General notes 29
NOTE Battery discharging from using
devices connected to the diagnostics
connection
Applied harmonised standards, in particular:
DIN EN 55014-1: 2012
DIN EN 55014-2: 2016
#
Only connect devices to the diagnostics
connection of the vehicle that have
been tested for suitability and are safe.
*
Manufacturer: Dunlop Tech GmbH
Address: Offenbacher Landstrasse 8, 63456
Hanau
Authorised representative: IMS dept.
Date: December 2019
Signature: IMS-AE, IMS-AE-L
Using devices at the diagnostics connection
drains the battery.
&
WARNING Risk of accident due to
objects in the driver's footwell
#
Check the charge level of the battery.
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardises the operating and road
safety of the vehicle.
#
If the charge level is low, charge the
battery, e.g. by driving a considerable
distance.
Connecting equipment to the diagnostics con‐
nection can lead to emissions monitoring infor‐
mation being reset, for example. This may lead
to the vehicle failing to meet the requirements of
the next emissions inspection during the main
inspection.
#
Stow all objects in the vehicle securely
so that they cannot get into the driver's
footwell.
Diagnostics connection
The diagnostics connection is only intended for
the connection of diagnostic devices at a quali‐
fied specialist workshop.
#
Always fit the floor mats securely and
as prescribed in order to ensure that
there is always sufficient room for the
pedals.
&
WARNING Risk of accident due to con‐
necting devices to the diagnostics con‐
nection
#
Do not use loose floor mats and do not
place floor mats on top of one another.
If you connect the devices to the diagnostics
connection of the vehicle, the function of the
vehicle systems and operating safety may be
impaired.
English 
