Activating or deactivating location-based charging
#
Select Charging program, home or Charging
program, work
.
#
Activate or deactivate Select based on loca-
tion
.
When the function is activated, the vehicle's cur-
rent position is saved as one of the selected
options. When the address is reached again, a
brief query appears as to whether the respective
charging program should be selected.
Setting the departure time
The set departure times are used for the pre-entry
climate control of the vehicle.
#
Select Next departure time.
The following charging times can be selected:
R
individual charging times
R
a
Week profile
Setting an individual departure time
#
Select Add new timeand set the time.
or
#
Select ´ and adapt an existing departure
time.
Setting the repeat days
#
Select Add new timeand set the time.
#
Mark the relevant weekdays for which the
departure time will apply and conrm with
a.
or
#
Select ´ and edit existing repeat days.
Setting the maximum charge level
#
Select Maximum charge state.
#
Set the desired percentage.
The high-voltage battery is charged up to the
set percentage as a maximum.
%
The percentage can be set in increments of
10%.
%
As soon as the full charge level is reached, a
notication is shown in the media display that
the charging process is completed and the
journey may be continued.
Overview of the energy ow display in the multi-
media system
The active components of the hybrid system are
highlighted on the energy ow display. The energy
ow between the individual components is shown
in colour.
The components displayed are:
R
State of charge of the high-voltage battery
R
Combustion engine
R
Energy ow
R
High-voltage battery
The energy ow is shown in dierent colours
depending on the operating status:
R
White: constant energy ow
R
Red: high energy ow (boost eect)
R
Green: low-emission energy ow in the case of
recuperation, electric mode and charging the
high-voltage battery
438
MBUX multimedia system
F247 0072 02
English 
