Essential Safety Equipment
Seat Warmer/Heated Steering Wheel
Auto mode
Seat Warmer*
The driver and front passenger's seat
warmer can be operated in auto mode
using the following procedure.
1. If “Occupant Comfort” has been
disabled, enable it using the
following procedure.
Seat Warmer
▼
The front seats can be warmed up
while the engine is running.
While the seat warmer is operating,
the indicator light in the seat warmer
switch turns on according to the set
temperature.
a) Select “Settings” from the Mazda
Connect home screen.
b) Select “Vehicle Settings”.
c) Enable “Occupant Comfort”.
2. Press the AUTO switch.
While in auto mode, the seat
temperature is automatically controlled
in 4 levels (High, Mid, Low, and OFF)
according to the conditions in the
cabin.
Manual mode
When the seat warmer switch is
pressed, the seat warmer operates in
manual mode.
The set temperature changes as shown
in the figure each time the seat warmer
switch is pressed.
NOTE
If the front passenger’s seat belt is
unfastened, the front passenger’s
seat warmer turns oꢀ.
If the seat warmer switch is pressed
during auto mode, the seat warmer
on the side where the switch was
pressed switches to manual mode.
To return to auto mode, press the
AUTO switch.
If the engine is turned oꢀ while the
1. OFF
2. High
3. Mid
4. Low
seat warmer is operating in auto
mode, the seat warmer operates in
auto mode again the next time the
engine is turned on.
NOTE
If the engine is turned oꢀ while the
seat warmer is operating in manual
mode, the seat warmer does not turn
on automatically the next time the
engine is turned on. To turn the seat
warmer on, press the switch again.
2-19
*Some models.
English 
