#
Have the vehicle and SmartKey checked at a
qualied specialist workshop.
Ther
There is inte is interferfererence frence from a powom a powererful rful radio signaladio signal
soursourcece
Possible causes if the function of KEYLESS-GO is
impaired:
R
High voltage power lines
R
Mobile phones
R
Electronic devices (notebooks, tablets)
R
Shielding due to metal objects or induction
loops for electrical gate systems or automatic
barriers
#
Make sure that there is sucient distance
between the SmartKey and the potential
source of interference.
AActivctivating/deactivating/deactivating tating the authe automatic locomatic locking fking fea-ea-
ture
ture
The vehicle is locked automatically when the vehi-
cle is switched on and the wheels are turning
faster than walking pace.
#
TTo activo activatate:e: press and hold button 2 for
approximately ve seconds until an acoustic
signal sounds.
#
TTo deactivo deactivatate:e: press and hold button 1 for
approximately ve seconds until an acoustic
signal sounds.
The red indicator lamp on button
2 lights up
once the vehicle is locked.
In the following situations, there is a danger of
being locked out when the function is activated:
R
While the vehicle is being tow-started or
pushed
R
If the vehicle is being tested on a roller dyna-
mometer
LocLocking/unlocking/unlocking tking the vhe vehicle witehicle with th the emer-he emer-
ggency keyency key
LocLocking/unlocking/unlocking tking the drhe driviver's door witer's door with th thehe
emergemergency keyency key
%
If you wish to lock the vehicle entirely using
the emergency key, rst press the button for
locking from the inside while the driver's door
is open. Then proceed to lock the driver's
door using the emergency key.
7272
Opening and closing