Get Driving and parking -> Parking Guide for Mercedes CLA 4 Door Second Generation (2019-2024)

Only refuel with fuel that has at least the octane

number specied in the information label in the

fuel ller ap. Otherwise, engine output can be

reduced and fuel consumption increased.

Fuel ller ap

Bracket for fuel ller cap

Tire pressure table

QR code for rescue card

Fuel type

Press on the back area of fuel ller ap 1.

Turn the fuel ller cap counter-clockwise and

remove it.

Insert fuel ller cap from above into bracket

Completely insert the pump nozzle into the

tank ller neck, hook in place and refuel.

Only ll the fuel tank until the pump nozzle

switches o.

Replace the cap on the ller neck and turn

clockwise until it engages audibly.

Close fuel ller ap 1.

PPararkingking

PPararking tking the vhe vehicleehicle

WARNINGARNING Risk of accident and injury

caused by an insuciently secured vehi-

cle rolling away

If the vehicle is not securely parked su-

ciently, it can roll away in an uncontrolled way

even at a slight downhill gradient.

On uphill or downhill gradients, turn the

front wheels so that the vehicle rolls

towards the curb if it starts moving.

Apply the parking brake.

Switch the transmission to position j.

WARNINGARNING Risk of re caused by hot

exhaust system parts

Flammable materials such as leaves, grass or

twigs may ignite.

Park the vehicle so that no ammable

material can come into contact with hot

vehicle components.

Driving and parking

149

In particular, do not park on dry grass-

land or harvested grain elds.

WARNINGARNING Risk of accident and injury due

to children le unattended in the vehicle

If children are le unsupervised in the vehicle,

they could, in particular:

open doors, thereby endangering other

persons or road users.

get out and be struck by oncoming trac.

operate vehicle equipment and become

trapped, for example.

In addition, the children could also set the

vehicle in motion, for example by:

releasing the parking brake.

changing the transmission position.

starting the vehicle.

Never leave children unattended in the

vehicle.

When leaving the vehicle, always take the

SmartKey with you and lock the vehicle.

Keep the vehicle SmartKey out of reach

of children.

NOOTETE Damage to the vehicle due to it roll-

ing away

Always secure the vehicle against rolling

away.

Bring the vehicle to a standstill by pressing the

brake pedal.

On gradients, turn the front wheels so that the

vehicle will roll towards the curb if it starts

moving.

Apply the electric parking brake.

VVehicles witehicles with auth automatic tromatic transmission:ansmission: Engage

transmission position j in a stationary vehi-

150150

Driving and parking

cle with the brake pedal applied

(/ page 144).

Switch o the vehicle by pressing button 1.

Release the service brake slowly.

Get out of the vehicle and lock it.

When you park the vehicle, you can still oper-

ate the side windows and the panoramic slid-

ing sunroof for approximately four minutes if

the driver's door is closed.

GarGaragage door openere door opener

PrProgrogramming buttamming buttons fons for tor the ghe gararagage door openere door opener

DANANGERGER Risk of fatal injuries caused by

exhaust gases

Combustion engines emit poisonous exhaust

gases, such as carbon monoxide. Inhaling

these exhaust gases is hazardous to health

and leads to poisoning.

Never run the vehicle and, if present, the

stationary heater indoors without su-

cient ventilation.

WARNINGARNING Risk of injury by becoming

trapped when opening and closing a

garage door

When you operate or program a garage door

with an integrated garage door opener, per-

sons can become trapped or struck by the

garage door if they stand within its range of

movement.

Always make sure that nobody is within

the range of the garage door's move-

ment.

Only operate the following doors using the garage

door opener:

Doors with a safety stop and reversing feature

Doors which conform to the current U.S.

safety standards

Before programming the garage door opener, park

the vehicle outside the garage. Make sure that the

vehicle is switched on but not started.

Reqequiruirements:ements:

The vehicle has been parked outside the

garage or outside the range of movement of

the door.

The vehicle is switched on.

The vehicle has not been started.

The garage door opener function is always

available when the vehicle is switched on.

Driving and parking

151

Check if the transmitter frequency of the

remote control has the frequency range of

280 to 868 MHz.

Radio equipment approval number:

NZLMUAHL5 (USA)

4112A-MUAHL5 (Canada)

Press and hold button 1, 2 or 3 that you

wish to program.

Indicator lamp

4 ashes yellow.

It can take up to 20 seconds before the indi-

cator lamp ashes yellow.

Release the previously pressed button.

Indicator lamp 4 continues to ash yellow.

Point remote control 5 from a distance of

0.4 in (1 cm) to 3 in (8 cm) towards button

1, 2 or 3.

Press and hold button 6 of remote control

5 until one of the following signals appears:

Indicator lamp

4 lights up green continu-

ously. Programming is complete.

Indicator lamp

4 ashes green. Program-

ming was successful. Additionally, syn-

chronization of the rolling code with the

door system must be carried out.

If indicator lamp 4 does not light up or ash

green: repeat the procedure.

Release all of the buttons.

The remote control for the door drive is not

included in the scope of delivery of the garage

door opener.

Sync

Synchrhronizing tonizing the rhe rolling codeolling code

RReqequiruirements:ements:

The door system uses a rolling code.

The vehicle must be within range of the garage

door or door drive.

The vehicle as well as persons and objects are

located outside the range of movement of the

door.

Press the programming button on the door

drive unit.

Initiate the next step within approximately

30 seconds.

Press previously programmed button 1, 2

or 3 repeatedly until the door closes.

When the door closes, programming is com-

pleted.

Please also read the operating instructions for

the door drive.

Trroubleshoooubleshooting when prting when progrogramming tamming the rhe remoteemote

contrcontrolol

Check if the transmitter frequency of remote

control 5 is supported.

Replace the batteries in remote control 5.

Hold remote control 5 at various angles from

a distance of 0.4 in (1 cm) to 3 in (8 cm) front

of the inside rearview mirror. You should test

every position for at least 25 seconds before

trying another position.

Hold remote control 5 at the same angles at

various distances in front of the inside rear-

view mirror. You should test every position for

at least 25 seconds before trying another

position.

152152

Driving and parking

On remote controls that transmit only for a

limited period, press button 6 on remote

control

5 again before transmission ends.

Angle the antenna line of the garage door

opener unit towards the remote control.

It is possible that older garage doors cannot

be operated using the remote control in the

inside rearview mirror even aer you have

successfully performed the measures descri-

bed above. If this is the case, contact the

HomeLink

Hotline.

Support and additional information on pro-

gramming:

On the toll free HomeLink

Hotline on

1-800-355-3515

On the Internet at

www.

Opening or closing t

Opening or closing the ghe gararagage doore door

RReqequiruirements:ements:

The corresponding button is programmed to

operate the door.

Press and hold buttons 1, 2 or 3 until the

door opens or closes.

If indicator lamp 4 ashes yellow aer

approximately 20 seconds: press and hold the

previously pressed button again until the door

opens or closes.

Clear

Clearing ting the ghe gararagage door opener memorye door opener memory

Press and hold buttons 1 and 3.

Indicator lamp

4 lights up yellow.

If indicator lamp 4 ashes green: release

buttons

1 and 3.

The entire memory has been deleted.

ElectrElectric paric parking brking brakeake

FFunction of tunction of the electrhe electric paric parking brking brakake (apple (applyingying

autautomaticallomatically)y)

WARNINGARNING Risk of accident and injury due

to children le unattended in the vehicle

If children are le unsupervised in the vehicle,

they could, in particular:

open doors, thereby endangering other

persons or road users.

get out and be struck by oncoming trac.

operate vehicle equipment and become

trapped, for example.

In addition, the children could also set the

vehicle in motion, for example by:

releasing the parking brake.

changing the transmission position.

starting the vehicle.

Never leave children unattended in the

vehicle.

Driving and parking

153

When leaving the vehicle, always take the

SmartKey with you and lock the vehicle.

Keep the vehicle SmartKey out of reach

of children.

The electrThe electric paric parking brking brakake is applied if te is applied if the trhe trans-ans-

mission is in positionmission is in position jj and one of tand one of the fhe folloollowingwing

conditions isconditions is fullled:fullled:

The vehicle is switched o.

The seat belt tongue is not inserted in the seat

belt buckle of the driver's seat and the driver's

door is opened.

To prevent application: pull the handle of the

electric parking brake (/ page 155).

In t

In the fhe folloollowing situations, twing situations, the electrhe electric paric parkingking

brbrakake is also applied:e is also applied:

The HOLD function is keeping the vehicle sta-

tionary.

Active Parking Assist is keeping the vehicle

stationary.

Active Distance Assist DISTRONIC is bringing

the vehicle to a standstill.

In addition, one of t

In addition, one of the fhe folloollowing conditionswing conditions

musmust bet be fullled:fullled:

The vehicle is switched o.

The seat belt tongue is not inserted in the

seat belt buckle of the driver's seat and

the driver's door is opened.

There is a system malfunction.

The power supply is insucient.

The vehicle is stationary for a lengthy

period.

When the electric parking brake is applied, the

red F (USA) or ! (Canada) indicator lamp

lights up in the instrument cluster.

The electric parking brake is not automatically

applied if the vehicle is switched o by the

ECO start/stop function.

Function of tunction of the electrhe electric paric parking brking brakake (re (releasingeleasing

autautomaticallomatically)y)

The electrThe electric paric parking brking brakake is re is released when teleased when thehe

ffolloollowing conditions arwing conditions aree fullled:fullled:

The driver's door is closed.

The vehicle has been started.

Vehicles witehicles with auth automatic tromatic transmission:ansmission: The

transmission is in position h or k and you

depress the accelerator pedal or you shi

from transmission position j to h or k

when on level ground.

If the transmission is in position k, the trunk

lid must be closed.

The seat belt tongue is inserted into the seat

belt buckle of the driver's seat.

If the seat belt tongue is not inserted into the

seat belt buckle of the driver's seat, one of the

following conditions must be fullled:

You shi from transmission position j.

You have previously driven at speeds

greater than 2 mph (3 km/h).

When the electric parking brake is released, the

red F (USA) or ! (Canada) indicator lamp

in the instrument cluster goes out.

154154

Driving and parking

ApplApplying/rying/releasing teleasing the electrhe electric paric parking brking brakeake

manuallymanually

ApplApplyingying

Push handle 1.

The red F (USA) or ! (Canada) indica-

tor lamp lights up in the instrument cluster.

The electric parking brake is only securely

applied if the red F (USA) or ! (Can-

ada) indicator lamp is lit continuously.

Releasingeleasing

Switch on the vehicle.

Pull handle 1.

The red F (USA) or ! (Canada) indica-

tor lamp in the instrument cluster goes out.

Emerg

Emergency brency brakingaking

Press and hold handle 1.

As long as the vehicle is driving, the

Please

Release Parking Brake

message is displayed

and the red F (USA) or ! (Canada)

indicator lamp ashes.

When the vehicle has been braked to a stand-

still, the electric parking brake is applied. The

red F (USA) or ! (Canada) indicator

lamp lights up in the instrument cluster.

InfInforormation on collision detmation on collision detection on a parkection on a parkeded

vvehicleehicle

If a collision is detected when the tow-away alarm

is armed on a locked vehicle, you will receive a

notication in the multimedia system when you

switch the vehicle on.

You will receive information about the following

points:

The area of the vehicle that may have been

damaged.

The force of the impact.

The following situation can lead to inadvertent

activation:

The parked vehicle is moved, for example, in a

two-story garage.

Deactivate the tow-away alarm in order to

prevent inadvertent activation. If you deacti-

vate the tow-away alarm, collision detection

will also be deactivated.

Driving and parking

155

If the battery is severely discharged, the func-

tion for detecting a collision on a parked vehi-

cle is automatically deactivated to facilitate

the next engine start.

Syst

System limitsem limits

Detection may be restricted in the following situa-

tions:

The vehicle is damaged without impact, for

example, if an outside mirror is torn o or the

paint is damaged by a key

An impact occurs at low speed

The electric parking brake is not applied

NNoottes on pares on parking tking the vhe vehicle fehicle for an eor an extxtendedended

perperiodiod

If you leave the vehicle parked for longer than six

weeks, it may suer damage through disuse.

The 12 V battery may also be impaired or dam-

aged by heavy discharging.

Vehicles witehicles with auth automatic tromatic transmission:ansmission: Do not dis-

connect the 12 V battery even if the vehicle is le

idle for a lengthy period.

Further information can be obtained at a

qualied specialist workshop.

SSttandbandby mode (ey mode (extxtension of tension of the sthe startarter batter batterery'sy's

perperiod out of use)iod out of use)

SSttandbandby mode functiony mode function

This function is not available for all models.

If standby mode is activated, energy loss will be

minimized during extended periods of non-opera-

tion.

Standby mode is characterized by the following:

The starter battery is preserved.

The maximum non-operational time appears in

the media display.

The connection to online services is interrup-

ted.

The ATA (anti-the alarm system) is not availa-

ble.

The interior motion sensor and tow-away

alarm functions are not available.

The function for detecting collisions on a

parked vehicle is not available.

If the following conditions are fullled, standby

mode can be activated or deactivated using the

multimedia system:

The vehicle is switched on.

The vehicle has not been started.

Exceeding the vehicle's displayed non-operational

time may cause inconvenience; i.e. it cannot be

guaranteed that the starter battery will reliably

start the vehicle.

Charge the starter battery in the following situa-

tions:

The vehicle's non-operational time must be

extended.

The

Battery Charge Insufficient for Standby

Mode

message appears in the media display.

Standby mode is automatically deactivated

when the vehicle is switched on.

Activctivating/deactivating/deactivating stating standbandby mode (pary mode (parkingking

tthe vhe vehicle fehicle for an eor an extxtended perended period)iod)

RReqequiruirements:ements:

The engine is switched o.

156156

Driving and parking

Multimedia system:

Settings

Vehicle

Activate or deactivate Standby Mode.

Select Yes.

DrDriving and driving and driving safeiving safety syty syststemsems

DrDriving systiving systems and yems and your rour responsibilityesponsibility

Your vehicle is equipped with driving systems

which assist you in driving, parking and maneuver-

ing the vehicle. The driving systems are only aids.

They are not a substitute for your attention to the

surroundings and do not relieve you of your

responsibility pertaining to road trac law. The

driver is always responsible for maintaining a safe

distance to the vehicle in front, for vehicle speed,

for braking in good time and for staying in lane.

Pay attention to the trac conditions at all times

and intervene when necessary. Be aware of the

limitations regarding the safe use of these sys-

tems.

Driving systems can neither reduce the risk of

accident if you fail to adapt your driving style nor

override the laws of physics. They cannot always

take into account road, weather or trac condi-

tions.

InfInforormation on vmation on vehicle sensorehicle sensors and camers and camerasas

Some driving and driving safety systems use cam-

eras as well as radar or ultrasonic sensors to

monitor the area in front of, behind or next to the

vehicle.

Multifunction camera

Cameras in the outside mirrors

Front radar

Front camera

Corner radars

Ultrasonic sensors

Rear view camera

WARNINGARNING Risk of accident due to restric-

ted detection performance of vehicle sen-

sors and cameras

If the area around vehicle sensors or cameras

is covered, damaged or dirty, certain driving

and safety systems cannot function correctly.

There is a risk of an accident.

Keep the area around vehicle sensors or

cameras clear of any obstructions and

clean.

Have damage to the bumper, radiator

grille or stone chipping in the area of the

front and rear windows repaired at a

qualied specialist workshop.

Driving and parking

157

Driving and parking -> Parking for Your Mercedes CLA 4 Door Second Generation (2019-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals