Get Interior Comfort Guide for Mazda Mx-5 SUV Third Generation (2005-2015)

Interior Comfort

6

Use of various features for drive comfort, including air-conditioning and audio

system.

Climate Control System ............................................................... 6-2

Operating Tips ........................................................................... 6-2

Vent Operation .......................................................................... 6-3

Types of the Climate Control System ....................................... 6-5

Manual Type^í.......................................................................... 6-6

Automatic Type^í.................................................................... 6-10

Audio System ............................................................................... 6-14

Antenna ................................................................................... 6-14

Operating Tips for Audio System ........................................... 6-15

Audio Set ................................................................................ 6-25

Audio Control Switch Operation^í......................................... 6-56

AUX Mode (Auxiliary input) ................................................. 6-58

Safety Certification ................................................................. 6-60

Bluetooth Hands-Free................................................................. 6-61

Bluetooth Hands-Free^í.......................................................... 6-61

Basic Bluetooth Hands-Free Operation................................... 6-64

Convenient Use of the Hands-Free System ............................. 6-68

Hands-Free Telephone Setting ................................................ 6-73

When Bluetooth Hands-Free cannot be used .......................... 6-78

Safety Certification ................................................................. 6-78

Mazda Bluetooth Hands-Free Customer Service .................... 6-79

Interior Equipment ..................................................................... 6-80

Sunvisors ................................................................................. 6-80

Interior Lights ......................................................................... 6-80

Cup Holder .............................................................................. 6-81

Multi-Pocket ........................................................................... 6-81

Storage Compartments ............................................................ 6-82

Accessory Socket .................................................................... 6-83

Windblocker ............................................................................ 6-84

^íSome models.

6-1

Interior Comfort

Climate Control System

qNot Using for a Long Period

Operating Tips

Run the air conditioner about 10 minutes

at least once a month to keep internal

parts lubricated.

qOperating the Climate Control

System

Operate the climate control system with

the engine running.

qCheck the Refrigerant before the

Weather Gets Hot

NOTE

Have the air conditioner checked before

the weather gets hot. Lack of refrigerant

may make the air conditioner less

efficient. Consult an Authorized Mazda

Dealer for refrigerant inspection.

To prevent the battery from being discharged,

do not leave the fan control dial on for a long

period of time with the ignition switch in the

ON position when the engine is not running.

qClearing the Air Inlet

The air conditioner is filled with

HFC134a (R134a), a refrigerant that will

not damage the ozone layer.

If the air conditioner is low on refrigerant

or has a malfunction, consult an

Authorized Mazda Dealer.

Clear all obstructions such as leaves,

snow and ice from the hood and the air

inlet in the cowl grille to improve the

system efficiency.

qFoggy Windows

The windows may fog up easily in humid

weather. Use the climate control system to

defog the windows.

To help defog the windows, operate the

air conditioner to dehumidify the air.

NOTE

The air conditioner may be used along with the

heater to dehumidify the air.

qParking in Direct Sunlight

If the vehicle has been parked in direct

sunlight during hot weather, open the

windows to let warm air escape, then run

the climate control system.

6-2

Interior Comfort

Climate Control System

Vent Operation

Button

qAdjusting the Vents

Directing airflow

You can direct air flow by rotating the vent.

Opening/closing vents

The two outside vents can be opened and closed with center button.

NOTE

When using the air conditioner, mist may come out from the vents. This is not a sign of trouble but a

result of humid air being suddenly cooled.

6-3

Interior Comfort

Climate Control System

qSelecting the Airflow Mode

Dashboard Vents

Dashboard Vents (OPEN MODE)

Floor Vents

Dashboard and Floor Vents (OPEN MODE)

Defroster and Floor Vents

Floor Vents (OPEN MODE)

Defroster Vents

You will feel more comfortable by using

the OPEN MODE when opening the roof.

6-4

Interior Comfort

Climate Control System

Types of the Climate Control System

Manual type and automatic type climate control systems are explained separately. Check

your vehicle's climate control type and read the appropriate pages.

Manual Type ............................................................................................................ page 6-6

Automatic Type ...................................................................................................... page 6-10

Type A

Type B

6-5

Interior Comfort

Climate Control System

Manual Type^í

Fan control dial

Mode selector dial

Temperature control dial

Air intake selector

A/C switch

Some models.

NOTE

When the mode is set to

qControl Switches

,

or

with

Temperature control dial

the fan control dial in a position other than 0

and the temperature control dial in the

maximum cold position, the air intake selector

switches to the recirculated air mode and the

A/C turns on automatically.

If A/C is not desired, press the A/C switch to

turn it off.

Cold

Hot

Fan control dial

This dial controls temperature. Turn it

clockwise for hot and counterclockwise

for cold.

Slow

Fast

6-6

^íSome models.

Interior Comfort

Climate Control System

Turn the dial to adjust to the desired fan

speed.

Air intake selector

Turning the dial clockwise increases the

fan speed.

Turning the dial counterclockwise

decreases the fan speed.

Mode selector dial

This switch controls the source of air

entering the vehicle.

Press the

switch to alternate

between the outside air and recirculated

air modes.

Turn the mode selector dial to select

airflow mode (page 6-4).

It is recommended that under normal

conditions the switch be kept in the

outside air mode.

NOTE

Turn the mode selector dial to an OPEN

MODE position for maximum comfort while

the roof is open.

Outside air mode (indicator light

turned off)

Outside air is taken into the vehicle. Use

this mode for normal ventilation and

heating.

í

A/C switch

Recirculated air mode (indicator light

illuminated)

Outside air is shut off. Air within the

vehicle is recirculated.

This mode can be used when driving on a

dusty road or in similar conditions. It also

helps to provide quicker cooling of the

interior.

Press the A/C switch to turn the air

conditioner on. The indicator light on the

switch will illuminate when the fan

control dial is in any position except OFF.

Press the switch once again to turn the air

conditioner off.

NOTE

The air conditioner may not function when the

outside temperature approaches 0 °C (32 °F).

^íSome models.

6-7

Interior Comfort

Climate Control System

qCooling (With Air Conditioner)^í

WARNING

Do not use the recirculated air mode in

cold or rainy weather:

1. Set the mode selector dial to the

position.

or

Using the recirculated air mode in

cold or rainy weather is dangerous as

it will cause the windows to fog up.

Your vision will be hampered, which

could lead to a serious accident.

2. Set the temperature control dial to the

cold position.

3. Set the fan control dial to the desired

speed.

4. Turn on the air conditioner by pressing

the A/C switch.

qHeating

1. Set the mode selector dial to the

position.

or

5. Adjust the fan control dial and

temperature control dial to maintain

maximum comfort.

2. Set the temperature control dial to the

hot position.

CAUTION

When using the air conditioner while

driving up long hills or in heavy

traffic, closely monitor the

temperature gauge (page 5-39).

The air conditioner may cause engine

overheating. If the gauge indicates

overheating, turn the air conditioner

off (page 7-18).

3. Set the fan control dial to the desired

speed.

NOTE

l

If the windshield fogs up easily, set the

mode selector dial to the position.

l

If cooler air is desired at face level, set the

mode selector dial at the

position and

adjust the temperature control dial to

maintain maximum comfort.

NOTE

l

The air to the floor is warmer than air to

the face (except when the temperature

control dial is set at the extreme hot or cold

position).

l

When maximum cooling is desired, set the

temperature control dial to the extreme cold

position and set the air intake selector to

the recirculated air mode, then turn the fan

control dial fully clockwise.

In the

,

, or

position, the air

conditioner is automatically turned on

(however, the indicator light does not

illuminate) and the outside air mode is

automatically selected to defrost the

windshield.

l

If warmer air is desired at floor level, set

the mode selector dial at the

or

position and adjust the temperature control

dial to maintain maximum comfort.

The air to the floor is warmer than air to

the face (except when the temperature

control dial is set at the extreme hot or cold

position).

l

In the or

position, the outside air

mode cannot be changed to the recirculated

air mode.

6-8

^íSome models.

Interior Comfort

Climate Control System

NOTE

l

qVentilation

For maximum defrosting, set the

temperature control dial to the extreme hot

position and turn the fan control dial fully

clockwise.

If warm air is desired at the floor, set the

mode selector dial to the position.

1. Set the mode selector dial to the

position.

or

2. Set the air intake selector to the outside

air mode.

l

3. Set the temperature control dial to the

desired position.

In the

,

, or

position, the air

conditioner is automatically turned on

(however, the indicator light does not

illuminate) and the outside air mode is

automatically selected to defrost the

windshield.

4. Set the fan control dial to the desired

speed.

q

Windshield Defrosting and Defogging

In the or

position, the outside air

1. Set the mode selector dial to the

position.

mode cannot be changed to the recirculated

air mode.

2. Set the temperature control dial to the

desired position.

qDehumidifying (With Air

Conditioner)^í

3. Set the fan control dial to the desired

speed.

Operate the air conditioner in cool or cold

weather to help defog the windshield and

side windows.

WARNING

Do not defog the windshield using the

position with the temperature

1. Set the mode selector dial to the

desired position.

control set to the cold position:

2. Set the air intake selector to the outside

air mode.

Using the

position with the

temperature control set to the cold

position is dangerous as it will cause

the outside of the windshield to fog

up. Your vision will be hampered,

which could lead to a serious

3. Set the temperature control dial to the

desired position.

4. Set the fan control dial to the desired

speed.

accident. Set the temperature control

to the hot or warm position when

5. Turn on the air conditioner by pressing

the A/C switch.

using the

position.

NOTE

One of the functions of the air conditioner is

dehumidifying the air and, to use this function,

the temperature does not have to be set to cold.

Therefore, set the temperature control dial to

the desired position (hot or cold) and turn on

the air conditioner when you want to

dehumidify the cabin air.

^íSome models.

6-9

Interior Comfort

Climate Control System

Automatic Type^í

Type A

Mode selector dial

Temperature control dial

Fan control dial

Air intake selector

A/C switch

Type B

Mode selector dial

Temperature control dial

Fan control dial

Air intake selector

A/C switch

6-10

^íSome models.

Interior Comfort

Climate Control System

Except AUTO position

qControl Switches

The airflow amount can be adjusted to the

desired level by turning the dial.

Temperature control dial

OFF position

To turn off the system, set the dial to OFF.

Mode selector dial

Cold

Hot

This dial controls temperature. Turn it

clockwise for hot and counterclockwise

for cold.

NOTE

l

Turn the dial completely left to set the

Turn the mode selector dial to select

airflow mode (page 6-4).

temperature to maximum cooling, and

completely right for maximum heating.

l

When the mode is set to

,

or

AUTO position

with the fan control dial in a position other

than 0 and the temperature control dial in

the maximum cold position, the air intake

selector switches to the recirculated air

mode and the A/C turns on automatically. If

A/C is not desired, press the A/C switch to

turn it off.

The airflow mode automatically adjusts to

the selected temperature.

Except AUTO position

The desired airflow position can be

selected by turning the dial.

NOTE

With the airflow mode set to

Fan control dial

position and

the temperature control dial set at a medium

temperature, heated air is directed to the feet

and a comparably lower air temperature will

flow through the central, left and right vents.

Slow

A/C switch

Fast

This dial allows variable fan speeds.

AUTO position

The amount of airflow will be

automatically controlled in accordance

with the set temperature.

6-11

Interior Comfort

Climate Control System

With the fan control dial ON, press the

A/C switch to select the air conditioning

(cooling/dehumidifying functions) on or

off.

qOperation of Automatic Air

Conditioning

1. Set the mode selector dial to the AUTO

position.

NOTE

2. Set the air intake selector to the outside

air position (indicator light turned off).

The air conditioner may not function when the

outside temperature approaches 0 °C(32 °F).

3. Set the temperature control dial to the

desired position.

Air intake selector

4. Set the fan control dial to the AUTO

position.

5. Turn on the air conditioner.

To turn off the system, set the fan control

dial to OFF.

NOTE

l

Setting the temperature to maximum high

or low will not provide the desired

temperature at a faster rate.

Outside or recirculated air positions can

be selected. Press the switch to select

outside/recirculated air positions.

l

To prevent cool air blowing from the vents

Recirculated air position (indicator

light illuminated)

when heating right after starting the

engine, the amount of airflow is reduced

until the air warms up.

Use this position when going through

tunnels, driving in congested traffic (high

engine exhaust areas) or when quick

cooling is desired.

l

Turn the mode selector dial to an OPEN

MODE position for maximum comfort

while the roof is open. When the mode

selector dial is turned to the AUTO

Outside air position (indicator light

turned off)

position, OPEN MODE ( ) and (

)

vents will not be selected automatically.

Select them manually.

Use this position for normal conditions

and defogging.

q

Windshield Defrosting and Defogging

WARNING

Set the mode selector dial to the

position and turn the fan control dial to

the desired speed.

The outside air position is automatically

selected. The air conditioner will

automatically turn on and direct

dehumidified air to the front windshield

and side windows.

Do not use the

rainy weather:

Using the

position in cold or

rainy weather is dangerous as it will

cause the windows to fog up. Your

vision will be hampered, which could

lead to a serious accident.

6-12

Interior Comfort

Climate Control System

WARNING

Set the temperature control to hot or

warm position when using the

position:

Using the

position with the

temperature control set to the cold

position is dangerous as it will cause

the outside of the windshield to fog

up. Your vision will be hampered,

which could lead to a serious

accident.

Interior temperature

sensor

NOTE

Use the temperature control dial to increase

the air flow temperature and defog the

windshield more quickly.

qSunlight/Temperature Sensor

The automatic air conditioner function

measures inside and outside temperatures,

and sunlight. It then sets temperatures

inside the passenger compartment

accordingly.

CAUTION

Do not obstruct either sensor,

otherwise the automatic air

conditioner will not operate properly.

Sunlight sensor

6-13

Interior Comfort

Audio System

qSatellite Radio Antenna^í

Antenna

The satellite radio antenna receives

SIRIUS signals.

qAM/FM Radio Antenna

To remove the antenna, turn it

counterclockwise.

Satellite radio antenna

To install the antenna, turn it clockwise.

Make sure the antenna is securely

installed.

Install

Remove

CAUTION

To prevent damage to the antenna,

remove it before entering a car wash

facility or passing beneath a low

overhead clearance.

NOTE

When leaving your vehicle unattended, we

recommend that you remove the antenna and

store it inside the vehicle.

6-14

^íSome models.

Interior Comfort

Audio System

qRadio Reception

Operating Tips for Audio

System

AM characteristics

AM signals bend around such things as

buildings or mountains and bounce off the

ionosphere. Therefore, they can reach

longer distances than FM signals. Because

of this, two stations may sometimes be

picked up on the same frequency at the

same time.

WARNING

Do not adjust the audio control

switches while driving the vehicle:

Adjusting the audio while driving the

vehicle is dangerous as it could

distract your attention from the

vehicle operation which could lead to

a serious accident. Always adjust the

audio while the vehicle is stopped.

Even if the audio control switches are

equipped on the steering wheel, learn

to use the switches without looking

down at them so that you can keep

your maximum attention on the road

while driving the vehicle.

Ionosphere

Station 1

Station 2

FM characteristics

An FM broadcast range is usually about

40―50 km (25―30 miles) from the

source. Because of extra coding needed to

break the sound into two channels, stereo

FM has even less range than monaural

(non-stereo) FM.

CAUTION

For the purposes of safe driving,

adjust the audio volume to a level

that allows you to hear sounds

outside of the vehicle including car

horns and particularly emergency

vehicle sirens.

FM Station

NOTE

l

To prevent the battery from being

40—50km

(25—30 miles)

discharged, do not leave the audio system

on for a long period of time when the

engine is not running.

l

If a cellular phone or CB radio is used in

or near the vehicle, it could cause noise to

occur from the audio system, however, this

does not indicate that the system has been

damaged.

6-15

Interior Comfort

Audio System

Signals from an FM transmitter are similar

to beams of light because they do not

bend around corners, but they do reflect.

Unlike AM signals, FM signals cannot

travel beyond the horizon. Therefore, FM

stations cannot be received at the great

distances possible with AM reception.

Flutter/Skip noise

Signals from an FM transmitter move in

straight lines and become weak in valleys

between tall buildings, mountains, and

other obstacles. When a vehicle passes

through such an area, the reception

conditions may change suddenly, resulting

in annoying noise.

Ionosphere

FM wave

AM wave

FM wave

100—200 km (60—120 miles)

Atmospheric conditions can also affect

FM reception. High humidity will cause

poor reception. However, cloudy days

may provide better reception than clear

days.

Weak signal noise

In suburban areas, broadcast signals

become weak because of distance from

the transmitter. Reception in such fringe

areas is characterized by sound breakup.

Multipath noise

Since FM signals can be reflected by

obstructions, it is possible to receive both

the direct signal and the reflected signal at

the same time. This causes a slight delay

in reception and may be heard as a broken

sound or a distortion. This problem may

also be encountered when in close

proximity to the transmitter.

Reflected wave

Direct

6-16

Interior Comfort

Audio System

Strong signal noise

qOperating Tips for CD Player/In-

Dash CD Changer

This occurs very close to a transmitter

tower. The broadcast signals are

extremely strong, so the result is noise and

sound breakup at the radio receiver.

Condensation phenomenon

Immediately after turning on the heater

when the vehicle is cold, the CD or

optical components (prism and lens) in the

CD player/In-dash CD changer may

become clouded with condensation. At

this time, the CD will eject immediately

when placed in the unit. A clouded CD

can be corrected simply by wiping it with

a soft cloth. Clouded optical components

will clear naturally in about an hour. Wait

for normal operation to return before

attempting to use the unit.

Station drift noise

When a vehicle reaches the area of two

strong stations broadcasting at similar

frequencies, the original station may be

temporarily lost and the second station

picked up. At this time there will be some

noise from this disturbance.

Handling the CD player/In-dash CD

changer

The following precautions should be

observed.

l

Do not spill any liquid on the audio

system.

Station 2

88.3 MHz

Station 1

88.1 MHz

l

Do not insert any objects, other than

CDs, into the slot.

6-17

Interior Comfort

Audio System

l

The CD revolves at high speed within

the unit. Defective (cracked or badly

bent) CDs should never be used.

A new CD may have rough edges on

its inner and outer perimeters. If a disc

with rough edges is used, proper

setting will not be possible and the CD

player/In-dash CD changer will not

play the CD. In addition, the disc may

not eject resulting in a malfunction.

Remove the rough edges in advance by

using a ball-point pen or pencil as

shown below. To remove the rough

edges, rub the side of the pen or pencil

against the inner and outer perimeter of

the CD.

l

Do not use non-conventional discs

such as heart-shaped, octagonal discs,

etc. The disc may not eject resulting in

a malfunction.

l

When driving over uneven surfaces,

the sound may jump.

l

If the memory portion of the CD is

transparent or translucent, do not use

the disc.

l

The CD player/In-dash CD changer has

been designed to play CDs bearing the

identification logo as shown. No other

discs can be played.

Transparent

6-18

Interior Comfort

Audio System

l

Use discs that have been legitimately

produced. If illegally-copied discs such

as pirated discs are used, the system

may not operate properly.

Insert discs one by one. If two discs are

inserted at the same time, the system

may not operate properly.

The CD player/In-dash CD changer

ejects the CD if the CD is inserted

upside down. Also dirty and/or

defective CDs may be ejected.

Do not insert cleaning discs in the CD

player/In-dash CD changer.

l

Do not insert any disc with a peel-off

seal affixed to it.

This unit may not be able to play

certain CD-R/CD-RWs made using a

computer or music CD recorder due to

disc characteristics, scratches,

smudges, dirt, etc., or due to dust or

condensation on the lens inside the

unit.

Storing CDs in the vehicle exposed to

direct sunlight or high temperature may

damage the CD-R/CD-RWs, and make

them unplayable.

l

Be sure never to touch the signal

surface when handling the CDs. Pick

up a CD by grasping the outer edge or

the edge of the hole and the outer edge.

l

CD-R/CD-RW exceeding 700 MB

cannot be played.

This unit may not be able to play

certain discs made using a computer

due to the application (writing

software) setting used. (For details,

consult the store where the application

was purchased.)

It is possible that certain text data, such

as titles, recorded on a CD-R/CD-RW

may not be displayed when musical

data (CD-DA) is playing.

l

Do not stick paper or tape on the CD.

Avoid scratching the reverse side (the

side without a label). The disc may not

eject resulting in a malfunction.

Dust, finger smudges, and dirt can

decrease the amount of light reflected

from the signal surface, thus affecting

sound quality. If the CD should

l

become soiled, gently wipe it with a

soft cloth from the center of the CD to

the edge.

Do not use record sprays, antistatic

agents, or household spray cleaners.

Volatile chemicals such as benzine and

thinner can also damage the surface of

the CD and must not be used. Anything

that can damage, warp, or fog plastic

should never be used to clean CDs.

l

The period from when a CD-RW is

inserted to when it begins playing is

longer than a normal CD or CD-R.

Completely read the instruction manual

and cautions for CD-R/CD-RWs.

l

6-19

Interior Comfort

Audio System

l

Do not use discs with cellophane tape

This unit can play MP3 files that have

been recorded in bit rates of 8 kbps to

320 kbps. Nonetheless, to insure

enjoyment of music with consistent

sound quality, it is recommended to use

discs that have been recorded at a bit

rate of 128 kbps or more.

If a disc has both music data (CD-DA)

and MP3 files, playback of the two file

types differs depending on how the

disc was recorded.

adhering, partially peeled off labels, or

adhesive material exuding from the

edges of the CD label. Also, do not use

discs with a commercially-available

CD-R label affixed. The disc may not

eject resulting in a malfunction.

l

qOperating tips for MP3

NOTE

Supply of this product only conveys a license

for private, non-commercial use and does not

convey a license nor imply any right to use this

product in any commercial (i.e. revenue-

generating) real time broadcasting (terrestrial,

satellite, cable and/or any other media),

broadcasting/streaming via the Internet,

intranets and/or other networks or in other

electronic content distribution systems, such as

pay-audio or audio-on-demand applications.

An independent license for such use is

required. For details, please visit

l

Packet written discs cannot be played

on this unit.

This unit does not play CDs recorded

using MP3i (MP3 interactive), MP3

PRO and RIFF MP3 formats.

About folders and files

l

The order of hierarchy for MP3 files

and folders during playback or other

functions is from shallow to deep. The

arrangement and playing order of a

recorded disc containing MP3 files is

as follows:

http://www.mp3licensing.com.

l

File number

l

This audio system handles MP3 files

A numerical file number is assigned

to each file in a folder in the order of

hierarchy from shallow to deep.

that have been recorded on CD-R/CD-

RW/CD-ROMs. Discs that have been

recorded using the following formats

can be played:

l

Folder number

A numerical folder number is

assigned to each folder in the order

of hierarchy from shallow to deep.

l

ISO 9660 level 1

ISO 9660 level 2

Joliet extended format

Romeo extended format

l

NOTE

l

Folders and tracks (files) within the same

hierarchy play in the order they were written to

the disc depending on the write software.

This unit handles MP3 files

conforming to the MP3 format

containing both header frames and data

frames.

l

This unit can play multi-session

recorded discs that have up to 40

sessions.

This unit can play MP3s with sampling

l

frequencies of 16/22.05/24/32/44.1/48

kHz.

6-20

Interior Comfort

Audio System

l

The maximum number of characters

that can be used for file names is as

follows. However, this unit will only

display up to 32 characters, including

the file extension (.mp3).

Folder

No.

: Folder : Track (File)

01

02

03

04

Maximum number of

characters in a file name

(including a separator “.”

and the three letters of the

file extension)

3

2

4

05

ISO9660 level 1

12^*

31^*

ISO9660 level 2

Joliet extended

format

06

64

5

1

Romeo extended

format

128

* English one-byte characters (capitalized only) and

underbar “_” are available.

Level1

Level3

Level2

Level4

CAUTION

Playback may not occur in the above

hierarchy depending on the audio unit.

This unit can only play MP3 files that

have an MP3 file extension (.mp3)

attached. Do not attach an MP3 file

extension to any other type file as it

could cause noise to be emitted or a

malfunction in the unit.

l

The folder order is automatically

assigned and this order cannot be

optionally set.

Any folder without an MP3 file will be

ignored. (It will be skipped and the

folder number will not be displayed.)

MP3 files not conforming to the MP3

format containing both header frames

and data frames will be skipped and

not played.

This unit will play MP3 files that have

up to eight levels. However, the more

levels a disc has, the longer it will take

to initially start playing. It is

recommended to record discs with two

levels or less.

About ID3 Tag display

l

This unit can only display ID3 Tag

album, track and artist names that have

been input using Ver.1.0/1.1/2.2/2.3

formats. Any other data that may have

been input cannot be displayed.

l

This unit can only display English

(including numerals) one-byte

characters. Use only English (including

numerals) one-byte characters when

inputting ID3 tags. Two-byte characters

and some special symbols cannot be

displayed.

l

A single disc with up to 512 files can

be played and a single folder with up to

255 files can be played.

When naming an MP3 file, be sure to

add an MP3 file extension (.mp3) after

the file name.

6-21

Interior Comfort

Audio System

Specialized glossary

MP3

Bit rate

Refers to the volume of data per second,

expressed in bps (bits per second).

Generally, the larger the number of the

transfer bit rate when compressing an

MP3 file, the more information regarding

musical reproduction it carries, and

therefore the better the sound quality.

Abbreviation for “MPEG Audio Layer 3”.

A technical standard for audio

compression as decided by an ISO

(International Organization for

Standardization) MPEG working group.

Use of MP3 allows for audio data to be

compressed to approximately a tenth of

the source data size.

Packet writing

A general term for the method, similar to

that used for floppy discs or hard drives,

of recording the required file in a single

increment on a CD-R and similar.

ISO 9660

An international standard for logical

formatting of CD-ROM files and folders.

It is divided into three separate levels

based on differences in file naming

procedures, data configuration and other

characteristics.

ID3 Tag

ID3 tag is a method for storing

information related to the music in an

MP3 file. Information such as track, artist

and album name can be stored. This

content can be freely edited using ID3

editing function software.

Multi-session

A session is the complete amount of data

recorded from the beginning to the end of

a single period of CD-ROM, CD-R/CD-

RW data recording. Multi-session refers to

the existence of data from two or more

sessions on a single disc.

VBR

Abbreviation for Variable Bit Rate. While

CBR (Constant Bit Rate) is generally

used, VBR varies the bit rate for audio

compression according to compression

conditions and this allows for

Sampling

Refers to the process of encoding analog

audio data at regular intervals and

converting it to digital data. The sampling

rate refers to the number of times a

sample is taken in one second and is

expressed in Hz units. Increasing the

sampling rate improves the sound quality

but also increases the data size.

compression with preference given to

sound quality.

qOperating Tips for WMA

WMA is short for Windows Media Audio

and is the audio compression format used

by Microsoft.

Audio data can be created and stored at a

higher compression ratio than MP3.

* Microsoft and Windows Media are

registered trademarks of Microsoft

Corporation U.S. in the United States

and other countries.

6-22

Interior Comfort

Audio System

Playable WMA file specification

CD-R and CD-RW including WMA files

can be played with this unit. Discs which

conform to the following formats can be

played.

Playable WMA files are as follows:

Item

Content

Windows Media

Audio Version 7.0,

8.0, 9.0

Specification

32kHz. . . . . . . 32, 40,

48 kbps

44.1kHz . . . . . 32, 48,

64, 80, 96, 128, 160,

192 kbps

Sampling

frequency

Bit rate

48kHz. . . . . . . 64, 96,

128, 160, 192 kbps

VBR (Variable Bit Rate)

Channel mode

Supported

Stereo/Monaural

Title, artist name,

album name

WMA tag

CAUTION

This unit plays files with the (.wma)

file extension as a WMA file. Do not

use the WMA file extension for files

other than WMA files. It may cause

noise or a malfunction.

l

In a WMA file, the track name, artist

name and album name are recorded

with data called “WMA-Tag”, and the

information can be displayed.

WMA files which do not comply with

the specific standard may not be played

correctly or its file and folder name

may not be displayed correctly.

The file extension may not be provided

depending on the computer operating

system, version, software, or settings.

In this case, add the file extension

“.wma” to the end of the file name, and

then write the disc.

6-23

MEMO

6-24

Interior Comfort

Audio System

Audio Set

CD player

In-Dash CD Changer

Power/Volume/Sound Controls .............................................................................. page 6-26

Clock ...................................................................................................................... page 6-30

Operating the Radio ............................................................................................... page 6-32

Operating the Satellite Radio ................................................................................. page 6-34

Operating the Compact Disc (CD) Player .............................................................. page 6-46

Operating the In-Dash CD Changer ....................................................................... page 6-50

Operating the Auxiliary jack .................................................................................. page 6-54

Error Indications ..................................................................................................... page 6-55

6-25

Interior Comfort

Audio System

qPower/Volume/Sound Controls

Audio control dial

Power/Volume dial

Power ON/OFF

Audio sound adjustment

Turn the ignition switch to the ACC or

ON position.

1. Press the audio control dial to select the

function. The selected function will be

indicated.

Press the power/volume dial to turn the

audio system on.

Press the power/volume dial again to turn

the audio system off.

NOTE

To prevent the battery from being discharged,

do not leave the audio system on for a long

period of time when the engine is not running.

Volume adjustment

To adjust the volume, turn the power/

volume dial.

Turn the power/volume dial to the right to

increase volume, to the left to decrease it.

6-26

Interior Comfort

Audio System

* Depending on the mode selected, the

indication changes.

Standard audio-equipped model

2. Turn the audio control dial to adjust the

selected functions as follows:

Standard audio-equipped model

*

Indication

Turn Left Turn Right

Select mode

Decrease

bass

Increase

bass

Decrease

treble

Increase

treble

Shift the

sound to the sound to the

front

rear

Shift the

sound to the sound to the

Shift the

*

left

OFF

12Hr

right

ON

24Hr

(Flashing) (Flashing)

Bose^®Sound System-equipped model

Bose Sound System-equipped model

Indication

Turn Left Turn Right

OFF

ON

*

Decrease

bass

Increase

bass

Decrease

treble

Increase

treble

Shift the

sound to the sound to the

front

rear

Shift the

sound to the sound to the

left

OFF

12Hr

right

ON

*

24Hr

(Flashing) (Flashing)

6-27

Interior Comfort

Audio System

NOTE

Turn the audio control dial to select ALC

OFF or ALC LEVEL1―7 modes. The

selected mode will be indicated.

About 5 seconds after selecting any mode, the

volume function will be automatically selected.

To reset bass, treble, fade, and balance, press

the audio control dial for 2 seconds. The unit

will beep and “CLEAR” will be displayed.

Automatic Level Control (ALC)

The automatic level control is a feature

that automatically adjusts audio volume

and sound quality according to the vehicle

speed.

The volume increases in accordance with

the increase in vehicle speed, and

decreases as vehicle speed decreases.

Select the desired ALC mode.

Mode

Volume change

No change

Minimum

^*AudioPilot^®2 (Bose^®Sound System-

equipped model)

Medium

AudioPilot^®2 automatically adjusts audio

volume and sound quality in accordance

with the level of noise entering the vehicle

interior while driving. When AudioPilot^®

2 is turned on, the system automatically

calculates the conditions for optimum

hearing of sound which may be difficult

to hear depending on exterior noise.

Maximum

6-28

Interior Comfort

Audio System

The system is also equipped to optimally

adjust the acoustic characteristics

automatically while the roof is open or

closed. The acoustic adjustment occurs

with the lock/unlock operation of the top

latch on the roof, and while the

adjustment is being done, the audio is

muted for about 1.5 sec, and then fades in.

* AudioPilot^®2 is a registered trademark

of Bose Corporation.

BEEP setting

The beep-sound when operating the audio

system can be set on or off.

Time adjustment

Rotating the audio control dial switches

the display between 12 and 24-hour clock

time (page 6-30).

6-29

Interior Comfort

Audio System

qClock

Display

Hour set button

Audio control dial

Clock button

Minute set button

Setting the time

NOTE

l

When the clock button (

) is

The clock can be set at any time when the

ignition switch is in the ACC or ON

position.

released, the seconds are reset to “00”.

If the power supply to the unit is interrupted

(if the fuse blows or the vehicle's battery is

disconnected), the clock will need to be

reset.

l

1. To adjust the time, press the clock

button (

) for about 2 seconds

until a beep is heard.

The clock's current time will flash.

2. To advance the hours, press the hour

set button ( ). To advance the

minutes, press the minute set button

(

) while the time is flashing.

3. Press the clock button (

to start the clock.

) again

6-30

MEMO

6-31

Interior Comfort

Audio System

qOperating the Radio

Channel preset buttons Band selector button

Auto memory button

Display

Channel preset buttons

Scan button

Seek tuning buttons

Manual tuning dial

Radio ON

Tuning

Press a band selector button (

turn the radio on.

) to

The radio has the following tuning

methods: Manual, Seek, Scan, Preset

channel, and Auto memory tuning. The

easiest way to tune stations is to set them

on preset channels.

Band selection

Successively pressing the band selector

button ( ) switches the bands as

follows: FM1→FM2→AM.

NOTE

If the power supply is interrupted (fuse blows

or the battery is disconnected), the preset

channels will be erased.

The selected mode will be indicated. If

FM stereo is being received, “ST” will be

displayed.

Manual tuning

NOTE

Turning the manual tuning dial will

change the frequency higher or lower.

If the FM broadcast signal becomes weak,

reception automatically changes from

STEREO to MONO for reduced noise, and the

“ST” indicator will go out.

Seek tuning

Pressing the seek tuning button (

,

)

will cause the tuner to seek a higher or

lower frequency automatically.

6-32

Interior Comfort

Audio System

NOTE

Press and hold the auto memory button

If you continue to press and hold the button,

the frequency will continue changing without

stopping.

(

) for about 2 seconds until a beep

sound is heard; the system will

automatically scan and temporarily store

up to 6 stations with the strongest

frequencies in each selected band in that

area.

Scan tuning

Press the scan button (

) to

automatically sample strong stations.

Scanning stops at each station for about 5

seconds. To hold a station, press the scan

After scanning is completed, the station

with the strongest frequency will be tuned

and its frequency displayed.

button (

) again during this interval.

Press and release the auto memory button

Preset channel tuning

(

) to recall stations from the auto-

stored stations. One stored station will be

selected each time; its frequency and

channel number will be displayed.

The 6 preset channels can be used to store

6 AM and 12 FM stations.

1. To set a channel first select AM, FM1,

or FM2. Tune to the desired station.

NOTE

If no stations can be tuned after scanning

operations, “A” will be displayed.

2. Depress a channel preset button for

about 2 seconds until a beep sound is

heard. The preset channel number and

station frequency will be displayed.

The station is now held in the memory.

3. Repeat this operation for the other

stations and bands you want to store.

To tune one in the memory, select AM,

FM1, or FM2 and then press its

channel preset button. The station

frequency and the channel number will

be displayed.

NOTE

If the power supply is interrupted (fuse blows

or the battery is disconnected), the preset

channels will be erased.

Auto memory tuning

This is especially useful when driving in

an area where the local stations are not

known. Additional AM/FM stations can

be stored without disturbing the

previously set channels.

6-33

Interior Comfort

Audio System

qOperating the Satellite Radio^í

Channel preset buttons

Satellite button Electronic serial number button Channel preset buttons

Instant replay button Display

Band selector button

Text button

Category buttons

Scan button

Seek tuning buttons

Manual tuning dial

Information display

All operations of the satellite radio are displayed on the Information display.

Channel number, Channel name, Category name, Artist name, Song title,

ID code, Preset channel number, Bank number, Error signs

6-34

^íSome models.

Interior Comfort

Audio System

NOTE

What is satellite radio?

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses, and can radiate

radio frequency energy and if not installed and

used in accordance with the instructions, may

cause harmful interference to radio

communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the interference

by one or more of the following measures:

- Increase the separation between the

equipment and tuner.

With over 130 channels, SIRIUS Satellite

Radio brings you more of what you love.

Get 69 channels of 100 % commercial-

free music, plus all your favorite sports,

news, talk and entertainment. Everything

worth listening to is now on SIRIUS.

100 % Commercial-free Music―With

music from every genre, artist-dedicated

channels, live performances and more,

SIRIUS is the home of 100 %

commercial-free music.

Live Sports Play-by-Play & Expert

Talk―Hear every NFL game, every

NASCAR^®race and college sports

coverage from over 150 schools. Plus

24/7 sports talk with channels like

SIRIUS NFL Radio, SIRIUS NASCAR

Radio and more.

Exclusive Entertainment and

Talk―The biggest names, compelling

talk, hilarious comedy. Hear Howard

Stern, Martha Stewart, Jamie Foxx, Blue

Collar Comedy, Playboy Radio, political

talk and more.

World-class News―Stay informed with

FOX, CNN, CNBC, NPR^®, BBC and

more.

- Connect the equipment into an outlet on a

circuit different from that to which the tuner is

connected.

- Consult the dealer or an experienced radio/

TV technician for help.

Plus local traffic and weather.

Family & Kids―Entertain the entire

family with Radio Disney, Kids Place

Live, Laugh USA and more.

Sign up for SIRIUS Radio today! For

more information, visit www.sirius.com.

Satellite radio can be subscribed to and

received in the United States. (Except

Alaska and Hawaii) and Canada.

How to Activate Satellite Radio

You must call SIRIUS to activate your

service. Activation is free and takes only a

few minutes.

6-35

Interior Comfort

Audio System

SIRIUS service uses an ID code to

identify your radio. This code is needed to

activate SIRIUS service, and report any

problems.

Every time the satellite button is pressed,

the bank changes in the order shown

below.

To activate you SIRIUS radio tuner, call a

SIRIUS customer service specialist at 1-

888-539-7474 or you can visit SIRIUS

online at www.sirius.com.

SR1

SR2

SR3

Please have the following information

ready:

l

SIRIUS ID (12-digit electronic serial

no., or ESN^*)

l

Valid credit card information (may not

be required at initial sign-up)

NOTE

SR1, SR2 and SR3: six stations can be stored

in each bank for convenient access to your

favorite stations.

Be sure you are parked outside with a

clear view of open sky, you will be

instructed to turn on your radio (in SAT

mode and tuned to channel 184).

Activation typically takes only 2―5

minutes.

Operation in the initial state

It may take some time to start up the

equipment when it is in the initial state,

when there is a change in the user's

subscription condition, or when the

SIRIUS channel map is changed.

“UPDATING xx%” is displayed when the

SIRIUS channel map is changed. If the

unit is initialized or the user contract

content is changed, “UPDATING” is

displayed. Updating could take as long as

three minutes depending on the

geographical area. When the unit is in an

initialized state, channel 184 is displayed

after the display indicates

“UPDATING 100%”. If the SIRIUS

channel map or the user contract content

is changed, the channel prior to the

change is displayed after “UPDATING” is

displayed. After the initialization display,

it may take as long as 12 seconds to

receive channel 184.

*ESN: Electronic Serial Number

SIRIUS operation

All operations of the satellite radio are

conducted by means of the audio unit.

SIRIUS radio mode selection

When the satellite button is pressed during

ACC ON, it will play the last SIRIUS

channel in use before the mode was

switched over to another mode or the

power was turned off.

When the satellite button is pressed in a

mode other than the SIRIUS mode, the

last channel in use will be received.

6-36

Interior Comfort

Audio System

NOTE

Do not perform the following operation while

“UPDATING” is displayed. Otherwise, the

updating procedure will be cancelled.

If the last channel selected has become

unavailable because of a channel update the

above indication is displayed until any button

is pressed.

l

Turning off the audio power

l

Switching to other modes

Preset channel programming

l

Turning the ignition off

(Programming with “channel number”

display)

When the SIRIUS mode is switched to

another mode, or when the power is

turned off, the present channel which is

being received is stored as the last

channel.

1. Select the desired channel to be

programmed. At this point, the

following is displayed:

[SR

number)]

(bank number)

(channel

Channel selection

Turning the manual tuning dial allows you

to select the desired receiving channel.

2. Keep pressing the channel preset

button for 1.5 seconds or more.

l

Turn the knob clockwise: Channel Up

Turn the knob counterclockwise:

The programming process is complete

after the channel number flashes. Then,

[SR

and a beep sound is heard at the same

time.

l

Channel Down

(bank number)] is displayed

Unsubscribed channel

When a selected station has not been

subscribed to, the display indicates the

following:

3. [SR

(preset number)

are displayed.

(bank number)

CH

(channel number)]

[CALL

888] and [539

SIRI]

(Flashes alternately)

(Programming with “text” display (e.g.

channel name))

NOTE

When the subscription contract is canceled, all

of the channels including channel 184 appear

as unsubscribed.

1. Select the desired channel to be

programmed. At this point, the

following is displayed:

Invalid channel

[SR

(bank number)

(selected

text (e.g. channel name))]

When a selected channel is not

broadcasting, [SR

INVALID] is displayed for one second,

followed by [SR (bank number)

CHANNEL], which is also displayed for

one second. The display then returns to

the previous valid channel.

(bank number)

2. Keep pressing the channel preset

button for 1.5 seconds or more.

The programming process is complete

after the text (e.g. channel name)

flashes. Then, [SR

(bank number)]

is displayed and you will hear beep

sound at the same time.

6-37

Interior Comfort

Audio System

3. SR

(preset number)

are displayed.

(bank number)

CH

Highest category → All categories →

Lowest category

(channel number)]

NOTE

While all categories are selected, all channels

covering a category can be accessed

(Category off condition).

4. Three seconds later, it returns to normal

display. [SR (bank number) (text

(e.g. channel name))]

NOTE

Channel selection within a category

Six stations can be stored in each bank, SR1,

SR2, and SR3 for convenient access to your

favorite stations.

If you are in a selected category and the

channel number is displayed, turning the

manual tuning dial moves the channel

number up/down in that category.

Preset channel call-up

l

Turn the manual tuning dial clockwise:

Press and release the channel preset

button,

[SR

Channel Up

Turn the manual tuning dial

l

(bank number)

CH

(preset

counterclockwise: Channel Down

number)

(channel number)] appears.

NOTE

When the preset button is pressed during

text mode, its channel number is

displayed first for three second and then

its text is displayed.

The channel number needs to be indicated in

the display to use manual tuning dial for this

function.

NOTE

Scan tuning

In the initial setting, all channels are preset to

184.

Press the scan button (

automatically sample stations. Scanning

stops at each station for about five

seconds. To hold a station, press the scan

button (

) to

Category change

Press the category button (UP or DOWN)

and select the desired category.

) again during this interval.

l

NOTE

Press the category button (UP):

l

Unsubscribed channels, invalid channels

and parental lock channels are not subject

to the scan, therefore these channels will

skip automatically.

Category up

Press the category button (DOWN):

l

Category down

Every time the category (UP) button is

pressed for 1.5 second or less, the

category is changed over in the order

shown below.

At this time, the lowest (smallest-number)

channel within the category indicated is

received.

l

You can scan all channels while all

categories are selected. If you are in a

selected category, you can only scan the

channels in that category.

When the highest (or lowest) category is

reached, the category is changed over in

the order shown below.

6-38

Interior Comfort

Audio System

l

Channel number, channel name,

category, artist, song titles and info

display

The long name is displayed first, and

three seconds later the short name is

displayed. If there is no short name, the

long name is displayed.

To display the rest of the characters of

the channel name, press and hold the

Each time the text button is pressed

during SIRIUS reception, the display of

the text data is changed over in the order

shown below.

text button (

). The display

scrolls the next ten characters. Press

and hold the text button (

) again

after the last ten characters have been

displayed to return to the beginning of

the title.

Press and hold the text button while the

short name is displayed to switch the

display to the long name.

Three seconds after scrolling the long

name, the display automatically returns

to the first part of the long name. Three

more seconds and the short name

appears.

Channel number

Song title

Channel name

l

Category

name

Info

Artist name

NOTE

l

If there is no channel name,

“NO TITLE” is displayed.

l

Ten characters are displayed on one screen.

To display the rest of the characters of a

long title, press and hold the text button

l

(Category name display)

(

). The display scrolls the next ten

characters. Press and hold the text button

) again after the last ten

l

When the text button is pressed while

in channel name display mode, it

changes to the category name display

mode.

(

characters have been displayed to return to

the beginning of the title.

l

There are short (eight fixed characters)

and long names for the category name.

The long name is displayed first, and

three seconds later the short name is

displayed. If there is no short name, the

long name is displayed.

(Channel number display)

l

When the text button is pressed while

in info display mode, the mode

changes to the channel number display

mode.

l

To display the rest of the characters of

the category name, press and hold the

(Channel name display)

text button (

). The display

l

When the text button is pressed while

scrolls the next ten characters. Press

in channel number display mode, it

changes to channel name display

mode.

and hold the text button (

after the last ten characters have been

displayed to return to the beginning of

the title.

) again

l

There are short (eight fixed characters)

and long names for the channel name.

6-39

Interior Comfort

Audio System

l

Press and hold the text button while the

short name is displayed to switch the

display to the long name.

Three more seconds after scrolling the

song title, the display automatically

returns to display the first part of the

song title.

If there is no song title, “NO SONG” is

displayed.

l

Three seconds after scrolling the long

name, the display automatically returns

to display the first part of the long

name. Three more seconds and the

short name appears.

If there is no category name,

“NO CATEGORY” is displayed.

(INFO (such as composer's name)

display)

l

When the text button is pressed while

in song title display mode, it changes to

the INFO display mode.

To display the rest of the characters of

(Artist name display)

l

When the text button is pressed while

in category name display mode, it

changes to the artist name display

mode.

the composer's name, press and hold

the text button (

). The display

scrolls the next ten characters. Press

l

To display the rest of the characters of

and hold the text button (

) again

the artist's name, press and hold the

after the last ten characters have been

displayed to return to the beginning of

the title.

text button (

). The display

scrolls the next ten characters. Press

l

and hold the text button (

) again

Three seconds after scrolling the text,

the display automatically returns to

display the first part of the text.

If there is no composer name,

“NO INFO” is displayed.

after the last ten characters have been

displayed to return to the beginning of

the title.

Three seconds after scrolling the artist

name, the display automatically return

to display the first part of the artist's

name.

l

Instant replay

This function allows you to rewind and

replay the program that you were

previously or are currently listening to.

Press the instant replay button ( ).

When the seek tuning button ( ) is

pressed (about 1.5 seconds), playback

starts from the beginning of the current

program.

When the seek tuning button ( ) is

pressed twice, playback starts from the

beginning of the previous program.

When the seek tuning button ( ) is

pressed for about 1.5 seconds or longer,

the program is reversed while the button

is being pressed.

If there is no artist's name,

“NO ARTIST” is displayed.

(Song title display)

l

When the text button is pressed while

in artist name display mode, it changes

to the song title display mode.

To display the rest of the characters of

the song title, press and hold the text

l

button (

next ten characters. Press and hold the

text button ( ) again after the last

). The display scrolls the

ten characters have been displayed to

return to the beginning of the title.

6-40

Interior Comfort

Audio System

When the seek tuning button ( ) is

pressed (about 1.5 seconds), playback

starts from the beginning of the next

program. When the seek tuning button

(If the SIRIUS ID (ESN) for the tuner

does not display)

If “ESN

FAIL” is displayed after

pressing the ESN button for 1.5 seconds

or longer, contact an Authorized Mazda

Dealer.

(

) is pressed (about 1.5 seconds) while

the last program is being played, the

instant replay mode is cancelled.

When the seek tuning button ( ) is

pressed for 1.5 seconds or longer, the

program is fast-forwarded while the

button is being pressed. When pressing

and holding the button until the end of the

program, the instant replay mode is

cancelled.

Initialization of ID code

If the registered ID code is forgotten,

return the ID code to the default [0000] by

performing the following steps:

Setting condition: SAT mode

(Master code input preparation)

When the instant replay button is pressed

again, playback is paused, or playback

starts if it has been paused.

1. Press and hold the scan button, then

press channel preset button 4. Hold

both buttons together for 1.5 seconds.

Instant replay (PAUSE)

If the instant replay button is pressed

while the instant replay mode is off,

instant replay mode is turned on in a

paused condition (PAUSE). Press the

instant replay button again to resume

playback from the point at which it was

paused.

2. “ENTER PIN” appears for three

seconds which indicates that it is in

code input mode.

3. “SR1 - - - -” appears, which indicates

that it is ready for code input.

(Master code input)

NOTE

4. Input the master code using the channel

preset buttons 1-4.

l

If the channel is changed, the instant replay

buffer data is deleted.

(The master code is already set at the

time of factory shipment.)

l

After turning on the power and switching to

SIRIUS digital satellite radio mode, the

instant replay mode is not available for

several seconds after changing channels.

(Master code input determination)

5. Determine the master code which has

been input by pressing the scan button.

Displaying the SIRIUS ID (ESN)

6. “PIN CLEARED” appears which

indicates that the master code input has

been completed.

When the ESN button is pressed for 1.5

seconds or longer, a 12-digit Electronic

Serial Number (ESN) for the SIRIUS

tuner is displayed.

7. The ID code is set to the default [0000]

and the initialization process is

completed.

6-41

Interior Comfort

Audio System

NOTE

Master code:

4. Input the registered ID code using

channel preset buttons 1-4.

The Master Code is used to initialize or re-

initialize the ID code in the event that the code

is not set to [0000] and/or the personalized ID

code is not known. The initialization process

resets the ID code to [0000]. The master code

can potentially defeat the intent of the security

of the parental lock if it is located by persons

not authorized by the owner to access certain

channels.

Example: When the registered ID code

is “2323”, input “2323”. At this time

“SR1 2323” is displayed.

Press 1 for the first digit, 2 for the

second, 3 for the third, and 4 for the

last digit. For example, if your number

is 2323, press 1 three times (includes

0), 2 four times, 3 three times, and 4

four times. If the display goes off while

inputting, begin from Step 1.

SIRIUS Satellite Radio Master Code: [0913]

NOTE

The registered ID code is the default [0000] at

the time of factory shipment. If [0000] results

in “Err” on the display, go to the

“INITIALIZATION OF ID CODE” section to

reset to [0000].

NOTE

l

When a numeric value other than the

master code is input and the scan button is

pressed, “SR1 Err” is displayed and then it

returns to the “SR1 - - - -” display again.

l

If an ID code is not input for ten seconds,

(Verification with the registered ID

code)

“Err” is displayed and it returns to the

former display.

l

Channel preset buttons 1, 2, 3, 4 and the

scan button are used for inputting the ID

code. Buttons 5 and 6 cannot be used.

5. Determine the input code by pressing

the scan button.

6. If it does not match with the previously

registered code, “SR1 Err” is displayed

and then it returns to “SR1 - - - -”.

Change of ID code

Setting condition: SAT mode

When changing the ID code, the new ID

code is input after the previous one is

input first.

7. If it matches with the previously

registered code, “ENTER PIN” appears

again and it switches to code input

mode.

(Registered ID code input)

8. “SR1 - - - -” appears, and it is ready for

1. Press and hold the scan button, then

press channel preset button 5. Hold

both buttons together for 1.5 seconds.

input of the new ID code.

(New ID code input)

9. Input the new ID code using channel

preset buttons 1-4.

2. “ENTER PIN” appears for three

seconds which indicates that it is in

code input mode.

Example: If “1234” is input as the new

code, “SR1 1234” is displayed.

3. “SR1 - - - -” appears, which indicates

that it is ready for code input.

6-42

Interior Comfort

Audio System

(New ID code input determination)

(Registered ID code input)

10. Determine the new ID code which

has been input by pressing the scan

button.

5. Input the registered ID code using

channel preset buttons 1-4. Example: If

the registered ID code is “2323”, input

“2323”. At this time “SR1 2323” is

displayed.

11. “PIN CHANGED” appears for three

seconds which indicates that the new

ID code input has been completed.

(Registered ID code input

determination)

12. It returns to the former display.

6. Determine the code which has been

input by pressing the scan button.

NOTE

l

If an ID code is not input for ten seconds,

“Err” is displayed and it returns to the

former display.

Channel preset buttons 1, 2, 3, 4 and the

7. If it does not match the registered code,

“SR1 Err” is displayed and then it

returns to “SR1 - - - -”.

l

scan button are used for input of the ID

code. Buttons 5 and 6 cannot be used.

8. If it matches the registered code,

“SR1 LOCK” appears for three

seconds which indicates that the code

input has been completed.

Individual channel locking

If a channel is locked, the channel is

muted.

9. “SR1 LOCK 100” appears which

indicates that the parental lock is

activated. At this time, mute is on and

no sound is heard.

NOTE

If the registered ID code is forgotten, return

the ID code to the default [0000]. (See

“INTIALIZATION OF ID CODE” section)

NOTE

l

If an ID code is not input for ten seconds,

(Locking a channel)

“Err” is displayed and it returns to the

former display.

Channel preset buttons 1, 2, 3, 4 and the

scan button are used for input of the ID

code. Buttons 5 and 6 cannot be used.

1. Select a channel to be locked by

turning the manual tuning dial.

Example: Select channel 100

l

(Registered ID code input preparation)

Lock cancellation

2. Press and hold the scan button, then

press channel preset button 6. Hold

both buttons together for 1.5 seconds.

Setting condition: SAT mode

(Releasing a locked channel)

3. “ENTER PIN” appears for three

seconds which indicates that it is in

code input mode.

1. Select a channel to be released by

turning the manual tuning dial.

Example: Select the locked channel

(i.e. 100). At this time,

4. “SR1 - - - -” appears which indicates

that it is ready for code input.

“SR1 LOCK 100” is displayed.

6-43

Interior Comfort

Audio System

(Registered ID code input preparation)

NOTE

l

If an ID code is not input for ten seconds,

“Err” is displayed and it returns to the

former display.

Channel preset buttons 1, 2, 3, 4 and the

scan button are used for input of the ID

code. Buttons 5 and 6 cannot be used.

2. Press and hold the scan button, then

press channel preset button 6. Hold

both buttons together for 1.5 seconds.

l

3. “ENTER PIN” appears for three

seconds which indicates that it is in

code input mode.

4. “SR1 - - - -” appears, which indicates

that it is ready for code input.

(Registered ID code input)

5. Input the registered ID code using

channel preset buttons 1-4. Example:

When the registered ID code is “2323”,

input “2323”. At this time “SR1 2323”

is displayed.

NOTE

If “Err” is displayed, go to the

“INITIALIZATION OF ID CODE” section to

reset the ID code to [0000].

(Registered ID code input

determination)

6. Determine the input code by pressing

the scan button.

7. If it does not match the registered code,

“SR1 Err” is displayed and then it

returns to “SR1 - - - -”.

8. If it matches the registered code,

“SR1 UNLOCK” appears for three

seconds which indicates that the code

input has been completed.

9. “SR1 100” appears which indicates that

the parental lock is off. At this time,

sound is heard.

6-44

MEMO

6-45

Interior Comfort

Audio System

qOperating the Compact Disc (CD) Player

CD slot

CD play button

Folder up button

CD eject button

Display

Repeat button

Play/Pause button

Scan button

Folder down button

Text button

Load button

Track down/Reverse button

Track up/Fast-forward button

Random button

Type

Playable data

Ejecting the CD

l

Music/MP3/WMA CD

player

Music data (CD-DA)

MP3/WMA file

Press the CD eject button ( ) to eject the

CD.

l

NOTE

Playback

If a disc has both music data (CD-DA) and

MP3/WMA files, playback of the two or three

file types differs depending on how the disc

was recorded.

Press the CD play button ( ) to start

play when a CD is in the unit.

If a CD is not in the unit when the CD

play button ( ) is pressed, “NO DISC”

will flash on and off.

Inserting the CD

Insert the CD into the slot, label-side up.

The auto-loading mechanism will set the

CD and begin play.

NOTE

When the load button (

CD will load and play even if the CD eject

button ( ) had been previously pressed.

) is pressed, the

NOTE

There will be a short lapse before play begins

while the player reads the digital signals on

the CD.

Pause

To stop playback, press the Play/Pause

button ( ).

Press the button again to resume

playback.

6-46

Interior Comfort

Audio System

Fast-forward/Reverse

Repeat playback

Press and hold the fast-forward button

During music CD playback

(

) to advance through a track at high

1. Press the repeat button (

) during

speed.

playback to play the current track

repeatedly. “RPT” is displayed.

Press and hold the reverse button ( ) to

reverse through a track at high speed.

2. Press the button again to cancel the

repeat playback.

Track search

Press the track up button ( ) once to skip

forward to the beginning of the next track.

Press the track down button ( ) once to

skip back to the beginning of the current

track.

During MP3/WMA CD playback

(Track repeat)

1. Press the repeat button (

) during

playback to play the current track

repeatedly. After “TRACK RPT” is

displayed, “RPT” is displayed.

Folder search (during MP3/WMA CD

playback)

To change to the previous folder, press the

2. To cancel the repeat playback, press the

button again after 3 seconds.

folder down button (

folder up button (

next folder.

), or press the

) to advance to the

(Folder repeat)

Music scan

1. Press the repeat button (

) during

playback, and then press the button

again within 3 seconds to play the

tracks in the current folder repeatedly.

After “FOLDER RPT” is displayed,

“F-RPT” is displayed.

During music CD playback

This function scans the titles on a CD and

plays 10 seconds of each song to aid you

in finding a song you want to listen to.

During MP3/WMA CD playback

2. Press the button again to cancel the

repeat playback.

This function scans the titles in a folder

currently being played and plays 10

seconds of each song to aid you in finding

a song you want to listen to.

Random playback

Tracks are randomly selected and played.

During music CD playback

Press the scan button (

playback to start the scan play operation

(the track number will flash).

Press the scan button (

cancel scan playback.

) during

1. Press the random button (

) during

playback to play the tracks on the CD

randomly. “RDM” is displayed.

) again to

2. Press the button again to cancel the

random playback.

NOTE

If the unit is left in scan, normal playback will

resume where scan was selected.

6-47

Interior Comfort

Audio System

During MP3/WMA CD playback

(Folder random)

MP3/WMA CD

File number/Elapsed time

1. Press the random button (

) during

playback to play the tracks in the folder

randomly. After “FOLDER RDM” is

displayed, “RDM” is displayed.

Folder number/File number

File name

2. To cancel the random playback, press

the button again after 3 seconds.

(CD random)

Folder name

1. Press the random button (

) during

playback, and then press the button

again within 3 seconds to play the

tracks on the CD randomly. After

“DISC RDM” is displayed, “D-RDM”

is displayed.

Album name (ID3 Tag)

Song name (ID3 Tag)

Artist name (ID3 Tag)

2. Press the button again to cancel the

random playback.

Switching the display

For files with a file name and other

information that have been input, the

display switches between display of the

file name and other information each time

NOTE

(MP3/WMA CD)

l

The information viewable in the display is

only CD information (such as artist name,

song title) which has been recorded to the

CD.

the text button (

playback.

) is pressed during

Music CD

l

The system can only display one-byte

alphabetic characters. If two-byte or other

types of characters have been recorded to

the CD, they may not display correctly.

Track number/Elapsed time

Track name

Album name

Artist name

Display scroll

Only 13 characters can be displayed at

one time. To display the rest of the

characters of a long title, press and hold

the text button (

scrolls the next 13 characters. Press and

hold the text button ( ) again after

). The display

the last 13 characters have been displayed

to return to the beginning of the title.

6-48

Interior Comfort

Audio System

NOTE

The displayable number of characters is

limited. If the number of characters, including

the file extension (.mp3/.wma), exceeds 32

characters, it may not be fully displayed.

Message display

If “CHECK CD” is displayed, it means

that there is some CD malfunction. Check

the CD for damage, dirt, or smudges, and

then properly reinsert. If the message

appears again, take the unit to an

Authorized Mazda Dealer for service.

6-49

Interior Comfort

Audio System

qOperating the In-Dash CD Changer

Channel preset buttons

Load button

CD slot

CD play button

Display

Repeat button

CD eject button

Disc up/Folder up button

Text button

Play/Pause button

Track up/Fast-forward button

Random button

Channel

preset buttons

Scan button

Track down/Reverse button

Disc down/Folder down button

Type

Playable data

NOTE

l

The CD will begin playback automatically

after insertion.

Music/MP3/WMA CD

player

Music data (CD-DA)

MP3/WMA file

l

A CD cannot be inserted while the display

reads “WAIT”. A beeping sound can be heard

during this waiting time.

There will be a short lapse before play begins

while the player reads the digital signals on

the CD.

NOTE

If a disc has both music data (CD-DA) and

MP3/WMA files, playback of the two or three

file types differs depending on how the disc

was recorded.

Inserting the CD

Normal insertion

The CD must be label-side up when

inserting. The auto-loading mechanism

will set the CD and begin play.

1. Press the load button (

).

2. When “IN” is displayed, insert the CD.

Inserting CDs into desired tray number

1. Press and hold the load button (

)

for about 2 seconds until a beep sound

is heard.

6-50

Interior Comfort

Audio System

2. Press the channel preset button for the

desired tray number while “WAIT” is

displayed.

2. Press the channel preset button for the

desired CD number for less than 5

seconds after the beep sound is heard.

3. When “IN” is displayed, insert the CD.

3. Pull out the CD.

NOTE

Multiple ejection

The CD cannot be inserted to the desired tray

number if the number is already occupied.

1. Press and hold the CD eject button (

for about 2 seconds until a beep sound

is heard.

)

Multiple insertion

The “DISC OUT” display flashes.

1. Press and hold the load button (

)

2. Pull out the CD, then the next CD will

be ejected.

for about 2 seconds until a beep sound

is heard.

NOTE

l

2. When “IN” is displayed, insert the CD.

CDs will be ejected starting with the one

with the lowest number.

All CDs in the tray will be ejected

3. When “IN” is displayed again, insert

the next CD.

l

continuously.

CDs can be ejected when the ignition

switch is off. Press and hold the CD eject

button ( ) for about 2 seconds and all

CDs will eject.

NOTE

l

The first-inserted CD will be played

automatically when:

l

No other CD is inserted within 15 seconds

after “IN” is displayed.

l

The CD trays are full.

Playback

Ejecting the CD

Normal ejection

Press the CD play button ( ) to start

play when a CD is in the unit.

If a CD is not in the unit when the CD

play button ( ) is pressed, “NO DISC”

will flash on and off.

1. Press the CD eject button ( ). The

disc number and “DISC OUT” will be

displayed.

Pause

2. Pull out the CD.

To stop playback, press the Play/Pause

button ( ).

Press the button again to resume

playback.

NOTE

When the CD is ejected during play, the next

CD will be played automatically.

Fast-forward/Reverse

Ejecting CDs from desired tray number

Press and hold the fast-forward button

1. Press and hold the CD eject button (

for about 2 seconds until a beep sound

is heard.

)

(

) to advance through a track at high

speed.

Press and hold the reverse button ( ) to

reverse through a track at high speed.

The “DISC OUT” display flashes.

6-51

Interior Comfort

Audio System

Track search

NOTE

If the unit is left in scan, normal playback will

resume where scan was selected.

Press the track up button ( ) once to skip

forward to the beginning of the next track.

Press the track down button ( ) once to

skip back to the beginning of the current

track.

Repeat playback

During music CD playback

1. Press the repeat button (

) during

Disc search

playback to play the current track

repeatedly. “RPT” is displayed.

During music CD playback

To change the disc, press the DISC button

2. Press the button again to cancel the

repeat playback.

(

or

) during playback.

During MP3/WMA CD playback

(Track repeat)

To change the disc, press the DISC button

(

or

) for 1.5 seconds or more

during playback.

1. Press the repeat button (

) during

playback to play the current track

repeatedly. After “TRACK RPT” is

displayed, “RPT” is displayed.

Folder search (during MP3/WMA CD

playback)

To change to the previous folder, press the

2. To cancel the repeat playback, press the

button again after 3 seconds.

folder down button (

seconds, or press the folder up button

) for less than 1.5 seconds to advance

) for less than 1.5

(

(Folder repeat)

to the next folder.

1. Press the repeat button (

) during

Music scan

playback, and then press the button

again within 3 seconds to play the

tracks in the current folder repeatedly.

After “FOLDER RPT” is displayed,

“F-RPT” is displayed.

During music CD playback

This function scans the titles on a CD and

plays 10 seconds of each song to aid you

in finding a song you want to listen to.

2. Press the button again to cancel the

repeat playback.

During MP3/WMA CD playback

This function scans the titles in a folder

currently being played and plays 10

seconds of each song to aid you in finding

a song you want to listen to.

Random playback

Tracks are randomly selected and played.

During music CD playback

Press the scan button (

playback to start the scan play operation

(the track number will flash).

Press the scan button (

cancel scan playback.

) during

1. Press the random button (

) during

playback to play the tracks in the CD

randomly. “RDM” is displayed.

) again to

2. Press the button again to cancel the

random playback.

6-52

Interior Comfort

Audio System

During MP3/WMA CD playback

(Folder random)

MP3/WMA CD

Disc number/File

number/Elapsed time

1. Press the random button (

) during

playback to play the tracks in the folder

randomly. After “FOLDER RDM” is

displayed, “RDM” is displayed.

Disc number/Folder

number/File number

2. To cancel the random playback, press

the button again after 3 seconds.

File name

(CD random)

1. Press the random button (

) during

Folder name

playback, and then press the button

again within 3 seconds to play the

tracks on the CD randomly. After

“DISC RDM” is displayed, “D-RDM”

is displayed.

Album name (ID3 Tag)

Song name (ID3 Tag)

Artist name (ID3 Tag)

2. Press the button again to cancel the

random playback.

Switching the display

For files with a file name and other

information that have been input, the

display switches between display of the

file name and other information each time

NOTE

(MP3/WMA CD)

l

The information viewable in the display is

only CD information (such as artist name,

song title) which has been recorded to the

CD.

the text button (

playback.

) is pressed during

Music CD

l

The system can only display one-byte

alphabetic characters. If two-byte or other

types of characters have been recorded to

the CD, they may not display correctly.

Disc number/Track

number/Elapsed time

Display scroll

Track name

Only 13 characters can be displayed at

one time. To display the rest of the

characters of a long title, press and hold

Album name

the text button (

scrolls the next 13 characters. Press and

hold the text button ( ) again after

). The display

Artist name

the last 13 characters have been displayed

to return to the beginning of the title.

6-53

Interior Comfort

Audio System

NOTE

The displayable number of characters is

limited. If the number of characters, including

the file extension (.mp3/.wma), exceeds 32

characters, it may not be fully displayed.

Message display

If “CHECK CD” is displayed, it means

that there is some CD malfunction. Check

the CD for damage, dirt, or smudges, and

then properly reinsert. If the message

appears again, take the unit to an

Authorized Mazda Dealer for service.

qOperating the Auxiliary jack

You can connect portable audio units or

similar products on the market to the

auxiliary jack to listen to music or audio

over the vehicle's speakers.

NOTE

If the ignition switch is turned to the LOCK

position with the audio muted, the mute will be

canceled.

Therefore, when the engine is restarted, the

audio is not muted. To mute the audio again,

press the mute switch ( ).

Auxiliary jack

WARNING

Do not adjust the portable audio unit

or a similar product while driving the

vehicle:

Adjusting the portable audio unit or

a similar product while driving the

vehicle is dangerous as it could

distract your attention from the

vehicle operation which could lead to

a serious accident. Always adjust the

portable audio unit or a similar

product while the vehicle is stopped.

Do not allow the connection plug cord

to get tangled with the parking brake

or the shift lever:

Allowing the plug cord to become

tangled with the parking brake or

the shift lever is dangerous as it

could interfere with driving, resulting

in an accident.

6-58

^íSome models.

Interior Comfort

Audio System

4. Press the AUX button (

audio unit or the mode switch (

of the audio control switches on the

) of the

CAUTION

)

Noise may occur during playback if

the accessory socket equipped on the

vehicle is used. (If noise occurs, do

not use the accessory socket.)

steering wheel to change to the AUX

mode.

Audio Unit

Audio Control

Switches

NOTE

l

Before using the auxiliary jack, read the

manufacturer's instructions for the product

being connected.

l

Use a commercially-available, non-

impedance (3.5 ) stereo mini plug for

connecting the portable audio unit to the

auxiliary jack. Before using the auxiliary

jack, read the manufacture's instructions

for connecting a portable audio unit to the

auxiliary jack.

NOTE

l

To prevent discharging of the battery, do

not use the auxiliary input for long periods

with the engine off or idling.

Set the volume of the portable audio unit to

the maximum within the range that the

sound does not become distorted, then

adjust the volume using the power/volume

dial of the audio unit or the volume switch

l

Noise may occur depending on the product

connected to the auxiliary jack.

With regard to connecting a portable audio

or similar device to a power source, use the

battery for the device, not the accessory

socket.

Insert the plug to the auxiliary jack

securely.

Insert or remove the plug with the plug

perpendicular to the auxiliary jack hole.

Insert or remove the plug by holding its

base.

(

,

) of the audio control switch.

l

Use your portable audio unit for operations

other than volume adjustment.

If the connection plug is pulled out from the

auxiliary jack while in AUX mode, noise

may occur.

l

To listen to a portable audio unit

1. Turn the ignition switch to the ACC or

ON position.

2. Insert the connection plug into the

auxiliary jack.

3. Press the power/volume dial to turn the

audio system on.

6-59

Interior Comfort

Audio System

Safety Certification

This CD player is made and tested to meet exacting safety standards. It meets FCC

requirements and complies with safety performance standards of the U.S. Department of

Health and Human Services.

CAUTION

Ø This CD player should not be adjusted or repaired by anyone except qualified

service personnel.

If servicing is required, contact an Authorized Mazda Dealer.

Ø Use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous laser exposure. Never operate the CD

player with the top case of the unit removed.

Ø Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

NOTE

For CD player section:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation.

6-60

Interior Comfort

Bluetooth Hands-Free

Bluetooth Hands-Free^í

CAUTION

The types of mobile phones which

can be connected to the hands-free

unit are limited, so before purchasing

or changing your mobile phone

model, consult Mazda Bluetooth

Hands-Free Customer Service or visit

www.MazdaUSA.com/bluetooth for a

complete list of compatible phones.

Mobile phones which can be

qWhat is Bluetooth Hands-Free?

Bluetooth Hands-Free Outline

By connecting a Bluetooth equipped

mobile telephone to the hands-free unit

equipped on the vehicle, making and

receiving calls are possible using the

voice recognition/hands-free switch

located on the steering wheel, and saying

the voice commands.

connected to the hands-free system

need to be compliant with Bluetooth

specifications and the appropriate

profile, however, even among these

Bluetooth phones are some which

will not connect with your Mazda or

will have limited function. Therefore,

consult Mazda Bluetooth Hands-Free

Customer Service for information

regarding mobile phone

WARNING

Perform phonebook registration related

operations while the vehicle is parked:

Performing phonebook registration

while driving the vehicle could be a

distraction to your driving and result

in an unexpected accident. In

addition, a mistake in performing the

phonebook operation could result in

the loss of important data.

compatibility:

Phone: 800-430-0153

Web: www.MazdaUSA.com/

bluetooth

Bluetooth equipped mobile telephone

Applicable Bluetooth specification

Ver. 1.1 or higher

Response profile

A Bluetooth equipped mobile telephone

communicates with the hands-free unit

equipped on the vehicle using radio

transmission (Bluetooth).

For example, if the mobile telephone is

placed in a coat pocket, the phone calls

can be made through your mobile service

without taking out and handling the

mobile telephone.

l

HFP (Hands Free Profile) Ver. 1.0

DUN (Dial-up Networking Profile)

l

Ver. 1.1

Bluetooth is the registered trademark of

Bluetooth SIG. Inc.

^íSome models.

6-61

Interior Comfort

Bluetooth Hands-Free

NOTE

Voice Recognition/Hands-Free switch

operations

l

The Bluetooth Hands-Free system is

operable several seconds after turning the

ignition switch to the ACC or ON position

(requires less than 15 seconds).

If the ignition switch is turned off during a

hands-free call, the line is transferred to the

mobile telephone automatically.

A short press or a long press of the voice

recognition/hands-free switch is used to

operate the system as follows:

l

Short press (Press the button less than

0.7 sec.)

l

Long press (Press the button 0.7 sec. or

l

If the mobile telephone is in a location

more.)

where radio reception is difficult such as a

metal container or in the trunk, the call may

not be connected using Bluetooth. If

communication is not possible, change the

location of the mobile telephone.

Information display

When available, the information display

shows telephone numbers, Bluetooth

Hands-Free messages, and operation

status.

qComponent parts

Bluetooth Hands-Free consists of the

following items:

l

Voice Recognition/Hands-Free switch

Information display

Microphone

Audio unit

l

Voice Recognition/Hands-Free switch

Bluetooth phone connected

Basic functions of Bluetooth Hands-Free

can be used for such things as making

calls or hanging up using the voice

recognition/hands-free switch on the

steering wheel.

Microphone

The microphone is used for speaking

voice commands or exchanging

conversation.

Microphone

Voice recognition/hands-free switch

6-62

Interior Comfort

Bluetooth Hands-Free

l

Audio unit

Dialects or different wording other than

hands-free prompts cannot be

recognized by voice recognition. Speak

in the wording specified by the voice

commands.

The audio unit is used for adjusting the

volume.

qVoice

NOTE

To prevent the deterioration in voice

recognition rate and voice quality, the

following points must be observed:

If the voice recognition performance is not

satisfactory, refer to “Voice Recognition

Learning Function (Speaker Enrollment)”

(page 6-76).

l

It is not necessary to face the

microphone or approach it. Speak the

voice commands while maintaining a

safe driving position.

Please be aware that the voice recognition

may error despite following the above

points.

l

Close the windows and/or the

moonroof to reduce loud noises from

outside the vehicle, or turn down the

airflow of the climate control system

while Bluetooth Hands-Free is being

used. Voice recognition may not

function correctly or voice quality may

deteriorate under the following

conditions.

qFunction restrictions while using

Bluetooth Hands-Free

Some functions are limited while

Bluetooth Hands-Free is being used. They

include:

l

Beep sound and voice guidance related

l

A passenger is speaking.

to the audio unit are not heard.

Beep sound related to the A/C

l

Driving with the window and/or the

moonroof open.

Driving on bumpy roads.

Noise outside of the vehicle is loud.

(Construction sites, inside tunnels,

excess oncoming traffic, or heavy

rain.)

Operation noise from turn signals,

wipers, or the horn is heard.

operation is not heard.

l

qHow to use this section

Descriptions in the text are as follows:

Say: Voice commands to be spoken by

you.

Prompt: Voice guidance output from the

speaker.

l

A/C airflow is strong or wind is

blowing on the microphone.

There is noise coming from cargo

loaded in the vehicle.

NOTE

l

Say voice commands after the beep sound

[Beep] is heard.

l

Voice commands may not be

recognized depending on the voice. If

the voice commands are not recognized

correctly, repeat the commands in a

louder voice, at a natural pace, as if

speaking to another person.

Example)

Say: [Beep] “Dial”

Prompt: “Number, please”

Say: [Beep] “XXXXXXXXXXX (Ex.

“555-1234”) (Telephone number)”

6-63

Interior Comfort

Bluetooth Hands-Free

Bluetooth Hands-Free Activation

Method

Basic Bluetooth Hands-

Free Operation

1. Program the mobile telephone (Pairing)

Refer to Bluetooth Hands-Free

preparation on page 6-64.

q

Bluetooth Hands-Free preparation

Language setting

2. Press the voice recognition/hands-free

switch with a short press.

The available languages are English,

Spanish, and Canadian French. If the

language setting is changed, all of the

voice guidance and voice input

commands are done in the selected

language.

The hands-free system is activated.

Functions of the hands-free telephone,

such as making and receiving calls, can be

used after the activation. (For details on

the telephone functions, refer to “Basic

Bluetooth Hands-Free Operation” or

“Convenient Use of the Hands-Free

System”.)

NOTE

l

If the language setting is changed, phone

registration is maintained.

Phonebook records are not cleared, but

each language has a separate phonebook.

Therefore, entries created in one language

will need to be re-entered in the phonebook

of the new language.

l

Do these steps before you start driving.

These less used functions are too

distracting to undertake while driving until

you are fully familiar with the system.

Method 1

1. Press the voice recognition/hands-free

switch with a short press.

2. Say: [Beep] “Setup”

3. Prompt: “Select one of the following:

Pairing options, confirmation prompts,

select phone, language, or passcode, or

say “cancel” to return to the main

menu.”

4. Say: [Beep] “Language”

5. Prompt: “Select a language: English,

French, or Spanish.”

6. Say: [Beep] “French” (Speak the

desired language: “English”, “French”

or “Spanish”)

6-64

Interior Comfort

Bluetooth Hands-Free

NOTE

Up to seven Bluetooth equipped mobile

telephones can be programmed to the

vehicle.

Other language settings can also be made

while in the current setting by saying the name

of the language in the native pronunciation.

NOTE

l

A mobile telephone can be programmed

7. Prompt: “French (Desired language)

selected. Is this correct?”

only when the vehicle is parked. If the

vehicle starts to move, the pairing

procedure will end. Programming is

dangerous while driving - pair up your

device before you start driving. Park the

car in a safe place before programming.

8. Say: [Beep] “Yes”

9. Prompt: “French (Desired language)

selected, returning to main menu”

(Spoken in the newly selected

language).

l

Since the communication range of a

Bluetooth equipped mobile telephone is

about 10 meters (32 ft), if a mobile

Method 2

telephone is placed within a 10-meter (32

ft) radius of the vehicle, it may be detected/

programmed unintentionally while another

telephone is being programmed.

1. Press the voice recognition/hands-free

switch with a short press.

2. Say: [Beep] “French” (Say the desired

language: “English”, “French”, or

“Spanish”.)

1. Activate the Bluetooth application of

the mobile telephone.

NOTE

Other language settings can also be made

while in the current setting by saying the name

of the language in the native pronunciation.

For the operation of the mobile telephone,

refer to its instruction manual.

2. Press the voice recognition/hands-free

switch with a short press.

3. Prompt: “Would you like to change

the language to French (Desired

language) ?”

3. Say: [Beep] “Setup”

4. Say: [Beep] “Yes”

4. Prompt: “Select one of the following:

Pairing options, confirmation prompts,

select phone, language, or passcode, or

say “cancel” to return to the main

menu.”

5. Prompt: “Please wait. Switching to

French phone book. French selected,

returning to main menu” (Spoken in

the newly selected language).

5. Say: [Beep] “Pairing options”

Mobile telephone programming

(Pairing)

6. Prompt: “Do you want to pair a

phone, delete a phone, or list paired

phones?”

To use Bluetooth Hands-Free, a mobile

phone equipped with Bluetooth has to be

programmed to the hands-free unit using

the following procedure.

7. Say: [Beep] “Pair a phone”

8. Prompt: “Please say a 4-digit pairing

code.”

6-65

Interior Comfort

Bluetooth Hands-Free

9. Say: [Beep] “XXXX” (Speak an

arbitrary 4-digit pairing code. This can

be any combination of 4 numbers.)

NOTE

Speak a programmed “phone tag” within 10

seconds.

If more than two mobile telephones are to be

programmed, they cannot be programmed with

the same or similar “phone tag”.

NOTE

l

Some devices accept only a particular

pairing code (Usually, “0000” or “1234”).

If pairing cannot be completed, refer to the

owner's manual of your mobile device, and

try those numbers if necessary.

19. Prompt: “Adding XXXXXX - - -

(Ex. “Stan's phone”) (Phone tag). Is

this correct?”

l

Record the code as it will be used to

20. Say: [Beep] “Yes”

program your phone in Step 16.

21. Prompt: “Assign a priority for this

phone between 1 and 7, where 1 is

the phone used most often.”

10. Prompt: “Pairing code XXXX (4-

digit number). Is this correct?”

11. Say: [Beep] “Yes” or “No”

22. Say: [Beep] “1” (Speak a number of

12. If “Yes”, go to Step 13.

the desired priority from 1 to 7.)

If “No”, the procedure returns to Step

8.

NOTE

l

Normally, “1” is to be input (Highest

13. Prompt: “Start pairing procedure on

phone. See phone's manual for

instructions.”

priority).

l

If more than two mobile telephones are

registered, input the priority order from 1 to

7.

14. Using the mobile telephone, perform

a search for the Bluetooth device

(Peripheral device).

23. Prompt: “XXXXXX - - - (Ex.

“Stan's phone”) (Phone tag) set to

priority X (Priority number). Is this

correct?”

NOTE

For the operation of the mobile telephone,

refer to its instruction manual.

24. Say: [Beep] “Yes”

15. Select “Mazda” from the device list

25. Prompt: “Pairing complete”

searched by the mobile phone.

After a mobile telephone is registered, the

system automatically identifies the phone.

By pressing the voice recognition/hands-

free switch again, or by pressing the voice

recognition/hands-free switch first after

turning the ignition switch from the

LOCK to the ACC position, the system

reads out a voice guidance, “XXXXXX -

- - (Ex. “Stan's phone”) (Phone tag) is

connected”. If two or more telephones are

registered, the one with the highest

priority is selected.

16. Input the 4-digit pairing code set in

Step 9 to the mobile telephone.

17. Prompt: “Please say the name of the

phone after the beep.”

18. Say: [Beep] “XXXX - - -” (Speak a

“phone tag”, an arbitrary name for the

phone.)

Example: “Stan's phone.”

6-66

Interior Comfort

Bluetooth Hands-Free

NOTE

qReceiving an incoming call

Depending on the device, the registration

status may be lost after a certain period of

time. If this occurs, repeat the entire process

from Step 1.

1. Prompt: “Incoming call, press the

phone button to answer”.

2. To accept the call, press the voice

recognition/hands-free switch with a

short press.

qMaking a call using a telephone

To reject the call, press the voice

recognition/hands-free switch with a

long press.

number

NOTE

Practice this while parked until you are

confident you can do it while driving in a non-

taxing road situation. If you are not completely

comfortable, make all calls from a safe

parking position, and move out only when fully

under control and you can devote your eyes

and mind to driving.

qHanging up a call

Press the voice recognition/hands-free

switch during the call with a long press.

A beep sound will confirm that call is

ended.

1. Press the voice recognition/hands-free

switch with a short press.

qVolume adjustment

The power/volume dial of the audio unit

is used to adjust the volume. Turn the dial

to the right to increase volume, to the left

to decrease it.

2. Say: [Beep] “Dial”

3. Prompt: “Number, please”

4. Say: [Beep] “XXXXXXXXXXX (Ex.

“555-1234”) (Telephone number)”

5. Prompt: “Dialing XXXXXXXXXXX

(Ex. “555-1234”) (Telephone number)

is this correct?”

6. Say: [Beep] “Yes” or “No”.

7. When “Yes” is spoken, the call is

made.

When “No” is spoken, the procedure

returns to Step 3.

NOTE

l

The “Dial” command and a telephone number

The volume can also be adjusted using the

volume button on the steering wheel.

The music volume of the audio unit cannot

be adjusted while Bluetooth Hands-Free is

being used.

can be combined.

Ex. In Step 2, say, “Dial 123-4567”, then,

Steps 3 and 4 can be skipped.

l

6-67

Interior Comfort

Bluetooth Hands-Free

qHelp function use

Convenient Use of the

Hands-Free System

The help function informs the user of all

the available voice commands under the

current conditions.

qPhone book usage

1. Press the voice recognition/hands-free

switch with a short press.

Phone book registration

Phone numbers can be registered to the

Bluetooth Hands-Free phone book.

2. Say: [Beep] “Help”

3. Follow the prompts to receive the

appropriate voice guidance

instructions.

NOTE

Do this function only when parked. It is too

distracting to attempt while driving and you

may make too many errors to be effective.

1. Press the voice recognition/hands-free

switch with a short press.

2. Say: [Beep] “Phone book”

3. Prompt: “Select one of the following:

new entry, edit, list names, delete or

erase all..., or say “cancel” to return to

main menu.”

4. Say: [Beep] “New entry”

5. Prompt: “Name please.”

6. Say: [Beep] “XXXXX... (Ex. “Mary's

phone”)” (Say a voice tag for the name

registered.)

7. Prompt: “Adding XXXXX... (Ex.

“Mary's phone”) (Registered voice

tag). Is this correct?”

8. Say: [Beep] “Yes”

9. Prompt: “Home, Work, Mobile, or

Pager?”

10. Say: [Beep] “Mobile” (Say “Home”,

“Work”, “Mobile”, or “Pager”, for the

desired location to be registered.)

11. Prompt: “Mobile” (Location to be

registered). Is this correct?

12. Say: [Beep] “Yes”

6-68

Interior Comfort

Bluetooth Hands-Free

13. Prompt: “Number, please.”

6. Say: [Beep] “Yes”

14. Say: [Beep] “XXXXXXXXXXX

(Ex. “555-1234”)” (Say the phone

number to be registered.)

7. Prompt: “Dialing”

NOTE

The “Call” command and the voice tag can be

15. Prompt: “XXXXXXXXXXX (Ex.

“555-1234”) (Phone number

combined.

Ex. In Step 2, say, “Call John's phone”, then,

Steps 3 and 4 can be skipped.

registration). Is this correct? ”

16. Say: [Beep] “Yes”

qRedialing function

17. Prompt: “Number saved. Would you

like to add another number for this

entry?”

Redialing the number of the person

previously dialed using the phone is

possible.

18. Say: [Beep] “Yes” or “No”.

1. Press the voice recognition/hands-free

switch with a short press.

19. If “Yes”, an additional phone number

registration can be made for the same

entry.

2. Say: [Beep] “Redial”

3. Prompt: “Dialing”

If “No”, the procedure proceeds to

Step 20.

qEmergency calls

20. Prompt: “Returning to main menu.”

A call can be made to the emergency

phone number (911) using the voice input

command.

Making calls using the phone book

Telephone calls can be made by saying

the name of a person (voice tag) whose

phone number has been registered in

Bluetooth Hands-Free in advance.

For the phone book setting method, refer

to (page 6-70).

1. Press the voice recognition/hands-free

switch with a short press.

2. Say: [Beep] “Emergency”

3. Prompt: “Calling “911”, is this

correct?”

1. Press the voice recognition/hands-free

switch with a short press.

4. Say: [Beep] “Yes”

5. Prompt: “Dialing”

2. Say: [Beep] “Call”

3. Prompt: “Name please.”

4. Say: [Beep] “XXXXX... (Ex. “John's

phone”)” (Say a voice tag registered in

the phone book.)

qRefusing an incoming call

For incoming call refusal, refer to

“Receiving an incoming call” (page 6-67).

5. Prompt: “Calling XXXXX... (Ex.

“John's phone”) XXXX (Ex. “at

home”). Is this correct?” (Voice tag and

phone number location registered in

phone book).

6-69

Interior Comfort

Bluetooth Hands-Free

Call waiting

qMute

A call can be interrupted to receive an

incoming call from a third party.

The microphone can be muted during a

call.

Call interrupt

1. Press the voice recognition/hands-free

switch with a short press.

A call can be switched to a new incoming

call.

Press the voice recognition/hands-free

switch with a short press.

2. Say: [Beep] “Mute”

3. Prompt: “Microphone muted”

Canceling mute

NOTE

l

To refuse an incoming call, press the voice

1. Press the voice recognition/hands-free

switch with a short press.

recognition/hands-free switch with a long

press.

l

After receiving a new incoming call, the

previous call is placed on hold.

2. Say: [Beep] “Mute off”

3. Prompt: “Microphone unmuted”

Switching calls

qTransferring a call

Switching back to the previous call can

also be done.

Press the voice recognition/hands-free

switch with a short press.

Transferring a call from Hands-Free to

a mobile phone

Communication between the hands-free

unit and a mobile phone is canceled, and

the line can be switched to a standard call

using a mobile phone.

Ending the current call

Press the voice recognition/hands-free

switch during the call with a long press.

1. Press the voice recognition/hands-free

switch with a short press.

q

Voice guidance interrupt operation

Voice guidance can be stopped by

pressing the voice recognition/hands-free

switch with a short press while it is being

heard. A new voice input command can

then be spoken by the user.

2. Say: [Beep] “Transfer call”

3. Prompt: “Transferred call to phone”

Transferring a call from a mobile

phone to Hands-Free

· Press the voice recognition/hands-free

switch with a short press.

Communication between mobile phones

can be switched to the Bluetooth Hands-

Free system.

qPhone book settings

1. Press the voice recognition/hands-free

switch with a short press.

Editing phone book

The data registered to the Bluetooth

Hands-Free phone book can be edited.

2. Say: [Beep] “Transfer call”

3. Prompt: “Transferred call to Hands

Free system”

6-70

Interior Comfort

Bluetooth Hands-Free

NOTE

Do this function only when parked. It is too

distracting to attempt while driving and you

may make too many errors to be effective.

If there was no previous phone number

registered to a location (Ex. “Work”), the

prompt will only read out “Number, please”.

1. Press the voice recognition/hands-free

switch with a short press.

12. Say: [Beep] “XXXXXXXXXXX

(Ex. “666-1234”)” (Say the new

phone number to be registered.)

2. Say: [Beep] “Phone book”

13. Prompt: “XXXXXXXXXXX (Ex.

“666-1234”) (The new phone number

to be registered). Is this correct?”

3. Prompt: “Select one of the following:

new entry, edit, list names, delete or

erase all..., or say “cancel” to return to

main menu.”

14. Say: [Beep] “Yes”

4. Say: [Beep] “Edit”

15. Prompt: “Number changed. Would

you like to call this number, edit

another entry..., or say “cancel” to

return to main menu.”

5. Prompt: “Please say the name of the

entry you would like to edit, or say

“List names”..., or say “cancel” to

return to main menu.”

Phone book data deletion

6. Say: [Beep] “XXXXX... (Ex. “Mary's

phone”)” (Say the voice tag for the

registered name to be edited in the

phone book.)

Erasing individual phone book data

Individual data registered to the Bluetooth

Hands-Free phone book can be cleared.

NOTE

7. Prompt: “Home, Work, Mobile, or

Pager?”

Do this function only when parked. It is too

distracting to attempt while driving and you

may make too many errors to be effective.

8. Say: [Beep] “Home” (Say the

registered location to be edited:

“Home”, “Work”, “Mobile”, or

“Pager”).

1. Press the voice recognition/hands-free

switch with a short press.

2. Say: [Beep] “Phone book”

9. Prompt: “XXXXX... (Ex. “Mary's

phone”) (Registered voice tag) XXXX

(Ex. “Home”) (Registered location). Is

this correct?”

3. Prompt: “Select one of the following:

new entry, edit, list names, delete or

erase all..., or say “cancel” to return to

main menu.”

10. Say: [Beep] “Yes”

4. Say: [Beep] “Delete”

11. Prompt: “The current number is

XXXXXXXXXXX (Ex. “555-1234”)

(Currently registered number). New

number, please.”

5. Prompt: “Please say the name of the

entry you would like to delete, or say

“List names”..., or say “cancel” to

return to main menu.”

6-71

Interior Comfort

Bluetooth Hands-Free

6. Say: [Beep] “XXXXX... (Ex. “John's

phone”)” (Say the registered voice tag

to be deleted from the phone book.)

8. Say: [Beep] “Yes”

9. Prompt: “Please wait, erasing the

Hands Free system phone book.”

7. Prompt: “Deleting XXXXX... (Ex.

“John's phone”) (Registered voice tag)

Home (Registered location). Is this

correct?”

10. Prompt: “Hands-Free system phone

book erased, returning to main

menu.”

Read-out of names registered to the

Bluetooth Hands-Free phone book

8. Say: [Beep] “Yes”

9. Prompt: “XXXXX... (Ex. “John's

phone”) (Registered voice tag) Home

(Registered location) deleted, returning

to main menu.”

The Bluetooth Hands-Free system can

read out the list of names registered to its

phone book.

1. Press the voice recognition/hands-free

switch with a short press.

Complete deletion of the phone book

data

2. Say: [Beep] “Phone book”

All data registered to the Bluetooth

Hands-Free phone book can be erased.

3. Prompt: “Select one of the following:

new entry, edit, list names, delete or

erase all..., or say “cancel” to return to

main menu.”

NOTE

Do this function only when parked. It is too

distracting to attempt while driving and you

may make too many errors to be effective.

4. Say: [Beep] “List names”

5. Prompt: “XXXXX..., XXXXX...,

XXXXX... (Ex. “John's phone”, Mary's

phone, Bill's phone)” (Voice guidance

reads out the voice tags registered to

the phone book.)

1. Press the voice recognition/hands-free

switch with a short press.

2. Say: [Beep] “Phone book”

3. Prompt: “Select one of the following:

new entry, edit, list names, delete or

erase all..., or say “cancel” to return to

main menu.”

Press the voice recognition/hands-free

switch during the read-out at the desired

name, and then say one of the following

voice commands to execute it.

4. Say: [Beep] “Erase all”

l

“Continue”: Continues the voice

5. Prompt: “Are you sure you want to

erase everything from your Hands Free

system phone book?”

guidance.

“Call”: Calls the registered phone

l

number.

l

“Edit”: Edits the registered phone

6. Say: [Beep] “Yes”

number.

7. Prompt: “You are about to delete

everything from your Hands Free

system phone book. Do you want to

continue?”

l

“Delete”: Deletes the registered phone

number.

l

“Previous”: Returns to the previous

phone number.

“Cancel”: Returns to main menu.

l

6-72

Interior Comfort

Bluetooth Hands-Free

6. Prompt: “End of list, would you like

to start from the beginning?”

Hands-Free Telephone Setting

qMobile phone

7. Say: [Beep] “No”

Mobile phone registration

8. Prompt: “Returning to main menu.”

For the registration of a Bluetooth

equipped mobile telephone to Bluetooth

Hands-Free, refer to “Bluetooth Hands-

Free preparation” (page 6-64).

Registered mobile phone read-out

Bluetooth Hands-Free can read-out the

mobile phones registered to its system.

NOTE

Do this function only when parked. It is too

distracting to attempt while driving and you

may make too many errors to be effective.

1. Press the voice recognition/hands-free

switch with a short press.

2. Say: [Beep] “Setup”

3. Prompt: “Select one of the following:

pairing options, confirmation prompts,

select phone, language, or passcode...,

or say “cancel” to return to main

menu.”

4. Say: [Beep] “Pairing options”

5. Prompt: “Do you want to pair a

phone, delete a phone, or list paired

phones?”

6. Say: [Beep] “List phones”

7. Prompt: “XXXXX..., XXXXX...,

XXXXX... (Ex. Phone A, phone B,

phone C)” (The voice guidance reads

out the phone tags registered to the

hands-free system.)

6-73

Interior Comfort

Bluetooth Hands-Free

Press the voice recognition/hands-free

switch during the read-out at the desired

phone, and then say one of the following

voice commands to execute it.

7. Prompt: “XXXXX... (Ex. phone B...)

(Registered phone tag) selected, is this

correct?”

8. Say: [Beep] “Yes”

l

“Select”: Programmed the mobile

phone when the voice recognition/

hands-free switch was pressed.

“Continue”: Continues the voice

9. Prompt: “XXXXX... (Ex. phone B...)

(Phone tag) will temporarily override

phone priorities, returning to main

menu.”

l

guidance.

l

“Delete”: Deletes the registered mobile

phone.

“Previous”: Returns to the previous

mobile phone.

Registered mobile phone deletion

l

Registered mobile phones can be deleted

individually or collectively.

NOTE

8. Prompt: “End of list, would you like

to start from the beginning?”

Do this function only when parked. It is too

distracting to attempt while driving and you

may make too many errors to be effective.

9. Say: [Beep] “No”

10. Prompt: “Returning to main menu.”

Mobile phone selection

1. Press the voice recognition/hands-free

switch with a short press.

This function is for switching to a

different mobile phone which has been

registered beforehand. The selected

mobile phone will remain in effect until

the ignition switch is turned off.

2. Say: [Beep] “Setup”

3. Prompt: “Select one of the following:

pairing options, confirmation prompts,

select phone, language, or passcode...,

or say “cancel” to return to main

menu.”

1. Press the voice recognition/hands-free

switch with a short press.

4. Say: [Beep] “Pairing options”

2. Say: [Beep] “Setup”

5. Prompt: “Do you want to pair a

phone, delete a phone, or list paired

phones?”

3. Prompt: “Select one of the following:

pairing options, confirmation prompts,

select phone, language, or passcode...,

or say “cancel” to return to main

menu.”

NOTE

A registered mobile phone can be deleted

using the registration list.

4. Say: [Beep] “Select phone”

6. Say: [Beep] “Delete phone”

5. Prompt: “Please say 1 (priority 1) for

XXXXX... (Ex. phone A), 2 (priority

2) for XXXXX... (Ex. phone B...)”

7. Prompt: “Please say 1 (priority 1) for

XXXXX... (Ex. phone A), 2 (priority

2) for XXXXX... (Ex. phone B...)”

(The voice guidance reads out each

phone in the order of priority and the

phone tag).

6. Say: [Beep] “2” (Say the priority

number for the mobile phone to be

used as first priority.)

6-74

Interior Comfort

Bluetooth Hands-Free

8. Say: [Beep] “2” (Say the order of

priority of the mobile phone to be

deleted.)

8. Say: [Beep] “XXXX” (Say a desired 4-

digit passcode, “PCode”.)

9. Prompt:“Passcode XXXX (Passcode,

PCode). Is this correct?”

NOTE

Say “All” to delete all mobile phones.

10. Say: [Beep] “Yes”

9. Prompt: “Removing XXXXX... (Ex.

phone B...) (Registered phone tag). Is

this correct?”

11. Prompt:“Passcode is enabled,

returning to main menu.”

Using Bluetooth Hands-Free with a

passcode

10. Say: [Beep] “Yes”

11. Prompt: “Deleted”

1. Press the voice recognition/hands-free

switch with a short press.

qSecurity setting

2. Prompt:“Hands-Free system is locked.

State the passcode to continue.”

If a passcode is set, the system cannot be

activated unless the passcode is input.

3. Say: [Beep] “XXXX” (Say the set

passcode “PCode”.)

NOTE

Do this function only when parked. It is too

distracting to attempt while driving and you

may make too many errors to be effective.

4. If the correct passcode is input, voice

guidance “XXXXXX... (Ex. “Mary's

phone”) (Phone tag) is connected” is

announced.

Passcode setting

If the passcode is incorrect, voice

guidance “XXXX (4-digit passcode,

Pcode) incorrect passcode, please try

again” is announced.

1. Press the voice recognition/hands-free

switch with a short press.

2. Say: [Beep] “Setup”

Canceling the passcode

3. Prompt:“Select one of the following:

pairing options, confirmation prompts,

select phone, language, or passcode...,

or say “cancel” to return to main

menu.”

NOTE

Do this function only when parked. It is too

distracting to attempt while driving and you

may make too many errors to be effective.

4. Say: [Beep] “Passcode”

1. Press the voice recognition/hands-free

switch with a short press.

5. Prompt: “Passcode is disabled. Would

you like to enable it?”

2. Say: [Beep] “Setup”

6. Say: [Beep] “Yes”

3. Prompt: “Select one of the following:

pairing options, confirmation prompts,

select phone, language, or passcode...,

or say “cancel” to return to main

menu.”

7. Prompt:“Please say a 4-digit passcode.

Remember this passcode. It will be

required to use this system.”

6-75

Interior Comfort

Bluetooth Hands-Free

4. Say: [Beep] “Passcode”

5. Prompt:“Confirmation prompts are

on/off. Would you like to turn

5. Prompt:“Passcode is enabled. Would

you like to disable it?”

confirmation prompts off/on?”

6. Say: [Beep] “Yes”

7. Prompt:“Confirmation prompts are

off/on, returning to main menu.”

7. Prompt:“Passcode is disabled,

returning to main menu.”

Confirmation Prompts

qVoice recognition learning

function (Speaker enrollment)

The confirmation prompt confirms the

command content to the user before

advancing to the operation requested by

the user. When this function is turned on,

the system reads out the voice input

command previously received and

confirms whether the command is correct

before advancing to the command

execution.

When the confirmation prompt function is

turned on:

(Ex. “Calling John's phone. Is this

correct?”)

The voice recognition learning function

enables voice recognition appropriate to

the characteristics of the user's voice.

If the recognition of the voice input

commands to the system is not adequate,

this function can largely improve the

system's voice recognition of the user. If

your voice can be recognized sufficiently

without using this function, you may not

realize the added benefit of the function.

To register your voice, the voice input

command list must be read out. Read out

the list when the vehicle is parked.

Perform the registration in as quiet a place

as possible (page 6-63).

When the confirmation prompt function is

turned off:

(Ex. “Calling John's phone.”)

The registration must be performed

completely. The required time is a few

minutes. The user needs to be seated in

the driver's seat with the voice input

command list for voice recognition

learning open to the page indicated below.

NOTE

If the confirmation prompt function is turned

off when making an emergency call, the system

reads out and confirms the command before

executing it.

1. Press the voice recognition/hands-free

switch with a short press.

1. Press the voice recognition/hands-free

switch with a short press.

2. Say: [Beep] “Setup”

2. Say: [Beep] “Voice training”

3. Prompt:“Select one of the following:

pairing options, confirmation prompts,

select phone, language, or passcode...,

or say “cancel” to return to main

menu.”

3. Prompt: “This operation must be

performed in a quiet environment while

the vehicle is stopped. See the owner's

manual for the list of required training

phrases. Press and release the phone

button when you are ready to begin.

Press and hold the phone button to

cancel at any time.”

4. Say: [Beep] “Confirmation prompts”

6-76

Interior Comfort

Bluetooth Hands-Free

4. Press the voice recognition/hands-free

switch with a short press.

NOTE

After user voice registration is completed,

voice guidance “Speaker enrollment is

complete, returning to main menu” is

announced.

5. The voice guidance reads out the voice

input command number (refer to the

voice input command list for voice

recognition learning). (Ex. “Please read

phrase 1”)

qDTMF (dual tone multi-

frequency signal) transmission

6. Say: [Beep] “0123456789” (Say the

voice input command for voice

recognition learning (1 to 8) according

to the voice guidance.)

This function is used when transmitting

DTMF via the user's voice. The receiver

of a DTMF transmission is generally a

home telephone answering machine or a

company's automated guidance call center

(When you send tone signals back

according to the voice guidance

recording).

7. Prompt: “Speaker enrollment is

complete, returning to main menu.”

Voice input command list for voice

recognition learning

1. Press the voice recognition/hands-free

switch with a short press.

When reading out, the following points

must be observed:

l

Read out the numbers one at a time

2. Say: [Beep] “XXXX... send” (Say

correctly and naturally.

(For example, “1234” must be read out

“one, two, three, four”, not “twelve, thirty

four”.)

DTMF code)

3. Prompt: “Sending XXXX... (DTMF

code)”

l

Do not read out parentheses. “ (” and

hyphens “-” are used for separating

numbers in a phone number.

Ex.

“ (888) 555-1212” must be spoken “Eight,

eight, eight, five, five, five, one, two, one,

two.”

Phrase

Command

0123456789

1

2

3

4

5

6

7

8

(888) 555-1212

Call

Dial

Setup

Cancel

Continue

Help

6-77

Interior Comfort

Bluetooth Hands-Free

Safety Certification

When Bluetooth Hands-

Free cannot be used

FCC ID: CB2MBLUEC07 IC:279B-

MBLUEC07

This device complies with Part 15 of the

FCC Rules and with RSS-210 of Industry

Canada. Operation is subject to the

following two conditions:

(1) This device may not cause harmful

interference, and

(2) This device must accept any

interference received, including

interference that may cause undesired

operation.

Bluetooth Hands-Free cannot be used

under the following conditions:

l

The mobile telephone is outside of the

communication area.

The mobile telephone has a

l

malfunction.

The mobile telephone is not connected

l

to the hands-free unit equipped on the

vehicle.

The mobile telephone battery is weak.

The mobile telephone is turned off.

The mobile telephone is placed where

l

WARNING

radio reception is difficult.

Changes or modifications not

expressively approved by the party

responsible for compliance could void

the user's authority to operate the

equipment.

The term “IC: ” before the radio

certification number only signifies that

Industry Canada technical specifications

were met.

The antenna used for this transmitter must

not be co-located or operating in

conjunction with any other antenna or

transmitter. End-users and installers must

be provided with installation instructions

and transmitter operating conditions for

satisfying RF exposure compliance.

6-78

Interior Comfort

Bluetooth Hands-Free

Mazda Bluetooth Hands-

Free Customer Service

For toll-free Bluetooth Hands-Free

customer service call 800-430-0153 or go

to www.MazdaUSA.com/bluetooth for

assistance.

6-79

Interior Comfort

Interior Equipment

Sunvisors

Interior Lights

When you need a sunvisor, lower it for

use in front.

qOverhead Light

Switch

Position

Overhead Light

qVanity Mirrors

Light off

To use the vanity mirror, lower the

sunvisor.

Light is on when any door is open

Light on

qTrunk Light

Switch

Position

Trunk Light

Light off

Light on when the trunk is open

6-80

Interior Comfort

Interior Equipment

Cup Holder

WARNING

Never use a cup holder to hold hot

liquids while the vehicle is moving:

Using a cup holder to hold hot liquids

while the vehicle is moving is

Multi-Pocket

Multi-pockets are on the inside of the

doors.

dangerous. If the contents spill, you

could be scalded.

Do not put anything other than cups or

drink cans in cup holders:

Putting objects other than cups or

drink cans in a cup holder is

dangerous.

During sudden braking or

Multi-pocket

maneuvering, occupants could be hit

and injured, or objects could be

thrown around the vehicle, causing

interference with the driver and the

possibility of an accident. Only use a

cup holder for cups or drink cans.

CAUTION

Do not use the multi-pockets for

containers without caps. The

contents may spill when the door is

opened or closed.

CAUTION

To reduce the possibility of injury in

an accident or a sudden stop, keep

cup holders closed when not in use.

To open the cup holder lid, press the

switch rearward and slide the lid open.

Switch

6-81

Interior Comfort

Interior Equipment

qSeat Side Box

Storage Compartments

To open, pull the release catch.

WARNING

Keep storage boxes closed when

driving:

Insert the key and turn it clockwise to

lock, counterclockwise to unlock.

Driving with the storage boxes open

is dangerous. To reduce the

possibility of injury in an accident or

a sudden stop, keep the storage

boxes closed when driving.

Unlock

Lock

CAUTION

Do not leave lighters or eyeglasses in

the storage boxes while parked under

the sun. A lighter could explode or

the plastic material in eyeglasses

could deform and crack from high

temperature.

qBack Trim Storage Box^í

Small items can be stored in the back trim

storage box.

qGlove Box

To open the glove box, pull the latch

toward you.

Insert the key (auxiliary key^*) and turn it

clockwise to lock, counterclockwise to

unlock.

* Advanced key equipped vehicle

Unlock

Lock

To use the back trim storage box

1. To use the desired storage box, slide

the seat in front of it all the way

forward.

Refer to Seat Slide on page 2-2.

2. Fold the seatback forward all the way

down.

Refer to Seat Recline on page 2-3.

6-82

^íSome models.

Interior Comfort

Interior Equipment

3. If your vehicle has a lid, pull the latch

to open.

Accessory Socket

The ignition switch must be in the ACC

or ON position.

Only use genuine Mazda accessories or

the equivalent requiring no greater than

120 W (DC 12 V, 10 A).

When finished, return the seat to its

original position and secure it. After

returning the seat to its original position,

make sure the seat is secured by

attempting to lightly move it forward and

backward.

CAUTION

Do not store excessive weight in the

back trim storage box as it could be

damaged.

qMesh Pocket

Maps or pamphlets can be placed in the

mesh pocket.

CAUTION

To prevent accessory socket damage

or electrical failure, pay attention to

the following:

Ø Do not use accessories that require

more than 120 W (DC 12 V, 10 A).

Ø Do not use accessories that are not

genuine Mazda accessories or the

equivalent.

Ø Close the cover when the accessory

socket is not in use to prevent

foreign objects and liquids from

getting into the accessory socket.

Ø Correctly insert the plug into the

accessory socket.

Mesh pocket

CAUTION

Do not place thick objects in the

mesh pocket as they could damage

the pocket.

NOTE

To prevent discharging of the battery, do not

use the socket for long periods with the engine

off or idling.

6-83

Interior Comfort

Interior Equipment

Windblocker

This windblocker reduces rear wind blast

into the cabin when driving with the

convertible top down.

To use the windblocker, lift it upright.

6-84

Interior Comfort for Your Mazda Mx-5 SUV Third Generation (2005-2015)

Related Topics

Popular Owner Manuals

Latest Owner Manuals