2005-2010 Mercedes B Class SUV Seats, steering wheel and mirrors -> Seats User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Seats, steering wheel and mirrors -> Seats for Your Mercedes B Class SUV First Generation (2005-2010)

Seats
Important safety notes
G
WARNING
The seats can still be adjusted when there is
no key in the ignition lock. For this reason,
children should never be left unsupervised in
the vehicle. They could adjust the seats and
become trapped.
G
WARNING
Only adjust the driver's seat when the vehicle
is stationary. You will otherwise be distracted
from the road and traffic conditions and you
could lose control of the vehicle as a result of
the seat moving. This could cause an acci-
dent.
G
WARNING
If you adjust the seat height carelessly, you or
others could be trapped and thereby injured.
Children in particular could unintentionally
press the buttons to electrically adjust the
seats and become trapped.
Take care that:
R
while moving the seats, your hands do not
get under the lever assembly of the seat
adjustment system.
R
children in the vehicle do not slide their
hands under the levers.
G
WARNING
Make sure that nobody can become trapped
when adjusting the seats.
Observe the notes on airbags.
Secure children as recommended; see the
"Children in the vehicle" section.
G
WARNING
Aseat belt can only offer its intended degree
of protection when the backrest is almost ver-
tical and the occupant is sitting upright. Avoid
seat positions that do not allow the seat belt
to be routed correctly. Adjust the backrest so
that it is as upright as possible. Never travel
with the backrest reclined too far backwards.
You could otherwise be seriously or even
fatally injured in the event of an accident or
sudden braking.
G
WARNING
Make sure that the back of your head is sup-
ported at eye level by the central area of the
head restraint. If your head is not supported
correctly by the head restraint, you could suf-
fer a severe neck injury in the event of an
accident. Never drive if the head restraints are
not engaged and set correctly.
!
To avoid damage to the seats and the seat
heating, observe the following information:
R
do not spill any liquids on the seats. If
liquid is spilled on the seats, dry them as
soon as possible.
R
if the seat covers are damp or wet, do not
switch on the seat heating. The seat
heating should also not be used to dry
the seats.
R
clean the seat covers as recommended;
see the "Interior care" section.
R
do not transport heavy loads on the
seats. Do not place sharp objects on the
seat cushions, e.g. knives, nails or tools.
The seats should only be occupied by
passengers, if possible.
R
when the seat heating is in operation, do
not cover the seats with insulating mate-
rials, e.g. blankets, coats, bags, seat cov-
ers, child seats or booster seats.
!
Make sure that there are no objects in the
footwell or behind the seats when moving
the seat back. There is a risk that the seats
and/or the objects could be damaged.
i
The head restraints in the frontand rear
seats can be removed.
For more information, contact a qualified
specialist workshop.
Seats
87
Seats, steering wheel and mirrors
Z
i Further related subjects:
R
Luggage compartment enlargement
(removing/folding the rearbench seat
forwards) (Y page 248)
Adjusting the seats manually
Seat fore-and-aft adjustment
X
Lift handle : and slide the seat forwards
or backwards.
X
Release lever : again.
Make sure that you hear the seat engage in
position.
Backrest angle
X
Relieve the pressure on the backrest.
X
Turn handwheel ? forwards or backwards.
Seat height
X
Pull handle = upwards or push it down
repeatedly until the seat has reached the
desired height.
Seat cushion angle
Adjust the angle so that your thighs are lightly
supported.
X
Turn handwheel ; forwards or backwards.
Adjusting the seats electrically
:
Head restraint height
;
Seat cushion angle
=
Seat height
?
Seat fore-and-aft adjustment
A
Backrest angle
i
You can store the seat settings using the
memory function (Y page 94).
Adjusting the head restraints
Adjusting the head restraints manually
Adjusting the head restraint height
X
To raise: pull the head restraint up to the
desired position.
X
To lower: press release catch : in the
direction of the arrow and push the head
restraint down to the desired position.
88
Seats
Seats, steering wheel and mirrors
Adjusting the head restraint fore-and-aft
position
This function allows you to adjust the dis-
tance between the head restraint and the
back of the head.
X
To move forwards: pull the head restraint
forwards in the direction of the arrow until
it engages.
There are a number of detents.
X
To move backwards: press and hold
release button : and push the head
restraint backwards.
X
When the head restraint is in the desired
position, release the buttonand make sure
thatthe head restraint is engaged in posi-
tion.
Adjusting the head restraints electri-
cally
X
To adjust the head restraint height: slide
the switch for head restraint adjustment
(Y page 88) up or down in the direction of
the arrow.
Rear seat head restraints
Adjusting the rear seat head restraint
height
X
To raise: pull the head restraint up to the
desired position.
X
To lower: press release catch : and push
the head restraint down until it is in the
desired position.
Removing and fitting the rear seat head
restraints
G
WARNING
Occupants should only travel sitting on seats
that have the head restraints fitted. This
reduces the risk of injury to the occupant in
the event of an accident.
X
Fold the seat backrest slightly forwards in
order to remove the head restraint
(Y page 248)(Y page 249).
X
To remove: pull the head restraint up to
the stop.
Seats
89
Seats, steering wheel and mirrors
Z
X
Press release catch : and pull the head
restraint out of the guides.
X
To refit: insert the head restraint so that
the notches on the bar are on the left when
viewed in the direction of travel.
X
Push the head restraint down until you hear
it engage in position.
Adjusting the 4-way lumbar support
You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back.
:
To raise the backrest contour
;
To soften the backrest contour
=
To lower the backrest contour
?
To harden the backrest contour
Switching the seat heating on/off
Switching on/off
G
WARNING
Repeatedly setting the seat heating to level
3 may result in excessive seat temperatures.
The health of passengers that have limited
temperature sensitivity or a limited ability to
react to excessively high temperatures may
be affected or they may even suffer burn-like
injuries. Therefore, do not use seat heating
level 3 repeatedly.
The three red indicator lamps in the button
indicate the heating level you have selected.
The system automatically switches down
from level 3 to level 2 after approximately
eight minutes.
The system automatically switches down
from level 2 to level 1 after approximately ten
minutes.
The system automatically switches off
approximately 20 minutes after it is set to
level 1.
X
Make sure that the key is in position 1 or
2 in the ignition lock.
X
To switch on: press button : repeatedly
until the desired heating level is set.
X
To switch off: press button : repeatedly
until all the indicator lamps go out.
i
If the battery voltage is too low, the seat
heating may switch off.
Problems with the seat heating
The seat heating has switched off prema-
turely or cannot be switched on. The vehicle's
electrical system voltage is too low because
too many electrical consumers are switched
on.
X
Switch off electrical consumers that you do
not need, such as the rear window heating
or interior lighting.
90
Seats
Seats, steering wheel and mirrors
Steering wheel
Important safety notes
G
WARNING
Only adjust the steering wheel when the vehi-
cle is stationary and make sure that it is
locked securely in position before driving off.
Driving without the steering wheel adjust-
ment mechanism being locked in position
may cause the steering wheel to move unex-
pectedly. As a result, the driver could lose
control of the vehicle. Before driving off make
sure that the steering wheel is properly locked
in position by trying to move it up and down.
Adjusting the steering wheel
:
Release lever
;
To adjust the steering wheel height
=
To adjust the steering wheel position
(fore-and-aft adjustment)
X
Push release lever : down completely.
The steering column is unlocked.
X
Adjust the steering wheel to the desired
position.
X
Push release lever : up completely.
The steering column is locked.
X
Check if the steering column is locked.
When doing so, try to push the steering
wheel up or down or try to move it in the
fore-and-aft direction.
Mirrors
Rear-view mirror
X
Anti-dazzle mode: flick anti-dazzle
switch : forwards or back.
Exterior mirrors
Adjusting the exterior mirrors
G
WARNING
The exterior mirrors reduce the size of the
image. Objects are actually closer than they
appear. You could misjudge the distance from
vehicles driving behind and cause an acci-
dent, e.g. when changing lane. For this rea-
son, make sure of the actual distance from the
vehicle driving behind by glancing over your
shoulder.
Mirrors
91
Seats, steering wheel and mirrors
Z

Related Topics

Popular Owner Manuals