2012-2017 Mercedes A Class 4 Door Lights and windscreen wipers -> Interior lighting User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Lights and windscreen wipers -> Interior lighting for Your Mercedes A Class 4 Door Third Generation (2012-2017)

Interior lighting  
124  
Important safety notes  
If you are driving at speeds above approx-  
imately 55 km/h and no other road users  
are detected:  
The main-beam headlamps are switched on  
automatically. The K indicator lamp in  
the instrument cluster also lights up.  
If you are driving at speeds below approx-  
imately 45 km/h or other road users are  
detected or the roads are adequately lit:  
Themain-beamheadlampsareswitchedoff  
automatically. The K indicator lamp in  
the instrument cluster goes out. The _  
indicator lamp in the multifunction display  
remains lit.  
WARNING  
G
Adaptive Highbeam Assist does not recognise  
road users:  
R
R
R
who have no lights, e.g. pedestrians  
who have poor lighting, e.g. cyclists  
whose lighting is blocked, e.g. by a barrier  
In very rare cases, Adaptive Highbeam Assist  
recognises road users too late or not at all. In  
this, or in similar situations, the automatic  
main-beam headlamps will not be deactivated  
or activated regardless. There is a risk of an  
accident.  
Always carefully observe the traffic conditions  
and switch off the main-beam headlamps in  
good time.  
X
To deactivate: move the combination  
switch back to its normal position.  
The _ indicator lamp in the multifunc-  
tion display goes out.  
Adaptive Highbeam Assist cannot take into  
account road, weather or traffic conditions.  
Adaptive Highbeam Assist is only an aid. You  
are responsible for adjusting the vehicle's  
lighting to the prevailing light, visibility and  
traffic conditions.  
Headlamps misted up on the inside  
Certain climatic and physical conditions may  
cause moisture to form in the headlamp. This  
moisture does not affect the functionality of  
the headlamp.  
In particular, the detection of obstacles can  
be restricted if there is:  
R
poor visibility, e.g. due to fog, heavy rain or  
snow  
Interior lighting  
R
dirt on the sensors or if the sensors are  
obscured  
Overview of interior lighting  
Front overhead control panel  
Switching Adaptive Highbeam Assist  
on/off  
X
To switch on: turn the light switch to Ã.  
X
Press the combination switch beyond the  
pressure point in the direction of arrow :.  
The _ indicator lamp in the multifunc-  
tion display lights up when it is dark and the  
light sensor switches on the dipped-beam  
headlamps.  
If you are driving at speeds above approx-  
imately 45 km/h:  
The headlamp range is set automatically  
depending on the distance between the  
vehicle and other road users.  
:
p Switches the left-hand front reading  
lamp on/off  
c Switches the front interior lighting  
on  
;
Replacing bulbs  
125  
The interior lighting automatically switches  
on if you:  
=
?
A
B
v Switches the rear interior lighting  
on/off  
| Switches the front interior lighting/  
automatic interior lighting control off  
p Switches the right-hand front read-  
ing lamp on/off  
Switches the automatic interior lighting  
control on  
R
unlock the vehicle  
R
open a door  
R
remove the key from the ignition lock  
The interior lighting is activated for a short  
time when the key is removed from the igni-  
tion lock. This delayed switch-off can be  
adjusted using COMAND Online or Audio 20  
(see the separate operating instructions).  
Rear compartment control panel  
Manual interior lighting control  
X To switch the front interior lighting on:  
set the switch to the c position.  
X
To switch off the interior lighting: set the  
switch to the | position or (if the door is  
closed) to the centre position.  
X To switch the rear interior lighting on or  
off: press the u button.  
X To switch the reading lamp on or off:  
press the p button.  
:
p Switches the left-hand reading lamp  
on/off  
;
p Switches the right-hand reading  
lamp on/off  
Crash-responsive emergency lighting  
The interior lighting is activated automatically  
if the vehicle is involved in an accident.  
Interior lighting control  
General notes  
X To switch off the crash-responsive  
emergency lighting: press the hazard  
warning lamp button.  
In order to prevent the vehicle's battery from  
discharging, the interior lighting functions are  
automatically deactivated after some time  
except when the key is in position 2 in the  
ignition lock.  
or  
X
Lock and then unlock the vehicle using the  
key.  
The colour and brightness for the ambient  
lighting may be set using COMAND Online or  
Audio 20 (see the separate operating instruc-  
tions).  
Replacing bulbs  
Important safety notes  
WARNING  
G
Automatic interior lighting control  
Bulbs, lamps and plug connectors can  
become very hot during use. When replacing a  
bulb, you could burn yourself on these com-  
ponents. There is a risk of injury.  
X
To switch on: set the switch to centre  
position B.  
To switch off: set the switch to the |  
X
position.  
Z

Related Topics

Popular Owner Manuals