayed.

*Some models.

4

–33

When Driving

Instrument Cluster and Display

To clear the data being displayed, press the

INFO button for more than 1.5 seconds.

After pressing the INFO button, - - - L/100

km (- - - mpg) will be displayed for about

1 minute before the fuel economy is

recalculated and displayed.

NOTE

ꢀ ꢀ

Even though the distance-to-empty

display may indicate a suf¿cient

amount of remaining driving distance

before refuelling is required, refuel

as soon as possible if the fuel level

is very low or the low fuel warning

light illuminates.

Current fuel economy mode

This mode displays the current fuel

economy by calculating the amount of fuel

consumption and the distance travelled.

ꢀ ꢀ

The display may not change unless

you add more than approximately 9 L

(2.3 US gal, 1.9 Imp gal) of fuel.

The distance-to-empty is the

Current fuel economy will be calculated

and displayed every 2 seconds.

(European model)

ꢀ ꢀ

approximate remaining distance

the vehicle can be driven until all

the graduation marks in the fuel

gauge (indicating the remaining fuel

supply) disappear.

(Except European model)

ꢀ ꢀ

If there is no past fuel economy

information such as after ¿rst

purchasing your vehicle or the

information is deleted when the

battery leads are disconnected, the

actual distance-to empty/range may

differ from the amount indicated.

When you've slowed to about 5 km/h (3

mph), - - - L/100 km (- - - mpg) will be

displayed.

Average vehicle speed mode

This mode displays the average vehicle

speed by calculating the distance and the

time travelled since connecting the battery

or resetting the data.

Average vehicle speed will be calculated

and displayed every 10 seconds.

(European model)

Average fuel economy mode

This mode displays the average fuel

economy by calculating the total fuel

consumption and the total travelled

distance since purchasing the vehicle, re-

connecting the battery after disconnection,

or resetting the data. The average fuel

economy is calculated and displayed every

minute.

(Except European model)

(European model)

(Except European model)

4

–34

When Driving

Instrument Cluster and Display

To clear the data being displayed, press the

INFO button for more than 1.5 seconds.

After pressing the INFO button, - - - km/h

(- - - mph) will be displayed for about

1 minute before the vehicle speed is

recalculated and displayed.

3. Press the up or down part of the

INFO switch to select the desired

vehicle speed.

4. Press the INFO button until the beep

sounds.

Vehicle speed alarm mode^*

In this mode, the current setting for the

vehicle speed alarm is displayed. You can

change the vehicle speed setting at which

the warning is triggered.

NOTE

The vehicle speed alarm display is

activated at the same time the beep

sound is heard. The set vehicle speed

Àashes several times.

The vehicle speed alarm can be set using

the INFO switch.

NOTE

ꢀ ꢀ

Always set the vehicle speed

according to the laws and regulations

of the country/city in which the

vehicle is driven. In addition, always

verify the speed of the vehicle using

the speedometer.

ꢀ ꢀ

The vehicle speed alarm function can

be set between 30 and 250 km/h (20

and 150 mph).

The vehicle speed alarm can be set using

the following procedure.

1. Press the INFO switch on the speed

alarm screen.

2. Press the INFO button until the beep

sounds.

*Some models.

4

–35

When Driving

Instrument Cluster and Display

Active Driving Display^*

Mirror

Combiner

Optical receiver

WARNING

Always adjust the display brightness and position with the vehicle stopped:

Adjusting the display brightness and position while driving the vehicle is dangerous as

doing so could distract your attention from the road ahead and lead to an accident.

CAUTION

ꢀ ꢀ

Do not try to adjust the angle or open/close the active driving display manually.

Fingerprints on the display will make it dif¿cult to view and using excessive force

when operating it could cause damage.

Do not place objects in the vicinity of the active driving display. The active driving

ꢀ ꢀ

display may not operate or any interference with its operation could cause damage.

Do not place beverages near the active driving display. If water or other liquids are

ꢀ ꢀ

splashed on the active driving display, it could cause damage.

Do not place objects above the active driving display screen or apply stickers to the

ꢀ ꢀ

combiner as they will cause interference.

A sensor is integrated to control the display's luminosity. If the optical receiver is

ꢀ ꢀ

covered, the display's luminosity will lower making the display dif¿cult to view.

Do not allow intense light to hit the optical receiver. Otherwise, it could cause damage.

ꢀ ꢀ

*Some models.

4

–36

When Driving

Instrument Cluster and Display

NOTE

ꢀ ꢀ

It may be dif¿cult to view the display when wearing sunglasses. Take off your

sunglasses or adjust the luminosity.

ꢀ ꢀ

If the battery has been removed and re-installed or the battery voltage is low, the

adjusted position may deviate.

The display may be dif¿cult to view or temporarily affected by weather conditions

such as rain, snow, light, and temperature.

If the audio system is removed, the active driving display cannot be operated.

The active driving display indicates the following information:

ꢀ ꢀ

Lane Departure Warning System (LDWS) Operation Conditions and Warnings

Refer to Lane Departure Warning System (LDWS) on page 4-105.

Smart City Brake Support (SCBS) Operation Conditions

Refer to Smart City Brake Support (SCBS) on page 4-126.

Adjustable Speed Limiter Operation Conditions and Warnings

Refer to Adjustable Speed Limiter on page 4-121.

Vehicle Speed Setting Using Cruise Control

Refer to Cruise Control on page 4-138.

ꢀ

ꢀ ꢀ

ꢀ

ꢀ ꢀ

ꢀ

ꢀ ꢀ

ꢀ

ꢀ ꢀ

Turn-by-Turn (TBT) (Direction and Distance) and Lane Guidance

Vehicle Speed

ꢀ ꢀ

Each setting/adjustment for the active driving display can be performed on the centre

display (Type C/Type D audio).

1. Select the

icon on the home screen and display the Settings screen.

2. Select the AD-Disp tab.

3. Select the desired item and perform the setting/adjustment.

ꢀ

Height : Active driving display position

ꢀ

Brightness Control : Method for adjusting screen brightness (Automatically/Manually)

Calibration : Brightness initialization setting (when selecting automatic adjustment)

Brightness : Brightness adjustment (when selecting manual adjustment)

Navigation : On/Off

Active Driving Display : On/Off

Reset

ꢀ

4

–37

When Driving

Instrument Cluster and Display

Warning/Indicator Lights

Instrument Cluster varies depending on model and speci¿cations.

Instrument Cluster

Digital Speedometer Type

Analog Speedometer Type

Type A

Type B

Type C

Centre of Instrument panel

Warning/Indicator lights will appear in any of the highlighted areas

4

–38

When Driving

Instrument Cluster and Display

Warning Lights

These lights turn on or Àash to notify the user of the system operation status or a system

malfunction.

Signal

Warning Lights

Page

Master Warning Light^*1

7-35

Brake System Warning Light^*1*2

ABS Warning Light^*1

7-35

Charging System Warning Light^*1

Engine Oil Warning Light^*1

Check Engine Light^*1

7-35

High Engine Coolant Temperature Warning Light^*1

7-35

(Red)

^*i-stop Warning Light^*1

4-18

7-35

(Amber)

^*i-ELOOP Warning Light

^*Automatic Transaxle Warning Light^*1

7-35

Power Steering Malfunction Indicator Light^*1

Air Bag/Seat Belt Pretensioner System Warning Light^*1

Low Fuel Warning Light

7-35

*Some models.

4

–39

When Driving

Instrument Cluster and Display

Signal

Warning Lights

Page

Seat Belt Warning Light (Front seat)

7-35

^*Seat Belt Warning Light (Rear seat)

Door-Ajar Warning Light

7-35

(Red)

^*120 km/h Warning Light^*1

7-35

^*Low Washer Fluid Level Warning Light

^*Tyre Pressure Monitoring System Warning Light^*1

KEY Warning Light^*1

7-35

(Red)

^*Smart City Brake Support (SCBS) Warning Light

7-35

(Amber)

Illuminated 7-35

Flashing 4-110

^*Lane Departure Warning System (LDWS) Warning Light^*1

^*High Beam Control System (HBC) Warning Light^*1

^*LED Headlight Warning Light

7-35

(Amber)

*1 The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or

when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an

expert repairer, we recommend an Authorised Mazda Repairer.

*2 The light turns on continuously when the parking brake is applied.

*Some models.

4

–40

When Driving

Instrument Cluster and Display

Indicator Lights

These lights turn on or Àash to notify the user of the system operation status or a system

malfunction.

Signal

Indicator Lights

Page

^*Blind Spot Monitoring (BSM) OFF Indicator Light^*1

4-116

^*Lane Departure Warning System (LDWS) OFF Indicator

Light^*1

4-108

3-8

KEY Indicator Light

(Green)

^*Seat Belt Indicator Light (Rear seat)

2-18

^*High Beam Control System (HBC) Indicator Light

^*Glow Indicator Light^*1

4-104

4-44

(Green)

^*Diesel Particulate Filter Indicator Light^*1

^*Wrench Indicator Light^*1

4-147

4-43

^*TCS/DSC Indicator Light^*1

^*DSC OFF Indicator Light^*1

4-85, 4-86

4-87

^*Smart City Brake Support (SCBS) Indicator Light^*1

^*Smart City Brake Support (SCBS) OFF Indicator Light^*1

4-130

(Red)

*Some models.

4

–41

When Driving

Instrument Cluster and Display

Signal

Indicator Lights

Page

^*i-stop Indicator Light

4-18

(Green)

^*i-ELOOP Indicator Light

4-90

4-44

(Green)

(Blue)

Low Engine Coolant Temperature Indicator Light

^*Shift Position Indication

4-49

Headlight High-Beam Indicator Light

4-65, 4-65

4-70, 4-77

Direction Indicator/Hazard Warning Indicator Lights

Security Indicator Light^*1

3-42

^*Cruise Main Indicator Light

4-139

(Amber)

(Green)

^*Cruise Set Indicator Light

4-139

4-123

^*Adjustable Speed Limiter Main Indicator Light

(Amber)

(Green)

^*Adjustable Speed Limiter Set Indicator Light

4-123

^*Select Mode Indicator Light

Lights-On Indicator Light

4-98

4-60

^*Front Fog Light Indicator Light

4-67

*Some models.

4

–42

When Driving

Instrument Cluster and Display

Signal

Indicator Lights

^*Rear Fog Light Indicator Light

Page

4-68

*1 The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or

when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an

expert repairer, we recommend an Authorised Mazda Repairer.

Wrench Indicator Light

SKYACTIV-D 1.5

The wrench indicator light turns on under

the following conditions:

ꢀ ꢀ

The engine oil has deteriorated.

The engine oil level is around the MIN

ꢀ ꢀ

mark on the dipstick or it is less than the

MIN mark.^*

ꢀ ꢀ

The engine oil level is around the X

When the ignition is switched ON, the

wrench indicator light turns on and then

turns off after a few seconds.

mark on the dipstick or it exceeds the X

mark.^*

Check the engine oil. Refer to Inspecting

Engine Oil Level on page 6-28.

Replace the engine oil if the wrench

indicator light does not turn off even

though the engine oil level is in the normal

range.

The wrench indicator light turns on

when the preset maintenance period

arrives. Verify the content and perform

maintenance.

Refer to Maintenance Monitor on page

6-15.

NOTE

ꢀ ꢀ

Depending on the vehicle use

conditions, the wrench indicator light

may turn on for reasons other than

the preset maintenance period.

ꢀ ꢀ

Whenever the engine oil is replaced,

a reset of the vehicle engine control

unit is necessary.

Your Authorised Mazda Repairer

ꢀ

will be able to reset the engine

control unit or see page 6-27 for

the Vehicle engine control unit reset

procedure.

*Some models.

4

–43

When Driving

Instrument Cluster and Display

Low Engine Coolant Temperature

Indicator Light (Blue)

The light illuminates continuously when

the engine coolant temperature is low and

turns off after the engine is warm.

If the low engine coolant temperature

indicator light remains illuminated after

the engine has been suf¿ciently warmed

up, the temperature sensor could have a

malfunction. Consult an expert repairer,

we recommend an Authorised Mazda

Repairer.

Glow Indicator Light

(SKYACTIV-D 1.5)

This light may illuminate when the

ignition is switched ON.

It turns off when the glow plugs are warm.

If the ignition is left switched ON for a

long period of time without the engine

running after the glow plugs are warmed

up, the glow plugs may warm up again

which will illuminate the glow indicator

light.

4

–44

When Driving -> Instrument Cluster and Display for Your Mazda 2 SUV First Generation (2002-2007)

Related Topics

Popular Owner Manuals

Latest Owner Manuals