2014-2018 Mazda 3 4 Door Specifications User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Specifications for Your Mazda 3 4 Door Third Generation (2014-2018)

Specifications  
9
Technical information about your Mazda.  
Identification Numbers...................................................................... 9-2  
Vehicle Information Labels........................................................... 9-2  
Specifications ...................................................................................... 9-4  
Specifications ................................................................................ 9-4  
Personalization Features ................................................................. 9-12  
Personalization Features ............................................................. 9-12  
9
1  
Specifications  
Identification Numbers  
For vehicle identification number  
beginning with 3MZ*1  
Vehicle Information Labels  
Vehicle Identification Number  
The vehicle identification number legally  
identifies your vehicle. The number is on a  
plate attached to the cowl panel located on  
the left corner of the dashboard. This plate  
can easily be seen through the windshield.  
*1 Check the vehicle identification number  
on the vehicle identification number  
plate. Refer to Vehicle Identification  
Number on page 9-2.  
Chassis Number  
Open the cover shown in the figure to  
check the chassis number.  
Motor Vehicle Safety Standard  
Label (U.S.A. and Canada)  
For vehicle identification number  
beginning with JM1*1  
9
2  
Specifications  
Identification Numbers  
For vehicle identification number  
beginning with 3MZ*1  
Vehicle Emission Control  
Information Label (U.S.A. and  
Canada)  
*1 Check the vehicle identification number  
on the vehicle identification number  
plate. Refer to Vehicle Identification  
Number on page 9-2.  
Tire Pressure Label  
For vehicle identification number  
beginning with JM1*1  
Engine Number  
Forward  
9
3  
Specifications  
Specifications  
Specifications  
Engine  
Specification  
Item  
SKYACTIV-G 2.0  
SKYACTIV-G 2.5  
Type  
DOHC-16V in-line, 4-cylinder  
Bore × Stroke  
Displacement  
Compression ratio  
83.5 × 91.2 mm (3.29 × 3.59 in)  
1,997.6 ml (1,997.6 cc)  
89.0 × 100 mm (3.50 × 3.94 in)  
2,488.5 ml (2,488.5 cc)  
13.0  
Electrical System  
Item  
Classification  
Q-85*1  
Battery  
12V-60Ah/20HR*2 or 12V-65Ah/20HR*2  
Mazda Genuine spark  
plug*3  
Spark-plug number  
PE5R-18-110 or PE5S-18-110  
*1 Q-85 is designed for i-ELOOP system. Only Q-85 should be used to ensure correct operation of i-ELOOP  
system. Consult an Authorized Mazda Dealer for details.  
*2 Not for i-ELOOP system.  
*3 This spark plug provides the SKYACTIV-G engine with optimum performance. Contact an Authorized Mazda  
Dealer for details.  
CAUTION  
When cleaning the iridium plugs, do not use a wire brush. The ꢀne particulate coating on  
the iridium alloy and platinum tips could be damaged.  
9
4  
Specifications  
Specifications  
Lubricant Quality  
Lubricant  
Classification  
Engine oil  
Refer to Recommended Oil on page 6-27.  
GL-4  
API Service  
SAE  
Manual transaxle oil  
75W-80  
Automatic transaxle fluid  
Brake/Clutch fluid  
Mazda Genuine ATF FZ  
SAE J1703 or FMVSS116 DOT-3  
NOTE  
Refer to Introduction on (page 6-2) for owner's responsibility in protecting your investment.  
Capacities  
(Approximate Quantities)  
Item  
Capacity  
With oil filter replacement  
Without oil filter replacement  
With oil filter replacement  
Without oil filter replacement  
4.2 L (4.4 US qt, 3.7 Imp qt)  
4.0 L (4.2 US qt, 3.5 Imp qt)  
4.5 L (4.8 US qt, 4.0 Imp qt)  
4.3 L (4.5 US qt, 3.8 Imp qt)  
6.3 L (6.7 US qt, 5.5 Imp qt)  
SKYACTIV-G  
2.0  
Engine oil  
SKYACTIV-G  
2.5  
For vehicle  
Manual transaxle  
identification  
number beginning  
with JM1*1  
Automatic transaxle  
Manual transaxle  
6.5 L (6.9 US qt, 5.7 Imp qt)  
6.7 L (7.1 US qt, 5.9 Imp qt)  
6.9 L (7.3 US qt, 6.1 Imp qt)  
SKYACTIV-G  
2.0  
For vehicle  
identification  
number beginning  
with 3MZ*1  
Coolant  
Automatic transaxle  
Manual transaxle  
Automatic transaxle  
Manual transaxle  
Automatic transaxle  
6.5 L (6.9 US qt, 5.7 Imp qt)  
6.8 L (7.2 US qt, 6.0 Imp qt)  
6.5 L (6.9 US qt, 5.7 Imp qt)  
6.7 L (7.1 US qt, 5.9 Imp qt)  
1.70 L (1.80 US qt, 1.50 Imp qt)  
7.8 L (8.2 US qt, 6.9 Imp qt)  
50.0 L (13.2 US gal, 11.0 Imp gal)  
51.0 L (13.5 US gal, 11.2 Imp gal)  
U.S.A. and  
Canada  
SKYACTIV-G  
2.5  
Mexico  
Manual transaxle oil  
Automatic transaxle fluid  
U.S.A. and Canada  
Mexico  
Check oil and fluid levels with dipsticks or reservoir gauges.  
Fuel tank  
*1 Check the vehicle identification number on the vehicle identification number plate. Refer to Vehicle  
Identification Number on page 9-2.  
9
5  
Specifications  
Specifications  
Dimensions  
4-Door  
(U.S.A. and Canada)  
Item  
Vehicle specification  
4,580 mm (180.3 in)  
1,795 mm (70.7 in)  
1,455 mm (57.3 in)  
1,555 mm (61.2 in)  
1,560 mm (61.4 in)  
2,700 mm (106.3 in)  
Overall length  
Overall width  
Overall height  
Front tread  
Rear tread  
Wheelbase  
(Mexico)  
Item  
Vehicle specification  
4,580 mm (180.3 in)  
1,795 mm (70.7 in)  
1,450 mm (57.1 in)  
1,555 mm (61.2 in)  
1,560 mm (61.4 in)  
2,700 mm (106.3 in)  
Overall length  
Overall width  
Overall height  
Front tread  
Rear tread  
Wheelbase  
5-Door  
(U.S.A. and Canada)  
Item  
Vehicle specification  
4,460 mm (175.6 in)  
1,795 mm (70.7 in)  
1,470 mm (57.9 in)  
1,455 mm (57.3 in)  
1,555 mm (61.2 in)  
1,560 mm (61.4 in)  
2,700 mm (106.3 in)  
Overall length  
Overall width  
Type A  
Type B  
Overall height*1  
Front tread  
Rear tread  
Wheelbase  
9
6  
Specifications  
Specifications  
(Mexico)  
Item  
Vehicle specification  
Overall length  
Overall width  
4,460 mm (175.6 in)  
1,795 mm (70.7 in)  
1,465 mm (57.7 in)  
1,450 mm (57.1 in)  
1,555 mm (61.2 in)  
1,560 mm (61.4 in)  
2,700 mm (106.3 in)  
Type A  
Type B  
Overall height*1  
Front tread  
Rear tread  
Wheelbase  
*1 The overall height is categorized according to the antenna type as follows:  
Type A  
Antenna  
Type B  
Except above.  
Weights  
U.S.A. and Canada  
SKYACTIV-G 2.0  
Weight  
Item  
Manual transaxle  
Automatic transaxle  
1,815 kg (4,001 lbs)  
975 kg (2,149 lbs)  
848 kg (1,870 lbs)  
GVWR (Gross Vehicle Weight Rating)  
GAWR (Gross Axle Weight Rating)  
1,772 kg (3,907 lbs)  
925 kg (2,039 lbs)  
855 kg (1,885 lbs)  
Front  
Rear  
SKYACTIV-G 2.5  
Item  
Weight  
Manual transaxle  
1,815 kg (4,001 lbs)  
970 kg (2,138 lbs)  
865 kg (1,907 lbs)  
Automatic transaxle  
1,847 kg (4,072 lbs)  
997 kg (2,198 lbs)  
854 kg (1,883 lbs)  
GVWR (Gross Vehicle Weight Rating)  
GAWR (Gross Axle Weight Rating)  
Front  
Rear  
9
7  
Specifications  
Specifications  
Mexico  
SKYACTIV-G 2.0  
Weight  
Item  
Manual transaxle  
1,815 kg (4,001 lbs)  
920 kg (2,028 lbs)  
895 kg (1,973 lbs)  
945 kg (2,083 lbs)  
945 kg (2,083 lbs)  
Automatic transaxle  
1,835 kg (4,045 lbs)  
940 kg (2,072 lbs)  
895 kg (1,973 lbs)  
965 kg (2,127 lbs)  
945 kg (2,083 lbs)  
Total  
Front  
Rear  
Front  
Rear  
GVW (Gross Vehicle Weight)  
GAW (Permissible axle load)  
SKYACTIV-G 2.5  
Item  
Weight  
Total  
Front  
Rear  
Front  
Rear  
1,865 kg (4,112 lbs)  
970 kg (2,138 lbs)  
895 kg (1,973 lbs)  
995 kg (2,194 lbs)  
945 kg (2,083 lbs)  
GVW (Gross Vehicle Weight)  
GAW (Permissible axle load)  
Air Conditioner  
The type of refrigerant used is indicated on a label attached to the inside of the engine  
compartment. Check the label before recharging the refrigerant. Refer to Climate Control  
System on page 5-2.  
Item  
Classification  
Refrigerant Type  
HFC134a (R-134a)  
9
8  
Specifications  
Specifications  
Light Bulbs  
Exterior light  
Category  
Light bulb  
Wattage  
65  
UNECE*1 (SAE)  
HB3 (9005)  
H11 (H11)  
D4S (D4S)  
HB3 (9005)  
— (—)  
High beam  
Halogen  
Xenon fusion  
Headlights  
Low beam  
55  
High/Low beam  
35  
With halogen bulb headlights  
65  
Daytime  
running lights  
With xenon fusion bulb headlights  
LED*2  
Parking lights  
(Front side-  
marker lights)  
With halogen bulb headlights  
5
WY5W (—)  
W5W (—)  
Front side-  
marker lights  
With xenon fusion bulb headlights  
With xenon fusion bulb headlights  
5
Parking lights  
LED*2  
21  
— (—)  
WY21W (7443NA)  
H11 (H11)  
Front turn signal lights  
Fog lights*  
55  
Side turn signal lights*  
High-mount brake light  
Rear turn signal lights  
LED*2  
LED*2  
21  
— (—)  
— (—)  
WY21W (7443NA)  
— (—)  
Brake lights/  
Taillights/Rear  
side-marker  
lights  
LED type  
LED*2  
Bulb type  
21/5  
W21/5W (7443)  
Taillights (Liftgate side/Trunk lid side)*  
LED*2  
18  
— (—)  
4–Door  
Reverse lights  
5–Door  
W16W (921)  
W21W (7440)  
W5W (—)  
21  
License plate lights  
5
*1 UNECE stands for United Nations Economic Commission for Europe.  
*2 LED is the abbreviation for Light Emitting Diode.  
*Some models.  
9
9  
Specifications  
Specifications  
Interior light  
Category  
UNECE*1  
Light bulb  
Wattage  
Trunk light (4–Door)  
3
5
Luggage compartment light (5–Door)  
Overhead lights (Front)/Map lights*  
Overhead light (Front)*  
8
10  
10  
2
Overhead light (Rear)*  
Vanity mirror lights*  
*1 UNECE stands for United Nations Economic Commission for Europe.  
Tires  
NOTE  
The tires have been optimally matched with the chassis of your vehicle.  
When replacing tires, Mazda recommends that you replace tires of the same type originally  
fitted to your vehicle. For details, contact an Authorized Mazda Dealer.  
Check the tire pressure label for tire size and inflation pressure.  
Refer to Tire Inflation Pressure on page 6-42.  
After adjusting the tire pressure, initialization of the tire pressure monitoring system is  
necessary to make the system operates normally.  
Refer to Tire Pressure Monitoring System Initialization on page 4-106.  
Standard tire  
(U.S.A. and Canada)  
Inflation pressure  
Tire size  
Front  
Rear  
P205/60R16 91H  
215/45R18 89W  
250 kPa (36 psi)  
250 kPa (36 psi)  
250 kPa (36 psi)  
250 kPa (36 psi)  
*Some models.  
9
10  
Specifications  
Specifications  
(Mexico)  
Inflation pressure  
Tire size  
P205/60R16 91H  
Front  
Rear  
250 kPa (2.5 bar, 36 psi)  
250 kPa (2.5 bar, 36 psi)  
Inflation pressure  
Tire size  
Up to 3 persons  
—Full load  
Front  
Rear  
240 kPa (2.4 bar, 35 psi)  
230 kPa (2.3 bar, 33 psi)  
280 kPa (2.8 bar, 41 psi)  
300 kPa (3.0 bar, 44 psi)  
215/45R18 89W  
1 person's weight: About 75 kg  
Temporary spare tire  
Tire size  
Inflation pressure  
420 kPa (60 psi)  
T125/70D16 96M  
Lug nut tightening torque  
When installing a tire, tighten the lug nut to the following torque.  
108—147 N•m (12—14 kgf•m, 80—108 ft•lbf)  
Fuses  
Refer to Fuses on page 6-59.  
9
11  
Specifications  
Personalization Features  
Personalization Features  
The following personalization features can be set or changed by an Authorized Mazda  
Dealer. Consult an Authorized Mazda Dealer for details.  
Additionally, some of the personalization features can be changed by the customer  
depending on the feature.  
Personalization features which can be changed differ depending on the market and  
specification.  
Settings can be changed by operating the center display screen.  
Settings can be changed by operating the vehicle switches.  
Settings can be changed by an Authorized Mazda Dealer.  
Settings change method  
Factory  
Setting  
Available  
Settings  
Item  
Feature  
The system can be  
changed so that  
Forward Obstruction  
Warning (FOW)  
does not operate.*1  
Refer to  
Settings  
on page  
5-55.  
On  
On/Off  
Forward  
Obstruction  
Warning  
(FOW)  
Refer to  
Forward  
Obstruction can be changed.  
Warning  
(FOW) on  
The distance at  
which the collision  
warning activates  
Refer to  
Settings  
on page  
5-55.  
Near  
High  
Near/Far  
page 4-115.  
The volume of the  
collision warning  
can be changed.  
Refer to  
Settings  
on page  
5-55.  
High/Low/  
Off  
Safety  
Smart  
City Brake  
Support  
(SCBS)  
Refer to  
Smart  
City Brake  
Support  
(SCBS) on  
page 4-71.  
The system can be  
changed so that  
Smart City Brake  
Support (SCBS)  
does not operate.*1  
Refer to  
Settings  
on page  
5-55.  
On  
On/Off  
9
12  
Specifications  
Personalization Features  
Settings change method  
Available  
Settings  
Factory  
Setting  
Item  
Feature  
The warning  
sound for the Lane  
Departure Warning  
System (LDWS) can  
be changed.*2  
Refer to  
Beep  
High  
Beep/Rumbl.  
Settings  
on page  
5-55.  
The  
volume  
of the  
warning  
sound for  
the Lane  
Departure  
Warning  
System  
Refer to  
Settings  
on page  
5-55.  
High/Mid/  
Low  
Rumbl.  
Beep  
Lane  
Departure  
Warning  
System  
(LDWS)  
Refer  
to Lane  
Departure  
Warning  
System  
Refer to  
Settings  
on page  
5-55.  
High  
Low  
High/Low  
High/Low  
(LDWS)  
can be  
changed.  
The sensitivity of  
the warning for the  
Lane Departure  
Warning System  
(LDWS) can be  
changed.  
Refer to  
Settings  
on page  
5-55.  
(LDWS) on  
page 4-118.  
Safety  
The warning timing  
in which the Lane  
Departure Warning  
System (LDWS)  
determines that  
the vehicle may be  
deviating from its  
lane can be changed.  
Refer to  
Settings  
on page  
5-55.  
Before  
At/Before  
Blind Spot  
Monitoring  
(BSM)  
system  
Refer to  
Blind Spot  
Monitoring  
(BSM)  
The volume of the  
BSM warning beep  
can be changed.*3  
High/  
Low/  
Off  
Refer to  
Settings  
on page  
5-55.  
High  
System on  
page 4-107.  
9
13  
Specifications  
Personalization Features  
Settings change method  
Factory  
Setting  
Available  
Settings  
Item  
Feature  
Lock: Out of  
Park Unlock:  
In Park/  
Lock:  
Shifting Out  
of Park/  
Lock: When  
Driving  
Unlock: IGN  
Off/  
Changes the auto  
Power door lock/unlock function  
lock  
Refer to  
setting for all the  
doors according to  
Lock: When  
Driving  
Unlock: IGN  
Off  
Refer to  
Auto Lock/  
Unlock  
Function on  
page 3-16.  
Refer to  
Auto Lock/ the vehicle speed,  
Unlock the vehicle power  
Function on supply condition,  
Settings  
on page  
5-55.  
page 3-16.  
and the selector  
lever position.  
Lock: When  
Driving/  
Off  
Vehicle  
All Doors:  
Once/  
Driver's:  
Once, All  
Doors: Twice  
The method for  
Driver's: Once,  
All Doors:  
Twice  
Refer to  
Settings  
on page  
5-55.  
unlocking the doors  
using the transmitter  
can be changed.  
Refer to  
Transmitter  
on page 3-4.  
Keyless  
entry system  
Refer to  
Keyless  
Entry  
System on  
page 3-3.  
The time required  
for the doors to  
relock automatically  
after unlocking with  
the transmitter can  
be changed.  
90 seconds/  
60 seconds/  
30 seconds  
Refer to  
Settings  
on page  
5-55.  
60 seconds  
9
14  
Specifications  
Personalization Features  
Settings change method  
Available  
Settings  
Factory  
Setting  
Item  
Feature  
Refer to  
Locking,  
The volume of the  
answer-back beep  
during advanced  
keyless entry system  
operation can be  
changed.  
High/  
Medium/  
Low/  
Unlocking  
with Request  
Switch (With  
the advanced  
keyless  
Refer to  
Settings  
on page  
5-55.  
Medium  
Off  
function) on  
page 3-13.  
The function to  
automatically lock  
the doors when  
leaving the vehicle  
while carrying the  
key can be changed.  
Refer to  
Settings  
on page  
5-55.  
Off  
On/Off  
Advanced  
keyless  
entry system  
Refer to  
Refer to  
Locking,  
Unlocking  
with Request  
Advanced  
Keyless  
Entry  
System on  
page 3-9.  
The method for  
unlocking the doors Driver's: Once,  
All Doors:  
Once/  
Driver's:  
Once, All  
Doors: Twice  
Refer to Switch (With  
Settings the advanced  
using the request  
switch/transmitter  
can be changed.  
All Doors:  
Twice  
on page  
5-55.  
keyless  
function) on  
page 3-13.  
Refer to  
Vehicle  
Transmitter  
on page 3-4.  
The time required  
for the doors to  
relock automatically  
after unlocking with  
the request switch/  
transmitter can be  
changed.  
90 seconds/  
60 seconds/  
30 seconds  
Refer to  
Settings  
on page  
5-55.  
60 seconds  
The time required  
for the interior  
lamp to turn off  
automatically can be  
changed (prevents  
battery depletion  
when a door is open/  
ajar).  
60 minutes/  
30 minutes/  
10 minutes  
Refer to  
Settings  
on page  
5-55.  
30 minutes  
Illumination  
entry  
Refer to  
Illuminated  
Entry  
The time required  
for the interior  
lamp to turn off  
automatically after  
all doors are closed  
can be changed.  
System on  
page 5-136.  
60 seconds/  
30 seconds/  
15 seconds/  
7.5 seconds  
Refer to  
Settings  
on page  
5-55.  
15 seconds  
9
15  
Specifications  
Personalization Features  
Settings change method  
Factory  
Setting  
Available  
Settings  
Item  
Auto-wiper  
control  
Feature  
Refer to  
The auto-wiper  
Refer to  
Windshield control function can  
Wipers and be changed.  
Washer on  
On  
On/Off*4  
Settings  
on page  
5-55.  
page 4-51.  
Daytime  
running  
lights  
Refer to  
Daytime  
Running  
Lights on  
page 4-46.  
The function of the  
daytime running  
lights can be  
On/  
Off  
On  
changed.  
Auto  
headlight  
off*5  
Refer to  
Headlights ignition is switched  
on page  
4-40.  
The time required  
for headlights  
to turn off after  
120 seconds/  
90 seconds/  
60 seconds/  
30 seconds/  
Off*6  
Refer to  
Settings  
on page  
5-55.  
30 seconds  
off can be changed.  
Vehicle  
Auto-light  
control  
Refer to  
Headlights on surrounding  
on page  
4-40.  
The headlight  
illumination on/  
off timing based  
High/  
Med. High/  
Medium/  
Med. Low/  
Low  
Refer to  
Settings  
on page  
5-55.  
Medium  
lightness/darkness  
can be changed.  
High Beam  
Control  
System  
(HBC)  
Refer to  
The High Beam  
Control System  
High Beam (HBC) function can  
Refer to  
Settings  
on page  
5-55.  
On  
On/Off  
Control  
System  
be changed.*1  
(HBC) on  
page 4-47.  
Lights-on  
reminder*7  
Refer to  
Lights-On  
Reminder  
on page  
The volume of the  
lights-on reminder  
warning alarm can  
be changed.  
Refer to  
Settings  
on page  
5-55.  
High/Low/  
Off  
Off  
7-35.  
9
16  
Specifications  
Personalization Features  
Settings change method  
Available  
Settings  
Factory  
Setting  
Item  
Turn  
Feature  
indicator  
Refer to  
Turn and  
Lane-  
Change  
Signals on  
page 4-50.  
The turn indicator  
beep volume level  
can be changed.  
Refer to  
High  
High/Low  
Settings  
on page  
5-55.  
Vehicle  
Three-flash  
turn signal  
Refer to  
Three-Flash function can be  
Turn Signal changed.  
on page  
The three-time flash  
Refer to  
Settings  
on page  
5-55.  
On  
On/Off  
mi/km  
4-51.  
Refer to  
Settings  
on page  
5-55.  
Distance  
unit  
The distance unit  
can be changed.  
mi or km  
English  
°F or °C  
The display  
language can be  
changed.*8  
English/  
French/  
Spanish  
Refer to  
Settings  
on page  
5-55.  
System  
Language  
Refer to  
Settings  
on page  
5-55.  
Temperature The temperature unit  
unit  
°F/°C  
can be changed.  
Setting can be  
changed so that the  
ending display of  
the Fuel Economy  
Monitor is  
Refer  
to Fuel  
Economy  
Monitor  
on page  
4-85.  
Ending  
display  
Fuel  
Off  
On/Off  
Economy  
Monitor  
Refer  
displayed.  
to Fuel  
Economy  
Monitor  
on page  
4-85.  
Setting can be  
Refer  
to Fuel  
Economy  
Monitor  
on page  
4-85.  
Fuel  
changed so that the  
fuel economy reset  
is linked with the  
trip meter reset.  
economy  
resetting  
procedure  
Off  
On/Off  
9
17  
Specifications  
Personalization Features  
Settings change method  
Factory  
Setting  
Available  
Settings  
Item  
Feature  
Active  
driving  
display  
Refer to  
Active  
Driving  
Display  
on page  
4-18.  
Setting can be  
changed so that  
the Turn-by-Turn  
Refer to  
Active  
driving  
display  
on page  
4-18.  
Turn-by-  
On  
On/Off  
Turn (TBT) (TBT) of the Active  
driving display is  
not displayed.  
*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends  
that these systems remain On.  
*2 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed.  
The warning sound is only a beep.  
*3 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The  
volume of the warning beep during Rear Cross Traffic Alert (RCTA) operation cannot be changed.  
*4 If the auto-wiper control is set to Off, the wiper lever position is set to intermittent operation.  
*5 If the setting is changed to Off, the following operation is performed according to the headlight switch position:  
y
At position: Headlights turn off immediately after the ignition is switched off.  
At any position other than : Headlights do not turn off after the ignition is switched off.  
y
*6 When set to Off, the lights-on reminder is operable.  
*7 The setting of the lights-on reminder can be changed with the time setting of auto headlight off function set to  
Off. Refer to Lights-On Reminder on page 7-35.  
*8 Available only in display from the center display.  
9
18  

Related Topics

Popular Owner Manuals