2013-2016 Mazda Cx-5 SUV Seats -> Rear Seat User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Seats -> Rear Seat for Your Mazda Cx-5 SUV First Generation (2013-2016)

Essential Safety Equipment  
Seats  
NOTE  
Rear Seat  
l
If there is no seat position movement, a  
beep is not heard.  
When the ignition is switched ON, the seat  
qSplit Folding  
l
position memory function does not operate  
unless the selector lever is in the P position  
(Automatic transaxle) or the parking brake  
is applied (Manual transaxle).  
The seatbacks can be folded down to  
provide more space in the luggage  
compartment.  
l
When the ignition is switched OFF, the seat  
WARNING  
position memory function is operable while  
the selector lever is in a position other than  
P position (Automatic transaxle) or the  
parking brake is not applied (Manual  
transaxle), however, if the ignition is  
switched ON while the seat position  
memory function is operating, the operation  
is stopped.  
Tightly secure cargo in the luggage  
compartment when it is transported  
with the seatbacks folded down:  
Driving without tightly securing  
cargo and luggage is dangerous as it  
could move and become an  
obstruction to driving during  
emergency braking or a collision  
resulting in an unexpected accident.  
l
The seat position adjustment is canceled in  
the following cases:  
l
Always remove the child-restraint  
system from the rear seat before  
operating the remote handle levers for  
the rear seat (Vehicles with remote  
handle):  
Any of the seat adjustment switches is  
operated.  
The SET button is pressed.  
Programming button 1 or 2 is pressed.  
The key  
l
l
l
switch or  
switch is  
Operating the remote handle levers  
while a rear-facing child-restraint  
system is in the rear seat is  
dangerous. It could cause injury to a  
child seated in the child-restraint  
system when the seatback suddenly  
flips forward.  
operated.  
The vehicle starts moving.  
l
Erasing programmed seat positions  
(Erasing the seat positions programmed  
to the key)  
1. Switch the ignition OFF.  
2. Press the SET button on the seat until a  
beep sound is heard one time.  
3. After the beep sounds, press the key  
switch within 5 seconds until a beep  
sound is heard one time.  
NOTE  
If a beep sound is heard three times, the  
operation is canceled.  
2-10  
Essential Safety Equipment  
Seats  
Make sure there is nobody in the rear  
seat area before operating (pulling) the  
remote handle levers (Vehicles with  
remote handle):  
CAUTION  
Ø When operating the rear seatback  
knob, make sure you support the  
seatback with your hand. If the  
seatback is not supported with  
your hand, it will flip forward  
suddenly and could cause injury to  
the finger that pushes the rear  
seatback knob down.  
Ø (Vehicles with remote handle)  
Before folding the seatbacks down  
with the remote handle levers,  
make sure there is no cup in a rear  
cup holder. Folding the seatbacks  
with the remote handle levers  
while a cup is in the cup holder  
could soil or damage the seat  
bottom and seatback.  
Not checking the rear seat area for  
persons before folding the seatbacks  
with the strap/remote handle levers  
is dangerous. The rear seat area is  
difficult to see from the rear of the  
vehicle. Operating (pulling) the  
remote handle levers without  
checking could cause injury to a  
person when a seatback suddenly  
flips forward.  
Ø (Vehicles with remote handle)  
Be careful of the following when  
using the remote handle levers:  
Ø
On a downward slope, the  
seatback could flip forward  
faster than on a flat surface.  
On an upward slope, the  
seatback may not fold down.  
When the seatbacks cannot be  
folded down with levers, pull  
the rear seatback forward from  
inside the vehicle.  
Ø
2-11  
Essential Safety Equipment  
Seats  
Folding both seatbacks down  
CAUTION  
(Folding the left seatback)  
CAUTION  
Be careful when operating the remote  
handle with the center seat folded  
down. If a person sitting in the right  
rear seat places a hand on the center  
seat, it could be pinched by a  
seatback or seat component causing  
injury.  
Check the position of a front seat  
before folding a rear seatback.  
Depending on the position of a front  
seat, it may not be possible to fold a  
rear seatback all the way down  
because it may hit the seatback of  
the front seat which could scratch or  
damage the front seat or its pocket.  
Lower or remove the head restraint  
on the rear outboard seat if  
necessary.  
Using remote handleí  
After checking that the rear seats are clear,  
open the liftgate and lower the seatback  
you want to fold down using the remote  
handle.  
When folding the left side, operate the  
outer part of the remote handle.  
Using push knob  
Push the rear seatback knob down.  
Folding only center seatí  
Using remote handle  
1. If the center head restraint is in the  
position for use, store it.  
2-12  
íSome models.  
Essential Safety Equipment  
Seats  
2. After checking that the center seat is  
clear, open the liftgate and pull the  
inside remote handle levers on the left  
side of the liftgate compartment.  
WARNING  
Always make sure the seat belts are  
fully pulled out from under the  
seatbacks:  
A seat belt caught under a seatback  
after the seatback is returned to its  
upright position is dangerous. In a  
collision or sudden stop, the seat belt  
cannot provide adequate protection.  
When returning the seatback to the  
upright position, make sure there is no  
red indication:  
A rear seatback not fully returned  
and locked in the upright position is  
dangerous. Sudden stops or  
maneuvering could cause a seatback  
to flip forward suddenly resulting in  
injury. If the red indicator is visible on  
the back of the rear seatback knob,  
the seatback is not locked in the  
upright position.  
Using strap  
1. If the center head restraint is in the  
position for use, store it.  
2. Pull the strap on the back of the  
seatback to fold the seatback forward.  
Locked position  
Unlocked position  
Red indicator  
To return the seatbacks to the upright  
position  
1. Lift the seatbacks upright.  
2. Pull on the top of the seatbacks from  
inside the vehicle to make sure they are  
locked.  
2-13  

Related Topics

Popular Owner Manuals