2013-2016 Mazda Cx-5 SUV i-ACTIVSENSE -> High Beam Control System (HBC) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

i-ACTIVSENSE -> High Beam Control System (HBC) for Your Mazda Cx-5 SUV First Generation (2013-2016)

When Driving  
i-ACTIVSENSE  
High Beam Control System (HBC)í  
The High Beam Control System (HBC) determines the conditions in front of the vehicle  
using the Forward Sensing Camera (FSC) while driving in darkness to automatically  
switch the headlights between high and low beams.  
Refer to Warning/Indicator Lights on page 4-20.  
While driving the vehicle at a speed of about 30 km/h (18 mph), the headlights are  
switched to high beams when there are no vehicles ahead or approaching in the opposite  
direction.  
The system switches the headlights to low beams when one of the following occurs:  
l
The system detects a vehicle or the headlights/lights of a vehicle approaching in the  
opposite direction.  
l
The vehicle is driven on roads lined with streetlamps or on roads in well-lit cities and  
towns.  
l
The vehicle is driven at less than about 20 km/h (12 mph).  
The recognition distance of the  
Forward Sensing Camera (FSC)  
varies according to the  
surrounding conditions.  
Forward Sensing  
Camera (FSC)  
The warning light illuminates or flashes when the system has a malfunction.  
Refer to Warning/Indicator Lights on page 4-20.  
CAUTION  
Ø Do not adjust the vehicle height, modify the headlight units, or remove the  
camera, otherwise the system will not operate normally.  
Ø Do not rely excessively on the High Beam Control System (HBC) and drive the  
vehicle while paying sufficient attention to safety. Switch the headlights between  
the high beams and low beams manually if necessary.  
íSome models.  
4-93  
When Driving  
i-ACTIVSENSE  
NOTE  
The timing in which the system switches the headlights changes under the following conditions. If the  
system does not switch the headlights appropriately, manually switch between high and low beams  
according to the visibility as well as road and traffic conditions.  
l
When there are sources of light in the area such as street lamps, illuminated signboards, and  
traffic signals.  
l
When there are reflective objects in the surrounding area such as reflective plates and signs.  
l
When visibility is reduced under rain, snow and foggy conditions.  
l
When driving on roads with sharp curves or hilly terrain.  
l
When the headlights/rear lamps of vehicles in front of you or in the opposite lane are dim or not  
illuminated.  
l
When there is insufficient darkness such as at dawn or dusk.  
l
When the luggage compartment is loaded with heavy objects or the rear passenger seats are  
occupied.  
l
When visibility is reduced due to a vehicle in front of you spraying water from its tires onto your  
windshield.  
4-94  
When Driving  
i-ACTIVSENSE  
qTo Operate the System  
qManual Switching  
The High Beam Control System (HBC)  
operates to switch the headlights  
Switching to low beams  
Shift the lever to the low beam position.  
The High Beam Control System (HBC)  
indicator light (Green) turns off.  
automatically between high and low  
beams after the ignition is switched ON  
and the headlight switch is in the AUTO  
and high beam position. At the same time,  
the High Beam Control System (HBC)  
indicator light (green) in the instrument  
cluster illuminates.  
Switching to high beams  
Turn the headlight switch to the  
position.  
The High Beam Control System (HBC)  
indicator light (Green) turns off and the  
is illuminated.  
The High Beam Control System (HBC)  
determines that it is dark based on the  
brightness of the surrounding area.  
NOTE  
l
When the vehicle speed is 30 km/h (18 mph)  
or higher, the headlights automatically  
switch to high beams when there are no  
vehicles ahead or approaching in the  
opposite direction.  
When the vehicle speed is less than about  
20 km/h (12 mph), the High Beam Control  
System (HBC) switches the headlights to  
low beams.  
l
The low beams may not switch to high  
beams when cornering.  
l
Operation of the High Beam Control  
System (HBC) function can be disabled  
Refer to Personalization Features on page  
9-10.  
4-95  

Related Topics

Popular Owner Manuals