Get Driving and parking -> DYNAMIC SELECT switch Guide for Mercedes CLA 4 Door Second Generation (2019-2024)

ter of display 4. The range displayed does not

indicate a xed reduction in consumption.

DDYNYNAMIC SELECT switchAMIC SELECT switch

FFunction of tunction of the Dhe DYNYNAMIC SELECT switchAMIC SELECT switch

NOOTETE Mercedes-AMG vehicles

Observe the notes in the Supplement.

You could otherwise fail to recognize

dangers.

Depending on the engine and equipment, the

vehicle has dierent drive programs.

Use the DYNAMIC SELECT switch to change

between the following drive programs.

The drive program selected appears in the instru-

ment display.

= Individual

Individual settings

Sport

Continues to oer stability but with a sporty

setup

Allows the sporty driver a more active driving

style

Only suitable for good road conditions, a dry

road surface and a clear stretch of road

Comfort

Comfortable and economical driving

Balance between traction and stability

Recommended for all road conditions

;

Eco

Only available for vehicles with automatic

transmission

Particularly economical driving

Balance between traction and stability

Recommended for all road conditions

The ESP

settings in the drive programs ;

and A are designed for stability. Therefore,

choose one of these driving programs, espe-

cially when transporting roof loads, in trailer

operation and when the vehicle is fully loaded

or fully occupied.

Depending on the drive program, the following

systems change their characteristics:

Drive

engine and transmission management

Active Distance Assist DISTRONIC

ESP

Vehicles witehicles with adaph adaptivtive dame damping adjusping adjustmenttment::

suspension

Electric power steering

Selecting tSelecting the drhe drivive pre progrogramam

Depending on the equipment, the vehicle is

equipped with either a switch or a button.

140140

Driving and parking

Press DYNAMIC SELECT switch 1 forwards

or backwards.

The drive program selected appears in the

instrument display.

Press DYNAMIC SELECT button 2.

The DYNAMIC SELECT menu appears in the

instrument display.

Press DYNAMIC SELECT button 2 again.

The chosen drive program appears.

CongurConguringing DDYNYNAMIC SELECT (multimedia syAMIC SELECT (multimedia sys-s-

ttem)em)

Multimedia system:

Settings

Vehicle

DYNAMIC SELECT

SeSetting drtting drivive pre progrogram Iam I

Select Individual Configuration.

Select and set a category.

Switc

Switching thing the rhe restestororation displaation display on ory on or oo

Activate or deactivate Request at Start.

Function on:unction on: the next time the vehicle is started a

prompt appears asking whether the last active

drive program should be restored. If the ECO

start/stop function was deactivated, an additional

prompt appears asking if the function should

remain deactivated.

The prompt appears only if the previously

active settings deviate from the standard set-

tings.

Functionunction o:o: the next time the vehicle is started

the A drive program is set automatically. The

Driving and parking

141

ECO start/stop function is activated automati-

cally.

This function must be activated for each user

prole separately. Only when this function is

activated will the drive program and ECO

start/stop setting for the previous journey be

saved for the respective user prole.

DisplaDisplaying vying vehicle dataehicle data

Multimedia system:

Info

Select Vehicle.

The vehicle data is displayed.

DisplaDisplaying engine dataying engine data

Multimedia system:

Info

Select Engine.

The engine data is displayed.

The actual (maximum) values that can be ach-

ieved for engine output and engine torque

may deviate from the certied values within

the country-specic guidelines for permissible

tolerances (basis: UN-ECE No. 85 or country-

specic guidelines).

Inuencing variables that can inuence this

are, for example:

Sea level

Fuel grade

Outside temperature

Operating temperature of the engine

The values displayed serve only as orienta-

tion. The values for engine output and engine

torque shown on the media display may devi-

ate from the actual values.

Calling up tCalling up the fuel consumphe fuel consumption indicattion indicatoror

Multimedia system:

Info

Select Consumption.

The current and average fuel consumption is

displayed.

AAututomatic tromatic transmissionansmission

DIRECT SELECT levDIRECT SELECT leverer

FFunction of tunction of the DIRECT SELECT levhe DIRECT SELECT leverer

WARNINGARNING Risk of accident due to incor-

rect gearshiing

If the engine speed is higher than the idle

speed and you engage the transmission posi-

tion h or k, the vehicle may accelerate

sharply.

If you engage the transmission position

h or k when the vehicle is at a stand-

still, always depress the brake pedal

rmly and do not accelerate at the same

time.

142142

Driving and parking

Driving and parking -> DYNAMIC SELECT switch for Your Mercedes CLA 4 Door Second Generation (2019-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals