Get Instrument Cluster and Display -> Meters and Gauges Guide for Mazda Cx-5 SUV First Generation (2013-2016)

When Driving

Instrument Cluster and Display

Meters and Gauges

Type A

Type B

Speedometer ....................................................................................................... page 4-11

Odometer, Trip Meter and Trip Meter Selector .................................................. page 4-11

Tachometer ........................................................................................................ page 4-12

Fuel Gauge ........................................................................................................ page 4-13

Dashboard Illumination ..................................................................................... page 4-14

Outside Temperature Display ............................................................................. page 4-14

Cruise Control Set Vehicle Speed Display (Type A instrument cluster) ............ page 4-15

Maintenance Monitor (Type A instrument cluster) ............................................ page 4-15

Trip Computer and INFO Switch ...................................................................... page 4-16

4-10

When Driving

Instrument Cluster and Display

Type B

qSpeedometer

The speedometer indicates the speed of

the vehicle.

qOdometer, Trip Meter and Trip

Meter Selector

Trip meter A

Odometer

The display mode can be changed

between trip meter A and trip meter B by

pressing the selector while one of them is

displayed. The selected mode will be

displayed.

Press the selector

Type A

Trip meter B

Odometer

Trip meter A

Odometer

Press the selector

NOTE

Press the selector

When the ignition is switched to ACC or OFF,

the odometer or trip meters cannot be

displayed, however, pressing the selector can

inadvertently switch the trip meters or reset

them during an approximate ten-minute period

in the following cases:

Trip meter B

Odometer

l

After the ignition is switched to OFF from

ON.

Press the selector

l

After the driver's door is opened.

Odometer

The odometer records the total distance

the vehicle has been driven.

Trip meter

The trip meter can record the total

distance of two trips. One is recorded in

trip meter A, and the other is recorded in

trip meter B.

4-11

When Driving

Instrument Cluster and Display

For instance, trip meter A can record the

distance from the point of origin, and trip

meter B can record the distance from

where the fuel tank is filled.

qTachometer

The tachometer shows engine speed in

thousands of revolutions per minute

(rpm).

When trip meter A is selected, pressing

the selector again within one second will

change to trip meter B mode.

CAUTION

Do not run the engine with the

tachometer needle in the RED ZONE.

This may cause severe engine

damage.

When trip meter A is selected, TRIP A

will be displayed. When trip meter B is

selected, TRIP B will be displayed.

The trip meter records the total distance

the vehicle is driven until the meter is

again reset. Return it to “0.0” by holding

the selector depressed for 1 second or

more. Use this meter to measure trip

distances and to compute fuel

*¹Striped zone

*¹Red zone

consumption.

*¹The range varies depending on the type

of gauge.

NOTE

l

(Vehicles with type B audio)

If the fuel economy data is reset using the

fuel economy monitor, or trip A is reset

using the trip meter when the function

which synchronizes the fuel economy

monitor and the trip meter is on, the fuel

economy data and trip A are reset

simultaneously.

NOTE

When the tachometer needle enters the

STRIPED ZONE, this indicates to the driver

that the gears should be shifted before entering

the RED ZONE.

Refer to Fuel Economy Monitor on page

4-84.

l

Only the trip meters record tenths of

kilometers (miles).

l

The trip record will be erased when:

l

The power supply is interrupted (blown

fuse or the battery is disconnected).

The vehicle is driven over 9999.9 km

l

(mile).

4-12

When Driving

Instrument Cluster and Display

Type B

qFuel Gauge

The fuel gauge shows approximately how

much fuel is remaining in the tank when

the ignition is switched ON. We

recommend keeping the tank over 1/4 full.

Type A

Full

1/4 Full

Empty

1/4 Full

Empty

If the low fuel warning light illuminates or

the fuel level is very low, refuel as soon as

possible.

Refer to Warning/Indicator Lights on page

4-20.

NOTE

l

After refueling, it may require some time for

the indicator to stabilize. In addition, the

indicator may deviate while driving on a

slope or curve since the fuel moves in the

tank.

l

The display indicating a quarter or less

remaining fuel has more segments to show

the remaining fuel level in greater detail.

l

The direction of the arrow (

) indicates

that the fuel-filler lid is on the left side of

the vehicle.

4-13

When Driving

Instrument Cluster and Display

NOTE

qDashboard Illumination

l

This symbol (

adjust the brightness of the dashboard

illumination.

) indicates the knob to

Rotate the knob to adjust the brightness of

the instrument cluster and other

illuminations in the dashboard.

l

If the dashboard illumination knob is kept

at the illumination dimmer cancel position,

the instrument cluster will not dim when the

NOTE

l

The brightness of dashboard illuminations

headlight switch is turned to the

or

can be adjusted when the headlights and

Parking lights are turned on.

When the dashboard illumination

brightness cannot be adjusted any more, a

beep sound will be heard.

position again. Rotate the dashboard

illumination knob counterclockwise to

activate the illumination dimmer.

l

qOutside Temperature Display

Dim

When the ignition is switched ON, the

outside temperature is displayed.

Type A

Bright

Type B

Canceling the illumination dimmer

When the headlight switch is in the

or

position, the illumination of the

NOTE

instrument cluster dims.

Under the following conditions, the outside

temperature display may differ from the actual

outside temperature depending on the

surroundings and vehicle conditions:

When driving on snowy or foggy roads,

or in other situations when the instrument

cluster's visibility is reduced due to glare

from surrounding brightness, cancel the

illumination dimmer and increase the

illumination intensity.

l

Significantly cold or hot temperatures.

l

Sudden changes in outside temperature.

l

The vehicle is parked.

l

The vehicle is driven at low speeds.

To cancel the illumination dimmer, rotate

the knob clockwise fully. You will hear a

beep sound and the illumination dimmer

will be canceled.

4-14

When Driving

Instrument Cluster and Display

l

(Vehicles with type A audio)

Tire Rotation

Oil Change

l

The outside temperature unit can be

switched between Celsius and Fahrenheit

using the following procedure.

For the setting method and indications for

the maintenance monitor, refer to the

Maintenance Monitor.

Refer to Maintenance Monitor on page

6-20.

The maintenance monitor displays the

information when the ignition is switched

ON.

1. Press the INFO button with the ignition

switched off and continue pressing the

INFO button for 5 seconds or longer

while switching the ignition ON. The

outside temperature display flashes.

2. Press the up

or down

part of the

NOTE

INFO switch to change the outside

temperature unit.

This function is inoperable while the vehicle is

being driven.

3. Press and hold the INFO button for 3

seconds or longer while the outside

temperature display is flashing. The

outside temperature display

illuminates.

Message display

When the remaining time or the distance

approaches 0, a message is displayed each

time the ignition is switched ON.

q

Cruise Control Set Vehicle Speed

Display (Type A instrument cluster)

The vehicle speed preset using the cruise

control is displayed.

qMaintenance Monitor (Type A

instrument cluster)

The following maintenance period

notifications can be displayed by turning

the Maintenance Monitor on.

l

Scheduled Maintenance

4-15

When Driving

Instrument Cluster and Display

NOTE

Distance-to-empty mode

l

If any of the INFO switches (up

, down

This mode displays the approximate

distance you can travel on the remaining

fuel based on the fuel economy.

, or INFO button) is pressed while a

message is displayed, it will no longer be

displayed the next time the ignition is

switched ON.

The distance-to-empty will be calculated

and displayed every second.

l

After the vehicle is serviced and the

remaining time/distance is reset, the

message for the next maintenance period

will be displayed when the remaining

distance or time to the next maintenance

period approaches 0 (displays when engine

is started).

Type A

l

If there are multiple messages, they are

displayed according to their order.

If OFF is set for Messages, messages are

not displayed.

qTrip Computer and INFO Switch

Type B

The following information can be selected

by pressing the up

or down

part of

the INFO switch with the ignition

switched ON.

l

Approximate distance you can travel

on the available fuel

l

Average fuel economy

Current fuel economy

Average vehicle speed

Lane departure warning system

(LDWS) display (Type A instrument

cluster)^í

l

Mazda Radar Cruise Control (MRCC)

display (Type A instrument cluster)^í

Distance Recognition Support System

(DRSS) display (Type A instrument

cluster)^í

l

Warning (Type A instrument cluster)

If you have any problems with your trip

computer, consult an Authorized Mazda

Dealer.

4-16

^íSome models.

When Driving

Instrument Cluster and Display

NOTE

Average fuel economy mode

l

Even though the distance-to-empty display

This mode displays the average fuel

economy by calculating the total fuel

consumption and the total traveled

distance since purchasing the vehicle, re-

connecting the battery after disconnection,

or resetting the data. The average fuel

economy is calculated and displayed

every minute.

may indicate a sufficient amount of

remaining driving distance before refueling

is required, refuel as soon as possible if the

fuel level is very low or the low fuel

warning light illuminates.

The display will not change unless you add

more than approximately 10 L (2.6 US gal,

2.2 Imp gal) of fuel.

The distance-to-empty is the approximate

remaining distance the vehicle can be

driven until all the graduation marks in the

fuel gauge indicating the remaining fuel

supply disappear.

l

Type A

l

If there is no past fuel economy information

such as after first purchasing your vehicle

or the information is deleted when the

battery cables are disconnected, the actual

distance-to empty/range may differ from the

amount indicated.

Type B

To clear the data being displayed, press

the INFO button for more than 1.5

seconds.

After pressing the INFO button, - - - L/

100 km (- - - mpg) will be displayed for

about 1 minute before the fuel economy is

recalculated and displayed.

Current fuel economy mode

This mode displays the current fuel

economy by calculating the amount of

fuel consumption and the distance

traveled.

4-17

When Driving

Instrument Cluster and Display

Current fuel economy will be calculated

and displayed every 2 seconds.

Average vehicle speed will be calculated

and displayed every 10 seconds.

Type A

Type B

When you've slowed to about 5 km/h (3

mph), - - - L/100 km (- - - mpg) will be

displayed.

To clear the data being displayed, press

the INFO button for more than 1.5

seconds. After pressing the INFO button,

- - - km/h (- - - mph) will be displayed for

about 1 minute before the vehicle speed is

recalculated and displayed.

Average vehicle speed mode

This mode displays the average vehicle

speed by calculating the distance and the

time traveled since connecting the battery

or resetting the data.

Lane Departure Warning System

(LDWS) display (Type A instrument

cluster)^í

Information regarding the Lane Departure

Warning System (LDWS) is displayed.

4-18

^íSome models.

When Driving

Instrument Cluster and Display

Refer to Lane Departure Warning System

(LDWS) on page 4-96.

Refer to Distance Recognition Support

System (DRSS) on page 4-108.

Mazda Radar Cruise Control (MRCC)

display (Type A instrument cluster)^í

Warning (Display Indication) (Type A

instrument cluster)

Information regarding the Mazda Radar

Cruise Control (MRCC) is displayed.

Refer to Mazda Radar Cruise Control

(MRCC) on page 4-116.

A message is displayed to notify the user

of the system operation status and

malfunctions or abnormalities.

Check the indicated message.

Distance Recognition Support System

(DRSS) display (Type A instrument

cluster)^í

Information regarding the Distance

Recognition Support System (DRSS) is

displayed.

^íSome models.

4-19

Instrument Cluster and Display -> Meters and Gauges for Your Mazda Cx-5 SUV First Generation (2013-2016)

Related Topics

Popular Owner Manuals

Latest Owner Manuals