2014-2021 Mercedes C Class 4 Door General notes -> Declaration of conformity User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

General notes -> Declaration of conformity for Your Mercedes C Class 4 Door Fourth Generation (2014-2021)

General notes 25  
Nigeria only:  
Vehicles with a 48 V on-board electrical system  
contain high voltage components. These compo‐ lation UN R10.  
nents are marked with a high voltage label:  
according to the currently valid version of Regu‐  
Connection and use of the wireless communica‐  
tion equipment in this vehicle are permitted by  
the Nigerian Communications Commission.  
Wireless vehicle components  
Thailand only:  
For EU and EFTA countries only:  
The telecommunication equipment in this vehicle  
meets the requirements of the National Broad‐  
casting and Telecommunications Commission  
(NBTC).  
The following information applies to all wireless  
components of the vehicle and of the informa‐  
tion systems and communication devices inte‐  
grated in the vehicle:  
The wireless components of this vehicle comply  
with the basic requirements and all other rele‐  
vant conditions of Directive 2014/53/EU. You  
can obtain further information from a Mercedes-  
Benz Service Centre.  
Ukraine only:  
The manufacturer hereby declares that the wire‐  
less vehicle components meet the technical reg‐  
ulations for two-way radios. You can obtain fur‐  
ther information from a Mercedes-Benz Service  
Centre.  
All work on high voltage components must be  
carried out at a qualified specialist workshop.  
Brazil only:  
Note on the two-way radio systems in the vehi‐  
cle:  
These systems are not protected from harmful  
interference and must not cause interference in  
duly approved systems.  
Wireless applications in the vehicle  
Besides the typical frequencies for mobile com‐  
munications, cars from Mercedes-Benz make  
use of the following automotive radio applica‐  
tions:  
Declaration of conformity  
Electromagnetic compatibility  
The electromagnetic compatibility of the vehicle  
components has been checked and certified  
26 General notes  
Wireless applications in the vehicle  
Technology  
Frequency range  
Transmission output/magnetic field  
strength  
Remote keyless entry  
20 kHz (9–90 kHz)  
≤ 72 dBμA/m at 10 m  
≤ 42 dBμA/m at 10 m  
≤ 42 dBμA/m at 10 m  
Wireless power transmission  
105 kHz (90–119 kHz)  
125 kHz (119–135 kHz)  
Remote keyless entry  
Wireless power transmission  
Near-field communication  
13.553–13.567 MHz  
≤ 42 dBμA/m at 10 m  
≤ 10 mW e.r.p.  
Remote keyless entry, garage door opener, tyre  
pressure monitoring  
433 MHz (433.05–434.79 MHz)  
Heater booster function remote control, garage  
door opener  
868 MHz (868.0–868.6 MHz)  
≤ 25 mW e.r.p.  
≤ 25 mW e.r.p.  
≤ 100 mW e.i.r.p.  
≤ 25 mW e.i.r.p.  
Heater booster function remote control, garage  
door opener  
869 MHz (868.7–869.2 MHz)  
Bluetooth®, Kleer, RLAN, general remote con‐  
trols, wireless headphones  
2.4 GHz ISM band (2400–2483.5 MHz)  
5.8 GHz UNII-3 (5725–5875 MHz)  
Interior monitoring radar, RLAN  
General notes 27  
Technology  
Frequency range  
Transmission output/magnetic field  
strength  
Remote keyless entry  
7.25 GHz UWB (6.0–8.5 GHz)  
≤ -41.3 dBm/MHz e.i.r.p mean ≤ 0 dBm/MHz  
e.i.r.p. peak  
24 GHz ISM radar  
24 GHz UWB radar  
24.05–24.25 GHz*  
24.25–26.65 GHz*  
≤ 100 mW e.i.r.p.  
≤ -41.3 dBm/MHz e.i.r.p mean ≤ 0 dBm/50 MHz  
e.i.r.p. peak  
76 GHz radar  
76–77 GHz  
≤ 55 dBm peak e.i.r.p.  
NFC:  
NFC:  
Carsharing module  
13.553–13.567 MHz  
Bluetooth:  
≤ 42 dBμA/m at 10 m  
Bluetooth:  
2402–2480 MHz  
≤ + 4 dBm (power category 2)  
Original CE declaration of conformity  
Bosal Hungary KFT hereby declares that  
Jack: Daimler jack products  
* Model series launched on the market before  
April 2016  
A 205 580 00 00  
A 212 580 00 18  
A 212 580 04 18  
A 231 580 00 18  
Jack  
with  
serial no.:  
Copy and translation of the original declaration  
of conformity:  
28 General notes  
complies with the following directives:  
EU2006/42/EC  
The following standard has been observed dur‐  
ing development: EN ISO 12100  
This publication provides authorisation to  
inspect (equipment), prepare technical docu‐  
mentation and provide authentication.  
The jack may not be used before all the details  
have been defined and confirmed, as described  
in the Owner's Manual for the jack. If this is not  
the case, the jack may not be used.  
2014/30/EU  
Applied harmonised standards, in particular:  
DIN EN 55014-1: 2012  
DIN EN 55014-2: 2016  
Manufacturer: Dunlop Tech GmbH  
Address: Offenbacher Landstrasse 8, 63456  
Hanau  
Authorised representative: IMS dept.  
Date: December 2019  
BOSAL Automotive  
Carrier and Protection 9350-0  
System GmbH  
Steinbeisstraße 6  
71706 Markgröningen Email:  
Phone: +49 7145  
Fax: +49 7145  
9350-239  
TIREFIT kit  
Signature: IMS-AE, IMS-AE-L  
Copy and translation of the original declarations  
of conformity:  
[Signature]  
[Signature]  
Method 2  
[Name of signatory]  
R&D Manager BHUK  
[Name of signatory]  
Project Engineer  
Method 1  
EC declaration of conformity  
In accordance with EC Directive 2006/42/EC  
EC declaration of conformity  
In accordance with EC Directive 2006/42/EC  
We hereby declare that the product  
Product designation: Daimler electric air pump  
Model designation: 0855, DT/UW 200036 - LK2  
MB part no.: A 000 583 21 02  
We hereby declare that the product  
Product designation: Daimler electric air pump  
Model designation: 0852, DT/UW 200016 - LK1  
MB part no.: A 000 583 22 02  
complies with the following relevant regulations:  
2014/30/EU  
complies with the following relevant regulations:  

Related Topics

Popular Owner Manuals