2013-2016 Mazda Cx-5 SUV Instrument Cluster and Display User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instrument Cluster and Display for Your Mazda Cx-5 SUV First Generation (2013-2016)

When Driving  
Instrument Cluster and Display  
Meters and Gauges  
Type A  
Type B  
Speedometer ....................................................................................................... page 4-11  
Odometer, Trip Meter and Trip Meter Selector .................................................. page 4-11  
Tachometer ........................................................................................................ page 4-12  
Fuel Gauge ........................................................................................................ page 4-13  
Dashboard Illumination ..................................................................................... page 4-14  
Outside Temperature Display ............................................................................. page 4-14  
Cruise Control Set Vehicle Speed Display (Type A instrument cluster) ............ page 4-15  
Maintenance Monitor (Type A instrument cluster) ............................................ page 4-15  
Trip Computer and INFO Switch ...................................................................... page 4-16  
4-10  
When Driving  
Instrument Cluster and Display  
Type B  
qSpeedometer  
The speedometer indicates the speed of  
the vehicle.  
qOdometer, Trip Meter and Trip  
Meter Selector  
Trip meter A  
Odometer  
The display mode can be changed  
between trip meter A and trip meter B by  
pressing the selector while one of them is  
displayed. The selected mode will be  
displayed.  
Press the selector  
Type A  
Trip meter B  
Odometer  
Trip meter A  
Odometer  
Press the selector  
NOTE  
Press the selector  
When the ignition is switched to ACC or OFF,  
the odometer or trip meters cannot be  
displayed, however, pressing the selector can  
inadvertently switch the trip meters or reset  
them during an approximate ten-minute period  
in the following cases:  
Trip meter B  
Odometer  
l
After the ignition is switched to OFF from  
ON.  
Press the selector  
l
After the driver's door is opened.  
Odometer  
The odometer records the total distance  
the vehicle has been driven.  
Trip meter  
The trip meter can record the total  
distance of two trips. One is recorded in  
trip meter A, and the other is recorded in  
trip meter B.  
4-11  
When Driving  
Instrument Cluster and Display  
For instance, trip meter A can record the  
distance from the point of origin, and trip  
meter B can record the distance from  
where the fuel tank is filled.  
qTachometer  
The tachometer shows engine speed in  
thousands of revolutions per minute  
(rpm).  
When trip meter A is selected, pressing  
the selector again within one second will  
change to trip meter B mode.  
CAUTION  
Do not run the engine with the  
tachometer needle in the RED ZONE.  
This may cause severe engine  
damage.  
When trip meter A is selected, TRIP A  
will be displayed. When trip meter B is  
selected, TRIP B will be displayed.  
The trip meter records the total distance  
the vehicle is driven until the meter is  
again reset. Return it to “0.0” by holding  
the selector depressed for 1 second or  
more. Use this meter to measure trip  
distances and to compute fuel  
*1 Striped zone  
*1 Red zone  
consumption.  
*1 The range varies depending on the type  
of gauge.  
NOTE  
l
(Vehicles with type B audio)  
If the fuel economy data is reset using the  
fuel economy monitor, or trip A is reset  
using the trip meter when the function  
which synchronizes the fuel economy  
monitor and the trip meter is on, the fuel  
economy data and trip A are reset  
simultaneously.  
NOTE  
When the tachometer needle enters the  
STRIPED ZONE, this indicates to the driver  
that the gears should be shifted before entering  
the RED ZONE.  
Refer to Fuel Economy Monitor on page  
4-84.  
l
Only the trip meters record tenths of  
kilometers (miles).  
l
The trip record will be erased when:  
l
The power supply is interrupted (blown  
fuse or the battery is disconnected).  
The vehicle is driven over 9999.9 km  
l
(mile).  
4-12  
When Driving  
Instrument Cluster and Display  
Type B  
qFuel Gauge  
The fuel gauge shows approximately how  
much fuel is remaining in the tank when  
the ignition is switched ON. We  
recommend keeping the tank over 1/4 full.  
Type A  
Full  
Full  
1/4 Full  
Empty  
1/4 Full  
Empty  
If the low fuel warning light illuminates or  
the fuel level is very low, refuel as soon as  
possible.  
Refer to Warning/Indicator Lights on page  
4-20.  
NOTE  
l
After refueling, it may require some time for  
the indicator to stabilize. In addition, the  
indicator may deviate while driving on a  
slope or curve since the fuel moves in the  
tank.  
l
The display indicating a quarter or less  
remaining fuel has more segments to show  
the remaining fuel level in greater detail.  
l
The direction of the arrow (  
) indicates  
that the fuel-filler lid is on the left side of  
the vehicle.  
4-13  
When Driving  
Instrument Cluster and Display  
NOTE  
qDashboard Illumination  
l
This symbol (  
adjust the brightness of the dashboard  
illumination.  
) indicates the knob to  
Rotate the knob to adjust the brightness of  
the instrument cluster and other  
illuminations in the dashboard.  
l
If the dashboard illumination knob is kept  
at the illumination dimmer cancel position,  
the instrument cluster will not dim when the  
NOTE  
l
The brightness of dashboard illuminations  
headlight switch is turned to the  
or  
can be adjusted when the headlights and  
Parking lights are turned on.  
When the dashboard illumination  
brightness cannot be adjusted any more, a  
beep sound will be heard.  
position again. Rotate the dashboard  
illumination knob counterclockwise to  
activate the illumination dimmer.  
l
qOutside Temperature Display  
Dim  
When the ignition is switched ON, the  
outside temperature is displayed.  
Type A  
Bright  
Type B  
Canceling the illumination dimmer  
When the headlight switch is in the  
or  
position, the illumination of the  
NOTE  
instrument cluster dims.  
Under the following conditions, the outside  
temperature display may differ from the actual  
outside temperature depending on the  
surroundings and vehicle conditions:  
When driving on snowy or foggy roads,  
or in other situations when the instrument  
cluster's visibility is reduced due to glare  
from surrounding brightness, cancel the  
illumination dimmer and increase the  
illumination intensity.  
l
Significantly cold or hot temperatures.  
l
Sudden changes in outside temperature.  
l
The vehicle is parked.  
l
The vehicle is driven at low speeds.  
To cancel the illumination dimmer, rotate  
the knob clockwise fully. You will hear a  
beep sound and the illumination dimmer  
will be canceled.  
4-14  
When Driving  
Instrument Cluster and Display  
l
(Vehicles with type A audio)  
Tire Rotation  
Oil Change  
l
The outside temperature unit can be  
switched between Celsius and Fahrenheit  
using the following procedure.  
For the setting method and indications for  
the maintenance monitor, refer to the  
Maintenance Monitor.  
Refer to Maintenance Monitor on page  
6-20.  
The maintenance monitor displays the  
information when the ignition is switched  
ON.  
1. Press the INFO button with the ignition  
switched off and continue pressing the  
INFO button for 5 seconds or longer  
while switching the ignition ON. The  
outside temperature display flashes.  
2. Press the up  
or down  
part of the  
NOTE  
INFO switch to change the outside  
temperature unit.  
This function is inoperable while the vehicle is  
being driven.  
3. Press and hold the INFO button for 3  
seconds or longer while the outside  
temperature display is flashing. The  
outside temperature display  
illuminates.  
Message display  
When the remaining time or the distance  
approaches 0, a message is displayed each  
time the ignition is switched ON.  
q
Cruise Control Set Vehicle Speed  
Display (Type A instrument cluster)  
The vehicle speed preset using the cruise  
control is displayed.  
qMaintenance Monitor (Type A  
instrument cluster)  
The following maintenance period  
notifications can be displayed by turning  
the Maintenance Monitor on.  
l
Scheduled Maintenance  
4-15  
When Driving  
Instrument Cluster and Display  
NOTE  
Distance-to-empty mode  
l
If any of the INFO switches (up  
, down  
This mode displays the approximate  
distance you can travel on the remaining  
fuel based on the fuel economy.  
, or INFO button) is pressed while a  
message is displayed, it will no longer be  
displayed the next time the ignition is  
switched ON.  
The distance-to-empty will be calculated  
and displayed every second.  
l
After the vehicle is serviced and the  
remaining time/distance is reset, the  
message for the next maintenance period  
will be displayed when the remaining  
distance or time to the next maintenance  
period approaches 0 (displays when engine  
is started).  
Type A  
l
l
If there are multiple messages, they are  
displayed according to their order.  
If OFF is set for Messages, messages are  
not displayed.  
qTrip Computer and INFO Switch  
Type B  
The following information can be selected  
by pressing the up  
or down  
part of  
the INFO switch with the ignition  
switched ON.  
l
Approximate distance you can travel  
on the available fuel  
l
l
l
l
Average fuel economy  
Current fuel economy  
Average vehicle speed  
Lane departure warning system  
(LDWS) display (Type A instrument  
cluster)í  
l
l
Mazda Radar Cruise Control (MRCC)  
display (Type A instrument cluster)í  
Distance Recognition Support System  
(DRSS) display (Type A instrument  
cluster)í  
l
Warning (Type A instrument cluster)  
If you have any problems with your trip  
computer, consult an Authorized Mazda  
Dealer.  
4-16  
íSome models.  
When Driving  
Instrument Cluster and Display  
NOTE  
Average fuel economy mode  
l
Even though the distance-to-empty display  
This mode displays the average fuel  
economy by calculating the total fuel  
consumption and the total traveled  
distance since purchasing the vehicle, re-  
connecting the battery after disconnection,  
or resetting the data. The average fuel  
economy is calculated and displayed  
every minute.  
may indicate a sufficient amount of  
remaining driving distance before refueling  
is required, refuel as soon as possible if the  
fuel level is very low or the low fuel  
warning light illuminates.  
The display will not change unless you add  
more than approximately 10 L (2.6 US gal,  
2.2 Imp gal) of fuel.  
The distance-to-empty is the approximate  
remaining distance the vehicle can be  
driven until all the graduation marks in the  
fuel gauge indicating the remaining fuel  
supply disappear.  
l
l
Type A  
l
If there is no past fuel economy information  
such as after first purchasing your vehicle  
or the information is deleted when the  
battery cables are disconnected, the actual  
distance-to empty/range may differ from the  
amount indicated.  
Type B  
To clear the data being displayed, press  
the INFO button for more than 1.5  
seconds.  
After pressing the INFO button, - - - L/  
100 km (- - - mpg) will be displayed for  
about 1 minute before the fuel economy is  
recalculated and displayed.  
Current fuel economy mode  
This mode displays the current fuel  
economy by calculating the amount of  
fuel consumption and the distance  
traveled.  
4-17  
When Driving  
Instrument Cluster and Display  
Current fuel economy will be calculated  
and displayed every 2 seconds.  
Average vehicle speed will be calculated  
and displayed every 10 seconds.  
Type A  
Type A  
Type B  
Type B  
When you've slowed to about 5 km/h (3  
mph), - - - L/100 km (- - - mpg) will be  
displayed.  
To clear the data being displayed, press  
the INFO button for more than 1.5  
seconds. After pressing the INFO button,  
- - - km/h (- - - mph) will be displayed for  
about 1 minute before the vehicle speed is  
recalculated and displayed.  
Average vehicle speed mode  
This mode displays the average vehicle  
speed by calculating the distance and the  
time traveled since connecting the battery  
or resetting the data.  
Lane Departure Warning System  
(LDWS) display (Type A instrument  
cluster)í  
Information regarding the Lane Departure  
Warning System (LDWS) is displayed.  
4-18  
íSome models.  
When Driving  
Instrument Cluster and Display  
Refer to Lane Departure Warning System  
(LDWS) on page 4-96.  
Refer to Distance Recognition Support  
System (DRSS) on page 4-108.  
Mazda Radar Cruise Control (MRCC)  
display (Type A instrument cluster)í  
Warning (Display Indication) (Type A  
instrument cluster)  
Information regarding the Mazda Radar  
Cruise Control (MRCC) is displayed.  
Refer to Mazda Radar Cruise Control  
(MRCC) on page 4-116.  
A message is displayed to notify the user  
of the system operation status and  
malfunctions or abnormalities.  
Check the indicated message.  
Distance Recognition Support System  
(DRSS) display (Type A instrument  
cluster)í  
Information regarding the Distance  
Recognition Support System (DRSS) is  
displayed.  
íSome models.  
4-19  
When Driving  
Instrument Cluster and Display  
Warning/Indicator Lights  
qType A  
Warning/Indicator lights will appear in any of the highlighted areas  
(Display example)  
Displays as follows:  
Master  
warning  
light  
Indication in display and master warning light in instrument cluster are illuminated  
at same time  
This indicates a malfunction with the vehicle system. Check the message indicated in the  
display and consult an Authorized Mazda Dealer. For details, refer to the explanations for  
the warning/indicator lights, in the warning/indicator lights section, which match the  
symbol in the upper part of the display. If a message is not indicated in the display, operate  
the INFO switch to display the “Warning” screen.  
Multi-information display  
A message such as the system operation status, a malfunction, or an abnormality is  
indicated.  
l
(When a symbol and message are indicated in the display)  
For details on the symbols indicated in the upper part of the screen, check the indication  
and method for taking action list.  
4-20  
When Driving  
Instrument Cluster and Display  
l
(When only a message is indicated in the display)  
Follow the instructions indicated in the display.  
If any of the content in the following illustrations is indicated, there may be a problem with  
the vehicle. The method for taking action differs depending on the indication.  
Check the following illustrations below.  
Action: Park the vehicle immediately, view the symbol indicated in the upper part of  
the screen and then refer to the “Indication and method for taking action list”  
containing the symbol to see what action should be taken.  
Indication on display  
Action: Consult an Authorized Mazda Dealer to have your vehicle inspected. View the  
symbol indicated in the upper part of the screen and refer to the “Indication and  
method for taking action list” containing the symbol to see what action should be  
taken.  
Indication on display  
Action: Consult an Authorized Mazda Dealer to have your vehicle inspected.  
Indication on display  
4-21  
When Driving  
Instrument Cluster and Display  
Indication and method for taking action list  
Signal  
Warning/Indicator Lights  
Page  
Master Warning Light  
Brake System Warning Light  
ABS Warning Light  
4-27  
4-27  
4-28  
Electric Parking Brake Warning Light  
4-29  
Charging System Warning Indication/Warning Light  
Engine Oil Warning Light  
4-29  
4-30  
4-30  
4-31  
Check Engine Light  
High Engine Coolant Temperature Warning Light (Red)  
Lane Departure Warning System (LDWS) Indication  
4-31  
Lane Departure Warning System (LDWS) OFF Indication  
AWD Warning Indication  
4-32  
4-32  
4-33  
4-33  
4-34  
4-35  
Automatic Transaxle Warning Indication  
Power Steering Malfunction Indication  
Air Bag/Front Seat Belt Pretensioner System Warning Light  
Low Fuel Warning Light  
4-22  
When Driving  
Instrument Cluster and Display  
Signal  
Warning/Indicator Lights  
Page  
Check Fuel Cap Warning Indication  
Seat Belt Warning Light  
4-35  
4-35  
4-36  
Door-Ajar Warning Indication  
Liftgate-Ajar Warning Indication  
4-37  
Low Washer Fluid Level Warning Indication  
Tire Pressure Monitoring System Warning Light  
KEY Warning Indication  
4-37  
4-37  
4-39  
4-41  
4-41  
4-41  
4-42  
High Beam Control System (HBC) Warning Light (Amber)/Indicator Light  
(Green)  
Wrench Indication  
TCS/DSC Indicator Light  
TCS OFF Indicator Light  
Smart Brake Support/Smart City Brake Support (SBS/SCBS) OFF Indicator  
Light  
4-42  
Smart City Brake Support (SCBS) Warning Indication  
Low Engine Coolant Temperature Indicator Light (Blue)  
4-42  
4-42  
4-23  
When Driving  
Instrument Cluster and Display  
Signal  
Warning/Indicator Lights  
Page  
Shift Position Indication  
4-43  
Headlight High-Beam Indicator Light  
Turn Signal/Hazard Warning Indicator Lights  
Security Indicator Light  
4-43  
4-43  
4-44  
4-44  
4-44  
4-43  
Mazda Radar Cruise Control (MRCC) Warning Light (Amber)/Indicator  
Light (Green)  
Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green)  
Select Mode Indication  
Blind Spot Monitoring (BSM) OFF Indication  
4-45  
Lights-On Indicator Light  
4-45  
4-46  
LED Headlight Warning Light  
qType B  
Warning/Indicator lights will appear in any of the highlighted areas  
4-24  
When Driving  
Instrument Cluster and Display  
Signal  
Warning/Indicator Lights  
Page  
Master Warning Light  
Brake System Warning Light  
ABS Warning Light  
4-27  
4-27  
4-28  
Electric Parking Brake Warning Light  
4-29  
Brake Pedal Operation demand Indicator Light  
Charging System Warning Light  
4-29  
4-29  
4-30  
4-30  
4-31  
Engine Oil Warning Light  
Check Engine Light  
High Engine Coolant Temperature Warning Light (Red)  
Lane Departure Warning System (LDWS) Warning Light  
4-31  
Lane Departure Warning System (LDWS) OFF Indicator Light  
AWD Warning Light  
4-32  
4-32  
4-33  
4-33  
4-34  
4-35  
Automatic Transaxle Warning Light  
Power Steering Malfunction Indicator Light  
Air Bag/Front Seat Belt Pretensioner System Warning Light  
Low Fuel Warning Light  
4-25  
When Driving  
Instrument Cluster and Display  
Signal  
Warning/Indicator Lights  
Page  
Check Fuel Cap Warning Light  
Seat Belt Warning Light  
4-35  
4-35  
4-36  
Door-Ajar Warning Light  
Low Washer Fluid Level Warning Light  
4-37  
4-37  
Tire Pressure Monitoring System Warning Light  
KEY Warning Light (Red)/Indicator Light (Green)  
4-39  
4-41  
4-41  
4-41  
4-42  
4-42  
4-43  
4-43  
4-43  
4-44  
4-44  
High Beam Control System (HBC) Warning Light (Amber)/Indicator Light  
(Green)  
Wrench Indicator Light  
TCS/DSC Indicator Light  
TCS OFF Indicator Light  
Low Engine Coolant Temperature Indicator Light (Blue)  
Shift Position Indication  
Headlight High-Beam Indicator Light  
Turn Signal/Hazard Warning Indicator Lights  
Security Indicator Light  
Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green)  
4-26  
When Driving  
Instrument Cluster and Display  
Signal  
Warning/Indicator Lights  
Page  
Select Mode Indication  
4-43  
Blind Spot Monitoring (BSM) OFF Indicator Light  
4-45  
Lights-On Indicator Light  
4-45  
4-46  
LED Headlight Warning Light  
qMaster Warning Light  
qBrake System Warning Light  
This warning light stays on for a few  
seconds when the ignition is switched  
ON.  
This warning light stays on for a few  
seconds when the ignition is switched  
ON.  
This warning has the following functions:  
Type A  
Parking brake warning/Warning light  
inspection  
Displays when notification of the system  
malfunctions is required.  
Check the message indicated in the  
display and consult an Authorized Mazda  
Dealer.  
The light illuminates when the electric  
parking brake is applied with the ignition  
switched to START or ON. It turns off  
when the electric parking brake is  
released.  
Type B  
The light illuminates continuously if any  
one of the following occurs. Consult an  
Authorized Mazda Dealer.  
When the light turns on  
If the brake system warning light remains  
turned on even though the electric parking  
brake is released, the brake fluid may be  
low or there could be a problem with the  
brake system. Park the vehicle in a safe  
place immediately and contact an  
l
There is a malfunction in the battery  
management system.  
There is a malfunction in the brake  
l
switch.  
Authorized Mazda Dealer.  
4-27  
When Driving  
Instrument Cluster and Display  
When the light is flashing  
If the ABS warning light stays on while  
you're driving, the ABS control unit has  
detected a system malfunction. If this  
occurs, your brakes will function normally  
as if the vehicle had no ABS.  
The light flashes if the electric parking  
brake has a malfunction.  
If the light remains flashing even if the  
electric parking brake switch is operated,  
consult an Authorized Mazda Dealer as  
soon as possible.  
Should this happen, consult an Authorized  
Mazda Dealer as soon as possible.  
NOTE  
WARNING  
l
When the engine is jump-started to charge  
the battery, uneven rpm occurs and the ABS  
warning light may illuminate. If this occurs,  
it is the result of the weak battery and does  
not indicate an ABS malfunction.  
Recharge the battery.  
The brake assist system does not operate  
Do not drive with the brake system  
warning light illuminated. Contact an  
Authorized Mazda Dealer to have the  
brakes inspected as soon as possible:  
Driving with the brake system  
l
warning light illuminated is  
while the ABS warning light is illuminated.  
dangerous. It indicates that your  
brakes may not work at all or that  
they could completely fail at any  
time. If this light remains  
illuminated, after checking that the  
parking brake is fully released, have  
the brakes inspected immediately.  
qElectronic Brake Force  
Distribution System Warning  
CAUTION  
In addition, the effectiveness of the  
braking may diminish so you may  
need to depress the brake pedal more  
strongly than normal to stop the  
vehicle.  
If the electronic brake force distribution  
control unit determines that some  
components are operating incorrectly, the  
control unit may illuminate the brake  
system warning light and the ABS  
warning light simultaneously. The  
problem is likely to be the electronic  
brake force distribution system.  
qABS Warning Light  
The warning light stays on for a few  
seconds when the ignition is switched  
ON.  
4-28  
When Driving  
Instrument Cluster and Display  
qBrake Pedal Operation Demand  
WARNING  
Indicator Light (Type B)  
Do not drive with both the ABS warning  
light and brake warning light  
illuminated. Have the vehicle towed to  
an Authorized Mazda Dealer to have  
the brakes inspected as soon as  
possible:  
Driving when the brake system  
warning light and ABS warning light  
are illuminated simultaneously is  
dangerous.  
When both lights are illuminated, the  
rear wheels could lock more quickly  
in an emergency stop than under  
normal circumstances.  
This indicator light stays on for a few  
seconds when the ignition is switched  
ON.  
The light turns on when the electric  
parking brake is released using the electric  
parking brake switch without depressing  
the brake pedal.  
qElectric Parking Brake Warning  
Light  
qCharging System Warning  
Indication/Warning Light  
This warning light stays on for a few  
seconds when the ignition is switched  
ON.  
This warning light illuminates when the  
ignition is switched ON and turns off  
when the engine is started.  
The warning light illuminates when the  
system has a malfunction. Have your  
vehicle inspected at an Authorized Mazda  
Dealer.  
If the warning light/indication illuminates  
while driving, it indicates a malfunction  
of the alternator or of the charging system.  
Drive to the side of the road and park off  
the right-of-way. Consult an Authorized  
Mazda Dealer.  
4-29  
When Driving  
Instrument Cluster and Display  
CAUTION  
CAUTION  
Do not run the engine if the oil level  
is low. Otherwise, it could result in  
extensive engine damage.  
Do not continue driving when the  
charging system warning light is  
illuminated because the engine could  
stop unexpectedly.  
4. Start the engine and check the warning  
light.  
qEngine Oil Warning Indication/  
Warning Light  
If the light remains illuminated even  
though the oil level is normal or after  
adding oil, stop the engine immediately  
and have your vehicle towed to an  
Authorized Mazda Dealer.  
qCheck Engine Light  
The warning light stays on for a few  
seconds when the ignition is switched  
ON.  
This warning light indicates low engine  
oil pressure.  
This indicator light illuminates when the  
ignition is switched ON and turns off  
when the engine is started.  
CAUTION  
Do not run the engine if the oil  
pressure is low. Otherwise, it could  
result in extensive engine damage.  
If this light illuminates while driving, the  
vehicle may have a problem. It is  
important to note the driving conditions  
when the light illuminated and consult an  
Authorized Mazda Dealer.  
If the light illuminates while driving:  
1. Drive to the side of the road and park  
off the right-of-way on level ground.  
The check engine light may illuminate in  
the following cases:  
2. Turn off the engine and wait 5 minutes  
for the oil to drain back into the oil  
pan.  
l
The fuel tank level being very low or  
approaching empty.  
The engine's electrical system has a  
problem.  
The emission control system has a  
problem.  
(U.S.A. and Canada)  
3. Inspect the engine oil level (page 6-30).  
If it's low, add the appropriate amount  
of engine oil while being careful not to  
overfill.  
l
l
l
The fuel-filler cap is missing or not  
tightened securely.  
4-30  
When Driving  
Instrument Cluster and Display  
If the check engine light remains on, do  
not drive at high speeds and consult an  
Authorized Mazda Dealer as soon as  
possible.  
qLane Departure Warning System  
(LDWS) Indication (Type A)í  
q
High Engine Coolant Temperature  
Warning Light (Red)  
When the Lane Departure Warning  
System (LDWS) is turned on the LDWS  
indication is displayed.  
q
Lane Departure Warning System  
(LDWS) Warning Light (Type B)í  
When the ignition is switched ON, the  
light illuminates momentarily and then  
turns off.  
The light flashes when the engine coolant  
temperature is extremely high, and  
illuminates when the engine coolant  
temperature increases further.  
Handling Procedure  
Flashing light  
This warning light illuminates for a few  
seconds when the ignition is switched  
ON.  
The indicator flashes when the system  
determines that the vehicle may be  
deviating from its lane.  
Drive slowly to reduce engine load until  
you can find a safe place to stop the  
vehicle and wait for the engine to cool  
down.  
Illuminated light  
This indicates the possibility of  
overheating. Park the vehicle in a safe  
place immediately and stop the engine.  
Refer to Overheating (page 7-18).  
CAUTION  
Do not drive the vehicle with the high  
engine coolant temperature warning  
light illuminated. Otherwise, it could  
result in damage to the engine.  
íSome models.  
4-31  
When Driving  
Instrument Cluster and Display  
qLane Departure Warning System  
(LDWS) OFF Indication/  
Indicator Lightí  
CAUTION  
Ø Always use tires for all wheels that  
are of the specified size, and the  
same manufacture, brand, and  
tread pattern. In addition, do not  
use tires with significantly  
different wear patterns on the  
same vehicle. If such improper  
tires are used, the LDWS may not  
operate normally.  
Type A  
Ø When an emergency spare tire is  
used, the system may not operate  
normally.  
Press the LDWS switch to cancel the  
LDWS. The LDWS OFF indication is  
displayed.  
If the indication remains displayed even  
though the LDWS switch has been  
operated, it indicates a problem in the  
system. Have your vehicle inspected at an  
Authorized Mazda Dealer.  
qAWD Warning Indication/  
Warning Lightí  
Type B  
This indicator light illuminates for a few  
seconds when the ignition is switched  
ON.  
Type A  
A problem in the system may be indicated  
under the following conditions. Have your  
vehicle inspected at an Authorized Mazda  
Dealer.  
The warning indication will display under  
the following conditions;  
l
There is an abnormality with the AWD  
system.  
There is too much difference in tire  
radius between the front and rear  
wheels.  
l
The light does not turn on when the  
ignition is switched ON.  
It remains illuminated even though the  
l
l
LDWS switch has been switched off.  
l
l
The differential oil temperature is  
abnormally high.  
There is a continuous large difference  
between front and rear wheel rotation,  
such as when trying to pull away from  
an icy surface or when trying to  
remove the vehicle from mud, sand or  
similar conditions.  
4-32  
íSome models.  
When Driving  
Instrument Cluster and Display  
When “ 4WD system malfunction ” is  
indicated  
qAutomatic Transaxle Warning  
Indication/Warning Light  
Contact an Authorized Mazda Dealer.  
When “ 4WD system high-load” is  
indicated  
Park the vehicle in a safe place. After a  
few moments, if the indication disappears,  
you can resume driving. If the indication  
does not disappear, contact an Authorized  
Mazda Dealer.  
Type B  
This warning light stays on for a few  
seconds when the ignition is switched  
ON.  
Type B  
This warning light stays on for a few  
seconds when the ignition is switched  
ON.  
Type A/Type B  
The light/indication illuminates when the  
transaxle has a problem.  
The warning light will illuminate or flash  
under the following conditions:  
l
Illuminates when there is an  
CAUTION  
abnormality with the AWD system.  
Illuminates if there is too much  
If the automatic transaxle warning  
light/warning indication illuminates,  
the transaxle has an electrical  
problem. Continuing to drive your  
Mazda in this condition could cause  
damage to your transaxle. Consult  
an Authorized Mazda Dealer as soon  
as possible.  
l
difference in tire radius between the  
front and rear wheels.  
Flashes when the differential oil  
l
temperature is abnormally high.  
Flashes when there is a continuous  
l
large difference between front and rear  
wheel rotation, such as when trying to  
pull away from an icy surface or when  
trying to remove the vehicle from mud,  
sand or similar conditions.  
q
Power Steering Malfunction  
Warning Indication/Indicator Light  
When illuminated  
If the AWD warning light illuminates,  
contact an Authorized Mazda Dealer.  
When flashing  
Park the vehicle in a safe place. After a  
few moments, if the warning light stops  
flashing, you can resume driving. If the  
light does not stop flashing, contact an  
Authorized Mazda Dealer.  
Type B  
This indicator light illuminates when the  
ignition is switched ON, and turns off  
when the engine is started.  
4-33  
When Driving  
Instrument Cluster and Display  
Type A/Type B  
q
Air Bag/Front Seat Belt  
Pretensioner System Warning Light  
The power steering malfunction indicator  
light/warning indication illuminates or  
flashes if there is a malfunction with the  
power steering while the engine is  
running.  
If the indicator light/warning indication  
illuminates or flashes, park the vehicle in  
a safe place immediately and stop the  
engine.  
If the indicator light/warning indication  
does not turn off even if the engine is  
restarted afterwards, consult an  
Authorized Mazda Dealer.  
If the air bag/front seat belt pretensioner  
system is working properly, the warning  
light illuminates when the ignition is  
switched ON or after the engine is  
cranked. The warning light turns off after  
a specified period of time.  
NOTE  
l
If the indicator light/warning indication  
A system malfunction is indicated if the  
warning light constantly flashes,  
constantly illuminates or does not  
illuminate at all when the ignition is  
switched ON. If any of these occur,  
consult an Authorized Mazda Dealer as  
soon as possible. The system may not  
operate in an accident.  
illuminates or flashes, the power steering  
will not operate normally. If this happens,  
the steering wheel can still be operated,  
however, the operation may feel heavy  
compared to normal, and the steering  
wheel could vibrate when turning.  
l
Repeatedly jerking the steering wheel left  
and right while the vehicle is stopped or  
moving extremely slowly will cause the  
power steering system to go into protective  
mode which will make the steering feel  
heavy, but this does not indicate a problem.  
If this occurs, park the vehicle safely and  
wait several minutes for the system to  
return to normal.  
WARNING  
Never tamper with the air bag/  
pretensioner systems and always have  
an Authorized Mazda Dealer perform  
all servicing and repairs:  
Self-servicing or tampering with the  
systems is dangerous. An air bag/  
pretensioner could accidentally  
activate or become disabled causing  
serious injury or death.  
4-34  
When Driving  
Instrument Cluster and Display  
qLow Fuel Warning Light  
qSeat Belt Warning Light  
Driver's seat  
This warning light signals that the fuel  
tank will soon be empty.  
Refuel as soon as possible.  
Front passenger's seat  
Climate control  
Fully Automatic  
qCheck Fuel Cap Warning  
Type  
Indication/Indicator Lightí  
Manual Type  
Type B  
Except Mexico  
This warning light illuminates for a few  
seconds when the ignition is switched  
ON.  
The seat belt warning light turns on if the  
driver or front passenger's seat is occupied  
and the seat belt is not fastened with the  
ignition switched ON.  
Type A/Type B  
If the driver or front passenger's seat belt  
is unfastened (only when the front  
passenger's seat is occupied) and the  
vehicle is driven at a speed faster than  
about 20 km/h (12 mph), the warning  
light flashes. After a short time, the  
warning light stops flashing, but remains  
illuminated.  
If the check fuel cap warning light  
illuminates/indication while driving, the  
fuel-filler cap may not be installed  
properly. Stop the engine and reinstall the  
fuel-filler cap.  
Refer to Fuel-Filler Cap on page 3-26.  
íSome models.  
4-35  
When Driving  
Instrument Cluster and Display  
NOTE  
NOTE  
l
l
The warning light flashes for about 6  
Placing heavy items on the front  
seconds if the driver's seat belt is not  
fastened when the ignition is switched ON.  
To allow the front passenger occupant  
passenger's seat may cause the front  
passenger's seat belt warning function to  
operate depending on the weight of the  
item.  
To allow the front passenger seat weight  
sensor to function properly, do not place  
and sit on an additional seat cushion on the  
front passenger's seat. The sensor may not  
function properly because the additional  
seat cushion could cause sensor  
interference.  
l
classification sensor to function properly,  
do not place and sit on an additional seat  
cushion on the front passenger's seat. The  
sensor may not function properly because  
the additional seat cushion could cause  
sensor interference.  
If a small child is seated on the front  
passenger's seat, the warning light may not  
operate.  
l
l
l
If a small child is seated on the front  
passenger's seat, the warning light may not  
operate.  
Mexico  
The seat belt warning light turns on if the  
driver or front passenger's seat is occupied  
and the seat belt is not fastened with the  
ignition switched ON.  
qDoor-Ajar Warning Indication/  
Warning Light  
Type A  
If the driver or front passenger's seat belt  
is unfastened (only when the front  
passenger's seat is occupied) and the  
vehicle is driven at a speed faster than  
about 20 km/h (12 mph), the warning  
light flashes. After a short time, the  
warning light stops flashing, but remains  
illuminated. If a seat belt remains  
unfastened, the warning light flashes  
again for a given period of time.  
Type B  
Type A  
This warning indication illuminates when  
any door is not securely closed.  
Close the door securely before driving the  
vehicle.  
4-36  
When Driving  
Instrument Cluster and Display  
Type B  
qTire Pressure Monitoring System  
Warning Light  
This warning light illuminates when any  
door or the liftgate is not securely closed.  
Close the door or the liftgate securely  
before driving the vehicle.  
qLiftgate-Ajar Warning Indication  
(Type A instrument cluster)í  
This warning light illuminates for a few  
seconds when the ignition is switched  
ON.  
The warning light illuminates and a beep  
is heard when tire pressure is too low in  
one or more tires, and flashes when there  
is a system malfunction.  
This warning indication is illuminated  
when the liftgate is not securely closed.  
Close the liftgate securely before driving  
the vehicle.  
q
Low Washer Fluid Level Warning  
Indication/Warning Lightí  
Type A/Type B  
This warning light/warning indication  
indicates that little washer fluid remains.  
Add fluid (page 6-33).  
íSome models.  
4-37  
When Driving  
Instrument Cluster and Display  
Adjust the tire pressure to the correct tire  
pressure and initialize TPMS. Refer to the  
specification charts (page 9-8).  
WARNING  
If the tire pressure monitoring system  
warning light illuminates or flashes, or  
the tire pressure warning beep sound is  
heard, decrease vehicle speed  
NOTE  
l
Perform tire pressure adjustment when the  
tires are cold. Tire pressure will vary  
according to the tire temperature, therefore  
let the vehicle stand for 1 hour or only drive  
it 1.6 km (1 mile) or less before adjusting  
the tire pressures. When pressure is  
adjusted on hot tires to the cold inflation  
pressure, the TPMS warning light/beep may  
turn on after the tires cool and pressure  
drops below specification.  
Also, an illuminated TPMS warning light,  
resulting from the tire air pressure dropping  
due to cold ambient temperature will  
remain illuminated even if the ambient  
temperature rises. In this case, it will also  
be necessary to adjust the tire air pressures.  
If the TPMS warning light illuminates due  
to a drop in tire air pressure, make sure to  
check and adjust the tire air pressures.  
immediately and avoid sudden  
maneuvering and braking:  
If the tire pressure monitoring system  
warning light illuminates or flashes,  
or the tire pressure warning beep  
sound is heard, it is dangerous to  
drive the vehicle at high speeds, or  
perform sudden maneuvering or  
braking. Vehicle drivability could  
worsen and result in an accident.  
To determine if you have a slow leak  
or a flat, pull over to a safe position  
where you can check the visual  
condition of the tire and determine if  
you have enough air to proceed to a  
place where air may be added and  
the system monitored again by an  
Authorized Mazda Dealer or a tire  
repair station.  
l
Tires lose air naturally over time and the  
TPMS cannot tell if the tires are getting too  
soft over time or you have a flat. However,  
when you find one low tire in a set of four-  
that is an indication of trouble; you should  
have someone drive the vehicle slowly  
forward so you can inspect any low tire for  
cuts and any metal objects sticking through  
tread or sidewall. Put a few drops of water  
in the valve stem to see if it bubbles  
Do not ignore the TPMS Warning Light:  
Ignoring the TPMS warning light is  
dangerous, even if you know why it is  
illuminated. Have the problem taken  
care of as soon as possible before it  
develops into a more serious  
situation that could lead to tire  
failure and a dangerous accident.  
indicating a bad valve. Leaks need to be  
addressed by more than simply reinflating  
the tire as leaks are dangerous - take it to  
an Authorized Mazda Dealer.  
Warning light illuminates/Warning  
beep sounds  
When the warning light illuminates, and  
the warning beep sound is heard (about 3  
seconds), tire pressure is too low in one or  
more tires.  
If the warning light illuminates again even  
after the tire pressures are adjusted and the  
TPMS initialization is performed, there  
may be a tire puncture. Replace the  
punctured tire with the temporary spare  
tire (page 7-7).  
4-38  
When Driving  
Instrument Cluster and Display  
Warning light flashes  
“Ignition is on” is displayed  
If the tire pressure monitoring system has  
a malfunction, the tire pressure warning  
light flashes for about 1 minute when the  
ignition is switched ON and then  
continues illuminating. Have your vehicle  
checked by an Authorized Mazda Dealer  
as soon as possible.  
This message is displayed when the  
driver's door is opened without switching  
the ignition off.  
“Key not detected” is displayed  
This message is displayed when any of  
the following operations is performed  
with the key out of the operational range  
or placed in areas inside the cabin where it  
is difficult for the key to be detected.  
qKEY Warning Indication/  
Warning Light (Red)/KEY  
Indicator Light (Green)  
l
The push button start is pressed with  
the ignition switched off  
The ignition is switched on  
The driver's door is opened or all doors  
l
l
are closed without switching the  
ignition off  
“Key battery is weak Hold key close to  
start button” is displayed  
This message is displayed when any of  
the following operations is performed  
with the key out of the operational range  
or placed in areas inside the cabin where it  
is difficult for the key to be detected.  
Type A  
“Keyless System malfunction” is  
displayed  
This message is displayed if the advanced  
keyless entry & push button start system  
has a problem.  
l
The push button start is pressed with  
the ignition switched off  
Brake pedal (Automatic transaxle  
l
Contact an Authorized Mazda Dealer.  
vehicle)/Clutch pedal (Manual  
transaxle vehicle) is depressed with the  
ignition switched off  
CAUTION  
If the above message is indicated, or  
the push button start indicator light  
(amber) flashes, the engine may not  
start. If the engine cannot be started,  
try starting it using the emergency  
operation for starting the engine, and  
have the vehicle inspected at an  
Authorized Mazda Dealer as soon as  
possible.  
“Key battery is low Replace soon” is  
displayed  
This message is displayed when the  
remaining battery power of the key is low  
and the ignition is switched from on to  
off.  
Refer to Emergency Operation for  
Starting the Engine on page 4-8.  
4-39  
When Driving  
Instrument Cluster and Display  
l
NOTE  
Under the following conditions, the  
KEY warning light (red) will flash  
continuously when the ignition has not  
been switched off to notify the driver  
that the key has been removed from the  
vehicle. The KEY warning light (red)  
will stop flashing when the key is back  
inside the vehicle:  
Because the key utilizes low-intensity radio  
waves, the Key Removed From Vehicle  
Warning may activate if the key is carried  
together with a metal object or it is placed in a  
poor signal reception area.  
Type B  
The ignition has not been switched off  
and all the doors and the liftgate are  
closed after removing the key from the  
vehicle.  
This indicator has two colors.  
KEY Warning Light (Red)  
When illuminated  
If any malfunction occurs in the keyless  
entry system, it illuminates continuously.  
NOTE  
Because the key utilizes low-intensity radio  
waves, the Key Removed From Vehicle  
Warning may activate if the key is carried  
together with a metal object or it is placed in a  
poor signal reception area.  
CAUTION  
If the key warning indicator light  
illuminates or the push button start  
indicator light (amber) flashes, the  
engine may not start. If the engine  
cannot be started, try starting it  
using the emergency operation for  
starting the engine, and have the  
vehicle inspected at an Authorized  
Mazda Dealer as soon as possible.  
Refer to Emergency Operation for  
Starting the Engine on page 4-8.  
KEY Indicator Light (Green)  
When illuminated  
When the brake pedal is depressed with  
an automatic transaxle or the clutch pedal  
is depressed with a manual transaxle, the  
system confirms that the correct key is  
inside the vehicle, the KEY indicator light  
(green) illuminates, and the engine can be  
started (page 4-3).  
When flashing  
When flashing  
l
Under the following conditions, the  
When the ignition is switched from ON to  
off, the KEY indicator light (green)  
flashes for approximately 30 seconds  
indicating that the remaining battery  
power is low. Replace with a new battery  
before the key becomes unusable.  
Refer to Key Battery Replacement on  
page 6-40.  
KEY warning light (red) flashes to  
notify the driver that the ignition  
cannot be switched from off.  
l
The key battery is dead.  
The key is not within operational  
range.  
The key is placed in areas where it is  
difficult for the system to detect the  
signal (page 3-8).  
l
l
l
A key from another manufacturer  
similar to the key is in the  
operational range.  
4-40  
When Driving  
Instrument Cluster and Display  
Type B  
qHBC Warning Light (Amber)/  
HBC Indicator Light (Green)í  
This indicator light stays on for a few  
seconds when the ignition is switched  
ON.  
The wrench indicator light illuminates  
when the engine oil replacement period is  
reached.  
If the light is illuminated, replace the  
engine oil.  
Refer to Engine Oil on page 6-27.  
HBC warning light (Amber)  
When illuminated  
qTCS/DSC Indicator Light  
When the ignition is switched ON, this  
warning light illuminates and then turns  
off after a few seconds. The warning light  
illuminates if the area of the windshield in  
front of the forward sensing camera (FSC)  
is fogged or obstructed.  
This light turns on if there is a  
malfunction in the high beam control  
system (HBC). Have your vehicle  
inspected by an Authorized Mazda  
Dealer.  
This indicator light stays on for a few  
seconds when the ignition is switched  
ON. If the TCS or DSC is operating, the  
indicator light flashes.  
HBC indicator light (Green)  
If the light stays on, the TCS, DSC or the  
brake assist system may have a  
malfunction and they may not operate  
correctly. Take your vehicle to an  
Authorized Mazda Dealer.  
This indicator light illuminates when the  
system is operating and turns off when the  
system operation is canceled.  
q
Wrench Indication/Indicator Light  
NOTE  
l
In addition to the indicator light flashing, a  
slight lugging sound will come from the  
engine. This indicates that the TCS/DSC is  
operating properly.  
l
On slippery surfaces, such as fresh snow, it  
will be impossible to achieve high rpm  
when the TCS is on.  
Type A  
Perform maintenance in accordance with  
the message.  
íSome models.  
4-41  
When Driving  
Instrument Cluster and Display  
qTCS OFF Indicator Light  
q
Smart City Brake Support (SCBS)  
Warning Indication (Type A)í  
This indicator light stays on for a few  
seconds when the ignition is switched  
ON.  
It also illuminates when the TCS OFF  
switch is pressed and TCS is switched off.  
Refer to TCS OFF Switch on page 4-82.  
The indication is displayed in the multi  
information display during SCBS brake  
operation or brake assist (SCBS brake  
assist) operation.  
q
Low Engine Coolant Temperature  
Indicator Light (Blue)  
If the light remains illuminated and the  
TCS is not switched off, take your vehicle  
to an Authorized Mazda Dealer. The DSC  
may have a malfunction.  
qSmart Brake Support/Smart City  
Brake Support (SBS/SCBS) OFF  
Indicator Light (Type A)í  
The light illuminates continuously when  
the engine coolant temperature is low and  
turns off after the engine is warm.  
If the low engine coolant temperature  
indicator light remains illuminated after  
the engine has been sufficiently warmed  
up, the temperature sensor could have a  
malfunction. Consult an Authorized  
Mazda Dealer.  
This indicator light illuminates for a few  
seconds when the ignition is switched  
ON.  
When the Smart Brake Support/Smart  
City Brake Support (SBS/SCBS) system  
is turned off, the Smart Brake Support/  
Smart City Brake Support (SBS/SCBS)  
OFF indicator light turns on.  
Refer to Personalization Features on page  
9-10.  
4-42  
íSome models.  
When Driving  
Instrument Cluster and Display  
qShift Position Indication  
qHeadlight High-Beam Indicator  
Light  
The selector position is indicated when  
the ignition is switched ON.  
This light indicates one of two things:  
l
The high-beam headlights are on.  
The turn signal lever is in the flash-to-  
Gear position indicator  
l
In manual shift mode, the “M” of the shift  
position indicator illuminates and the  
numeral for the selected gear displays.  
pass position.  
qTurn Signal/Hazard Warning  
Indicator Lights  
qSelect Mode Indication  
When operating the turn signal lights, the  
left or right turn signal indicator light  
flashes to indicate which turn signal light  
is operating (page 4-63).  
When the sport mode is selected, the  
select mode Indication turns on in the  
instrument cluster.  
NOTE  
When operating the hazard warning  
lights, both turn signal indicator lights  
flash (page 4-70).  
If the mode cannot be switched to drive mode,  
the select mode indication flashes to notify the  
driver.  
If an indicator light flashes abnormally,  
one of the turn signal bulbs may be  
burned out. Consult an Authorized Mazda  
Dealer.  
4-43  
When Driving  
Instrument Cluster and Display  
qSecurity Indicator Light  
q
Mazda Radar Cruise Control  
(MRCC) Warning Light (Amber)/  
Indicator Light (Green) (Type A)í  
This indicator light starts flashing every  
two seconds when the ignition is switched  
from ON to OFF and the immobilizer  
system is armed.  
Mazda Radar Cruise Control (MRCC)  
Warning Light (Amber)  
Illuminated  
The light stops flashing when the ignition  
is switched ON with the correct key.  
At this time, the immobilizer system is  
disarmed and the light illuminates for  
about three seconds and then turns off.  
When the ignition is switched ON, the  
warning light is illuminated and then turns  
off after a few seconds.  
The warning light turns on if there is a  
malfunction in the system while the  
Mazda Radar Cruise Control (MRCC)  
system is on. Have your vehicle inspected  
at an Authorized Mazda Dealer.  
If the engine does not start with the  
correct key, and the security indicator  
light keeps illuminating or flashing, the  
system may have a malfunction. Consult  
an Authorized Mazda Dealer.  
Mazda Radar Cruise Control (MRCC)  
Indicator Light (Green)  
Illuminated  
Illuminated when the speed for the Mazda  
Radar Cruise Control (MRCC) system is  
set.  
qCruise Main Indicator Light  
(Amber)/Cruise Set Indicator  
Light (Green)  
The indicator light has two colors.  
4-44  
íSome models.  
When Driving  
Instrument Cluster and Display  
Cruise Main Indicator Light (Amber)  
Type B  
The indicator light illuminates amber  
when the cruise control system is  
activated.  
This indicator light illuminates for a few  
seconds when the ignition is switched  
ON.  
The Blind Spot Monitoring (BSM) OFF  
indicator light illuminates when the Blind  
Spot Monitoring (BSM) switch is pressed  
to turn off the Blind Spot Monitoring  
(BSM) and Rear Cross Traffic Alert  
(RCTA) systems.  
Cruise Set Indicator Light (Green)  
The indicator light illuminates green when  
a cruising speed has been set.  
qBlind Spot Monitoring (BSM)  
OFF Indication/Indicator Lightí  
A problem in the system may be indicated  
under the following conditions. Have your  
vehicle inspected at an Authorized Mazda  
Dealer.  
l
The light does not turn on when the  
ignition is switched ON.  
It remains illuminated even though the  
l
Blind Spot Monitoring (BSM) switch  
has been switched off.  
It turns on while driving the vehicle.  
Type A  
l
The Blind Spot Monitoring (BSM) OFF  
indication illuminates when the Blind  
Spot Monitoring (BSM) switch is pressed  
to turn off the Blind Spot Monitoring  
(BSM) and Rear Cross Traffic Alert  
(RCTA) systems.  
If the indication remains displayed even  
though the Blind Spot Monitoring (BSM)  
switch has been operated, it indicates a  
problem in the system. Have your vehicle  
inspected at an Authorized Mazda Dealer.  
NOTE  
If the vehicle is driven on a road with less  
traffic and few vehicles that the radar sensors  
can detect, the system may pause (The Blind  
Spot Monitoring (BSM) OFF indication/  
indicator light in the instrument cluster  
illuminates). However, it does not indicate a  
malfunction.  
qLights-On Indicator Light  
This indicator light illuminates when the  
exterior lights and dashboard illumination  
are on.  
íSome models.  
4-45  
When Driving  
Instrument Cluster and Display  
The light continues to flash if the lighting  
system has a malfunction. Consult an  
Authorized Mazda Dealer.  
qLED Headlight Warning Lightí  
This warning light illuminates for a few  
seconds when the ignition is switched  
ON.  
This light illuminates if there is a  
malfunction in the LED headlight. Have  
your vehicle inspected by an Authorized  
Mazda Dealer.  
4-46  
íSome models.  

Related Topics

Meters and Gauges Warning/Indicator Lights

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot