The exterior mirror on the front-passenger
side moves back to its original position:
R
as soon as you exceed a speed of
15 km/h
R
about ten seconds after you have disen-
gaged reverse gear
R
if you press button : for the exterior mir-
ror on the driver's side
Memory functions
Storing settings
G
WARNING
Only use the memory function on the driver's
side when the vehicle is stationary. You could
otherwise be distracted from the traffic con-
ditions by the seat moving of its own accord,
and as a result cause an accident.
G
WARNING
The memory function can still be used if the
key has been removed. For this reason, chil-
dren should never be left unsupervised in the
vehicle. Otherwise, they could adjust the
seats and become trapped.
With the memory function, you can store up
to three different settings, e.g. for three dif-
ferent people.
The following settings are stored as a single
memory preset:
R
position of the seat, backrest and head
restraint
R
driver's side: position of the exterior mir-
rors on the driver's and front-passenger
sides
X
Adjust the seat (Y page 88).
X
Adjust the exterior mirror on the driver's
side (Y page 91).
X
Briefly press the M memory button and
then press storage position button 1, 2 or
3 within three seconds.
The settings are stored in the selected pre-
set position. Atone sounds when the set-
tings have been completed.
Calling up astoredsetting
X
Press and hold the relevant storage posi-
tion button 1, 2 or 3 until the seat and
exteriormirrors are in the stored position.
i
The setting procedure is interrupted as
soon as you release the storage position
button.
94
Memory functions
Seats, steering wheel and mirrors
English 
