2005-2015 Mazda Mx-5 SUV Interior Comfort -> Bluetooth Hands-Free User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Interior Comfort -> Bluetooth Hands-Free for Your Mazda Mx-5 SUV Third Generation (2005-2015)

Interior Comfort  
Bluetooth Hands-Free  
Bluetooth Hands-Freeí  
CAUTION  
The types of mobile phones which  
can be connected to the hands-free  
unit are limited, so before purchasing  
or changing your mobile phone  
model, consult Mazda Bluetooth  
Hands-Free Customer Service or visit  
www.MazdaUSA.com/bluetooth for a  
complete list of compatible phones.  
Mobile phones which can be  
qWhat is Bluetooth Hands-Free?  
Bluetooth Hands-Free Outline  
By connecting a Bluetooth equipped  
mobile telephone to the hands-free unit  
equipped on the vehicle, making and  
receiving calls are possible using the  
voice recognition/hands-free switch  
located on the steering wheel, and saying  
the voice commands.  
connected to the hands-free system  
need to be compliant with Bluetooth  
specifications and the appropriate  
profile, however, even among these  
Bluetooth phones are some which  
will not connect with your Mazda or  
will have limited function. Therefore,  
consult Mazda Bluetooth Hands-Free  
Customer Service for information  
regarding mobile phone  
WARNING  
Perform phonebook registration related  
operations while the vehicle is parked:  
Performing phonebook registration  
while driving the vehicle could be a  
distraction to your driving and result  
in an unexpected accident. In  
addition, a mistake in performing the  
phonebook operation could result in  
the loss of important data.  
compatibility:  
Phone: 800-430-0153  
Web: www.MazdaUSA.com/  
bluetooth  
Bluetooth equipped mobile telephone  
Applicable Bluetooth specification  
Ver. 1.1 or higher  
Response profile  
A Bluetooth equipped mobile telephone  
communicates with the hands-free unit  
equipped on the vehicle using radio  
transmission (Bluetooth).  
For example, if the mobile telephone is  
placed in a coat pocket, the phone calls  
can be made through your mobile service  
without taking out and handling the  
mobile telephone.  
l
HFP (Hands Free Profile) Ver. 1.0  
DUN (Dial-up Networking Profile)  
l
Ver. 1.1  
Bluetooth is the registered trademark of  
Bluetooth SIG. Inc.  
íSome models.  
6-61  
Interior Comfort  
Bluetooth Hands-Free  
NOTE  
Voice Recognition/Hands-Free switch  
operations  
l
The Bluetooth Hands-Free system is  
operable several seconds after turning the  
ignition switch to the ACC or ON position  
(requires less than 15 seconds).  
If the ignition switch is turned off during a  
hands-free call, the line is transferred to the  
mobile telephone automatically.  
A short press or a long press of the voice  
recognition/hands-free switch is used to  
operate the system as follows:  
l
l
Short press (Press the button less than  
0.7 sec.)  
l
Long press (Press the button 0.7 sec. or  
l
If the mobile telephone is in a location  
more.)  
where radio reception is difficult such as a  
metal container or in the trunk, the call may  
not be connected using Bluetooth. If  
communication is not possible, change the  
location of the mobile telephone.  
Information display  
When available, the information display  
shows telephone numbers, Bluetooth  
Hands-Free messages, and operation  
status.  
qComponent parts  
Bluetooth Hands-Free consists of the  
following items:  
l
Voice Recognition/Hands-Free switch  
Information display  
Microphone  
Audio unit  
l
l
l
Voice Recognition/Hands-Free switch  
Bluetooth phone connected  
Basic functions of Bluetooth Hands-Free  
can be used for such things as making  
calls or hanging up using the voice  
recognition/hands-free switch on the  
steering wheel.  
Microphone  
The microphone is used for speaking  
voice commands or exchanging  
conversation.  
Microphone  
Voice recognition/hands-free switch  
6-62  
Interior Comfort  
Bluetooth Hands-Free  
l
Audio unit  
Dialects or different wording other than  
hands-free prompts cannot be  
recognized by voice recognition. Speak  
in the wording specified by the voice  
commands.  
The audio unit is used for adjusting the  
volume.  
qVoice  
NOTE  
To prevent the deterioration in voice  
recognition rate and voice quality, the  
following points must be observed:  
If the voice recognition performance is not  
satisfactory, refer to “Voice Recognition  
Learning Function (Speaker Enrollment)”  
(page 6-76).  
l
It is not necessary to face the  
microphone or approach it. Speak the  
voice commands while maintaining a  
safe driving position.  
Please be aware that the voice recognition  
may error despite following the above  
points.  
l
Close the windows and/or the  
moonroof to reduce loud noises from  
outside the vehicle, or turn down the  
airflow of the climate control system  
while Bluetooth Hands-Free is being  
used. Voice recognition may not  
function correctly or voice quality may  
deteriorate under the following  
conditions.  
qFunction restrictions while using  
Bluetooth Hands-Free  
Some functions are limited while  
Bluetooth Hands-Free is being used. They  
include:  
l
Beep sound and voice guidance related  
l
A passenger is speaking.  
to the audio unit are not heard.  
Beep sound related to the A/C  
l
l
Driving with the window and/or the  
moonroof open.  
Driving on bumpy roads.  
Noise outside of the vehicle is loud.  
(Construction sites, inside tunnels,  
excess oncoming traffic, or heavy  
rain.)  
Operation noise from turn signals,  
wipers, or the horn is heard.  
operation is not heard.  
l
l
qHow to use this section  
Descriptions in the text are as follows:  
Say: Voice commands to be spoken by  
you.  
Prompt: Voice guidance output from the  
speaker.  
l
l
A/C airflow is strong or wind is  
blowing on the microphone.  
There is noise coming from cargo  
loaded in the vehicle.  
NOTE  
l
Say voice commands after the beep sound  
[Beep] is heard.  
l
Voice commands may not be  
recognized depending on the voice. If  
the voice commands are not recognized  
correctly, repeat the commands in a  
louder voice, at a natural pace, as if  
speaking to another person.  
Example)  
Say: [Beep] “Dial”  
Prompt: “Number, please”  
Say: [Beep] “XXXXXXXXXXX (Ex.  
“555-1234”) (Telephone number)”  
6-63  
Interior Comfort  
Bluetooth Hands-Free  
Bluetooth Hands-Free Activation  
Method  
Basic Bluetooth Hands-  
Free Operation  
1. Program the mobile telephone (Pairing)  
Refer to Bluetooth Hands-Free  
preparation on page 6-64.  
q
Bluetooth Hands-Free preparation  
Language setting  
2. Press the voice recognition/hands-free  
switch with a short press.  
The available languages are English,  
Spanish, and Canadian French. If the  
language setting is changed, all of the  
voice guidance and voice input  
commands are done in the selected  
language.  
The hands-free system is activated.  
Functions of the hands-free telephone,  
such as making and receiving calls, can be  
used after the activation. (For details on  
the telephone functions, refer to “Basic  
Bluetooth Hands-Free Operation” or  
“Convenient Use of the Hands-Free  
System”.)  
NOTE  
l
If the language setting is changed, phone  
registration is maintained.  
Phonebook records are not cleared, but  
each language has a separate phonebook.  
Therefore, entries created in one language  
will need to be re-entered in the phonebook  
of the new language.  
l
Do these steps before you start driving.  
These less used functions are too  
distracting to undertake while driving until  
you are fully familiar with the system.  
Method 1  
1. Press the voice recognition/hands-free  
switch with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
select phone, language, or passcode, or  
say “cancel” to return to the main  
menu.”  
4. Say: [Beep] “Language”  
5. Prompt: “Select a language: English,  
French, or Spanish.”  
6. Say: [Beep] “French” (Speak the  
desired language: “English”, “French”  
or “Spanish”)  
6-64  
Interior Comfort  
Bluetooth Hands-Free  
NOTE  
Up to seven Bluetooth equipped mobile  
telephones can be programmed to the  
vehicle.  
Other language settings can also be made  
while in the current setting by saying the name  
of the language in the native pronunciation.  
NOTE  
l
A mobile telephone can be programmed  
7. Prompt: “French (Desired language)  
selected. Is this correct?”  
only when the vehicle is parked. If the  
vehicle starts to move, the pairing  
procedure will end. Programming is  
dangerous while driving - pair up your  
device before you start driving. Park the  
car in a safe place before programming.  
8. Say: [Beep] “Yes”  
9. Prompt: “French (Desired language)  
selected, returning to main menu”  
(Spoken in the newly selected  
language).  
l
Since the communication range of a  
Bluetooth equipped mobile telephone is  
about 10 meters (32 ft), if a mobile  
Method 2  
telephone is placed within a 10-meter (32  
ft) radius of the vehicle, it may be detected/  
programmed unintentionally while another  
telephone is being programmed.  
1. Press the voice recognition/hands-free  
switch with a short press.  
2. Say: [Beep] “French” (Say the desired  
language: “English”, “French”, or  
“Spanish”.)  
1. Activate the Bluetooth application of  
the mobile telephone.  
NOTE  
NOTE  
Other language settings can also be made  
while in the current setting by saying the name  
of the language in the native pronunciation.  
For the operation of the mobile telephone,  
refer to its instruction manual.  
2. Press the voice recognition/hands-free  
switch with a short press.  
3. Prompt: “Would you like to change  
the language to French (Desired  
language) ?”  
3. Say: [Beep] “Setup”  
4. Say: [Beep] “Yes”  
4. Prompt: “Select one of the following:  
Pairing options, confirmation prompts,  
select phone, language, or passcode, or  
say “cancel” to return to the main  
menu.”  
5. Prompt: “Please wait. Switching to  
French phone book. French selected,  
returning to main menu” (Spoken in  
the newly selected language).  
5. Say: [Beep] “Pairing options”  
Mobile telephone programming  
(Pairing)  
6. Prompt: “Do you want to pair a  
phone, delete a phone, or list paired  
phones?”  
To use Bluetooth Hands-Free, a mobile  
phone equipped with Bluetooth has to be  
programmed to the hands-free unit using  
the following procedure.  
7. Say: [Beep] “Pair a phone”  
8. Prompt: “Please say a 4-digit pairing  
code.”  
6-65  
Interior Comfort  
Bluetooth Hands-Free  
9. Say: [Beep] “XXXX” (Speak an  
arbitrary 4-digit pairing code. This can  
be any combination of 4 numbers.)  
NOTE  
Speak a programmed “phone tag” within 10  
seconds.  
If more than two mobile telephones are to be  
programmed, they cannot be programmed with  
the same or similar “phone tag”.  
NOTE  
l
Some devices accept only a particular  
pairing code (Usually, “0000” or “1234”).  
If pairing cannot be completed, refer to the  
owner's manual of your mobile device, and  
try those numbers if necessary.  
19. Prompt: “Adding XXXXXX - - -  
(Ex. “Stan's phone”) (Phone tag). Is  
this correct?”  
l
Record the code as it will be used to  
20. Say: [Beep] “Yes”  
program your phone in Step 16.  
21. Prompt: “Assign a priority for this  
phone between 1 and 7, where 1 is  
the phone used most often.”  
10. Prompt: “Pairing code XXXX (4-  
digit number). Is this correct?”  
11. Say: [Beep] “Yes” or “No”  
22. Say: [Beep] “1” (Speak a number of  
12. If “Yes”, go to Step 13.  
the desired priority from 1 to 7.)  
If “No”, the procedure returns to Step  
8.  
NOTE  
l
Normally, “1” is to be input (Highest  
13. Prompt: “Start pairing procedure on  
phone. See phone's manual for  
instructions.”  
priority).  
l
If more than two mobile telephones are  
registered, input the priority order from 1 to  
7.  
14. Using the mobile telephone, perform  
a search for the Bluetooth device  
(Peripheral device).  
23. Prompt: “XXXXXX - - - (Ex.  
“Stan's phone”) (Phone tag) set to  
priority X (Priority number). Is this  
correct?”  
NOTE  
For the operation of the mobile telephone,  
refer to its instruction manual.  
24. Say: [Beep] “Yes”  
15. Select “Mazda” from the device list  
25. Prompt: “Pairing complete”  
searched by the mobile phone.  
After a mobile telephone is registered, the  
system automatically identifies the phone.  
By pressing the voice recognition/hands-  
free switch again, or by pressing the voice  
recognition/hands-free switch first after  
turning the ignition switch from the  
LOCK to the ACC position, the system  
reads out a voice guidance, “XXXXXX -  
- - (Ex. “Stan's phone”) (Phone tag) is  
connected”. If two or more telephones are  
registered, the one with the highest  
priority is selected.  
16. Input the 4-digit pairing code set in  
Step 9 to the mobile telephone.  
17. Prompt: “Please say the name of the  
phone after the beep.”  
18. Say: [Beep] “XXXX - - -” (Speak a  
“phone tag”, an arbitrary name for the  
phone.)  
Example: “Stan's phone.”  
6-66  
Interior Comfort  
Bluetooth Hands-Free  
NOTE  
qReceiving an incoming call  
Depending on the device, the registration  
status may be lost after a certain period of  
time. If this occurs, repeat the entire process  
from Step 1.  
1. Prompt: “Incoming call, press the  
phone button to answer”.  
2. To accept the call, press the voice  
recognition/hands-free switch with a  
short press.  
qMaking a call using a telephone  
To reject the call, press the voice  
recognition/hands-free switch with a  
long press.  
number  
NOTE  
Practice this while parked until you are  
confident you can do it while driving in a non-  
taxing road situation. If you are not completely  
comfortable, make all calls from a safe  
parking position, and move out only when fully  
under control and you can devote your eyes  
and mind to driving.  
qHanging up a call  
Press the voice recognition/hands-free  
switch during the call with a long press.  
A beep sound will confirm that call is  
ended.  
1. Press the voice recognition/hands-free  
switch with a short press.  
qVolume adjustment  
The power/volume dial of the audio unit  
is used to adjust the volume. Turn the dial  
to the right to increase volume, to the left  
to decrease it.  
2. Say: [Beep] “Dial”  
3. Prompt: “Number, please”  
4. Say: [Beep] “XXXXXXXXXXX (Ex.  
“555-1234”) (Telephone number)”  
5. Prompt: “Dialing XXXXXXXXXXX  
(Ex. “555-1234”) (Telephone number)  
is this correct?”  
6. Say: [Beep] “Yes” or “No”.  
7. When “Yes” is spoken, the call is  
made.  
When “No” is spoken, the procedure  
returns to Step 3.  
NOTE  
NOTE  
l
The “Dial” command and a telephone number  
The volume can also be adjusted using the  
volume button on the steering wheel.  
The music volume of the audio unit cannot  
be adjusted while Bluetooth Hands-Free is  
being used.  
can be combined.  
Ex. In Step 2, say, “Dial 123-4567”, then,  
Steps 3 and 4 can be skipped.  
l
6-67  
Interior Comfort  
Bluetooth Hands-Free  
qHelp function use  
Convenient Use of the  
Hands-Free System  
The help function informs the user of all  
the available voice commands under the  
current conditions.  
qPhone book usage  
1. Press the voice recognition/hands-free  
switch with a short press.  
Phone book registration  
Phone numbers can be registered to the  
Bluetooth Hands-Free phone book.  
2. Say: [Beep] “Help”  
3. Follow the prompts to receive the  
appropriate voice guidance  
instructions.  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
1. Press the voice recognition/hands-free  
switch with a short press.  
2. Say: [Beep] “Phone book”  
3. Prompt: “Select one of the following:  
new entry, edit, list names, delete or  
erase all..., or say “cancel” to return to  
main menu.”  
4. Say: [Beep] “New entry”  
5. Prompt: “Name please.”  
6. Say: [Beep] “XXXXX... (Ex. “Mary's  
phone”)” (Say a voice tag for the name  
registered.)  
7. Prompt: “Adding XXXXX... (Ex.  
“Mary's phone”) (Registered voice  
tag). Is this correct?”  
8. Say: [Beep] “Yes”  
9. Prompt: “Home, Work, Mobile, or  
Pager?”  
10. Say: [Beep] “Mobile” (Say “Home”,  
“Work”, “Mobile”, or “Pager”, for the  
desired location to be registered.)  
11. Prompt: “Mobile” (Location to be  
registered). Is this correct?  
12. Say: [Beep] “Yes”  
6-68  
Interior Comfort  
Bluetooth Hands-Free  
13. Prompt: “Number, please.”  
6. Say: [Beep] “Yes”  
14. Say: [Beep] “XXXXXXXXXXX  
(Ex. “555-1234”)” (Say the phone  
number to be registered.)  
7. Prompt: “Dialing”  
NOTE  
The “Call” command and the voice tag can be  
15. Prompt: “XXXXXXXXXXX (Ex.  
“555-1234”) (Phone number  
combined.  
Ex. In Step 2, say, “Call John's phone”, then,  
Steps 3 and 4 can be skipped.  
registration). Is this correct? ”  
16. Say: [Beep] “Yes”  
qRedialing function  
17. Prompt: “Number saved. Would you  
like to add another number for this  
entry?”  
Redialing the number of the person  
previously dialed using the phone is  
possible.  
18. Say: [Beep] “Yes” or “No”.  
1. Press the voice recognition/hands-free  
switch with a short press.  
19. If “Yes”, an additional phone number  
registration can be made for the same  
entry.  
2. Say: [Beep] “Redial”  
3. Prompt: “Dialing”  
If “No”, the procedure proceeds to  
Step 20.  
qEmergency calls  
20. Prompt: “Returning to main menu.”  
A call can be made to the emergency  
phone number (911) using the voice input  
command.  
Making calls using the phone book  
Telephone calls can be made by saying  
the name of a person (voice tag) whose  
phone number has been registered in  
Bluetooth Hands-Free in advance.  
For the phone book setting method, refer  
to (page 6-70).  
1. Press the voice recognition/hands-free  
switch with a short press.  
2. Say: [Beep] “Emergency”  
3. Prompt: “Calling “911”, is this  
correct?”  
1. Press the voice recognition/hands-free  
switch with a short press.  
4. Say: [Beep] “Yes”  
5. Prompt: “Dialing”  
2. Say: [Beep] “Call”  
3. Prompt: “Name please.”  
4. Say: [Beep] “XXXXX... (Ex. “John's  
phone”)” (Say a voice tag registered in  
the phone book.)  
qRefusing an incoming call  
For incoming call refusal, refer to  
“Receiving an incoming call” (page 6-67).  
5. Prompt: “Calling XXXXX... (Ex.  
“John's phone”) XXXX (Ex. “at  
home”). Is this correct?” (Voice tag and  
phone number location registered in  
phone book).  
6-69  
Interior Comfort  
Bluetooth Hands-Free  
Call waiting  
qMute  
A call can be interrupted to receive an  
incoming call from a third party.  
The microphone can be muted during a  
call.  
Call interrupt  
1. Press the voice recognition/hands-free  
switch with a short press.  
A call can be switched to a new incoming  
call.  
Press the voice recognition/hands-free  
switch with a short press.  
2. Say: [Beep] “Mute”  
3. Prompt: “Microphone muted”  
Canceling mute  
NOTE  
l
To refuse an incoming call, press the voice  
1. Press the voice recognition/hands-free  
switch with a short press.  
recognition/hands-free switch with a long  
press.  
l
After receiving a new incoming call, the  
previous call is placed on hold.  
2. Say: [Beep] “Mute off”  
3. Prompt: “Microphone unmuted”  
Switching calls  
qTransferring a call  
Switching back to the previous call can  
also be done.  
Press the voice recognition/hands-free  
switch with a short press.  
Transferring a call from Hands-Free to  
a mobile phone  
Communication between the hands-free  
unit and a mobile phone is canceled, and  
the line can be switched to a standard call  
using a mobile phone.  
Ending the current call  
Press the voice recognition/hands-free  
switch during the call with a long press.  
1. Press the voice recognition/hands-free  
switch with a short press.  
q
Voice guidance interrupt operation  
Voice guidance can be stopped by  
pressing the voice recognition/hands-free  
switch with a short press while it is being  
heard. A new voice input command can  
then be spoken by the user.  
2. Say: [Beep] “Transfer call”  
3. Prompt: “Transferred call to phone”  
Transferring a call from a mobile  
phone to Hands-Free  
· Press the voice recognition/hands-free  
switch with a short press.  
Communication between mobile phones  
can be switched to the Bluetooth Hands-  
Free system.  
qPhone book settings  
1. Press the voice recognition/hands-free  
switch with a short press.  
Editing phone book  
The data registered to the Bluetooth  
Hands-Free phone book can be edited.  
2. Say: [Beep] “Transfer call”  
3. Prompt: “Transferred call to Hands  
Free system”  
6-70  
Interior Comfort  
Bluetooth Hands-Free  
NOTE  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
If there was no previous phone number  
registered to a location (Ex. “Work”), the  
prompt will only read out “Number, please”.  
1. Press the voice recognition/hands-free  
switch with a short press.  
12. Say: [Beep] “XXXXXXXXXXX  
(Ex. “666-1234”)” (Say the new  
phone number to be registered.)  
2. Say: [Beep] “Phone book”  
13. Prompt: “XXXXXXXXXXX (Ex.  
“666-1234”) (The new phone number  
to be registered). Is this correct?”  
3. Prompt: “Select one of the following:  
new entry, edit, list names, delete or  
erase all..., or say “cancel” to return to  
main menu.”  
14. Say: [Beep] “Yes”  
4. Say: [Beep] “Edit”  
15. Prompt: “Number changed. Would  
you like to call this number, edit  
another entry..., or say “cancel” to  
return to main menu.”  
5. Prompt: “Please say the name of the  
entry you would like to edit, or say  
“List names”..., or say “cancel” to  
return to main menu.”  
Phone book data deletion  
6. Say: [Beep] “XXXXX... (Ex. “Mary's  
phone”)” (Say the voice tag for the  
registered name to be edited in the  
phone book.)  
Erasing individual phone book data  
Individual data registered to the Bluetooth  
Hands-Free phone book can be cleared.  
NOTE  
7. Prompt: “Home, Work, Mobile, or  
Pager?”  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
8. Say: [Beep] “Home” (Say the  
registered location to be edited:  
“Home”, “Work”, “Mobile”, or  
“Pager”).  
1. Press the voice recognition/hands-free  
switch with a short press.  
2. Say: [Beep] “Phone book”  
9. Prompt: “XXXXX... (Ex. “Mary's  
phone”) (Registered voice tag) XXXX  
(Ex. “Home”) (Registered location). Is  
this correct?”  
3. Prompt: “Select one of the following:  
new entry, edit, list names, delete or  
erase all..., or say “cancel” to return to  
main menu.”  
10. Say: [Beep] “Yes”  
4. Say: [Beep] “Delete”  
11. Prompt: “The current number is  
XXXXXXXXXXX (Ex. “555-1234”)  
(Currently registered number). New  
number, please.”  
5. Prompt: “Please say the name of the  
entry you would like to delete, or say  
“List names”..., or say “cancel” to  
return to main menu.”  
6-71  
Interior Comfort  
Bluetooth Hands-Free  
6. Say: [Beep] “XXXXX... (Ex. “John's  
phone”)” (Say the registered voice tag  
to be deleted from the phone book.)  
8. Say: [Beep] “Yes”  
9. Prompt: “Please wait, erasing the  
Hands Free system phone book.”  
7. Prompt: “Deleting XXXXX... (Ex.  
“John's phone”) (Registered voice tag)  
Home (Registered location). Is this  
correct?”  
10. Prompt: “Hands-Free system phone  
book erased, returning to main  
menu.”  
Read-out of names registered to the  
Bluetooth Hands-Free phone book  
8. Say: [Beep] “Yes”  
9. Prompt: “XXXXX... (Ex. “John's  
phone”) (Registered voice tag) Home  
(Registered location) deleted, returning  
to main menu.”  
The Bluetooth Hands-Free system can  
read out the list of names registered to its  
phone book.  
1. Press the voice recognition/hands-free  
switch with a short press.  
Complete deletion of the phone book  
data  
2. Say: [Beep] “Phone book”  
All data registered to the Bluetooth  
Hands-Free phone book can be erased.  
3. Prompt: “Select one of the following:  
new entry, edit, list names, delete or  
erase all..., or say “cancel” to return to  
main menu.”  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
4. Say: [Beep] “List names”  
5. Prompt: “XXXXX..., XXXXX...,  
XXXXX... (Ex. “John's phone”, Mary's  
phone, Bill's phone)” (Voice guidance  
reads out the voice tags registered to  
the phone book.)  
1. Press the voice recognition/hands-free  
switch with a short press.  
2. Say: [Beep] “Phone book”  
3. Prompt: “Select one of the following:  
new entry, edit, list names, delete or  
erase all..., or say “cancel” to return to  
main menu.”  
Press the voice recognition/hands-free  
switch during the read-out at the desired  
name, and then say one of the following  
voice commands to execute it.  
4. Say: [Beep] “Erase all”  
l
“Continue”: Continues the voice  
5. Prompt: “Are you sure you want to  
erase everything from your Hands Free  
system phone book?”  
guidance.  
“Call”: Calls the registered phone  
l
number.  
l
“Edit”: Edits the registered phone  
6. Say: [Beep] “Yes”  
number.  
7. Prompt: “You are about to delete  
everything from your Hands Free  
system phone book. Do you want to  
continue?”  
l
“Delete”: Deletes the registered phone  
number.  
l
“Previous”: Returns to the previous  
phone number.  
“Cancel”: Returns to main menu.  
l
6-72  
Interior Comfort  
Bluetooth Hands-Free  
6. Prompt: “End of list, would you like  
to start from the beginning?”  
Hands-Free Telephone Setting  
qMobile phone  
7. Say: [Beep] “No”  
Mobile phone registration  
8. Prompt: “Returning to main menu.”  
For the registration of a Bluetooth  
equipped mobile telephone to Bluetooth  
Hands-Free, refer to “Bluetooth Hands-  
Free preparation” (page 6-64).  
Registered mobile phone read-out  
Bluetooth Hands-Free can read-out the  
mobile phones registered to its system.  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
1. Press the voice recognition/hands-free  
switch with a short press.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
pairing options, confirmation prompts,  
select phone, language, or passcode...,  
or say “cancel” to return to main  
menu.”  
4. Say: [Beep] “Pairing options”  
5. Prompt: “Do you want to pair a  
phone, delete a phone, or list paired  
phones?”  
6. Say: [Beep] “List phones”  
7. Prompt: “XXXXX..., XXXXX...,  
XXXXX... (Ex. Phone A, phone B,  
phone C)” (The voice guidance reads  
out the phone tags registered to the  
hands-free system.)  
6-73  
Interior Comfort  
Bluetooth Hands-Free  
Press the voice recognition/hands-free  
switch during the read-out at the desired  
phone, and then say one of the following  
voice commands to execute it.  
7. Prompt: “XXXXX... (Ex. phone B...)  
(Registered phone tag) selected, is this  
correct?”  
8. Say: [Beep] “Yes”  
l
“Select”: Programmed the mobile  
phone when the voice recognition/  
hands-free switch was pressed.  
“Continue”: Continues the voice  
9. Prompt: “XXXXX... (Ex. phone B...)  
(Phone tag) will temporarily override  
phone priorities, returning to main  
menu.”  
l
guidance.  
l
“Delete”: Deletes the registered mobile  
phone.  
“Previous”: Returns to the previous  
mobile phone.  
Registered mobile phone deletion  
l
Registered mobile phones can be deleted  
individually or collectively.  
NOTE  
8. Prompt: “End of list, would you like  
to start from the beginning?”  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
9. Say: [Beep] “No”  
10. Prompt: “Returning to main menu.”  
Mobile phone selection  
1. Press the voice recognition/hands-free  
switch with a short press.  
This function is for switching to a  
different mobile phone which has been  
registered beforehand. The selected  
mobile phone will remain in effect until  
the ignition switch is turned off.  
2. Say: [Beep] “Setup”  
3. Prompt: “Select one of the following:  
pairing options, confirmation prompts,  
select phone, language, or passcode...,  
or say “cancel” to return to main  
menu.”  
1. Press the voice recognition/hands-free  
switch with a short press.  
4. Say: [Beep] “Pairing options”  
2. Say: [Beep] “Setup”  
5. Prompt: “Do you want to pair a  
phone, delete a phone, or list paired  
phones?”  
3. Prompt: “Select one of the following:  
pairing options, confirmation prompts,  
select phone, language, or passcode...,  
or say “cancel” to return to main  
menu.”  
NOTE  
A registered mobile phone can be deleted  
using the registration list.  
4. Say: [Beep] “Select phone”  
6. Say: [Beep] “Delete phone”  
5. Prompt: “Please say 1 (priority 1) for  
XXXXX... (Ex. phone A), 2 (priority  
2) for XXXXX... (Ex. phone B...)”  
7. Prompt: “Please say 1 (priority 1) for  
XXXXX... (Ex. phone A), 2 (priority  
2) for XXXXX... (Ex. phone B...)”  
(The voice guidance reads out each  
phone in the order of priority and the  
phone tag).  
6. Say: [Beep] “2” (Say the priority  
number for the mobile phone to be  
used as first priority.)  
6-74  
Interior Comfort  
Bluetooth Hands-Free  
8. Say: [Beep] “2” (Say the order of  
priority of the mobile phone to be  
deleted.)  
8. Say: [Beep] “XXXX” (Say a desired 4-  
digit passcode, “PCode”.)  
9. Prompt:“Passcode XXXX (Passcode,  
PCode). Is this correct?”  
NOTE  
Say “All” to delete all mobile phones.  
10. Say: [Beep] “Yes”  
9. Prompt: “Removing XXXXX... (Ex.  
phone B...) (Registered phone tag). Is  
this correct?”  
11. Prompt:“Passcode is enabled,  
returning to main menu.”  
Using Bluetooth Hands-Free with a  
passcode  
10. Say: [Beep] “Yes”  
11. Prompt: “Deleted”  
1. Press the voice recognition/hands-free  
switch with a short press.  
qSecurity setting  
2. Prompt:“Hands-Free system is locked.  
State the passcode to continue.”  
If a passcode is set, the system cannot be  
activated unless the passcode is input.  
3. Say: [Beep] “XXXX” (Say the set  
passcode “PCode”.)  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
4. If the correct passcode is input, voice  
guidance “XXXXXX... (Ex. “Mary's  
phone”) (Phone tag) is connected” is  
announced.  
Passcode setting  
If the passcode is incorrect, voice  
guidance “XXXX (4-digit passcode,  
Pcode) incorrect passcode, please try  
again” is announced.  
1. Press the voice recognition/hands-free  
switch with a short press.  
2. Say: [Beep] “Setup”  
Canceling the passcode  
3. Prompt:“Select one of the following:  
pairing options, confirmation prompts,  
select phone, language, or passcode...,  
or say “cancel” to return to main  
menu.”  
NOTE  
Do this function only when parked. It is too  
distracting to attempt while driving and you  
may make too many errors to be effective.  
4. Say: [Beep] “Passcode”  
1. Press the voice recognition/hands-free  
switch with a short press.  
5. Prompt: “Passcode is disabled. Would  
you like to enable it?”  
2. Say: [Beep] “Setup”  
6. Say: [Beep] “Yes”  
3. Prompt: “Select one of the following:  
pairing options, confirmation prompts,  
select phone, language, or passcode...,  
or say “cancel” to return to main  
menu.”  
7. Prompt:“Please say a 4-digit passcode.  
Remember this passcode. It will be  
required to use this system.”  
6-75  
Interior Comfort  
Bluetooth Hands-Free  
4. Say: [Beep] “Passcode”  
5. Prompt:“Confirmation prompts are  
on/off. Would you like to turn  
5. Prompt:“Passcode is enabled. Would  
you like to disable it?”  
confirmation prompts off/on?”  
6. Say: [Beep] “Yes”  
6. Say: [Beep] “Yes”  
7. Prompt:“Confirmation prompts are  
off/on, returning to main menu.”  
7. Prompt:“Passcode is disabled,  
returning to main menu.”  
Confirmation Prompts  
qVoice recognition learning  
function (Speaker enrollment)  
The confirmation prompt confirms the  
command content to the user before  
advancing to the operation requested by  
the user. When this function is turned on,  
the system reads out the voice input  
command previously received and  
confirms whether the command is correct  
before advancing to the command  
execution.  
When the confirmation prompt function is  
turned on:  
(Ex. “Calling John's phone. Is this  
correct?”)  
The voice recognition learning function  
enables voice recognition appropriate to  
the characteristics of the user's voice.  
If the recognition of the voice input  
commands to the system is not adequate,  
this function can largely improve the  
system's voice recognition of the user. If  
your voice can be recognized sufficiently  
without using this function, you may not  
realize the added benefit of the function.  
To register your voice, the voice input  
command list must be read out. Read out  
the list when the vehicle is parked.  
Perform the registration in as quiet a place  
as possible (page 6-63).  
When the confirmation prompt function is  
turned off:  
(Ex. “Calling John's phone.”)  
The registration must be performed  
completely. The required time is a few  
minutes. The user needs to be seated in  
the driver's seat with the voice input  
command list for voice recognition  
learning open to the page indicated below.  
NOTE  
If the confirmation prompt function is turned  
off when making an emergency call, the system  
reads out and confirms the command before  
executing it.  
1. Press the voice recognition/hands-free  
switch with a short press.  
1. Press the voice recognition/hands-free  
switch with a short press.  
2. Say: [Beep] “Setup”  
2. Say: [Beep] “Voice training”  
3. Prompt:“Select one of the following:  
pairing options, confirmation prompts,  
select phone, language, or passcode...,  
or say “cancel” to return to main  
menu.”  
3. Prompt: “This operation must be  
performed in a quiet environment while  
the vehicle is stopped. See the owner's  
manual for the list of required training  
phrases. Press and release the phone  
button when you are ready to begin.  
Press and hold the phone button to  
cancel at any time.”  
4. Say: [Beep] “Confirmation prompts”  
6-76  
Interior Comfort  
Bluetooth Hands-Free  
4. Press the voice recognition/hands-free  
switch with a short press.  
NOTE  
After user voice registration is completed,  
voice guidance “Speaker enrollment is  
complete, returning to main menu” is  
announced.  
5. The voice guidance reads out the voice  
input command number (refer to the  
voice input command list for voice  
recognition learning). (Ex. “Please read  
phrase 1”)  
qDTMF (dual tone multi-  
frequency signal) transmission  
6. Say: [Beep] “0123456789” (Say the  
voice input command for voice  
recognition learning (1 to 8) according  
to the voice guidance.)  
This function is used when transmitting  
DTMF via the user's voice. The receiver  
of a DTMF transmission is generally a  
home telephone answering machine or a  
company's automated guidance call center  
(When you send tone signals back  
according to the voice guidance  
recording).  
7. Prompt: “Speaker enrollment is  
complete, returning to main menu.”  
Voice input command list for voice  
recognition learning  
1. Press the voice recognition/hands-free  
switch with a short press.  
When reading out, the following points  
must be observed:  
l
Read out the numbers one at a time  
2. Say: [Beep] “XXXX... send” (Say  
correctly and naturally.  
(For example, “1234” must be read out  
“one, two, three, four”, not “twelve, thirty  
four”.)  
DTMF code)  
3. Prompt: “Sending XXXX... (DTMF  
code)”  
l
Do not read out parentheses. “ (” and  
hyphens “-” are used for separating  
numbers in a phone number.  
Ex.  
“ (888) 555-1212” must be spoken “Eight,  
eight, eight, five, five, five, one, two, one,  
two.”  
Phrase  
Command  
0123456789  
1
2
3
4
5
6
7
8
(888) 555-1212  
Call  
Dial  
Setup  
Cancel  
Continue  
Help  
6-77  
Interior Comfort  
Bluetooth Hands-Free  
Safety Certification  
When Bluetooth Hands-  
Free cannot be used  
FCC ID: CB2MBLUEC07 IC:279B-  
MBLUEC07  
This device complies with Part 15 of the  
FCC Rules and with RSS-210 of Industry  
Canada. Operation is subject to the  
following two conditions:  
(1) This device may not cause harmful  
interference, and  
(2) This device must accept any  
interference received, including  
interference that may cause undesired  
operation.  
Bluetooth Hands-Free cannot be used  
under the following conditions:  
l
The mobile telephone is outside of the  
communication area.  
The mobile telephone has a  
l
malfunction.  
The mobile telephone is not connected  
l
to the hands-free unit equipped on the  
vehicle.  
The mobile telephone battery is weak.  
The mobile telephone is turned off.  
The mobile telephone is placed where  
l
l
l
WARNING  
radio reception is difficult.  
Changes or modifications not  
expressively approved by the party  
responsible for compliance could void  
the user's authority to operate the  
equipment.  
The term “IC: ” before the radio  
certification number only signifies that  
Industry Canada technical specifications  
were met.  
The antenna used for this transmitter must  
not be co-located or operating in  
conjunction with any other antenna or  
transmitter. End-users and installers must  
be provided with installation instructions  
and transmitter operating conditions for  
satisfying RF exposure compliance.  
6-78  
Interior Comfort  
Bluetooth Hands-Free  
Mazda Bluetooth Hands-  
Free Customer Service  
For toll-free Bluetooth Hands-Free  
customer service call 800-430-0153 or go  
to www.MazdaUSA.com/bluetooth for  
assistance.  
6-79  

Related Topics

Interior Comfort
Climate Control System Audio System Interior Equipment

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot